diff options
Diffstat (limited to 'include/uapi/linux/mdio.h')
| -rw-r--r-- | include/uapi/linux/mdio.h | 140 |
1 files changed, 140 insertions, 0 deletions
diff --git a/include/uapi/linux/mdio.h b/include/uapi/linux/mdio.h index 3f302e2523b2..6975f182b22c 100644 --- a/include/uapi/linux/mdio.h +++ b/include/uapi/linux/mdio.h @@ -23,6 +23,7 @@ #define MDIO_MMD_DTEXS 5 /* DTE Extender Sublayer */ #define MDIO_MMD_TC 6 /* Transmission Convergence */ #define MDIO_MMD_AN 7 /* Auto-Negotiation */ +#define MDIO_MMD_POWER_UNIT 13 /* PHY Power Unit */ #define MDIO_MMD_C22EXT 29 /* Clause 22 extension */ #define MDIO_MMD_VEND1 30 /* Vendor specific 1 */ #define MDIO_MMD_VEND2 31 /* Vendor specific 2 */ @@ -53,18 +54,37 @@ #define MDIO_AN_EEE_LPABLE 61 /* EEE link partner ability */ #define MDIO_AN_EEE_ADV2 62 /* EEE advertisement 2 */ #define MDIO_AN_EEE_LPABLE2 63 /* EEE link partner ability 2 */ +#define MDIO_AN_CTRL2 64 /* AN THP bypass request control */ /* Media-dependent registers. */ #define MDIO_PMA_10GBT_SWAPPOL 130 /* 10GBASE-T pair swap & polarity */ #define MDIO_PMA_10GBT_TXPWR 131 /* 10GBASE-T TX power control */ #define MDIO_PMA_10GBT_SNR 133 /* 10GBASE-T SNR margin, lane A. * Lanes B-D are numbered 134-136. */ +#define MDIO_PMA_10GBR_FSRT_CSR 147 /* 10GBASE-R fast retrain status and control */ #define MDIO_PMA_10GBR_FECABLE 170 /* 10GBASE-R FEC ability */ #define MDIO_PCS_10GBX_STAT1 24 /* 10GBASE-X PCS status 1 */ #define MDIO_PCS_10GBRT_STAT1 32 /* 10GBASE-R/-T PCS status 1 */ #define MDIO_PCS_10GBRT_STAT2 33 /* 10GBASE-R/-T PCS status 2 */ #define MDIO_AN_10GBT_CTRL 32 /* 10GBASE-T auto-negotiation control */ #define MDIO_AN_10GBT_STAT 33 /* 10GBASE-T auto-negotiation status */ +#define MDIO_B10L_PMA_CTRL 2294 /* 10BASE-T1L PMA control */ +#define MDIO_PMA_10T1L_STAT 2295 /* 10BASE-T1L PMA status */ +#define MDIO_PCS_10T1L_CTRL 2278 /* 10BASE-T1L PCS control */ +#define MDIO_PMA_PMD_BT1 18 /* BASE-T1 PMA/PMD extended ability */ +#define MDIO_AN_T1_CTRL 512 /* BASE-T1 AN control */ +#define MDIO_AN_T1_STAT 513 /* BASE-T1 AN status */ +#define MDIO_AN_T1_ADV_L 514 /* BASE-T1 AN advertisement register [15:0] */ +#define MDIO_AN_T1_ADV_M 515 /* BASE-T1 AN advertisement register [31:16] */ +#define MDIO_AN_T1_ADV_H 516 /* BASE-T1 AN advertisement register [47:32] */ +#define MDIO_AN_T1_LP_L 517 /* BASE-T1 AN LP Base Page ability register [15:0] */ +#define MDIO_AN_T1_LP_M 518 /* BASE-T1 AN LP Base Page ability register [31:16] */ +#define MDIO_AN_T1_LP_H 519 /* BASE-T1 AN LP Base Page ability register [47:32] */ +#define MDIO_AN_10BT1_AN_CTRL 526 /* 10BASE-T1 AN control register */ +#define MDIO_AN_10BT1_AN_STAT 527 /* 10BASE-T1 AN status register */ +#define MDIO_PMA_PMD_BT1_CTRL 2100 /* BASE-T1 PMA/PMD control register */ +#define MDIO_PCS_1000BT1_CTRL 2304 /* 1000BASE-T1 PCS control register */ +#define MDIO_PCS_1000BT1_STAT 2305 /* 1000BASE-T1 PCS status register */ /* LASI (Link Alarm Status Interrupt) registers, defined by XENPAK MSA. */ #define MDIO_PMA_LASI_RXCTRL 0x9000 /* RX_ALARM control */ @@ -105,6 +125,7 @@ #define MDIO_STAT1_LPOWERABLE 0x0002 /* Low-power ability */ #define MDIO_STAT1_LSTATUS BMSR_LSTATUS #define MDIO_STAT1_FAULT 0x0080 /* Fault */ +#define MDIO_PCS_STAT1_CLKSTOP_CAP 0x0040 #define MDIO_AN_STAT1_LPABLE 0x0001 /* Link partner AN ability */ #define MDIO_AN_STAT1_ABLE BMSR_ANEGCAPABLE #define MDIO_AN_STAT1_RFAULT BMSR_RFAULT @@ -119,7 +140,11 @@ #define MDIO_PMA_SPEED_1000 0x0010 /* 1000M capable */ #define MDIO_PMA_SPEED_100 0x0020 /* 100M capable */ #define MDIO_PMA_SPEED_10 0x0040 /* 10M capable */ +#define MDIO_PMA_SPEED_2_5G 0x2000 /* 2.5G capable */ +#define MDIO_PMA_SPEED_5G 0x4000 /* 5G capable */ #define MDIO_PCS_SPEED_10P2B 0x0002 /* 10PASS-TS/2BASE-TL capable */ +#define MDIO_PCS_SPEED_2_5G 0x0040 /* 2.5G capable */ +#define MDIO_PCS_SPEED_5G 0x0080 /* 5G capable */ /* Device present registers. */ #define MDIO_DEVS_PRESENT(devad) (1 << (devad)) @@ -155,6 +180,7 @@ #define MDIO_PMA_CTRL2_10BT 0x000f /* 10BASE-T type */ #define MDIO_PMA_CTRL2_2_5GBT 0x0030 /* 2.5GBaseT type */ #define MDIO_PMA_CTRL2_5GBT 0x0031 /* 5GBaseT type */ +#define MDIO_PMA_CTRL2_BASET1 0x003D /* BASE-T1 type */ #define MDIO_PCS_CTRL2_TYPE 0x0003 /* PCS type selection */ #define MDIO_PCS_CTRL2_10GBR 0x0000 /* 10GBASE-R type */ #define MDIO_PCS_CTRL2_10GBX 0x0001 /* 10GBASE-X type */ @@ -208,8 +234,33 @@ #define MDIO_PMA_EXTABLE_1000BKX 0x0040 /* 1000BASE-KX ability */ #define MDIO_PMA_EXTABLE_100BTX 0x0080 /* 100BASE-TX ability */ #define MDIO_PMA_EXTABLE_10BT 0x0100 /* 10BASE-T ability */ +#define MDIO_PMA_EXTABLE_BT1 0x0800 /* BASE-T1 ability */ #define MDIO_PMA_EXTABLE_NBT 0x4000 /* 2.5/5GBASE-T ability */ +/* AN Clause 73 linkword */ +#define MDIO_AN_C73_0_S_MASK GENMASK(4, 0) +#define MDIO_AN_C73_0_E_MASK GENMASK(9, 5) +#define MDIO_AN_C73_0_PAUSE BIT(10) +#define MDIO_AN_C73_0_ASM_DIR BIT(11) +#define MDIO_AN_C73_0_C2 BIT(12) +#define MDIO_AN_C73_0_RF BIT(13) +#define MDIO_AN_C73_0_ACK BIT(14) +#define MDIO_AN_C73_0_NP BIT(15) +#define MDIO_AN_C73_1_T_MASK GENMASK(4, 0) +#define MDIO_AN_C73_1_1000BASE_KX BIT(5) +#define MDIO_AN_C73_1_10GBASE_KX4 BIT(6) +#define MDIO_AN_C73_1_10GBASE_KR BIT(7) +#define MDIO_AN_C73_1_40GBASE_KR4 BIT(8) +#define MDIO_AN_C73_1_40GBASE_CR4 BIT(9) +#define MDIO_AN_C73_1_100GBASE_CR10 BIT(10) +#define MDIO_AN_C73_1_100GBASE_KP4 BIT(11) +#define MDIO_AN_C73_1_100GBASE_KR4 BIT(12) +#define MDIO_AN_C73_1_100GBASE_CR4 BIT(13) +#define MDIO_AN_C73_1_25GBASE_R_S BIT(14) +#define MDIO_AN_C73_1_25GBASE_R BIT(15) +#define MDIO_AN_C73_2_2500BASE_KX BIT(0) +#define MDIO_AN_C73_2_5GBASE_KR BIT(1) + /* PHY XGXS lane state register. */ #define MDIO_PHYXS_LNSTAT_SYNC0 0x0001 #define MDIO_PHYXS_LNSTAT_SYNC1 0x0002 @@ -237,6 +288,9 @@ #define MDIO_PMA_10GBR_FECABLE_ABLE 0x0001 /* FEC ability */ #define MDIO_PMA_10GBR_FECABLE_ERRABLE 0x0002 /* FEC error indic. ability */ +/* PMA 10GBASE-R Fast Retrain status and control register. */ +#define MDIO_PMA_10GBR_FSRT_ENABLE 0x0001 /* Fast retrain enable */ + /* PCS 10GBASE-R/-T status register 1. */ #define MDIO_PCS_10GBRT_STAT1_BLKLK 0x0001 /* Block lock attained */ @@ -245,6 +299,7 @@ #define MDIO_PCS_10GBRT_STAT2_BER 0x3f00 /* AN 10GBASE-T control register. */ +#define MDIO_AN_10GBT_CTRL_ADVFSRT2_5G 0x0020 /* Advertise 2.5GBASE-T fast retrain */ #define MDIO_AN_10GBT_CTRL_ADV2_5G 0x0080 /* Advertise 2.5GBASE-T */ #define MDIO_AN_10GBT_CTRL_ADV5G 0x0100 /* Advertise 5GBASE-T */ #define MDIO_AN_10GBT_CTRL_ADV10G 0x1000 /* Advertise 10GBASE-T */ @@ -260,6 +315,88 @@ #define MDIO_AN_10GBT_STAT_MS 0x4000 /* Master/slave config */ #define MDIO_AN_10GBT_STAT_MSFLT 0x8000 /* Master/slave config fault */ +/* 10BASE-T1L PMA control */ +#define MDIO_PMA_10T1L_CTRL_LB_EN 0x0001 /* Enable loopback mode */ +#define MDIO_PMA_10T1L_CTRL_EEE_EN 0x0400 /* Enable EEE mode */ +#define MDIO_PMA_10T1L_CTRL_LOW_POWER 0x0800 /* Low-power mode */ +#define MDIO_PMA_10T1L_CTRL_2V4_EN 0x1000 /* Enable 2.4 Vpp operating mode */ +#define MDIO_PMA_10T1L_CTRL_TX_DIS 0x4000 /* Transmit disable */ +#define MDIO_PMA_10T1L_CTRL_PMA_RST 0x8000 /* MA reset */ + +/* 10BASE-T1L PMA status register. */ +#define MDIO_PMA_10T1L_STAT_LINK 0x0001 /* PMA receive link up */ +#define MDIO_PMA_10T1L_STAT_FAULT 0x0002 /* Fault condition detected */ +#define MDIO_PMA_10T1L_STAT_POLARITY 0x0004 /* Receive polarity is reversed */ +#define MDIO_PMA_10T1L_STAT_RECV_FAULT 0x0200 /* Able to detect fault on receive path */ +#define MDIO_PMA_10T1L_STAT_EEE 0x0400 /* PHY has EEE ability */ +#define MDIO_PMA_10T1L_STAT_LOW_POWER 0x0800 /* PMA has low-power ability */ +#define MDIO_PMA_10T1L_STAT_2V4_ABLE 0x1000 /* PHY has 2.4 Vpp operating mode ability */ +#define MDIO_PMA_10T1L_STAT_LB_ABLE 0x2000 /* PHY has loopback ability */ + +/* 10BASE-T1L PCS control register. */ +#define MDIO_PCS_10T1L_CTRL_LB 0x4000 /* Enable PCS level loopback mode */ +#define MDIO_PCS_10T1L_CTRL_RESET 0x8000 /* PCS reset */ + +/* BASE-T1 PMA/PMD extended ability register. */ +#define MDIO_PMA_PMD_BT1_B100_ABLE 0x0001 /* 100BASE-T1 Ability */ +#define MDIO_PMA_PMD_BT1_B1000_ABLE 0x0002 /* 1000BASE-T1 Ability */ +#define MDIO_PMA_PMD_BT1_B10L_ABLE 0x0004 /* 10BASE-T1L Ability */ + +/* BASE-T1 auto-negotiation advertisement register [15:0] */ +#define MDIO_AN_T1_ADV_L_PAUSE_CAP ADVERTISE_PAUSE_CAP +#define MDIO_AN_T1_ADV_L_PAUSE_ASYM ADVERTISE_PAUSE_ASYM +#define MDIO_AN_T1_ADV_L_FORCE_MS 0x1000 /* Force Master/slave Configuration */ +#define MDIO_AN_T1_ADV_L_REMOTE_FAULT ADVERTISE_RFAULT +#define MDIO_AN_T1_ADV_L_ACK ADVERTISE_LPACK +#define MDIO_AN_T1_ADV_L_NEXT_PAGE_REQ ADVERTISE_NPAGE + +/* BASE-T1 auto-negotiation advertisement register [31:16] */ +#define MDIO_AN_T1_ADV_M_B10L 0x4000 /* device is compatible with 10BASE-T1L */ +#define MDIO_AN_T1_ADV_M_1000BT1 0x0080 /* advertise 1000BASE-T1 */ +#define MDIO_AN_T1_ADV_M_100BT1 0x0020 /* advertise 100BASE-T1 */ +#define MDIO_AN_T1_ADV_M_MST 0x0010 /* advertise master preference */ + +/* BASE-T1 auto-negotiation advertisement register [47:32] */ +#define MDIO_AN_T1_ADV_H_10L_TX_HI_REQ 0x1000 /* 10BASE-T1L High Level Transmit Request */ +#define MDIO_AN_T1_ADV_H_10L_TX_HI 0x2000 /* 10BASE-T1L High Level Transmit Ability */ + +/* BASE-T1 AN LP Base Page ability register [15:0] */ +#define MDIO_AN_T1_LP_L_PAUSE_CAP LPA_PAUSE_CAP +#define MDIO_AN_T1_LP_L_PAUSE_ASYM LPA_PAUSE_ASYM +#define MDIO_AN_T1_LP_L_FORCE_MS 0x1000 /* LP Force Master/slave Configuration */ +#define MDIO_AN_T1_LP_L_REMOTE_FAULT LPA_RFAULT +#define MDIO_AN_T1_LP_L_ACK LPA_LPACK +#define MDIO_AN_T1_LP_L_NEXT_PAGE_REQ LPA_NPAGE + +/* BASE-T1 AN LP Base Page ability register [31:16] */ +#define MDIO_AN_T1_LP_M_MST 0x0010 /* LP master preference */ +#define MDIO_AN_T1_LP_M_B10L 0x4000 /* LP is compatible with 10BASE-T1L */ + +/* BASE-T1 AN LP Base Page ability register [47:32] */ +#define MDIO_AN_T1_LP_H_10L_TX_HI_REQ 0x1000 /* 10BASE-T1L High Level LP Transmit Request */ +#define MDIO_AN_T1_LP_H_10L_TX_HI 0x2000 /* 10BASE-T1L High Level LP Transmit Ability */ + +/* 10BASE-T1 AN control register */ +#define MDIO_AN_10BT1_AN_CTRL_ADV_EEE_T1L 0x4000 /* 10BASE-T1L EEE ability advertisement */ + +/* 10BASE-T1 AN status register */ +#define MDIO_AN_10BT1_AN_STAT_LPA_EEE_T1L 0x4000 /* 10BASE-T1L LP EEE ability advertisement */ + +/* BASE-T1 PMA/PMD control register */ +#define MDIO_PMA_PMD_BT1_CTRL_STRAP 0x000F /* Type selection (Strap) */ +#define MDIO_PMA_PMD_BT1_CTRL_STRAP_B1000 0x0001 /* Select 1000BASE-T1 */ +#define MDIO_PMA_PMD_BT1_CTRL_CFG_MST 0x4000 /* MASTER-SLAVE config value */ + +/* 1000BASE-T1 PCS control register */ +#define MDIO_PCS_1000BT1_CTRL_LOW_POWER 0x0800 /* Low power mode */ +#define MDIO_PCS_1000BT1_CTRL_DISABLE_TX 0x4000 /* Global PMA transmit disable */ +#define MDIO_PCS_1000BT1_CTRL_RESET 0x8000 /* Software reset value */ + +/* 1000BASE-T1 PCS status register */ +#define MDIO_PCS_1000BT1_STAT_LINK 0x0004 /* PCS Link is up */ +#define MDIO_PCS_1000BT1_STAT_FAULT 0x0080 /* There is a fault condition */ + + /* EEE Supported/Advertisement/LP Advertisement registers. * * EEE capability Register (3.20), Advertisement (7.60) and @@ -287,6 +424,9 @@ #define MDIO_EEE_2_5GT 0x0001 /* 2.5GT EEE cap */ #define MDIO_EEE_5GT 0x0002 /* 5GT EEE cap */ +/* AN MultiGBASE-T AN control 2 */ +#define MDIO_AN_THP_BP2_5GT 0x0008 /* 2.5GT THP bypass request */ + /* 2.5G/5G Extended abilities register. */ #define MDIO_PMA_NG_EXTABLE_2_5GBT 0x0001 /* 2.5GBASET ability */ #define MDIO_PMA_NG_EXTABLE_5GBT 0x0002 /* 5GBASET ability */ |