diff options
Diffstat (limited to 'tools/testing/selftests/drivers/net/bonding/bond_options.sh')
| -rwxr-xr-x | tools/testing/selftests/drivers/net/bonding/bond_options.sh | 333 |
1 files changed, 333 insertions, 0 deletions
diff --git a/tools/testing/selftests/drivers/net/bonding/bond_options.sh b/tools/testing/selftests/drivers/net/bonding/bond_options.sh new file mode 100755 index 000000000000..41d0859feb7d --- /dev/null +++ b/tools/testing/selftests/drivers/net/bonding/bond_options.sh @@ -0,0 +1,333 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test bonding options with mode 1,5,6 + +ALL_TESTS=" + prio + arp_validate + num_grat_arp +" + +lib_dir=$(dirname "$0") +source ${lib_dir}/bond_topo_3d1c.sh + +skip_prio() +{ + local skip=1 + + # check if iproute support prio option + ip -n ${s_ns} link set eth0 type bond_slave prio 10 + [[ $? -ne 0 ]] && skip=0 + + # check if kernel support prio option + ip -n ${s_ns} -d link show eth0 | grep -q "prio 10" + [[ $? -ne 0 ]] && skip=0 + + return $skip +} + +skip_ns() +{ + local skip=1 + + # check if iproute support ns_ip6_target option + ip -n ${s_ns} link add bond1 type bond ns_ip6_target ${g_ip6} + [[ $? -ne 0 ]] && skip=0 + + # check if kernel support ns_ip6_target option + ip -n ${s_ns} -d link show bond1 | grep -q "ns_ip6_target ${g_ip6}" + [[ $? -ne 0 ]] && skip=0 + + ip -n ${s_ns} link del bond1 + + return $skip +} + +active_slave="" +active_slave_changed() +{ + local old_active_slave=$1 + local new_active_slave=$(cmd_jq "ip -n ${s_ns} -d -j link show bond0" \ + ".[].linkinfo.info_data.active_slave") + [ "$new_active_slave" != "$old_active_slave" -a "$new_active_slave" != "null" ] +} + +check_active_slave() +{ + local target_active_slave=$1 + slowwait 5 active_slave_changed $active_slave + active_slave=$(cmd_jq "ip -n ${s_ns} -d -j link show bond0" ".[].linkinfo.info_data.active_slave") + test "$active_slave" = "$target_active_slave" + check_err $? "Current active slave is $active_slave but not $target_active_slave" +} + +# Test bonding prio option +prio_test() +{ + local param="$1" + RET=0 + + # create bond + bond_reset "${param}" + # set active_slave to primary eth1 specifically + ip -n ${s_ns} link set bond0 type bond active_slave eth1 + + # check bonding member prio value + ip -n ${s_ns} link set eth0 type bond_slave prio 0 + ip -n ${s_ns} link set eth1 type bond_slave prio 10 + ip -n ${s_ns} link set eth2 type bond_slave prio 11 + cmd_jq "ip -n ${s_ns} -d -j link show eth0" \ + ".[].linkinfo.info_slave_data | select (.prio == 0)" "-e" &> /dev/null + check_err $? "eth0 prio is not 0" + cmd_jq "ip -n ${s_ns} -d -j link show eth1" \ + ".[].linkinfo.info_slave_data | select (.prio == 10)" "-e" &> /dev/null + check_err $? "eth1 prio is not 10" + cmd_jq "ip -n ${s_ns} -d -j link show eth2" \ + ".[].linkinfo.info_slave_data | select (.prio == 11)" "-e" &> /dev/null + check_err $? "eth2 prio is not 11" + + bond_check_connection "setup" + + # active slave should be the primary slave + check_active_slave eth1 + + # active slave should be the higher prio slave + ip -n ${s_ns} link set $active_slave down + check_active_slave eth2 + bond_check_connection "fail over" + + # when only 1 slave is up + ip -n ${s_ns} link set $active_slave down + check_active_slave eth0 + bond_check_connection "only 1 slave up" + + # when a higher prio slave change to up + ip -n ${s_ns} link set eth2 up + bond_check_connection "higher prio slave up" + case $primary_reselect in + "0") + check_active_slave "eth2" + ;; + "1") + check_active_slave "eth0" + ;; + "2") + check_active_slave "eth0" + ;; + esac + local pre_active_slave=$active_slave + + # when the primary slave change to up + ip -n ${s_ns} link set eth1 up + bond_check_connection "primary slave up" + case $primary_reselect in + "0") + check_active_slave "eth1" + ;; + "1") + check_active_slave "$pre_active_slave" + ;; + "2") + check_active_slave "$pre_active_slave" + ip -n ${s_ns} link set $active_slave down + bond_check_connection "pre_active slave down" + check_active_slave "eth1" + ;; + esac + + # Test changing bond slave prio + if [[ "$primary_reselect" == "0" ]];then + ip -n ${s_ns} link set eth0 type bond_slave prio 1000000 + ip -n ${s_ns} link set eth1 type bond_slave prio 0 + ip -n ${s_ns} link set eth2 type bond_slave prio -50 + ip -n ${s_ns} -d link show eth0 | grep -q 'prio 1000000' + check_err $? "eth0 prio is not 1000000" + ip -n ${s_ns} -d link show eth1 | grep -q 'prio 0' + check_err $? "eth1 prio is not 0" + ip -n ${s_ns} -d link show eth2 | grep -q 'prio -50' + check_err $? "eth3 prio is not -50" + check_active_slave "eth1" + + ip -n ${s_ns} link set $active_slave down + check_active_slave "eth0" + bond_check_connection "change slave prio" + fi +} + +prio_miimon() +{ + local primary_reselect + local mode=$1 + + for primary_reselect in 0 1 2; do + prio_test "mode $mode miimon 100 primary eth1 primary_reselect $primary_reselect" + log_test "prio" "$mode miimon primary_reselect $primary_reselect" + done +} + +prio_arp() +{ + local primary_reselect + local mode=$1 + + for primary_reselect in 0 1 2; do + prio_test "mode $mode arp_interval 100 arp_ip_target ${g_ip4} primary eth1 primary_reselect $primary_reselect" + log_test "prio" "$mode arp_ip_target primary_reselect $primary_reselect" + done +} + +prio_ns() +{ + local primary_reselect + local mode=$1 + + if skip_ns; then + log_test_skip "prio ns" "Current iproute or kernel doesn't support bond option 'ns_ip6_target'." + return 0 + fi + + for primary_reselect in 0 1 2; do + prio_test "mode $mode arp_interval 100 ns_ip6_target ${g_ip6} primary eth1 primary_reselect $primary_reselect" + log_test "prio" "$mode ns_ip6_target primary_reselect $primary_reselect" + done +} + +prio() +{ + local mode modes="active-backup balance-tlb balance-alb" + + if skip_prio; then + log_test_skip "prio" "Current iproute or kernel doesn't support bond option 'prio'." + return 0 + fi + + for mode in $modes; do + prio_miimon $mode + done + prio_arp "active-backup" + prio_ns "active-backup" +} + +wait_mii_up() +{ + for i in $(seq 0 2); do + mii_status=$(cmd_jq "ip -n ${s_ns} -j -d link show eth$i" ".[].linkinfo.info_slave_data.mii_status") + [ ${mii_status} != "UP" ] && return 1 + done + return 0 +} + +arp_validate_test() +{ + local param="$1" + RET=0 + + # create bond + bond_reset "${param}" + + bond_check_connection + [ $RET -ne 0 ] && log_test "arp_validate" "$retmsg" + + # wait for a while to make sure the mii status stable + slowwait 5 wait_mii_up + for i in $(seq 0 2); do + mii_status=$(cmd_jq "ip -n ${s_ns} -j -d link show eth$i" ".[].linkinfo.info_slave_data.mii_status") + if [ ${mii_status} != "UP" ]; then + RET=1 + log_test "arp_validate" "interface eth$i mii_status $mii_status" + fi + done +} + +arp_validate_arp() +{ + local mode=$1 + local val + for val in $(seq 0 6); do + arp_validate_test "mode $mode arp_interval 100 arp_ip_target ${g_ip4} arp_validate $val" + log_test "arp_validate" "$mode arp_ip_target arp_validate $val" + done +} + +arp_validate_ns() +{ + local mode=$1 + local val + + if skip_ns; then + log_test_skip "arp_validate ns" "Current iproute or kernel doesn't support bond option 'ns_ip6_target'." + return 0 + fi + + for val in $(seq 0 6); do + arp_validate_test "mode $mode arp_interval 100 ns_ip6_target ${g_ip6} arp_validate $val" + log_test "arp_validate" "$mode ns_ip6_target arp_validate $val" + done +} + +arp_validate() +{ + arp_validate_arp "active-backup" + arp_validate_ns "active-backup" +} + +garp_test() +{ + local param="$1" + local active_slave exp_num real_num i + RET=0 + + # create bond + bond_reset "${param}" + + bond_check_connection + [ $RET -ne 0 ] && log_test "num_grat_arp" "$retmsg" + + + # Add tc rules to count GARP number + for i in $(seq 0 2); do + tc -n ${g_ns} filter add dev s$i ingress protocol arp pref 1 handle 101 \ + flower skip_hw arp_op request arp_sip ${s_ip4} arp_tip ${s_ip4} action pass + done + + # Do failover + active_slave=$(cmd_jq "ip -n ${s_ns} -d -j link show bond0" ".[].linkinfo.info_data.active_slave") + ip -n ${s_ns} link set ${active_slave} down + + # wait for active link change + slowwait 2 active_slave_changed $active_slave + + exp_num=$(echo "${param}" | cut -f6 -d ' ') + active_slave=$(cmd_jq "ip -n ${s_ns} -d -j link show bond0" ".[].linkinfo.info_data.active_slave") + slowwait_for_counter $((exp_num + 5)) $exp_num \ + tc_rule_handle_stats_get "dev s${active_slave#eth} ingress" 101 ".packets" "-n ${g_ns}" + + # check result + real_num=$(tc_rule_handle_stats_get "dev s${active_slave#eth} ingress" 101 ".packets" "-n ${g_ns}") + if [ "${real_num}" -ne "${exp_num}" ]; then + echo "$real_num garp packets sent on active slave ${active_slave}" + RET=1 + fi + + for i in $(seq 0 2); do + tc -n ${g_ns} filter del dev s$i ingress + done +} + +num_grat_arp() +{ + local val + for val in 10 20 30; do + garp_test "mode active-backup miimon 10 num_grat_arp $val peer_notify_delay 100" + log_test "num_grat_arp" "active-backup miimon num_grat_arp $val" + done +} + +trap cleanup EXIT + +setup_prepare +setup_wait +tests_run + +exit $EXIT_STATUS |