diff options
Diffstat (limited to 'include/linux/usb/gadget.h')
| -rw-r--r-- | include/linux/usb/gadget.h | 91 |
1 files changed, 73 insertions, 18 deletions
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index e7351d64f11f..df33333650a0 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -10,13 +10,12 @@ * * (C) Copyright 2002-2004 by David Brownell * All Rights Reserved. - * - * This software is licensed under the GNU GPL version 2. */ #ifndef __LINUX_USB_GADGET_H #define __LINUX_USB_GADGET_H +#include <linux/configfs.h> #include <linux/device.h> #include <linux/errno.h> #include <linux/init.h> @@ -53,6 +52,7 @@ struct usb_ep; * @short_not_ok: When reading data, makes short packets be * treated as errors (queue stops advancing till cleanup). * @dma_mapped: Indicates if request has been mapped to DMA (internal) + * @sg_was_mapped: Set if the scatterlist has been mapped before the request * @complete: Function called when request completes, so this request and * its buffer may be re-used. The function will always be called with * interrupts disabled, and it must not sleep. @@ -112,6 +112,7 @@ struct usb_request { unsigned zero:1; unsigned short_not_ok:1; unsigned dma_mapped:1; + unsigned sg_was_mapped:1; void (*complete)(struct usb_ep *ep, struct usb_request *req); @@ -197,7 +198,7 @@ struct usb_ep_caps { * @name:identifier for the endpoint, such as "ep-a" or "ep9in-bulk" * @ops: Function pointers used to access hardware-specific operations. * @ep_list:the gadget's ep_list holds all of its endpoints - * @caps:The structure describing types and directions supported by endoint. + * @caps:The structure describing types and directions supported by endpoint. * @enabled: The current endpoint enabled/disabled state. * @claimed: True if this endpoint is claimed by a function. * @maxpacket:The maximum packet size used on this endpoint. The initial @@ -228,18 +229,18 @@ struct usb_ep { const char *name; const struct usb_ep_ops *ops; + const struct usb_endpoint_descriptor *desc; + const struct usb_ss_ep_comp_descriptor *comp_desc; struct list_head ep_list; struct usb_ep_caps caps; bool claimed; bool enabled; - unsigned maxpacket:16; - unsigned maxpacket_limit:16; - unsigned max_streams:16; unsigned mult:2; unsigned maxburst:5; u8 address; - const struct usb_endpoint_descriptor *desc; - const struct usb_ss_ep_comp_descriptor *comp_desc; + u16 maxpacket; + u16 maxpacket_limit; + u16 max_streams; }; /*-------------------------------------------------------------------------*/ @@ -311,6 +312,8 @@ struct usb_udc; struct usb_gadget_ops { int (*get_frame)(struct usb_gadget *); int (*wakeup)(struct usb_gadget *); + int (*func_wakeup)(struct usb_gadget *gadget, int intf_id); + int (*set_remote_wakeup)(struct usb_gadget *, int set); int (*set_selfpowered) (struct usb_gadget *, int is_selfpowered); int (*vbus_session) (struct usb_gadget *, int is_active); int (*vbus_draw) (struct usb_gadget *, unsigned mA); @@ -323,9 +326,13 @@ struct usb_gadget_ops { struct usb_gadget_driver *); int (*udc_stop)(struct usb_gadget *); void (*udc_set_speed)(struct usb_gadget *, enum usb_device_speed); + void (*udc_set_ssp_rate)(struct usb_gadget *gadget, + enum usb_ssp_rate rate); + void (*udc_async_callbacks)(struct usb_gadget *gadget, bool enable); struct usb_ep *(*match_ep)(struct usb_gadget *, struct usb_endpoint_descriptor *, struct usb_ss_ep_comp_descriptor *); + int (*check_config)(struct usb_gadget *gadget); }; /** @@ -339,6 +346,10 @@ struct usb_gadget_ops { * @speed: Speed of current connection to USB host. * @max_speed: Maximal speed the UDC can handle. UDC must support this * and all slower speeds. + * @ssp_rate: Current connected SuperSpeed Plus signaling rate and lane count. + * @max_ssp_rate: Maximum SuperSpeed Plus signaling rate and lane count the UDC + * can handle. The UDC must support this and all slower speeds and lower + * number of lanes. * @state: the state we are now (attached, suspended, configured, etc) * @name: Identifies the controller hardware type. Used in diagnostics * and sometimes configuration. @@ -377,7 +388,10 @@ struct usb_gadget_ops { * @connected: True if gadget is connected. * @lpm_capable: If the gadget max_speed is FULL or HIGH, this flag * indicates that it supports LPM as per the LPM ECN & errata. + * @wakeup_capable: True if gadget is capable of sending remote wakeup. + * @wakeup_armed: True if gadget is armed by the host for remote wakeup. * @irq: the interrupt number for device controller. + * @id_number: a unique ID number for ensuring that gadget names are distinct * * Gadgets have a mostly-portable "gadget driver" implementing device * functions, handling all usb configurations and interfaces. Gadget @@ -406,6 +420,11 @@ struct usb_gadget { struct list_head ep_list; /* of usb_ep */ enum usb_device_speed speed; enum usb_device_speed max_speed; + + /* USB SuperSpeed Plus only */ + enum usb_ssp_rate ssp_rate; + enum usb_ssp_rate max_ssp_rate; + enum usb_device_state state; const char *name; struct device dev; @@ -432,7 +451,10 @@ struct usb_gadget { unsigned deactivated:1; unsigned connected:1; unsigned lpm_capable:1; + unsigned wakeup_capable:1; + unsigned wakeup_armed:1; int irq; + int id_number; }; #define work_to_gadget(w) (container_of((w), struct usb_gadget, work)) @@ -479,7 +501,7 @@ extern char *usb_get_gadget_udc_name(void); */ static inline size_t usb_ep_align(struct usb_ep *ep, size_t len) { - int max_packet_size = (size_t)usb_endpoint_maxp(ep->desc) & 0x7ff; + int max_packet_size = (size_t)usb_endpoint_maxp(ep->desc); return round_up(len, max_packet_size); } @@ -587,6 +609,7 @@ static inline int gadget_is_otg(struct usb_gadget *g) #if IS_ENABLED(CONFIG_USB_GADGET) int usb_gadget_frame_number(struct usb_gadget *gadget); int usb_gadget_wakeup(struct usb_gadget *gadget); +int usb_gadget_set_remote_wakeup(struct usb_gadget *gadget, int set); int usb_gadget_set_selfpowered(struct usb_gadget *gadget); int usb_gadget_clear_selfpowered(struct usb_gadget *gadget); int usb_gadget_vbus_connect(struct usb_gadget *gadget); @@ -596,11 +619,14 @@ int usb_gadget_connect(struct usb_gadget *gadget); int usb_gadget_disconnect(struct usb_gadget *gadget); int usb_gadget_deactivate(struct usb_gadget *gadget); int usb_gadget_activate(struct usb_gadget *gadget); +int usb_gadget_check_config(struct usb_gadget *gadget); #else static inline int usb_gadget_frame_number(struct usb_gadget *gadget) { return 0; } static inline int usb_gadget_wakeup(struct usb_gadget *gadget) { return 0; } +static inline int usb_gadget_set_remote_wakeup(struct usb_gadget *gadget, int set) +{ return 0; } static inline int usb_gadget_set_selfpowered(struct usb_gadget *gadget) { return 0; } static inline int usb_gadget_clear_selfpowered(struct usb_gadget *gadget) @@ -619,6 +645,8 @@ static inline int usb_gadget_deactivate(struct usb_gadget *gadget) { return 0; } static inline int usb_gadget_activate(struct usb_gadget *gadget) { return 0; } +static inline int usb_gadget_check_config(struct usb_gadget *gadget) +{ return 0; } #endif /* CONFIG_USB_GADGET */ /*-------------------------------------------------------------------------*/ @@ -648,9 +676,9 @@ static inline int usb_gadget_activate(struct usb_gadget *gadget) * @driver: Driver model state for this driver. * @udc_name: A name of UDC this driver should be bound to. If udc_name is NULL, * this driver will be bound to any available UDC. - * @pending: UDC core private data used for deferred probe of this driver. - * @match_existing_only: If udc is not found, return an error and don't add this - * gadget driver to list of pending driver + * @match_existing_only: If udc is not found, return an error and fail + * the driver registration + * @is_bound: Allow a driver to be bound to only one gadget * * Devices are disabled till a gadget driver successfully bind()s, which * means the driver will handle setup() requests needed to enumerate (and @@ -685,6 +713,15 @@ static inline int usb_gadget_activate(struct usb_gadget *gadget) * get_interface. Setting a configuration (or interface) is where * endpoints should be activated or (config 0) shut down. * + * The gadget driver's setup() callback does not have to queue a response to + * ep0 within the setup() call, the driver can do it after setup() returns. + * The UDC driver must wait until such a response is queued before proceeding + * with the data/status stages of the control transfer. + * + * NOTE: Currently, a number of UDC drivers rely on USB_GADGET_DELAYED_STATUS + * being returned from the setup() callback, which is a bug. See the comment + * next to USB_GADGET_DELAYED_STATUS for details. + * * (Note that only the default control endpoint is supported. Neither * hosts nor devices generally support control traffic except to ep0.) * @@ -713,8 +750,8 @@ struct usb_gadget_driver { struct device_driver driver; char *udc_name; - struct list_head pending; unsigned match_existing_only:1; + bool is_bound:1; }; @@ -724,22 +761,30 @@ struct usb_gadget_driver { /* driver modules register and unregister, as usual. * these calls must be made in a context that can sleep. * - * these will usually be implemented directly by the hardware-dependent - * usb bus interface driver, which will only support a single driver. + * A gadget driver can be bound to only one gadget at a time. */ /** - * usb_gadget_probe_driver - probe a gadget driver + * usb_gadget_register_driver_owner - register a gadget driver * @driver: the driver being registered + * @owner: the driver module + * @mod_name: the driver module's build name * Context: can sleep * * Call this in your gadget driver's module initialization function, - * to tell the underlying usb controller driver about your driver. + * to tell the underlying UDC controller driver about your driver. * The @bind() function will be called to bind it to a gadget before this * registration call returns. It's expected that the @bind() function will * be in init sections. + * + * Use the macro defined below instead of calling this directly. */ -int usb_gadget_probe_driver(struct usb_gadget_driver *driver); +int usb_gadget_register_driver_owner(struct usb_gadget_driver *driver, + struct module *owner, const char *mod_name); + +/* use a define to avoid include chaining to get THIS_MODULE & friends */ +#define usb_gadget_register_driver(driver) \ + usb_gadget_register_driver_owner(driver, THIS_MODULE, KBUILD_MODNAME) /** * usb_gadget_unregister_driver - unregister a gadget driver @@ -797,6 +842,16 @@ int usb_gadget_get_string(const struct usb_gadget_strings *table, int id, u8 *bu /* check if the given language identifier is valid */ bool usb_validate_langid(u16 langid); +struct gadget_string { + struct config_item item; + struct list_head list; + char string[USB_MAX_STRING_LEN]; + struct usb_string usb_string; +}; + +#define to_gadget_string(str_item)\ +container_of(str_item, struct gadget_string, item) + /*-------------------------------------------------------------------------*/ /* utility to simplify managing config descriptors */ |