diff options
Diffstat (limited to 'tools/testing/selftests/gpio/gpio-mockup.sh')
| -rwxr-xr-x | tools/testing/selftests/gpio/gpio-mockup.sh | 494 |
1 files changed, 344 insertions, 150 deletions
diff --git a/tools/testing/selftests/gpio/gpio-mockup.sh b/tools/testing/selftests/gpio/gpio-mockup.sh index 7f35b9880485..fc2dd4c24d06 100755 --- a/tools/testing/selftests/gpio/gpio-mockup.sh +++ b/tools/testing/selftests/gpio/gpio-mockup.sh @@ -1,72 +1,57 @@ -#!/bin/bash +#!/bin/bash -efu # SPDX-License-Identifier: GPL-2.0 #exit status -#1: Internal error -#2: sysfs/debugfs not mount -#3: insert module fail when gpio-mockup is a module. -#4: Skip test including run as non-root user. -#5: other reason. - -SYSFS= -GPIO_SYSFS= -GPIO_DRV_SYSFS= +#0: success +#1: fail +#4: skip test - including run as non-root user + +BASE=${0%/*} DEBUGFS= GPIO_DEBUGFS= -dev_type= -module= +dev_type="cdev" +module="gpio-mockup" +verbose= +full_test= +random= +uapi_opt= +active_opt= +bias_opt= +line_set_pid= -# Kselftest framework requirement - SKIP code is 4. +# Kselftest return codes +ksft_fail=1 ksft_skip=4 usage() { echo "Usage:" - echo "$0 [-f] [-m name] [-t type]" - echo "-f: full test. It maybe conflict with existence gpio device." - echo "-m: module name, default name is gpio-mockup. It could also test" - echo " other gpio device." - echo "-t: interface type: chardev(char device) and sysfs(being" - echo " deprecated). The first one is default" - echo "" - echo "$0 -h" - echo "This usage" + echo "$0 [-frv] [-t type]" + echo "-f: full test (minimal set run by default)" + echo "-r: test random lines as well as fence posts" + echo "-t: interface type:" + echo " cdev (character device ABI) - default" + echo " cdev_v1 (deprecated character device ABI)" + echo " sysfs (deprecated SYSFS ABI)" + echo "-v: verbose progress reporting" + exit $ksft_fail } -prerequisite() +skip() { - msg="skip all tests:" - if [ $UID != 0 ]; then - echo $msg must be run as root >&2 - exit $ksft_skip - fi - SYSFS=`mount -t sysfs | head -1 | awk '{ print $3 }'` - if [ ! -d "$SYSFS" ]; then - echo $msg sysfs is not mounted >&2 - exit 2 - fi - GPIO_SYSFS=`echo $SYSFS/class/gpio` - GPIO_DRV_SYSFS=`echo $SYSFS/devices/platform/$module/gpio` - DEBUGFS=`mount -t debugfs | head -1 | awk '{ print $3 }'` - if [ ! -d "$DEBUGFS" ]; then - echo $msg debugfs is not mounted >&2 - exit 2 - fi - GPIO_DEBUGFS=`echo $DEBUGFS/gpio` - source gpio-mockup-sysfs.sh + echo "$*" >&2 + echo "GPIO $module test SKIP" + exit $ksft_skip } -try_insert_module() +prerequisite() { - if [ -d "$GPIO_DRV_SYSFS" ]; then - echo "$GPIO_DRV_SYSFS exist. Skip insert module" - else - modprobe -q $module $1 - if [ X$? != X0 ]; then - echo $msg insmod $module failed >&2 - exit 3 - fi - fi + [ $(id -u) -eq 0 ] || skip "must be run as root" + + DEBUGFS=$(grep -w debugfs /proc/mounts | cut -f2 -d' ') + [ -d "$DEBUGFS" ] || skip "debugfs is not mounted" + + GPIO_DEBUGFS=$DEBUGFS/$module } remove_module() @@ -74,133 +59,342 @@ remove_module() modprobe -r -q $module } -die() +cleanup() { + set +e + release_line remove_module - exit 5 + jobs -p | xargs -r kill > /dev/null 2>&1 } -test_chips() +fail() { - if [ X$dev_type = Xsysfs ]; then - echo "WARNING: sysfs ABI of gpio is going to deprecated." - test_chips_sysfs $* - else - $BASE/gpio-mockup-chardev $* - fi + echo "test failed: $*" >&2 + echo "GPIO $module test FAIL" + exit $ksft_fail +} + +try_insert_module() +{ + modprobe -q $module "$1" || fail "insert $module failed with error $?" +} + +log() +{ + [ -z "$verbose" ] || echo "$*" } -gpio_test() +# The following line helpers, release_Line, get_line and set_line, all +# make use of the global $chip and $offset variables. +# +# This implementation drives the GPIO character device (cdev) uAPI. +# Other implementations may override these to test different uAPIs. + +# Release any resources related to the line +release_line() { - param=$1 - valid=$2 + [ "$line_set_pid" ] && kill $line_set_pid && wait $line_set_pid || true + line_set_pid= +} - if [ X"$param" = X ]; then - die +# Read the current value of the line +get_line() +{ + release_line + + local cdev_opts=${uapi_opt}${active_opt} + $BASE/gpio-mockup-cdev $cdev_opts /dev/$chip $offset + echo $? +} + +# Set the state of the line +# +# Changes to line configuration are provided as parameters. +# The line is assumed to be an output if the line value 0 or 1 is +# specified, else an input. +set_line() +{ + local val= + + release_line + + # parse config options... + for option in $*; do + case $option in + active-low) + active_opt="-l " + ;; + active-high) + active_opt= + ;; + bias-none) + bias_opt= + ;; + pull-down) + bias_opt="-bpull-down " + ;; + pull-up) + bias_opt="-bpull-up " + ;; + 0) + val=0 + ;; + 1) + val=1 + ;; + esac + done + + local cdev_opts=${uapi_opt}${active_opt} + if [ "$val" ]; then + $BASE/gpio-mockup-cdev $cdev_opts -s$val /dev/$chip $offset & + # failure to set is detected by reading mockup and toggling values + line_set_pid=$! + # allow for gpio-mockup-cdev to launch and request line + # (there is limited value in checking if line has been requested) + sleep 0.01 + elif [ "$bias_opt" ]; then + cdev_opts=${cdev_opts}${bias_opt} + $BASE/gpio-mockup-cdev $cdev_opts /dev/$chip $offset || true fi - try_insert_module "gpio_mockup_ranges=$param" - echo -n "GPIO $module test with ranges: <" - echo "$param>: " - printf "%-10s %s\n" $param - test_chips $module $valid - remove_module } -BASE=`dirname $0` +assert_line() +{ + local val + # don't need any retry here as set_mock allows for propagation + val=$(get_line) + [ "$val" = "$1" ] || fail "line value is ${val:-empty} when $1 was expected" +} + +# The following mockup helpers all make use of the $mock_line +assert_mock() +{ + local backoff_wait=10 + local retry=0 + local val + # retry allows for set propagation from uAPI to mockup + while true; do + val=$(< $mock_line) + [ "$val" = "$1" ] && break + retry=$((retry + 1)) + [ $retry -lt 5 ] || fail "mockup $mock_line value ${val:-empty} when $1 expected" + sleep $(printf "%0.2f" $((backoff_wait))e-3) + backoff_wait=$((backoff_wait * 2)) + done +} + +set_mock() +{ + echo "$1" > $mock_line + # allow for set propagation - so we won't be in a race with set_line + assert_mock "$1" +} -dev_type= -TEMP=`getopt -o fhm:t: -n '$0' -- "$@"` +# test the functionality of a line +# +# The line is set from the mockup side and is read from the userspace side +# (input), and is set from the userspace side and is read from the mockup side +# (output). +# +# Setting the mockup pull using the userspace interface bias settings is +# tested where supported by the userspace interface (cdev). +test_line() +{ + chip=$1 + offset=$2 + log "test_line $chip $offset" + mock_line=$GPIO_DEBUGFS/$chip/$offset + [ -e "$mock_line" ] || fail "missing line $chip:$offset" -if [ "$?" != "0" ]; then - echo "Parameter process failed, Terminating..." >&2 - exit 1 -fi + # test input active-high + set_mock 1 + set_line input active-high + assert_line 1 + set_mock 0 + assert_line 0 + set_mock 1 + assert_line 1 + + if [ "$full_test" ]; then + if [ "$dev_type" != "sysfs" ]; then + # test pulls + set_mock 0 + set_line input pull-up + assert_line 1 + set_mock 0 + assert_line 0 + + set_mock 1 + set_line input pull-down + assert_line 0 + set_mock 1 + assert_line 1 + + set_line bias-none + fi + + # test input active-low + set_mock 0 + set_line active-low + assert_line 1 + set_mock 1 + assert_line 0 + set_mock 0 + assert_line 1 + + # test output active-high + set_mock 1 + set_line active-high 0 + assert_mock 0 + set_line 1 + assert_mock 1 + set_line 0 + assert_mock 0 + fi + + # test output active-low + set_mock 0 + set_line active-low 0 + assert_mock 1 + set_line 1 + assert_mock 0 + set_line 0 + assert_mock 1 + + release_line +} + +test_no_line() +{ + log test_no_line "$*" + [ ! -e "$GPIO_DEBUGFS/$1/$2" ] || fail "unexpected line $1:$2" +} -# Note the quotes around `$TEMP': they are essential! -eval set -- "$TEMP" +# Load the module and check that the expected number of gpiochips, with the +# expected number of lines, are created and are functional. +# +# $1 is the gpio_mockup_ranges parameter for the module +# The remaining parameters are the number of lines, n, expected for each of +# the gpiochips expected to be created. +# +# For each gpiochip the fence post lines, 0 and n-1, are tested, and the +# line on the far side of the fence post, n, is tested to not exist. +# +# If the $random flag is set then a random line in the middle of the +# gpiochip is tested as well. +insmod_test() +{ + local ranges= + local gc= + local width= -while true; do - case $1 in - -f) + [ "${1:-}" ] || fail "missing ranges" + ranges=$1 ; shift + try_insert_module "gpio_mockup_ranges=$ranges" + log "GPIO $module test with ranges: <$ranges>:" + # e.g. /sys/kernel/debug/gpio-mockup/gpiochip1 + gpiochip=$(find "$DEBUGFS/$module/" -name gpiochip* -type d | sort) + for chip in $gpiochip; do + gc=${chip##*/} + [ "${1:-}" ] || fail "unexpected chip - $gc" + width=$1 ; shift + test_line $gc 0 + if [ "$random" -a $width -gt 2 ]; then + test_line $gc $((RANDOM % ($width - 2) + 1)) + fi + test_line $gc $(($width - 1)) + test_no_line $gc $width + done + [ "${1:-}" ] && fail "missing expected chip of width $1" + remove_module || fail "failed to remove module with error $?" +} + +while getopts ":frvt:" opt; do + case $opt in + f) full_test=true - shift - ;; - -h) - usage - exit ;; - -m) - module=$2 - shift 2 + r) + random=true ;; - -t) - dev_type=$2 - shift 2 + t) + dev_type=$OPTARG ;; - --) - shift - break + v) + verbose=true ;; *) - echo "Internal error!" - exit 1 + usage ;; esac done +shift $((OPTIND - 1)) -if [ X"$module" = X ]; then - module="gpio-mockup" -fi - -if [ X$dev_type != Xsysfs ]; then - dev_type="chardev" -fi +[ "${1:-}" ] && fail "unknown argument '$1'" prerequisite -echo "1. Test dynamic allocation of gpio successful means insert gpiochip and" -echo " manipulate gpio pin successful" -gpio_test "-1,32" true -gpio_test "-1,32,-1,32" true -gpio_test "-1,32,-1,32,-1,32" true -if [ X$full_test = Xtrue ]; then - gpio_test "-1,32,32,64" true - gpio_test "-1,32,40,64,-1,5" true - gpio_test "-1,32,32,64,-1,32" true - gpio_test "0,32,32,64,-1,32,-1,32" true - gpio_test "-1,32,-1,32,0,32,32,64" true - echo "2. Do basic test: successful means insert gpiochip and" - echo " manipulate gpio pin successful" - gpio_test "0,32" true - gpio_test "0,32,32,64" true - gpio_test "0,32,40,64,64,96" true +trap 'exit $ksft_fail' SIGTERM SIGINT +trap cleanup EXIT + +case "$dev_type" in +sysfs) + source $BASE/gpio-mockup-sysfs.sh + echo "WARNING: gpio sysfs ABI is deprecated." + ;; +cdev_v1) + echo "WARNING: gpio cdev ABI v1 is deprecated." + uapi_opt="-u1 " + ;; +cdev) + ;; +*) + fail "unknown interface type: $dev_type" + ;; +esac + +remove_module || fail "can't remove existing $module module" + +# manual gpio allocation tests fail if a physical chip already exists +[ "$full_test" -a -e "/dev/gpiochip0" ] && skip "full tests conflict with gpiochip0" + +echo "1. Module load tests" +echo "1.1. dynamic allocation of gpio" +insmod_test "-1,32" 32 +insmod_test "-1,23,-1,32" 23 32 +insmod_test "-1,23,-1,26,-1,32" 23 26 32 +if [ "$full_test" ]; then + echo "1.2. manual allocation of gpio" + insmod_test "0,32" 32 + insmod_test "0,32,32,60" 32 28 + insmod_test "0,32,40,64,64,96" 32 24 32 + echo "1.3. dynamic and manual allocation of gpio" + insmod_test "-1,32,32,62" 32 30 + insmod_test "-1,22,-1,23,0,24,32,64" 22 23 24 32 + insmod_test "-1,32,32,60,-1,29" 32 28 29 + insmod_test "-1,32,40,64,-1,5" 32 24 5 + insmod_test "0,32,32,44,-1,22,-1,31" 32 12 22 31 fi -echo "3. Error test: successful means insert gpiochip failed" -echo "3.1 Test number of gpio overflow" -#Currently: The max number of gpio(1024) is defined in arm architecture. -gpio_test "-1,32,-1,1024" false -if [ X$full_test = Xtrue ]; then - echo "3.2 Test zero line of gpio" - gpio_test "0,0" false - echo "3.3 Test range overlap" - echo "3.3.1 Test corner case" - gpio_test "0,32,0,1" false - gpio_test "0,32,32,64,32,40" false - gpio_test "0,32,35,64,35,45" false - gpio_test "0,32,31,32" false - gpio_test "0,32,32,64,36,37" false - gpio_test "0,32,35,64,34,36" false - echo "3.3.2 Test inserting invalid second gpiochip" - gpio_test "0,32,30,35" false - gpio_test "0,32,1,5" false - gpio_test "10,32,9,14" false - gpio_test "10,32,30,35" false - echo "3.3.3 Test others" - gpio_test "0,32,40,56,39,45" false - gpio_test "0,32,40,56,30,33" false - gpio_test "0,32,40,56,30,41" false - gpio_test "0,32,40,56,20,21" false +echo "2. Module load error tests" +echo "2.1 no lines defined" +insmod_test "0,0" +if [ "$full_test" ]; then + echo "2.2 ignore range overlap" + insmod_test "0,32,0,1" 32 + insmod_test "0,32,1,5" 32 + insmod_test "0,32,30,35" 32 + insmod_test "0,32,31,32" 32 + insmod_test "10,32,30,35" 22 + insmod_test "10,32,9,14" 22 + insmod_test "0,32,20,21,40,56" 32 16 + insmod_test "0,32,32,64,32,40" 32 32 + insmod_test "0,32,32,64,36,37" 32 32 + insmod_test "0,32,35,64,34,36" 32 29 + insmod_test "0,30,35,64,35,45" 30 29 + insmod_test "0,32,40,56,30,33" 32 16 + insmod_test "0,32,40,56,30,41" 32 16 + insmod_test "0,32,40,56,39,45" 32 16 fi -echo GPIO test PASS - +echo "GPIO $module test PASS" |