diff options
Diffstat (limited to 'sound/soc/tegra/Kconfig')
-rw-r--r-- | sound/soc/tegra/Kconfig | 142 |
1 files changed, 121 insertions, 21 deletions
diff --git a/sound/soc/tegra/Kconfig b/sound/soc/tegra/Kconfig index 3d91bd3e59cd..74effc57a7a0 100644 --- a/sound/soc/tegra/Kconfig +++ b/sound/soc/tegra/Kconfig @@ -9,9 +9,10 @@ config SND_SOC_TEGRA help Say Y or M here if you want support for SoC audio on Tegra. +if SND_SOC_TEGRA + config SND_SOC_TEGRA20_AC97 tristate "Tegra20 AC97 interface" - depends on SND_SOC_TEGRA select SND_SOC_AC97_BUS select SND_SOC_TEGRA20_DAS help @@ -21,7 +22,6 @@ config SND_SOC_TEGRA20_AC97 config SND_SOC_TEGRA20_DAS tristate "Tegra20 DAS module" - depends on SND_SOC_TEGRA help Say Y or M if you want to add support for the Tegra20 DAS module. You will also need to select the individual machine drivers to @@ -29,7 +29,6 @@ config SND_SOC_TEGRA20_DAS config SND_SOC_TEGRA20_I2S tristate "Tegra20 I2S interface" - depends on SND_SOC_TEGRA select SND_SOC_TEGRA20_DAS help Say Y or M if you want to add support for codecs attached to the @@ -38,8 +37,6 @@ config SND_SOC_TEGRA20_I2S config SND_SOC_TEGRA20_SPDIF tristate "Tegra20 SPDIF interface" - depends on SND_SOC_TEGRA - default m help Say Y or M if you want to add support for the Tegra20 SPDIF interface. You will also need to select the individual machine drivers to support @@ -47,7 +44,6 @@ config SND_SOC_TEGRA20_SPDIF config SND_SOC_TEGRA30_AHUB tristate "Tegra30 AHUB module" - depends on SND_SOC_TEGRA help Say Y or M if you want to add support for the Tegra30 AHUB module. You will also need to select the individual machine drivers to @@ -55,7 +51,6 @@ config SND_SOC_TEGRA30_AHUB config SND_SOC_TEGRA30_I2S tristate "Tegra30 I2S interface" - depends on SND_SOC_TEGRA select SND_SOC_TEGRA30_AHUB help Say Y or M if you want to add support for codecs attached to the @@ -64,7 +59,6 @@ config SND_SOC_TEGRA30_I2S config SND_SOC_TEGRA210_AHUB tristate "Tegra210 AHUB module" - depends on SND_SOC_TEGRA help Config to enable Audio Hub (AHUB) module, which comprises of a switch called Audio Crossbar (AXBAR) used to configure or modify @@ -74,7 +68,6 @@ config SND_SOC_TEGRA210_AHUB config SND_SOC_TEGRA210_DMIC tristate "Tegra210 DMIC module" - depends on SND_SOC_TEGRA help Config to enable the Digital MIC (DMIC) controller which is used to interface with Pulse Density Modulation (PDM) input devices. @@ -85,7 +78,6 @@ config SND_SOC_TEGRA210_DMIC config SND_SOC_TEGRA210_I2S tristate "Tegra210 I2S module" - depends on SND_SOC_TEGRA help Config to enable the Inter-IC Sound (I2S) Controller which implements full-duplex and bidirectional and single direction @@ -93,9 +85,29 @@ config SND_SOC_TEGRA210_I2S compatible devices. Say Y or M if you want to add support for Tegra210 I2S module. +config SND_SOC_TEGRA210_OPE + tristate "Tegra210 OPE module" + help + Config to enable the Output Processing Engine (OPE) which includes + Parametric Equalizer (PEQ) and Multi Band Dynamic Range Compressor + (MBDRC) sub blocks for data processing. It can support up to 8 + channels. + Say Y or M if you want to add support for Tegra210 OPE module. + +config SND_SOC_TEGRA186_ASRC + tristate "Tegra186 ASRC module" + help + Config to enable the Asynchronous Sample Rate Converter (ASRC), + which converts the sampling frequency of the input signal from + one frequency to another. It can handle over a wide range of + sample rate ratios (freq_in/freq_out) from 1:24 to 24:1. + ASRC has two modes of operation. One where ratio can be programmed + in SW and the other where it gets information from ratio estimator + module. + Say Y or M if you want to add support for Tegra186 ASRC module. + config SND_SOC_TEGRA186_DSPK tristate "Tegra186 DSPK module" - depends on SND_SOC_TEGRA help Config to enable the Digital Speaker Controller (DSPK) which converts the multi-bit Pulse Code Modulation (PCM) audio input to @@ -108,7 +120,6 @@ config SND_SOC_TEGRA186_DSPK config SND_SOC_TEGRA210_ADMAIF tristate "Tegra210 ADMAIF module" - depends on SND_SOC_TEGRA help Config to enable ADMAIF which is the interface between ADMA and Audio Hub (AHUB). Each ADMA channel that sends/receives data to/ @@ -118,9 +129,79 @@ config SND_SOC_TEGRA210_ADMAIF channel. Buffer size is configurable for each ADMAIIF channel. Say Y or M if you want to add support for Tegra210 ADMAIF module. +config SND_SOC_TEGRA210_MVC + tristate "Tegra210 MVC module" + help + Config to enable the digital Master Volume Controller (MVC) which + provides gain or attenuation to a digital signal path. It can be + used in input or output signal path. It can be used either for + per-stream volume control or for master volume control. + Say Y or M if you want to add support for Tegra210 MVC module. + +config SND_SOC_TEGRA210_SFC + tristate "Tegra210 SFC module" + help + Config to enable the Sampling Frequency Converter (SFC) which + converts the sampling frequency of input signal to another + frequency. It supports sampling frequency conversion of streams + up to 2 channels (stereo). + Say Y or M if you want to add support for Tegra210 SFC module. + +config SND_SOC_TEGRA210_AMX + tristate "Tegra210 AMX module" + help + Config to enable the Audio Multiplexer (AMX) which can multiplex + four input streams (each of up to 16 channels) and generate + output stream (of up to 16 channels). A byte RAM helps to form an + output frame by any combination of bytes from the input frames. + Say Y or M if you want to add support for Tegra210 AMX module. + +config SND_SOC_TEGRA210_ADX + tristate "Tegra210 ADX module" + help + Config to enable the Audio Demultiplexer (ADX) which takes an + input stream (up to 16 channels) and demultiplexes it into four + output streams (each of up to 16 channels). A byte RAM helps to + form output frames by any combination of bytes from the input + frame. Its design is identical to that of byte RAM in the AMX + except that the data flow direction is reversed. + Say Y or M if you want to add support for Tegra210 ADX module. + +config SND_SOC_TEGRA210_MIXER + tristate "Tegra210 Mixer module" + help + Config to enable the Mixer module which can help to mix multiple + audio streams. It supports mixing of up to 10 input streams, + where each stream can contain maximum of 8 channels. It supports + 5 output each of which can be a mix of any combination of 10 + input streams. + Say Y or M if you want to add support for Tegra210 Mixer module. + +config SND_SOC_TEGRA_AUDIO_GRAPH_CARD + tristate "Audio Graph Card based Tegra driver" + depends on SND_AUDIO_GRAPH_CARD + help + Config to enable Tegra audio machine driver based on generic + audio graph driver. It is a thin driver written to customize + few things for Tegra audio. Most of the code is re-used from + audio graph driver and the same DT bindings are used. + +config SND_SOC_TEGRA_MACHINE_DRV + tristate + +config SND_SOC_TEGRA_RT5631 + tristate "SoC Audio support for Tegra boards using an RT5631 codec" + depends on SND_SOC_TEGRA && I2C && GPIOLIB + select SND_SOC_TEGRA_MACHINE_DRV + select SND_SOC_RT5631 + help + Say Y or M here if you want to add support for SoC audio on Tegra + boards using the RT5631 codec, such as Transformer. + config SND_SOC_TEGRA_RT5640 tristate "SoC Audio support for Tegra boards using an RT5640 codec" - depends on SND_SOC_TEGRA && I2C && GPIOLIB + depends on I2C && GPIOLIB + select SND_SOC_TEGRA_MACHINE_DRV select SND_SOC_RT5640 help Say Y or M here if you want to add support for SoC audio on Tegra @@ -128,7 +209,8 @@ config SND_SOC_TEGRA_RT5640 config SND_SOC_TEGRA_WM8753 tristate "SoC Audio support for Tegra boards using a WM8753 codec" - depends on SND_SOC_TEGRA && I2C && GPIOLIB + depends on I2C && GPIOLIB + select SND_SOC_TEGRA_MACHINE_DRV select SND_SOC_WM8753 help Say Y or M here if you want to add support for SoC audio on Tegra @@ -136,7 +218,8 @@ config SND_SOC_TEGRA_WM8753 config SND_SOC_TEGRA_WM8903 tristate "SoC Audio support for Tegra boards using a WM8903 codec" - depends on SND_SOC_TEGRA && I2C && GPIOLIB + depends on I2C && GPIOLIB + select SND_SOC_TEGRA_MACHINE_DRV select SND_SOC_WM8903 help Say Y or M here if you want to add support for SoC audio on Tegra @@ -145,7 +228,8 @@ config SND_SOC_TEGRA_WM8903 config SND_SOC_TEGRA_WM9712 tristate "SoC Audio support for Tegra boards using a WM9712 codec" - depends on SND_SOC_TEGRA && GPIOLIB + depends on GPIOLIB + select SND_SOC_TEGRA_MACHINE_DRV select SND_SOC_TEGRA20_AC97 select SND_SOC_WM9712 help @@ -154,7 +238,8 @@ config SND_SOC_TEGRA_WM9712 config SND_SOC_TEGRA_TRIMSLICE tristate "SoC Audio support for TrimSlice board" - depends on SND_SOC_TEGRA && I2C + depends on I2C + select SND_SOC_TEGRA_MACHINE_DRV select SND_SOC_TLV320AIC23_I2C help Say Y or M here if you want to add support for SoC audio on the @@ -162,7 +247,8 @@ config SND_SOC_TEGRA_TRIMSLICE config SND_SOC_TEGRA_ALC5632 tristate "SoC Audio support for Tegra boards using an ALC5632 codec" - depends on SND_SOC_TEGRA && I2C && GPIOLIB + depends on I2C && GPIOLIB + select SND_SOC_TEGRA_MACHINE_DRV select SND_SOC_ALC5632 help Say Y or M here if you want to add support for SoC audio on the @@ -170,15 +256,26 @@ config SND_SOC_TEGRA_ALC5632 config SND_SOC_TEGRA_MAX98090 tristate "SoC Audio support for Tegra boards using a MAX98090 codec" - depends on SND_SOC_TEGRA && I2C && GPIOLIB + depends on I2C && GPIOLIB + select SND_SOC_TEGRA_MACHINE_DRV select SND_SOC_MAX98090 help Say Y or M here if you want to add support for SoC audio on Tegra boards using the MAX98090 codec, such as Venice2. +config SND_SOC_TEGRA_MAX98088 + tristate "SoC Audio support for Tegra boards using a MAX9808x codec" + depends on I2C && GPIOLIB + select SND_SOC_TEGRA_MACHINE_DRV + select SND_SOC_MAX98088 + help + Say Y or M here if you want to add support for SoC audio on Tegra + boards using the MAX98088 codec, such as LG X3. + config SND_SOC_TEGRA_RT5677 tristate "SoC Audio support for Tegra boards using a RT5677 codec" - depends on SND_SOC_TEGRA && I2C && GPIOLIB + depends on I2C && GPIOLIB + select SND_SOC_TEGRA_MACHINE_DRV select SND_SOC_RT5677 help Say Y or M here if you want to add support for SoC audio on Tegra @@ -186,9 +283,12 @@ config SND_SOC_TEGRA_RT5677 config SND_SOC_TEGRA_SGTL5000 tristate "SoC Audio support for Tegra boards using a SGTL5000 codec" - depends on SND_SOC_TEGRA && I2C && GPIOLIB + depends on I2C && GPIOLIB + select SND_SOC_TEGRA_MACHINE_DRV select SND_SOC_SGTL5000 help Say Y or M here if you want to add support for SoC audio on Tegra boards using the SGTL5000 codec, such as Apalis T30, Apalis TK1 or Colibri T30. + +endif |