diff options
Diffstat (limited to 'include/linux/platform_data/cros_ec_commands.h')
| -rw-r--r-- | include/linux/platform_data/cros_ec_commands.h | 116 |
1 files changed, 107 insertions, 9 deletions
diff --git a/include/linux/platform_data/cros_ec_commands.h b/include/linux/platform_data/cros_ec_commands.h index 69210881ebac..1fcfe9e63cb9 100644 --- a/include/linux/platform_data/cros_ec_commands.h +++ b/include/linux/platform_data/cros_ec_commands.h @@ -4917,15 +4917,26 @@ struct ec_response_usb_pd_control_v1 { #define USBC_PD_CC_UFP_ATTACHED 4 /* UFP attached to usbc */ #define USBC_PD_CC_DFP_ATTACHED 5 /* DPF attached to usbc */ +/* Active/Passive Cable */ +#define USB_PD_CTRL_ACTIVE_CABLE BIT(0) +/* Optical/Non-optical cable */ +#define USB_PD_CTRL_OPTICAL_CABLE BIT(1) +/* 3rd Gen TBT device (or AMA)/2nd gen tbt Adapter */ +#define USB_PD_CTRL_TBT_LEGACY_ADAPTER BIT(2) +/* Active Link Uni-Direction */ +#define USB_PD_CTRL_ACTIVE_LINK_UNIDIR BIT(3) + struct ec_response_usb_pd_control_v2 { uint8_t enabled; uint8_t role; uint8_t polarity; char state[32]; - uint8_t cc_state; /* USBC_PD_CC_*Encoded cc state */ - uint8_t dp_mode; /* Current DP pin mode (MODE_DP_PIN_[A-E]) */ - /* CL:1500994 Current cable type */ - uint8_t reserved_cable_type; + uint8_t cc_state; /* enum pd_cc_states representing cc state */ + uint8_t dp_mode; /* Current DP pin mode (MODE_DP_PIN_[A-E]) */ + uint8_t reserved; /* Reserved for future use */ + uint8_t control_flags; /* USB_PD_CTRL_*flags */ + uint8_t cable_speed; /* TBT_SS_* cable speed */ + uint8_t cable_gen; /* TBT_GEN3_* cable rounded support */ } __ec_align1; #define EC_CMD_USB_PD_PORTS 0x0102 @@ -5207,11 +5218,15 @@ struct ec_params_usb_pd_mux_info { } __ec_align1; /* Flags representing mux state */ -#define USB_PD_MUX_USB_ENABLED BIT(0) /* USB connected */ -#define USB_PD_MUX_DP_ENABLED BIT(1) /* DP connected */ -#define USB_PD_MUX_POLARITY_INVERTED BIT(2) /* CC line Polarity inverted */ -#define USB_PD_MUX_HPD_IRQ BIT(3) /* HPD IRQ is asserted */ -#define USB_PD_MUX_HPD_LVL BIT(4) /* HPD level is asserted */ +#define USB_PD_MUX_NONE 0 /* Open switch */ +#define USB_PD_MUX_USB_ENABLED BIT(0) /* USB connected */ +#define USB_PD_MUX_DP_ENABLED BIT(1) /* DP connected */ +#define USB_PD_MUX_POLARITY_INVERTED BIT(2) /* CC line Polarity inverted */ +#define USB_PD_MUX_HPD_IRQ BIT(3) /* HPD IRQ is asserted */ +#define USB_PD_MUX_HPD_LVL BIT(4) /* HPD level is asserted */ +#define USB_PD_MUX_SAFE_MODE BIT(5) /* DP is in safe mode */ +#define USB_PD_MUX_TBT_COMPAT_ENABLED BIT(6) /* TBT compat enabled */ +#define USB_PD_MUX_USB4_ENABLED BIT(7) /* USB4 enabled */ struct ec_response_usb_pd_mux_info { uint8_t flags; /* USB_PD_MUX_*-encoded USB mux state */ @@ -5431,6 +5446,89 @@ struct ec_response_rollback_info { #define EC_CMD_AP_RESET 0x0125 /*****************************************************************************/ +/* Voltage regulator controls */ + +/* + * Get basic info of voltage regulator for given index. + * + * Returns the regulator name and supported voltage list in mV. + */ +#define EC_CMD_REGULATOR_GET_INFO 0x012C + +/* Maximum length of regulator name */ +#define EC_REGULATOR_NAME_MAX_LEN 16 + +/* Maximum length of the supported voltage list. */ +#define EC_REGULATOR_VOLTAGE_MAX_COUNT 16 + +struct ec_params_regulator_get_info { + uint32_t index; +} __ec_align4; + +struct ec_response_regulator_get_info { + char name[EC_REGULATOR_NAME_MAX_LEN]; + uint16_t num_voltages; + uint16_t voltages_mv[EC_REGULATOR_VOLTAGE_MAX_COUNT]; +} __ec_align2; + +/* + * Configure the regulator as enabled / disabled. + */ +#define EC_CMD_REGULATOR_ENABLE 0x012D + +struct ec_params_regulator_enable { + uint32_t index; + uint8_t enable; +} __ec_align4; + +/* + * Query if the regulator is enabled. + * + * Returns 1 if the regulator is enabled, 0 if not. + */ +#define EC_CMD_REGULATOR_IS_ENABLED 0x012E + +struct ec_params_regulator_is_enabled { + uint32_t index; +} __ec_align4; + +struct ec_response_regulator_is_enabled { + uint8_t enabled; +} __ec_align1; + +/* + * Set voltage for the voltage regulator within the range specified. + * + * The driver should select the voltage in range closest to min_mv. + * + * Also note that this might be called before the regulator is enabled, and the + * setting should be in effect after the regulator is enabled. + */ +#define EC_CMD_REGULATOR_SET_VOLTAGE 0x012F + +struct ec_params_regulator_set_voltage { + uint32_t index; + uint32_t min_mv; + uint32_t max_mv; +} __ec_align4; + +/* + * Get the currently configured voltage for the voltage regulator. + * + * Note that this might be called before the regulator is enabled, and this + * should return the configured output voltage if the regulator is enabled. + */ +#define EC_CMD_REGULATOR_GET_VOLTAGE 0x0130 + +struct ec_params_regulator_get_voltage { + uint32_t index; +} __ec_align4; + +struct ec_response_regulator_get_voltage { + uint32_t voltage_mv; +} __ec_align4; + +/*****************************************************************************/ /* The command range 0x200-0x2FF is reserved for Rotor. */ /*****************************************************************************/ |