diff options
Diffstat (limited to 'include/media/v4l2-subdev.h')
| -rw-r--r-- | include/media/v4l2-subdev.h | 1119 |
1 files changed, 981 insertions, 138 deletions
diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h index 1de960bfcab9..57f2bcb4eb16 100644 --- a/include/media/v4l2-subdev.h +++ b/include/media/v4l2-subdev.h @@ -38,6 +38,7 @@ struct v4l2_subdev; struct v4l2_subdev_fh; struct tuner_setup; struct v4l2_mbus_frame_desc; +struct led_classdev; /** * struct v4l2_decode_vbi_line - used to decode_vbi_line @@ -162,6 +163,9 @@ struct v4l2_subdev_io_pin_config { * @s_gpio: set GPIO pins. Very simple right now, might need to be extended with * a direction argument if needed. * + * @command: called by in-kernel drivers in order to call functions internal + * to subdev drivers driver that have a separate callback. + * * @ioctl: called at the end of ioctl() syscall handler at the V4L2 core. * used to provide support for private ioctls used on the driver. * @@ -173,7 +177,10 @@ struct v4l2_subdev_io_pin_config { * @s_register: callback for VIDIOC_DBG_S_REGISTER() ioctl handler code. * * @s_power: puts subdevice in power saving mode (on == 0) or normal operation - * mode (on == 1). + * mode (on == 1). DEPRECATED. See + * Documentation/driver-api/media/camera-sensor.rst . pre_streamon and + * post_streamoff callbacks can be used for e.g. setting the bus to LP-11 + * mode before s_stream is called. * * @interrupt_service_routine: Called by the bridge chip's interrupt service * handler, when an interrupt status has be raised due to this subdev, @@ -193,6 +200,7 @@ struct v4l2_subdev_core_ops { int (*load_fw)(struct v4l2_subdev *sd); int (*reset)(struct v4l2_subdev *sd, u32 val); int (*s_gpio)(struct v4l2_subdev *sd, u32 val); + long (*command)(struct v4l2_subdev *sd, unsigned int cmd, void *arg); long (*ioctl)(struct v4l2_subdev *sd, unsigned int cmd, void *arg); #ifdef CONFIG_COMPAT long (*compat_ioctl32)(struct v4l2_subdev *sd, unsigned int cmd, @@ -309,7 +317,18 @@ struct v4l2_subdev_audio_ops { }; /** - * enum v4l2_mbus_frame_desc_entry - media bus frame description flags + * struct v4l2_mbus_frame_desc_entry_csi2 + * + * @vc: CSI-2 virtual channel + * @dt: CSI-2 data type ID + */ +struct v4l2_mbus_frame_desc_entry_csi2 { + u8 vc; + u8 dt; +}; + +/** + * enum v4l2_mbus_frame_desc_flags - media bus frame description flags * * @V4L2_MBUS_FRAME_DESC_FL_LEN_MAX: * Indicates that &struct v4l2_mbus_frame_desc_entry->length field @@ -327,30 +346,71 @@ enum v4l2_mbus_frame_desc_flags { * struct v4l2_mbus_frame_desc_entry - media bus frame description structure * * @flags: bitmask flags, as defined by &enum v4l2_mbus_frame_desc_flags. + * @stream: stream in routing configuration * @pixelcode: media bus pixel code, valid if @flags * %FRAME_DESC_FL_BLOB is not set. * @length: number of octets per frame, valid if @flags * %V4L2_MBUS_FRAME_DESC_FL_LEN_MAX is set. + * @bus: Bus-specific frame descriptor parameters + * @bus.csi2: CSI-2-specific bus configuration */ struct v4l2_mbus_frame_desc_entry { enum v4l2_mbus_frame_desc_flags flags; + u32 stream; u32 pixelcode; u32 length; + union { + struct v4l2_mbus_frame_desc_entry_csi2 csi2; + } bus; }; -#define V4L2_FRAME_DESC_ENTRY_MAX 4 + /* + * If this number is too small, it should be dropped altogether and the + * API switched to a dynamic number of frame descriptor entries. + */ +#define V4L2_FRAME_DESC_ENTRY_MAX 8 + +/** + * enum v4l2_mbus_frame_desc_type - media bus frame description type + * + * @V4L2_MBUS_FRAME_DESC_TYPE_UNDEFINED: + * Undefined frame desc type. Drivers should not use this, it is + * for backwards compatibility. + * @V4L2_MBUS_FRAME_DESC_TYPE_PARALLEL: + * Parallel media bus. + * @V4L2_MBUS_FRAME_DESC_TYPE_CSI2: + * CSI-2 media bus. Frame desc parameters must be set in + * &struct v4l2_mbus_frame_desc_entry->csi2. + */ +enum v4l2_mbus_frame_desc_type { + V4L2_MBUS_FRAME_DESC_TYPE_UNDEFINED = 0, + V4L2_MBUS_FRAME_DESC_TYPE_PARALLEL, + V4L2_MBUS_FRAME_DESC_TYPE_CSI2, +}; /** * struct v4l2_mbus_frame_desc - media bus data frame description + * @type: type of the bus (enum v4l2_mbus_frame_desc_type) * @entry: frame descriptors array * @num_entries: number of entries in @entry array */ struct v4l2_mbus_frame_desc { + enum v4l2_mbus_frame_desc_type type; struct v4l2_mbus_frame_desc_entry entry[V4L2_FRAME_DESC_ENTRY_MAX]; unsigned short num_entries; }; /** + * enum v4l2_subdev_pre_streamon_flags - Flags for pre_streamon subdev core op + * + * @V4L2_SUBDEV_PRE_STREAMON_FL_MANUAL_LP: Set the transmitter to either LP-11 + * or LP-111 mode before call to s_stream(). + */ +enum v4l2_subdev_pre_streamon_flags { + V4L2_SUBDEV_PRE_STREAMON_FL_MANUAL_LP = BIT(0), +}; + +/** * struct v4l2_subdev_video_ops - Callbacks used when v4l device was opened * in video mode. * @@ -383,28 +443,41 @@ struct v4l2_mbus_frame_desc { * @g_input_status: get input status. Same as the status field in the * &struct v4l2_input * - * @s_stream: used to notify the driver that a video stream will start or has - * stopped. - * - * @g_pixelaspect: callback to return the pixelaspect ratio. - * - * @g_frame_interval: callback for VIDIOC_SUBDEV_G_FRAME_INTERVAL() - * ioctl handler code. + * @s_stream: start (enabled == 1) or stop (enabled == 0) streaming on the + * sub-device. Failure on stop will remove any resources acquired in + * streaming start, while the error code is still returned by the driver. + * The caller shall track the subdev state, and shall not start or stop an + * already started or stopped subdev. Also see call_s_stream wrapper in + * v4l2-subdev.c. * - * @s_frame_interval: callback for VIDIOC_SUBDEV_S_FRAME_INTERVAL() - * ioctl handler code. + * This callback is DEPRECATED. New drivers should instead implement + * &v4l2_subdev_pad_ops.enable_streams and + * &v4l2_subdev_pad_ops.disable_streams operations, and use + * v4l2_subdev_s_stream_helper for the &v4l2_subdev_video_ops.s_stream + * operation to support legacy users. * - * @s_dv_timings: Set custom dv timings in the sub device. This is used - * when sub device is capable of setting detailed timing information - * in the hardware to generate/detect the video signal. - * - * @g_dv_timings: Get custom dv timings in the sub device. + * Drivers should also not call the .s_stream() subdev operation directly, + * but use the v4l2_subdev_enable_streams() and + * v4l2_subdev_disable_streams() helpers. * - * @query_dv_timings: callback for VIDIOC_QUERY_DV_TIMINGS() ioctl handler code. + * @g_pixelaspect: callback to return the pixelaspect ratio. * * @s_rx_buffer: set a host allocated memory buffer for the subdev. The subdev * can adjust @size to a lower value and must not write more data to the * buffer starting at @data than the original value of @size. + * + * @pre_streamon: May be called before streaming is actually started, to help + * initialising the bus. Current usage is to set a CSI-2 transmitter to + * LP-11 or LP-111 mode before streaming. See &enum + * v4l2_subdev_pre_streamon_flags. + * + * pre_streamon shall return error if it cannot perform the operation as + * indicated by the flags argument. In particular, -EACCES indicates lack + * of support for the operation. The caller shall call post_streamoff for + * each successful call of pre_streamon. + * + * @post_streamoff: Called after streaming is stopped, but if and only if + * pre_streamon was called earlier. */ struct v4l2_subdev_video_ops { int (*s_routing)(struct v4l2_subdev *sd, u32 input, u32 output, u32 config); @@ -419,18 +492,10 @@ struct v4l2_subdev_video_ops { int (*g_input_status)(struct v4l2_subdev *sd, u32 *status); int (*s_stream)(struct v4l2_subdev *sd, int enable); int (*g_pixelaspect)(struct v4l2_subdev *sd, struct v4l2_fract *aspect); - int (*g_frame_interval)(struct v4l2_subdev *sd, - struct v4l2_subdev_frame_interval *interval); - int (*s_frame_interval)(struct v4l2_subdev *sd, - struct v4l2_subdev_frame_interval *interval); - int (*s_dv_timings)(struct v4l2_subdev *sd, - struct v4l2_dv_timings *timings); - int (*g_dv_timings)(struct v4l2_subdev *sd, - struct v4l2_dv_timings *timings); - int (*query_dv_timings)(struct v4l2_subdev *sd, - struct v4l2_dv_timings *timings); int (*s_rx_buffer)(struct v4l2_subdev *sd, void *buf, unsigned int *size); + int (*pre_streamon)(struct v4l2_subdev *sd, u32 flags); + int (*post_streamoff)(struct v4l2_subdev *sd); }; /** @@ -609,24 +674,95 @@ struct v4l2_subdev_ir_ops { /** * struct v4l2_subdev_pad_config - Used for storing subdev pad information. * - * @try_fmt: &struct v4l2_mbus_framefmt - * @try_crop: &struct v4l2_rect to be used for crop - * @try_compose: &struct v4l2_rect to be used for compose + * @format: &struct v4l2_mbus_framefmt + * @crop: &struct v4l2_rect to be used for crop + * @compose: &struct v4l2_rect to be used for compose + * @interval: frame interval + */ +struct v4l2_subdev_pad_config { + struct v4l2_mbus_framefmt format; + struct v4l2_rect crop; + struct v4l2_rect compose; + struct v4l2_fract interval; +}; + +/** + * struct v4l2_subdev_stream_config - Used for storing stream configuration. + * + * @pad: pad number + * @stream: stream number + * @enabled: has the stream been enabled with v4l2_subdev_enable_streams() + * @fmt: &struct v4l2_mbus_framefmt + * @crop: &struct v4l2_rect to be used for crop + * @compose: &struct v4l2_rect to be used for compose + * @interval: frame interval + * + * This structure stores configuration for a stream. + */ +struct v4l2_subdev_stream_config { + u32 pad; + u32 stream; + bool enabled; + + struct v4l2_mbus_framefmt fmt; + struct v4l2_rect crop; + struct v4l2_rect compose; + struct v4l2_fract interval; +}; + +/** + * struct v4l2_subdev_stream_configs - A collection of stream configs. + * + * @num_configs: number of entries in @config. + * @configs: an array of &struct v4l2_subdev_stream_configs. + */ +struct v4l2_subdev_stream_configs { + u32 num_configs; + struct v4l2_subdev_stream_config *configs; +}; + +/** + * struct v4l2_subdev_krouting - subdev routing table + * + * @len_routes: length of routes array, in routes + * @num_routes: number of routes + * @routes: &struct v4l2_subdev_route + * + * This structure contains the routing table for a subdev. + */ +struct v4l2_subdev_krouting { + unsigned int len_routes; + unsigned int num_routes; + struct v4l2_subdev_route *routes; +}; + +/** + * struct v4l2_subdev_state - Used for storing subdev state information. + * + * @_lock: default for 'lock' + * @lock: mutex for the state. May be replaced by the user. + * @sd: the sub-device which the state is related to + * @pads: &struct v4l2_subdev_pad_config array + * @routing: routing table for the subdev + * @stream_configs: stream configurations (only for V4L2_SUBDEV_FL_STREAMS) * * This structure only needs to be passed to the pad op if the 'which' field * of the main argument is set to %V4L2_SUBDEV_FORMAT_TRY. For * %V4L2_SUBDEV_FORMAT_ACTIVE it is safe to pass %NULL. */ -struct v4l2_subdev_pad_config { - struct v4l2_mbus_framefmt try_fmt; - struct v4l2_rect try_crop; - struct v4l2_rect try_compose; +struct v4l2_subdev_state { + /* lock for the struct v4l2_subdev_state fields */ + struct mutex _lock; + struct mutex *lock; + struct v4l2_subdev *sd; + struct v4l2_subdev_pad_config *pads; + struct v4l2_subdev_krouting routing; + struct v4l2_subdev_stream_configs stream_configs; }; /** * struct v4l2_subdev_pad_ops - v4l2-subdev pad level operations * - * @init_cfg: initialize the pad config to default values * @enum_mbus_code: callback for VIDIOC_SUBDEV_ENUM_MBUS_CODE() ioctl handler * code. * @enum_frame_size: callback for VIDIOC_SUBDEV_ENUM_FRAME_SIZE() ioctl handler @@ -643,10 +779,24 @@ struct v4l2_subdev_pad_config { * * @set_selection: callback for VIDIOC_SUBDEV_S_SELECTION() ioctl handler code. * + * @get_frame_interval: callback for VIDIOC_SUBDEV_G_FRAME_INTERVAL() + * ioctl handler code. + * + * @set_frame_interval: callback for VIDIOC_SUBDEV_S_FRAME_INTERVAL() + * ioctl handler code. + * * @get_edid: callback for VIDIOC_SUBDEV_G_EDID() ioctl handler code. * * @set_edid: callback for VIDIOC_SUBDEV_S_EDID() ioctl handler code. * + * @s_dv_timings: Set custom dv timings in the sub device. This is used + * when sub device is capable of setting detailed timing information + * in the hardware to generate/detect the video signal. + * + * @g_dv_timings: Get custom dv timings in the sub device. + * + * @query_dv_timings: callback for VIDIOC_QUERY_DV_TIMINGS() ioctl handler code. + * * @dv_timings_cap: callback for VIDIOC_SUBDEV_DV_TIMINGS_CAP() ioctl handler * code. * @@ -672,45 +822,70 @@ struct v4l2_subdev_pad_config { * possible configuration from the remote end, likely calling * this operation as close as possible to stream on time. The * operation shall fail if the pad index it has been called on - * is not valid or in case of unrecoverable failures. - * - * @set_mbus_config: set the media bus configuration of a remote sub-device. - * This operations is intended to allow, in combination with - * the get_mbus_config operation, the negotiation of media bus - * configuration parameters between media sub-devices. The - * operation shall not fail if the requested configuration is - * not supported, but the driver shall update the content of - * the %config argument to reflect what has been actually - * applied to the hardware. The operation shall fail if the - * pad index it has been called on is not valid or in case of - * unrecoverable failures. + * is not valid or in case of unrecoverable failures. The + * config argument has been memset to 0 just before calling + * the op. + * + * @set_routing: Enable or disable data connection routes described in the + * subdevice routing table. Subdevs that implement this operation + * must set the V4L2_SUBDEV_FL_STREAMS flag. + * + * @enable_streams: Enable the streams defined in streams_mask on the given + * source pad. Subdevs that implement this operation must use the active + * state management provided by the subdev core (enabled through a call to + * v4l2_subdev_init_finalize() at initialization time). Do not call + * directly, use v4l2_subdev_enable_streams() instead. + * + * Drivers that support only a single stream without setting the + * V4L2_SUBDEV_CAP_STREAMS sub-device capability flag can ignore the mask + * argument. + * + * @disable_streams: Disable the streams defined in streams_mask on the given + * source pad. Subdevs that implement this operation must use the active + * state management provided by the subdev core (enabled through a call to + * v4l2_subdev_init_finalize() at initialization time). Do not call + * directly, use v4l2_subdev_disable_streams() instead. + * + * Drivers that support only a single stream without setting the + * V4L2_SUBDEV_CAP_STREAMS sub-device capability flag can ignore the mask + * argument. */ struct v4l2_subdev_pad_ops { - int (*init_cfg)(struct v4l2_subdev *sd, - struct v4l2_subdev_pad_config *cfg); int (*enum_mbus_code)(struct v4l2_subdev *sd, - struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_state *state, struct v4l2_subdev_mbus_code_enum *code); int (*enum_frame_size)(struct v4l2_subdev *sd, - struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_state *state, struct v4l2_subdev_frame_size_enum *fse); int (*enum_frame_interval)(struct v4l2_subdev *sd, - struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_state *state, struct v4l2_subdev_frame_interval_enum *fie); int (*get_fmt)(struct v4l2_subdev *sd, - struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_state *state, struct v4l2_subdev_format *format); int (*set_fmt)(struct v4l2_subdev *sd, - struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_state *state, struct v4l2_subdev_format *format); int (*get_selection)(struct v4l2_subdev *sd, - struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_state *state, struct v4l2_subdev_selection *sel); int (*set_selection)(struct v4l2_subdev *sd, - struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_state *state, struct v4l2_subdev_selection *sel); + int (*get_frame_interval)(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, + struct v4l2_subdev_frame_interval *interval); + int (*set_frame_interval)(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, + struct v4l2_subdev_frame_interval *interval); int (*get_edid)(struct v4l2_subdev *sd, struct v4l2_edid *edid); int (*set_edid)(struct v4l2_subdev *sd, struct v4l2_edid *edid); + int (*s_dv_timings)(struct v4l2_subdev *sd, unsigned int pad, + struct v4l2_dv_timings *timings); + int (*g_dv_timings)(struct v4l2_subdev *sd, unsigned int pad, + struct v4l2_dv_timings *timings); + int (*query_dv_timings)(struct v4l2_subdev *sd, unsigned int pad, + struct v4l2_dv_timings *timings); int (*dv_timings_cap)(struct v4l2_subdev *sd, struct v4l2_dv_timings_cap *cap); int (*enum_dv_timings)(struct v4l2_subdev *sd, @@ -726,8 +901,16 @@ struct v4l2_subdev_pad_ops { struct v4l2_mbus_frame_desc *fd); int (*get_mbus_config)(struct v4l2_subdev *sd, unsigned int pad, struct v4l2_mbus_config *config); - int (*set_mbus_config)(struct v4l2_subdev *sd, unsigned int pad, - struct v4l2_mbus_config *config); + int (*set_routing)(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, + enum v4l2_subdev_format_whence which, + struct v4l2_subdev_krouting *route); + int (*enable_streams)(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, u32 pad, + u64 streams_mask); + int (*disable_streams)(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, u32 pad, + u64 streams_mask); }; /** @@ -756,6 +939,8 @@ struct v4l2_subdev_ops { /** * struct v4l2_subdev_internal_ops - V4L2 subdev internal ops * + * @init_state: initialize the subdev state to default values + * * @registered: called when this subdev is registered. When called the v4l2_dev * field is set to the correct v4l2_device. * @@ -781,6 +966,8 @@ struct v4l2_subdev_ops { * these ops. */ struct v4l2_subdev_internal_ops { + int (*init_state)(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state); int (*registered)(struct v4l2_subdev *sd); void (*unregistered)(struct v4l2_subdev *sd); int (*open)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh); @@ -788,8 +975,6 @@ struct v4l2_subdev_internal_ops { void (*release)(struct v4l2_subdev *sd); }; -#define V4L2_SUBDEV_NAME_SIZE 32 - /* Set this flag if this subdev is a i2c device. */ #define V4L2_SUBDEV_FL_IS_I2C (1U << 0) /* Set this flag if this subdev is a spi device. */ @@ -802,6 +987,17 @@ struct v4l2_subdev_internal_ops { * should set this flag. */ #define V4L2_SUBDEV_FL_HAS_EVENTS (1U << 3) +/* + * Set this flag if this subdev supports multiplexed streams. This means + * that the driver supports routing and handles the stream parameter in its + * v4l2_subdev_pad_ops handlers. More specifically, this means: + * + * - Centrally managed subdev active state is enabled + * - Legacy pad config is _not_ supported (state->pads is NULL) + * - Routing ioctls are available + * - Multiple streams per pad are supported + */ +#define V4L2_SUBDEV_FL_STREAMS (1U << 4) struct regulator_bulk_data; @@ -849,13 +1045,27 @@ struct v4l2_subdev_platform_data { * @dev: pointer to the physical device, if any * @fwnode: The fwnode_handle of the subdev, usually the same as * either dev->of_node->fwnode or dev->fwnode (whichever is non-NULL). - * @async_list: Links this subdev to a global subdev_list or @notifier->done - * list. - * @asd: Pointer to respective &struct v4l2_async_subdev. - * @notifier: Pointer to the managing notifier. + * @async_list: Links this subdev to a global subdev_list or + * @notifier->done_list list. + * @async_subdev_endpoint_list: List entry in async_subdev_endpoint_entry of + * &struct v4l2_async_subdev_endpoint. * @subdev_notifier: A sub-device notifier implicitly registered for the sub- - * device using v4l2_device_register_sensor_subdev(). + * device using v4l2_async_register_subdev_sensor(). + * @asc_list: Async connection list, of &struct + * v4l2_async_connection.subdev_entry. * @pdata: common part of subdevice platform data + * @state_lock: A pointer to a lock used for all the subdev's states, set by the + * driver. This is optional. If NULL, each state instance will get + * a lock of its own. + * @privacy_led: Optional pointer to a LED classdev for the privacy LED for sensors. + * @active_state: Active state for the subdev (NULL for subdevs tracking the + * state internally). Initialized by calling + * v4l2_subdev_init_finalize(). + * @enabled_pads: Bitmask of enabled pads used by v4l2_subdev_enable_streams() + * and v4l2_subdev_disable_streams() helper functions for + * fallback cases. + * @s_stream_enabled: Tracks whether streaming has been enabled with s_stream. + * This is only for call_s_stream() internal use. * * Each instance of a subdev driver should create this struct, either * stand-alone or embedded in a larger struct. @@ -875,7 +1085,7 @@ struct v4l2_subdev { const struct v4l2_subdev_ops *ops; const struct v4l2_subdev_internal_ops *internal_ops; struct v4l2_ctrl_handler *ctrl_handler; - char name[V4L2_SUBDEV_NAME_SIZE]; + char name[52]; u32 grp_id; void *dev_priv; void *host_priv; @@ -883,10 +1093,28 @@ struct v4l2_subdev { struct device *dev; struct fwnode_handle *fwnode; struct list_head async_list; - struct v4l2_async_subdev *asd; - struct v4l2_async_notifier *notifier; + struct list_head async_subdev_endpoint_list; struct v4l2_async_notifier *subdev_notifier; + struct list_head asc_list; struct v4l2_subdev_platform_data *pdata; + struct mutex *state_lock; + + /* + * The fields below are private, and should only be accessed via + * appropriate functions. + */ + + struct led_classdev *privacy_led; + + /* + * TODO: active_state should most likely be changed from a pointer to an + * embedded field. For the time being it's kept as a pointer to more + * easily catch uses of active_state in the cases where the driver + * doesn't support it. + */ + struct v4l2_subdev_state *active_state; + u64 enabled_pads; + bool s_stream_enabled; }; @@ -918,14 +1146,16 @@ struct v4l2_subdev { * struct v4l2_subdev_fh - Used for storing subdev information per file handle * * @vfh: pointer to &struct v4l2_fh - * @pad: pointer to &struct v4l2_subdev_pad_config + * @state: pointer to &struct v4l2_subdev_state * @owner: module pointer to the owner of this file handle + * @client_caps: bitmask of ``V4L2_SUBDEV_CLIENT_CAP_*`` */ struct v4l2_subdev_fh { struct v4l2_fh vfh; struct module *owner; #if defined(CONFIG_VIDEO_V4L2_SUBDEV_API) - struct v4l2_subdev_pad_config *pad; + struct v4l2_subdev_state *state; + u64 client_caps; #endif }; @@ -938,64 +1168,6 @@ struct v4l2_subdev_fh { #define to_v4l2_subdev_fh(fh) \ container_of(fh, struct v4l2_subdev_fh, vfh) -#if defined(CONFIG_VIDEO_V4L2_SUBDEV_API) - -/** - * v4l2_subdev_get_try_format - ancillary routine to call - * &struct v4l2_subdev_pad_config->try_fmt - * - * @sd: pointer to &struct v4l2_subdev - * @cfg: pointer to &struct v4l2_subdev_pad_config array. - * @pad: index of the pad in the @cfg array. - */ -static inline struct v4l2_mbus_framefmt * -v4l2_subdev_get_try_format(struct v4l2_subdev *sd, - struct v4l2_subdev_pad_config *cfg, - unsigned int pad) -{ - if (WARN_ON(pad >= sd->entity.num_pads)) - pad = 0; - return &cfg[pad].try_fmt; -} - -/** - * v4l2_subdev_get_try_crop - ancillary routine to call - * &struct v4l2_subdev_pad_config->try_crop - * - * @sd: pointer to &struct v4l2_subdev - * @cfg: pointer to &struct v4l2_subdev_pad_config array. - * @pad: index of the pad in the @cfg array. - */ -static inline struct v4l2_rect * -v4l2_subdev_get_try_crop(struct v4l2_subdev *sd, - struct v4l2_subdev_pad_config *cfg, - unsigned int pad) -{ - if (WARN_ON(pad >= sd->entity.num_pads)) - pad = 0; - return &cfg[pad].try_crop; -} - -/** - * v4l2_subdev_get_try_compose - ancillary routine to call - * &struct v4l2_subdev_pad_config->try_compose - * - * @sd: pointer to &struct v4l2_subdev - * @cfg: pointer to &struct v4l2_subdev_pad_config array. - * @pad: index of the pad in the @cfg array. - */ -static inline struct v4l2_rect * -v4l2_subdev_get_try_compose(struct v4l2_subdev *sd, - struct v4l2_subdev_pad_config *cfg, - unsigned int pad) -{ - if (WARN_ON(pad >= sd->entity.num_pads)) - pad = 0; - return &cfg[pad].try_compose; -} - -#endif - extern const struct v4l2_file_operations v4l2_subdev_fops; /** @@ -1089,27 +1261,621 @@ int v4l2_subdev_link_validate_default(struct v4l2_subdev *sd, * calls v4l2_subdev_link_validate_default() to ensure that * width, height and the media bus pixel code are equal on both * source and sink of the link. + * + * The function can be used as a drop-in &media_entity_ops.link_validate + * implementation for v4l2_subdev instances. It supports all links between + * subdevs, as well as links between subdevs and video devices, provided that + * the video devices also implement their &media_entity_ops.link_validate + * operation. */ int v4l2_subdev_link_validate(struct media_link *link); /** - * v4l2_subdev_alloc_pad_config - Allocates memory for pad config + * v4l2_subdev_has_pad_interdep - MC has_pad_interdep implementation for subdevs + * + * @entity: pointer to &struct media_entity + * @pad0: pad number for the first pad + * @pad1: pad number for the second pad + * + * This function is an implementation of the + * media_entity_operations.has_pad_interdep operation for subdevs that + * implement the multiplexed streams API (as indicated by the + * V4L2_SUBDEV_FL_STREAMS subdev flag). + * + * It considers two pads interdependent if there is an active route between pad0 + * and pad1. + */ +bool v4l2_subdev_has_pad_interdep(struct media_entity *entity, + unsigned int pad0, unsigned int pad1); + +/** + * __v4l2_subdev_state_alloc - allocate v4l2_subdev_state + * + * @sd: pointer to &struct v4l2_subdev for which the state is being allocated. + * @lock_name: name of the state lock + * @key: lock_class_key for the lock + * + * Must call __v4l2_subdev_state_free() when state is no longer needed. + * + * Not to be called directly by the drivers. + */ +struct v4l2_subdev_state *__v4l2_subdev_state_alloc(struct v4l2_subdev *sd, + const char *lock_name, + struct lock_class_key *key); + +/** + * __v4l2_subdev_state_free - free a v4l2_subdev_state + * + * @state: v4l2_subdev_state to be freed. + * + * Not to be called directly by the drivers. + */ +void __v4l2_subdev_state_free(struct v4l2_subdev_state *state); + +/** + * v4l2_subdev_init_finalize() - Finalizes the initialization of the subdevice + * @sd: The subdev * - * @sd: pointer to struct v4l2_subdev + * This function finalizes the initialization of the subdev, including + * allocation of the active state for the subdev. + * + * This function must be called by the subdev drivers that use the centralized + * active state, after the subdev struct has been initialized and + * media_entity_pads_init() has been called, but before registering the + * subdev. + * + * The user must call v4l2_subdev_cleanup() when the subdev is being removed. */ -struct -v4l2_subdev_pad_config *v4l2_subdev_alloc_pad_config(struct v4l2_subdev *sd); +#define v4l2_subdev_init_finalize(sd) \ + ({ \ + static struct lock_class_key __key; \ + const char *name = KBUILD_BASENAME \ + ":" __stringify(__LINE__) ":sd->active_state->lock"; \ + __v4l2_subdev_init_finalize(sd, name, &__key); \ + }) + +int __v4l2_subdev_init_finalize(struct v4l2_subdev *sd, const char *name, + struct lock_class_key *key); /** - * v4l2_subdev_free_pad_config - Frees memory allocated by - * v4l2_subdev_alloc_pad_config(). + * v4l2_subdev_cleanup() - Releases the resources allocated by the subdevice + * @sd: The subdevice * - * @cfg: pointer to &struct v4l2_subdev_pad_config + * Clean up a V4L2 async sub-device. Must be called for a sub-device as part of + * its release if resources have been associated with it using + * v4l2_async_subdev_endpoint_add() or v4l2_subdev_init_finalize(). + */ +void v4l2_subdev_cleanup(struct v4l2_subdev *sd); + +/* + * A macro to generate the macro or function name for sub-devices state access + * wrapper macros below. + */ +#define __v4l2_subdev_state_gen_call(NAME, _1, ARG, ...) \ + __v4l2_subdev_state_get_ ## NAME ## ARG + +/* + * A macro to constify the return value of the state accessors when the state + * parameter is const. */ -void v4l2_subdev_free_pad_config(struct v4l2_subdev_pad_config *cfg); +#define __v4l2_subdev_state_constify_ret(state, value) \ + _Generic(state, \ + const struct v4l2_subdev_state *: (const typeof(*(value)) *)(value), \ + struct v4l2_subdev_state *: (value) \ + ) + +/** + * v4l2_subdev_state_get_format() - Get pointer to a stream format + * @state: subdevice state + * @pad: pad id + * @...: stream id (optional argument) + * + * This returns a pointer to &struct v4l2_mbus_framefmt for the given pad + + * stream in the subdev state. + * + * For stream-unaware drivers the format for the corresponding pad is returned. + * If the pad does not exist, NULL is returned. + */ +/* + * Wrap v4l2_subdev_state_get_format(), allowing the function to be called with + * two or three arguments. The purpose of the __v4l2_subdev_state_gen_call() + * macro is to come up with the name of the function or macro to call, using + * the last two arguments (_stream and _pad). The selected function or macro is + * then called using the arguments specified by the caller. The + * __v4l2_subdev_state_constify_ret() macro constifies the returned pointer + * when the state is const, allowing the state accessors to guarantee + * const-correctness in all cases. + * + * A similar arrangement is used for v4l2_subdev_state_crop(), + * v4l2_subdev_state_compose() and v4l2_subdev_state_get_interval() below. + */ +#define v4l2_subdev_state_get_format(state, pad, ...) \ + __v4l2_subdev_state_constify_ret(state, \ + __v4l2_subdev_state_gen_call(format, ##__VA_ARGS__, , _pad) \ + ((struct v4l2_subdev_state *)state, pad, ##__VA_ARGS__)) +#define __v4l2_subdev_state_get_format_pad(state, pad) \ + __v4l2_subdev_state_get_format(state, pad, 0) +struct v4l2_mbus_framefmt * +__v4l2_subdev_state_get_format(struct v4l2_subdev_state *state, + unsigned int pad, u32 stream); + +/** + * v4l2_subdev_state_get_crop() - Get pointer to a stream crop rectangle + * @state: subdevice state + * @pad: pad id + * @...: stream id (optional argument) + * + * This returns a pointer to crop rectangle for the given pad + stream in the + * subdev state. + * + * For stream-unaware drivers the crop rectangle for the corresponding pad is + * returned. If the pad does not exist, NULL is returned. + */ +#define v4l2_subdev_state_get_crop(state, pad, ...) \ + __v4l2_subdev_state_constify_ret(state, \ + __v4l2_subdev_state_gen_call(crop, ##__VA_ARGS__, , _pad) \ + ((struct v4l2_subdev_state *)state, pad, ##__VA_ARGS__)) +#define __v4l2_subdev_state_get_crop_pad(state, pad) \ + __v4l2_subdev_state_get_crop(state, pad, 0) +struct v4l2_rect * +__v4l2_subdev_state_get_crop(struct v4l2_subdev_state *state, unsigned int pad, + u32 stream); + +/** + * v4l2_subdev_state_get_compose() - Get pointer to a stream compose rectangle + * @state: subdevice state + * @pad: pad id + * @...: stream id (optional argument) + * + * This returns a pointer to compose rectangle for the given pad + stream in the + * subdev state. + * + * For stream-unaware drivers the compose rectangle for the corresponding pad is + * returned. If the pad does not exist, NULL is returned. + */ +#define v4l2_subdev_state_get_compose(state, pad, ...) \ + __v4l2_subdev_state_constify_ret(state, \ + __v4l2_subdev_state_gen_call(compose, ##__VA_ARGS__, , _pad) \ + ((struct v4l2_subdev_state *)state, pad, ##__VA_ARGS__)) +#define __v4l2_subdev_state_get_compose_pad(state, pad) \ + __v4l2_subdev_state_get_compose(state, pad, 0) +struct v4l2_rect * +__v4l2_subdev_state_get_compose(struct v4l2_subdev_state *state, + unsigned int pad, u32 stream); + +/** + * v4l2_subdev_state_get_interval() - Get pointer to a stream frame interval + * @state: subdevice state + * @pad: pad id + * @...: stream id (optional argument) + * + * This returns a pointer to the frame interval for the given pad + stream in + * the subdev state. + * + * For stream-unaware drivers the frame interval for the corresponding pad is + * returned. If the pad does not exist, NULL is returned. + */ +#define v4l2_subdev_state_get_interval(state, pad, ...) \ + __v4l2_subdev_state_constify_ret(state, \ + __v4l2_subdev_state_gen_call(interval, ##__VA_ARGS__, , _pad) \ + ((struct v4l2_subdev_state *)state, pad, ##__VA_ARGS__)) +#define __v4l2_subdev_state_get_interval_pad(state, pad) \ + __v4l2_subdev_state_get_interval(state, pad, 0) +struct v4l2_fract * +__v4l2_subdev_state_get_interval(struct v4l2_subdev_state *state, + unsigned int pad, u32 stream); + +#if defined(CONFIG_VIDEO_V4L2_SUBDEV_API) + +/** + * v4l2_subdev_get_fmt() - Fill format based on state + * @sd: subdevice + * @state: subdevice state + * @format: pointer to &struct v4l2_subdev_format + * + * Fill @format->format field based on the information in the @format struct. + * + * This function can be used by the subdev drivers which support active state to + * implement v4l2_subdev_pad_ops.get_fmt if the subdev driver does not need to + * do anything special in their get_fmt op. + * + * Returns 0 on success, error value otherwise. + */ +int v4l2_subdev_get_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_state *state, + struct v4l2_subdev_format *format); + +/** + * v4l2_subdev_get_frame_interval() - Fill frame interval based on state + * @sd: subdevice + * @state: subdevice state + * @fi: pointer to &struct v4l2_subdev_frame_interval + * + * Fill @fi->interval field based on the information in the @fi struct. + * + * This function can be used by the subdev drivers which support active state to + * implement v4l2_subdev_pad_ops.get_frame_interval if the subdev driver does + * not need to do anything special in their get_frame_interval op. + * + * Returns 0 on success, error value otherwise. + */ +int v4l2_subdev_get_frame_interval(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, + struct v4l2_subdev_frame_interval *fi); + +/** + * v4l2_subdev_set_routing() - Set given routing to subdev state + * @sd: The subdevice + * @state: The subdevice state + * @routing: Routing that will be copied to subdev state + * + * This will release old routing table (if any) from the state, allocate + * enough space for the given routing, and copy the routing. + * + * This can be used from the subdev driver's set_routing op, after validating + * the routing. + */ +int v4l2_subdev_set_routing(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, + const struct v4l2_subdev_krouting *routing); + +struct v4l2_subdev_route * +__v4l2_subdev_next_active_route(const struct v4l2_subdev_krouting *routing, + struct v4l2_subdev_route *route); + +/** + * for_each_active_route - iterate on all active routes of a routing table + * @routing: The routing table + * @route: The route iterator + */ +#define for_each_active_route(routing, route) \ + for ((route) = NULL; \ + ((route) = __v4l2_subdev_next_active_route((routing), (route)));) + +/** + * v4l2_subdev_set_routing_with_fmt() - Set given routing and format to subdev + * state + * @sd: The subdevice + * @state: The subdevice state + * @routing: Routing that will be copied to subdev state + * @fmt: Format used to initialize all the streams + * + * This is the same as v4l2_subdev_set_routing, but additionally initializes + * all the streams using the given format. + */ +int v4l2_subdev_set_routing_with_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, + const struct v4l2_subdev_krouting *routing, + const struct v4l2_mbus_framefmt *fmt); + +/** + * v4l2_subdev_routing_find_opposite_end() - Find the opposite stream + * @routing: routing used to find the opposite side + * @pad: pad id + * @stream: stream id + * @other_pad: pointer used to return the opposite pad + * @other_stream: pointer used to return the opposite stream + * + * This function uses the routing table to find the pad + stream which is + * opposite the given pad + stream. + * + * @other_pad and/or @other_stream can be NULL if the caller does not need the + * value. + * + * Returns 0 on success, or -EINVAL if no matching route is found. + */ +int v4l2_subdev_routing_find_opposite_end(const struct v4l2_subdev_krouting *routing, + u32 pad, u32 stream, u32 *other_pad, + u32 *other_stream); + +/** + * v4l2_subdev_state_get_opposite_stream_format() - Get pointer to opposite + * stream format + * @state: subdevice state + * @pad: pad id + * @stream: stream id + * + * This returns a pointer to &struct v4l2_mbus_framefmt for the pad + stream + * that is opposite the given pad + stream in the subdev state. + * + * If the state does not contain the given pad + stream, NULL is returned. + */ +struct v4l2_mbus_framefmt * +v4l2_subdev_state_get_opposite_stream_format(struct v4l2_subdev_state *state, + u32 pad, u32 stream); + +/** + * v4l2_subdev_state_xlate_streams() - Translate streams from one pad to another + * + * @state: Subdevice state + * @pad0: The first pad + * @pad1: The second pad + * @streams: Streams bitmask on the first pad + * + * Streams on sink pads of a subdev are routed to source pads as expressed in + * the subdev state routing table. Stream numbers don't necessarily match on + * the sink and source side of a route. This function translates stream numbers + * on @pad0, expressed as a bitmask in @streams, to the corresponding streams + * on @pad1 using the routing table from the @state. It returns the stream mask + * on @pad1, and updates @streams with the streams that have been found in the + * routing table. + * + * @pad0 and @pad1 must be a sink and a source, in any order. + * + * Return: The bitmask of streams of @pad1 that are routed to @streams on @pad0. + */ +u64 v4l2_subdev_state_xlate_streams(const struct v4l2_subdev_state *state, + u32 pad0, u32 pad1, u64 *streams); + +/** + * enum v4l2_subdev_routing_restriction - Subdevice internal routing restrictions + * + * @V4L2_SUBDEV_ROUTING_NO_1_TO_N: + * an input stream shall not be routed to multiple output streams (stream + * duplication) + * @V4L2_SUBDEV_ROUTING_NO_N_TO_1: + * multiple input streams shall not be routed to the same output stream + * (stream merging) + * @V4L2_SUBDEV_ROUTING_NO_SINK_STREAM_MIX: + * all streams from a sink pad must be routed to a single source pad + * @V4L2_SUBDEV_ROUTING_NO_SOURCE_STREAM_MIX: + * all streams on a source pad must originate from a single sink pad + * @V4L2_SUBDEV_ROUTING_NO_SOURCE_MULTIPLEXING: + * source pads shall not contain multiplexed streams + * @V4L2_SUBDEV_ROUTING_NO_SINK_MULTIPLEXING: + * sink pads shall not contain multiplexed streams + * @V4L2_SUBDEV_ROUTING_ONLY_1_TO_1: + * only non-overlapping 1-to-1 stream routing is allowed (a combination of + * @V4L2_SUBDEV_ROUTING_NO_1_TO_N and @V4L2_SUBDEV_ROUTING_NO_N_TO_1) + * @V4L2_SUBDEV_ROUTING_NO_STREAM_MIX: + * all streams from a sink pad must be routed to a single source pad, and + * that source pad shall not get routes from any other sink pad + * (a combination of @V4L2_SUBDEV_ROUTING_NO_SINK_STREAM_MIX and + * @V4L2_SUBDEV_ROUTING_NO_SOURCE_STREAM_MIX) + * @V4L2_SUBDEV_ROUTING_NO_MULTIPLEXING: + * no multiplexed streams allowed on either source or sink sides. + */ +enum v4l2_subdev_routing_restriction { + V4L2_SUBDEV_ROUTING_NO_1_TO_N = BIT(0), + V4L2_SUBDEV_ROUTING_NO_N_TO_1 = BIT(1), + V4L2_SUBDEV_ROUTING_NO_SINK_STREAM_MIX = BIT(2), + V4L2_SUBDEV_ROUTING_NO_SOURCE_STREAM_MIX = BIT(3), + V4L2_SUBDEV_ROUTING_NO_SINK_MULTIPLEXING = BIT(4), + V4L2_SUBDEV_ROUTING_NO_SOURCE_MULTIPLEXING = BIT(5), + V4L2_SUBDEV_ROUTING_ONLY_1_TO_1 = + V4L2_SUBDEV_ROUTING_NO_1_TO_N | + V4L2_SUBDEV_ROUTING_NO_N_TO_1, + V4L2_SUBDEV_ROUTING_NO_STREAM_MIX = + V4L2_SUBDEV_ROUTING_NO_SINK_STREAM_MIX | + V4L2_SUBDEV_ROUTING_NO_SOURCE_STREAM_MIX, + V4L2_SUBDEV_ROUTING_NO_MULTIPLEXING = + V4L2_SUBDEV_ROUTING_NO_SINK_MULTIPLEXING | + V4L2_SUBDEV_ROUTING_NO_SOURCE_MULTIPLEXING, +}; + +/** + * v4l2_subdev_routing_validate() - Verify that routes comply with driver + * constraints + * @sd: The subdevice + * @routing: Routing to verify + * @disallow: Restrictions on routes + * + * This verifies that the given routing complies with the @disallow constraints. + * + * Returns 0 on success, error value otherwise. + */ +int v4l2_subdev_routing_validate(struct v4l2_subdev *sd, + const struct v4l2_subdev_krouting *routing, + enum v4l2_subdev_routing_restriction disallow); + +/** + * v4l2_subdev_enable_streams() - Enable streams on a pad + * @sd: The subdevice + * @pad: The pad + * @streams_mask: Bitmask of streams to enable + * + * This function enables streams on a source @pad of a subdevice. The pad is + * identified by its index, while the streams are identified by the + * @streams_mask bitmask. This allows enabling multiple streams on a pad at + * once. + * + * Enabling a stream that is already enabled isn't allowed. If @streams_mask + * contains an already enabled stream, this function returns -EALREADY without + * performing any operation. + * + * Per-stream enable is only available for subdevs that implement the + * .enable_streams() and .disable_streams() operations. For other subdevs, this + * function implements a best-effort compatibility by calling the .s_stream() + * operation, limited to subdevs that have a single source pad. + * + * Drivers that are not stream-aware shall set @streams_mask to BIT_ULL(0). + * + * Return: + * * 0: Success + * * -EALREADY: One of the streams in streams_mask is already enabled + * * -EINVAL: The pad index is invalid, or doesn't correspond to a source pad + * * -EOPNOTSUPP: Falling back to the legacy .s_stream() operation is + * impossible because the subdev has multiple source pads + */ +int v4l2_subdev_enable_streams(struct v4l2_subdev *sd, u32 pad, + u64 streams_mask); + +/** + * v4l2_subdev_disable_streams() - Disable streams on a pad + * @sd: The subdevice + * @pad: The pad + * @streams_mask: Bitmask of streams to disable + * + * This function disables streams on a source @pad of a subdevice. The pad is + * identified by its index, while the streams are identified by the + * @streams_mask bitmask. This allows disabling multiple streams on a pad at + * once. + * + * Disabling a streams that is not enabled isn't allowed. If @streams_mask + * contains a disabled stream, this function returns -EALREADY without + * performing any operation. + * + * Per-stream disable is only available for subdevs that implement the + * .enable_streams() and .disable_streams() operations. For other subdevs, this + * function implements a best-effort compatibility by calling the .s_stream() + * operation, limited to subdevs that have a single source pad. + * + * Drivers that are not stream-aware shall set @streams_mask to BIT_ULL(0). + * + * Return: + * * 0: Success + * * -EALREADY: One of the streams in streams_mask is not enabled + * * -EINVAL: The pad index is invalid, or doesn't correspond to a source pad + * * -EOPNOTSUPP: Falling back to the legacy .s_stream() operation is + * impossible because the subdev has multiple source pads + */ +int v4l2_subdev_disable_streams(struct v4l2_subdev *sd, u32 pad, + u64 streams_mask); + +/** + * v4l2_subdev_s_stream_helper() - Helper to implement the subdev s_stream + * operation using enable_streams and disable_streams + * @sd: The subdevice + * @enable: Enable or disable streaming + * + * Subdevice drivers that implement the streams-aware + * &v4l2_subdev_pad_ops.enable_streams and &v4l2_subdev_pad_ops.disable_streams + * operations can use this helper to implement the legacy + * &v4l2_subdev_video_ops.s_stream operation. + * + * This helper can only be used by subdevs that have a single source pad. + * + * Return: 0 on success, or a negative error code otherwise. + */ +int v4l2_subdev_s_stream_helper(struct v4l2_subdev *sd, int enable); + +#endif /* CONFIG_VIDEO_V4L2_SUBDEV_API */ + #endif /* CONFIG_MEDIA_CONTROLLER */ /** + * v4l2_subdev_lock_state() - Locks the subdev state + * @state: The subdevice state + * + * Locks the given subdev state. + * + * The state must be unlocked with v4l2_subdev_unlock_state() after use. + */ +static inline void v4l2_subdev_lock_state(struct v4l2_subdev_state *state) +{ + mutex_lock(state->lock); +} + +/** + * v4l2_subdev_unlock_state() - Unlocks the subdev state + * @state: The subdevice state + * + * Unlocks the given subdev state. + */ +static inline void v4l2_subdev_unlock_state(struct v4l2_subdev_state *state) +{ + mutex_unlock(state->lock); +} + +/** + * v4l2_subdev_lock_states - Lock two sub-device states + * @state1: One subdevice state + * @state2: The other subdevice state + * + * Locks the state of two sub-devices. + * + * The states must be unlocked with v4l2_subdev_unlock_states() after use. + * + * This differs from calling v4l2_subdev_lock_state() on both states so that if + * the states share the same lock, the lock is acquired only once (so no + * deadlock occurs). The caller is responsible for ensuring the locks will + * always be acquired in the same order. + */ +static inline void v4l2_subdev_lock_states(struct v4l2_subdev_state *state1, + struct v4l2_subdev_state *state2) +{ + mutex_lock(state1->lock); + if (state1->lock != state2->lock) + mutex_lock(state2->lock); +} + +/** + * v4l2_subdev_unlock_states() - Unlock two sub-device states + * @state1: One subdevice state + * @state2: The other subdevice state + * + * Unlocks the state of two sub-devices. + * + * This differs from calling v4l2_subdev_unlock_state() on both states so that + * if the states share the same lock, the lock is released only once. + */ +static inline void v4l2_subdev_unlock_states(struct v4l2_subdev_state *state1, + struct v4l2_subdev_state *state2) +{ + mutex_unlock(state1->lock); + if (state1->lock != state2->lock) + mutex_unlock(state2->lock); +} + +/** + * v4l2_subdev_get_unlocked_active_state() - Checks that the active subdev state + * is unlocked and returns it + * @sd: The subdevice + * + * Returns the active state for the subdevice, or NULL if the subdev does not + * support active state. If the state is not NULL, calls + * lockdep_assert_not_held() to issue a warning if the state is locked. + * + * This function is to be used e.g. when getting the active state for the sole + * purpose of passing it forward, without accessing the state fields. + */ +static inline struct v4l2_subdev_state * +v4l2_subdev_get_unlocked_active_state(struct v4l2_subdev *sd) +{ + if (sd->active_state) + lockdep_assert_not_held(sd->active_state->lock); + return sd->active_state; +} + +/** + * v4l2_subdev_get_locked_active_state() - Checks that the active subdev state + * is locked and returns it + * + * @sd: The subdevice + * + * Returns the active state for the subdevice, or NULL if the subdev does not + * support active state. If the state is not NULL, calls lockdep_assert_held() + * to issue a warning if the state is not locked. + * + * This function is to be used when the caller knows that the active state is + * already locked. + */ +static inline struct v4l2_subdev_state * +v4l2_subdev_get_locked_active_state(struct v4l2_subdev *sd) +{ + if (sd->active_state) + lockdep_assert_held(sd->active_state->lock); + return sd->active_state; +} + +/** + * v4l2_subdev_lock_and_get_active_state() - Locks and returns the active subdev + * state for the subdevice + * @sd: The subdevice + * + * Returns the locked active state for the subdevice, or NULL if the subdev + * does not support active state. + * + * The state must be unlocked with v4l2_subdev_unlock_state() after use. + */ +static inline struct v4l2_subdev_state * +v4l2_subdev_lock_and_get_active_state(struct v4l2_subdev *sd) +{ + if (sd->active_state) + v4l2_subdev_lock_state(sd->active_state); + return sd->active_state; +} + +/** * v4l2_subdev_init - initializes the sub-device struct * * @sd: pointer to the &struct v4l2_subdev to be initialized @@ -1151,6 +1917,70 @@ extern const struct v4l2_subdev_ops v4l2_subdev_call_wrappers; }) /** + * v4l2_subdev_call_state_active - call an operation of a v4l2_subdev which + * takes state as a parameter, passing the + * subdev its active state. + * + * @sd: pointer to the &struct v4l2_subdev + * @o: name of the element at &struct v4l2_subdev_ops that contains @f. + * Each element there groups a set of callbacks functions. + * @f: callback function to be called. + * The callback functions are defined in groups, according to + * each element at &struct v4l2_subdev_ops. + * @args: arguments for @f. + * + * This is similar to v4l2_subdev_call(), except that this version can only be + * used for ops that take a subdev state as a parameter. The macro will get the + * active state, lock it before calling the op and unlock it after the call. + */ +#define v4l2_subdev_call_state_active(sd, o, f, args...) \ + ({ \ + int __result; \ + struct v4l2_subdev_state *state; \ + state = v4l2_subdev_get_unlocked_active_state(sd); \ + if (state) \ + v4l2_subdev_lock_state(state); \ + __result = v4l2_subdev_call(sd, o, f, state, ##args); \ + if (state) \ + v4l2_subdev_unlock_state(state); \ + __result; \ + }) + +/** + * v4l2_subdev_call_state_try - call an operation of a v4l2_subdev which + * takes state as a parameter, passing the + * subdev a newly allocated try state. + * + * @sd: pointer to the &struct v4l2_subdev + * @o: name of the element at &struct v4l2_subdev_ops that contains @f. + * Each element there groups a set of callbacks functions. + * @f: callback function to be called. + * The callback functions are defined in groups, according to + * each element at &struct v4l2_subdev_ops. + * @args: arguments for @f. + * + * This is similar to v4l2_subdev_call_state_active(), except that as this + * version allocates a new state, this is only usable for + * V4L2_SUBDEV_FORMAT_TRY use cases. + * + * Note: only legacy non-MC drivers may need this macro. + */ +#define v4l2_subdev_call_state_try(sd, o, f, args...) \ + ({ \ + int __result; \ + static struct lock_class_key __key; \ + const char *name = KBUILD_BASENAME \ + ":" __stringify(__LINE__) ":state->lock"; \ + struct v4l2_subdev_state *state = \ + __v4l2_subdev_state_alloc(sd, name, &__key); \ + v4l2_subdev_lock_state(state); \ + __result = v4l2_subdev_call(sd, o, f, state, ##args); \ + v4l2_subdev_unlock_state(state); \ + __v4l2_subdev_state_free(state); \ + __result; \ + }) + +/** * v4l2_subdev_has_op - Checks if a subdev defines a certain operation. * * @sd: pointer to the &struct v4l2_subdev @@ -1174,4 +2004,17 @@ extern const struct v4l2_subdev_ops v4l2_subdev_call_wrappers; void v4l2_subdev_notify_event(struct v4l2_subdev *sd, const struct v4l2_event *ev); -#endif +/** + * v4l2_subdev_is_streaming() - Returns if the subdevice is streaming + * @sd: The subdevice + * + * v4l2_subdev_is_streaming() tells if the subdevice is currently streaming. + * "Streaming" here means whether .s_stream() or .enable_streams() has been + * successfully called, and the streaming has not yet been disabled. + * + * If the subdevice implements .enable_streams() this function must be called + * while holding the active state lock. + */ +bool v4l2_subdev_is_streaming(struct v4l2_subdev *sd); + +#endif /* _V4L2_SUBDEV_H */ |