aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/sound/soc/samsung/s3c24xx_simtec.c
diff options
context:
space:
mode:
Diffstat (limited to 'sound/soc/samsung/s3c24xx_simtec.c')
-rw-r--r--sound/soc/samsung/s3c24xx_simtec.c367
1 files changed, 0 insertions, 367 deletions
diff --git a/sound/soc/samsung/s3c24xx_simtec.c b/sound/soc/samsung/s3c24xx_simtec.c
deleted file mode 100644
index 3cddd11344ac..000000000000
--- a/sound/soc/samsung/s3c24xx_simtec.c
+++ /dev/null
@@ -1,367 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2009 Simtec Electronics
-
-#include <linux/gpio.h>
-#include <linux/clk.h>
-#include <linux/module.h>
-
-#include <sound/soc.h>
-
-#include <linux/platform_data/asoc-s3c24xx_simtec.h>
-
-#include "s3c24xx-i2s.h"
-#include "s3c24xx_simtec.h"
-
-static struct s3c24xx_audio_simtec_pdata *pdata;
-static struct clk *xtal_clk;
-
-static int spk_gain;
-static int spk_unmute;
-
-/**
- * speaker_gain_get - read the speaker gain setting.
- * @kcontrol: The control for the speaker gain.
- * @ucontrol: The value that needs to be updated.
- *
- * Read the value for the AMP gain control.
- */
-static int speaker_gain_get(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- ucontrol->value.integer.value[0] = spk_gain;
- return 0;
-}
-
-/**
- * speaker_gain_set - set the value of the speaker amp gain
- * @value: The value to write.
- */
-static void speaker_gain_set(int value)
-{
- gpio_set_value_cansleep(pdata->amp_gain[0], value & 1);
- gpio_set_value_cansleep(pdata->amp_gain[1], value >> 1);
-}
-
-/**
- * speaker_gain_put - set the speaker gain setting.
- * @kcontrol: The control for the speaker gain.
- * @ucontrol: The value that needs to be set.
- *
- * Set the value of the speaker gain from the specified
- * @ucontrol setting.
- *
- * Note, if the speaker amp is muted, then we do not set a gain value
- * as at-least one of the ICs that is fitted will try and power up even
- * if the main control is set to off.
- */
-static int speaker_gain_put(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- int value = ucontrol->value.integer.value[0];
-
- spk_gain = value;
-
- if (!spk_unmute)
- speaker_gain_set(value);
-
- return 0;
-}
-
-static const struct snd_kcontrol_new amp_gain_controls[] = {
- SOC_SINGLE_EXT("Speaker Gain", 0, 0, 3, 0,
- speaker_gain_get, speaker_gain_put),
-};
-
-/**
- * spk_unmute_state - set the unmute state of the speaker
- * @to: zero to unmute, non-zero to ununmute.
- */
-static void spk_unmute_state(int to)
-{
- pr_debug("%s: to=%d\n", __func__, to);
-
- spk_unmute = to;
- gpio_set_value(pdata->amp_gpio, to);
-
- /* if we're umuting, also re-set the gain */
- if (to && pdata->amp_gain[0] > 0)
- speaker_gain_set(spk_gain);
-}
-
-/**
- * speaker_unmute_get - read the speaker unmute setting.
- * @kcontrol: The control for the speaker gain.
- * @ucontrol: The value that needs to be updated.
- *
- * Read the value for the AMP gain control.
- */
-static int speaker_unmute_get(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- ucontrol->value.integer.value[0] = spk_unmute;
- return 0;
-}
-
-/**
- * speaker_unmute_put - set the speaker unmute setting.
- * @kcontrol: The control for the speaker gain.
- * @ucontrol: The value that needs to be set.
- *
- * Set the value of the speaker gain from the specified
- * @ucontrol setting.
- */
-static int speaker_unmute_put(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- spk_unmute_state(ucontrol->value.integer.value[0]);
- return 0;
-}
-
-/* This is added as a manual control as the speaker amps create clicks
- * when their power state is changed, which are far more noticeable than
- * anything produced by the CODEC itself.
- */
-static const struct snd_kcontrol_new amp_unmute_controls[] = {
- SOC_SINGLE_EXT("Speaker Switch", 0, 0, 1, 0,
- speaker_unmute_get, speaker_unmute_put),
-};
-
-void simtec_audio_init(struct snd_soc_pcm_runtime *rtd)
-{
- struct snd_soc_card *card = rtd->card;
-
- if (pdata->amp_gpio > 0) {
- pr_debug("%s: adding amp routes\n", __func__);
-
- snd_soc_add_card_controls(card, amp_unmute_controls,
- ARRAY_SIZE(amp_unmute_controls));
- }
-
- if (pdata->amp_gain[0] > 0) {
- pr_debug("%s: adding amp controls\n", __func__);
- snd_soc_add_card_controls(card, amp_gain_controls,
- ARRAY_SIZE(amp_gain_controls));
- }
-}
-EXPORT_SYMBOL_GPL(simtec_audio_init);
-
-#define CODEC_CLOCK 12000000
-
-/**
- * simtec_hw_params - update hardware parameters
- * @substream: The audio substream instance.
- * @params: The parameters requested.
- *
- * Update the codec data routing and configuration settings
- * from the supplied data.
- */
-static int simtec_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
-{
- struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
- struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
- struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
- int ret;
-
- ret = snd_soc_dai_set_sysclk(codec_dai, 0,
- CODEC_CLOCK, SND_SOC_CLOCK_IN);
- if (ret) {
- pr_err( "%s: failed setting codec sysclk\n", __func__);
- return ret;
- }
-
- if (pdata->use_mpllin) {
- ret = snd_soc_dai_set_sysclk(cpu_dai, S3C24XX_CLKSRC_MPLL,
- 0, SND_SOC_CLOCK_OUT);
-
- if (ret) {
- pr_err("%s: failed to set MPLLin as clksrc\n",
- __func__);
- return ret;
- }
- }
-
- if (pdata->output_cdclk) {
- int cdclk_scale;
-
- cdclk_scale = clk_get_rate(xtal_clk) / CODEC_CLOCK;
- cdclk_scale--;
-
- ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_PRESCALER,
- cdclk_scale);
- }
-
- return 0;
-}
-
-static int simtec_call_startup(struct s3c24xx_audio_simtec_pdata *pd)
-{
- /* call any board supplied startup code, this currently only
- * covers the bast/vr1000 which have a CPLD in the way of the
- * LRCLK */
- if (pd->startup)
- pd->startup();
-
- return 0;
-}
-
-static const struct snd_soc_ops simtec_snd_ops = {
- .hw_params = simtec_hw_params,
-};
-
-/**
- * attach_gpio_amp - get and configure the necessary gpios
- * @dev: The device we're probing.
- * @pd: The platform data supplied by the board.
- *
- * If there is a GPIO based amplifier attached to the board, claim
- * the necessary GPIO lines for it, and set default values.
- */
-static int attach_gpio_amp(struct device *dev,
- struct s3c24xx_audio_simtec_pdata *pd)
-{
- int ret;
-
- /* attach gpio amp gain (if any) */
- if (pdata->amp_gain[0] > 0) {
- ret = gpio_request(pd->amp_gain[0], "gpio-amp-gain0");
- if (ret) {
- dev_err(dev, "cannot get amp gpio gain0\n");
- return ret;
- }
-
- ret = gpio_request(pd->amp_gain[1], "gpio-amp-gain1");
- if (ret) {
- dev_err(dev, "cannot get amp gpio gain1\n");
- gpio_free(pdata->amp_gain[0]);
- return ret;
- }
-
- gpio_direction_output(pd->amp_gain[0], 0);
- gpio_direction_output(pd->amp_gain[1], 0);
- }
-
- /* note, currently we assume GPA0 isn't valid amp */
- if (pdata->amp_gpio > 0) {
- ret = gpio_request(pd->amp_gpio, "gpio-amp");
- if (ret) {
- dev_err(dev, "cannot get amp gpio %d (%d)\n",
- pd->amp_gpio, ret);
- goto err_amp;
- }
-
- /* set the amp off at startup */
- spk_unmute_state(0);
- }
-
- return 0;
-
-err_amp:
- if (pd->amp_gain[0] > 0) {
- gpio_free(pd->amp_gain[0]);
- gpio_free(pd->amp_gain[1]);
- }
-
- return ret;
-}
-
-static void detach_gpio_amp(struct s3c24xx_audio_simtec_pdata *pd)
-{
- if (pd->amp_gain[0] > 0) {
- gpio_free(pd->amp_gain[0]);
- gpio_free(pd->amp_gain[1]);
- }
-
- if (pd->amp_gpio > 0)
- gpio_free(pd->amp_gpio);
-}
-
-#ifdef CONFIG_PM
-static int simtec_audio_resume(struct device *dev)
-{
- simtec_call_startup(pdata);
- return 0;
-}
-
-const struct dev_pm_ops simtec_audio_pmops = {
- .resume = simtec_audio_resume,
-};
-EXPORT_SYMBOL_GPL(simtec_audio_pmops);
-#endif
-
-int simtec_audio_core_probe(struct platform_device *pdev,
- struct snd_soc_card *card)
-{
- struct platform_device *snd_dev;
- int ret;
-
- card->dai_link->ops = &simtec_snd_ops;
- card->dai_link->dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
- SND_SOC_DAIFMT_CBM_CFM;
-
- pdata = pdev->dev.platform_data;
- if (!pdata) {
- dev_err(&pdev->dev, "no platform data supplied\n");
- return -EINVAL;
- }
-
- simtec_call_startup(pdata);
-
- xtal_clk = clk_get(&pdev->dev, "xtal");
- if (IS_ERR(xtal_clk)) {
- dev_err(&pdev->dev, "could not get clkout0\n");
- return -EINVAL;
- }
-
- dev_info(&pdev->dev, "xtal rate is %ld\n", clk_get_rate(xtal_clk));
-
- ret = attach_gpio_amp(&pdev->dev, pdata);
- if (ret)
- goto err_clk;
-
- snd_dev = platform_device_alloc("soc-audio", -1);
- if (!snd_dev) {
- dev_err(&pdev->dev, "failed to alloc soc-audio devicec\n");
- ret = -ENOMEM;
- goto err_gpio;
- }
-
- platform_set_drvdata(snd_dev, card);
-
- ret = platform_device_add(snd_dev);
- if (ret) {
- dev_err(&pdev->dev, "failed to add soc-audio dev\n");
- goto err_pdev;
- }
-
- platform_set_drvdata(pdev, snd_dev);
- return 0;
-
-err_pdev:
- platform_device_put(snd_dev);
-
-err_gpio:
- detach_gpio_amp(pdata);
-
-err_clk:
- clk_put(xtal_clk);
- return ret;
-}
-EXPORT_SYMBOL_GPL(simtec_audio_core_probe);
-
-int simtec_audio_remove(struct platform_device *pdev)
-{
- struct platform_device *snd_dev = platform_get_drvdata(pdev);
-
- platform_device_unregister(snd_dev);
-
- detach_gpio_amp(pdata);
- clk_put(xtal_clk);
- return 0;
-}
-EXPORT_SYMBOL_GPL(simtec_audio_remove);
-
-MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
-MODULE_DESCRIPTION("ALSA SoC Simtec Audio common support");
-MODULE_LICENSE("GPL");
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.