diff options
Diffstat (limited to 'tools/testing/selftests/drivers/net/netdevsim')
20 files changed, 3213 insertions, 101 deletions
diff --git a/tools/testing/selftests/drivers/net/netdevsim/Makefile b/tools/testing/selftests/drivers/net/netdevsim/Makefile new file mode 100644 index 000000000000..07b7c46d3311 --- /dev/null +++ b/tools/testing/selftests/drivers/net/netdevsim/Makefile @@ -0,0 +1,21 @@ +# SPDX-License-Identifier: GPL-2.0+ OR MIT + +TEST_PROGS = devlink.sh \ + devlink_in_netns.sh \ + devlink_trap.sh \ + ethtool-coalesce.sh \ + ethtool-features.sh \ + ethtool-fec.sh \ + ethtool-pause.sh \ + ethtool-ring.sh \ + fib.sh \ + fib_notifications.sh \ + hw_stats_l3.sh \ + macsec-offload.sh \ + nexthop.sh \ + peer.sh \ + psample.sh \ + tc-mq-visibility.sh \ + udp_tunnel_nic.sh \ + +include ../../../lib.mk diff --git a/tools/testing/selftests/drivers/net/netdevsim/config b/tools/testing/selftests/drivers/net/netdevsim/config new file mode 100644 index 000000000000..5117c78ddf0a --- /dev/null +++ b/tools/testing/selftests/drivers/net/netdevsim/config @@ -0,0 +1,11 @@ +CONFIG_DUMMY=y +CONFIG_GENEVE=m +CONFIG_IPV6=y +CONFIG_MACSEC=m +CONFIG_NETDEVSIM=m +CONFIG_NET_SCH_MQPRIO=y +CONFIG_NET_SCH_MULTIQ=y +CONFIG_NET_SCH_PRIO=y +CONFIG_PSAMPLE=y +CONFIG_PTP_1588_CLOCK_MOCK=y +CONFIG_VXLAN=m diff --git a/tools/testing/selftests/drivers/net/netdevsim/devlink.sh b/tools/testing/selftests/drivers/net/netdevsim/devlink.sh index 40909c254365..b5ea2526f23c 100755 --- a/tools/testing/selftests/drivers/net/netdevsim/devlink.sh +++ b/tools/testing/selftests/drivers/net/netdevsim/devlink.sh @@ -5,49 +5,69 @@ lib_dir=$(dirname $0)/../../../net/forwarding ALL_TESTS="fw_flash_test params_test regions_test reload_test \ netns_reload_test resource_test dev_info_test \ - empty_reporter_test dummy_reporter_test" + empty_reporter_test dummy_reporter_test rate_test" NUM_NETIFS=0 source $lib_dir/lib.sh BUS_ADDR=10 PORT_COUNT=4 +VF_COUNT=4 DEV_NAME=netdevsim$BUS_ADDR SYSFS_NET_DIR=/sys/bus/netdevsim/devices/$DEV_NAME/net/ DEBUGFS_DIR=/sys/kernel/debug/netdevsim/$DEV_NAME/ DL_HANDLE=netdevsim/$DEV_NAME +wait_for_devlink() +{ + "$@" | grep -q $DL_HANDLE +} + +devlink_wait() +{ + local timeout=$1 + + busywait "$timeout" wait_for_devlink devlink dev +} + fw_flash_test() { + DUMMYFILE=$(find /lib/firmware -type f -printf '%P\n' | head -1) RET=0 - devlink dev flash $DL_HANDLE file dummy + if [ -z "$DUMMYFILE" ] + then + echo "SKIP: unable to find suitable dummy firmware file" + return + fi + + devlink dev flash $DL_HANDLE file $DUMMYFILE check_err $? "Failed to flash with status updates on" - devlink dev flash $DL_HANDLE file dummy component fw.mgmt + devlink dev flash $DL_HANDLE file $DUMMYFILE component fw.mgmt check_err $? "Failed to flash with component attribute" - devlink dev flash $DL_HANDLE file dummy overwrite settings + devlink dev flash $DL_HANDLE file $DUMMYFILE overwrite settings check_fail $? "Flash with overwrite settings should be rejected" echo "1"> $DEBUGFS_DIR/fw_update_overwrite_mask check_err $? "Failed to change allowed overwrite mask" - devlink dev flash $DL_HANDLE file dummy overwrite settings + devlink dev flash $DL_HANDLE file $DUMMYFILE overwrite settings check_err $? "Failed to flash with settings overwrite enabled" - devlink dev flash $DL_HANDLE file dummy overwrite identifiers + devlink dev flash $DL_HANDLE file $DUMMYFILE overwrite identifiers check_fail $? "Flash with overwrite settings should be identifiers" echo "3"> $DEBUGFS_DIR/fw_update_overwrite_mask check_err $? "Failed to change allowed overwrite mask" - devlink dev flash $DL_HANDLE file dummy overwrite identifiers overwrite settings + devlink dev flash $DL_HANDLE file $DUMMYFILE overwrite identifiers overwrite settings check_err $? "Failed to flash with settings and identifiers overwrite enabled" echo "n"> $DEBUGFS_DIR/fw_update_status check_err $? "Failed to disable status updates" - devlink dev flash $DL_HANDLE file dummy + devlink dev flash $DL_HANDLE file $DUMMYFILE check_err $? "Failed to flash with status updates off" log_test "fw flash test" @@ -255,6 +275,9 @@ netns_reload_test() ip netns del testns2 ip netns del testns1 + # Wait until netns async cleanup is done. + devlink_wait 2000 + log_test "netns reload test" } @@ -347,6 +370,9 @@ resource_test() ip netns del testns2 ip netns del testns1 + # Wait until netns async cleanup is done. + devlink_wait 2000 + log_test "resource test" } @@ -495,8 +521,8 @@ dummy_reporter_test() check_reporter_info dummy healthy 3 3 10 true - echo 8192> $DEBUGFS_DIR/health/binary_len - check_fail $? "Failed set dummy reporter binary len to 8192" + echo 8192 > $DEBUGFS_DIR/health/binary_len + check_err $? "Failed set dummy reporter binary len to 8192" local dump=$(devlink health dump show $DL_HANDLE reporter dummy -j) check_err $? "Failed show dump of dummy reporter" @@ -507,6 +533,170 @@ dummy_reporter_test() log_test "dummy reporter test" } +rate_leafs_get() +{ + local handle=$1 + + cmd_jq "devlink port function rate show -j" \ + '.[] | to_entries | .[] | select(.value.type == "leaf") | .key | select(contains("'$handle'"))' +} + +rate_nodes_get() +{ + local handle=$1 + + cmd_jq "devlink port function rate show -j" \ + '.[] | to_entries | .[] | select(.value.type == "node") | .key | select(contains("'$handle'"))' +} + +rate_attr_set() +{ + local handle=$1 + local name=$2 + local value=$3 + local units=$4 + + devlink port function rate set $handle $name $value$units +} + +rate_attr_get() +{ + local handle=$1 + local name=$2 + + cmd_jq "devlink port function rate show $handle -j" '.[][].'$name +} + +rate_attr_tx_rate_check() +{ + local handle=$1 + local name=$2 + local rate=$3 + local debug_file=$4 + + rate_attr_set $handle $name $rate mbit + check_err $? "Failed to set $name value" + + local debug_value=$(cat $debug_file) + check_err $? "Failed to read $name value from debugfs" + [ "$debug_value" == "$rate" ] + check_err $? "Unexpected $name debug value $debug_value != $rate" + + local api_value=$(( $(rate_attr_get $handle $name) * 8 / 1000000 )) + check_err $? "Failed to get $name attr value" + [ "$api_value" == "$rate" ] + check_err $? "Unexpected $name attr value $api_value != $rate" +} + +rate_attr_parent_check() +{ + local handle=$1 + local parent=$2 + local debug_file=$3 + + rate_attr_set $handle parent $parent + check_err $? "Failed to set parent" + + debug_value=$(cat $debug_file) + check_err $? "Failed to get parent debugfs value" + [ "$debug_value" == "$parent" ] + check_err $? "Unexpected parent debug value $debug_value != $parent" + + api_value=$(rate_attr_get $r_obj parent) + check_err $? "Failed to get parent attr value" + [ "$api_value" == "$parent" ] + check_err $? "Unexpected parent attr value $api_value != $parent" +} + +rate_node_add() +{ + local handle=$1 + + devlink port function rate add $handle +} + +rate_node_del() +{ + local handle=$1 + + devlink port function rate del $handle +} + +rate_test() +{ + RET=0 + + echo $VF_COUNT > /sys/bus/netdevsim/devices/$DEV_NAME/sriov_numvfs + devlink dev eswitch set $DL_HANDLE mode switchdev + local leafs=`rate_leafs_get $DL_HANDLE` + local num_leafs=`echo $leafs | wc -w` + [ "$num_leafs" == "$VF_COUNT" ] + check_err $? "Expected $VF_COUNT rate leafs but got $num_leafs" + + rate=10 + for r_obj in $leafs + do + rate_attr_tx_rate_check $r_obj tx_share $rate \ + $DEBUGFS_DIR/ports/${r_obj##*/}/tx_share + rate=$(($rate+10)) + done + + rate=100 + for r_obj in $leafs + do + rate_attr_tx_rate_check $r_obj tx_max $rate \ + $DEBUGFS_DIR/ports/${r_obj##*/}/tx_max + rate=$(($rate+100)) + done + + local node1_name='group1' + local node1="$DL_HANDLE/$node1_name" + rate_node_add "$node1" + check_err $? "Failed to add node $node1" + + local num_nodes=`rate_nodes_get $DL_HANDLE | wc -w` + [ $num_nodes == 1 ] + check_err $? "Expected 1 rate node in output but got $num_nodes" + + local node_tx_share=10 + rate_attr_tx_rate_check $node1 tx_share $node_tx_share \ + $DEBUGFS_DIR/rate_nodes/${node1##*/}/tx_share + + local node_tx_max=100 + rate_attr_tx_rate_check $node1 tx_max $node_tx_max \ + $DEBUGFS_DIR/rate_nodes/${node1##*/}/tx_max + + rate_node_del "$node1" + check_err $? "Failed to delete node $node1" + local num_nodes=`rate_nodes_get $DL_HANDLE | wc -w` + [ $num_nodes == 0 ] + check_err $? "Expected 0 rate node but got $num_nodes" + + local node1_name='group1' + local node1="$DL_HANDLE/$node1_name" + rate_node_add "$node1" + check_err $? "Failed to add node $node1" + + rate_attr_parent_check $r_obj $node1_name \ + $DEBUGFS_DIR/ports/${r_obj##*/}/rate_parent + + local node2_name='group2' + local node2="$DL_HANDLE/$node2_name" + rate_node_add "$node2" + check_err $? "Failed to add node $node2" + + rate_attr_parent_check $node2 $node1_name \ + $DEBUGFS_DIR/rate_nodes/$node2_name/rate_parent + rate_node_del "$node2" + check_err $? "Failed to delete node $node2" + rate_attr_set "$r_obj" noparent + check_err $? "Failed to unset $r_obj parent node" + rate_node_del "$node1" + check_err $? "Failed to delete node $node1" + + log_test "rate test" +} + setup_prepare() { modprobe netdevsim diff --git a/tools/testing/selftests/drivers/net/netdevsim/devlink_trap.sh b/tools/testing/selftests/drivers/net/netdevsim/devlink_trap.sh index da49ad2761b5..b64d98ca0df7 100755 --- a/tools/testing/selftests/drivers/net/netdevsim/devlink_trap.sh +++ b/tools/testing/selftests/drivers/net/netdevsim/devlink_trap.sh @@ -24,13 +24,15 @@ ALL_TESTS=" NETDEVSIM_PATH=/sys/bus/netdevsim/ DEV_ADDR=1337 DEV=netdevsim${DEV_ADDR} -DEVLINK_DEV=netdevsim/${DEV} DEBUGFS_DIR=/sys/kernel/debug/netdevsim/$DEV/ SLEEP_TIME=1 NETDEV="" NUM_NETIFS=0 source $lib_dir/lib.sh + +DEVLINK_DEV= source $lib_dir/devlink_lib.sh +DEVLINK_DEV=netdevsim/${DEV} require_command udevadm @@ -45,6 +47,17 @@ if [ -d "${NETDEVSIM_PATH}/devices/netdevsim${DEV_ADDR}" ]; then exit 1 fi +check_netdev_down() +{ + state=$(cat /sys/class/net/${NETDEV}/flags) + + if [ $((state & 1)) -ne 0 ]; then + echo "WARNING: unexpected interface UP, disable NetworkManager?" + + ip link set dev $NETDEV down + fi +} + init_test() { RET=0 @@ -149,6 +162,7 @@ trap_stats_test() RET=0 + check_netdev_down for trap_name in $(devlink_traps_get); do devlink_trap_stats_idle_test $trap_name check_err $? "Stats of trap $trap_name not idle when netdev down" @@ -163,6 +177,16 @@ trap_stats_test() devlink_trap_action_set $trap_name "drop" devlink_trap_stats_idle_test $trap_name check_err $? "Stats of trap $trap_name not idle when action is drop" + + echo "y"> $DEBUGFS_DIR/fail_trap_drop_counter_get + devlink -s trap show $DEVLINK_DEV trap $trap_name &> /dev/null + check_fail $? "Managed to read trap (hard dropped) statistics when should not" + echo "n"> $DEBUGFS_DIR/fail_trap_drop_counter_get + devlink -s trap show $DEVLINK_DEV trap $trap_name &> /dev/null + check_err $? "Did not manage to read trap (hard dropped) statistics when should" + + devlink_trap_drop_stats_idle_test $trap_name + check_fail $? "Drop stats of trap $trap_name idle when should not" else devlink_trap_stats_idle_test $trap_name check_fail $? "Stats of non-drop trap $trap_name idle when should not" @@ -242,6 +266,7 @@ trap_group_stats_test() RET=0 + check_netdev_down for group_name in $(devlink_trap_groups_get); do devlink_trap_group_stats_idle_test $group_name check_err $? "Stats of trap group $group_name not idle when netdev down" diff --git a/tools/testing/selftests/drivers/net/netdevsim/ethtool-coalesce.sh b/tools/testing/selftests/drivers/net/netdevsim/ethtool-coalesce.sh new file mode 100755 index 000000000000..9adfba8f87e6 --- /dev/null +++ b/tools/testing/selftests/drivers/net/netdevsim/ethtool-coalesce.sh @@ -0,0 +1,132 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0-only + +source ethtool-common.sh + +function get_value { + local query="${SETTINGS_MAP[$1]}" + + echo $(ethtool -c $NSIM_NETDEV | \ + awk -F':' -v pattern="$query:" '$0 ~ pattern {gsub(/[ \t]/, "", $2); print $2}') +} + +function update_current_settings { + for key in ${!SETTINGS_MAP[@]}; do + CURRENT_SETTINGS[$key]=$(get_value $key) + done + echo ${CURRENT_SETTINGS[@]} +} + +if ! ethtool -h | grep -q coalesce; then + echo "SKIP: No --coalesce support in ethtool" + exit 4 +fi + +NSIM_NETDEV=$(make_netdev) + +set -o pipefail + +declare -A SETTINGS_MAP=( + ["rx-frames-low"]="rx-frame-low" + ["tx-frames-low"]="tx-frame-low" + ["rx-frames-high"]="rx-frame-high" + ["tx-frames-high"]="tx-frame-high" + ["rx-usecs"]="rx-usecs" + ["rx-frames"]="rx-frames" + ["rx-usecs-irq"]="rx-usecs-irq" + ["rx-frames-irq"]="rx-frames-irq" + ["tx-usecs"]="tx-usecs" + ["tx-frames"]="tx-frames" + ["tx-usecs-irq"]="tx-usecs-irq" + ["tx-frames-irq"]="tx-frames-irq" + ["stats-block-usecs"]="stats-block-usecs" + ["pkt-rate-low"]="pkt-rate-low" + ["rx-usecs-low"]="rx-usecs-low" + ["tx-usecs-low"]="tx-usecs-low" + ["pkt-rate-high"]="pkt-rate-high" + ["rx-usecs-high"]="rx-usecs-high" + ["tx-usecs-high"]="tx-usecs-high" + ["sample-interval"]="sample-interval" +) + +declare -A CURRENT_SETTINGS=( + ["rx-frames-low"]="" + ["tx-frames-low"]="" + ["rx-frames-high"]="" + ["tx-frames-high"]="" + ["rx-usecs"]="" + ["rx-frames"]="" + ["rx-usecs-irq"]="" + ["rx-frames-irq"]="" + ["tx-usecs"]="" + ["tx-frames"]="" + ["tx-usecs-irq"]="" + ["tx-frames-irq"]="" + ["stats-block-usecs"]="" + ["pkt-rate-low"]="" + ["rx-usecs-low"]="" + ["tx-usecs-low"]="" + ["pkt-rate-high"]="" + ["rx-usecs-high"]="" + ["tx-usecs-high"]="" + ["sample-interval"]="" +) + +declare -A EXPECTED_SETTINGS=( + ["rx-frames-low"]="" + ["tx-frames-low"]="" + ["rx-frames-high"]="" + ["tx-frames-high"]="" + ["rx-usecs"]="" + ["rx-frames"]="" + ["rx-usecs-irq"]="" + ["rx-frames-irq"]="" + ["tx-usecs"]="" + ["tx-frames"]="" + ["tx-usecs-irq"]="" + ["tx-frames-irq"]="" + ["stats-block-usecs"]="" + ["pkt-rate-low"]="" + ["rx-usecs-low"]="" + ["tx-usecs-low"]="" + ["pkt-rate-high"]="" + ["rx-usecs-high"]="" + ["tx-usecs-high"]="" + ["sample-interval"]="" +) + +# populate the expected settings map +for key in ${!SETTINGS_MAP[@]}; do + EXPECTED_SETTINGS[$key]=$(get_value $key) +done + +# test +for key in ${!SETTINGS_MAP[@]}; do + value=$((RANDOM % $((2**32-1)))) + + ethtool -C $NSIM_NETDEV "$key" "$value" + + EXPECTED_SETTINGS[$key]="$value" + expected=${EXPECTED_SETTINGS[@]} + current=$(update_current_settings) + + check $? "$current" "$expected" + set +x +done + +# bool settings which ethtool displays on the same line +ethtool -C $NSIM_NETDEV adaptive-rx on +s=$(ethtool -c $NSIM_NETDEV | grep -q "Adaptive RX: on TX: off") +check $? "$s" "" + +ethtool -C $NSIM_NETDEV adaptive-tx on +s=$(ethtool -c $NSIM_NETDEV | grep -q "Adaptive RX: on TX: on") +check $? "$s" "" + +if [ $num_errors -eq 0 ]; then + echo "PASSED all $((num_passes)) checks" + exit 0 +else + echo "FAILED $num_errors/$((num_errors+num_passes)) checks" + exit 1 +fi diff --git a/tools/testing/selftests/drivers/net/netdevsim/ethtool-common.sh b/tools/testing/selftests/drivers/net/netdevsim/ethtool-common.sh new file mode 100644 index 000000000000..80160579e0cc --- /dev/null +++ b/tools/testing/selftests/drivers/net/netdevsim/ethtool-common.sh @@ -0,0 +1,57 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0-only + +NSIM_ID=$((RANDOM % 1024)) +NSIM_DEV_SYS=/sys/bus/netdevsim/devices/netdevsim$NSIM_ID +NSIM_DEV_DFS=/sys/kernel/debug/netdevsim/netdevsim$NSIM_ID/ports/0 +NSIM_NETDEV= +num_passes=0 +num_errors=0 + +function cleanup_nsim { + if [ -e $NSIM_DEV_SYS ]; then + echo $NSIM_ID > /sys/bus/netdevsim/del_device + fi +} + +function cleanup { + cleanup_nsim +} + +trap cleanup EXIT + +function check { + local code=$1 + local str=$2 + local exp_str=$3 + local exp_fail=$4 + + [ -z "$exp_fail" ] && cop="-ne" || cop="-eq" + + if [ $code $cop 0 ]; then + ((num_errors++)) + return + fi + + if [ "$str" != "$exp_str" ]; then + echo -e "Expected: '$exp_str', got '$str'" + ((num_errors++)) + return + fi + + ((num_passes++)) +} + +function make_netdev { + # Make a netdevsim + old_netdevs=$(ls /sys/class/net) + + if ! $(lsmod | grep -q netdevsim); then + modprobe netdevsim + fi + + echo $NSIM_ID $@ > /sys/bus/netdevsim/new_device + udevadm settle + # get new device name + ls /sys/bus/netdevsim/devices/netdevsim${NSIM_ID}/net/ +} diff --git a/tools/testing/selftests/drivers/net/netdevsim/ethtool-features.sh b/tools/testing/selftests/drivers/net/netdevsim/ethtool-features.sh new file mode 100644 index 000000000000..bc210dc6ad2d --- /dev/null +++ b/tools/testing/selftests/drivers/net/netdevsim/ethtool-features.sh @@ -0,0 +1,31 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0-only + +source ethtool-common.sh + +NSIM_NETDEV=$(make_netdev) + +set -o pipefail + +FEATS=" + tx-checksum-ip-generic + tx-scatter-gather + tx-tcp-segmentation + generic-segmentation-offload + generic-receive-offload" + +for feat in $FEATS ; do + s=$(ethtool --json -k $NSIM_NETDEV | jq ".[].\"$feat\".active" 2>/dev/null) + check $? "$s" true + + s=$(ethtool --json -k $NSIM_NETDEV | jq ".[].\"$feat\".fixed" 2>/dev/null) + check $? "$s" false +done + +if [ $num_errors -eq 0 ]; then + echo "PASSED all $((num_passes)) checks" + exit 0 +else + echo "FAILED $num_errors/$((num_errors+num_passes)) checks" + exit 1 +fi diff --git a/tools/testing/selftests/drivers/net/netdevsim/ethtool-fec.sh b/tools/testing/selftests/drivers/net/netdevsim/ethtool-fec.sh new file mode 100755 index 000000000000..6c52ce1b0450 --- /dev/null +++ b/tools/testing/selftests/drivers/net/netdevsim/ethtool-fec.sh @@ -0,0 +1,114 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0-only + +source ethtool-common.sh + +NSIM_NETDEV=$(make_netdev) +[ a$ETHTOOL == a ] && ETHTOOL=ethtool + +set -o pipefail + +# Since commit 2b3ddcb35357 ("ethtool: fec: Change the prompt ...") +# in ethtool CLI the Configured lines start with Supported/Configured. +configured=$($ETHTOOL --show-fec $NSIM_NETDEV | tail -2 | head -1 | cut -d' ' -f1) + +# netdevsim starts out with None/None +s=$($ETHTOOL --show-fec $NSIM_NETDEV | tail -2) +check $? "$s" "$configured FEC encodings: None +Active FEC encoding: None" + +# Test Auto +$ETHTOOL --set-fec $NSIM_NETDEV encoding auto +check $? +s=$($ETHTOOL --show-fec $NSIM_NETDEV | tail -2) +check $? "$s" "$configured FEC encodings: Auto +Active FEC encoding: Off" + +# Test case in-sensitivity +for o in off Off OFF; do + $ETHTOOL --set-fec $NSIM_NETDEV encoding $o + check $? + s=$($ETHTOOL --show-fec $NSIM_NETDEV | tail -2) + check $? "$s" "$configured FEC encodings: Off +Active FEC encoding: Off" +done + +for o in BaseR baser BAser; do + $ETHTOOL --set-fec $NSIM_NETDEV encoding $o + check $? + s=$($ETHTOOL --show-fec $NSIM_NETDEV | tail -2) + check $? "$s" "$configured FEC encodings: BaseR +Active FEC encoding: BaseR" +done + +for o in llrs rs; do + $ETHTOOL --set-fec $NSIM_NETDEV encoding $o + check $? + s=$($ETHTOOL --show-fec $NSIM_NETDEV | tail -2) + check $? "$s" "$configured FEC encodings: ${o^^} +Active FEC encoding: ${o^^}" +done + +# Test multiple bits +$ETHTOOL --set-fec $NSIM_NETDEV encoding rs llrs +check $? +s=$($ETHTOOL --show-fec $NSIM_NETDEV | tail -2) +check $? "$s" "$configured FEC encodings: RS LLRS +Active FEC encoding: LLRS" + +$ETHTOOL --set-fec $NSIM_NETDEV encoding rs off auto +check $? +s=$($ETHTOOL --show-fec $NSIM_NETDEV | tail -2) +check $? "$s" "$configured FEC encodings: Auto Off RS +Active FEC encoding: RS" + +# Make sure other link modes are rejected +$ETHTOOL --set-fec $NSIM_NETDEV encoding FIBRE 2>/dev/null +check $? '' '' 1 + +$ETHTOOL --set-fec $NSIM_NETDEV encoding bla-bla-bla 2>/dev/null +check $? '' '' 1 + +# Try JSON +$ETHTOOL --json --show-fec $NSIM_NETDEV | jq empty >>/dev/null 2>&1 +if [ $? -eq 0 ]; then + $ETHTOOL --set-fec $NSIM_NETDEV encoding auto + check $? + + s=$($ETHTOOL --json --show-fec $NSIM_NETDEV | jq '.[].config[]') + check $? "$s" '"Auto"' + s=$($ETHTOOL --json --show-fec $NSIM_NETDEV | jq '.[].active[]') + check $? "$s" '"Off"' + + $ETHTOOL --set-fec $NSIM_NETDEV encoding auto RS + check $? + + s=$($ETHTOOL --json --show-fec $NSIM_NETDEV | jq '.[].config[]') + check $? "$s" '"Auto" +"RS"' + s=$($ETHTOOL --json --show-fec $NSIM_NETDEV | jq '.[].active[]') + check $? "$s" '"RS"' +fi + +# Test error injection +echo 11 > $NSIM_DEV_DFS/ethtool/get_err + +$ETHTOOL --show-fec $NSIM_NETDEV >>/dev/null 2>&1 +check $? '' '' 1 + +echo 0 > $NSIM_DEV_DFS/ethtool/get_err +echo 11 > $NSIM_DEV_DFS/ethtool/set_err + +$ETHTOOL --show-fec $NSIM_NETDEV >>/dev/null 2>&1 +check $? + +$ETHTOOL --set-fec $NSIM_NETDEV encoding RS 2>/dev/null +check $? '' '' 1 + +if [ $num_errors -eq 0 ]; then + echo "PASSED all $((num_passes)) checks" + exit 0 +else + echo "FAILED $num_errors/$((num_errors+num_passes)) checks" + exit 1 +fi diff --git a/tools/testing/selftests/drivers/net/netdevsim/ethtool-pause.sh b/tools/testing/selftests/drivers/net/netdevsim/ethtool-pause.sh index 25c896b9e2eb..b4a7abfe5454 100755 --- a/tools/testing/selftests/drivers/net/netdevsim/ethtool-pause.sh +++ b/tools/testing/selftests/drivers/net/netdevsim/ethtool-pause.sh @@ -1,60 +1,7 @@ #!/bin/bash # SPDX-License-Identifier: GPL-2.0-only -NSIM_ID=$((RANDOM % 1024)) -NSIM_DEV_SYS=/sys/bus/netdevsim/devices/netdevsim$NSIM_ID -NSIM_DEV_DFS=/sys/kernel/debug/netdevsim/netdevsim$NSIM_ID/ports/0 -NSIM_NETDEV= -num_passes=0 -num_errors=0 - -function cleanup_nsim { - if [ -e $NSIM_DEV_SYS ]; then - echo $NSIM_ID > /sys/bus/netdevsim/del_device - fi -} - -function cleanup { - cleanup_nsim -} - -trap cleanup EXIT - -function get_netdev_name { - local -n old=$1 - - new=$(ls /sys/class/net) - - for netdev in $new; do - for check in $old; do - [ $netdev == $check ] && break - done - - if [ $netdev != $check ]; then - echo $netdev - break - fi - done -} - -function check { - local code=$1 - local str=$2 - local exp_str=$3 - - if [ $code -ne 0 ]; then - ((num_errors++)) - return - fi - - if [ "$str" != "$exp_str" ]; then - echo -e "Expected: '$exp_str', got '$str'" - ((num_errors++)) - return - fi - - ((num_passes++)) -} +source ethtool-common.sh # Bail if ethtool is too old if ! ethtool -h | grep include-stat 2>&1 >/dev/null; then @@ -62,13 +9,7 @@ if ! ethtool -h | grep include-stat 2>&1 >/dev/null; then exit 4 fi -# Make a netdevsim -old_netdevs=$(ls /sys/class/net) - -modprobe netdevsim -echo $NSIM_ID > /sys/bus/netdevsim/new_device - -NSIM_NETDEV=`get_netdev_name old_netdevs` +NSIM_NETDEV=$(make_netdev) set -o pipefail diff --git a/tools/testing/selftests/drivers/net/netdevsim/ethtool-ring.sh b/tools/testing/selftests/drivers/net/netdevsim/ethtool-ring.sh new file mode 100755 index 000000000000..c969559ffa7a --- /dev/null +++ b/tools/testing/selftests/drivers/net/netdevsim/ethtool-ring.sh @@ -0,0 +1,85 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0-only + +source ethtool-common.sh + +function get_value { + local query="${SETTINGS_MAP[$1]}" + + echo $(ethtool -g $NSIM_NETDEV | \ + tail -n +$CURR_SETT_LINE | \ + awk -F':' -v pattern="$query:" '$0 ~ pattern {gsub(/[\t ]/, "", $2); print $2}') +} + +function update_current_settings { + for key in ${!SETTINGS_MAP[@]}; do + CURRENT_SETTINGS[$key]=$(get_value $key) + done + echo ${CURRENT_SETTINGS[@]} +} + +if ! ethtool -h | grep -q set-ring >/dev/null; then + echo "SKIP: No --set-ring support in ethtool" + exit 4 +fi + +NSIM_NETDEV=$(make_netdev) + +set -o pipefail + +declare -A SETTINGS_MAP=( + ["rx"]="RX" + ["rx-mini"]="RX Mini" + ["rx-jumbo"]="RX Jumbo" + ["tx"]="TX" +) + +declare -A EXPECTED_SETTINGS=( + ["rx"]="" + ["rx-mini"]="" + ["rx-jumbo"]="" + ["tx"]="" +) + +declare -A CURRENT_SETTINGS=( + ["rx"]="" + ["rx-mini"]="" + ["rx-jumbo"]="" + ["tx"]="" +) + +MAX_VALUE=$((RANDOM % $((2**32-1)))) +RING_MAX_LIST=$(ls $NSIM_DEV_DFS/ethtool/ring/) + +for ring_max_entry in $RING_MAX_LIST; do + echo $MAX_VALUE > $NSIM_DEV_DFS/ethtool/ring/$ring_max_entry +done + +CURR_SETT_LINE=$(ethtool -g $NSIM_NETDEV | grep -i -m1 -n 'Current hardware settings' | cut -f1 -d:) + +# populate the expected settings map +for key in ${!SETTINGS_MAP[@]}; do + EXPECTED_SETTINGS[$key]=$(get_value $key) +done + +# test +for key in ${!SETTINGS_MAP[@]}; do + value=$((RANDOM % $MAX_VALUE)) + + ethtool -G $NSIM_NETDEV "$key" "$value" + + EXPECTED_SETTINGS[$key]="$value" + expected=${EXPECTED_SETTINGS[@]} + current=$(update_current_settings) + + check $? "$current" "$expected" + set +x +done + +if [ $num_errors -eq 0 ]; then + echo "PASSED all $((num_passes)) checks" + exit 0 +else + echo "FAILED $num_errors/$((num_errors+num_passes)) checks" + exit 1 +fi diff --git a/tools/testing/selftests/drivers/net/netdevsim/fib.sh b/tools/testing/selftests/drivers/net/netdevsim/fib.sh index 2f87c3be76a9..6800de816e8b 100755 --- a/tools/testing/selftests/drivers/net/netdevsim/fib.sh +++ b/tools/testing/selftests/drivers/net/netdevsim/fib.sh @@ -16,6 +16,7 @@ ALL_TESTS=" ipv4_replay ipv4_flush ipv4_error_path + ipv4_delete_fail ipv6_add ipv6_metric ipv6_append_single @@ -29,17 +30,21 @@ ALL_TESTS=" ipv6_replay_single ipv6_replay_multipath ipv6_error_path + ipv6_delete_fail " NETDEVSIM_PATH=/sys/bus/netdevsim/ DEV_ADDR=1337 DEV=netdevsim${DEV_ADDR} -DEVLINK_DEV=netdevsim/${DEV} SYSFS_NET_DIR=/sys/bus/netdevsim/devices/$DEV/net/ +DEBUGFS_DIR=/sys/kernel/debug/netdevsim/$DEV/ NUM_NETIFS=0 source $lib_dir/lib.sh -source $lib_dir/devlink_lib.sh source $lib_dir/fib_offload_lib.sh +DEVLINK_DEV= +source $lib_dir/devlink_lib.sh +DEVLINK_DEV=netdevsim/${DEV} + ipv4_identical_routes() { fib_ipv4_identical_routes_test "testns1" @@ -155,6 +160,27 @@ ipv4_error_path() ipv4_error_path_replay } +ipv4_delete_fail() +{ + RET=0 + + echo "y" > $DEBUGFS_DIR/fib/fail_route_delete + + ip -n testns1 link add name dummy1 type dummy + ip -n testns1 link set dev dummy1 up + + ip -n testns1 route add 192.0.2.0/24 dev dummy1 + ip -n testns1 route del 192.0.2.0/24 dev dummy1 &> /dev/null + + # We should not be able to delete the netdev if we are leaking a + # reference. + ip -n testns1 link del dev dummy1 + + log_test "IPv4 route delete failure" + + echo "n" > $DEBUGFS_DIR/fib/fail_route_delete +} + ipv6_add() { fib_ipv6_add_test "testns1" @@ -302,6 +328,37 @@ ipv6_error_path() ipv6_error_path_replay } +ipv6_delete_fail() +{ + RET=0 + + echo "y" > $DEBUGFS_DIR/fib/fail_route_delete + + ip -n testns1 link add name dummy1 type dummy + ip -n testns1 link set dev dummy1 up + + ip -n testns1 route add 2001:db8:1::/64 dev dummy1 + ip -n testns1 route del 2001:db8:1::/64 dev dummy1 &> /dev/null + + # We should not be able to delete the netdev if we are leaking a + # reference. + ip -n testns1 link del dev dummy1 + + log_test "IPv6 route delete failure" + + echo "n" > $DEBUGFS_DIR/fib/fail_route_delete +} + +fib_notify_on_flag_change_set() +{ + local notify=$1; shift + + ip netns exec testns1 sysctl -qw net.ipv4.fib_notify_on_flag_change=$notify + ip netns exec testns1 sysctl -qw net.ipv6.fib_notify_on_flag_change=$notify + + log_info "Set fib_notify_on_flag_change to $notify" +} + setup_prepare() { local netdev @@ -336,6 +393,10 @@ trap cleanup EXIT setup_prepare +fib_notify_on_flag_change_set 1 +tests_run + +fib_notify_on_flag_change_set 0 tests_run exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/netdevsim/fib_notifications.sh b/tools/testing/selftests/drivers/net/netdevsim/fib_notifications.sh new file mode 100755 index 000000000000..9896580c3d85 --- /dev/null +++ b/tools/testing/selftests/drivers/net/netdevsim/fib_notifications.sh @@ -0,0 +1,430 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + ipv4_route_addition_test + ipv4_route_deletion_test + ipv4_route_replacement_test + ipv4_route_offload_failed_test + ipv6_route_addition_test + ipv6_route_deletion_test + ipv6_route_replacement_test + ipv6_route_offload_failed_test +" + +NETDEVSIM_PATH=/sys/bus/netdevsim/ +DEV_ADDR=1337 +DEV=netdevsim${DEV_ADDR} +DEVLINK_DEV=netdevsim/${DEV} +SYSFS_NET_DIR=/sys/bus/netdevsim/devices/$DEV/net/ +DEBUGFS_DIR=/sys/kernel/debug/netdevsim/$DEV/ +NUM_NETIFS=0 +source $lib_dir/lib.sh + +check_rt_offload_failed() +{ + local outfile=$1; shift + local line + + # Make sure that the first notification was emitted without + # RTM_F_OFFLOAD_FAILED flag and the second with RTM_F_OFFLOAD_FAILED + # flag + head -n 1 $outfile | grep -q "rt_offload_failed" + if [[ $? -eq 0 ]]; then + return 1 + fi + + head -n 2 $outfile | tail -n 1 | grep -q "rt_offload_failed" +} + +check_rt_trap() +{ + local outfile=$1; shift + local line + + # Make sure that the first notification was emitted without RTM_F_TRAP + # flag and the second with RTM_F_TRAP flag + head -n 1 $outfile | grep -q "rt_trap" + if [[ $? -eq 0 ]]; then + return 1 + fi + + head -n 2 $outfile | tail -n 1 | grep -q "rt_trap" +} + +route_notify_check() +{ + local outfile=$1; shift + local expected_num_lines=$1; shift + local offload_failed=${1:-0}; shift + + # check the monitor results + lines=`wc -l $outfile | cut "-d " -f1` + test $lines -eq $expected_num_lines + check_err $? "$expected_num_lines notifications were expected but $lines were received" + + if [[ $expected_num_lines -eq 1 ]]; then + return + fi + + if [[ $offload_failed -eq 0 ]]; then + check_rt_trap $outfile + check_err $? "Wrong RTM_F_TRAP flags in notifications" + else + check_rt_offload_failed $outfile + check_err $? "Wrong RTM_F_OFFLOAD_FAILED flags in notifications" + fi +} + +route_addition_check() +{ + local ip=$1; shift + local notify=$1; shift + local route=$1; shift + local expected_num_notifications=$1; shift + local offload_failed=${1:-0}; shift + + ip netns exec testns1 sysctl -qw net.$ip.fib_notify_on_flag_change=$notify + + local outfile=$(mktemp) + + $IP monitor route &> $outfile & + sleep 1 + $IP route add $route dev dummy1 + sleep 1 + kill_process %% + + route_notify_check $outfile $expected_num_notifications $offload_failed + rm -f $outfile + + $IP route del $route dev dummy1 +} + +ipv4_route_addition_test() +{ + RET=0 + + local ip="ipv4" + local route=192.0.2.0/24 + + # Make sure a single notification will be emitted for the programmed + # route. + local notify=0 + local expected_num_notifications=1 + # route_addition_check will assign value to RET. + route_addition_check $ip $notify $route $expected_num_notifications + + # Make sure two notifications will be emitted for the programmed route. + notify=1 + expected_num_notifications=2 + route_addition_check $ip $notify $route $expected_num_notifications + + # notify=2 means emit notifications only for failed route installation, + # make sure a single notification will be emitted for the programmed + # route. + notify=2 + expected_num_notifications=1 + route_addition_check $ip $notify $route $expected_num_notifications + + log_test "IPv4 route addition" +} + +route_deletion_check() +{ + local ip=$1; shift + local notify=$1; shift + local route=$1; shift + local expected_num_notifications=$1; shift + + ip netns exec testns1 sysctl -qw net.$ip.fib_notify_on_flag_change=$notify + $IP route add $route dev dummy1 + sleep 1 + + local outfile=$(mktemp) + + $IP monitor route &> $outfile & + sleep 1 + $IP route del $route dev dummy1 + sleep 1 + kill_process %% + + route_notify_check $outfile $expected_num_notifications + rm -f $outfile +} + +ipv4_route_deletion_test() +{ + RET=0 + + local ip="ipv4" + local route=192.0.2.0/24 + local expected_num_notifications=1 + + # Make sure a single notification will be emitted for the deleted route, + # regardless of fib_notify_on_flag_change value. + local notify=0 + # route_deletion_check will assign value to RET. + route_deletion_check $ip $notify $route $expected_num_notifications + + notify=1 + route_deletion_check $ip $notify $route $expected_num_notifications + + log_test "IPv4 route deletion" +} + +route_replacement_check() +{ + local ip=$1; shift + local notify=$1; shift + local route=$1; shift + local expected_num_notifications=$1; shift + + ip netns exec testns1 sysctl -qw net.$ip.fib_notify_on_flag_change=$notify + $IP route add $route dev dummy1 + sleep 1 + + local outfile=$(mktemp) + + $IP monitor route &> $outfile & + sleep 1 + $IP route replace $route dev dummy2 + sleep 1 + kill_process %% + + route_notify_check $outfile $expected_num_notifications + rm -f $outfile + + $IP route del $route dev dummy2 +} + +ipv4_route_replacement_test() +{ + RET=0 + + local ip="ipv4" + local route=192.0.2.0/24 + + $IP link add name dummy2 type dummy + $IP link set dev dummy2 up + + # Make sure a single notification will be emitted for the new route. + local notify=0 + local expected_num_notifications=1 + # route_replacement_check will assign value to RET. + route_replacement_check $ip $notify $route $expected_num_notifications + + # Make sure two notifications will be emitted for the new route. + notify=1 + expected_num_notifications=2 + route_replacement_check $ip $notify $route $expected_num_notifications + + # notify=2 means emit notifications only for failed route installation, + # make sure a single notification will be emitted for the new route. + notify=2 + expected_num_notifications=1 + route_replacement_check $ip $notify $route $expected_num_notifications + + $IP link del name dummy2 + + log_test "IPv4 route replacement" +} + +ipv4_route_offload_failed_test() +{ + + RET=0 + + local ip="ipv4" + local route=192.0.2.0/24 + local offload_failed=1 + + echo "y"> $DEBUGFS_DIR/fib/fail_route_offload + check_err $? "Failed to setup route offload to fail" + + # Make sure a single notification will be emitted for the programmed + # route. + local notify=0 + local expected_num_notifications=1 + route_addition_check $ip $notify $route $expected_num_notifications \ + $offload_failed + + # Make sure two notifications will be emitted for the new route. + notify=1 + expected_num_notifications=2 + route_addition_check $ip $notify $route $expected_num_notifications \ + $offload_failed + + # notify=2 means emit notifications only for failed route installation, + # make sure two notifications will be emitted for the new route. + notify=2 + expected_num_notifications=2 + route_addition_check $ip $notify $route $expected_num_notifications \ + $offload_failed + + echo "n"> $DEBUGFS_DIR/fib/fail_route_offload + check_err $? "Failed to setup route offload not to fail" + + log_test "IPv4 route offload failed" +} + +ipv6_route_addition_test() +{ + RET=0 + + local ip="ipv6" + local route=2001:db8:1::/64 + + # Make sure a single notification will be emitted for the programmed + # route. + local notify=0 + local expected_num_notifications=1 + route_addition_check $ip $notify $route $expected_num_notifications + + # Make sure two notifications will be emitted for the programmed route. + notify=1 + expected_num_notifications=2 + route_addition_check $ip $notify $route $expected_num_notifications + + # notify=2 means emit notifications only for failed route installation, + # make sure a single notification will be emitted for the programmed + # route. + notify=2 + expected_num_notifications=1 + route_addition_check $ip $notify $route $expected_num_notifications + + log_test "IPv6 route addition" +} + +ipv6_route_deletion_test() +{ + RET=0 + + local ip="ipv6" + local route=2001:db8:1::/64 + local expected_num_notifications=1 + + # Make sure a single notification will be emitted for the deleted route, + # regardless of fib_notify_on_flag_change value. + local notify=0 + route_deletion_check $ip $notify $route $expected_num_notifications + + notify=1 + route_deletion_check $ip $notify $route $expected_num_notifications + + log_test "IPv6 route deletion" +} + +ipv6_route_replacement_test() +{ + RET=0 + + local ip="ipv6" + local route=2001:db8:1::/64 + + $IP link add name dummy2 type dummy + $IP link set dev dummy2 up + + # Make sure a single notification will be emitted for the new route. + local notify=0 + local expected_num_notifications=1 + route_replacement_check $ip $notify $route $expected_num_notifications + + # Make sure two notifications will be emitted for the new route. + notify=1 + expected_num_notifications=2 + route_replacement_check $ip $notify $route $expected_num_notifications + + # notify=2 means emit notifications only for failed route installation, + # make sure a single notification will be emitted for the new route. + notify=2 + expected_num_notifications=1 + route_replacement_check $ip $notify $route $expected_num_notifications + + $IP link del name dummy2 + + log_test "IPv6 route replacement" +} + +ipv6_route_offload_failed_test() +{ + + RET=0 + + local ip="ipv6" + local route=2001:db8:1::/64 + local offload_failed=1 + + echo "y"> $DEBUGFS_DIR/fib/fail_route_offload + check_err $? "Failed to setup route offload to fail" + + # Make sure a single notification will be emitted for the programmed + # route. + local notify=0 + local expected_num_notifications=1 + route_addition_check $ip $notify $route $expected_num_notifications \ + $offload_failed + + # Make sure two notifications will be emitted for the new route. + notify=1 + expected_num_notifications=2 + route_addition_check $ip $notify $route $expected_num_notifications \ + $offload_failed + + # notify=2 means emit notifications only for failed route installation, + # make sure two notifications will be emitted for the new route. + notify=2 + expected_num_notifications=2 + route_addition_check $ip $notify $route $expected_num_notifications \ + $offload_failed + + echo "n"> $DEBUGFS_DIR/fib/fail_route_offload + check_err $? "Failed to setup route offload not to fail" + + log_test "IPv6 route offload failed" +} + +setup_prepare() +{ + modprobe netdevsim &> /dev/null + echo "$DEV_ADDR 1" > ${NETDEVSIM_PATH}/new_device + while [ ! -d $SYSFS_NET_DIR ] ; do :; done + + ip netns add testns1 + + if [ $? -ne 0 ]; then + echo "Failed to add netns \"testns1\"" + exit 1 + fi + + devlink dev reload $DEVLINK_DEV netns testns1 + + if [ $? -ne 0 ]; then + echo "Failed to reload into netns \"testns1\"" + exit 1 + fi + + IP="ip -n testns1" + + $IP link add name dummy1 type dummy + $IP link set dev dummy1 up +} + +cleanup() +{ + pre_cleanup + + $IP link del name dummy1 + ip netns del testns1 + echo "$DEV_ADDR" > ${NETDEVSIM_PATH}/del_device + modprobe -r netdevsim &> /dev/null +} + +trap cleanup EXIT + +setup_prepare + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/netdevsim/hw_stats_l3.sh b/tools/testing/selftests/drivers/net/netdevsim/hw_stats_l3.sh new file mode 100755 index 000000000000..cba5ac08426b --- /dev/null +++ b/tools/testing/selftests/drivers/net/netdevsim/hw_stats_l3.sh @@ -0,0 +1,421 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + l3_reporting_test + l3_fail_next_test + l3_counter_test + l3_rollback_test + l3_monitor_test +" + +NETDEVSIM_PATH=/sys/bus/netdevsim/ +DEV_ADDR_1=1337 +DEV_ADDR_2=1057 +DEV_ADDR_3=5417 +NUM_NETIFS=0 +source $lib_dir/lib.sh + +DUMMY_IFINDEX= + +DEV_ADDR() +{ + local n=$1; shift + local var=DEV_ADDR_$n + + echo ${!var} +} + +DEV() +{ + echo netdevsim$(DEV_ADDR $1) +} + +DEVLINK_DEV() +{ + echo netdevsim/$(DEV $1) +} + +SYSFS_NET_DIR() +{ + echo /sys/bus/netdevsim/devices/$(DEV $1)/net/ +} + +DEBUGFS_DIR() +{ + echo /sys/kernel/debug/netdevsim/$(DEV $1)/ +} + +nsim_add() +{ + local n=$1; shift + + echo "$(DEV_ADDR $n) 1" > ${NETDEVSIM_PATH}/new_device + while [ ! -d $(SYSFS_NET_DIR $n) ] ; do :; done +} + +nsim_reload() +{ + local n=$1; shift + local ns=$1; shift + + devlink dev reload $(DEVLINK_DEV $n) netns $ns + + if [ $? -ne 0 ]; then + echo "Failed to reload $(DEV $n) into netns \"testns1\"" + exit 1 + fi + +} + +nsim_del() +{ + local n=$1; shift + + echo "$(DEV_ADDR $n)" > ${NETDEVSIM_PATH}/del_device +} + +nsim_hwstats_toggle() +{ + local action=$1; shift + local instance=$1; shift + local netdev=$1; shift + local type=$1; shift + + local ifindex=$($IP -j link show dev $netdev | jq '.[].ifindex') + + echo $ifindex > $(DEBUGFS_DIR $instance)/hwstats/$type/$action +} + +nsim_hwstats_enable() +{ + nsim_hwstats_toggle enable_ifindex "$@" +} + +nsim_hwstats_disable() +{ + nsim_hwstats_toggle disable_ifindex "$@" +} + +nsim_hwstats_fail_next_enable() +{ + nsim_hwstats_toggle fail_next_enable "$@" +} + +setup_prepare() +{ + modprobe netdevsim &> /dev/null + nsim_add 1 + nsim_add 2 + nsim_add 3 + + ip netns add testns1 + + if [ $? -ne 0 ]; then + echo "Failed to add netns \"testns1\"" + exit 1 + fi + + nsim_reload 1 testns1 + nsim_reload 2 testns1 + nsim_reload 3 testns1 + + IP="ip -n testns1" + + $IP link add name dummy1 type dummy + $IP link set dev dummy1 up + DUMMY_IFINDEX=$($IP -j link show dev dummy1 | jq '.[].ifindex') +} + +cleanup() +{ + pre_cleanup + + $IP link del name dummy1 + ip netns del testns1 + nsim_del 3 + nsim_del 2 + nsim_del 1 + modprobe -r netdevsim &> /dev/null +} + +netdev_hwstats_used() +{ + local netdev=$1; shift + local type=$1; shift + + $IP -j stats show dev "$netdev" group offload subgroup hw_stats_info | + jq '.[].info.l3_stats.used' +} + +netdev_check_used() +{ + local netdev=$1; shift + local type=$1; shift + + [[ $(netdev_hwstats_used $netdev $type) == "true" ]] +} + +netdev_check_unused() +{ + local netdev=$1; shift + local type=$1; shift + + [[ $(netdev_hwstats_used $netdev $type) == "false" ]] +} + +netdev_hwstats_request() +{ + local netdev=$1; shift + local type=$1; shift + + $IP -j stats show dev "$netdev" group offload subgroup hw_stats_info | + jq ".[].info.${type}_stats.request" +} + +netdev_check_requested() +{ + local netdev=$1; shift + local type=$1; shift + + [[ $(netdev_hwstats_request $netdev $type) == "true" ]] +} + +netdev_check_unrequested() +{ + local netdev=$1; shift + local type=$1; shift + + [[ $(netdev_hwstats_request $netdev $type) == "false" ]] +} + +reporting_test() +{ + local type=$1; shift + local instance=1 + + RET=0 + + [[ -n $(netdev_hwstats_used dummy1 $type) ]] + check_err $? "$type stats not reported" + + netdev_check_unused dummy1 $type + check_err $? "$type stats reported as used before either device or netdevsim request" + + nsim_hwstats_enable $instance dummy1 $type + netdev_check_unused dummy1 $type + check_err $? "$type stats reported as used before device request" + netdev_check_unrequested dummy1 $type + check_err $? "$type stats reported as requested before device request" + + $IP stats set dev dummy1 ${type}_stats on + netdev_check_used dummy1 $type + check_err $? "$type stats reported as not used after both device and netdevsim request" + netdev_check_requested dummy1 $type + check_err $? "$type stats reported as not requested after device request" + + nsim_hwstats_disable $instance dummy1 $type + netdev_check_unused dummy1 $type + check_err $? "$type stats reported as used after netdevsim request withdrawn" + + nsim_hwstats_enable $instance dummy1 $type + netdev_check_used dummy1 $type + check_err $? "$type stats reported as not used after netdevsim request reenabled" + + $IP stats set dev dummy1 ${type}_stats off + netdev_check_unused dummy1 $type + check_err $? "$type stats reported as used after device request withdrawn" + netdev_check_unrequested dummy1 $type + check_err $? "$type stats reported as requested after device request withdrawn" + + nsim_hwstats_disable $instance dummy1 $type + netdev_check_unused dummy1 $type + check_err $? "$type stats reported as used after both requests withdrawn" + + log_test "Reporting of $type stats usage" +} + +l3_reporting_test() +{ + reporting_test l3 +} + +__fail_next_test() +{ + local instance=$1; shift + local type=$1; shift + + RET=0 + + netdev_check_unused dummy1 $type + check_err $? "$type stats reported as used before either device or netdevsim request" + + nsim_hwstats_enable $instance dummy1 $type + nsim_hwstats_fail_next_enable $instance dummy1 $type + netdev_check_unused dummy1 $type + check_err $? "$type stats reported as used before device request" + netdev_check_unrequested dummy1 $type + check_err $? "$type stats reported as requested before device request" + + $IP stats set dev dummy1 ${type}_stats on 2>/dev/null + check_fail $? "$type stats request not bounced as it should have been" + netdev_check_unused dummy1 $type + check_err $? "$type stats reported as used after bounce" + netdev_check_unrequested dummy1 $type + check_err $? "$type stats reported as requested after bounce" + + $IP stats set dev dummy1 ${type}_stats on + check_err $? "$type stats request failed when it shouldn't have" + netdev_check_used dummy1 $type + check_err $? "$type stats reported as not used after both device and netdevsim request" + netdev_check_requested dummy1 $type + check_err $? "$type stats reported as not requested after device request" + + $IP stats set dev dummy1 ${type}_stats off + nsim_hwstats_disable $instance dummy1 $type + + log_test "Injected failure of $type stats enablement (netdevsim #$instance)" +} + +fail_next_test() +{ + __fail_next_test 1 "$@" + __fail_next_test 2 "$@" + __fail_next_test 3 "$@" +} + +l3_fail_next_test() +{ + fail_next_test l3 +} + +get_hwstat() +{ + local netdev=$1; shift + local type=$1; shift + local selector=$1; shift + + $IP -j stats show dev $netdev group offload subgroup ${type}_stats | + jq ".[0].stats64.${selector}" +} + +counter_test() +{ + local type=$1; shift + local instance=1 + + RET=0 + + nsim_hwstats_enable $instance dummy1 $type + $IP stats set dev dummy1 ${type}_stats on + netdev_check_used dummy1 $type + check_err $? "$type stats reported as not used after both device and netdevsim request" + + # Netdevsim counts 10pps on ingress. We should see maybe a couple + # packets, unless things take a reeealy long time. + local pkts=$(get_hwstat dummy1 l3 rx.packets) + ((pkts < 10)) + check_err $? "$type stats show >= 10 packets after first enablement" + + sleep 2.5 + + local pkts=$(get_hwstat dummy1 l3 rx.packets) + ((pkts >= 20)) + check_err $? "$type stats show < 20 packets after 2.5s passed" + + $IP stats set dev dummy1 ${type}_stats off + + sleep 2 + + $IP stats set dev dummy1 ${type}_stats on + local pkts=$(get_hwstat dummy1 l3 rx.packets) + ((pkts < 10)) + check_err $? "$type stats show >= 10 packets after second enablement" + + $IP stats set dev dummy1 ${type}_stats off + nsim_hwstats_fail_next_enable $instance dummy1 $type + $IP stats set dev dummy1 ${type}_stats on 2>/dev/null + check_fail $? "$type stats request not bounced as it should have been" + + sleep 2 + + $IP stats set dev dummy1 ${type}_stats on + local pkts=$(get_hwstat dummy1 l3 rx.packets) + ((pkts < 10)) + check_err $? "$type stats show >= 10 packets after post-fail enablement" + + $IP stats set dev dummy1 ${type}_stats off + + log_test "Counter values in $type stats" +} + +l3_counter_test() +{ + counter_test l3 +} + +rollback_test() +{ + local type=$1; shift + + RET=0 + + nsim_hwstats_enable 1 dummy1 l3 + nsim_hwstats_enable 2 dummy1 l3 + nsim_hwstats_enable 3 dummy1 l3 + + # The three netdevsim instances are registered in order of their number + # one after another. It is reasonable to expect that whatever + # notifications take place hit no. 2 in between hitting nos. 1 and 3, + # whatever the actual order. This allows us to test that a fail caused + # by no. 2 does not leave the system in a partial state, and rolls + # everything back. + + nsim_hwstats_fail_next_enable 2 dummy1 l3 + $IP stats set dev dummy1 ${type}_stats on 2>/dev/null + check_fail $? "$type stats request not bounced as it should have been" + + netdev_check_unused dummy1 $type + check_err $? "$type stats reported as used after bounce" + netdev_check_unrequested dummy1 $type + check_err $? "$type stats reported as requested after bounce" + + sleep 2 + + $IP stats set dev dummy1 ${type}_stats on + check_err $? "$type stats request not upheld as it should have been" + + local pkts=$(get_hwstat dummy1 l3 rx.packets) + ((pkts < 10)) + check_err $? "$type stats show $pkts packets after post-fail enablement" + + $IP stats set dev dummy1 ${type}_stats off + + nsim_hwstats_disable 3 dummy1 l3 + nsim_hwstats_disable 2 dummy1 l3 + nsim_hwstats_disable 1 dummy1 l3 + + log_test "Failure in $type stats enablement rolled back" +} + +l3_rollback_test() +{ + rollback_test l3 +} + +l3_monitor_test() +{ + hw_stats_monitor_test dummy1 l3 \ + "nsim_hwstats_enable 1 dummy1 l3" \ + "nsim_hwstats_disable 1 dummy1 l3" \ + "$IP" +} + +trap cleanup EXIT + +setup_prepare +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/netdevsim/macsec-offload.sh b/tools/testing/selftests/drivers/net/netdevsim/macsec-offload.sh new file mode 100755 index 000000000000..98033e6667d2 --- /dev/null +++ b/tools/testing/selftests/drivers/net/netdevsim/macsec-offload.sh @@ -0,0 +1,117 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0-only + +source ethtool-common.sh + +NSIM_NETDEV=$(make_netdev) +MACSEC_NETDEV=macsec_nsim + +set -o pipefail + +if ! ethtool -k $NSIM_NETDEV | grep -q 'macsec-hw-offload: on'; then + echo "SKIP: netdevsim doesn't support MACsec offload" + exit 4 +fi + +if ! ip link add link $NSIM_NETDEV $MACSEC_NETDEV type macsec offload mac 2>/dev/null; then + echo "SKIP: couldn't create macsec device" + exit 4 +fi +ip link del $MACSEC_NETDEV + +# +# test macsec offload API +# + +ip link add link $NSIM_NETDEV "${MACSEC_NETDEV}" type macsec port 4 offload mac +check $? + +ip link add link $NSIM_NETDEV "${MACSEC_NETDEV}2" type macsec address "aa:bb:cc:dd:ee:ff" port 5 offload mac +check $? + +ip link add link $NSIM_NETDEV "${MACSEC_NETDEV}3" type macsec sci abbacdde01020304 offload mac +check $? + +ip link add link $NSIM_NETDEV "${MACSEC_NETDEV}4" type macsec port 8 offload mac 2> /dev/null +check $? '' '' 1 + +ip macsec add "${MACSEC_NETDEV}" tx sa 0 pn 1024 on key 01 12345678901234567890123456789012 +check $? + +ip macsec add "${MACSEC_NETDEV}" rx port 1234 address "1c:ed:de:ad:be:ef" +check $? + +ip macsec add "${MACSEC_NETDEV}" rx port 1234 address "1c:ed:de:ad:be:ef" sa 0 pn 1 on \ + key 00 0123456789abcdef0123456789abcdef +check $? + +ip macsec add "${MACSEC_NETDEV}" rx port 1235 address "1c:ed:de:ad:be:ef" 2> /dev/null +check $? '' '' 1 + +# can't disable macsec offload when SAs are configured +ip link set "${MACSEC_NETDEV}" type macsec offload off 2> /dev/null +check $? '' '' 1 + +ip macsec offload "${MACSEC_NETDEV}" off 2> /dev/null +check $? '' '' 1 + +# toggle macsec offload via rtnetlink +ip link set "${MACSEC_NETDEV}2" type macsec offload off +check $? + +ip link set "${MACSEC_NETDEV}2" type macsec offload mac +check $? + +# toggle macsec offload via genetlink +ip macsec offload "${MACSEC_NETDEV}2" off +check $? + +ip macsec offload "${MACSEC_NETDEV}2" mac +check $? + +for dev in ${MACSEC_NETDEV}{,2,3} ; do + ip link del $dev + check $? +done + + +# +# test ethtool features when toggling offload +# + +ip link add link $NSIM_NETDEV $MACSEC_NETDEV type macsec offload mac +TMP_FEATS_ON_1="$(ethtool -k $MACSEC_NETDEV)" + +ip link set $MACSEC_NETDEV type macsec offload off +TMP_FEATS_OFF_1="$(ethtool -k $MACSEC_NETDEV)" + +ip link set $MACSEC_NETDEV type macsec offload mac +TMP_FEATS_ON_2="$(ethtool -k $MACSEC_NETDEV)" + +[ "$TMP_FEATS_ON_1" = "$TMP_FEATS_ON_2" ] +check $? + +ip link del $MACSEC_NETDEV + +ip link add link $NSIM_NETDEV $MACSEC_NETDEV type macsec +check $? + +TMP_FEATS_OFF_2="$(ethtool -k $MACSEC_NETDEV)" +[ "$TMP_FEATS_OFF_1" = "$TMP_FEATS_OFF_2" ] +check $? + +ip link set $MACSEC_NETDEV type macsec offload mac +check $? + +TMP_FEATS_ON_3="$(ethtool -k $MACSEC_NETDEV)" +[ "$TMP_FEATS_ON_1" = "$TMP_FEATS_ON_3" ] +check $? + + +if [ $num_errors -eq 0 ]; then + echo "PASSED all $((num_passes)) checks" + exit 0 +else + echo "FAILED $num_errors/$((num_errors+num_passes)) checks" + exit 1 +fi diff --git a/tools/testing/selftests/drivers/net/netdevsim/nexthop.sh b/tools/testing/selftests/drivers/net/netdevsim/nexthop.sh new file mode 100755 index 000000000000..e8e0dc088d6a --- /dev/null +++ b/tools/testing/selftests/drivers/net/netdevsim/nexthop.sh @@ -0,0 +1,1058 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# This test is for checking the nexthop offload API. It makes use of netdevsim +# which registers a listener to the nexthop notification chain. + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + nexthop_single_add_test + nexthop_single_add_err_test + nexthop_group_add_test + nexthop_group_add_err_test + nexthop_res_group_add_test + nexthop_res_group_add_err_test + nexthop_group_replace_test + nexthop_group_replace_err_test + nexthop_res_group_replace_test + nexthop_res_group_replace_err_test + nexthop_res_group_idle_timer_test + nexthop_res_group_idle_timer_del_test + nexthop_res_group_increase_idle_timer_test + nexthop_res_group_decrease_idle_timer_test + nexthop_res_group_unbalanced_timer_test + nexthop_res_group_unbalanced_timer_del_test + nexthop_res_group_no_unbalanced_timer_test + nexthop_res_group_short_unbalanced_timer_test + nexthop_res_group_increase_unbalanced_timer_test + nexthop_res_group_decrease_unbalanced_timer_test + nexthop_res_group_force_migrate_busy_test + nexthop_single_replace_test + nexthop_single_replace_err_test + nexthop_single_in_group_replace_test + nexthop_single_in_group_replace_err_test + nexthop_single_in_res_group_replace_test + nexthop_single_in_res_group_replace_err_test + nexthop_single_in_group_delete_test + nexthop_single_in_group_delete_err_test + nexthop_single_in_res_group_delete_test + nexthop_single_in_res_group_delete_err_test + nexthop_replay_test + nexthop_replay_err_test +" +NETDEVSIM_PATH=/sys/bus/netdevsim/ +DEV_ADDR=1337 +DEV=netdevsim${DEV_ADDR} +SYSFS_NET_DIR=/sys/bus/netdevsim/devices/$DEV/net/ +DEBUGFS_NET_DIR=/sys/kernel/debug/netdevsim/$DEV/ +NUM_NETIFS=0 +source $lib_dir/lib.sh + +DEVLINK_DEV= +source $lib_dir/devlink_lib.sh +DEVLINK_DEV=netdevsim/${DEV} + +nexthop_check() +{ + local nharg="$1"; shift + local expected="$1"; shift + + out=$($IP nexthop show ${nharg} | sed -e 's/ *$//') + if [[ "$out" != "$expected" ]]; then + return 1 + fi + + return 0 +} + +nexthop_bucket_nhid_count_check() +{ + local group_id=$1; shift + local expected + local count + local nhid + local ret + + while (($# > 0)); do + nhid=$1; shift + expected=$1; shift + + count=$($IP nexthop bucket show id $group_id nhid $nhid | + grep "trap" | wc -l) + if ((expected != count)); then + return 1 + fi + done + + return 0 +} + +nexthop_resource_check() +{ + local expected_occ=$1; shift + + occ=$($DEVLINK -jp resource show $DEVLINK_DEV \ + | jq '.[][][] | select(.name=="nexthops") | .["occ"]') + + if [ $expected_occ -ne $occ ]; then + return 1 + fi + + return 0 +} + +nexthop_resource_set() +{ + local size=$1; shift + + $DEVLINK resource set $DEVLINK_DEV path nexthops size $size + $DEVLINK dev reload $DEVLINK_DEV +} + +nexthop_single_add_test() +{ + RET=0 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + nexthop_check "id 1" "id 1 via 192.0.2.2 dev dummy1 scope link trap" + check_err $? "Unexpected nexthop entry" + + nexthop_resource_check 1 + check_err $? "Wrong nexthop occupancy" + + $IP nexthop del id 1 + nexthop_resource_check 0 + check_err $? "Wrong nexthop occupancy after delete" + + log_test "Single nexthop add and delete" +} + +nexthop_single_add_err_test() +{ + RET=0 + + nexthop_resource_set 1 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 &> /dev/null + check_fail $? "Nexthop addition succeeded when should fail" + + nexthop_resource_check 1 + check_err $? "Wrong nexthop occupancy" + + log_test "Single nexthop add failure" + + $IP nexthop flush &> /dev/null + nexthop_resource_set 9999 +} + +nexthop_group_add_test() +{ + RET=0 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + + $IP nexthop add id 10 group 1/2 + nexthop_check "id 10" "id 10 group 1/2 trap" + check_err $? "Unexpected nexthop group entry" + + nexthop_resource_check 4 + check_err $? "Wrong nexthop occupancy" + + $IP nexthop del id 10 + nexthop_resource_check 2 + check_err $? "Wrong nexthop occupancy after delete" + + $IP nexthop add id 10 group 1,20/2,39 + nexthop_check "id 10" "id 10 group 1,20/2,39 trap" + check_err $? "Unexpected weighted nexthop group entry" + + nexthop_resource_check 61 + check_err $? "Wrong weighted nexthop occupancy" + + $IP nexthop del id 10 + nexthop_resource_check 2 + check_err $? "Wrong nexthop occupancy after delete" + + log_test "Nexthop group add and delete" + + $IP nexthop flush &> /dev/null +} + +nexthop_group_add_err_test() +{ + RET=0 + + nexthop_resource_set 2 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + + $IP nexthop add id 10 group 1/2 &> /dev/null + check_fail $? "Nexthop group addition succeeded when should fail" + + nexthop_resource_check 2 + check_err $? "Wrong nexthop occupancy" + + log_test "Nexthop group add failure" + + $IP nexthop flush &> /dev/null + nexthop_resource_set 9999 +} + +nexthop_res_group_add_test() +{ + RET=0 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + + $IP nexthop add id 10 group 1/2 type resilient buckets 4 + nexthop_check "id 10" "id 10 group 1/2 type resilient buckets 4 idle_timer 120 unbalanced_timer 0 unbalanced_time 0 trap" + check_err $? "Unexpected nexthop group entry" + + nexthop_bucket_nhid_count_check 10 1 2 + check_err $? "Wrong nexthop buckets count" + nexthop_bucket_nhid_count_check 10 2 2 + check_err $? "Wrong nexthop buckets count" + + nexthop_resource_check 6 + check_err $? "Wrong nexthop occupancy" + + $IP nexthop del id 10 + nexthop_resource_check 2 + check_err $? "Wrong nexthop occupancy after delete" + + $IP nexthop add id 10 group 1,3/2,2 type resilient buckets 5 + nexthop_check "id 10" "id 10 group 1,3/2,2 type resilient buckets 5 idle_timer 120 unbalanced_timer 0 unbalanced_time 0 trap" + check_err $? "Unexpected weighted nexthop group entry" + + nexthop_bucket_nhid_count_check 10 1 3 + check_err $? "Wrong nexthop buckets count" + nexthop_bucket_nhid_count_check 10 2 2 + check_err $? "Wrong nexthop buckets count" + + nexthop_resource_check 7 + check_err $? "Wrong weighted nexthop occupancy" + + $IP nexthop del id 10 + nexthop_resource_check 2 + check_err $? "Wrong nexthop occupancy after delete" + + log_test "Resilient nexthop group add and delete" + + $IP nexthop flush &> /dev/null +} + +nexthop_res_group_add_err_test() +{ + RET=0 + + nexthop_resource_set 2 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + + $IP nexthop add id 10 group 1/2 type resilient buckets 4 &> /dev/null + check_fail $? "Nexthop group addition succeeded when should fail" + + nexthop_resource_check 2 + check_err $? "Wrong nexthop occupancy" + + log_test "Resilient nexthop group add failure" + + $IP nexthop flush &> /dev/null + nexthop_resource_set 9999 +} + +nexthop_group_replace_test() +{ + RET=0 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 3 via 192.0.2.4 dev dummy1 + $IP nexthop add id 10 group 1/2 + + $IP nexthop replace id 10 group 1/2/3 + nexthop_check "id 10" "id 10 group 1/2/3 trap" + check_err $? "Unexpected nexthop group entry" + + nexthop_resource_check 6 + check_err $? "Wrong nexthop occupancy" + + log_test "Nexthop group replace" + + $IP nexthop flush &> /dev/null +} + +nexthop_group_replace_err_test() +{ + RET=0 + + nexthop_resource_set 5 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 3 via 192.0.2.4 dev dummy1 + $IP nexthop add id 10 group 1/2 + + $IP nexthop replace id 10 group 1/2/3 &> /dev/null + check_fail $? "Nexthop group replacement succeeded when should fail" + + nexthop_check "id 10" "id 10 group 1/2 trap" + check_err $? "Unexpected nexthop group entry after failure" + + nexthop_resource_check 5 + check_err $? "Wrong nexthop occupancy after failure" + + log_test "Nexthop group replace failure" + + $IP nexthop flush &> /dev/null + nexthop_resource_set 9999 +} + +nexthop_res_group_replace_test() +{ + RET=0 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 3 via 192.0.2.4 dev dummy1 + $IP nexthop add id 10 group 1/2 type resilient buckets 6 + + $IP nexthop replace id 10 group 1/2/3 type resilient + nexthop_check "id 10" "id 10 group 1/2/3 type resilient buckets 6 idle_timer 120 unbalanced_timer 0 unbalanced_time 0 trap" + check_err $? "Unexpected nexthop group entry" + + nexthop_bucket_nhid_count_check 10 1 2 + check_err $? "Wrong nexthop buckets count" + nexthop_bucket_nhid_count_check 10 2 2 + check_err $? "Wrong nexthop buckets count" + nexthop_bucket_nhid_count_check 10 3 2 + check_err $? "Wrong nexthop buckets count" + + nexthop_resource_check 9 + check_err $? "Wrong nexthop occupancy" + + log_test "Resilient nexthop group replace" + + $IP nexthop flush &> /dev/null +} + +nexthop_res_group_replace_err_test() +{ + RET=0 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 3 via 192.0.2.4 dev dummy1 + $IP nexthop add id 10 group 1/2 type resilient buckets 6 + + ip netns exec testns1 \ + echo 1 > $DEBUGFS_NET_DIR/fib/fail_res_nexthop_group_replace + $IP nexthop replace id 10 group 1/2/3 type resilient &> /dev/null + check_fail $? "Nexthop group replacement succeeded when should fail" + + nexthop_check "id 10" "id 10 group 1/2 type resilient buckets 6 idle_timer 120 unbalanced_timer 0 unbalanced_time 0 trap" + check_err $? "Unexpected nexthop group entry after failure" + + nexthop_bucket_nhid_count_check 10 1 3 + check_err $? "Wrong nexthop buckets count" + nexthop_bucket_nhid_count_check 10 2 3 + check_err $? "Wrong nexthop buckets count" + + nexthop_resource_check 9 + check_err $? "Wrong nexthop occupancy after failure" + + log_test "Resilient nexthop group replace failure" + + $IP nexthop flush &> /dev/null + ip netns exec testns1 \ + echo 0 > $DEBUGFS_NET_DIR/fib/fail_res_nexthop_group_replace +} + +nexthop_res_mark_buckets_busy() +{ + local group_id=$1; shift + local nhid=$1; shift + local count=$1; shift + local index + + for index in $($IP -j nexthop bucket show id $group_id nhid $nhid | + jq '.[].bucket.index' | head -n ${count:--0}) + do + echo $group_id $index \ + > $DEBUGFS_NET_DIR/fib/nexthop_bucket_activity + done +} + +nexthop_res_num_nhid_buckets() +{ + local group_id=$1; shift + local nhid=$1; shift + + $IP -j nexthop bucket show id $group_id nhid $nhid | jq length +} + +nexthop_res_group_idle_timer_test() +{ + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + + RET=0 + + $IP nexthop add id 10 group 1/2 type resilient buckets 8 idle_timer 4 + nexthop_res_mark_buckets_busy 10 1 + $IP nexthop replace id 10 group 1/2,3 type resilient + + nexthop_bucket_nhid_count_check 10 1 4 2 4 + check_err $? "Group expected to be unbalanced" + + sleep 6 + + nexthop_bucket_nhid_count_check 10 1 2 2 6 + check_err $? "Group expected to be balanced" + + log_test "Bucket migration after idle timer" + + $IP nexthop flush &> /dev/null +} + +nexthop_res_group_idle_timer_del_test() +{ + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 3 via 192.0.2.3 dev dummy1 + + RET=0 + + $IP nexthop add id 10 group 1,50/2,50/3,1 \ + type resilient buckets 8 idle_timer 6 + nexthop_res_mark_buckets_busy 10 1 + $IP nexthop replace id 10 group 1,50/2,150/3,1 type resilient + + nexthop_bucket_nhid_count_check 10 1 4 2 4 3 0 + check_err $? "Group expected to be unbalanced" + + sleep 4 + + # Deletion prompts group replacement. Check that the bucket timers + # are kept. + $IP nexthop delete id 3 + + nexthop_bucket_nhid_count_check 10 1 4 2 4 + check_err $? "Group expected to still be unbalanced" + + sleep 4 + + nexthop_bucket_nhid_count_check 10 1 2 2 6 + check_err $? "Group expected to be balanced" + + log_test "Bucket migration after idle timer (with delete)" + + $IP nexthop flush &> /dev/null +} + +__nexthop_res_group_increase_timer_test() +{ + local timer=$1; shift + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + + RET=0 + + $IP nexthop add id 10 group 1/2 type resilient buckets 8 $timer 4 + nexthop_res_mark_buckets_busy 10 1 + $IP nexthop replace id 10 group 1/2,3 type resilient + + nexthop_bucket_nhid_count_check 10 2 6 + check_fail $? "Group expected to be unbalanced" + + sleep 2 + $IP nexthop replace id 10 group 1/2,3 type resilient $timer 8 + sleep 4 + + # 6 seconds, past the original timer. + nexthop_bucket_nhid_count_check 10 2 6 + check_fail $? "Group still expected to be unbalanced" + + sleep 4 + + # 10 seconds, past the new timer. + nexthop_bucket_nhid_count_check 10 2 6 + check_err $? "Group expected to be balanced" + + log_test "Bucket migration after $timer increase" + + $IP nexthop flush &> /dev/null +} + +__nexthop_res_group_decrease_timer_test() +{ + local timer=$1; shift + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + + RET=0 + + $IP nexthop add id 10 group 1/2 type resilient buckets 8 $timer 8 + nexthop_res_mark_buckets_busy 10 1 + $IP nexthop replace id 10 group 1/2,3 type resilient + + nexthop_bucket_nhid_count_check 10 2 6 + check_fail $? "Group expected to be unbalanced" + + sleep 2 + $IP nexthop replace id 10 group 1/2,3 type resilient $timer 4 + sleep 4 + + # 6 seconds, past the new timer, before the old timer. + nexthop_bucket_nhid_count_check 10 2 6 + check_err $? "Group expected to be balanced" + + log_test "Bucket migration after $timer decrease" + + $IP nexthop flush &> /dev/null +} + +__nexthop_res_group_increase_timer_del_test() +{ + local timer=$1; shift + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 3 via 192.0.2.3 dev dummy1 + + RET=0 + + $IP nexthop add id 10 group 1,100/2,100/3,1 \ + type resilient buckets 8 $timer 4 + nexthop_res_mark_buckets_busy 10 1 + $IP nexthop replace id 10 group 1,100/2,300/3,1 type resilient + + nexthop_bucket_nhid_count_check 10 2 6 + check_fail $? "Group expected to be unbalanced" + + sleep 2 + $IP nexthop replace id 10 group 1/2,3 type resilient $timer 8 + sleep 4 + + # 6 seconds, past the original timer. + nexthop_bucket_nhid_count_check 10 2 6 + check_fail $? "Group still expected to be unbalanced" + + sleep 4 + + # 10 seconds, past the new timer. + nexthop_bucket_nhid_count_check 10 2 6 + check_err $? "Group expected to be balanced" + + log_test "Bucket migration after $timer increase" + + $IP nexthop flush &> /dev/null +} + +nexthop_res_group_increase_idle_timer_test() +{ + __nexthop_res_group_increase_timer_test idle_timer +} + +nexthop_res_group_decrease_idle_timer_test() +{ + __nexthop_res_group_decrease_timer_test idle_timer +} + +nexthop_res_group_unbalanced_timer_test() +{ + local i + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + + RET=0 + + $IP nexthop add id 10 group 1/2 type resilient \ + buckets 8 idle_timer 6 unbalanced_timer 10 + nexthop_res_mark_buckets_busy 10 1 + $IP nexthop replace id 10 group 1/2,3 type resilient + + for i in 1 2; do + sleep 4 + nexthop_bucket_nhid_count_check 10 1 4 2 4 + check_err $? "$i: Group expected to be unbalanced" + nexthop_res_mark_buckets_busy 10 1 + done + + # 3 x sleep 4 > unbalanced timer 10 + sleep 4 + nexthop_bucket_nhid_count_check 10 1 2 2 6 + check_err $? "Group expected to be balanced" + + log_test "Bucket migration after unbalanced timer" + + $IP nexthop flush &> /dev/null +} + +nexthop_res_group_unbalanced_timer_del_test() +{ + local i + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 3 via 192.0.2.3 dev dummy1 + + RET=0 + + $IP nexthop add id 10 group 1,50/2,50/3,1 type resilient \ + buckets 8 idle_timer 6 unbalanced_timer 10 + nexthop_res_mark_buckets_busy 10 1 + $IP nexthop replace id 10 group 1,50/2,150/3,1 type resilient + + # Check that NH delete does not reset unbalanced time. + sleep 4 + $IP nexthop delete id 3 + nexthop_bucket_nhid_count_check 10 1 4 2 4 + check_err $? "1: Group expected to be unbalanced" + nexthop_res_mark_buckets_busy 10 1 + + sleep 4 + nexthop_bucket_nhid_count_check 10 1 4 2 4 + check_err $? "2: Group expected to be unbalanced" + nexthop_res_mark_buckets_busy 10 1 + + # 3 x sleep 4 > unbalanced timer 10 + sleep 4 + nexthop_bucket_nhid_count_check 10 1 2 2 6 + check_err $? "Group expected to be balanced" + + log_test "Bucket migration after unbalanced timer (with delete)" + + $IP nexthop flush &> /dev/null +} + +nexthop_res_group_no_unbalanced_timer_test() +{ + local i + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + + RET=0 + + $IP nexthop add id 10 group 1/2 type resilient buckets 8 + nexthop_res_mark_buckets_busy 10 1 + $IP nexthop replace id 10 group 1/2,3 type resilient + + for i in $(seq 3); do + sleep 60 + nexthop_bucket_nhid_count_check 10 2 6 + check_fail $? "$i: Group expected to be unbalanced" + nexthop_res_mark_buckets_busy 10 1 + done + + log_test "Buckets never force-migrated without unbalanced timer" + + $IP nexthop flush &> /dev/null +} + +nexthop_res_group_short_unbalanced_timer_test() +{ + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + + RET=0 + + $IP nexthop add id 10 group 1/2 type resilient \ + buckets 8 idle_timer 120 unbalanced_timer 4 + nexthop_res_mark_buckets_busy 10 1 + $IP nexthop replace id 10 group 1/2,3 type resilient + + nexthop_bucket_nhid_count_check 10 2 6 + check_fail $? "Group expected to be unbalanced" + + sleep 5 + + nexthop_bucket_nhid_count_check 10 2 6 + check_err $? "Group expected to be balanced" + + log_test "Bucket migration after unbalanced < idle timer" + + $IP nexthop flush &> /dev/null +} + +nexthop_res_group_increase_unbalanced_timer_test() +{ + __nexthop_res_group_increase_timer_test unbalanced_timer +} + +nexthop_res_group_decrease_unbalanced_timer_test() +{ + __nexthop_res_group_decrease_timer_test unbalanced_timer +} + +nexthop_res_group_force_migrate_busy_test() +{ + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + + RET=0 + + $IP nexthop add id 10 group 1/2 type resilient \ + buckets 8 idle_timer 120 + nexthop_res_mark_buckets_busy 10 1 + $IP nexthop replace id 10 group 1/2,3 type resilient + + nexthop_bucket_nhid_count_check 10 2 6 + check_fail $? "Group expected to be unbalanced" + + $IP nexthop replace id 10 group 2 type resilient + nexthop_bucket_nhid_count_check 10 2 8 + check_err $? "All buckets expected to have migrated" + + log_test "Busy buckets force-migrated when NH removed" + + $IP nexthop flush &> /dev/null +} + +nexthop_single_replace_test() +{ + RET=0 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + + $IP nexthop replace id 1 via 192.0.2.3 dev dummy1 + nexthop_check "id 1" "id 1 via 192.0.2.3 dev dummy1 scope link trap" + check_err $? "Unexpected nexthop entry" + + nexthop_resource_check 1 + check_err $? "Wrong nexthop occupancy" + + log_test "Single nexthop replace" + + $IP nexthop flush &> /dev/null +} + +nexthop_single_replace_err_test() +{ + RET=0 + + # This is supposed to cause the replace to fail because the new nexthop + # is programmed before deleting the replaced one. + nexthop_resource_set 1 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + + $IP nexthop replace id 1 via 192.0.2.3 dev dummy1 &> /dev/null + check_fail $? "Nexthop replace succeeded when should fail" + + nexthop_check "id 1" "id 1 via 192.0.2.2 dev dummy1 scope link trap" + check_err $? "Unexpected nexthop entry after failure" + + nexthop_resource_check 1 + check_err $? "Wrong nexthop occupancy after failure" + + log_test "Single nexthop replace failure" + + $IP nexthop flush &> /dev/null + nexthop_resource_set 9999 +} + +nexthop_single_in_group_replace_test() +{ + RET=0 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 10 group 1/2 + + $IP nexthop replace id 1 via 192.0.2.4 dev dummy1 + check_err $? "Failed to replace nexthop when should not" + + nexthop_check "id 10" "id 10 group 1/2 trap" + check_err $? "Unexpected nexthop group entry" + + nexthop_resource_check 4 + check_err $? "Wrong nexthop occupancy" + + log_test "Single nexthop replace while in group" + + $IP nexthop flush &> /dev/null +} + +nexthop_single_in_group_replace_err_test() +{ + RET=0 + + nexthop_resource_set 5 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 10 group 1/2 + + $IP nexthop replace id 1 via 192.0.2.4 dev dummy1 &> /dev/null + check_fail $? "Nexthop replacement succeeded when should fail" + + nexthop_check "id 1" "id 1 via 192.0.2.2 dev dummy1 scope link trap" + check_err $? "Unexpected nexthop entry after failure" + + nexthop_check "id 10" "id 10 group 1/2 trap" + check_err $? "Unexpected nexthop group entry after failure" + + nexthop_resource_check 4 + check_err $? "Wrong nexthop occupancy" + + log_test "Single nexthop replace while in group failure" + + $IP nexthop flush &> /dev/null + nexthop_resource_set 9999 +} + +nexthop_single_in_res_group_replace_test() +{ + RET=0 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 10 group 1/2 type resilient buckets 4 + + $IP nexthop replace id 1 via 192.0.2.4 dev dummy1 + check_err $? "Failed to replace nexthop when should not" + + nexthop_check "id 10" "id 10 group 1/2 type resilient buckets 4 idle_timer 120 unbalanced_timer 0 unbalanced_time 0 trap" + check_err $? "Unexpected nexthop group entry" + + nexthop_bucket_nhid_count_check 10 1 2 2 2 + check_err $? "Wrong nexthop buckets count" + + nexthop_resource_check 6 + check_err $? "Wrong nexthop occupancy" + + log_test "Single nexthop replace while in resilient group" + + $IP nexthop flush &> /dev/null +} + +nexthop_single_in_res_group_replace_err_test() +{ + RET=0 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 10 group 1/2 type resilient buckets 4 + + ip netns exec testns1 \ + echo 1 > $DEBUGFS_NET_DIR/fib/fail_nexthop_bucket_replace + $IP nexthop replace id 1 via 192.0.2.4 dev dummy1 &> /dev/null + check_fail $? "Nexthop replacement succeeded when should fail" + + nexthop_check "id 1" "id 1 via 192.0.2.2 dev dummy1 scope link trap" + check_err $? "Unexpected nexthop entry after failure" + + nexthop_check "id 10" "id 10 group 1/2 type resilient buckets 4 idle_timer 120 unbalanced_timer 0 unbalanced_time 0 trap" + check_err $? "Unexpected nexthop group entry after failure" + + nexthop_bucket_nhid_count_check 10 1 2 2 2 + check_err $? "Wrong nexthop buckets count" + + nexthop_resource_check 6 + check_err $? "Wrong nexthop occupancy" + + log_test "Single nexthop replace while in resilient group failure" + + $IP nexthop flush &> /dev/null + ip netns exec testns1 \ + echo 0 > $DEBUGFS_NET_DIR/fib/fail_nexthop_bucket_replace +} + +nexthop_single_in_group_delete_test() +{ + RET=0 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 10 group 1/2 + + $IP nexthop del id 1 + nexthop_check "id 10" "id 10 group 2 trap" + check_err $? "Unexpected nexthop group entry" + + nexthop_resource_check 2 + check_err $? "Wrong nexthop occupancy" + + log_test "Single nexthop delete while in group" + + $IP nexthop flush &> /dev/null +} + +nexthop_single_in_group_delete_err_test() +{ + RET=0 + + # First, nexthop 1 will be deleted, which will reduce the occupancy to + # 5. Afterwards, a replace notification will be sent for nexthop group + # 10 with only two nexthops. Since the new group is allocated before + # the old is deleted, the replacement will fail as it will result in an + # occupancy of 7. + nexthop_resource_set 6 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 3 via 192.0.2.4 dev dummy1 + $IP nexthop add id 10 group 1/2/3 + + $IP nexthop del id 1 + + nexthop_resource_check 5 + check_err $? "Wrong nexthop occupancy" + + log_test "Single nexthop delete while in group failure" + + $IP nexthop flush &> /dev/null + nexthop_resource_set 9999 +} + +nexthop_single_in_res_group_delete_test() +{ + RET=0 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 10 group 1/2 type resilient buckets 4 + + $IP nexthop del id 1 + nexthop_check "id 10" "id 10 group 2 type resilient buckets 4 idle_timer 120 unbalanced_timer 0 unbalanced_time 0 trap" + check_err $? "Unexpected nexthop group entry" + + nexthop_bucket_nhid_count_check 10 2 4 + check_err $? "Wrong nexthop buckets count" + + nexthop_resource_check 5 + check_err $? "Wrong nexthop occupancy" + + log_test "Single nexthop delete while in resilient group" + + $IP nexthop flush &> /dev/null +} + +nexthop_single_in_res_group_delete_err_test() +{ + RET=0 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 3 via 192.0.2.4 dev dummy1 + $IP nexthop add id 10 group 1/2/3 type resilient buckets 6 + + ip netns exec testns1 \ + echo 1 > $DEBUGFS_NET_DIR/fib/fail_nexthop_bucket_replace + $IP nexthop del id 1 + + # We failed to replace the two nexthop buckets that were originally + # assigned to nhid 1. + nexthop_bucket_nhid_count_check 10 2 2 3 2 + check_err $? "Wrong nexthop buckets count" + + nexthop_resource_check 8 + check_err $? "Wrong nexthop occupancy" + + log_test "Single nexthop delete while in resilient group failure" + + $IP nexthop flush &> /dev/null + ip netns exec testns1 \ + echo 0 > $DEBUGFS_NET_DIR/fib/fail_nexthop_bucket_replace +} + +nexthop_replay_test() +{ + RET=0 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 10 group 1/2 + + $DEVLINK dev reload $DEVLINK_DEV + check_err $? "Failed to reload when should not" + + nexthop_check "id 1" "id 1 via 192.0.2.2 dev dummy1 scope link trap" + check_err $? "Unexpected nexthop entry after reload" + + nexthop_check "id 2" "id 2 via 192.0.2.3 dev dummy1 scope link trap" + check_err $? "Unexpected nexthop entry after reload" + + nexthop_check "id 10" "id 10 group 1/2 trap" + check_err $? "Unexpected nexthop group entry after reload" + + nexthop_resource_check 4 + check_err $? "Wrong nexthop occupancy" + + log_test "Nexthop replay" + + $IP nexthop flush &> /dev/null +} + +nexthop_replay_err_test() +{ + RET=0 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 10 group 1/2 + + # Reduce size of nexthop resource so that reload will fail. + $DEVLINK resource set $DEVLINK_DEV path nexthops size 3 + $DEVLINK dev reload $DEVLINK_DEV &> /dev/null + check_fail $? "Reload succeeded when should fail" + + $DEVLINK resource set $DEVLINK_DEV path nexthops size 9999 + $DEVLINK dev reload $DEVLINK_DEV + check_err $? "Failed to reload when should not" + + log_test "Nexthop replay failure" + + $IP nexthop flush &> /dev/null +} + +setup_prepare() +{ + local netdev + + modprobe netdevsim &> /dev/null + + echo "$DEV_ADDR 1" > ${NETDEVSIM_PATH}/new_device + while [ ! -d $SYSFS_NET_DIR ] ; do :; done + + set -e + + ip netns add testns1 + devlink dev reload $DEVLINK_DEV netns testns1 + + IP="ip -netns testns1" + DEVLINK="devlink -N testns1" + + $IP link add name dummy1 up type dummy + $IP address add 192.0.2.1/24 dev dummy1 + + set +e +} + +cleanup() +{ + pre_cleanup + ip netns del testns1 + echo "$DEV_ADDR" > ${NETDEVSIM_PATH}/del_device + modprobe -r netdevsim &> /dev/null +} + +trap cleanup EXIT + +setup_prepare + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/netdevsim/peer.sh b/tools/testing/selftests/drivers/net/netdevsim/peer.sh new file mode 100755 index 000000000000..7f32b5600925 --- /dev/null +++ b/tools/testing/selftests/drivers/net/netdevsim/peer.sh @@ -0,0 +1,144 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0-only + +lib_dir=$(dirname $0)/../../../net +source $lib_dir/lib.sh + +NSIM_DEV_1_ID=$((256 + RANDOM % 256)) +NSIM_DEV_1_SYS=/sys/bus/netdevsim/devices/netdevsim$NSIM_DEV_1_ID +NSIM_DEV_2_ID=$((512 + RANDOM % 256)) +NSIM_DEV_2_SYS=/sys/bus/netdevsim/devices/netdevsim$NSIM_DEV_2_ID + +NSIM_DEV_SYS_NEW=/sys/bus/netdevsim/new_device +NSIM_DEV_SYS_DEL=/sys/bus/netdevsim/del_device +NSIM_DEV_SYS_LINK=/sys/bus/netdevsim/link_device +NSIM_DEV_SYS_UNLINK=/sys/bus/netdevsim/unlink_device + +socat_check() +{ + if [ ! -x "$(command -v socat)" ]; then + echo "socat command not found. Skipping test" + return 1 + fi + + return 0 +} + +setup_ns() +{ + set -e + ip netns add nssv + ip netns add nscl + + NSIM_DEV_1_NAME=$(find $NSIM_DEV_1_SYS/net -maxdepth 1 -type d ! \ + -path $NSIM_DEV_1_SYS/net -exec basename {} \;) + NSIM_DEV_2_NAME=$(find $NSIM_DEV_2_SYS/net -maxdepth 1 -type d ! \ + -path $NSIM_DEV_2_SYS/net -exec basename {} \;) + + ip link set $NSIM_DEV_1_NAME netns nssv + ip link set $NSIM_DEV_2_NAME netns nscl + + ip netns exec nssv ip addr add '192.168.1.1/24' dev $NSIM_DEV_1_NAME + ip netns exec nscl ip addr add '192.168.1.2/24' dev $NSIM_DEV_2_NAME + + ip netns exec nssv ip link set dev $NSIM_DEV_1_NAME up + ip netns exec nscl ip link set dev $NSIM_DEV_2_NAME up + set +e +} + +cleanup_ns() +{ + ip netns del nscl + ip netns del nssv +} + +### +### Code start +### + +socat_check || exit 4 + +modprobe netdevsim + +# linking + +echo $NSIM_DEV_1_ID > $NSIM_DEV_SYS_NEW +echo $NSIM_DEV_2_ID > $NSIM_DEV_SYS_NEW +udevadm settle + +setup_ns + +NSIM_DEV_1_FD=$((256 + RANDOM % 256)) +exec {NSIM_DEV_1_FD}</var/run/netns/nssv +NSIM_DEV_1_IFIDX=$(ip netns exec nssv cat /sys/class/net/$NSIM_DEV_1_NAME/ifindex) + +NSIM_DEV_2_FD=$((256 + RANDOM % 256)) +exec {NSIM_DEV_2_FD}</var/run/netns/nscl +NSIM_DEV_2_IFIDX=$(ip netns exec nscl cat /sys/class/net/$NSIM_DEV_2_NAME/ifindex) + +echo "$NSIM_DEV_1_FD:$NSIM_DEV_1_IFIDX $NSIM_DEV_2_FD:2000" > $NSIM_DEV_SYS_LINK 2>/dev/null +if [ $? -eq 0 ]; then + echo "linking with non-existent netdevsim should fail" + cleanup_ns + exit 1 +fi + +echo "$NSIM_DEV_1_FD:$NSIM_DEV_1_IFIDX 2000:$NSIM_DEV_2_IFIDX" > $NSIM_DEV_SYS_LINK 2>/dev/null +if [ $? -eq 0 ]; then + echo "linking with non-existent netnsid should fail" + cleanup_ns + exit 1 +fi + +echo "$NSIM_DEV_1_FD:$NSIM_DEV_1_IFIDX $NSIM_DEV_1_FD:$NSIM_DEV_1_IFIDX" > $NSIM_DEV_SYS_LINK 2>/dev/null +if [ $? -eq 0 ]; then + echo "linking with self should fail" + cleanup_ns + exit 1 +fi + +echo "$NSIM_DEV_1_FD:$NSIM_DEV_1_IFIDX $NSIM_DEV_2_FD:$NSIM_DEV_2_IFIDX" > $NSIM_DEV_SYS_LINK +if [ $? -ne 0 ]; then + echo "linking netdevsim1 with netdevsim2 should succeed" + cleanup_ns + exit 1 +fi + +# argument error checking + +echo "$NSIM_DEV_1_FD:$NSIM_DEV_1_IFIDX $NSIM_DEV_2_FD:a" > $NSIM_DEV_SYS_LINK 2>/dev/null +if [ $? -eq 0 ]; then + echo "invalid arg should fail" + cleanup_ns + exit 1 +fi + +# send/recv packets + +tmp_file=$(mktemp) +ip netns exec nssv socat TCP-LISTEN:1234,fork $tmp_file & +pid=$! +res=0 + +wait_local_port_listen nssv 1234 tcp + +echo "HI" | ip netns exec nscl socat STDIN TCP:192.168.1.1:1234 + +count=$(cat $tmp_file | wc -c) +if [[ $count -ne 3 ]]; then + echo "expected 3 bytes, got $count" + res=1 +fi + +echo "$NSIM_DEV_1_FD:$NSIM_DEV_1_IFIDX" > $NSIM_DEV_SYS_UNLINK + +echo $NSIM_DEV_2_ID > $NSIM_DEV_SYS_DEL + +kill $pid +echo $NSIM_DEV_1_ID > $NSIM_DEV_SYS_DEL + +cleanup_ns + +modprobe -r netdevsim + +exit $res diff --git a/tools/testing/selftests/drivers/net/netdevsim/psample.sh b/tools/testing/selftests/drivers/net/netdevsim/psample.sh new file mode 100755 index 000000000000..e689ff7a0b12 --- /dev/null +++ b/tools/testing/selftests/drivers/net/netdevsim/psample.sh @@ -0,0 +1,183 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# This test is for checking the psample module. It makes use of netdevsim +# which periodically generates "sampled" packets. + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + psample_enable_test + psample_group_num_test + psample_md_test +" +NETDEVSIM_PATH=/sys/bus/netdevsim/ +DEV_ADDR=1337 +DEV=netdevsim${DEV_ADDR} +SYSFS_NET_DIR=/sys/bus/netdevsim/devices/$DEV/net/ +PSAMPLE_DIR=/sys/kernel/debug/netdevsim/$DEV/psample/ +CAPTURE_FILE=$(mktemp) +NUM_NETIFS=0 +source $lib_dir/lib.sh + +DEVLINK_DEV= +source $lib_dir/devlink_lib.sh +DEVLINK_DEV=netdevsim/${DEV} + +# Available at https://github.com/Mellanox/libpsample +require_command psample + +psample_capture() +{ + rm -f $CAPTURE_FILE + + timeout 2 ip netns exec testns1 psample &> $CAPTURE_FILE +} + +psample_enable_test() +{ + RET=0 + + echo 1 > $PSAMPLE_DIR/enable + check_err $? "Failed to enable sampling when should not" + + echo 1 > $PSAMPLE_DIR/enable 2>/dev/null + check_fail $? "Sampling enablement succeeded when should fail" + + psample_capture + if [ $(cat $CAPTURE_FILE | wc -l) -eq 0 ]; then + check_err 1 "Failed to capture sampled packets" + fi + + echo 0 > $PSAMPLE_DIR/enable + check_err $? "Failed to disable sampling when should not" + + echo 0 > $PSAMPLE_DIR/enable 2>/dev/null + check_fail $? "Sampling disablement succeeded when should fail" + + psample_capture + if [ $(cat $CAPTURE_FILE | wc -l) -ne 0 ]; then + check_err 1 "Captured sampled packets when should not" + fi + + log_test "psample enable / disable" +} + +psample_group_num_test() +{ + RET=0 + + echo 1234 > $PSAMPLE_DIR/group_num + echo 1 > $PSAMPLE_DIR/enable + + psample_capture + grep -q -e "group 1234" $CAPTURE_FILE + check_err $? "Sampled packets reported with wrong group number" + + # New group number should only be used after disable / enable. + echo 4321 > $PSAMPLE_DIR/group_num + + psample_capture + grep -q -e "group 4321" $CAPTURE_FILE + check_fail $? "Group number changed while sampling is active" + + echo 0 > $PSAMPLE_DIR/enable && echo 1 > $PSAMPLE_DIR/enable + + psample_capture + grep -q -e "group 4321" $CAPTURE_FILE + check_err $? "Group number did not change after restarting sampling" + + log_test "psample group number" + + echo 0 > $PSAMPLE_DIR/enable +} + +psample_md_test() +{ + RET=0 + + echo 1 > $PSAMPLE_DIR/enable + + echo 1234 > $PSAMPLE_DIR/in_ifindex + echo 4321 > $PSAMPLE_DIR/out_ifindex + psample_capture + + grep -q -e "in-ifindex 1234" $CAPTURE_FILE + check_err $? "Sampled packets reported with wrong in-ifindex" + + grep -q -e "out-ifindex 4321" $CAPTURE_FILE + check_err $? "Sampled packets reported with wrong out-ifindex" + + echo 5 > $PSAMPLE_DIR/out_tc + psample_capture + + grep -q -e "out-tc 5" $CAPTURE_FILE + check_err $? "Sampled packets reported with wrong out-tc" + + echo $((2**16 - 1)) > $PSAMPLE_DIR/out_tc + psample_capture + + grep -q -e "out-tc " $CAPTURE_FILE + check_fail $? "Sampled packets reported with out-tc when should not" + + echo 1 > $PSAMPLE_DIR/out_tc + echo 10000 > $PSAMPLE_DIR/out_tc_occ_max + psample_capture + + grep -q -e "out-tc-occ " $CAPTURE_FILE + check_err $? "Sampled packets not reported with out-tc-occ when should" + + echo 0 > $PSAMPLE_DIR/out_tc_occ_max + psample_capture + + grep -q -e "out-tc-occ " $CAPTURE_FILE + check_fail $? "Sampled packets reported with out-tc-occ when should not" + + echo 10000 > $PSAMPLE_DIR/latency_max + psample_capture + + grep -q -e "latency " $CAPTURE_FILE + check_err $? "Sampled packets not reported with latency when should" + + echo 0 > $PSAMPLE_DIR/latency_max + psample_capture + + grep -q -e "latency " $CAPTURE_FILE + check_fail $? "Sampled packets reported with latency when should not" + + log_test "psample metadata" + + echo 0 > $PSAMPLE_DIR/enable +} + +setup_prepare() +{ + modprobe netdevsim &> /dev/null + + echo "$DEV_ADDR 1" > ${NETDEVSIM_PATH}/new_device + while [ ! -d $SYSFS_NET_DIR ] ; do :; done + + set -e + + ip netns add testns1 + devlink dev reload $DEVLINK_DEV netns testns1 + + set +e +} + +cleanup() +{ + pre_cleanup + rm -f $CAPTURE_FILE + ip netns del testns1 + echo "$DEV_ADDR" > ${NETDEVSIM_PATH}/del_device + modprobe -r netdevsim &> /dev/null +} + +trap cleanup EXIT + +setup_prepare + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/netdevsim/settings b/tools/testing/selftests/drivers/net/netdevsim/settings new file mode 100644 index 000000000000..a62d2fa1275c --- /dev/null +++ b/tools/testing/selftests/drivers/net/netdevsim/settings @@ -0,0 +1 @@ +timeout=600 diff --git a/tools/testing/selftests/drivers/net/netdevsim/tc-mq-visibility.sh b/tools/testing/selftests/drivers/net/netdevsim/tc-mq-visibility.sh new file mode 100755 index 000000000000..b411fe66510f --- /dev/null +++ b/tools/testing/selftests/drivers/net/netdevsim/tc-mq-visibility.sh @@ -0,0 +1,80 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0-only + +source ethtool-common.sh + +set -o pipefail + +n_children() { + n=$(tc qdisc show dev $NDEV | grep '^qdisc' | wc -l) + echo $((n - 1)) +} + +tcq() { + tc qdisc $1 dev $NDEV ${@:2} +} + +n_child_assert() { + n=$(n_children) + if [ $n -ne $1 ]; then + echo "ERROR ($root): ${@:2}, expected $1 have $n" + ((num_errors++)) + else + ((num_passes++)) + fi +} + + +for root in mq mqprio; do + NDEV=$(make_netdev 1 4) + + opts= + [ $root == "mqprio" ] && opts='hw 0 num_tc 1 map 0 0 0 0 queues 1@0' + + tcq add root handle 100: $root $opts + n_child_assert 4 'Init' + + # All defaults + + for n in 3 2 1 2 3 4 1 4; do + ethtool -L $NDEV combined $n + n_child_assert $n "Change queues to $n while down" + done + + ip link set dev $NDEV up + + for n in 3 2 1 2 3 4 1 4; do + ethtool -L $NDEV combined $n + n_child_assert $n "Change queues to $n while up" + done + + # One real one + tcq replace parent 100:4 handle 204: pfifo_fast + n_child_assert 4 "One real queue" + + ethtool -L $NDEV combined 1 + n_child_assert 2 "One real queue, one default" + + ethtool -L $NDEV combined 4 + n_child_assert 4 "One real queue, rest default" + + # Remove real one + tcq del parent 100:4 handle 204: + + # Replace default with pfifo + tcq replace parent 100:1 handle 205: pfifo limit 1000 + n_child_assert 3 "Deleting real one, replacing default one with pfifo" + + ethtool -L $NDEV combined 1 + n_child_assert 1 "Grafted, one" + + cleanup_nsim +done + +if [ $num_errors -eq 0 ]; then + echo "PASSED all $((num_passes)) checks" + exit 0 +else + echo "FAILED $num_errors/$((num_errors+num_passes)) checks" + exit 1 +fi diff --git a/tools/testing/selftests/drivers/net/netdevsim/udp_tunnel_nic.sh b/tools/testing/selftests/drivers/net/netdevsim/udp_tunnel_nic.sh index 1b08e042cf94..92c2f0376c08 100755 --- a/tools/testing/selftests/drivers/net/netdevsim/udp_tunnel_nic.sh +++ b/tools/testing/selftests/drivers/net/netdevsim/udp_tunnel_nic.sh @@ -142,7 +142,7 @@ function pre_ethtool { } function check_table { - local path=$NSIM_DEV_DFS/ports/$port/udp_ports_table$1 + local path=$NSIM_DEV_DFS/ports/$port/udp_ports/table$1 local -n expected=$2 local last=$3 @@ -212,7 +212,7 @@ function check_tables { } function print_table { - local path=$NSIM_DEV_DFS/ports/$port/udp_ports_table$1 + local path=$NSIM_DEV_DFS/ports/$port/udp_ports/table$1 read -a have < $path tree $NSIM_DEV_DFS/ @@ -233,6 +233,7 @@ function print_tables { function get_netdev_name { local -n old=$1 + udevadm settle new=$(ls /sys/class/net) for netdev in $new; do @@ -269,6 +270,7 @@ for port in 0 1; do echo 1 > $NSIM_DEV_SYS/new_port fi NSIM_NETDEV=`get_netdev_name old_netdevs` + ip link set dev $NSIM_NETDEV up msg="new NIC device created" exp0=( 0 0 0 0 ) @@ -282,8 +284,8 @@ for port in 0 1; do msg="VxLAN v4 devices go down" exp0=( 0 0 0 0 ) - ifconfig vxlan1 down - ifconfig vxlan0 down + ip link set dev vxlan1 down + ip link set dev vxlan0 down check_tables msg="VxLAN v6 devices" @@ -291,7 +293,7 @@ for port in 0 1; do new_vxlan vxlanA 4789 $NSIM_NETDEV 6 for ifc in vxlan0 vxlan1; do - ifconfig $ifc up + ip link set dev $ifc up done new_vxlan vxlanB 4789 $NSIM_NETDEV 6 @@ -305,14 +307,14 @@ for port in 0 1; do new_geneve gnv0 6081 msg="NIC device goes down" - ifconfig $NSIM_NETDEV down + ip link set dev $NSIM_NETDEV down if [ $port -eq 1 ]; then exp0=( 0 0 0 0 ) exp1=( 0 0 0 0 ) fi check_tables msg="NIC device goes up again" - ifconfig $NSIM_NETDEV up + ip link set dev $NSIM_NETDEV up exp0=( `mke 4789 1` `mke 4790 1` 0 0 ) exp1=( `mke 6081 2` 0 0 0 ) check_tables @@ -430,7 +432,8 @@ for port in 0 1; do fi echo $port > $NSIM_DEV_SYS/new_port - ifconfig $NSIM_NETDEV up + NSIM_NETDEV=`get_netdev_name old_netdevs` + ip link set dev $NSIM_NETDEV up overflow_table0 "overflow NIC table" overflow_table1 "overflow NIC table" @@ -487,7 +490,8 @@ for port in 0 1; do fi echo $port > $NSIM_DEV_SYS/new_port - ifconfig $NSIM_NETDEV up + NSIM_NETDEV=`get_netdev_name old_netdevs` + ip link set dev $NSIM_NETDEV up overflow_table0 "overflow NIC table" overflow_table1 "overflow NIC table" @@ -543,7 +547,8 @@ for port in 0 1; do fi echo $port > $NSIM_DEV_SYS/new_port - ifconfig $NSIM_NETDEV up + NSIM_NETDEV=`get_netdev_name old_netdevs` + ip link set dev $NSIM_NETDEV up overflow_table0 "destroy NIC" overflow_table1 "destroy NIC" @@ -572,7 +577,8 @@ for port in 0 1; do fi echo $port > $NSIM_DEV_SYS/new_port - ifconfig $NSIM_NETDEV up + NSIM_NETDEV=`get_netdev_name old_netdevs` + ip link set dev $NSIM_NETDEV up msg="create VxLANs v6" new_vxlan vxlanA0 10000 $NSIM_NETDEV 6 @@ -632,9 +638,10 @@ for port in 0 1; do fi echo $port > $NSIM_DEV_SYS/new_port - ifconfig $NSIM_NETDEV up + NSIM_NETDEV=`get_netdev_name old_netdevs` + ip link set dev $NSIM_NETDEV up - echo 110 > $NSIM_DEV_DFS/ports/$port/udp_ports_inject_error + echo 110 > $NSIM_DEV_DFS/ports/$port/udp_ports/inject_error msg="1 - create VxLANs v6" exp0=( 0 0 0 0 ) @@ -656,7 +663,7 @@ for port in 0 1; do new_geneve gnv0 20000 msg="2 - destroy GENEVE" - echo 2 > $NSIM_DEV_DFS/ports/$port/udp_ports_inject_error + echo 2 > $NSIM_DEV_DFS/ports/$port/udp_ports/inject_error exp1=( `mke 20000 2` 0 0 0 ) del_dev gnv0 @@ -687,7 +694,8 @@ for port in 0 1; do fi echo $port > $NSIM_DEV_SYS/new_port - ifconfig $NSIM_NETDEV up + NSIM_NETDEV=`get_netdev_name old_netdevs` + ip link set dev $NSIM_NETDEV up msg="create VxLANs v6" exp0=( `mke 10000 1` 0 0 0 ) @@ -746,7 +754,8 @@ for port in 0 1; do fi echo $port > $NSIM_DEV_SYS/new_port - ifconfig $NSIM_NETDEV up + NSIM_NETDEV=`get_netdev_name old_netdevs` + ip link set dev $NSIM_NETDEV up msg="create VxLANs v6" exp0=( `mke 10000 1` 0 0 0 ) @@ -755,22 +764,22 @@ for port in 0 1; do msg="create VxLANs v4" new_vxlan vxlan0 10000 $NSIM_NETDEV - echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports_reset + echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports/reset check_tables msg="NIC device goes down" - ifconfig $NSIM_NETDEV down + ip link set dev $NSIM_NETDEV down if [ $port -eq 1 ]; then exp0=( 0 0 0 0 ) exp1=( 0 0 0 0 ) fi check_tables - echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports_reset + echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports/reset check_tables msg="NIC device goes up again" - ifconfig $NSIM_NETDEV up + ip link set dev $NSIM_NETDEV up exp0=( `mke 10000 1` 0 0 0 ) check_tables @@ -780,7 +789,7 @@ for port in 0 1; do del_dev vxlan0 check_tables - echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports_reset + echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports/reset check_tables msg="destroy NIC" @@ -818,12 +827,12 @@ new_vxlan vxlan1 4789 $NSIM_NETDEV2 msg="VxLAN v4 devices go down" exp0=( 0 0 0 0 ) -ifconfig vxlan1 down -ifconfig vxlan0 down +ip link set dev vxlan1 down +ip link set dev vxlan0 down check_tables for ifc in vxlan0 vxlan1; do - ifconfig $ifc up + ip link set dev $ifc up done msg="VxLAN v6 device" @@ -835,11 +844,11 @@ exp1=( `mke 6081 2` 0 0 0 ) new_geneve gnv0 6081 msg="NIC device goes down" -ifconfig $NSIM_NETDEV down +ip link set dev $NSIM_NETDEV down check_tables msg="NIC device goes up again" -ifconfig $NSIM_NETDEV up +ip link set dev $NSIM_NETDEV up check_tables for i in `seq 2`; do @@ -876,6 +885,7 @@ msg="re-add a port" echo 2 > $NSIM_DEV_SYS/del_port echo 2 > $NSIM_DEV_SYS/new_port +NSIM_NETDEV=`get_netdev_name old_netdevs` check_tables msg="replace VxLAN in overflow table" @@ -886,7 +896,7 @@ msg="vacate VxLAN in overflow table" exp0=( `mke 10000 1` `mke 10004 1` 0 `mke 10003 1` ) del_dev vxlan2 -echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports_reset +echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports/reset check_tables msg="tunnels destroyed 2" |