diff options
Diffstat (limited to 'include/uapi/linux/ethtool.h')
| -rw-r--r-- | include/uapi/linux/ethtool.h | 748 |
1 files changed, 659 insertions, 89 deletions
diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h index 9ca87bc73c44..707c1844010c 100644 --- a/include/uapi/linux/ethtool.h +++ b/include/uapi/linux/ethtool.h @@ -14,7 +14,7 @@ #ifndef _UAPI_LINUX_ETHTOOL_H #define _UAPI_LINUX_ETHTOOL_H -#include <linux/kernel.h> +#include <linux/const.h> #include <linux/types.h> #include <linux/if_ether.h> @@ -26,6 +26,14 @@ * have the same layout for 32-bit and 64-bit userland. */ +/* Note on reserved space. + * Reserved fields must not be accessed directly by user space because + * they may be replaced by a different field in the future. They must + * be initialized to zero before making the request, e.g. via memset + * of the entire structure or implicitly by not being set in a structure + * initializer. + */ + /** * struct ethtool_cmd - DEPRECATED, link control and status * This structure is DEPRECATED, please use struct ethtool_link_settings. @@ -67,6 +75,7 @@ * and other link features that the link partner advertised * through autonegotiation; 0 if unknown or not applicable. * Read-only. + * @reserved: Reserved for future use; see the note on reserved space. * * The link speed in Mbps is split between @speed and @speed_hi. Use * the ethtool_cmd_speed() and ethtool_cmd_speed_set() functions to @@ -150,11 +159,14 @@ static inline __u32 ethtool_cmd_speed(const struct ethtool_cmd *ep) * in its bus driver structure (e.g. pci_driver::name). Must * not be an empty string. * @version: Driver version string; may be an empty string - * @fw_version: Firmware version string; may be an empty string - * @erom_version: Expansion ROM version string; may be an empty string + * @fw_version: Firmware version string; driver defined; may be an + * empty string + * @erom_version: Expansion ROM version string; driver defined; may be + * an empty string * @bus_info: Device bus address. This should match the dev_name() * string for the underlying bus device, if there is one. May be * an empty string. + * @reserved2: Reserved for future use; see the note on reserved space. * @n_priv_flags: Number of flags valid for %ETHTOOL_GPFLAGS and * %ETHTOOL_SPFLAGS commands; also the number of strings in the * %ETH_SS_PRIV_FLAGS set @@ -169,10 +181,6 @@ static inline __u32 ethtool_cmd_speed(const struct ethtool_cmd *ep) * * Users can use the %ETHTOOL_GSSET_INFO command to get the number of * strings in any string set (from Linux 2.6.34). - * - * Drivers should set at most @driver, @version, @fw_version and - * @bus_info in their get_drvinfo() implementation. The ethtool - * core fills in the other fields using other driver operations. */ struct ethtool_drvinfo { __u32 cmd; @@ -221,9 +229,10 @@ enum tunable_id { ETHTOOL_RX_COPYBREAK, ETHTOOL_TX_COPYBREAK, ETHTOOL_PFC_PREVENTION_TOUT, /* timeout in msecs */ + ETHTOOL_TX_COPYBREAK_BUF_SIZE, /* * Add your fresh new tunable attribute above and remember to update - * tunable_strings[] in net/core/ethtool.c + * tunable_strings[] in net/ethtool/common.c */ __ETHTOOL_TUNABLE_COUNT, }; @@ -246,7 +255,7 @@ struct ethtool_tunable { __u32 id; __u32 type_id; __u32 len; - void *data[0]; + void *data[]; }; #define DOWNSHIFT_DEV_DEFAULT_COUNT 0xff @@ -287,7 +296,7 @@ enum phy_tunable_id { ETHTOOL_PHY_EDPD, /* * Add your fresh new phy tunable attribute above and remember to update - * phy_tunable_strings[] in net/core/ethtool.c + * phy_tunable_strings[] in net/ethtool/common.c */ __ETHTOOL_PHY_TUNABLE_COUNT, }; @@ -311,7 +320,7 @@ struct ethtool_regs { __u32 cmd; __u32 version; __u32 len; - __u8 data[0]; + __u8 data[]; }; /** @@ -337,7 +346,7 @@ struct ethtool_eeprom { __u32 magic; __u32 offset; __u32 len; - __u8 data[0]; + __u8 data[]; }; /** @@ -356,6 +365,7 @@ struct ethtool_eeprom { * @tx_lpi_timer: Time in microseconds the interface delays prior to asserting * its tx lpi (after reaching 'idle' state). Effective only when eee * was negotiated and tx_lpi_enabled was set. + * @reserved: Reserved for future use; see the note on reserved space. */ struct ethtool_eee { __u32 cmd; @@ -374,6 +384,7 @@ struct ethtool_eee { * @cmd: %ETHTOOL_GMODULEINFO * @type: Standard the module information conforms to %ETH_MODULE_SFF_xxxx * @eeprom_len: Length of the eeprom + * @reserved: Reserved for future use; see the note on reserved space. * * This structure is used to return the information to * properly size memory for a subsequent call to %ETHTOOL_GMODULEEEPROM. @@ -579,9 +590,7 @@ struct ethtool_pauseparam { __u32 tx_pause; }; -/** - * enum ethtool_link_ext_state - link extended state - */ +/* Link extended state */ enum ethtool_link_ext_state { ETHTOOL_LINK_EXT_STATE_AUTONEG, ETHTOOL_LINK_EXT_STATE_LINK_TRAINING_FAILURE, @@ -593,12 +602,10 @@ enum ethtool_link_ext_state { ETHTOOL_LINK_EXT_STATE_CALIBRATION_FAILURE, ETHTOOL_LINK_EXT_STATE_POWER_BUDGET_EXCEEDED, ETHTOOL_LINK_EXT_STATE_OVERHEAT, + ETHTOOL_LINK_EXT_STATE_MODULE, }; -/** - * enum ethtool_link_ext_substate_autoneg - more information in addition to - * ETHTOOL_LINK_EXT_STATE_AUTONEG. - */ +/* More information in addition to ETHTOOL_LINK_EXT_STATE_AUTONEG. */ enum ethtool_link_ext_substate_autoneg { ETHTOOL_LINK_EXT_SUBSTATE_AN_NO_PARTNER_DETECTED = 1, ETHTOOL_LINK_EXT_SUBSTATE_AN_ACK_NOT_RECEIVED, @@ -608,9 +615,7 @@ enum ethtool_link_ext_substate_autoneg { ETHTOOL_LINK_EXT_SUBSTATE_AN_NO_HCD, }; -/** - * enum ethtool_link_ext_substate_link_training - more information in addition to - * ETHTOOL_LINK_EXT_STATE_LINK_TRAINING_FAILURE. +/* More information in addition to ETHTOOL_LINK_EXT_STATE_LINK_TRAINING_FAILURE. */ enum ethtool_link_ext_substate_link_training { ETHTOOL_LINK_EXT_SUBSTATE_LT_KR_FRAME_LOCK_NOT_ACQUIRED = 1, @@ -619,9 +624,7 @@ enum ethtool_link_ext_substate_link_training { ETHTOOL_LINK_EXT_SUBSTATE_LT_REMOTE_FAULT, }; -/** - * enum ethtool_link_ext_substate_logical_mismatch - more information in addition - * to ETHTOOL_LINK_EXT_STATE_LINK_LOGICAL_MISMATCH. +/* More information in addition to ETHTOOL_LINK_EXT_STATE_LINK_LOGICAL_MISMATCH. */ enum ethtool_link_ext_substate_link_logical_mismatch { ETHTOOL_LINK_EXT_SUBSTATE_LLM_PCS_DID_NOT_ACQUIRE_BLOCK_LOCK = 1, @@ -631,24 +634,26 @@ enum ethtool_link_ext_substate_link_logical_mismatch { ETHTOOL_LINK_EXT_SUBSTATE_LLM_RS_FEC_IS_NOT_LOCKED, }; -/** - * enum ethtool_link_ext_substate_bad_signal_integrity - more information in - * addition to ETHTOOL_LINK_EXT_STATE_BAD_SIGNAL_INTEGRITY. +/* More information in addition to ETHTOOL_LINK_EXT_STATE_BAD_SIGNAL_INTEGRITY. */ enum ethtool_link_ext_substate_bad_signal_integrity { ETHTOOL_LINK_EXT_SUBSTATE_BSI_LARGE_NUMBER_OF_PHYSICAL_ERRORS = 1, ETHTOOL_LINK_EXT_SUBSTATE_BSI_UNSUPPORTED_RATE, + ETHTOOL_LINK_EXT_SUBSTATE_BSI_SERDES_REFERENCE_CLOCK_LOST, + ETHTOOL_LINK_EXT_SUBSTATE_BSI_SERDES_ALOS, }; -/** - * enum ethtool_link_ext_substate_cable_issue - more information in - * addition to ETHTOOL_LINK_EXT_STATE_CABLE_ISSUE. - */ +/* More information in addition to ETHTOOL_LINK_EXT_STATE_CABLE_ISSUE. */ enum ethtool_link_ext_substate_cable_issue { ETHTOOL_LINK_EXT_SUBSTATE_CI_UNSUPPORTED_CABLE = 1, ETHTOOL_LINK_EXT_SUBSTATE_CI_CABLE_TEST_FAILURE, }; +/* More information in addition to ETHTOOL_LINK_EXT_STATE_MODULE. */ +enum ethtool_link_ext_substate_module { + ETHTOOL_LINK_EXT_SUBSTATE_MODULE_CMIS_NOT_READY = 1, +}; + #define ETH_GSTRING_LEN 32 /** @@ -661,6 +666,7 @@ enum ethtool_link_ext_substate_cable_issue { * now deprecated * @ETH_SS_FEATURES: Device feature names * @ETH_SS_RSS_HASH_FUNCS: RSS hush function names + * @ETH_SS_TUNABLES: tunable names * @ETH_SS_PHY_STATS: Statistic names, for use with %ETHTOOL_GPHYSTATS * @ETH_SS_PHY_TUNABLES: PHY tunable names * @ETH_SS_LINK_MODES: link mode names @@ -670,6 +676,15 @@ enum ethtool_link_ext_substate_cable_issue { * @ETH_SS_TS_TX_TYPES: timestamping Tx types * @ETH_SS_TS_RX_FILTERS: timestamping Rx filters * @ETH_SS_UDP_TUNNEL_TYPES: UDP tunnel types + * @ETH_SS_STATS_STD: standardized stats + * @ETH_SS_STATS_ETH_PHY: names of IEEE 802.3 PHY statistics + * @ETH_SS_STATS_ETH_MAC: names of IEEE 802.3 MAC statistics + * @ETH_SS_STATS_ETH_CTRL: names of IEEE 802.3 MAC Control statistics + * @ETH_SS_STATS_RMON: names of RMON statistics + * @ETH_SS_STATS_PHY: names of PHY(dev) statistics + * @ETH_SS_TS_FLAGS: hardware timestamping flags + * + * @ETH_SS_COUNT: number of defined string sets */ enum ethtool_stringset { ETH_SS_TEST = 0, @@ -688,12 +703,394 @@ enum ethtool_stringset { ETH_SS_TS_TX_TYPES, ETH_SS_TS_RX_FILTERS, ETH_SS_UDP_TUNNEL_TYPES, + ETH_SS_STATS_STD, + ETH_SS_STATS_ETH_PHY, + ETH_SS_STATS_ETH_MAC, + ETH_SS_STATS_ETH_CTRL, + ETH_SS_STATS_RMON, + ETH_SS_STATS_PHY, + ETH_SS_TS_FLAGS, /* add new constants above here */ ETH_SS_COUNT }; /** + * enum ethtool_mac_stats_src - source of ethtool MAC statistics + * @ETHTOOL_MAC_STATS_SRC_AGGREGATE: + * if device supports a MAC merge layer, this retrieves the aggregate + * statistics of the eMAC and pMAC. Otherwise, it retrieves just the + * statistics of the single (express) MAC. + * @ETHTOOL_MAC_STATS_SRC_EMAC: + * if device supports a MM layer, this retrieves the eMAC statistics. + * Otherwise, it retrieves the statistics of the single (express) MAC. + * @ETHTOOL_MAC_STATS_SRC_PMAC: + * if device supports a MM layer, this retrieves the pMAC statistics. + */ +enum ethtool_mac_stats_src { + ETHTOOL_MAC_STATS_SRC_AGGREGATE, + ETHTOOL_MAC_STATS_SRC_EMAC, + ETHTOOL_MAC_STATS_SRC_PMAC, +}; + +/** + * enum ethtool_module_power_mode_policy - plug-in module power mode policy + * @ETHTOOL_MODULE_POWER_MODE_POLICY_HIGH: Module is always in high power mode. + * @ETHTOOL_MODULE_POWER_MODE_POLICY_AUTO: Module is transitioned by the host + * to high power mode when the first port using it is put administratively + * up and to low power mode when the last port using it is put + * administratively down. + */ +enum ethtool_module_power_mode_policy { + ETHTOOL_MODULE_POWER_MODE_POLICY_HIGH = 1, + ETHTOOL_MODULE_POWER_MODE_POLICY_AUTO, +}; + +/** + * enum ethtool_module_power_mode - plug-in module power mode + * @ETHTOOL_MODULE_POWER_MODE_LOW: Module is in low power mode. + * @ETHTOOL_MODULE_POWER_MODE_HIGH: Module is in high power mode. + */ +enum ethtool_module_power_mode { + ETHTOOL_MODULE_POWER_MODE_LOW = 1, + ETHTOOL_MODULE_POWER_MODE_HIGH, +}; + +/** + * enum ethtool_c33_pse_ext_state - groups of PSE extended states + * functions. IEEE 802.3-2022 33.2.4.4 Variables + * + * @ETHTOOL_C33_PSE_EXT_STATE_ERROR_CONDITION: Group of error_condition states + * @ETHTOOL_C33_PSE_EXT_STATE_MR_MPS_VALID: Group of mr_mps_valid states + * @ETHTOOL_C33_PSE_EXT_STATE_MR_PSE_ENABLE: Group of mr_pse_enable states + * @ETHTOOL_C33_PSE_EXT_STATE_OPTION_DETECT_TED: Group of option_detect_ted + * states + * @ETHTOOL_C33_PSE_EXT_STATE_OPTION_VPORT_LIM: Group of option_vport_lim states + * @ETHTOOL_C33_PSE_EXT_STATE_OVLD_DETECTED: Group of ovld_detected states + * @ETHTOOL_C33_PSE_EXT_STATE_PD_DLL_POWER_TYPE: Group of pd_dll_power_type + * states + * @ETHTOOL_C33_PSE_EXT_STATE_POWER_NOT_AVAILABLE: Group of power_not_available + * states + * @ETHTOOL_C33_PSE_EXT_STATE_SHORT_DETECTED: Group of short_detected states + */ +enum ethtool_c33_pse_ext_state { + ETHTOOL_C33_PSE_EXT_STATE_ERROR_CONDITION = 1, + ETHTOOL_C33_PSE_EXT_STATE_MR_MPS_VALID, + ETHTOOL_C33_PSE_EXT_STATE_MR_PSE_ENABLE, + ETHTOOL_C33_PSE_EXT_STATE_OPTION_DETECT_TED, + ETHTOOL_C33_PSE_EXT_STATE_OPTION_VPORT_LIM, + ETHTOOL_C33_PSE_EXT_STATE_OVLD_DETECTED, + ETHTOOL_C33_PSE_EXT_STATE_PD_DLL_POWER_TYPE, + ETHTOOL_C33_PSE_EXT_STATE_POWER_NOT_AVAILABLE, + ETHTOOL_C33_PSE_EXT_STATE_SHORT_DETECTED, +}; + +/** + * enum ethtool_c33_pse_ext_substate_mr_mps_valid - mr_mps_valid states + * functions. IEEE 802.3-2022 33.2.4.4 Variables + * + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_MR_MPS_VALID_DETECTED_UNDERLOAD: Underload + * state + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_MR_MPS_VALID_CONNECTION_OPEN: Port is not + * connected + * + * The PSE monitors either the DC or AC Maintain Power Signature + * (MPS, see 33.2.9.1). This variable indicates the presence or absence of + * a valid MPS. + */ +enum ethtool_c33_pse_ext_substate_mr_mps_valid { + ETHTOOL_C33_PSE_EXT_SUBSTATE_MR_MPS_VALID_DETECTED_UNDERLOAD = 1, + ETHTOOL_C33_PSE_EXT_SUBSTATE_MR_MPS_VALID_CONNECTION_OPEN, +}; + +/** + * enum ethtool_c33_pse_ext_substate_error_condition - error_condition states + * functions. IEEE 802.3-2022 33.2.4.4 Variables + * + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_NON_EXISTING_PORT: Non-existing + * port number + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_UNDEFINED_PORT: Undefined port + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_INTERNAL_HW_FAULT: Internal + * hardware fault + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_COMM_ERROR_AFTER_FORCE_ON: + * Communication error after force on + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_UNKNOWN_PORT_STATUS: Unknown + * port status + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_HOST_CRASH_TURN_OFF: Host + * crash turn off + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_HOST_CRASH_FORCE_SHUTDOWN: + * Host crash force shutdown + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_CONFIG_CHANGE: Configuration + * change + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_DETECTED_OVER_TEMP: Over + * temperature detected + * + * error_condition is a variable indicating the status of + * implementation-specific fault conditions or optionally other system faults + * that prevent the PSE from meeting the specifications in Table 33–11 and that + * require the PSE not to source power. These error conditions are different + * from those monitored by the state diagrams in Figure 33–10. + */ +enum ethtool_c33_pse_ext_substate_error_condition { + ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_NON_EXISTING_PORT = 1, + ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_UNDEFINED_PORT, + ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_INTERNAL_HW_FAULT, + ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_COMM_ERROR_AFTER_FORCE_ON, + ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_UNKNOWN_PORT_STATUS, + ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_HOST_CRASH_TURN_OFF, + ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_HOST_CRASH_FORCE_SHUTDOWN, + ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_CONFIG_CHANGE, + ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_DETECTED_OVER_TEMP, +}; + +/** + * enum ethtool_c33_pse_ext_substate_mr_pse_enable - mr_pse_enable states + * functions. IEEE 802.3-2022 33.2.4.4 Variables + * + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_MR_PSE_ENABLE_DISABLE_PIN_ACTIVE: Disable + * pin active + * + * mr_pse_enable is control variable that selects PSE operation and test + * functions. + */ +enum ethtool_c33_pse_ext_substate_mr_pse_enable { + ETHTOOL_C33_PSE_EXT_SUBSTATE_MR_PSE_ENABLE_DISABLE_PIN_ACTIVE = 1, +}; + +/** + * enum ethtool_c33_pse_ext_substate_option_detect_ted - option_detect_ted + * states functions. IEEE 802.3-2022 33.2.4.4 Variables + * + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_DETECT_TED_DET_IN_PROCESS: Detection + * in process + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_DETECT_TED_CONNECTION_CHECK_ERROR: + * Connection check error + * + * option_detect_ted is a variable indicating if detection can be performed + * by the PSE during the ted_timer interval. + */ +enum ethtool_c33_pse_ext_substate_option_detect_ted { + ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_DETECT_TED_DET_IN_PROCESS = 1, + ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_DETECT_TED_CONNECTION_CHECK_ERROR, +}; + +/** + * enum ethtool_c33_pse_ext_substate_option_vport_lim - option_vport_lim states + * functions. IEEE 802.3-2022 33.2.4.4 Variables + * + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_HIGH_VOLTAGE: Main supply + * voltage is high + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_LOW_VOLTAGE: Main supply + * voltage is low + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_VOLTAGE_INJECTION: Voltage + * injection into the port + * + * option_vport_lim is an optional variable indicates if VPSE is out of the + * operating range during normal operating state. + */ +enum ethtool_c33_pse_ext_substate_option_vport_lim { + ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_HIGH_VOLTAGE = 1, + ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_LOW_VOLTAGE, + ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_VOLTAGE_INJECTION, +}; + +/** + * enum ethtool_c33_pse_ext_substate_ovld_detected - ovld_detected states + * functions. IEEE 802.3-2022 33.2.4.4 Variables + * + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_OVLD_DETECTED_OVERLOAD: Overload state + * + * ovld_detected is a variable indicating if the PSE output current has been + * in an overload condition (see 33.2.7.6) for at least TCUT of a one-second + * sliding time. + */ +enum ethtool_c33_pse_ext_substate_ovld_detected { + ETHTOOL_C33_PSE_EXT_SUBSTATE_OVLD_DETECTED_OVERLOAD = 1, +}; + +/** + * enum ethtool_c33_pse_ext_substate_power_not_available - power_not_available + * states functions. IEEE 802.3-2022 33.2.4.4 Variables + * + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_BUDGET_EXCEEDED: Power + * budget exceeded for the controller + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_PORT_PW_LIMIT_EXCEEDS_CONTROLLER_BUDGET: + * Configured port power limit exceeded controller power budget + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_PD_REQUEST_EXCEEDS_PORT_LIMIT: + * Power request from PD exceeds port limit + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_HW_PW_LIMIT: Power + * denied due to Hardware power limit + * + * power_not_available is a variable that is asserted in an + * implementation-dependent manner when the PSE is no longer capable of + * sourcing sufficient power to support the attached PD. Sufficient power + * is defined by classification; see 33.2.6. + */ +enum ethtool_c33_pse_ext_substate_power_not_available { + ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_BUDGET_EXCEEDED = 1, + ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_PORT_PW_LIMIT_EXCEEDS_CONTROLLER_BUDGET, + ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_PD_REQUEST_EXCEEDS_PORT_LIMIT, + ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_HW_PW_LIMIT, +}; + +/** + * enum ethtool_c33_pse_ext_substate_short_detected - short_detected states + * functions. IEEE 802.3-2022 33.2.4.4 Variables + * + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_SHORT_DETECTED_SHORT_CONDITION: Short + * condition was detected + * + * short_detected is a variable indicating if the PSE output current has been + * in a short circuit condition for TLIM within a sliding window (see 33.2.7.7). + */ +enum ethtool_c33_pse_ext_substate_short_detected { + ETHTOOL_C33_PSE_EXT_SUBSTATE_SHORT_DETECTED_SHORT_CONDITION = 1, +}; + +/** + * enum ethtool_pse_types - Types of PSE controller. + * @ETHTOOL_PSE_UNKNOWN: Type of PSE controller is unknown + * @ETHTOOL_PSE_PODL: PSE controller which support PoDL + * @ETHTOOL_PSE_C33: PSE controller which support Clause 33 (PoE) + */ +enum ethtool_pse_types { + ETHTOOL_PSE_UNKNOWN = 1 << 0, + ETHTOOL_PSE_PODL = 1 << 1, + ETHTOOL_PSE_C33 = 1 << 2, +}; + +/** + * enum ethtool_c33_pse_admin_state - operational state of the PoDL PSE + * functions. IEEE 802.3-2022 30.9.1.1.2 aPSEAdminState + * @ETHTOOL_C33_PSE_ADMIN_STATE_UNKNOWN: state of PSE functions is unknown + * @ETHTOOL_C33_PSE_ADMIN_STATE_DISABLED: PSE functions are disabled + * @ETHTOOL_C33_PSE_ADMIN_STATE_ENABLED: PSE functions are enabled + */ +enum ethtool_c33_pse_admin_state { + ETHTOOL_C33_PSE_ADMIN_STATE_UNKNOWN = 1, + ETHTOOL_C33_PSE_ADMIN_STATE_DISABLED, + ETHTOOL_C33_PSE_ADMIN_STATE_ENABLED, +}; + +/** + * enum ethtool_c33_pse_pw_d_status - power detection status of the PSE. + * IEEE 802.3-2022 30.9.1.1.3 aPoDLPSEPowerDetectionStatus: + * @ETHTOOL_C33_PSE_PW_D_STATUS_UNKNOWN: PSE status is unknown + * @ETHTOOL_C33_PSE_PW_D_STATUS_DISABLED: The enumeration "disabled" + * indicates that the PSE State diagram is in the state DISABLED. + * @ETHTOOL_C33_PSE_PW_D_STATUS_SEARCHING: The enumeration "searching" + * indicates the PSE State diagram is in a state other than those + * listed. + * @ETHTOOL_C33_PSE_PW_D_STATUS_DELIVERING: The enumeration + * "deliveringPower" indicates that the PSE State diagram is in the + * state POWER_ON. + * @ETHTOOL_C33_PSE_PW_D_STATUS_TEST: The enumeration "test" indicates that + * the PSE State diagram is in the state TEST_MODE. + * @ETHTOOL_C33_PSE_PW_D_STATUS_FAULT: The enumeration "fault" indicates that + * the PSE State diagram is in the state TEST_ERROR. + * @ETHTOOL_C33_PSE_PW_D_STATUS_OTHERFAULT: The enumeration "otherFault" + * indicates that the PSE State diagram is in the state IDLE due to + * the variable error_condition = true. + */ +enum ethtool_c33_pse_pw_d_status { + ETHTOOL_C33_PSE_PW_D_STATUS_UNKNOWN = 1, + ETHTOOL_C33_PSE_PW_D_STATUS_DISABLED, + ETHTOOL_C33_PSE_PW_D_STATUS_SEARCHING, + ETHTOOL_C33_PSE_PW_D_STATUS_DELIVERING, + ETHTOOL_C33_PSE_PW_D_STATUS_TEST, + ETHTOOL_C33_PSE_PW_D_STATUS_FAULT, + ETHTOOL_C33_PSE_PW_D_STATUS_OTHERFAULT, +}; + +/** + * enum ethtool_podl_pse_admin_state - operational state of the PoDL PSE + * functions. IEEE 802.3-2018 30.15.1.1.2 aPoDLPSEAdminState + * @ETHTOOL_PODL_PSE_ADMIN_STATE_UNKNOWN: state of PoDL PSE functions are + * unknown + * @ETHTOOL_PODL_PSE_ADMIN_STATE_DISABLED: PoDL PSE functions are disabled + * @ETHTOOL_PODL_PSE_ADMIN_STATE_ENABLED: PoDL PSE functions are enabled + */ +enum ethtool_podl_pse_admin_state { + ETHTOOL_PODL_PSE_ADMIN_STATE_UNKNOWN = 1, + ETHTOOL_PODL_PSE_ADMIN_STATE_DISABLED, + ETHTOOL_PODL_PSE_ADMIN_STATE_ENABLED, +}; + +/** + * enum ethtool_podl_pse_pw_d_status - power detection status of the PoDL PSE. + * IEEE 802.3-2018 30.15.1.1.3 aPoDLPSEPowerDetectionStatus: + * @ETHTOOL_PODL_PSE_PW_D_STATUS_UNKNOWN: PoDL PSE + * @ETHTOOL_PODL_PSE_PW_D_STATUS_DISABLED: "The enumeration “disabled” is + * asserted true when the PoDL PSE state diagram variable mr_pse_enable is + * false" + * @ETHTOOL_PODL_PSE_PW_D_STATUS_SEARCHING: "The enumeration “searching” is + * asserted true when either of the PSE state diagram variables + * pi_detecting or pi_classifying is true." + * @ETHTOOL_PODL_PSE_PW_D_STATUS_DELIVERING: "The enumeration “deliveringPower” + * is asserted true when the PoDL PSE state diagram variable pi_powered is + * true." + * @ETHTOOL_PODL_PSE_PW_D_STATUS_SLEEP: "The enumeration “sleep” is asserted + * true when the PoDL PSE state diagram variable pi_sleeping is true." + * @ETHTOOL_PODL_PSE_PW_D_STATUS_IDLE: "The enumeration “idle” is asserted true + * when the logical combination of the PoDL PSE state diagram variables + * pi_prebiased*!pi_sleeping is true." + * @ETHTOOL_PODL_PSE_PW_D_STATUS_ERROR: "The enumeration “error” is asserted + * true when the PoDL PSE state diagram variable overload_held is true." + */ +enum ethtool_podl_pse_pw_d_status { + ETHTOOL_PODL_PSE_PW_D_STATUS_UNKNOWN = 1, + ETHTOOL_PODL_PSE_PW_D_STATUS_DISABLED, + ETHTOOL_PODL_PSE_PW_D_STATUS_SEARCHING, + ETHTOOL_PODL_PSE_PW_D_STATUS_DELIVERING, + ETHTOOL_PODL_PSE_PW_D_STATUS_SLEEP, + ETHTOOL_PODL_PSE_PW_D_STATUS_IDLE, + ETHTOOL_PODL_PSE_PW_D_STATUS_ERROR, +}; + +/** + * enum ethtool_mm_verify_status - status of MAC Merge Verify function + * @ETHTOOL_MM_VERIFY_STATUS_UNKNOWN: + * verification status is unknown + * @ETHTOOL_MM_VERIFY_STATUS_INITIAL: + * the 802.3 Verify State diagram is in the state INIT_VERIFICATION + * @ETHTOOL_MM_VERIFY_STATUS_VERIFYING: + * the Verify State diagram is in the state VERIFICATION_IDLE, + * SEND_VERIFY or WAIT_FOR_RESPONSE + * @ETHTOOL_MM_VERIFY_STATUS_SUCCEEDED: + * indicates that the Verify State diagram is in the state VERIFIED + * @ETHTOOL_MM_VERIFY_STATUS_FAILED: + * the Verify State diagram is in the state VERIFY_FAIL + * @ETHTOOL_MM_VERIFY_STATUS_DISABLED: + * verification of preemption operation is disabled + */ +enum ethtool_mm_verify_status { + ETHTOOL_MM_VERIFY_STATUS_UNKNOWN, + ETHTOOL_MM_VERIFY_STATUS_INITIAL, + ETHTOOL_MM_VERIFY_STATUS_VERIFYING, + ETHTOOL_MM_VERIFY_STATUS_SUCCEEDED, + ETHTOOL_MM_VERIFY_STATUS_FAILED, + ETHTOOL_MM_VERIFY_STATUS_DISABLED, +}; + +/** + * enum ethtool_module_fw_flash_status - plug-in module firmware flashing status + * @ETHTOOL_MODULE_FW_FLASH_STATUS_STARTED: The firmware flashing process has + * started. + * @ETHTOOL_MODULE_FW_FLASH_STATUS_IN_PROGRESS: The firmware flashing process + * is in progress. + * @ETHTOOL_MODULE_FW_FLASH_STATUS_COMPLETED: The firmware flashing process was + * completed successfully. + * @ETHTOOL_MODULE_FW_FLASH_STATUS_ERROR: The firmware flashing process was + * stopped due to an error. + */ +enum ethtool_module_fw_flash_status { + ETHTOOL_MODULE_FW_FLASH_STATUS_STARTED = 1, + ETHTOOL_MODULE_FW_FLASH_STATUS_IN_PROGRESS, + ETHTOOL_MODULE_FW_FLASH_STATUS_COMPLETED, + ETHTOOL_MODULE_FW_FLASH_STATUS_ERROR, +}; + +/** * struct ethtool_gstrings - string set for data tagging * @cmd: Command number = %ETHTOOL_GSTRINGS * @string_set: String set ID; one of &enum ethtool_stringset @@ -709,12 +1106,13 @@ struct ethtool_gstrings { __u32 cmd; __u32 string_set; __u32 len; - __u8 data[0]; + __u8 data[]; }; /** * struct ethtool_sset_info - string set information * @cmd: Command number = %ETHTOOL_GSSET_INFO + * @reserved: Reserved for future use; see the note on reserved space. * @sset_mask: On entry, a bitmask of string sets to query, with bits * numbered according to &enum ethtool_stringset. On return, a * bitmask of those string sets queried that are supported. @@ -733,7 +1131,7 @@ struct ethtool_sset_info { __u32 cmd; __u32 reserved; __u64 sset_mask; - __u32 data[0]; + __u32 data[]; }; /** @@ -759,6 +1157,7 @@ enum ethtool_test_flags { * @flags: A bitmask of flags from &enum ethtool_test_flags. Some * flags may be set by the user on entry; others may be set by * the driver on return. + * @reserved: Reserved for future use; see the note on reserved space. * @len: On return, the number of test results * @data: Array of test results * @@ -772,7 +1171,7 @@ struct ethtool_test { __u32 flags; __u32 reserved; __u32 len; - __u64 data[0]; + __u64 data[]; }; /** @@ -789,7 +1188,7 @@ struct ethtool_test { struct ethtool_stats { __u32 cmd; __u32 n_stats; - __u64 data[0]; + __u64 data[]; }; /** @@ -806,7 +1205,7 @@ struct ethtool_stats { struct ethtool_perm_addr { __u32 cmd; __u32 size; - __u8 data[0]; + __u8 data[]; }; /* boolean flags controlling per-interface behavior characteristics. @@ -959,6 +1358,7 @@ union ethtool_flow_union { * @vlan_etype: VLAN EtherType * @vlan_tci: VLAN tag control information * @data: user defined data + * @padding: Reserved for future use; see the note on reserved space. * * Note, @vlan_etype, @vlan_tci, and @data are only valid if %FLOW_EXT * is set in &struct ethtool_rx_flow_spec @flow_type. @@ -1094,7 +1494,7 @@ struct ethtool_rxnfc { __u32 rule_cnt; __u32 rss_context; }; - __u32 rule_locs[0]; + __u32 rule_locs[]; }; @@ -1114,7 +1514,7 @@ struct ethtool_rxnfc { struct ethtool_rxfh_indir { __u32 cmd; __u32 size; - __u32 ring_index[0]; + __u32 ring_index[]; }; /** @@ -1134,7 +1534,10 @@ struct ethtool_rxfh_indir { * hardware hash key. * @hfunc: Defines the current RSS hash function used by HW (or to be set to). * Valid values are one of the %ETH_RSS_HASH_*. - * @rsvd: Reserved for future extensions. + * @input_xfrm: Defines how the input data is transformed. Valid values are one + * of %RXH_XFRM_*. + * @rsvd8: Reserved for future use; see the note on reserved space. + * @rsvd32: Reserved for future use; see the note on reserved space. * @rss_config: RX ring/queue index for each hash value i.e., indirection table * of @indir_size __u32 elements, followed by hash key of @key_size * bytes. @@ -1152,9 +1555,10 @@ struct ethtool_rxfh { __u32 indir_size; __u32 key_size; __u8 hfunc; - __u8 rsvd8[3]; + __u8 input_xfrm; + __u8 rsvd8[2]; __u32 rsvd32; - __u32 rss_config[0]; + __u32 rss_config[]; }; #define ETH_RXFH_CONTEXT_ALLOC 0xffffffff #define ETH_RXFH_INDIR_NO_CHANGE 0xffffffff @@ -1239,7 +1643,7 @@ struct ethtool_dump { __u32 version; __u32 flag; __u32 len; - __u8 data[0]; + __u8 data[]; }; #define ETH_FW_DUMP_DISABLE 0 @@ -1271,7 +1675,7 @@ struct ethtool_get_features_block { struct ethtool_gfeatures { __u32 cmd; __u32 size; - struct ethtool_get_features_block features[0]; + struct ethtool_get_features_block features[]; }; /** @@ -1293,7 +1697,7 @@ struct ethtool_set_features_block { struct ethtool_sfeatures { __u32 cmd; __u32 size; - struct ethtool_set_features_block features[0]; + struct ethtool_set_features_block features[]; }; /** @@ -1302,7 +1706,9 @@ struct ethtool_sfeatures { * @so_timestamping: bit mask of the sum of the supported SO_TIMESTAMPING flags * @phc_index: device index of the associated PHC, or -1 if there is none * @tx_types: bit mask of the supported hwtstamp_tx_types enumeration values + * @tx_reserved: Reserved for future use; see the note on reserved space. * @rx_filters: bit mask of the supported hwtstamp_rx_filters enumeration values + * @rx_reserved: Reserved for future use; see the note on reserved space. * * The bits in the 'tx_types' and 'rx_filters' fields correspond to * the 'hwtstamp_tx_types' and 'hwtstamp_rx_filters' enumeration values, @@ -1376,15 +1782,33 @@ struct ethtool_per_queue_op { }; /** - * struct ethtool_fecparam - Ethernet forward error correction(fec) parameters + * struct ethtool_fecparam - Ethernet Forward Error Correction parameters * @cmd: Command number = %ETHTOOL_GFECPARAM or %ETHTOOL_SFECPARAM - * @active_fec: FEC mode which is active on porte - * @fec: Bitmask of supported/configured FEC modes - * @rsvd: Reserved for future extensions. i.e FEC bypass feature. + * @active_fec: FEC mode which is active on the port, single bit set, GET only. + * @fec: Bitmask of configured FEC modes. + * @reserved: Reserved for future extensions, ignore on GET, write 0 for SET. * - * Drivers should reject a non-zero setting of @autoneg when - * autoneogotiation is disabled (or not supported) for the link. + * Note that @reserved was never validated on input and ethtool user space + * left it uninitialized when calling SET. Hence going forward it can only be + * used to return a value to userspace with GET. + * + * FEC modes supported by the device can be read via %ETHTOOL_GLINKSETTINGS. + * FEC settings are configured by link autonegotiation whenever it's enabled. + * With autoneg on %ETHTOOL_GFECPARAM can be used to read the current mode. + * + * When autoneg is disabled %ETHTOOL_SFECPARAM controls the FEC settings. + * It is recommended that drivers only accept a single bit set in @fec. + * When multiple bits are set in @fec drivers may pick mode in an implementation + * dependent way. Drivers should reject mixing %ETHTOOL_FEC_AUTO_BIT with other + * FEC modes, because it's unclear whether in this case other modes constrain + * AUTO or are independent choices. + * Drivers must reject SET requests if they support none of the requested modes. + * + * If device does not support FEC drivers may use %ETHTOOL_FEC_NONE instead + * of returning %EOPNOTSUPP from %ETHTOOL_GFECPARAM. * + * See enum ethtool_fec_config_bits for definition of valid bits for both + * @fec and @active_fec. */ struct ethtool_fecparam { __u32 cmd; @@ -1396,11 +1820,16 @@ struct ethtool_fecparam { /** * enum ethtool_fec_config_bits - flags definition of ethtool_fec_configuration - * @ETHTOOL_FEC_NONE: FEC mode configuration is not supported - * @ETHTOOL_FEC_AUTO: Default/Best FEC mode provided by driver - * @ETHTOOL_FEC_OFF: No FEC Mode - * @ETHTOOL_FEC_RS: Reed-Solomon Forward Error Detection mode - * @ETHTOOL_FEC_BASER: Base-R/Reed-Solomon Forward Error Detection mode + * @ETHTOOL_FEC_NONE_BIT: FEC mode configuration is not supported. Should not + * be used together with other bits. GET only. + * @ETHTOOL_FEC_AUTO_BIT: Select default/best FEC mode automatically, usually + * based link mode and SFP parameters read from module's + * EEPROM. This bit does _not_ mean autonegotiation. + * @ETHTOOL_FEC_OFF_BIT: No FEC Mode + * @ETHTOOL_FEC_RS_BIT: Reed-Solomon FEC Mode + * @ETHTOOL_FEC_BASER_BIT: Base-R/Reed-Solomon FEC Mode + * @ETHTOOL_FEC_LLRS_BIT: Low Latency Reed Solomon FEC Mode (25G/50G Ethernet + * Consortium) */ enum ethtool_fec_config_bits { ETHTOOL_FEC_NONE_BIT, @@ -1619,6 +2048,36 @@ enum ethtool_link_mode_bit_indices { ETHTOOL_LINK_MODE_400000baseCR4_Full_BIT = 89, ETHTOOL_LINK_MODE_100baseFX_Half_BIT = 90, ETHTOOL_LINK_MODE_100baseFX_Full_BIT = 91, + ETHTOOL_LINK_MODE_10baseT1L_Full_BIT = 92, + ETHTOOL_LINK_MODE_800000baseCR8_Full_BIT = 93, + ETHTOOL_LINK_MODE_800000baseKR8_Full_BIT = 94, + ETHTOOL_LINK_MODE_800000baseDR8_Full_BIT = 95, + ETHTOOL_LINK_MODE_800000baseDR8_2_Full_BIT = 96, + ETHTOOL_LINK_MODE_800000baseSR8_Full_BIT = 97, + ETHTOOL_LINK_MODE_800000baseVR8_Full_BIT = 98, + ETHTOOL_LINK_MODE_10baseT1S_Full_BIT = 99, + ETHTOOL_LINK_MODE_10baseT1S_Half_BIT = 100, + ETHTOOL_LINK_MODE_10baseT1S_P2MP_Half_BIT = 101, + ETHTOOL_LINK_MODE_10baseT1BRR_Full_BIT = 102, + ETHTOOL_LINK_MODE_200000baseCR_Full_BIT = 103, + ETHTOOL_LINK_MODE_200000baseKR_Full_BIT = 104, + ETHTOOL_LINK_MODE_200000baseDR_Full_BIT = 105, + ETHTOOL_LINK_MODE_200000baseDR_2_Full_BIT = 106, + ETHTOOL_LINK_MODE_200000baseSR_Full_BIT = 107, + ETHTOOL_LINK_MODE_200000baseVR_Full_BIT = 108, + ETHTOOL_LINK_MODE_400000baseCR2_Full_BIT = 109, + ETHTOOL_LINK_MODE_400000baseKR2_Full_BIT = 110, + ETHTOOL_LINK_MODE_400000baseDR2_Full_BIT = 111, + ETHTOOL_LINK_MODE_400000baseDR2_2_Full_BIT = 112, + ETHTOOL_LINK_MODE_400000baseSR2_Full_BIT = 113, + ETHTOOL_LINK_MODE_400000baseVR2_Full_BIT = 114, + ETHTOOL_LINK_MODE_800000baseCR4_Full_BIT = 115, + ETHTOOL_LINK_MODE_800000baseKR4_Full_BIT = 116, + ETHTOOL_LINK_MODE_800000baseDR4_Full_BIT = 117, + ETHTOOL_LINK_MODE_800000baseDR4_2_Full_BIT = 118, + ETHTOOL_LINK_MODE_800000baseSR4_Full_BIT = 119, + ETHTOOL_LINK_MODE_800000baseVR4_Full_BIT = 120, + /* must be last entry */ __ETHTOOL_LINK_MODE_MASK_NBITS }; @@ -1730,6 +2189,7 @@ enum ethtool_link_mode_bit_indices { #define SPEED_100000 100000 #define SPEED_200000 200000 #define SPEED_400000 400000 +#define SPEED_800000 800000 #define SPEED_UNKNOWN -1 @@ -1767,6 +2227,20 @@ static inline int ethtool_validate_duplex(__u8 duplex) #define MASTER_SLAVE_STATE_SLAVE 3 #define MASTER_SLAVE_STATE_ERR 4 +/* These are used to throttle the rate of data on the phy interface when the + * native speed of the interface is higher than the link speed. These should + * not be used for phy interfaces which natively support multiple speeds (e.g. + * MII or SGMII). + */ +/* No rate matching performed. */ +#define RATE_MATCH_NONE 0 +/* The phy sends pause frames to throttle the MAC. */ +#define RATE_MATCH_PAUSE 1 +/* The phy asserts CRS to prevent the MAC from transmitting. */ +#define RATE_MATCH_CRS 2 +/* The MAC is programmed with a sufficiently-large IPG. */ +#define RATE_MATCH_OPEN_LOOP 3 + /* Which connector port. */ #define PORT_TP 0x00 #define PORT_AUI 0x01 @@ -1808,25 +2282,89 @@ static inline int ethtool_validate_duplex(__u8 duplex) #define WOL_MODE_COUNT 8 -/* L2-L4 network traffic flow types */ -#define TCP_V4_FLOW 0x01 /* hash or spec (tcp_ip4_spec) */ -#define UDP_V4_FLOW 0x02 /* hash or spec (udp_ip4_spec) */ -#define SCTP_V4_FLOW 0x03 /* hash or spec (sctp_ip4_spec) */ -#define AH_ESP_V4_FLOW 0x04 /* hash only */ -#define TCP_V6_FLOW 0x05 /* hash or spec (tcp_ip6_spec; nfc only) */ -#define UDP_V6_FLOW 0x06 /* hash or spec (udp_ip6_spec; nfc only) */ -#define SCTP_V6_FLOW 0x07 /* hash or spec (sctp_ip6_spec; nfc only) */ -#define AH_ESP_V6_FLOW 0x08 /* hash only */ -#define AH_V4_FLOW 0x09 /* hash or spec (ah_ip4_spec) */ -#define ESP_V4_FLOW 0x0a /* hash or spec (esp_ip4_spec) */ -#define AH_V6_FLOW 0x0b /* hash or spec (ah_ip6_spec; nfc only) */ -#define ESP_V6_FLOW 0x0c /* hash or spec (esp_ip6_spec; nfc only) */ -#define IPV4_USER_FLOW 0x0d /* spec only (usr_ip4_spec) */ -#define IP_USER_FLOW IPV4_USER_FLOW -#define IPV6_USER_FLOW 0x0e /* spec only (usr_ip6_spec; nfc only) */ -#define IPV4_FLOW 0x10 /* hash only */ -#define IPV6_FLOW 0x11 /* hash only */ -#define ETHER_FLOW 0x12 /* spec only (ether_spec) */ +/* RSS hash function data + * XOR the corresponding source and destination fields of each specified + * protocol. Both copies of the XOR'ed fields are fed into the RSS and RXHASH + * calculation. Note that this XORing reduces the input set entropy and could + * be exploited to reduce the RSS queue spread. + */ +#define RXH_XFRM_SYM_XOR (1 << 0) +/* Similar to SYM_XOR, except that one copy of the XOR'ed fields is replaced by + * an OR of the same fields + */ +#define RXH_XFRM_SYM_OR_XOR (1 << 1) +#define RXH_XFRM_NO_CHANGE 0xff + +enum { + /* L2-L4 network traffic flow types */ + TCP_V4_FLOW = 0x01, /* hash or spec (tcp_ip4_spec) */ + UDP_V4_FLOW = 0x02, /* hash or spec (udp_ip4_spec) */ + SCTP_V4_FLOW = 0x03, /* hash or spec (sctp_ip4_spec) */ + AH_ESP_V4_FLOW = 0x04, /* hash only */ + TCP_V6_FLOW = 0x05, /* hash or spec (tcp_ip6_spec; nfc only) */ + UDP_V6_FLOW = 0x06, /* hash or spec (udp_ip6_spec; nfc only) */ + SCTP_V6_FLOW = 0x07, /* hash or spec (sctp_ip6_spec; nfc only) */ + AH_ESP_V6_FLOW = 0x08, /* hash only */ + AH_V4_FLOW = 0x09, /* hash or spec (ah_ip4_spec) */ + ESP_V4_FLOW = 0x0a, /* hash or spec (esp_ip4_spec) */ + AH_V6_FLOW = 0x0b, /* hash or spec (ah_ip6_spec; nfc only) */ + ESP_V6_FLOW = 0x0c, /* hash or spec (esp_ip6_spec; nfc only) */ + IPV4_USER_FLOW = 0x0d, /* spec only (usr_ip4_spec) */ + IP_USER_FLOW = IPV4_USER_FLOW, + IPV6_USER_FLOW = 0x0e, /* spec only (usr_ip6_spec; nfc only) */ + IPV4_FLOW = 0x10, /* hash only */ + IPV6_FLOW = 0x11, /* hash only */ + ETHER_FLOW = 0x12, /* spec only (ether_spec) */ + + /* Used for GTP-U IPv4 and IPv6. + * The format of GTP packets only includes + * elements such as TEID and GTP version. + * It is primarily intended for data communication of the UE. + */ + GTPU_V4_FLOW = 0x13, /* hash only */ + GTPU_V6_FLOW = 0x14, /* hash only */ + + /* Use for GTP-C IPv4 and v6. + * The format of these GTP packets does not include TEID. + * Primarily expected to be used for communication + * to create sessions for UE data communication, + * commonly referred to as CSR (Create Session Request). + */ + GTPC_V4_FLOW = 0x15, /* hash only */ + GTPC_V6_FLOW = 0x16, /* hash only */ + + /* Use for GTP-C IPv4 and v6. + * Unlike GTPC_V4_FLOW, the format of these GTP packets includes TEID. + * After session creation, it becomes this packet. + * This is mainly used for requests to realize UE handover. + */ + GTPC_TEID_V4_FLOW = 0x17, /* hash only */ + GTPC_TEID_V6_FLOW = 0x18, /* hash only */ + + /* Use for GTP-U and extended headers for the PSC (PDU Session Container). + * The format of these GTP packets includes TEID and QFI. + * In 5G communication using UPF (User Plane Function), + * data communication with this extended header is performed. + */ + GTPU_EH_V4_FLOW = 0x19, /* hash only */ + GTPU_EH_V6_FLOW = 0x1a, /* hash only */ + + /* Use for GTP-U IPv4 and v6 PSC (PDU Session Container) extended headers. + * This differs from GTPU_EH_V(4|6)_FLOW in that it is distinguished by + * UL/DL included in the PSC. + * There are differences in the data included based on Downlink/Uplink, + * and can be used to distinguish packets. + * The functions described so far are useful when you want to + * handle communication from the mobile network in UPF, PGW, etc. + */ + GTPU_UL_V4_FLOW = 0x1b, /* hash only */ + GTPU_UL_V6_FLOW = 0x1c, /* hash only */ + GTPU_DL_V4_FLOW = 0x1d, /* hash only */ + GTPU_DL_V6_FLOW = 0x1e, /* hash only */ + + __FLOW_TYPE_COUNT, +}; + /* Flag to enable additional fields in struct ethtool_rx_flow_spec */ #define FLOW_EXT 0x80000000 #define FLOW_MAC_EXT 0x40000000 @@ -1841,6 +2379,7 @@ static inline int ethtool_validate_duplex(__u8 duplex) #define RXH_IP_DST (1 << 5) #define RXH_L4_B_0_1 (1 << 6) /* src port in case of TCP/UDP/SCTP */ #define RXH_L4_B_2_3 (1 << 7) /* dst port in case of TCP/UDP/SCTP */ +#define RXH_GTP_TEID (1 << 8) /* teid in case of GTP */ #define RXH_DISCARD (1 << 31) #define RX_CLS_FLOW_DISC 0xffffffffffffffffULL @@ -1944,20 +2483,13 @@ enum ethtool_reset_flags { * refused. For drivers: ignore this field (use kernel's * __ETHTOOL_LINK_MODE_MASK_NBITS instead), any change to it will * be overwritten by kernel. - * @supported: Bitmap with each bit meaning given by - * %ethtool_link_mode_bit_indices for the link modes, physical - * connectors and other link features for which the interface - * supports autonegotiation or auto-detection. Read-only. - * @advertising: Bitmap with each bit meaning given by - * %ethtool_link_mode_bit_indices for the link modes, physical - * connectors and other link features that are advertised through - * autonegotiation or enabled for auto-detection. - * @lp_advertising: Bitmap with each bit meaning given by - * %ethtool_link_mode_bit_indices for the link modes, and other - * link features that the link partner advertised through - * autonegotiation; 0 if unknown or not applicable. Read-only. * @transceiver: Used to distinguish different possible PHY types, * reported consistently by PHYLIB. Read-only. + * @master_slave_cfg: Master/slave port mode. + * @master_slave_state: Master/slave port state. + * @rate_matching: Rate adaptation performed by the PHY + * @reserved: Reserved for future use; see the note on reserved space. + * @link_mode_masks: Variable length bitmaps. * * If autonegotiation is disabled, the speed and @duplex represent the * fixed link mode and are writable if the driver supports multiple @@ -1992,6 +2524,21 @@ enum ethtool_reset_flags { * %set_link_ksettings() should validate all fields other than @cmd * and @link_mode_masks_nwords that are not described as read-only or * deprecated, and must ignore all fields described as read-only. + * + * @link_mode_masks is divided into three bitfields, each of length + * @link_mode_masks_nwords: + * - supported: Bitmap with each bit meaning given by + * %ethtool_link_mode_bit_indices for the link modes, physical + * connectors and other link features for which the interface + * supports autonegotiation or auto-detection. Read-only. + * - advertising: Bitmap with each bit meaning given by + * %ethtool_link_mode_bit_indices for the link modes, physical + * connectors and other link features that are advertised through + * autonegotiation or enabled for auto-detection. + * - lp_advertising: Bitmap with each bit meaning given by + * %ethtool_link_mode_bit_indices for the link modes, and other + * link features that the link partner advertised through + * autonegotiation; 0 if unknown or not applicable. Read-only. */ struct ethtool_link_settings { __u32 cmd; @@ -2007,13 +2554,36 @@ struct ethtool_link_settings { __u8 transceiver; __u8 master_slave_cfg; __u8 master_slave_state; - __u8 reserved1[1]; + __u8 rate_matching; __u32 reserved[7]; - __u32 link_mode_masks[0]; +#ifndef __KERNEL__ + /* Linux builds with -Wflex-array-member-not-at-end but does + * not use the "link_mode_masks" member. Leave it defined for + * userspace for now, and when userspace wants to start using + * -Wfamnae, we'll need a new solution. + */ + __u32 link_mode_masks[]; /* layout of link_mode_masks fields: * __u32 map_supported[link_mode_masks_nwords]; * __u32 map_advertising[link_mode_masks_nwords]; * __u32 map_lp_advertising[link_mode_masks_nwords]; */ +#endif }; + +/** + * enum phy_upstream - Represents the upstream component a given PHY device + * is connected to, as in what is on the other end of the MII bus. Most PHYs + * will be attached to an Ethernet MAC controller, but in some cases, there's + * an intermediate PHY used as a media-converter, which will driver another + * MII interface as its output. + * @PHY_UPSTREAM_MAC: Upstream component is a MAC (a switch port, + * or ethernet controller) + * @PHY_UPSTREAM_PHY: Upstream component is a PHY (likely a media converter) + */ +enum phy_upstream { + PHY_UPSTREAM_MAC, + PHY_UPSTREAM_PHY, +}; + #endif /* _UAPI_LINUX_ETHTOOL_H */ |