diff options
Diffstat (limited to 'include/linux/spi/spi-mem.h')
| -rw-r--r-- | include/linux/spi/spi-mem.h | 64 |
1 files changed, 62 insertions, 2 deletions
diff --git a/include/linux/spi/spi-mem.h b/include/linux/spi/spi-mem.h index f866d5c8ed32..c4830dfaff3d 100644 --- a/include/linux/spi/spi-mem.h +++ b/include/linux/spi/spi-mem.h @@ -15,16 +15,32 @@ #define SPI_MEM_OP_CMD(__opcode, __buswidth) \ { \ + .nbytes = 1, \ .buswidth = __buswidth, \ .opcode = __opcode, \ + } + +#define SPI_MEM_DTR_OP_CMD(__opcode, __buswidth) \ + { \ .nbytes = 1, \ + .opcode = __opcode, \ + .buswidth = __buswidth, \ + .dtr = true, \ } #define SPI_MEM_OP_ADDR(__nbytes, __val, __buswidth) \ { \ .nbytes = __nbytes, \ + .buswidth = __buswidth, \ + .val = __val, \ + } + +#define SPI_MEM_DTR_OP_ADDR(__nbytes, __val, __buswidth) \ + { \ + .nbytes = __nbytes, \ .val = __val, \ .buswidth = __buswidth, \ + .dtr = true, \ } #define SPI_MEM_OP_NO_ADDR { } @@ -35,22 +51,47 @@ .buswidth = __buswidth, \ } +#define SPI_MEM_DTR_OP_DUMMY(__nbytes, __buswidth) \ + { \ + .nbytes = __nbytes, \ + .buswidth = __buswidth, \ + .dtr = true, \ + } + #define SPI_MEM_OP_NO_DUMMY { } #define SPI_MEM_OP_DATA_IN(__nbytes, __buf, __buswidth) \ { \ + .buswidth = __buswidth, \ + .dir = SPI_MEM_DATA_IN, \ + .nbytes = __nbytes, \ + .buf.in = __buf, \ + } + +#define SPI_MEM_DTR_OP_DATA_IN(__nbytes, __buf, __buswidth) \ + { \ .dir = SPI_MEM_DATA_IN, \ .nbytes = __nbytes, \ .buf.in = __buf, \ .buswidth = __buswidth, \ + .dtr = true, \ } #define SPI_MEM_OP_DATA_OUT(__nbytes, __buf, __buswidth) \ { \ + .buswidth = __buswidth, \ + .dir = SPI_MEM_DATA_OUT, \ + .nbytes = __nbytes, \ + .buf.out = __buf, \ + } + +#define SPI_MEM_DTR_OP_DATA_OUT(__nbytes, __buf, __buswidth) \ + { \ .dir = SPI_MEM_DATA_OUT, \ .nbytes = __nbytes, \ .buf.out = __buf, \ .buswidth = __buswidth, \ + .dtr = true, \ } #define SPI_MEM_OP_NO_DATA { } @@ -68,6 +109,9 @@ enum spi_mem_data_dir { SPI_MEM_DATA_OUT, }; +#define SPI_MEM_OP_MAX_FREQ(__freq) \ + .max_freq = __freq + /** * struct spi_mem_op - describes a SPI memory operation * @cmd.nbytes: number of opcode bytes (only 1 or 2 are valid). The opcode is @@ -90,11 +134,16 @@ enum spi_mem_data_dir { * @data.buswidth: number of IO lanes used to send/receive the data * @data.dtr: whether the data should be sent in DTR mode or not * @data.ecc: whether error correction is required or not + * @data.swap16: whether the byte order of 16-bit words is swapped when read + * or written in Octal DTR mode compared to STR mode. * @data.dir: direction of the transfer * @data.nbytes: number of data bytes to send/receive. Can be zero if the * operation does not involve transferring data * @data.buf.in: input buffer (must be DMA-able) * @data.buf.out: output buffer (must be DMA-able) + * @max_freq: frequency limitation wrt this operation. 0 means there is no + * specific constraint and the highest achievable frequency can be + * attempted. */ struct spi_mem_op { struct { @@ -124,7 +173,8 @@ struct spi_mem_op { u8 buswidth; u8 dtr : 1; u8 ecc : 1; - u8 __pad : 6; + u8 swap16 : 1; + u8 __pad : 5; enum spi_mem_data_dir dir; unsigned int nbytes; union { @@ -132,14 +182,17 @@ struct spi_mem_op { const void *out; } buf; } data; + + unsigned int max_freq; }; -#define SPI_MEM_OP(__cmd, __addr, __dummy, __data) \ +#define SPI_MEM_OP(__cmd, __addr, __dummy, __data, ...) \ { \ .cmd = __cmd, \ .addr = __addr, \ .dummy = __dummy, \ .data = __data, \ + __VA_ARGS__ \ } /** @@ -297,10 +350,15 @@ struct spi_controller_mem_ops { * struct spi_controller_mem_caps - SPI memory controller capabilities * @dtr: Supports DTR operations * @ecc: Supports operations with error correction + * @swap16: Supports swapping bytes on a 16 bit boundary when configured in + * Octal DTR + * @per_op_freq: Supports per operation frequency switching */ struct spi_controller_mem_caps { bool dtr; bool ecc; + bool swap16; + bool per_op_freq; }; #define spi_mem_controller_is_capable(ctlr, cap) \ @@ -365,6 +423,8 @@ bool spi_mem_default_supports_op(struct spi_mem *mem, #endif /* CONFIG_SPI_MEM */ int spi_mem_adjust_op_size(struct spi_mem *mem, struct spi_mem_op *op); +void spi_mem_adjust_op_freq(struct spi_mem *mem, struct spi_mem_op *op); +u64 spi_mem_calc_op_duration(struct spi_mem_op *op); bool spi_mem_supports_op(struct spi_mem *mem, const struct spi_mem_op *op); |