diff options
Diffstat (limited to 'include/linux/usb/hcd.h')
| -rw-r--r-- | include/linux/usb/hcd.h | 77 |
1 files changed, 47 insertions, 30 deletions
diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h index 3dbb42c637c1..ac95e7c89df5 100644 --- a/include/linux/usb/hcd.h +++ b/include/linux/usb/hcd.h @@ -1,20 +1,6 @@ // SPDX-License-Identifier: GPL-2.0+ /* * Copyright (c) 2001-2002 by David Brownell - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY - * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software Foundation, - * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #ifndef __USB_CORE_HCD_H @@ -59,16 +45,17 @@ * USB Host Controller Driver (usb_hcd) framework * * Since "struct usb_bus" is so thin, you can't share much code in it. - * This framework is a layer over that, and should be more sharable. + * This framework is a layer over that, and should be more shareable. */ /*-------------------------------------------------------------------------*/ struct giveback_urb_bh { bool running; + bool high_prio; spinlock_t lock; struct list_head head; - struct tasklet_struct bh; + struct work_struct bh; struct usb_host_endpoint *completing_ep; }; @@ -124,6 +111,7 @@ struct usb_hcd { #define HCD_FLAG_RH_RUNNING 5 /* root hub is running? */ #define HCD_FLAG_DEAD 6 /* controller has died? */ #define HCD_FLAG_INTF_AUTHORIZED 7 /* authorize interfaces? */ +#define HCD_FLAG_DEFER_RH_REGISTER 8 /* Defer roothub registration */ /* The flags can be tested using these macros; they are likely to * be slightly faster than test_bit(). @@ -134,6 +122,7 @@ struct usb_hcd { #define HCD_WAKEUP_PENDING(hcd) ((hcd)->flags & (1U << HCD_FLAG_WAKEUP_PENDING)) #define HCD_RH_RUNNING(hcd) ((hcd)->flags & (1U << HCD_FLAG_RH_RUNNING)) #define HCD_DEAD(hcd) ((hcd)->flags & (1U << HCD_FLAG_DEAD)) +#define HCD_DEFER_RH_REGISTER(hcd) ((hcd)->flags & (1U << HCD_FLAG_DEFER_RH_REGISTER)) /* * Specifies if interfaces are authorized by default @@ -165,7 +154,6 @@ struct usb_hcd { /* The next flag is a stopgap, to be removed when all the HCDs * support the new root-hub polling mechanism. */ unsigned uses_new_polling:1; - unsigned wireless:1; /* Wireless USB HCD */ unsigned has_tt:1; /* Integrated TT in root hub */ unsigned amd_resume_bug:1; /* AMD remote wakeup quirk */ unsigned can_do_streams:1; /* HC supports streams */ @@ -260,7 +248,6 @@ struct hc_driver { #define HCD_SHARED 0x0004 /* Two (or more) usb_hcds share HW */ #define HCD_USB11 0x0010 /* USB 1.1 */ #define HCD_USB2 0x0020 /* USB 2.0 */ -#define HCD_USB25 0x0030 /* Wireless USB 1.0 (USB 2.5)*/ #define HCD_USB3 0x0040 /* USB 3.0 */ #define HCD_USB31 0x0050 /* USB 3.1 */ #define HCD_USB32 0x0060 /* USB 3.2 */ @@ -278,7 +265,10 @@ struct hc_driver { int (*pci_suspend)(struct usb_hcd *hcd, bool do_wakeup); /* called after entering D0 (etc), before resuming the hub */ - int (*pci_resume)(struct usb_hcd *hcd, bool hibernated); + int (*pci_resume)(struct usb_hcd *hcd, pm_message_t state); + + /* called just before hibernate final D3 state, allows host to poweroff parts */ + int (*pci_poweroff_late)(struct usb_hcd *hcd, bool do_wakeup); /* cleanly make HCD stop writing memory and doing I/O */ void (*stop) (struct usb_hcd *hcd); @@ -299,7 +289,7 @@ struct hc_driver { * (optional) these hooks allow an HCD to override the default DMA * mapping and unmapping routines. In general, they shouldn't be * necessary unless the host controller has special DMA requirements, - * such as alignment contraints. If these are not specified, the + * such as alignment constraints. If these are not specified, the * general usb_hcd_(un)?map_urb_for_dma functions will be used instead * (and it may be a good idea to call these functions in your HCD * implementation) @@ -382,8 +372,9 @@ struct hc_driver { * or bandwidth constraints. */ void (*reset_bandwidth)(struct usb_hcd *, struct usb_device *); - /* Returns the hardware-chosen device address */ - int (*address_device)(struct usb_hcd *, struct usb_device *udev); + /* Set the hardware-chosen device address */ + int (*address_device)(struct usb_hcd *, struct usb_device *udev, + unsigned int timeout_ms); /* prepares the hardware to send commands to the device */ int (*enable_device)(struct usb_hcd *, struct usb_device *udev); /* Notifies the HCD after a hub descriptor is fetched. @@ -409,7 +400,10 @@ struct hc_driver { int (*find_raw_port_number)(struct usb_hcd *, int); /* Call for power on/off the port if necessary */ int (*port_power)(struct usb_hcd *hcd, int portnum, bool enable); - + /* Call for SINGLE_STEP_SET_FEATURE Test for USB2 EH certification */ +#define EHSET_TEST_SINGLE_STEP_SET_FEATURE 0x06 + int (*submit_single_step_set_feature)(struct usb_hcd *, + struct urb *, int); }; static inline int hcd_giveback_urb_in_bh(struct usb_hcd *hcd) @@ -474,21 +468,43 @@ int usb_hcd_setup_local_mem(struct usb_hcd *hcd, phys_addr_t phys_addr, struct platform_device; extern void usb_hcd_platform_shutdown(struct platform_device *dev); +#ifdef CONFIG_USB_HCD_TEST_MODE +extern int ehset_single_step_set_feature(struct usb_hcd *hcd, int port); +#else +static inline int ehset_single_step_set_feature(struct usb_hcd *hcd, int port) +{ + return 0; +} +#endif /* CONFIG_USB_HCD_TEST_MODE */ #ifdef CONFIG_USB_PCI struct pci_dev; struct pci_device_id; extern int usb_hcd_pci_probe(struct pci_dev *dev, - const struct pci_device_id *id, const struct hc_driver *driver); extern void usb_hcd_pci_remove(struct pci_dev *dev); extern void usb_hcd_pci_shutdown(struct pci_dev *dev); +#ifdef CONFIG_USB_PCI_AMD extern int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *dev); -#ifdef CONFIG_PM -extern const struct dev_pm_ops usb_hcd_pci_pm_ops; +static inline bool usb_hcd_amd_resume_bug(struct pci_dev *dev, + const struct hc_driver *driver) +{ + if (!usb_hcd_amd_remote_wakeup_quirk(dev)) + return false; + if (driver->flags & (HCD_USB11 | HCD_USB3)) + return true; + return false; +} +#else /* CONFIG_USB_PCI_AMD */ +static inline bool usb_hcd_amd_resume_bug(struct pci_dev *dev, + const struct hc_driver *driver) +{ + return false; +} #endif +extern const struct dev_pm_ops usb_hcd_pci_pm_ops; #endif /* CONFIG_USB_PCI */ /* pci-ish (pdev null is ok) buffer alloc/mapping support */ @@ -501,6 +517,11 @@ void *hcd_buffer_alloc(struct usb_bus *bus, size_t size, void hcd_buffer_free(struct usb_bus *bus, size_t size, void *addr, dma_addr_t dma); +void *hcd_buffer_alloc_pages(struct usb_hcd *hcd, + size_t size, gfp_t mem_flags, dma_addr_t *dma); +void hcd_buffer_free_pages(struct usb_hcd *hcd, + size_t size, void *addr, dma_addr_t dma); + /* generic bus glue, needed for host controllers that don't use PCI */ extern irqreturn_t usb_hcd_irq(int irq, void *__hcd); @@ -734,10 +755,6 @@ static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb, /* random stuff */ -#define RUN_CONTEXT (in_irq() ? "in_irq" \ - : (in_interrupt() ? "in_interrupt" : "can sleep")) - - /* This rwsem is for use only by the hub driver and ehci-hcd. * Nobody else should touch it. */ |