diff options
Diffstat (limited to 'include/uapi/linux/can/isotp.h')
| -rw-r--r-- | include/uapi/linux/can/isotp.h | 58 |
1 files changed, 38 insertions, 20 deletions
diff --git a/include/uapi/linux/can/isotp.h b/include/uapi/linux/can/isotp.h index 7793b26aa154..bd990917f7c4 100644 --- a/include/uapi/linux/can/isotp.h +++ b/include/uapi/linux/can/isotp.h @@ -2,7 +2,7 @@ /* * linux/can/isotp.h * - * Definitions for isotp CAN sockets (ISO 15765-2:2016) + * Definitions for ISO 15765-2 CAN transport protocol sockets * * Copyright (c) 2020 Volkswagen Group Electronic Research * All rights reserved. @@ -124,33 +124,31 @@ struct can_isotp_ll_options { /* flags for isotp behaviour */ -#define CAN_ISOTP_LISTEN_MODE 0x001 /* listen only (do not send FC) */ -#define CAN_ISOTP_EXTEND_ADDR 0x002 /* enable extended addressing */ -#define CAN_ISOTP_TX_PADDING 0x004 /* enable CAN frame padding tx path */ -#define CAN_ISOTP_RX_PADDING 0x008 /* enable CAN frame padding rx path */ -#define CAN_ISOTP_CHK_PAD_LEN 0x010 /* check received CAN frame padding */ -#define CAN_ISOTP_CHK_PAD_DATA 0x020 /* check received CAN frame padding */ -#define CAN_ISOTP_HALF_DUPLEX 0x040 /* half duplex error state handling */ -#define CAN_ISOTP_FORCE_TXSTMIN 0x080 /* ignore stmin from received FC */ -#define CAN_ISOTP_FORCE_RXSTMIN 0x100 /* ignore CFs depending on rx stmin */ -#define CAN_ISOTP_RX_EXT_ADDR 0x200 /* different rx extended addressing */ -#define CAN_ISOTP_WAIT_TX_DONE 0x400 /* wait for tx completion */ - - -/* default values */ +#define CAN_ISOTP_LISTEN_MODE 0x0001 /* listen only (do not send FC) */ +#define CAN_ISOTP_EXTEND_ADDR 0x0002 /* enable extended addressing */ +#define CAN_ISOTP_TX_PADDING 0x0004 /* enable CAN frame padding tx path */ +#define CAN_ISOTP_RX_PADDING 0x0008 /* enable CAN frame padding rx path */ +#define CAN_ISOTP_CHK_PAD_LEN 0x0010 /* check received CAN frame padding */ +#define CAN_ISOTP_CHK_PAD_DATA 0x0020 /* check received CAN frame padding */ +#define CAN_ISOTP_HALF_DUPLEX 0x0040 /* half duplex error state handling */ +#define CAN_ISOTP_FORCE_TXSTMIN 0x0080 /* ignore stmin from received FC */ +#define CAN_ISOTP_FORCE_RXSTMIN 0x0100 /* ignore CFs depending on rx stmin */ +#define CAN_ISOTP_RX_EXT_ADDR 0x0200 /* different rx extended addressing */ +#define CAN_ISOTP_WAIT_TX_DONE 0x0400 /* wait for tx completion */ +#define CAN_ISOTP_SF_BROADCAST 0x0800 /* 1-to-N functional addressing */ +#define CAN_ISOTP_CF_BROADCAST 0x1000 /* 1-to-N transmission w/o FC */ +#define CAN_ISOTP_DYN_FC_PARMS 0x2000 /* dynamic FC parameters BS/STmin */ + +/* protocol machine default values */ #define CAN_ISOTP_DEFAULT_FLAGS 0 #define CAN_ISOTP_DEFAULT_EXT_ADDRESS 0x00 #define CAN_ISOTP_DEFAULT_PAD_CONTENT 0xCC /* prevent bit-stuffing */ -#define CAN_ISOTP_DEFAULT_FRAME_TXTIME 0 +#define CAN_ISOTP_DEFAULT_FRAME_TXTIME 50000 /* 50 micro seconds */ #define CAN_ISOTP_DEFAULT_RECV_BS 0 #define CAN_ISOTP_DEFAULT_RECV_STMIN 0x00 #define CAN_ISOTP_DEFAULT_RECV_WFTMAX 0 -#define CAN_ISOTP_DEFAULT_LL_MTU CAN_MTU -#define CAN_ISOTP_DEFAULT_LL_TX_DL CAN_MAX_DLEN -#define CAN_ISOTP_DEFAULT_LL_TX_FLAGS 0 - /* * Remark on CAN_ISOTP_DEFAULT_RECV_* values: * @@ -162,4 +160,24 @@ struct can_isotp_ll_options { * consistency and copied directly into the flow control (FC) frame. */ +/* link layer default values => make use of Classical CAN frames */ + +#define CAN_ISOTP_DEFAULT_LL_MTU CAN_MTU +#define CAN_ISOTP_DEFAULT_LL_TX_DL CAN_MAX_DLEN +#define CAN_ISOTP_DEFAULT_LL_TX_FLAGS 0 + +/* + * The CAN_ISOTP_DEFAULT_FRAME_TXTIME has become a non-zero value as + * it only makes sense for isotp implementation tests to run without + * a N_As value. As user space applications usually do not set the + * frame_txtime element of struct can_isotp_options the new in-kernel + * default is very likely overwritten with zero when the sockopt() + * CAN_ISOTP_OPTS is invoked. + * To make sure that a N_As value of zero is only set intentional the + * value '0' is now interpreted as 'do not change the current value'. + * When a frame_txtime of zero is required for testing purposes this + * CAN_ISOTP_FRAME_TXTIME_ZERO u32 value has to be set in frame_txtime. + */ +#define CAN_ISOTP_FRAME_TXTIME_ZERO 0xFFFFFFFF + #endif /* !_UAPI_CAN_ISOTP_H */ |