diff options
Diffstat (limited to 'include/linux/brcmphy.h')
| -rw-r--r-- | include/linux/brcmphy.h | 203 |
1 files changed, 186 insertions, 17 deletions
diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h index d0bd226d6bd9..028b3e00378e 100644 --- a/include/linux/brcmphy.h +++ b/include/linux/brcmphy.h @@ -11,11 +11,13 @@ #define PHY_ID_BCM50610 0x0143bd60 #define PHY_ID_BCM50610M 0x0143bd70 +#define PHY_ID_BCM5221 0x004061e0 #define PHY_ID_BCM5241 0x0143bc30 #define PHY_ID_BCMAC131 0x0143bc70 #define PHY_ID_BCM5481 0x0143bca0 #define PHY_ID_BCM5395 0x0143bcf0 #define PHY_ID_BCM53125 0x03625f20 +#define PHY_ID_BCM53128 0x03625e10 #define PHY_ID_BCM54810 0x03625d00 #define PHY_ID_BCM54811 0x03625cc0 #define PHY_ID_BCM5482 0x0143bcb0 @@ -31,6 +33,8 @@ #define PHY_ID_BCM89610 0x03625cd0 #define PHY_ID_BCM72113 0x35905310 +#define PHY_ID_BCM72116 0x35905350 +#define PHY_ID_BCM72165 0x35905340 #define PHY_ID_BCM7250 0xae025280 #define PHY_ID_BCM7255 0xae025120 #define PHY_ID_BCM7260 0xae025190 @@ -41,6 +45,7 @@ #define PHY_ID_BCM7366 0x600d8490 #define PHY_ID_BCM7346 0x600d8650 #define PHY_ID_BCM7362 0x600d84b0 +#define PHY_ID_BCM74165 0x359052c0 #define PHY_ID_BCM7425 0x600d86b0 #define PHY_ID_BCM7429 0x600d8730 #define PHY_ID_BCM7435 0x600d8750 @@ -48,6 +53,7 @@ #define PHY_ID_BCM7439 0x600d8480 #define PHY_ID_BCM7439_2 0xae025080 #define PHY_ID_BCM7445 0x600d8510 +#define PHY_ID_BCM7712 0x35905330 #define PHY_ID_BCM_CYGNUS 0xae025200 #define PHY_ID_BCM_OMEGA 0xae025100 @@ -60,19 +66,12 @@ #define PHY_BCM_OUI_5 0x03625e00 #define PHY_BCM_OUI_6 0xae025000 -#define PHY_BCM_FLAGS_MODE_COPPER 0x00000001 -#define PHY_BCM_FLAGS_MODE_1000BX 0x00000002 -#define PHY_BCM_FLAGS_INTF_SGMII 0x00000010 -#define PHY_BCM_FLAGS_INTF_XAUI 0x00000020 -#define PHY_BRCM_WIRESPEED_ENABLE 0x00000100 -#define PHY_BRCM_AUTO_PWRDWN_ENABLE 0x00000200 -#define PHY_BRCM_RX_REFCLK_UNUSED 0x00000400 -#define PHY_BRCM_STD_IBND_DISABLE 0x00000800 -#define PHY_BRCM_EXT_IBND_RX_ENABLE 0x00001000 -#define PHY_BRCM_EXT_IBND_TX_ENABLE 0x00002000 -#define PHY_BRCM_CLEAR_RGMII_MODE 0x00004000 -#define PHY_BRCM_DIS_TXCRXC_NOENRGY 0x00008000 -#define PHY_BRCM_EN_MASTER_MODE 0x00010000 +#define PHY_BRCM_AUTO_PWRDWN_ENABLE 0x00000001 +#define PHY_BRCM_RX_REFCLK_UNUSED 0x00000002 +#define PHY_BRCM_CLEAR_RGMII_MODE 0x00000004 +#define PHY_BRCM_DIS_TXCRXC_NOENRGY 0x00000008 +#define PHY_BRCM_EN_MASTER_MODE 0x00000010 +#define PHY_BRCM_IDDQ_SUSPEND 0x00000020 /* Broadcom BCM7xxx specific workarounds */ #define PHY_BRCM_7XXX_REV(x) (((x) >> 8) & 0xff) @@ -90,7 +89,9 @@ #define MII_BCM54XX_EXP_DATA 0x15 /* Expansion register data */ #define MII_BCM54XX_EXP_SEL 0x17 /* Expansion register select */ +#define MII_BCM54XX_EXP_SEL_TOP 0x0d00 /* TOP_MISC expansion register select */ #define MII_BCM54XX_EXP_SEL_SSD 0x0e00 /* Secondary SerDes select */ +#define MII_BCM54XX_EXP_SEL_WOL 0x0e00 /* Wake-on-LAN expansion select register */ #define MII_BCM54XX_EXP_SEL_ER 0x0f00 /* Expansion register select */ #define MII_BCM54XX_EXP_SEL_ETC 0x0d00 /* Expansion register spare + 2k mem */ @@ -136,6 +137,7 @@ #define MII_BCM54XX_AUXCTL_SHDWSEL_MISC 0x07 #define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_WIRESPEED_EN 0x0010 +#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_EN 0x0080 #define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN 0x0100 #define MII_BCM54XX_AUXCTL_MISC_FORCE_AMDIX 0x0200 #define MII_BCM54XX_AUXCTL_MISC_WREN 0x8000 @@ -161,6 +163,7 @@ #define BCM_LED_SRC_OPENSHORT 0xb #define BCM_LED_SRC_OFF 0xe /* Tied high */ #define BCM_LED_SRC_ON 0xf /* Tied low */ +#define BCM_LED_SRC_MASK GENMASK(3, 0) /* * Broadcom Multicolor LED configurations (expansion register 4) @@ -197,6 +200,7 @@ #define BCM54XX_SHD_SCR3_DEF_CLK125 0x0001 #define BCM54XX_SHD_SCR3_DLLAPD_DIS 0x0002 #define BCM54XX_SHD_SCR3_TRDDAPD 0x0004 +#define BCM54XX_SHD_SCR3_RXCTXC_DIS 0x0100 /* 01010: Auto Power-Down */ #define BCM54XX_SHD_APD 0x0a @@ -205,11 +209,13 @@ #define BCM_NO_ANEG_APD_EN 0x0060 /* bits 5 & 6 */ #define BCM_APD_SINGLELP_EN 0x0100 /* Bit 8 */ -#define BCM5482_SHD_LEDS1 0x0d /* 01101: LED Selector 1 */ +#define BCM54XX_SHD_LEDS1 0x0d /* 01101: LED Selector 1 */ /* LED3 / ~LINKSPD[2] selector */ -#define BCM5482_SHD_LEDS1_LED3(src) ((src & 0xf) << 4) +#define BCM54XX_SHD_LEDS_SHIFT(led) (4 * (led)) +#define BCM54XX_SHD_LEDS1_LED3(src) ((src & 0xf) << 4) /* LED1 / ~LINKSPD[1] selector */ -#define BCM5482_SHD_LEDS1_LED1(src) ((src & 0xf) << 0) +#define BCM54XX_SHD_LEDS1_LED1(src) ((src & 0xf) << 0) +#define BCM54XX_SHD_LEDS2 0x0e /* 01110: LED Selector 2 */ #define BCM54XX_SHD_RGMII_MODE 0x0b /* 01011: RGMII Mode Selector */ #define BCM5482_SHD_SSD 0x14 /* 10100: Secondary SerDes control */ #define BCM5482_SHD_SSD_LEDM 0x0008 /* SSD LED Mode enable */ @@ -222,6 +228,9 @@ /* 11111: Mode Control Register */ #define BCM54XX_SHD_MODE 0x1f #define BCM54XX_SHD_INTF_SEL_MASK GENMASK(2, 1) /* INTERF_SEL[1:0] */ +#define BCM54XX_SHD_INTF_SEL_RGMII 0x02 +#define BCM54XX_SHD_INTF_SEL_SGMII 0x04 +#define BCM54XX_SHD_INTF_SEL_GBIC 0x06 #define BCM54XX_SHD_MODE_1000BX BIT(0) /* Enable 1000-X registers */ /* @@ -235,6 +244,7 @@ #define MII_BCM54XX_EXP_EXP08 0x0F08 #define MII_BCM54XX_EXP_EXP08_RJCT_2MHZ 0x0001 #define MII_BCM54XX_EXP_EXP08_EARLY_DAC_WAKE 0x0200 +#define MII_BCM54XX_EXP_EXP08_FORCE_DAC_WAKE 0x0100 #define MII_BCM54XX_EXP_EXP75 0x0f75 #define MII_BCM54XX_EXP_EXP75_VDACCTRL 0x003c #define MII_BCM54XX_EXP_EXP75_CM_OSC 0x0001 @@ -243,6 +253,15 @@ #define MII_BCM54XX_EXP_EXP97 0x0f97 #define MII_BCM54XX_EXP_EXP97_MYST 0x0c0c +/* Top-MISC expansion registers */ +#define BCM54XX_TOP_MISC_IDDQ_CTRL (MII_BCM54XX_EXP_SEL_TOP + 0x06) +#define BCM54XX_TOP_MISC_IDDQ_LP (1 << 0) +#define BCM54XX_TOP_MISC_IDDQ_SD (1 << 2) +#define BCM54XX_TOP_MISC_IDDQ_SR (1 << 3) + +#define BCM54XX_TOP_MISC_LED_CTL (MII_BCM54XX_EXP_SEL_TOP + 0x0C) +#define BCM54XX_LED4_SEL_INTR BIT(1) + /* * BCM5482: Secondary SerDes registers */ @@ -252,17 +271,164 @@ #define BCM5482_SSD_SGMII_SLAVE_EN 0x0002 /* Slave mode enable */ #define BCM5482_SSD_SGMII_SLAVE_AD 0x0001 /* Slave auto-detection */ +/* BroadR-Reach LRE Registers. */ +#define MII_BCM54XX_LRECR 0x00 /* LRE Control Register */ +#define MII_BCM54XX_LRESR 0x01 /* LRE Status Register */ +#define MII_BCM54XX_LREPHYSID1 0x02 /* LRE PHYS ID 1 */ +#define MII_BCM54XX_LREPHYSID2 0x03 /* LRE PHYS ID 2 */ +#define MII_BCM54XX_LREANAA 0x04 /* LDS Auto-Negotiation Advertised Ability */ +#define MII_BCM54XX_LREANAC 0x05 /* LDS Auto-Negotiation Advertised Control */ +#define MII_BCM54XX_LREANPT 0x06 /* LDS Ability Next Page Transmit */ +#define MII_BCM54XX_LRELPA 0x07 /* LDS Link Partner Ability */ +#define MII_BCM54XX_LRELPNPM 0x08 /* LDS Link Partner Next Page Message */ +#define MII_BCM54XX_LRELPNPC 0x09 /* LDS Link Partner Next Page Control */ +#define MII_BCM54XX_LRELDSE 0x0a /* LDS Expansion Register */ +#define MII_BCM54XX_LREES 0x0f /* LRE Extended Status */ + +/* LRE control register. */ +#define LRECR_RESET 0x8000 /* Reset to default state */ +#define LRECR_LOOPBACK 0x4000 /* Internal Loopback */ +#define LRECR_LDSRES 0x2000 /* Restart LDS Process */ +#define LRECR_LDSEN 0x1000 /* LDS Enable */ +#define LRECR_PDOWN 0x0800 /* Enable low power state */ +#define LRECR_ISOLATE 0x0400 /* Isolate data paths from MII */ +#define LRECR_SPEED100 0x0200 /* Select 100 Mbps */ +#define LRECR_SPEED10 0x0000 /* Select 10 Mbps */ +#define LRECR_4PAIRS 0x0020 /* Select 4 Pairs */ +#define LRECR_2PAIRS 0x0010 /* Select 2 Pairs */ +#define LRECR_1PAIR 0x0000 /* Select 1 Pair */ +#define LRECR_MASTER 0x0008 /* Force Master when LDS disabled */ +#define LRECR_SLAVE 0x0000 /* Force Slave when LDS disabled */ + +/* LRE status register. */ +#define LRESR_100_1PAIR 0x2000 /* Can do 100Mbps 1 Pair */ +#define LRESR_100_4PAIR 0x1000 /* Can do 100Mbps 4 Pairs */ +#define LRESR_100_2PAIR 0x0800 /* Can do 100Mbps 2 Pairs */ +#define LRESR_10_2PAIR 0x0400 /* Can do 10Mbps 2 Pairs */ +#define LRESR_10_1PAIR 0x0200 /* Can do 10Mbps 1 Pair */ +#define LRESR_ESTATEN 0x0100 /* Extended Status in R15 */ +#define LRESR_RESV 0x0080 /* Unused... */ +#define LRESR_MFPS 0x0040 /* Can suppress Management Frames Preamble */ +#define LRESR_LDSCOMPLETE 0x0020 /* LDS Auto-negotiation complete */ +#define LRESR_8023 0x0010 /* Has IEEE 802.3 Support */ +#define LRESR_LDSABILITY 0x0008 /* LDS auto-negotiation capable */ +#define LRESR_LSTATUS 0x0004 /* Link status */ +#define LRESR_JCD 0x0002 /* Jabber detected */ +#define LRESR_ERCAP 0x0001 /* Ext-reg capability */ + +/* LDS Auto-Negotiation Advertised Ability. */ +#define LREANAA_PAUSE_ASYM 0x8000 /* Can pause asymmetrically */ +#define LREANAA_PAUSE 0x4000 /* Can pause */ +#define LREANAA_100_1PAIR 0x0020 /* Can do 100Mbps 1 Pair */ +#define LREANAA_100_4PAIR 0x0010 /* Can do 100Mbps 4 Pair */ +#define LREANAA_100_2PAIR 0x0008 /* Can do 100Mbps 2 Pair */ +#define LREANAA_10_2PAIR 0x0004 /* Can do 10Mbps 2 Pair */ +#define LREANAA_10_1PAIR 0x0002 /* Can do 10Mbps 1 Pair */ + +#define LRE_ADVERTISE_FULL (LREANAA_100_1PAIR | LREANAA_100_4PAIR | \ + LREANAA_100_2PAIR | LREANAA_10_2PAIR | \ + LREANAA_10_1PAIR) + +#define LRE_ADVERTISE_ALL LRE_ADVERTISE_FULL + +/* LDS Link Partner Ability. */ +#define LRELPA_PAUSE_ASYM 0x8000 /* Supports asymmetric pause */ +#define LRELPA_PAUSE 0x4000 /* Supports pause capability */ +#define LRELPA_100_1PAIR 0x0020 /* 100Mbps 1 Pair capable */ +#define LRELPA_100_4PAIR 0x0010 /* 100Mbps 4 Pair capable */ +#define LRELPA_100_2PAIR 0x0008 /* 100Mbps 2 Pair capable */ +#define LRELPA_10_2PAIR 0x0004 /* 10Mbps 2 Pair capable */ +#define LRELPA_10_1PAIR 0x0002 /* 10Mbps 1 Pair capable */ + +/* LDS Expansion register. */ +#define LDSE_DOWNGRADE 0x8000 /* Can do LDS Speed Downgrade */ +#define LDSE_MASTER 0x4000 /* Master / Slave */ +#define LDSE_PAIRS_MASK 0x3000 /* Pair Count Mask */ +#define LDSE_PAIRS_SHIFT 12 +#define LDSE_4PAIRS (2 << LDSE_PAIRS_SHIFT) /* 4 Pairs Connection */ +#define LDSE_2PAIRS (1 << LDSE_PAIRS_SHIFT) /* 2 Pairs Connection */ +#define LDSE_1PAIR (0 << LDSE_PAIRS_SHIFT) /* 1 Pair Connection */ +#define LDSE_CABLEN_MASK 0x0FFF /* Cable Length Mask */ + /* BCM54810 Registers */ #define BCM54810_EXP_BROADREACH_LRE_MISC_CTL (MII_BCM54XX_EXP_SEL_ER + 0x90) #define BCM54810_EXP_BROADREACH_LRE_MISC_CTL_EN (1 << 0) #define BCM54810_SHD_CLK_CTL 0x3 #define BCM54810_SHD_CLK_CTL_GTXCLK_EN (1 << 9) -#define BCM54810_SHD_SCR3_TRDDAPD 0x0100 + +/* BCM54811 Registers */ +#define BCM54811_EXP_BROADREACH_LRE_OVERLAY_CTL (MII_BCM54XX_EXP_SEL_ER + 0x9A) +/* Access Control Override Enable */ +#define BCM54811_EXP_BROADREACH_LRE_OVERLAY_CTL_EN BIT(15) +/* Access Control Override Value */ +#define BCM54811_EXP_BROADREACH_LRE_OVERLAY_CTL_OVERRIDE_VAL BIT(14) +/* Access Control Value */ +#define BCM54811_EXP_BROADREACH_LRE_OVERLAY_CTL_VAL BIT(13) /* BCM54612E Registers */ #define BCM54612E_EXP_SPARE0 (MII_BCM54XX_EXP_SEL_ETC + 0x34) #define BCM54612E_LED4_CLK125OUT_EN (1 << 1) + +/* Wake-on-LAN registers */ +#define BCM54XX_WOL_MAIN_CTL (MII_BCM54XX_EXP_SEL_WOL + 0x80) +#define BCM54XX_WOL_EN BIT(0) +#define BCM54XX_WOL_MODE_SINGLE_MPD 0 +#define BCM54XX_WOL_MODE_SINGLE_MPDSEC 1 +#define BCM54XX_WOL_MODE_DUAL 2 +#define BCM54XX_WOL_MODE_SHIFT 1 +#define BCM54XX_WOL_MODE_MASK 0x3 +#define BCM54XX_WOL_MP_MSB_FF_EN BIT(3) +#define BCM54XX_WOL_SECKEY_OPT_4B 0 +#define BCM54XX_WOL_SECKEY_OPT_6B 1 +#define BCM54XX_WOL_SECKEY_OPT_8B 2 +#define BCM54XX_WOL_SECKEY_OPT_SHIFT 4 +#define BCM54XX_WOL_SECKEY_OPT_MASK 0x3 +#define BCM54XX_WOL_L2_TYPE_CHK BIT(6) +#define BCM54XX_WOL_L4IPV4UDP_CHK BIT(7) +#define BCM54XX_WOL_L4IPV6UDP_CHK BIT(8) +#define BCM54XX_WOL_UDPPORT_CHK BIT(9) +#define BCM54XX_WOL_CRC_CHK BIT(10) +#define BCM54XX_WOL_SECKEY_MODE BIT(11) +#define BCM54XX_WOL_RST BIT(12) +#define BCM54XX_WOL_DIR_PKT_EN BIT(13) +#define BCM54XX_WOL_MASK_MODE_DA_FF 0 +#define BCM54XX_WOL_MASK_MODE_DA_MPD 1 +#define BCM54XX_WOL_MASK_MODE_DA_ONLY 2 +#define BCM54XX_WOL_MASK_MODE_MPD 3 +#define BCM54XX_WOL_MASK_MODE_SHIFT 14 +#define BCM54XX_WOL_MASK_MODE_MASK 0x3 + +#define BCM54XX_WOL_INNER_PROTO (MII_BCM54XX_EXP_SEL_WOL + 0x81) +#define BCM54XX_WOL_OUTER_PROTO (MII_BCM54XX_EXP_SEL_WOL + 0x82) +#define BCM54XX_WOL_OUTER_PROTO2 (MII_BCM54XX_EXP_SEL_WOL + 0x83) + +#define BCM54XX_WOL_MPD_DATA1(x) (MII_BCM54XX_EXP_SEL_WOL + 0x84 + (x)) +#define BCM54XX_WOL_MPD_DATA2(x) (MII_BCM54XX_EXP_SEL_WOL + 0x87 + (x)) +#define BCM54XX_WOL_SEC_KEY_8B (MII_BCM54XX_EXP_SEL_WOL + 0x8A) +#define BCM54XX_WOL_MASK(x) (MII_BCM54XX_EXP_SEL_WOL + 0x8B + (x)) +#define BCM54XX_SEC_KEY_STORE(x) (MII_BCM54XX_EXP_SEL_WOL + 0x8E) +#define BCM54XX_WOL_SHARED_CNT (MII_BCM54XX_EXP_SEL_WOL + 0x92) + +#define BCM54XX_WOL_INT_MASK (MII_BCM54XX_EXP_SEL_WOL + 0x93) +#define BCM54XX_WOL_PKT1 BIT(0) +#define BCM54XX_WOL_PKT2 BIT(1) +#define BCM54XX_WOL_DIR BIT(2) +#define BCM54XX_WOL_ALL_INTRS (BCM54XX_WOL_PKT1 | \ + BCM54XX_WOL_PKT2 | \ + BCM54XX_WOL_DIR) + +#define BCM54XX_WOL_INT_STATUS (MII_BCM54XX_EXP_SEL_WOL + 0x94) + +/* BCM5221 Registers */ +#define BCM5221_AEGSR 0x1C +#define BCM5221_AEGSR_MDIX_STATUS BIT(13) +#define BCM5221_AEGSR_MDIX_MAN_SWAP BIT(12) +#define BCM5221_AEGSR_MDIX_DIS BIT(11) + +#define BCM5221_SHDW_AM4_EN_CLK_LPM BIT(2) +#define BCM5221_SHDW_AM4_FORCE_LPM BIT(1) + /*****************************************************************************/ /* Fast Ethernet Transceiver definitions. */ /*****************************************************************************/ @@ -284,6 +450,7 @@ #define MII_BRCM_FET_SHDW_MC_FAME 0x4000 /* Force Auto MDIX enable */ #define MII_BRCM_FET_SHDW_AUXMODE4 0x1a /* Auxiliary mode 4 */ +#define MII_BRCM_FET_SHDW_AM4_STANDBY 0x0008 /* Standby enable */ #define MII_BRCM_FET_SHDW_AM4_LED_MASK 0x0003 #define MII_BRCM_FET_SHDW_AM4_LED_MODE1 0x0001 @@ -294,6 +461,8 @@ #define LPI_FEATURE_EN 0x8000 #define LPI_FEATURE_EN_DIG1000X 0x4000 +#define BRCM_CL45VEN_EEE_LPI_CNT 0x803f + /* Core register definitions*/ #define MII_BRCM_CORE_BASE12 0x12 #define MII_BRCM_CORE_BASE13 0x13 |