diff options
Diffstat (limited to 'include/linux/phy.h')
| -rw-r--r-- | include/linux/phy.h | 948 |
1 files changed, 647 insertions, 301 deletions
diff --git a/include/linux/phy.h b/include/linux/phy.h index eb3cb1a98b45..e194dad1623d 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -14,6 +14,7 @@ #include <linux/compiler.h> #include <linux/spinlock.h> #include <linux/ethtool.h> +#include <linux/leds.h> #include <linux/linkmode.h> #include <linux/netlink.h> #include <linux/mdio.h> @@ -29,57 +30,40 @@ #include <linux/refcount.h> #include <linux/atomic.h> - -#define PHY_DEFAULT_FEATURES (SUPPORTED_Autoneg | \ - SUPPORTED_TP | \ - SUPPORTED_MII) - -#define PHY_10BT_FEATURES (SUPPORTED_10baseT_Half | \ - SUPPORTED_10baseT_Full) - -#define PHY_100BT_FEATURES (SUPPORTED_100baseT_Half | \ - SUPPORTED_100baseT_Full) - -#define PHY_1000BT_FEATURES (SUPPORTED_1000baseT_Half | \ - SUPPORTED_1000baseT_Full) +#include <net/eee.h> extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_basic_features) __ro_after_init; extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_basic_t1_features) __ro_after_init; +extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_basic_t1s_p2mp_features) __ro_after_init; extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_gbit_features) __ro_after_init; extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_gbit_fibre_features) __ro_after_init; -extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_gbit_all_ports_features) __ro_after_init; extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_10gbit_features) __ro_after_init; -extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_10gbit_fec_features) __ro_after_init; -extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_10gbit_full_features) __ro_after_init; +extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_eee_cap1_features) __ro_after_init; +extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_eee_cap2_features) __ro_after_init; #define PHY_BASIC_FEATURES ((unsigned long *)&phy_basic_features) #define PHY_BASIC_T1_FEATURES ((unsigned long *)&phy_basic_t1_features) +#define PHY_BASIC_T1S_P2MP_FEATURES ((unsigned long *)&phy_basic_t1s_p2mp_features) #define PHY_GBIT_FEATURES ((unsigned long *)&phy_gbit_features) #define PHY_GBIT_FIBRE_FEATURES ((unsigned long *)&phy_gbit_fibre_features) -#define PHY_GBIT_ALL_PORTS_FEATURES ((unsigned long *)&phy_gbit_all_ports_features) #define PHY_10GBIT_FEATURES ((unsigned long *)&phy_10gbit_features) -#define PHY_10GBIT_FEC_FEATURES ((unsigned long *)&phy_10gbit_fec_features) -#define PHY_10GBIT_FULL_FEATURES ((unsigned long *)&phy_10gbit_full_features) +#define PHY_EEE_CAP1_FEATURES ((unsigned long *)&phy_eee_cap1_features) +#define PHY_EEE_CAP2_FEATURES ((unsigned long *)&phy_eee_cap2_features) extern const int phy_basic_ports_array[3]; -extern const int phy_fibre_port_array[1]; -extern const int phy_all_ports_features_array[7]; -extern const int phy_10_100_features_array[4]; -extern const int phy_basic_t1_features_array[2]; -extern const int phy_gbit_features_array[2]; -extern const int phy_10gbit_features_array[1]; /* * Set phydev->irq to PHY_POLL if interrupts are not supported, - * or not desired for this PHY. Set to PHY_IGNORE_INTERRUPT if - * the attached driver handles the interrupt + * or not desired for this PHY. Set to PHY_MAC_INTERRUPT if + * the attached MAC driver handles the interrupt */ #define PHY_POLL -1 -#define PHY_IGNORE_INTERRUPT -2 +#define PHY_MAC_INTERRUPT -2 #define PHY_IS_INTERNAL 0x00000001 #define PHY_RST_AFTER_CLK_EN 0x00000002 #define PHY_POLL_CABLE_TEST 0x00000004 +#define PHY_ALWAYS_CALL_SUSPEND 0x00000008 #define MDIO_DEVICE_IS_PHY 0x80000000 /** @@ -87,30 +71,38 @@ extern const int phy_10gbit_features_array[1]; * * @PHY_INTERFACE_MODE_NA: Not Applicable - don't touch * @PHY_INTERFACE_MODE_INTERNAL: No interface, MAC and PHY combined - * @PHY_INTERFACE_MODE_MII: Median-independent interface - * @PHY_INTERFACE_MODE_GMII: Gigabit median-independent interface + * @PHY_INTERFACE_MODE_MII: Media-independent interface + * @PHY_INTERFACE_MODE_GMII: Gigabit media-independent interface * @PHY_INTERFACE_MODE_SGMII: Serial gigabit media-independent interface * @PHY_INTERFACE_MODE_TBI: Ten Bit Interface * @PHY_INTERFACE_MODE_REVMII: Reverse Media Independent Interface * @PHY_INTERFACE_MODE_RMII: Reduced Media Independent Interface + * @PHY_INTERFACE_MODE_REVRMII: Reduced Media Independent Interface in PHY role * @PHY_INTERFACE_MODE_RGMII: Reduced gigabit media-independent interface * @PHY_INTERFACE_MODE_RGMII_ID: RGMII with Internal RX+TX delay * @PHY_INTERFACE_MODE_RGMII_RXID: RGMII with Internal RX delay - * @PHY_INTERFACE_MODE_RGMII_TXID: RGMII with Internal RX delay + * @PHY_INTERFACE_MODE_RGMII_TXID: RGMII with Internal TX delay * @PHY_INTERFACE_MODE_RTBI: Reduced TBI - * @PHY_INTERFACE_MODE_SMII: ??? MII + * @PHY_INTERFACE_MODE_SMII: Serial MII * @PHY_INTERFACE_MODE_XGMII: 10 gigabit media-independent interface * @PHY_INTERFACE_MODE_XLGMII:40 gigabit media-independent interface * @PHY_INTERFACE_MODE_MOCA: Multimedia over Coax + * @PHY_INTERFACE_MODE_PSGMII: Penta SGMII * @PHY_INTERFACE_MODE_QSGMII: Quad SGMII * @PHY_INTERFACE_MODE_TRGMII: Turbo RGMII + * @PHY_INTERFACE_MODE_100BASEX: 100 BaseX * @PHY_INTERFACE_MODE_1000BASEX: 1000 BaseX * @PHY_INTERFACE_MODE_2500BASEX: 2500 BaseX + * @PHY_INTERFACE_MODE_5GBASER: 5G BaseR * @PHY_INTERFACE_MODE_RXAUI: Reduced XAUI * @PHY_INTERFACE_MODE_XAUI: 10 Gigabit Attachment Unit Interface * @PHY_INTERFACE_MODE_10GBASER: 10G BaseR + * @PHY_INTERFACE_MODE_25GBASER: 25G BaseR * @PHY_INTERFACE_MODE_USXGMII: Universal Serial 10GE MII * @PHY_INTERFACE_MODE_10GKR: 10GBASE-KR - with Clause 73 AN + * @PHY_INTERFACE_MODE_QUSGMII: Quad Universal SGMII + * @PHY_INTERFACE_MODE_1000BASEKX: 1000Base-KX - with Clause 73 AN + * @PHY_INTERFACE_MODE_10G_QXGMII: 10G-QXGMII - 4 ports over 10G USXGMII * @PHY_INTERFACE_MODE_MAX: Book keeping * * Describes the interface between the MAC and PHY. @@ -124,6 +116,7 @@ typedef enum { PHY_INTERFACE_MODE_TBI, PHY_INTERFACE_MODE_REVMII, PHY_INTERFACE_MODE_RMII, + PHY_INTERFACE_MODE_REVRMII, PHY_INTERFACE_MODE_RGMII, PHY_INTERFACE_MODE_RGMII_ID, PHY_INTERFACE_MODE_RGMII_RXID, @@ -133,34 +126,60 @@ typedef enum { PHY_INTERFACE_MODE_XGMII, PHY_INTERFACE_MODE_XLGMII, PHY_INTERFACE_MODE_MOCA, + PHY_INTERFACE_MODE_PSGMII, PHY_INTERFACE_MODE_QSGMII, PHY_INTERFACE_MODE_TRGMII, + PHY_INTERFACE_MODE_100BASEX, PHY_INTERFACE_MODE_1000BASEX, PHY_INTERFACE_MODE_2500BASEX, + PHY_INTERFACE_MODE_5GBASER, PHY_INTERFACE_MODE_RXAUI, PHY_INTERFACE_MODE_XAUI, /* 10GBASE-R, XFI, SFI - single lane 10G Serdes */ PHY_INTERFACE_MODE_10GBASER, + PHY_INTERFACE_MODE_25GBASER, PHY_INTERFACE_MODE_USXGMII, /* 10GBASE-KR - with Clause 73 AN */ PHY_INTERFACE_MODE_10GKR, + PHY_INTERFACE_MODE_QUSGMII, + PHY_INTERFACE_MODE_1000BASEKX, + PHY_INTERFACE_MODE_10G_QXGMII, PHY_INTERFACE_MODE_MAX, } phy_interface_t; -/** - * phy_supported_speeds - return all speeds currently supported by a PHY device - * @phy: The PHY device to return supported speeds of. - * @speeds: buffer to store supported speeds in. - * @size: size of speeds buffer. - * - * Description: Returns the number of supported speeds, and fills - * the speeds buffer with the supported speeds. If speeds buffer is - * too small to contain all currently supported speeds, will return as - * many speeds as can fit. - */ -unsigned int phy_supported_speeds(struct phy_device *phy, - unsigned int *speeds, - unsigned int size); +/* PHY interface mode bitmap handling */ +#define DECLARE_PHY_INTERFACE_MASK(name) \ + DECLARE_BITMAP(name, PHY_INTERFACE_MODE_MAX) + +static inline void phy_interface_zero(unsigned long *intf) +{ + bitmap_zero(intf, PHY_INTERFACE_MODE_MAX); +} + +static inline bool phy_interface_empty(const unsigned long *intf) +{ + return bitmap_empty(intf, PHY_INTERFACE_MODE_MAX); +} + +static inline void phy_interface_and(unsigned long *dst, const unsigned long *a, + const unsigned long *b) +{ + bitmap_and(dst, a, b, PHY_INTERFACE_MODE_MAX); +} + +static inline void phy_interface_or(unsigned long *dst, const unsigned long *a, + const unsigned long *b) +{ + bitmap_or(dst, a, b, PHY_INTERFACE_MODE_MAX); +} + +static inline void phy_interface_set_rgmii(unsigned long *intf) +{ + __set_bit(PHY_INTERFACE_MODE_RGMII, intf); + __set_bit(PHY_INTERFACE_MODE_RGMII_ID, intf); + __set_bit(PHY_INTERFACE_MODE_RGMII_RXID, intf); + __set_bit(PHY_INTERFACE_MODE_RGMII_TXID, intf); +} /** * phy_modes - map phy_interface_t enum to device tree binding of phy-mode @@ -189,6 +208,8 @@ static inline const char *phy_modes(phy_interface_t interface) return "rev-mii"; case PHY_INTERFACE_MODE_RMII: return "rmii"; + case PHY_INTERFACE_MODE_REVRMII: + return "rev-rmii"; case PHY_INTERFACE_MODE_RGMII: return "rgmii"; case PHY_INTERFACE_MODE_RGMII_ID: @@ -207,41 +228,76 @@ static inline const char *phy_modes(phy_interface_t interface) return "xlgmii"; case PHY_INTERFACE_MODE_MOCA: return "moca"; + case PHY_INTERFACE_MODE_PSGMII: + return "psgmii"; case PHY_INTERFACE_MODE_QSGMII: return "qsgmii"; case PHY_INTERFACE_MODE_TRGMII: return "trgmii"; case PHY_INTERFACE_MODE_1000BASEX: return "1000base-x"; + case PHY_INTERFACE_MODE_1000BASEKX: + return "1000base-kx"; case PHY_INTERFACE_MODE_2500BASEX: return "2500base-x"; + case PHY_INTERFACE_MODE_5GBASER: + return "5gbase-r"; case PHY_INTERFACE_MODE_RXAUI: return "rxaui"; case PHY_INTERFACE_MODE_XAUI: return "xaui"; case PHY_INTERFACE_MODE_10GBASER: return "10gbase-r"; + case PHY_INTERFACE_MODE_25GBASER: + return "25gbase-r"; case PHY_INTERFACE_MODE_USXGMII: return "usxgmii"; case PHY_INTERFACE_MODE_10GKR: return "10gbase-kr"; + case PHY_INTERFACE_MODE_100BASEX: + return "100base-x"; + case PHY_INTERFACE_MODE_QUSGMII: + return "qusgmii"; + case PHY_INTERFACE_MODE_10G_QXGMII: + return "10g-qxgmii"; default: return "unknown"; } } - -#define PHY_INIT_TIMEOUT 100000 -#define PHY_FORCE_TIMEOUT 10 +/** + * rgmii_clock - map link speed to the clock rate + * @speed: link speed value + * + * Description: maps RGMII supported link speeds + * into the clock rates. + * + * Returns: clock rate or negative errno + */ +static inline long rgmii_clock(int speed) +{ + switch (speed) { + case SPEED_10: + return 2500000; + case SPEED_100: + return 25000000; + case SPEED_1000: + return 125000000; + default: + return -EINVAL; + } +} #define PHY_MAX_ADDR 32 /* Used when trying to connect to a specific phy (mii bus id:phy device id) */ #define PHY_ID_FMT "%s:%02x" +#define PHY_ID_SIZE (MII_BUS_ID_SIZE + 3) #define MII_BUS_ID_SIZE 61 struct device; +struct kernel_hwtstamp_config; struct phylink; struct sfp_bus; struct sfp_upstream_ops; @@ -265,37 +321,6 @@ struct mdio_bus_stats { }; /** - * struct phy_package_shared - Shared information in PHY packages - * @addr: Common PHY address used to combine PHYs in one package - * @refcnt: Number of PHYs connected to this shared data - * @flags: Initialization of PHY package - * @priv_size: Size of the shared private data @priv - * @priv: Driver private data shared across a PHY package - * - * Represents a shared structure between different phydev's in the same - * package, for example a quad PHY. See phy_package_join() and - * phy_package_leave(). - */ -struct phy_package_shared { - int addr; - refcount_t refcnt; - unsigned long flags; - size_t priv_size; - - /* private data pointer */ - /* note that this pointer is shared between different phydevs and - * the user has to take care of appropriate locking. It is allocated - * and freed automatically by phy_package_join() and - * phy_package_leave(). - */ - void *priv; -}; - -/* used as bit number in atomic bitops */ -#define PHY_SHARED_F_INIT_DONE 0 -#define PHY_SHARED_F_PROBE_DONE 1 - -/** * struct mii_bus - Represents an MDIO bus * * @owner: Who owns this device @@ -315,6 +340,11 @@ struct mii_bus { int (*read)(struct mii_bus *bus, int addr, int regnum); /** @write: Perform a write transfer on the bus */ int (*write)(struct mii_bus *bus, int addr, int regnum, u16 val); + /** @read_c45: Perform a C45 read transfer on the bus */ + int (*read_c45)(struct mii_bus *bus, int addr, int devnum, int regnum); + /** @write_c45: Perform a C45 write transfer on the bus */ + int (*write_c45)(struct mii_bus *bus, int addr, int devnum, + int regnum, u16 val); /** @reset: Perform a reset of the bus */ int (*reset)(struct mii_bus *bus); @@ -362,14 +392,6 @@ struct mii_bus { /** @reset_gpiod: Reset GPIO descriptor pointer */ struct gpio_desc *reset_gpiod; - /** @probe_capabilities: bus capabilities, used for probing */ - enum { - MDIOBUS_NO_CAP = 0, - MDIOBUS_C22, - MDIOBUS_C45, - MDIOBUS_C22_C45, - } probe_capabilities; - /** @shared_lock: protect access to the shared element */ struct mutex shared_lock; @@ -407,7 +429,7 @@ static inline struct mii_bus *devm_mdiobus_alloc(struct device *dev) } struct mii_bus *mdio_find_bus(const char *mdio_name); -struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr); +struct phy_device *mdiobus_scan_c22(struct mii_bus *bus, int addr); #define PHY_INTERRUPT_DISABLED false #define PHY_INTERRUPT_ENABLED true @@ -444,14 +466,17 @@ struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr); * Once complete, move to UP to restart the PHY. * - phy_stop aborts the running test and moves to @PHY_HALTED * - * @PHY_HALTED: PHY is up, but no polling or interrupts are done. Or - * PHY is in an error state. + * @PHY_HALTED: PHY is up, but no polling or interrupts are done. * - phy_start moves to @PHY_UP + * + * @PHY_ERROR: PHY is up, but is in an error state. + * - phy_stop moves to @PHY_HALTED */ enum phy_state { PHY_DOWN = 0, PHY_READY, PHY_HALTED, + PHY_ERROR, PHY_UP, PHY_RUNNING, PHY_NOLINK, @@ -480,6 +505,11 @@ struct macsec_ops; * * @mdio: MDIO bus this PHY is on * @drv: Pointer to the driver for this PHY instance + * @devlink: Create a link between phy dev and mac dev, if the external phy + * used by current mac interface is managed by another mac interface. + * @phyindex: Unique id across the phy's parent tree of phys to address the PHY + * from userspace, similar to ifindex. A zero index means the PHY + * wasn't assigned an id yet. * @phy_id: UID for this device found during discovery * @c45_ids: 802.3-c45 Device Identifiers if is_c45. * @is_c45: Set to true if this PHY uses clause 45 addressing. @@ -492,10 +522,19 @@ struct macsec_ops; * @sysfs_links: Internal boolean tracking sysfs symbolic links setup/removal. * @loopback_enabled: Set true if this PHY has been loopbacked successfully. * @downshifted_rate: Set true if link speed has been downshifted. + * @is_on_sfp_module: Set true if PHY is located on an SFP module. + * @mac_managed_pm: Set true if MAC driver takes of suspending/resuming PHY + * @wol_enabled: Set to true if the PHY or the attached MAC have Wake-on-LAN + * enabled. * @state: State of the PHY for management purposes * @dev_flags: Device-specific flags used by the PHY driver. + * + * - Bits [15:0] are free to use by the PHY driver to communicate + * driver specific behavior. + * - Bits [23:16] are currently reserved for future use. + * - Bits [31:24] are reserved for defining generic + * PHY driver behavior. * @irq: IRQ number of the PHY's interrupt (-1 if none) - * @phy_timer: The timer for handling the state machine * @phylink: Pointer to phylink instance for this PHY * @sfp_bus_attached: Flag indicating whether the SFP bus has been attached * @sfp_bus: SFP bus attached to this PHY's fiber port @@ -507,20 +546,37 @@ struct macsec_ops; * * @speed: Current link speed * @duplex: Current duplex + * @port: Current port * @pause: Current pause * @asym_pause: Current asymmetric pause * @supported: Combined MAC/PHY supported linkmodes * @advertising: Currently advertised linkmodes * @adv_old: Saved advertised while power saving for WoL + * @supported_eee: supported PHY EEE linkmodes + * @advertising_eee: Currently advertised EEE linkmodes + * @enable_tx_lpi: When True, MAC should transmit LPI to PHY + * @eee_active: phylib private state, indicating that EEE has been negotiated + * @eee_cfg: User configuration of EEE * @lp_advertising: Current link partner advertised linkmodes - * @eee_broken_modes: Energy efficient ethernet modes which should be prohibited + * @host_interfaces: PHY interface modes supported by host + * @eee_disabled_modes: Energy efficient ethernet modes not to be advertised * @autoneg: Flag autoneg being used + * @rate_matching: Current rate matching mode * @link: Current link state * @autoneg_complete: Flag auto negotiation of the link has completed * @mdix: Current crossover * @mdix_ctrl: User setting of crossover + * @pma_extable: Cached value of PMA/PMD Extended Abilities Register * @interrupts: Flag interrupts have been enabled + * @irq_suspended: Flag indicating PHY is suspended and therefore interrupt + * handling shall be postponed until PHY has resumed + * @irq_rerun: Flag indicating interrupts occurred while PHY was suspended, + * requiring a rerun of the interrupt handler after resume + * @default_timestamp: Flag indicating whether we are using the phy + * timestamp as the default one * @interface: enum phy_interface_t value + * @possible_interfaces: bitmap if interface modes that the attached PHY + * will switch between depending on media speed. * @skb: Netlink message for cable diagnostics * @nest: Netlink nest used for cable diagnostics * @ehdr: nNtlink header for cable diagnostics @@ -528,12 +584,15 @@ struct macsec_ops; * @phy_num_led_triggers: Number of triggers in @phy_led_triggers * @led_link_trigger: LED trigger for link up/down * @last_triggered: last LED trigger for link speed + * @leds: list of PHY LED structures * @master_slave_set: User requested master/slave configuration * @master_slave_get: Current master/slave advertisement * @master_slave_state: Current master/slave configuration * @mii_ts: Pointer to time stamper callbacks + * @psec: Pointer to Power Sourcing Equipment control struct * @lock: Mutex for serialization access to PHY * @state_queue: Work queue for state machine + * @link_down_events: Number of times link was lost * @shared: Pointer to private data shared by phys in one package * @priv: Pointer to driver private data * @@ -549,8 +608,11 @@ struct phy_device { /* Information about the PHY type */ /* And management functions */ - struct phy_driver *drv; + const struct phy_driver *drv; + struct device_link *devlink; + + u32 phyindex; u32 phy_id; struct phy_c45_device_ids c45_ids; @@ -564,6 +626,9 @@ struct phy_device { unsigned sysfs_links:1; unsigned loopback_enabled:1; unsigned downshifted_rate:1; + unsigned is_on_sfp_module:1; + unsigned mac_managed_pm:1; + unsigned wol_enabled:1; unsigned autoneg:1; /* The most recently read link state */ @@ -572,12 +637,19 @@ struct phy_device { /* Interrupts are enabled */ unsigned interrupts:1; + unsigned irq_suspended:1; + unsigned irq_rerun:1; + + unsigned default_timestamp:1; + + int rate_matching; enum phy_state state; u32 dev_flags; phy_interface_t interface; + DECLARE_PHY_INTERFACE_MASK(possible_interfaces); /* * forced speed & duplex (no autoneg) @@ -585,6 +657,7 @@ struct phy_device { */ int speed; int duplex; + int port; int pause; int asym_pause; u8 master_slave_get; @@ -598,9 +671,17 @@ struct phy_device { __ETHTOOL_DECLARE_LINK_MODE_MASK(lp_advertising); /* used with phy_speed_down */ __ETHTOOL_DECLARE_LINK_MODE_MASK(adv_old); - + /* used for eee validation and configuration*/ + __ETHTOOL_DECLARE_LINK_MODE_MASK(supported_eee); + __ETHTOOL_DECLARE_LINK_MODE_MASK(advertising_eee); /* Energy efficient ethernet modes which should be prohibited */ - u32 eee_broken_modes; + __ETHTOOL_DECLARE_LINK_MODE_MASK(eee_disabled_modes); + bool enable_tx_lpi; + bool eee_active; + struct eee_config eee_cfg; + + /* Host supported PHY interface types. Should be ignored if empty. */ + DECLARE_PHY_INTERFACE_MASK(host_interfaces); #ifdef CONFIG_LED_TRIGGER_PHY struct phy_led_trigger *phy_led_triggers; @@ -609,6 +690,7 @@ struct phy_device { struct phy_led_trigger *led_link_trigger; #endif + struct list_head leds; /* * Interrupt number for this PHY @@ -640,10 +722,15 @@ struct phy_device { struct phylink *phylink; struct net_device *attached_dev; struct mii_timestamper *mii_ts; + struct pse_control *psec; u8 mdix; u8 mdix_ctrl; + int pma_extable; + + unsigned int link_down_events; + void (*phy_link_change)(struct phy_device *phydev, bool up); void (*adjust_link)(struct net_device *dev); @@ -652,8 +739,12 @@ struct phy_device { const struct macsec_ops *macsec_ops; #endif }; -#define to_phy_device(d) container_of(to_mdio_device(d), \ - struct phy_device, mdio) + +/* Generic phy_device::dev_flags */ +#define PHY_F_NO_IRQ 0x80000000 +#define PHY_F_RXC_ALWAYS_ON 0x40000000 + +#define to_phy_device(__dev) container_of_const(to_mdio_device(__dev), struct phy_device, mdio) /** * struct phy_tdr_config - Configuration of a TDR raw test @@ -677,6 +768,108 @@ struct phy_tdr_config { #define PHY_PAIR_ALL -1 /** + * enum link_inband_signalling - in-band signalling modes that are supported + * + * @LINK_INBAND_DISABLE: in-band signalling can be disabled + * @LINK_INBAND_ENABLE: in-band signalling can be enabled without bypass + * @LINK_INBAND_BYPASS: in-band signalling can be enabled with bypass + * + * The possible and required bits can only be used if the valid bit is set. + * If possible is clear, that means inband signalling can not be used. + * Required is only valid when possible is set, and means that inband + * signalling must be used. + */ +enum link_inband_signalling { + LINK_INBAND_DISABLE = BIT(0), + LINK_INBAND_ENABLE = BIT(1), + LINK_INBAND_BYPASS = BIT(2), +}; + +/** + * struct phy_plca_cfg - Configuration of the PLCA (Physical Layer Collision + * Avoidance) Reconciliation Sublayer. + * + * @version: read-only PLCA register map version. -1 = not available. Ignored + * when setting the configuration. Format is the same as reported by the PLCA + * IDVER register (31.CA00). -1 = not available. + * @enabled: PLCA configured mode (enabled/disabled). -1 = not available / don't + * set. 0 = disabled, anything else = enabled. + * @node_id: the PLCA local node identifier. -1 = not available / don't set. + * Allowed values [0 .. 254]. 255 = node disabled. + * @node_cnt: the PLCA node count (maximum number of nodes having a TO). Only + * meaningful for the coordinator (node_id = 0). -1 = not available / don't + * set. Allowed values [1 .. 255]. + * @to_tmr: The value of the PLCA to_timer in bit-times, which determines the + * PLCA transmit opportunity window opening. See IEEE802.3 Clause 148 for + * more details. The to_timer shall be set equal over all nodes. + * -1 = not available / don't set. Allowed values [0 .. 255]. + * @burst_cnt: controls how many additional frames a node is allowed to send in + * single transmit opportunity (TO). The default value of 0 means that the + * node is allowed exactly one frame per TO. A value of 1 allows two frames + * per TO, and so on. -1 = not available / don't set. + * Allowed values [0 .. 255]. + * @burst_tmr: controls how many bit times to wait for the MAC to send a new + * frame before interrupting the burst. This value should be set to a value + * greater than the MAC inter-packet gap (which is typically 96 bits). + * -1 = not available / don't set. Allowed values [0 .. 255]. + * + * A structure containing configuration parameters for setting/getting the PLCA + * RS configuration. The driver does not need to implement all the parameters, + * but should report what is actually used. + */ +struct phy_plca_cfg { + int version; + int enabled; + int node_id; + int node_cnt; + int to_tmr; + int burst_cnt; + int burst_tmr; +}; + +/** + * struct phy_plca_status - Status of the PLCA (Physical Layer Collision + * Avoidance) Reconciliation Sublayer. + * + * @pst: The PLCA status as reported by the PST bit in the PLCA STATUS + * register(31.CA03), indicating BEACON activity. + * + * A structure containing status information of the PLCA RS configuration. + * The driver does not need to implement all the parameters, but should report + * what is actually used. + */ +struct phy_plca_status { + bool pst; +}; + +/* Modes for PHY LED configuration */ +enum phy_led_modes { + PHY_LED_ACTIVE_HIGH = 0, + PHY_LED_ACTIVE_LOW = 1, + PHY_LED_INACTIVE_HIGH_IMPEDANCE = 2, + + /* keep it last */ + __PHY_LED_MODES_NUM, +}; + +/** + * struct phy_led: An LED driven by the PHY + * + * @list: List of LEDs + * @phydev: PHY this LED is attached to + * @led_cdev: Standard LED class structure + * @index: Number of the LED + */ +struct phy_led { + struct list_head list; + struct phy_device *phydev; + struct led_classdev led_cdev; + u8 index; +}; + +#define to_phy_led(d) container_of(d, struct phy_led, led_cdev) + +/** * struct phy_driver - Driver structure for a particular PHY type * * @mdiodrv: Data common to all MDIO devices @@ -731,6 +924,31 @@ struct phy_driver { */ int (*get_features)(struct phy_device *phydev); + /** + * @inband_caps: query whether in-band is supported for the given PHY + * interface mode. Returns a bitmask of bits defined by enum + * link_inband_signalling. + */ + unsigned int (*inband_caps)(struct phy_device *phydev, + phy_interface_t interface); + + /** + * @config_inband: configure in-band mode for the PHY + */ + int (*config_inband)(struct phy_device *phydev, unsigned int modes); + + /** + * @get_rate_matching: Get the supported type of rate matching for a + * particular phy interface. This is used by phy consumers to determine + * whether to advertise lower-speed modes for that interface. It is + * assumed that if a rate matching mode is supported on an interface, + * then that interface's rate can be adapted to all slower link speeds + * supported by the phy. If the interface is not supported, this should + * return %RATE_MATCH_NONE. + */ + int (*get_rate_matching)(struct phy_device *phydev, + phy_interface_t iface); + /* PHY Power Management */ /** @suspend: Suspend the hardware, saving state if needed */ int (*suspend)(struct phy_device *phydev); @@ -751,18 +969,12 @@ struct phy_driver { /** @read_status: Determines the negotiated speed and duplex */ int (*read_status)(struct phy_device *phydev); - /** @ack_interrupt: Clears any pending interrupts */ - int (*ack_interrupt)(struct phy_device *phydev); - - /** @config_intr: Enables or disables interrupts */ - int (*config_intr)(struct phy_device *phydev); - /** - * @did_interrupt: Checks if the PHY generated an interrupt. - * For multi-PHY devices with shared PHY interrupt pin - * Set interrupt bits have to be cleared. + * @config_intr: Enables or disables interrupts. + * It should also clear any pending interrupts prior to enabling the + * IRQs and after disabling them. */ - int (*did_interrupt)(struct phy_device *phydev); + int (*config_intr)(struct phy_device *phydev); /** @handle_interrupt: Override default interrupt handling */ irqreturn_t (*handle_interrupt)(struct phy_device *phydev); @@ -775,7 +987,8 @@ struct phy_driver { * driver for the given phydev. If NULL, matching is based on * phy_id and phy_id_mask. */ - int (*match_phy_device)(struct phy_device *phydev); + int (*match_phy_device)(struct phy_device *phydev, + const struct phy_driver *phydrv); /** * @set_wol: Some devices (e.g. qnap TS-119P II) require PHY @@ -859,6 +1072,53 @@ struct phy_driver { int (*cable_test_get_status)(struct phy_device *dev, bool *finished); /* Get statistics from the PHY using ethtool */ + /** + * @get_phy_stats: Retrieve PHY statistics. + * @dev: The PHY device for which the statistics are retrieved. + * @eth_stats: structure where Ethernet PHY stats will be stored. + * @stats: structure where additional PHY-specific stats will be stored. + * + * Retrieves the supported PHY statistics and populates the provided + * structures. The input structures are pre-initialized with + * `ETHTOOL_STAT_NOT_SET`, and the driver must only modify members + * corresponding to supported statistics. Unmodified members will remain + * set to `ETHTOOL_STAT_NOT_SET` and will not be returned to userspace. + */ + void (*get_phy_stats)(struct phy_device *dev, + struct ethtool_eth_phy_stats *eth_stats, + struct ethtool_phy_stats *stats); + + /** + * @get_link_stats: Retrieve link statistics. + * @dev: The PHY device for which the statistics are retrieved. + * @link_stats: structure where link-specific stats will be stored. + * + * Retrieves link-related statistics for the given PHY device. The input + * structure is pre-initialized with `ETHTOOL_STAT_NOT_SET`, and the + * driver must only modify members corresponding to supported + * statistics. Unmodified members will remain set to + * `ETHTOOL_STAT_NOT_SET` and will not be returned to userspace. + */ + void (*get_link_stats)(struct phy_device *dev, + struct ethtool_link_ext_stats *link_stats); + + /** + * @update_stats: Trigger periodic statistics updates. + * @dev: The PHY device for which statistics updates are triggered. + * + * Periodically gathers statistics from the PHY device to update locally + * maintained 64-bit counters. This is necessary for PHYs that implement + * reduced-width counters (e.g., 16-bit or 32-bit) which can overflow + * more frequently compared to 64-bit counters. By invoking this + * callback, drivers can fetch the current counter values, handle + * overflow detection, and accumulate the results into local 64-bit + * counters for accurate reporting through the `get_phy_stats` and + * `get_link_stats` interfaces. + * + * Return: 0 on success or a negative error code on failure. + */ + int (*update_stats)(struct phy_device *dev); + /** @get_sset_count: Number of statistic counters */ int (*get_sset_count)(struct phy_device *dev); /** @get_strings: Names of the statistic counters */ @@ -875,52 +1135,152 @@ struct phy_driver { int (*set_tunable)(struct phy_device *dev, struct ethtool_tunable *tuna, const void *data); - /** @set_loopback: Set the loopback mood of the PHY */ - int (*set_loopback)(struct phy_device *dev, bool enable); + /** + * @set_loopback: Set the loopback mode of the PHY + * enable selects if the loopback mode is enabled or disabled. If the + * loopback mode is enabled, then the speed of the loopback mode can be + * requested with the speed argument. If the speed argument is zero, + * then any speed can be selected. If the speed argument is > 0, then + * this speed shall be selected for the loopback mode or EOPNOTSUPP + * shall be returned if speed selection is not supported. + */ + int (*set_loopback)(struct phy_device *dev, bool enable, int speed); /** @get_sqi: Get the signal quality indication */ int (*get_sqi)(struct phy_device *dev); /** @get_sqi_max: Get the maximum signal quality indication */ int (*get_sqi_max)(struct phy_device *dev); + + /* PLCA RS interface */ + /** @get_plca_cfg: Return the current PLCA configuration */ + int (*get_plca_cfg)(struct phy_device *dev, + struct phy_plca_cfg *plca_cfg); + /** @set_plca_cfg: Set the PLCA configuration */ + int (*set_plca_cfg)(struct phy_device *dev, + const struct phy_plca_cfg *plca_cfg); + /** @get_plca_status: Return the current PLCA status info */ + int (*get_plca_status)(struct phy_device *dev, + struct phy_plca_status *plca_st); + + /** + * @led_brightness_set: Set a PHY LED brightness. Index + * indicates which of the PHYs led should be set. Value + * follows the standard LED class meaning, e.g. LED_OFF, + * LED_HALF, LED_FULL. + */ + int (*led_brightness_set)(struct phy_device *dev, + u8 index, enum led_brightness value); + + /** + * @led_blink_set: Set a PHY LED blinking. Index indicates + * which of the PHYs led should be configured to blink. Delays + * are in milliseconds and if both are zero then a sensible + * default should be chosen. The call should adjust the + * timings in that case and if it can't match the values + * specified exactly. + */ + int (*led_blink_set)(struct phy_device *dev, u8 index, + unsigned long *delay_on, + unsigned long *delay_off); + /** + * @led_hw_is_supported: Can the HW support the given rules. + * @dev: PHY device which has the LED + * @index: Which LED of the PHY device + * @rules The core is interested in these rules + * + * Return 0 if yes, -EOPNOTSUPP if not, or an error code. + */ + int (*led_hw_is_supported)(struct phy_device *dev, u8 index, + unsigned long rules); + /** + * @led_hw_control_set: Set the HW to control the LED + * @dev: PHY device which has the LED + * @index: Which LED of the PHY device + * @rules The rules used to control the LED + * + * Returns 0, or a an error code. + */ + int (*led_hw_control_set)(struct phy_device *dev, u8 index, + unsigned long rules); + /** + * @led_hw_control_get: Get how the HW is controlling the LED + * @dev: PHY device which has the LED + * @index: Which LED of the PHY device + * @rules Pointer to the rules used to control the LED + * + * Set *@rules to how the HW is currently blinking. Returns 0 + * on success, or a error code if the current blinking cannot + * be represented in rules, or some other error happens. + */ + int (*led_hw_control_get)(struct phy_device *dev, u8 index, + unsigned long *rules); + + /** + * @led_polarity_set: Set the LED polarity modes + * @dev: PHY device which has the LED + * @index: Which LED of the PHY device + * @modes: bitmap of LED polarity modes + * + * Configure LED with all the required polarity modes in @modes + * to make it correctly turn ON or OFF. + * + * Returns 0, or an error code. + */ + int (*led_polarity_set)(struct phy_device *dev, int index, + unsigned long modes); + + /** + * @get_next_update_time: Get the time until the next update event + * @dev: PHY device + * + * Callback to determine the time (in jiffies) until the next + * update event for the PHY state machine. Allows PHY drivers to + * dynamically adjust polling intervals based on link state or other + * conditions. + * + * Returns the time in jiffies until the next update event. + */ + unsigned int (*get_next_update_time)(struct phy_device *dev); }; -#define to_phy_driver(d) container_of(to_mdio_common_driver(d), \ +#define to_phy_driver(d) container_of_const(to_mdio_common_driver(d), \ struct phy_driver, mdiodrv) -#define PHY_ANY_ID "MATCH ANY PHY" -#define PHY_ANY_UID 0xffffffff - #define PHY_ID_MATCH_EXACT(id) .phy_id = (id), .phy_id_mask = GENMASK(31, 0) #define PHY_ID_MATCH_MODEL(id) .phy_id = (id), .phy_id_mask = GENMASK(31, 4) #define PHY_ID_MATCH_VENDOR(id) .phy_id = (id), .phy_id_mask = GENMASK(31, 10) -/* A Structure for boards to register fixups with the PHY Lib */ -struct phy_fixup { - struct list_head list; - char bus_id[MII_BUS_ID_SIZE + 3]; - u32 phy_uid; - u32 phy_uid_mask; - int (*run)(struct phy_device *phydev); -}; +/** + * phy_id_compare - compare @id1 with @id2 taking account of @mask + * @id1: first PHY ID + * @id2: second PHY ID + * @mask: the PHY ID mask, set bits are significant in matching + * + * Return true if the bits from @id1 and @id2 specified by @mask match. + * This uses an equivalent test to (@id & @mask) == (@phy_id & @mask). + */ +static inline bool phy_id_compare(u32 id1, u32 id2, u32 mask) +{ + return !((id1 ^ id2) & mask); +} + +/** + * phydev_id_compare - compare @id with the PHY's Clause 22 ID + * @phydev: the PHY device + * @id: the PHY ID to be matched + * + * Compare the @phydev clause 22 ID with the provided @id and return true or + * false depending whether it matches, using the bound driver mask. The + * @phydev must be bound to a driver. + */ +static inline bool phydev_id_compare(struct phy_device *phydev, u32 id) +{ + return phy_id_compare(id, phydev->phy_id, phydev->drv->phy_id_mask); +} const char *phy_speed_to_str(int speed); const char *phy_duplex_to_str(unsigned int duplex); +const char *phy_rate_matching_to_str(int rate_matching); -/* A structure for mapping a particular speed and duplex - * combination to a particular SUPPORTED and ADVERTISED value - */ -struct phy_setting { - u32 speed; - u8 duplex; - u8 bit; -}; - -const struct phy_setting * -phy_lookup_setting(int speed, int duplex, const unsigned long *mask, - bool exact); -size_t phy_speeds(unsigned int *speeds, size_t size, - unsigned long *mask); -void of_set_phy_supported(struct phy_device *phydev); -void of_set_phy_eee_broken(struct phy_device *phydev); -int phy_speed_down_core(struct phy_device *phydev); +int phy_interface_num_ports(phy_interface_t interface); /** * phy_is_started - Convenience function to check whether PHY is started @@ -931,9 +1291,21 @@ static inline bool phy_is_started(struct phy_device *phydev) return phydev->state >= PHY_UP; } +/** + * phy_disable_eee_mode - Don't advertise an EEE mode. + * @phydev: The phy_device struct + * @link_mode: The EEE mode to be disabled + */ +static inline void phy_disable_eee_mode(struct phy_device *phydev, u32 link_mode) +{ + WARN_ON(phy_is_started(phydev)); + + linkmode_set_bit(link_mode, phydev->eee_disabled_modes); + linkmode_clear_bit(link_mode, phydev->advertising_eee); +} + void phy_resolve_aneg_pause(struct phy_device *phydev); void phy_resolve_aneg_linkmode(struct phy_device *phydev); -void phy_check_downshift(struct phy_device *phydev); /** * phy_read - Convenience function for reading a given PHY register @@ -952,16 +1324,17 @@ static inline int phy_read(struct phy_device *phydev, u32 regnum) #define phy_read_poll_timeout(phydev, regnum, val, cond, sleep_us, \ timeout_us, sleep_before_read) \ ({ \ - int __ret = read_poll_timeout(phy_read, val, (cond) || val < 0, \ + int __ret, __val; \ + __ret = read_poll_timeout(__val = phy_read, val, \ + __val < 0 || (cond), \ sleep_us, timeout_us, sleep_before_read, phydev, regnum); \ - if (val < 0) \ - __ret = val; \ + if (__val < 0) \ + __ret = __val; \ if (__ret) \ phydev_err(phydev, "%s failed: %d\n", __func__, __ret); \ __ret; \ }) - /** * __phy_read - convenience function for reading a given PHY register * @phydev: the phy_device struct @@ -1022,14 +1395,9 @@ static inline int __phy_modify_changed(struct phy_device *phydev, u32 regnum, regnum, mask, set); } -/** +/* * phy_read_mmd - Convenience function for reading a register * from an MMD on a given PHY. - * @phydev: The phy_device struct - * @devad: The MMD to read from - * @regnum: The register on the MMD to read - * - * Same rules as for phy_read(); */ int phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum); @@ -1042,60 +1410,46 @@ int phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum); * @regnum: The register on the MMD to read * @val: Variable to read the register into * @cond: Break condition (usually involving @val) - * @sleep_us: Maximum time to sleep between reads in us (0 - * tight-loops). Should be less than ~20ms since usleep_range - * is used (see Documentation/timers/timers-howto.rst). + * @sleep_us: Maximum time to sleep between reads in us (0 tight-loops). Please + * read usleep_range() function description for details and + * limitations. * @timeout_us: Timeout in us, 0 means never timeout * @sleep_before_read: if it is true, sleep @sleep_us before read. - * Returns 0 on success and -ETIMEDOUT upon a timeout. In either + * + * Returns: 0 on success and -ETIMEDOUT upon a timeout. In either * case, the last read value at @args is stored in @val. Must not * be called from atomic context if sleep_us or timeout_us are used. */ #define phy_read_mmd_poll_timeout(phydev, devaddr, regnum, val, cond, \ sleep_us, timeout_us, sleep_before_read) \ ({ \ - int __ret = read_poll_timeout(phy_read_mmd, val, (cond) || val < 0, \ + int __ret, __val; \ + __ret = read_poll_timeout(__val = phy_read_mmd, val, \ + __val < 0 || (cond), \ sleep_us, timeout_us, sleep_before_read, \ phydev, devaddr, regnum); \ - if (val < 0) \ - __ret = val; \ + if (__val < 0) \ + __ret = __val; \ if (__ret) \ phydev_err(phydev, "%s failed: %d\n", __func__, __ret); \ __ret; \ }) -/** +/* * __phy_read_mmd - Convenience function for reading a register * from an MMD on a given PHY. - * @phydev: The phy_device struct - * @devad: The MMD to read from - * @regnum: The register on the MMD to read - * - * Same rules as for __phy_read(); */ int __phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum); -/** +/* * phy_write_mmd - Convenience function for writing a register * on an MMD on a given PHY. - * @phydev: The phy_device struct - * @devad: The MMD to write to - * @regnum: The register on the MMD to read - * @val: value to write to @regnum - * - * Same rules as for phy_write(); */ int phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val); -/** +/* * __phy_write_mmd - Convenience function for writing a register * on an MMD on a given PHY. - * @phydev: The phy_device struct - * @devad: The MMD to write to - * @regnum: The register on the MMD to read - * @val: value to write to @regnum - * - * Same rules as for __phy_write(); */ int __phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val); @@ -1229,11 +1583,11 @@ static inline int phy_clear_bits_mmd(struct phy_device *phydev, int devad, * @phydev: the phy_device struct * * NOTE: must be kept in sync with addition/removal of PHY_POLL and - * PHY_IGNORE_INTERRUPT + * PHY_MAC_INTERRUPT */ static inline bool phy_interrupt_is_valid(struct phy_device *phydev) { - return phydev->irq != PHY_POLL && phydev->irq != PHY_IGNORE_INTERRUPT; + return phydev->irq != PHY_POLL && phydev->irq != PHY_MAC_INTERRUPT; } /** @@ -1247,6 +1601,9 @@ static inline bool phy_polling_mode(struct phy_device *phydev) if (phydev->drv->flags & PHY_POLL_CABLE_TEST) return true; + if (phydev->drv->update_stats) + return true; + return phydev->irq == PHY_POLL; } @@ -1287,9 +1644,11 @@ static inline bool phy_has_txtstamp(struct phy_device *phydev) return phydev && phydev->mii_ts && phydev->mii_ts->txtstamp; } -static inline int phy_hwtstamp(struct phy_device *phydev, struct ifreq *ifr) +static inline int phy_hwtstamp(struct phy_device *phydev, + struct kernel_hwtstamp_config *cfg, + struct netlink_ext_ack *extack) { - return phydev->mii_ts->hwtstamp(phydev->mii_ts, ifr); + return phydev->mii_ts->hwtstamp(phydev->mii_ts, cfg, extack); } static inline bool phy_rxtstamp(struct phy_device *phydev, struct sk_buff *skb, @@ -1299,7 +1658,7 @@ static inline bool phy_rxtstamp(struct phy_device *phydev, struct sk_buff *skb, } static inline int phy_ts_info(struct phy_device *phydev, - struct ethtool_ts_info *tsinfo) + struct kernel_ethtool_ts_info *tsinfo) { return phydev->mii_ts->ts_info(phydev->mii_ts, tsinfo); } @@ -1311,12 +1670,27 @@ static inline void phy_txtstamp(struct phy_device *phydev, struct sk_buff *skb, } /** - * phy_is_internal - Convenience function for testing if a PHY is internal + * phy_is_default_hwtstamp - Is the PHY hwtstamp the default timestamp + * @phydev: Pointer to phy_device + * + * This is used to get default timestamping device taking into account + * the new API choice, which is selecting the timestamping from MAC by + * default if the phydev does not have default_timestamp flag enabled. + * + * Return: True if phy is the default hw timestamp, false otherwise. + */ +static inline bool phy_is_default_hwtstamp(struct phy_device *phydev) +{ + return phy_has_hwtstamp(phydev) && phydev->default_timestamp; +} + +/** + * phy_on_sfp - Convenience function for testing if a PHY is on an SFP module * @phydev: the phy_device struct */ -static inline bool phy_is_internal(struct phy_device *phydev) +static inline bool phy_on_sfp(struct phy_device *phydev) { - return phydev->is_internal; + return phydev->is_on_sfp_module; } /** @@ -1377,30 +1751,22 @@ int phy_modify_paged(struct phy_device *phydev, int page, u32 regnum, struct phy_device *phy_device_create(struct mii_bus *bus, int addr, u32 phy_id, bool is_c45, struct phy_c45_device_ids *c45_ids); -#if IS_ENABLED(CONFIG_PHYLIB) +int fwnode_get_phy_id(struct fwnode_handle *fwnode, u32 *phy_id); +struct mdio_device *fwnode_mdio_find_device(struct fwnode_handle *fwnode); +struct phy_device *fwnode_phy_find_device(struct fwnode_handle *phy_fwnode); +struct fwnode_handle *fwnode_get_phy_node(const struct fwnode_handle *fwnode); struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45); int phy_device_register(struct phy_device *phy); void phy_device_free(struct phy_device *phydev); -#else -static inline -struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45) -{ - return NULL; -} - -static inline int phy_device_register(struct phy_device *phy) -{ - return 0; -} - -static inline void phy_device_free(struct phy_device *phydev) { } -#endif /* CONFIG_PHYLIB */ void phy_device_remove(struct phy_device *phydev); +int phy_get_c45_ids(struct phy_device *phydev); int phy_init_hw(struct phy_device *phydev); int phy_suspend(struct phy_device *phydev); int phy_resume(struct phy_device *phydev); int __phy_resume(struct phy_device *phydev); -int phy_loopback(struct phy_device *phydev, bool enable); +int phy_loopback(struct phy_device *phydev, bool enable, int speed); +int phy_sfp_connect_phy(void *upstream, struct phy_device *phy); +void phy_sfp_disconnect_phy(void *upstream, struct phy_device *phy); void phy_sfp_attach(void *upstream, struct sfp_bus *bus); void phy_sfp_detach(void *upstream, struct sfp_bus *bus); int phy_sfp_probe(struct phy_device *phydev, @@ -1420,10 +1786,16 @@ void phy_disconnect(struct phy_device *phydev); void phy_detach(struct phy_device *phydev); void phy_start(struct phy_device *phydev); void phy_stop(struct phy_device *phydev); +int phy_config_aneg(struct phy_device *phydev); +int _phy_start_aneg(struct phy_device *phydev); int phy_start_aneg(struct phy_device *phydev); int phy_aneg_done(struct phy_device *phydev); +unsigned int phy_inband_caps(struct phy_device *phydev, + phy_interface_t interface); +int phy_config_inband(struct phy_device *phydev, unsigned int modes); int phy_speed_down(struct phy_device *phydev, bool sync); int phy_speed_up(struct phy_device *phydev); +bool phy_check_valid(int speed, int duplex, unsigned long *features); int phy_restart_aneg(struct phy_device *phydev); int phy_reset_after_clk_enable(struct phy_device *phydev); @@ -1452,10 +1824,6 @@ int phy_start_cable_test_tdr(struct phy_device *phydev, } #endif -int phy_cable_test_result(struct phy_device *phydev, u8 pair, u16 result); -int phy_cable_test_fault_length(struct phy_device *phydev, u8 pair, - u16 cm); - static inline void phy_device_reset(struct phy_device *phydev, int value) { mdio_device_reset(&phydev->mdio, value); @@ -1464,6 +1832,9 @@ static inline void phy_device_reset(struct phy_device *phydev, int value) #define phydev_err(_phydev, format, args...) \ dev_err(&_phydev->mdio.dev, format, ##args) +#define phydev_err_probe(_phydev, err, format, args...) \ + dev_err_probe(&_phydev->mdio.dev, err, format, ##args) + #define phydev_info(_phydev, format, args...) \ dev_info(&_phydev->mdio.dev, format, ##args) @@ -1494,32 +1865,32 @@ char *phy_attached_info_irq(struct phy_device *phydev) __malloc; void phy_attached_info(struct phy_device *phydev); +int genphy_match_phy_device(struct phy_device *phydev, + const struct phy_driver *phydrv); + /* Clause 22 PHY */ int genphy_read_abilities(struct phy_device *phydev); int genphy_setup_forced(struct phy_device *phydev); int genphy_restart_aneg(struct phy_device *phydev); int genphy_check_and_restart_aneg(struct phy_device *phydev, bool restart); -int genphy_config_eee_advert(struct phy_device *phydev); int __genphy_config_aneg(struct phy_device *phydev, bool changed); int genphy_aneg_done(struct phy_device *phydev); int genphy_update_link(struct phy_device *phydev); int genphy_read_lpa(struct phy_device *phydev); int genphy_read_status_fixed(struct phy_device *phydev); int genphy_read_status(struct phy_device *phydev); +int genphy_read_master_slave(struct phy_device *phydev); int genphy_suspend(struct phy_device *phydev); int genphy_resume(struct phy_device *phydev); -int genphy_loopback(struct phy_device *phydev, bool enable); +int genphy_loopback(struct phy_device *phydev, bool enable, int speed); int genphy_soft_reset(struct phy_device *phydev); +irqreturn_t genphy_handle_interrupt_no_ack(struct phy_device *phydev); static inline int genphy_config_aneg(struct phy_device *phydev) { return __genphy_config_aneg(phydev, false); } -static inline int genphy_no_ack_interrupt(struct phy_device *phydev) -{ - return 0; -} static inline int genphy_no_config_intr(struct phy_device *phydev) { return 0; @@ -1531,7 +1902,7 @@ int genphy_write_mmd_unsupported(struct phy_device *phdev, int devnum, /* Clause 37 */ int genphy_c37_config_aneg(struct phy_device *phydev); -int genphy_c37_read_status(struct phy_device *phydev); +int genphy_c37_read_status(struct phy_device *phydev, bool *changed); /* Clause 45 PHY */ int genphy_c45_restart_aneg(struct phy_device *phydev); @@ -1541,12 +1912,34 @@ int genphy_c45_read_link(struct phy_device *phydev); int genphy_c45_read_lpa(struct phy_device *phydev); int genphy_c45_read_pma(struct phy_device *phydev); int genphy_c45_pma_setup_forced(struct phy_device *phydev); +int genphy_c45_pma_baset1_setup_master_slave(struct phy_device *phydev); int genphy_c45_an_config_aneg(struct phy_device *phydev); int genphy_c45_an_disable_aneg(struct phy_device *phydev); int genphy_c45_read_mdix(struct phy_device *phydev); int genphy_c45_pma_read_abilities(struct phy_device *phydev); +int genphy_c45_pma_read_ext_abilities(struct phy_device *phydev); +int genphy_c45_pma_baset1_read_abilities(struct phy_device *phydev); +int genphy_c45_read_eee_abilities(struct phy_device *phydev); +int genphy_c45_pma_baset1_read_master_slave(struct phy_device *phydev); int genphy_c45_read_status(struct phy_device *phydev); +int genphy_c45_baset1_read_status(struct phy_device *phydev); int genphy_c45_config_aneg(struct phy_device *phydev); +int genphy_c45_loopback(struct phy_device *phydev, bool enable, int speed); +int genphy_c45_pma_resume(struct phy_device *phydev); +int genphy_c45_pma_suspend(struct phy_device *phydev); +int genphy_c45_fast_retrain(struct phy_device *phydev, bool enable); +int genphy_c45_plca_get_cfg(struct phy_device *phydev, + struct phy_plca_cfg *plca_cfg); +int genphy_c45_plca_set_cfg(struct phy_device *phydev, + const struct phy_plca_cfg *plca_cfg); +int genphy_c45_plca_get_status(struct phy_device *phydev, + struct phy_plca_status *plca_st); +int genphy_c45_eee_is_active(struct phy_device *phydev, unsigned long *lp); +int genphy_c45_ethtool_get_eee(struct phy_device *phydev, + struct ethtool_keee *data); +int genphy_c45_ethtool_set_eee(struct phy_device *phydev, + struct ethtool_keee *data); +int genphy_c45_an_config_eee_aneg(struct phy_device *phydev); /* Generic C45 PHY driver */ extern struct phy_driver genphy_c45_driver; @@ -1570,8 +1963,9 @@ void phy_drivers_unregister(struct phy_driver *drv, int n); int phy_driver_register(struct phy_driver *new_driver, struct module *owner); int phy_drivers_register(struct phy_driver *new_driver, int n, struct module *owner); +void phy_error(struct phy_device *phydev); void phy_state_machine(struct work_struct *work); -void phy_queue_state_machine(struct phy_device *phydev, unsigned long jiffies); +void phy_trigger_machine(struct phy_device *phydev); void phy_mac_interrupt(struct phy_device *phydev); void phy_start_machine(struct phy_device *phydev); void phy_stop_machine(struct phy_device *phydev); @@ -1586,11 +1980,16 @@ int phy_disable_interrupts(struct phy_device *phydev); void phy_request_interrupt(struct phy_device *phydev); void phy_free_interrupt(struct phy_device *phydev); void phy_print_status(struct phy_device *phydev); -int phy_set_max_speed(struct phy_device *phydev, u32 max_speed); +int phy_get_rate_matching(struct phy_device *phydev, + phy_interface_t iface); +void phy_set_max_speed(struct phy_device *phydev, u32 max_speed); void phy_remove_link_mode(struct phy_device *phydev, u32 link_mode); void phy_advertise_supported(struct phy_device *phydev); +void phy_advertise_eee_all(struct phy_device *phydev); void phy_support_sym_pause(struct phy_device *phydev); void phy_support_asym_pause(struct phy_device *phydev); +void phy_support_eee(struct phy_device *phydev); +void phy_disable_eee(struct phy_device *phydev); void phy_set_sym_pause(struct phy_device *phydev, bool rx, bool tx, bool autoneg); void phy_set_asym_pause(struct phy_device *phydev, bool rx, bool tx); @@ -1601,11 +2000,16 @@ void phy_get_pause(struct phy_device *phydev, bool *tx_pause, bool *rx_pause); s32 phy_get_internal_delay(struct phy_device *phydev, struct device *dev, const int *delay_values, int size, bool is_rx); +int phy_get_tx_amplitude_gain(struct phy_device *phydev, struct device *dev, + enum ethtool_link_mode_bit_indices linkmode, + u32 *val); + +int phy_get_mac_termination(struct phy_device *phydev, struct device *dev, + u32 *val); + void phy_resolve_pause(unsigned long *local_adv, unsigned long *partner_adv, bool *tx_pause, bool *rx_pause); -int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask, - int (*run)(struct phy_device *)); int phy_register_fixup_for_id(const char *bus_id, int (*run)(struct phy_device *)); int phy_register_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask, @@ -1615,10 +2019,12 @@ int phy_unregister_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask); int phy_unregister_fixup_for_id(const char *bus_id); int phy_unregister_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask); +int phy_eee_tx_clock_stop_capable(struct phy_device *phydev); +int phy_eee_rx_clock_stop(struct phy_device *phydev, bool clk_stop_enable); int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable); int phy_get_eee_err(struct phy_device *phydev); -int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data); -int phy_ethtool_get_eee(struct phy_device *phydev, struct ethtool_eee *data); +int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_keee *data); +int phy_ethtool_get_eee(struct phy_device *phydev, struct ethtool_keee *data); int phy_ethtool_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol); void phy_ethtool_get_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol); @@ -1627,85 +2033,34 @@ int phy_ethtool_get_link_ksettings(struct net_device *ndev, int phy_ethtool_set_link_ksettings(struct net_device *ndev, const struct ethtool_link_ksettings *cmd); int phy_ethtool_nway_reset(struct net_device *ndev); -int phy_package_join(struct phy_device *phydev, int addr, size_t priv_size); -void phy_package_leave(struct phy_device *phydev); -int devm_phy_package_join(struct device *dev, struct phy_device *phydev, - int addr, size_t priv_size); - -#if IS_ENABLED(CONFIG_PHYLIB) -int __init mdio_bus_init(void); -void mdio_bus_exit(void); -#endif int phy_ethtool_get_strings(struct phy_device *phydev, u8 *data); int phy_ethtool_get_sset_count(struct phy_device *phydev); int phy_ethtool_get_stats(struct phy_device *phydev, struct ethtool_stats *stats, u64 *data); -static inline int phy_package_read(struct phy_device *phydev, u32 regnum) -{ - struct phy_package_shared *shared = phydev->shared; - - if (!shared) - return -EIO; - - return mdiobus_read(phydev->mdio.bus, shared->addr, regnum); -} - -static inline int __phy_package_read(struct phy_device *phydev, u32 regnum) -{ - struct phy_package_shared *shared = phydev->shared; - - if (!shared) - return -EIO; - - return __mdiobus_read(phydev->mdio.bus, shared->addr, regnum); -} - -static inline int phy_package_write(struct phy_device *phydev, - u32 regnum, u16 val) -{ - struct phy_package_shared *shared = phydev->shared; - - if (!shared) - return -EIO; - - return mdiobus_write(phydev->mdio.bus, shared->addr, regnum, val); -} - -static inline int __phy_package_write(struct phy_device *phydev, - u32 regnum, u16 val) -{ - struct phy_package_shared *shared = phydev->shared; - - if (!shared) - return -EIO; - - return __mdiobus_write(phydev->mdio.bus, shared->addr, regnum, val); -} - -static inline bool __phy_package_set_once(struct phy_device *phydev, - unsigned int b) -{ - struct phy_package_shared *shared = phydev->shared; - - if (!shared) - return false; - - return !test_and_set_bit(b, &shared->flags); -} - -static inline bool phy_package_init_once(struct phy_device *phydev) -{ - return __phy_package_set_once(phydev, PHY_SHARED_F_INIT_DONE); -} - -static inline bool phy_package_probe_once(struct phy_device *phydev) -{ - return __phy_package_set_once(phydev, PHY_SHARED_F_PROBE_DONE); -} - -extern struct bus_type mdio_bus_type; +void __phy_ethtool_get_phy_stats(struct phy_device *phydev, + struct ethtool_eth_phy_stats *phy_stats, + struct ethtool_phy_stats *phydev_stats); +void __phy_ethtool_get_link_ext_stats(struct phy_device *phydev, + struct ethtool_link_ext_stats *link_stats); + +int phy_ethtool_get_plca_cfg(struct phy_device *phydev, + struct phy_plca_cfg *plca_cfg); +int phy_ethtool_set_plca_cfg(struct phy_device *phydev, + const struct phy_plca_cfg *plca_cfg, + struct netlink_ext_ack *extack); +int phy_ethtool_get_plca_status(struct phy_device *phydev, + struct phy_plca_status *plca_st); + +int __phy_hwtstamp_get(struct phy_device *phydev, + struct kernel_hwtstamp_config *config); +int __phy_hwtstamp_set(struct phy_device *phydev, + struct kernel_hwtstamp_config *config, + struct netlink_ext_ack *extack); + +extern const struct bus_type mdio_bus_type; +extern const struct class mdio_bus_class; struct mdio_board_info { const char *bus_id; @@ -1714,17 +2069,8 @@ struct mdio_board_info { const void *platform_data; }; -#if IS_ENABLED(CONFIG_MDIO_DEVICE) int mdiobus_register_board_info(const struct mdio_board_info *info, unsigned int n); -#else -static inline int mdiobus_register_board_info(const struct mdio_board_info *i, - unsigned int n) -{ - return 0; -} -#endif - /** * phy_module_driver() - Helper macro for registering PHY drivers |