diff options
Diffstat (limited to 'tools/testing/selftests/cgroup/test_cpuset_prs.sh')
| -rwxr-xr-x | tools/testing/selftests/cgroup/test_cpuset_prs.sh | 1193 |
1 files changed, 1193 insertions, 0 deletions
diff --git a/tools/testing/selftests/cgroup/test_cpuset_prs.sh b/tools/testing/selftests/cgroup/test_cpuset_prs.sh new file mode 100755 index 000000000000..a17256d9f88a --- /dev/null +++ b/tools/testing/selftests/cgroup/test_cpuset_prs.sh @@ -0,0 +1,1193 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test for cpuset v2 partition root state (PRS) +# +# The sched verbose flag can be optionally set so that the console log +# can be examined for the correct setting of scheduling domain. +# + +skip_test() { + echo "$1" + echo "Test SKIPPED" + exit 4 # ksft_skip +} + +[[ $(id -u) -eq 0 ]] || skip_test "Test must be run as root!" + + +# Get wait_inotify location +WAIT_INOTIFY=$(cd $(dirname $0); pwd)/wait_inotify + +# Find cgroup v2 mount point +CGROUP2=$(mount -t cgroup2 | head -1 | awk -e '{print $3}') +[[ -n "$CGROUP2" ]] || skip_test "Cgroup v2 mount point not found!" +SUBPARTS_CPUS=$CGROUP2/.__DEBUG__.cpuset.cpus.subpartitions +CPULIST=$(cat $CGROUP2/cpuset.cpus.effective) + +NR_CPUS=$(lscpu | grep "^CPU(s):" | sed -e "s/.*:[[:space:]]*//") +[[ $NR_CPUS -lt 8 ]] && skip_test "Test needs at least 8 cpus available!" + +# Check to see if /dev/console exists and is writable +if [[ -c /dev/console && -w /dev/console ]] +then + CONSOLE=/dev/console +else + CONSOLE=/dev/null +fi + +# Set verbose flag and delay factor +PROG=$1 +VERBOSE=0 +DELAY_FACTOR=1 +SCHED_DEBUG= +while [[ "$1" = -* ]] +do + case "$1" in + -v) ((VERBOSE++)) + # Enable sched/verbose can slow thing down + [[ $DELAY_FACTOR -eq 1 ]] && + DELAY_FACTOR=2 + ;; + -d) DELAY_FACTOR=$2 + shift + ;; + *) echo "Usage: $PROG [-v] [-d <delay-factor>" + exit + ;; + esac + shift +done + +# Set sched verbose flag if available when "-v" option is specified +if [[ $VERBOSE -gt 0 && -d /sys/kernel/debug/sched ]] +then + # Used to restore the original setting during cleanup + SCHED_DEBUG=$(cat /sys/kernel/debug/sched/verbose) + echo Y > /sys/kernel/debug/sched/verbose +fi + +cd $CGROUP2 +echo +cpuset > cgroup.subtree_control + +# +# If cpuset has been set up and used in child cgroups, we may not be able to +# create partition under root cgroup because of the CPU exclusivity rule. +# So we are going to skip the test if this is the case. +# +[[ -d test ]] || mkdir test +echo 0-6 > test/cpuset.cpus +echo root > test/cpuset.cpus.partition +cat test/cpuset.cpus.partition | grep -q invalid +RESULT=$? +echo member > test/cpuset.cpus.partition +echo "" > test/cpuset.cpus +[[ $RESULT -eq 0 ]] && skip_test "Child cgroups are using cpuset!" + +# +# If isolated CPUs have been reserved at boot time (as shown in +# cpuset.cpus.isolated), these isolated CPUs should be outside of CPUs 0-8 +# that will be used by this script for testing purpose. If not, some of +# the tests may fail incorrectly. Wait a bit and retry again just in case +# these isolated CPUs are leftover from previous run and have just been +# cleaned up earlier in this script. +# +# These pre-isolated CPUs should stay in an isolated state throughout the +# testing process for now. +# +BOOT_ISOLCPUS=$(cat $CGROUP2/cpuset.cpus.isolated) +[[ -n "$BOOT_ISOLCPUS" ]] && { + sleep 0.5 + BOOT_ISOLCPUS=$(cat $CGROUP2/cpuset.cpus.isolated) +} +if [[ -n "$BOOT_ISOLCPUS" ]] +then + [[ $(echo $BOOT_ISOLCPUS | sed -e "s/[,-].*//") -le 8 ]] && + skip_test "Pre-isolated CPUs ($BOOT_ISOLCPUS) overlap CPUs to be tested" + echo "Pre-isolated CPUs: $BOOT_ISOLCPUS" +fi + +cleanup() +{ + online_cpus + cd $CGROUP2 + rmdir A1/A2/A3 A1/A2 A1 B1 test/A1 test/B1 test > /dev/null 2>&1 + rmdir rtest/p1/c11 rtest/p1/c12 rtest/p2/c21 \ + rtest/p2/c22 rtest/p1 rtest/p2 rtest > /dev/null 2>&1 + [[ -n "$SCHED_DEBUG" ]] && + echo "$SCHED_DEBUG" > /sys/kernel/debug/sched/verbose +} + +# Pause in ms +pause() +{ + DELAY=$1 + LOOP=0 + while [[ $LOOP -lt $DELAY_FACTOR ]] + do + sleep $DELAY + ((LOOP++)) + done + return 0 +} + +console_msg() +{ + MSG=$1 + echo "$MSG" + echo "" > $CONSOLE + echo "$MSG" > $CONSOLE + pause 0.01 +} + +test_partition() +{ + EXPECTED_VAL=$1 + echo $EXPECTED_VAL > cpuset.cpus.partition + [[ $? -eq 0 ]] || exit 1 + ACTUAL_VAL=$(cat cpuset.cpus.partition) + [[ $ACTUAL_VAL != $EXPECTED_VAL ]] && { + echo "cpuset.cpus.partition: expect $EXPECTED_VAL, found $ACTUAL_VAL" + echo "Test FAILED" + exit 1 + } +} + +test_effective_cpus() +{ + EXPECTED_VAL=$1 + ACTUAL_VAL=$(cat cpuset.cpus.effective) + [[ "$ACTUAL_VAL" != "$EXPECTED_VAL" ]] && { + echo "cpuset.cpus.effective: expect '$EXPECTED_VAL', found '$ACTUAL_VAL'" + echo "Test FAILED" + exit 1 + } +} + +# Adding current process to cgroup.procs as a test +test_add_proc() +{ + OUTSTR="$1" + ERRMSG=$((echo $$ > cgroup.procs) |& cat) + echo $ERRMSG | grep -q "$OUTSTR" + [[ $? -ne 0 ]] && { + echo "cgroup.procs: expect '$OUTSTR', got '$ERRMSG'" + echo "Test FAILED" + exit 1 + } + echo $$ > $CGROUP2/cgroup.procs # Move out the task +} + +# +# Cpuset controller state transition test matrix. +# +# Cgroup test hierarchy +# +# root +# | +# +------+------+ +# | | +# A1 B1 +# | +# A2 +# | +# A3 +# +# P<v> = set cpus.partition (0:member, 1:root, 2:isolated) +# C<l> = add cpu-list to cpuset.cpus +# X<l> = add cpu-list to cpuset.cpus.exclusive +# S<p> = use prefix in subtree_control +# T = put a task into cgroup +# CX<l> = add cpu-list to both cpuset.cpus and cpuset.cpus.exclusive +# O<c>=<v> = Write <v> to CPU online file of <c> +# +# ECPUs - effective CPUs of cpusets +# Pstate - partition root state +# ISOLCPUS - isolated CPUs (<icpus>[,<icpus2>]) +# +# Note that if there are 2 fields in ISOLCPUS, the first one is for +# sched-debug matching which includes offline CPUs and single-CPU partitions +# while the second one is for matching cpuset.cpus.isolated. +# +SETUP_A123_PARTITIONS="C1-3:P1:S+ C2-3:P1:S+ C3:P1" +TEST_MATRIX=( + # old-A1 old-A2 old-A3 old-B1 new-A1 new-A2 new-A3 new-B1 fail ECPUs Pstate ISOLCPUS + # ------ ------ ------ ------ ------ ------ ------ ------ ---- ----- ------ -------- + " C0-1 . . C2-3 S+ C4-5 . . 0 A2:0-1" + " C0-1 . . C2-3 P1 . . . 0 " + " C0-1 . . C2-3 P1:S+ C0-1:P1 . . 0 " + " C0-1 . . C2-3 P1:S+ C1:P1 . . 0 " + " C0-1:S+ . . C2-3 . . . P1 0 " + " C0-1:P1 . . C2-3 S+ C1 . . 0 " + " C0-1:P1 . . C2-3 S+ C1:P1 . . 0 " + " C0-1:P1 . . C2-3 S+ C1:P1 . P1 0 " + " C0-1:P1 . . C2-3 C4-5 . . . 0 A1:4-5" + " C0-1:P1 . . C2-3 S+:C4-5 . . . 0 A1:4-5" + " C0-1 . . C2-3:P1 . . . C2 0 " + " C0-1 . . C2-3:P1 . . . C4-5 0 B1:4-5" + "C0-3:P1:S+ C2-3:P1 . . . . . . 0 A1:0-1|A2:2-3|XA2:2-3" + "C0-3:P1:S+ C2-3:P1 . . C1-3 . . . 0 A1:1|A2:2-3|XA2:2-3" + "C2-3:P1:S+ C3:P1 . . C3 . . . 0 A1:|A2:3|XA2:3 A1:P1|A2:P1" + "C2-3:P1:S+ C3:P1 . . C3 P0 . . 0 A1:3|A2:3 A1:P1|A2:P0" + "C2-3:P1:S+ C2:P1 . . C2-4 . . . 0 A1:3-4|A2:2" + "C2-3:P1:S+ C3:P1 . . C3 . . C0-2 0 A1:|B1:0-2 A1:P1|A2:P1" + "$SETUP_A123_PARTITIONS . C2-3 . . . 0 A1:|A2:2|A3:3 A1:P1|A2:P1|A3:P1" + + # CPU offlining cases: + " C0-1 . . C2-3 S+ C4-5 . O2=0 0 A1:0-1|B1:3" + "C0-3:P1:S+ C2-3:P1 . . O2=0 . . . 0 A1:0-1|A2:3" + "C0-3:P1:S+ C2-3:P1 . . O2=0 O2=1 . . 0 A1:0-1|A2:2-3" + "C0-3:P1:S+ C2-3:P1 . . O1=0 . . . 0 A1:0|A2:2-3" + "C0-3:P1:S+ C2-3:P1 . . O1=0 O1=1 . . 0 A1:0-1|A2:2-3" + "C2-3:P1:S+ C3:P1 . . O3=0 O3=1 . . 0 A1:2|A2:3 A1:P1|A2:P1" + "C2-3:P1:S+ C3:P2 . . O3=0 O3=1 . . 0 A1:2|A2:3 A1:P1|A2:P2" + "C2-3:P1:S+ C3:P1 . . O2=0 O2=1 . . 0 A1:2|A2:3 A1:P1|A2:P1" + "C2-3:P1:S+ C3:P2 . . O2=0 O2=1 . . 0 A1:2|A2:3 A1:P1|A2:P2" + "C2-3:P1:S+ C3:P1 . . O2=0 . . . 0 A1:|A2:3 A1:P1|A2:P1" + "C2-3:P1:S+ C3:P1 . . O3=0 . . . 0 A1:2|A2: A1:P1|A2:P1" + "C2-3:P1:S+ C3:P1 . . T:O2=0 . . . 0 A1:3|A2:3 A1:P1|A2:P-1" + "C2-3:P1:S+ C3:P1 . . . T:O3=0 . . 0 A1:2|A2:2 A1:P1|A2:P-1" + "$SETUP_A123_PARTITIONS . O1=0 . . . 0 A1:|A2:2|A3:3 A1:P1|A2:P1|A3:P1" + "$SETUP_A123_PARTITIONS . O2=0 . . . 0 A1:1|A2:|A3:3 A1:P1|A2:P1|A3:P1" + "$SETUP_A123_PARTITIONS . O3=0 . . . 0 A1:1|A2:2|A3: A1:P1|A2:P1|A3:P1" + "$SETUP_A123_PARTITIONS . T:O1=0 . . . 0 A1:2-3|A2:2-3|A3:3 A1:P1|A2:P-1|A3:P-1" + "$SETUP_A123_PARTITIONS . . T:O2=0 . . 0 A1:1|A2:3|A3:3 A1:P1|A2:P1|A3:P-1" + "$SETUP_A123_PARTITIONS . . . T:O3=0 . 0 A1:1|A2:2|A3:2 A1:P1|A2:P1|A3:P-1" + "$SETUP_A123_PARTITIONS . T:O1=0 O1=1 . . 0 A1:1|A2:2|A3:3 A1:P1|A2:P1|A3:P1" + "$SETUP_A123_PARTITIONS . . T:O2=0 O2=1 . 0 A1:1|A2:2|A3:3 A1:P1|A2:P1|A3:P1" + "$SETUP_A123_PARTITIONS . . . T:O3=0 O3=1 0 A1:1|A2:2|A3:3 A1:P1|A2:P1|A3:P1" + "$SETUP_A123_PARTITIONS . T:O1=0 O2=0 O1=1 . 0 A1:1|A2:|A3:3 A1:P1|A2:P1|A3:P1" + "$SETUP_A123_PARTITIONS . T:O1=0 O2=0 O2=1 . 0 A1:2-3|A2:2-3|A3:3 A1:P1|A2:P-1|A3:P-1" + + # old-A1 old-A2 old-A3 old-B1 new-A1 new-A2 new-A3 new-B1 fail ECPUs Pstate ISOLCPUS + # ------ ------ ------ ------ ------ ------ ------ ------ ---- ----- ------ -------- + # + # Remote partition and cpuset.cpus.exclusive tests + # + " C0-3:S+ C1-3:S+ C2-3 . X2-3 . . . 0 A1:0-3|A2:1-3|A3:2-3|XA1:2-3" + " C0-3:S+ C1-3:S+ C2-3 . X2-3 X2-3:P2 . . 0 A1:0-1|A2:2-3|A3:2-3 A1:P0|A2:P2 2-3" + " C0-3:S+ C1-3:S+ C2-3 . X2-3 X3:P2 . . 0 A1:0-2|A2:3|A3:3 A1:P0|A2:P2 3" + " C0-3:S+ C1-3:S+ C2-3 . X2-3 X2-3 X2-3:P2 . 0 A1:0-1|A2:1|A3:2-3 A1:P0|A3:P2 2-3" + " C0-3:S+ C1-3:S+ C2-3 . X2-3 X2-3 X2-3:P2:C3 . 0 A1:0-1|A2:1|A3:2-3 A1:P0|A3:P2 2-3" + " C0-3:S+ C1-3:S+ C2-3 C2-3 . . . P2 0 A1:0-3|A2:1-3|A3:2-3|B1:2-3 A1:P0|A3:P0|B1:P-2" + " C0-3:S+ C1-3:S+ C2-3 C4-5 . . . P2 0 B1:4-5 B1:P2 4-5" + " C0-3:S+ C1-3:S+ C2-3 C4 X2-3 X2-3 X2-3:P2 P2 0 A3:2-3|B1:4 A3:P2|B1:P2 2-4" + " C0-3:S+ C1-3:S+ C2-3 C4 X2-3 X2-3 X2-3:P2:C1-3 P2 0 A3:2-3|B1:4 A3:P2|B1:P2 2-4" + " C0-3:S+ C1-3:S+ C2-3 C4 X1-3 X1-3:P2 P2 . 0 A2:1|A3:2-3 A2:P2|A3:P2 1-3" + " C0-3:S+ C1-3:S+ C2-3 C4 X2-3 X2-3 X2-3:P2 P2:C4-5 0 A3:2-3|B1:4-5 A3:P2|B1:P2 2-5" + " C4:X0-3:S+ X1-3:S+ X2-3 . . P2 . . 0 A1:4|A2:1-3|A3:1-3 A2:P2 1-3" + " C4:X0-3:S+ X1-3:S+ X2-3 . . . P2 . 0 A1:4|A2:4|A3:2-3 A3:P2 2-3" + + # Nested remote/local partition tests + " C0-3:S+ C1-3:S+ C2-3 C4-5 X2-3 X2-3:P1 P2 P1 0 A1:0-1|A2:|A3:2-3|B1:4-5 \ + A1:P0|A2:P1|A3:P2|B1:P1 2-3" + " C0-3:S+ C1-3:S+ C2-3 C4 X2-3 X2-3:P1 P2 P1 0 A1:0-1|A2:|A3:2-3|B1:4 \ + A1:P0|A2:P1|A3:P2|B1:P1 2-4|2-3" + " C0-3:S+ C1-3:S+ C2-3 C4 X2-3 X2-3:P1 . P1 0 A1:0-1|A2:2-3|A3:2-3|B1:4 \ + A1:P0|A2:P1|A3:P0|B1:P1" + " C0-3:S+ C1-3:S+ C3 C4 X2-3 X2-3:P1 P2 P1 0 A1:0-1|A2:2|A3:3|B1:4 \ + A1:P0|A2:P1|A3:P2|B1:P1 2-4|3" + " C0-4:S+ C1-4:S+ C2-4 . X2-4 X2-4:P2 X4:P1 . 0 A1:0-1|A2:2-3|A3:4 \ + A1:P0|A2:P2|A3:P1 2-4|2-3" + " C0-4:S+ C1-4:S+ C2-4 . X2-4 X2-4:P2 X3-4:P1 . 0 A1:0-1|A2:2|A3:3-4 \ + A1:P0|A2:P2|A3:P1 2" + " C0-4:X2-4:S+ C1-4:X2-4:S+:P2 C2-4:X4:P1 \ + . . X5 . . 0 A1:0-4|A2:1-4|A3:2-4 \ + A1:P0|A2:P-2|A3:P-1 ." + " C0-4:X2-4:S+ C1-4:X2-4:S+:P2 C2-4:X4:P1 \ + . . . X1 . 0 A1:0-1|A2:2-4|A3:2-4 \ + A1:P0|A2:P2|A3:P-1 2-4" + + # Remote partition offline tests + " C0-3:S+ C1-3:S+ C2-3 . X2-3 X2-3 X2-3:P2:O2=0 . 0 A1:0-1|A2:1|A3:3 A1:P0|A3:P2 2-3" + " C0-3:S+ C1-3:S+ C2-3 . X2-3 X2-3 X2-3:P2:O2=0 O2=1 0 A1:0-1|A2:1|A3:2-3 A1:P0|A3:P2 2-3" + " C0-3:S+ C1-3:S+ C3 . X2-3 X2-3 P2:O3=0 . 0 A1:0-2|A2:1-2|A3: A1:P0|A3:P2 3" + " C0-3:S+ C1-3:S+ C3 . X2-3 X2-3 T:P2:O3=0 . 0 A1:0-2|A2:1-2|A3:1-2 A1:P0|A3:P-2 3|" + + # An invalidated remote partition cannot self-recover from hotplug + " C0-3:S+ C1-3:S+ C2 . X2-3 X2-3 T:P2:O2=0 O2=1 0 A1:0-3|A2:1-3|A3:2 A1:P0|A3:P-2 ." + + # cpus.exclusive.effective clearing test + " C0-3:S+ C1-3:S+ C2 . X2-3:X . . . 0 A1:0-3|A2:1-3|A3:2|XA1:" + + # Invalid to valid remote partition transition test + " C0-3:S+ C1-3 . . . X3:P2 . . 0 A1:0-3|A2:1-3|XA2: A2:P-2 ." + " C0-3:S+ C1-3:X3:P2 + . . X2-3 P2 . . 0 A1:0-2|A2:3|XA2:3 A2:P2 3" + + # Invalid to valid local partition direct transition tests + " C1-3:S+:P2 X4:P2 . . . . . . 0 A1:1-3|XA1:1-3|A2:1-3:XA2: A1:P2|A2:P-2 1-3" + " C1-3:S+:P2 X4:P2 . . . X3:P2 . . 0 A1:1-2|XA1:1-3|A2:3:XA2:3 A1:P2|A2:P2 1-3" + " C0-3:P2 . . C4-6 C0-4 . . . 0 A1:0-4|B1:4-6 A1:P-2|B1:P0" + " C0-3:P2 . . C4-6 C0-4:C0-3 . . . 0 A1:0-3|B1:4-6 A1:P2|B1:P0 0-3" + + # Local partition invalidation tests + " C0-3:X1-3:S+:P2 C1-3:X2-3:S+:P2 C2-3:X3:P2 \ + . . . . . 0 A1:1|A2:2|A3:3 A1:P2|A2:P2|A3:P2 1-3" + " C0-3:X1-3:S+:P2 C1-3:X2-3:S+:P2 C2-3:X3:P2 \ + . . X4 . . 0 A1:1-3|A2:1-3|A3:2-3|XA2:|XA3: A1:P2|A2:P-2|A3:P-2 1-3" + " C0-3:X1-3:S+:P2 C1-3:X2-3:S+:P2 C2-3:X3:P2 \ + . . C4:X . . 0 A1:1-3|A2:1-3|A3:2-3|XA2:|XA3: A1:P2|A2:P-2|A3:P-2 1-3" + # Local partition CPU change tests + " C0-5:S+:P2 C4-5:S+:P1 . . . C3-5 . . 0 A1:0-2|A2:3-5 A1:P2|A2:P1 0-2" + " C0-5:S+:P2 C4-5:S+:P1 . . C1-5 . . . 0 A1:1-3|A2:4-5 A1:P2|A2:P1 1-3" + + # cpus_allowed/exclusive_cpus update tests + " C0-3:X2-3:S+ C1-3:X2-3:S+ C2-3:X2-3 \ + . X:C4 . P2 . 0 A1:4|A2:4|XA2:|XA3:|A3:4 \ + A1:P0|A3:P-2 ." + " C0-3:X2-3:S+ C1-3:X2-3:S+ C2-3:X2-3 \ + . X1 . P2 . 0 A1:0-3|A2:1-3|XA1:1|XA2:|XA3:|A3:2-3 \ + A1:P0|A3:P-2 ." + " C0-3:X2-3:S+ C1-3:X2-3:S+ C2-3:X2-3 \ + . . X3 P2 . 0 A1:0-2|A2:1-2|XA2:3|XA3:3|A3:3 \ + A1:P0|A3:P2 3" + " C0-3:X2-3:S+ C1-3:X2-3:S+ C2-3:X2-3:P2 \ + . . X3 . . 0 A1:0-2|A2:1-2|XA2:3|XA3:3|A3:3|XA3:3 \ + A1:P0|A3:P2 3" + " C0-3:X2-3:S+ C1-3:X2-3:S+ C2-3:X2-3:P2 \ + . X4 . . . 0 A1:0-3|A2:1-3|A3:2-3|XA1:4|XA2:|XA3 \ + A1:P0|A3:P-2" + + # old-A1 old-A2 old-A3 old-B1 new-A1 new-A2 new-A3 new-B1 fail ECPUs Pstate ISOLCPUS + # ------ ------ ------ ------ ------ ------ ------ ------ ---- ----- ------ -------- + # + # Incorrect change to cpuset.cpus[.exclusive] invalidates partition root + # + # Adding CPUs to partition root that are not in parent's + # cpuset.cpus is allowed, but those extra CPUs are ignored. + "C2-3:P1:S+ C3:P1 . . . C2-4 . . 0 A1:|A2:2-3 A1:P1|A2:P1" + + # Taking away all CPUs from parent or itself if there are tasks + # will make the partition invalid. + "C2-3:P1:S+ C3:P1 . . T C2-3 . . 0 A1:2-3|A2:2-3 A1:P1|A2:P-1" + " C3:P1:S+ C3 . . T P1 . . 0 A1:3|A2:3 A1:P1|A2:P-1" + "$SETUP_A123_PARTITIONS . T:C2-3 . . . 0 A1:2-3|A2:2-3|A3:3 A1:P1|A2:P-1|A3:P-1" + "$SETUP_A123_PARTITIONS . T:C2-3:C1-3 . . . 0 A1:1|A2:2|A3:3 A1:P1|A2:P1|A3:P1" + + # Changing a partition root to member makes child partitions invalid + "C2-3:P1:S+ C3:P1 . . P0 . . . 0 A1:2-3|A2:3 A1:P0|A2:P-1" + "$SETUP_A123_PARTITIONS . C2-3 P0 . . 0 A1:2-3|A2:2-3|A3:3 A1:P1|A2:P0|A3:P-1" + + # cpuset.cpus can contains cpus not in parent's cpuset.cpus as long + # as they overlap. + "C2-3:P1:S+ . . . . C3-4:P1 . . 0 A1:2|A2:3 A1:P1|A2:P1" + + # Deletion of CPUs distributed to child cgroup is allowed. + "C0-1:P1:S+ C1 . C2-3 C4-5 . . . 0 A1:4-5|A2:4-5" + + # To become a valid partition root, cpuset.cpus must overlap parent's + # cpuset.cpus. + " C0-1:P1 . . C2-3 S+ C4-5:P1 . . 0 A1:0-1|A2:0-1 A1:P1|A2:P-1" + + # Enabling partition with child cpusets is allowed + " C0-1:S+ C1 . C2-3 P1 . . . 0 A1:0-1|A2:1 A1:P1" + + # A partition root with non-partition root parent is invalid| but it + # can be made valid if its parent becomes a partition root too. + " C0-1:S+ C1 . C2-3 . P2 . . 0 A1:0-1|A2:1 A1:P0|A2:P-2" + " C0-1:S+ C1:P2 . C2-3 P1 . . . 0 A1:0|A2:1 A1:P1|A2:P2 0-1|1" + + # A non-exclusive cpuset.cpus change will invalidate partition and its siblings + " C0-1:P1 . . C2-3 C0-2 . . . 0 A1:0-2|B1:2-3 A1:P-1|B1:P0" + " C0-1:P1 . . P1:C2-3 C0-2 . . . 0 A1:0-2|B1:2-3 A1:P-1|B1:P-1" + " C0-1 . . P1:C2-3 C0-2 . . . 0 A1:0-2|B1:2-3 A1:P0|B1:P-1" + + # cpuset.cpus can overlap with sibling cpuset.cpus.exclusive but not subsumed by it + " C0-3 . . C4-5 X5 . . . 0 A1:0-3|B1:4-5" + + # Child partition root that try to take all CPUs from parent partition + # with tasks will remain invalid. + " C1-4:P1:S+ P1 . . . . . . 0 A1:1-4|A2:1-4 A1:P1|A2:P-1" + " C1-4:P1:S+ P1 . . . C1-4 . . 0 A1|A2:1-4 A1:P1|A2:P1" + " C1-4:P1:S+ P1 . . T C1-4 . . 0 A1:1-4|A2:1-4 A1:P1|A2:P-1" + + # Clearing of cpuset.cpus with a preset cpuset.cpus.exclusive shouldn't + # affect cpuset.cpus.exclusive.effective. + " C1-4:X3:S+ C1:X3 . . . C . . 0 A2:1-4|XA2:3" + + # cpuset.cpus can contain CPUs that overlap a sibling cpuset with cpus.exclusive + # but creating a local partition out of it is not allowed. Similarly and change + # in cpuset.cpus of a local partition that overlaps sibling exclusive CPUs will + # invalidate it. + " CX1-4:S+ CX2-4:P2 . C5-6 . . . P1 0 A1:1|A2:2-4|B1:5-6|XB1:5-6 \ + A1:P0|A2:P2:B1:P1 2-4" + " CX1-4:S+ CX2-4:P2 . C3-6 . . . P1 0 A1:1|A2:2-4|B1:5-6 \ + A1:P0|A2:P2:B1:P-1 2-4" + " CX1-4:S+ CX2-4:P2 . C5-6 . . . P1:C3-6 0 A1:1|A2:2-4|B1:5-6 \ + A1:P0|A2:P2:B1:P-1 2-4" + + # old-A1 old-A2 old-A3 old-B1 new-A1 new-A2 new-A3 new-B1 fail ECPUs Pstate ISOLCPUS + # ------ ------ ------ ------ ------ ------ ------ ------ ---- ----- ------ -------- + # Failure cases: + + # A task cannot be added to a partition with no cpu + "C2-3:P1:S+ C3:P1 . . O2=0:T . . . 1 A1:|A2:3 A1:P1|A2:P1" + + # Changes to cpuset.cpus.exclusive that violate exclusivity rule is rejected + " C0-3 . . C4-5 X0-3 . . X3-5 1 A1:0-3|B1:4-5" + + # cpuset.cpus cannot be a subset of sibling cpuset.cpus.exclusive + " C0-3 . . C4-5 X3-5 . . . 1 A1:0-3|B1:4-5" +) + +# +# Cpuset controller remote partition test matrix. +# +# Cgroup test hierarchy +# +# root +# | +# rtest (cpuset.cpus.exclusive=1-7) +# | +# +------+------+ +# | | +# p1 p2 +# +--+--+ +--+--+ +# | | | | +# c11 c12 c21 c22 +# +# REMOTE_TEST_MATRIX uses the same notational convention as TEST_MATRIX. +# Only CPUs 1-7 should be used. +# +REMOTE_TEST_MATRIX=( + # old-p1 old-p2 old-c11 old-c12 old-c21 old-c22 + # new-p1 new-p2 new-c11 new-c12 new-c21 new-c22 ECPUs Pstate ISOLCPUS + # ------ ------ ------- ------- ------- ------- ----- ------ -------- + " X1-3:S+ X4-6:S+ X1-2 X3 X4-5 X6 \ + . . P2 P2 P2 P2 c11:1-2|c12:3|c21:4-5|c22:6 \ + c11:P2|c12:P2|c21:P2|c22:P2 1-6" + " CX1-4:S+ . X1-2:P2 C3 . . \ + . . . C3-4 . . p1:3-4|c11:1-2|c12:3-4 \ + p1:P0|c11:P2|c12:P0 1-2" + " CX1-4:S+ . X1-2:P2 . . . \ + X2-4 . . . . . p1:1,3-4|c11:2 \ + p1:P0|c11:P2 2" + " CX1-5:S+ . X1-2:P2 X3-5:P1 . . \ + X2-4 . . . . . p1:1,5|c11:2|c12:3-4 \ + p1:P0|c11:P2|c12:P1 2" + " CX1-4:S+ . X1-2:P2 X3-4:P1 . . \ + . . X2 . . . p1:1|c11:2|c12:3-4 \ + p1:P0|c11:P2|c12:P1 2" + # p1 as member, will get its effective CPUs from its parent rtest + " CX1-4:S+ . X1-2:P2 X3-4:P1 . . \ + . . X1 CX2-4 . . p1:5-7|c11:1|c12:2-4 \ + p1:P0|c11:P2|c12:P1 1" + " CX1-4:S+ X5-6:P1:S+ . . . . \ + . . X1-2:P2 X4-5:P1 . X1-7:P2 p1:3|c11:1-2|c12:4:c22:5-6 \ + p1:P0|p2:P1|c11:P2|c12:P1|c22:P2 \ + 1-2,4-6|1-2,5-6" +) + +# +# Write to the cpu online file +# $1 - <c>=<v> where <c> = cpu number, <v> value to be written +# +write_cpu_online() +{ + CPU=${1%=*} + VAL=${1#*=} + CPUFILE=//sys/devices/system/cpu/cpu${CPU}/online + if [[ $VAL -eq 0 ]] + then + OFFLINE_CPUS="$OFFLINE_CPUS $CPU" + else + [[ -n "$OFFLINE_CPUS" ]] && { + OFFLINE_CPUS=$(echo $CPU $CPU $OFFLINE_CPUS | fmt -1 |\ + sort | uniq -u) + } + fi + echo $VAL > $CPUFILE + pause 0.05 +} + +# +# Set controller state +# $1 - cgroup directory +# $2 - state +# $3 - showerr +# +# The presence of ":" in state means transition from one to the next. +# +set_ctrl_state() +{ + TMPMSG=/tmp/.msg_$$ + CGRP=$1 + STATE=$2 + SHOWERR=${3} + CTRL=${CTRL:=$CONTROLLER} + HASERR=0 + REDIRECT="2> $TMPMSG" + [[ -z "$STATE" || "$STATE" = '.' ]] && return 0 + [[ $VERBOSE -gt 0 ]] && SHOWERR=1 + + rm -f $TMPMSG + for CMD in $(echo $STATE | sed -e "s/:/ /g") + do + TFILE=$CGRP/cgroup.procs + SFILE=$CGRP/cgroup.subtree_control + PFILE=$CGRP/cpuset.cpus.partition + CFILE=$CGRP/cpuset.cpus + XFILE=$CGRP/cpuset.cpus.exclusive + case $CMD in + S*) PREFIX=${CMD#?} + COMM="echo ${PREFIX}${CTRL} > $SFILE" + eval $COMM $REDIRECT + ;; + X*) + CPUS=${CMD#?} + COMM="echo $CPUS > $XFILE" + eval $COMM $REDIRECT + ;; + CX*) + CPUS=${CMD#??} + COMM="echo $CPUS > $CFILE; echo $CPUS > $XFILE" + eval $COMM $REDIRECT + ;; + C*) CPUS=${CMD#?} + COMM="echo $CPUS > $CFILE" + eval $COMM $REDIRECT + ;; + P*) VAL=${CMD#?} + case $VAL in + 0) VAL=member + ;; + 1) VAL=root + ;; + 2) VAL=isolated + ;; + *) + echo "Invalid partition state - $VAL" + exit 1 + ;; + esac + COMM="echo $VAL > $PFILE" + eval $COMM $REDIRECT + ;; + O*) VAL=${CMD#?} + write_cpu_online $VAL + ;; + T*) COMM="echo 0 > $TFILE" + eval $COMM $REDIRECT + ;; + *) echo "Unknown command: $CMD" + exit 1 + ;; + esac + RET=$? + [[ $RET -ne 0 ]] && { + [[ -n "$SHOWERR" ]] && { + echo "$COMM" + cat $TMPMSG + } + HASERR=1 + } + pause 0.01 + rm -f $TMPMSG + done + return $HASERR +} + +set_ctrl_state_noerr() +{ + CGRP=$1 + STATE=$2 + [[ -d $CGRP ]] || mkdir $CGRP + set_ctrl_state $CGRP $STATE 1 + [[ $? -ne 0 ]] && { + echo "ERROR: Failed to set $2 to cgroup $1!" + exit 1 + } +} + +online_cpus() +{ + [[ -n "OFFLINE_CPUS" ]] && { + for C in $OFFLINE_CPUS + do + write_cpu_online ${C}=1 + done + } +} + +# +# Remove all the test cgroup directories +# +reset_cgroup_states() +{ + echo 0 > $CGROUP2/cgroup.procs + online_cpus + rmdir $RESET_LIST > /dev/null 2>&1 +} + +dump_states() +{ + for DIR in $CGROUP_LIST + do + CPUS=$DIR/cpuset.cpus + ECPUS=$DIR/cpuset.cpus.effective + XCPUS=$DIR/cpuset.cpus.exclusive + XECPUS=$DIR/cpuset.cpus.exclusive.effective + PRS=$DIR/cpuset.cpus.partition + PCPUS=$DIR/.__DEBUG__.cpuset.cpus.subpartitions + ISCPUS=$DIR/cpuset.cpus.isolated + [[ -e $CPUS ]] && echo "$CPUS: $(cat $CPUS)" + [[ -e $XCPUS ]] && echo "$XCPUS: $(cat $XCPUS)" + [[ -e $ECPUS ]] && echo "$ECPUS: $(cat $ECPUS)" + [[ -e $XECPUS ]] && echo "$XECPUS: $(cat $XECPUS)" + [[ -e $PRS ]] && echo "$PRS: $(cat $PRS)" + [[ -e $PCPUS ]] && echo "$PCPUS: $(cat $PCPUS)" + [[ -e $ISCPUS ]] && echo "$ISCPUS: $(cat $ISCPUS)" + done +} + +# +# Set the actual cgroup directory into $CGRP_DIR +# $1 - cgroup name +# +set_cgroup_dir() +{ + CGRP_DIR=$1 + [[ $CGRP_DIR = A2 ]] && CGRP_DIR=A1/A2 + [[ $CGRP_DIR = A3 ]] && CGRP_DIR=A1/A2/A3 + [[ $CGRP_DIR = c11 ]] && CGRP_DIR=p1/c11 + [[ $CGRP_DIR = c12 ]] && CGRP_DIR=p1/c12 + [[ $CGRP_DIR = c21 ]] && CGRP_DIR=p2/c21 + [[ $CGRP_DIR = c22 ]] && CGRP_DIR=p2/c22 +} + +# +# Check effective cpus +# $1 - check string, format: <cgroup>:<cpu-list>[|<cgroup>:<cpu-list>]* +# +check_effective_cpus() +{ + CHK_STR=$1 + for CHK in $(echo $CHK_STR | sed -e "s/|/ /g") + do + set -- $(echo $CHK | sed -e "s/:/ /g") + CGRP=$1 + EXPECTED_CPUS=$2 + ACTUAL_CPUS= + if [[ $CGRP = X* ]] + then + CGRP=${CGRP#X} + FILE=cpuset.cpus.exclusive.effective + else + FILE=cpuset.cpus.effective + fi + set_cgroup_dir $CGRP + [[ -e $CGRP_DIR/$FILE ]] || return 1 + ACTUAL_CPUS=$(cat $CGRP_DIR/$FILE) + [[ $EXPECTED_CPUS = $ACTUAL_CPUS ]] || return 1 + done +} + +# +# Check cgroup states +# $1 - check string, format: <cgroup>:<state>[|<cgroup>:<state>]* +# +check_cgroup_states() +{ + CHK_STR=$1 + for CHK in $(echo $CHK_STR | sed -e "s/|/ /g") + do + set -- $(echo $CHK | sed -e "s/:/ /g") + CGRP=$1 + EXPECTED_STATE=$2 + FILE= + EVAL=$(expr substr $EXPECTED_STATE 2 2) + + set_cgroup_dir $CGRP + case $EXPECTED_STATE in + P*) FILE=$CGRP_DIR/cpuset.cpus.partition + ;; + *) echo "Unknown state: $EXPECTED_STATE!" + exit 1 + ;; + esac + ACTUAL_STATE=$(cat $FILE) + + case "$ACTUAL_STATE" in + member) VAL=0 + ;; + root) VAL=1 + ;; + isolated) + VAL=2 + ;; + "root invalid"*) + VAL=-1 + ;; + "isolated invalid"*) + VAL=-2 + ;; + esac + [[ $EVAL != $VAL ]] && return 1 + + # + # For root partition, dump sched-domains info to console if + # verbose mode set for manual comparison with sched debug info. + # + [[ $VAL -eq 1 && $VERBOSE -gt 0 ]] && { + DOMS=$(cat $CGRP_DIR/cpuset.cpus.effective) + [[ -n "$DOMS" ]] && + echo " [$CGRP_DIR] sched-domain: $DOMS" > $CONSOLE + } + done + return 0 +} + +# +# Get isolated (including offline) CPUs by looking at +# /sys/kernel/debug/sched/domains and cpuset.cpus.isolated control file, +# if available, and compare that with the expected value. +# +# Note that isolated CPUs from the sched/domains context include offline +# CPUs as well as CPUs in non-isolated 1-CPU partition. Those CPUs may +# not be included in the cpuset.cpus.isolated control file which contains +# only CPUs in isolated partitions as well as those that are isolated at +# boot time. +# +# $1 - expected isolated cpu list(s) <isolcpus1>{,<isolcpus2>} +# <isolcpus1> - expected sched/domains value +# <isolcpus2> - cpuset.cpus.isolated value = <isolcpus1> if not defined +# +check_isolcpus() +{ + EXPECTED_ISOLCPUS=$1 + ISCPUS=${CGROUP2}/cpuset.cpus.isolated + ISOLCPUS=$(cat $ISCPUS) + LASTISOLCPU= + SCHED_DOMAINS=/sys/kernel/debug/sched/domains + if [[ $EXPECTED_ISOLCPUS = . ]] + then + EXPECTED_ISOLCPUS= + EXPECTED_SDOMAIN= + elif [[ $(expr $EXPECTED_ISOLCPUS : ".*|.*") > 0 ]] + then + set -- $(echo $EXPECTED_ISOLCPUS | sed -e "s/|/ /g") + EXPECTED_ISOLCPUS=$2 + EXPECTED_SDOMAIN=$1 + else + EXPECTED_SDOMAIN=$EXPECTED_ISOLCPUS + fi + + # + # Appending pre-isolated CPUs + # Even though CPU #8 isn't used for testing, it can't be pre-isolated + # to make appending those CPUs easier. + # + [[ -n "$BOOT_ISOLCPUS" ]] && { + EXPECTED_ISOLCPUS=${EXPECTED_ISOLCPUS:+${EXPECTED_ISOLCPUS},}${BOOT_ISOLCPUS} + EXPECTED_SDOMAIN=${EXPECTED_SDOMAIN:+${EXPECTED_SDOMAIN},}${BOOT_ISOLCPUS} + } + + # + # Check cpuset.cpus.isolated cpumask + # + [[ "$EXPECTED_ISOLCPUS" != "$ISOLCPUS" ]] && { + # Take a 50ms pause and try again + pause 0.05 + ISOLCPUS=$(cat $ISCPUS) + } + [[ "$EXPECTED_ISOLCPUS" != "$ISOLCPUS" ]] && return 1 + ISOLCPUS= + EXPECTED_ISOLCPUS=$EXPECTED_SDOMAIN + + # + # Use the sched domain in debugfs to check isolated CPUs, if available + # + [[ -d $SCHED_DOMAINS ]] || return 0 + + for ((CPU=0; CPU < $NR_CPUS; CPU++)) + do + [[ -n "$(ls ${SCHED_DOMAINS}/cpu$CPU)" ]] && continue + + if [[ -z "$LASTISOLCPU" ]] + then + ISOLCPUS=$CPU + LASTISOLCPU=$CPU + elif [[ "$LASTISOLCPU" -eq $((CPU - 1)) ]] + then + echo $ISOLCPUS | grep -q "\<$LASTISOLCPU\$" + if [[ $? -eq 0 ]] + then + ISOLCPUS=${ISOLCPUS}- + fi + LASTISOLCPU=$CPU + else + if [[ $ISOLCPUS = *- ]] + then + ISOLCPUS=${ISOLCPUS}$LASTISOLCPU + fi + ISOLCPUS=${ISOLCPUS},$CPU + LASTISOLCPU=$CPU + fi + done + [[ "$ISOLCPUS" = *- ]] && ISOLCPUS=${ISOLCPUS}$LASTISOLCPU + + [[ "$EXPECTED_SDOMAIN" = "$ISOLCPUS" ]] +} + +test_fail() +{ + TESTNUM=$1 + TESTTYPE=$2 + ADDINFO=$3 + echo "Test $TEST[$TESTNUM] failed $TESTTYPE check!" + [[ -n "$ADDINFO" ]] && echo "*** $ADDINFO ***" + eval echo \${$TEST[$I]} + echo + dump_states + exit 1 +} + +# +# Check to see if there are unexpected isolated CPUs left beyond the boot +# time isolated ones. +# +null_isolcpus_check() +{ + [[ $VERBOSE -gt 0 ]] || return 0 + # Retry a few times before printing error + RETRY=0 + while [[ $RETRY -lt 8 ]] + do + pause 0.02 + check_isolcpus "." + [[ $? -eq 0 ]] && return 0 + ((RETRY++)) + done + echo "Unexpected isolated CPUs: $ISOLCPUS" + dump_states + exit 1 +} + +# +# Check state transition test result +# $1 - Test number +# $2 - Expected effective CPU values +# $3 - Expected partition states +# $4 - Expected isolated CPUs +# +check_test_results() +{ + _NR=$1 + _ECPUS="$2" + _PSTATES="$3" + _ISOLCPUS="$4" + + [[ -n "$_ECPUS" && "$_ECPUS" != . ]] && { + check_effective_cpus $_ECPUS + [[ $? -ne 0 ]] && test_fail $_NR "effective CPU" \ + "Cgroup $CGRP: expected $EXPECTED_CPUS, got $ACTUAL_CPUS" + } + + [[ -n "$_PSTATES" && "$_PSTATES" != . ]] && { + check_cgroup_states $_PSTATES + [[ $? -ne 0 ]] && test_fail $_NR states \ + "Cgroup $CGRP: expected $EXPECTED_STATE, got $ACTUAL_STATE" + } + + # Compare the expected isolated CPUs with the actual ones, + # if available + [[ -n "$_ISOLCPUS" ]] && { + check_isolcpus $_ISOLCPUS + [[ $? -ne 0 ]] && { + [[ -n "$BOOT_ISOLCPUS" ]] && _ISOLCPUS=${_ISOLCPUS},${BOOT_ISOLCPUS} + test_fail $_NR "isolated CPU" \ + "Expect $_ISOLCPUS, get $ISOLCPUS instead" + } + } + reset_cgroup_states + # + # Check to see if effective cpu list changes + # + _NEWLIST=$(cat $CGROUP2/cpuset.cpus.effective) + RETRY=0 + while [[ $_NEWLIST != $CPULIST && $RETRY -lt 8 ]] + do + # Wait a bit longer & recheck a few times + pause 0.02 + ((RETRY++)) + _NEWLIST=$(cat $CGROUP2/cpuset.cpus.effective) + done + [[ $_NEWLIST != $CPULIST ]] && { + echo "Effective cpus changed to $_NEWLIST after test $_NR!" + exit 1 + } + null_isolcpus_check + [[ $VERBOSE -gt 0 ]] && echo "Test $I done." +} + +# +# Run cpuset state transition test +# $1 - test matrix name +# +# This test is somewhat fragile as delays (sleep x) are added in various +# places to make sure state changes are fully propagated before the next +# action. These delays may need to be adjusted if running in a slower machine. +# +run_state_test() +{ + TEST=$1 + CONTROLLER=cpuset + CGROUP_LIST=". A1 A1/A2 A1/A2/A3 B1" + RESET_LIST="A1/A2/A3 A1/A2 A1 B1" + I=0 + eval CNT="\${#$TEST[@]}" + + reset_cgroup_states + console_msg "Running state transition test ..." + + while [[ $I -lt $CNT ]] + do + echo "Running test $I ..." > $CONSOLE + [[ $VERBOSE -gt 1 ]] && { + echo "" + eval echo \${$TEST[$I]} + } + eval set -- "\${$TEST[$I]}" + OLD_A1=$1 + OLD_A2=$2 + OLD_A3=$3 + OLD_B1=$4 + NEW_A1=$5 + NEW_A2=$6 + NEW_A3=$7 + NEW_B1=$8 + RESULT=$9 + ECPUS=${10} + STATES=${11} + ICPUS=${12} + + set_ctrl_state_noerr A1 $OLD_A1 + set_ctrl_state_noerr A1/A2 $OLD_A2 + set_ctrl_state_noerr A1/A2/A3 $OLD_A3 + set_ctrl_state_noerr B1 $OLD_B1 + + RETVAL=0 + set_ctrl_state A1 $NEW_A1; ((RETVAL += $?)) + set_ctrl_state A1/A2 $NEW_A2; ((RETVAL += $?)) + set_ctrl_state A1/A2/A3 $NEW_A3; ((RETVAL += $?)) + set_ctrl_state B1 $NEW_B1; ((RETVAL += $?)) + + [[ $RETVAL -ne $RESULT ]] && test_fail $I result + + check_test_results $I "$ECPUS" "$STATES" "$ICPUS" + ((I++)) + done + echo "All $I tests of $TEST PASSED." +} + +# +# Run cpuset remote partition state transition test +# $1 - test matrix name +# +run_remote_state_test() +{ + TEST=$1 + CONTROLLER=cpuset + [[ -d rtest ]] || mkdir rtest + cd rtest + echo +cpuset > cgroup.subtree_control + echo "1-7" > cpuset.cpus + echo "1-7" > cpuset.cpus.exclusive + CGROUP_LIST=".. . p1 p2 p1/c11 p1/c12 p2/c21 p2/c22" + RESET_LIST="p1/c11 p1/c12 p2/c21 p2/c22 p1 p2" + I=0 + eval CNT="\${#$TEST[@]}" + + reset_cgroup_states + console_msg "Running remote partition state transition test ..." + + while [[ $I -lt $CNT ]] + do + echo "Running test $I ..." > $CONSOLE + [[ $VERBOSE -gt 1 ]] && { + echo "" + eval echo \${$TEST[$I]} + } + eval set -- "\${$TEST[$I]}" + OLD_p1=$1 + OLD_p2=$2 + OLD_c11=$3 + OLD_c12=$4 + OLD_c21=$5 + OLD_c22=$6 + NEW_p1=$7 + NEW_p2=$8 + NEW_c11=$9 + NEW_c12=${10} + NEW_c21=${11} + NEW_c22=${12} + ECPUS=${13} + STATES=${14} + ICPUS=${15} + + set_ctrl_state_noerr p1 $OLD_p1 + set_ctrl_state_noerr p2 $OLD_p2 + set_ctrl_state_noerr p1/c11 $OLD_c11 + set_ctrl_state_noerr p1/c12 $OLD_c12 + set_ctrl_state_noerr p2/c21 $OLD_c21 + set_ctrl_state_noerr p2/c22 $OLD_c22 + + RETVAL=0 + set_ctrl_state p1 $NEW_p1 ; ((RETVAL += $?)) + set_ctrl_state p2 $NEW_p2 ; ((RETVAL += $?)) + set_ctrl_state p1/c11 $NEW_c11; ((RETVAL += $?)) + set_ctrl_state p1/c12 $NEW_c12; ((RETVAL += $?)) + set_ctrl_state p2/c21 $NEW_c21; ((RETVAL += $?)) + set_ctrl_state p2/c22 $NEW_c22; ((RETVAL += $?)) + + [[ $RETVAL -ne 0 ]] && test_fail $I result + + check_test_results $I "$ECPUS" "$STATES" "$ICPUS" + ((I++)) + done + cd .. + rmdir rtest + echo "All $I tests of $TEST PASSED." +} + +# +# Testing the new "isolated" partition root type +# +test_isolated() +{ + cd $CGROUP2/test + echo 2-3 > cpuset.cpus + TYPE=$(cat cpuset.cpus.partition) + [[ $TYPE = member ]] || echo member > cpuset.cpus.partition + + console_msg "Change from member to root" + test_partition root + + console_msg "Change from root to isolated" + test_partition isolated + + console_msg "Change from isolated to member" + test_partition member + + console_msg "Change from member to isolated" + test_partition isolated + + console_msg "Change from isolated to root" + test_partition root + + console_msg "Change from root to member" + test_partition member + + # + # Testing partition root with no cpu + # + console_msg "Distribute all cpus to child partition" + echo +cpuset > cgroup.subtree_control + test_partition root + + mkdir A1 + cd A1 + echo 2-3 > cpuset.cpus + test_partition root + test_effective_cpus 2-3 + cd .. + test_effective_cpus "" + + console_msg "Moving task to partition test" + test_add_proc "No space left" + cd A1 + test_add_proc "" + cd .. + + console_msg "Shrink and expand child partition" + cd A1 + echo 2 > cpuset.cpus + cd .. + test_effective_cpus 3 + cd A1 + echo 2-3 > cpuset.cpus + cd .. + test_effective_cpus "" + + # Cleaning up + console_msg "Cleaning up" + echo $$ > $CGROUP2/cgroup.procs + [[ -d A1 ]] && rmdir A1 + null_isolcpus_check + pause 0.05 +} + +# +# Wait for inotify event for the given file and read it +# $1: cgroup file to wait for +# $2: file to store the read result +# +wait_inotify() +{ + CGROUP_FILE=$1 + OUTPUT_FILE=$2 + + $WAIT_INOTIFY $CGROUP_FILE + cat $CGROUP_FILE > $OUTPUT_FILE +} + +# +# Test if inotify events are properly generated when going into and out of +# invalid partition state. +# +test_inotify() +{ + ERR=0 + PRS=/tmp/.prs_$$ + cd $CGROUP2/test + [[ -f $WAIT_INOTIFY ]] || { + echo "wait_inotify not found, inotify test SKIPPED." + return + } + + pause 0.01 + echo 1 > cpuset.cpus + echo 0 > cgroup.procs + echo root > cpuset.cpus.partition + pause 0.01 + rm -f $PRS + wait_inotify $PWD/cpuset.cpus.partition $PRS & + pause 0.01 + set_ctrl_state . "O1=0" + pause 0.01 + check_cgroup_states ".:P-1" + if [[ $? -ne 0 ]] + then + echo "FAILED: Inotify test - partition not invalid" + ERR=1 + elif [[ ! -f $PRS ]] + then + echo "FAILED: Inotify test - event not generated" + ERR=1 + kill %1 + elif [[ $(cat $PRS) != "root invalid"* ]] + then + echo "FAILED: Inotify test - incorrect state" + cat $PRS + ERR=1 + fi + online_cpus + echo member > cpuset.cpus.partition + echo 0 > ../cgroup.procs + if [[ $ERR -ne 0 ]] + then + exit 1 + else + echo "Inotify test PASSED" + fi + echo member > cpuset.cpus.partition + echo "" > cpuset.cpus +} + +trap cleanup 0 2 3 6 +run_state_test TEST_MATRIX +run_remote_state_test REMOTE_TEST_MATRIX +test_isolated +test_inotify +echo "All tests PASSED." |