diff options
Diffstat (limited to 'tools/testing/selftests/net/Makefile')
| -rw-r--r-- | tools/testing/selftests/net/Makefile | 133 |
1 files changed, 125 insertions, 8 deletions
diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile index 895ec992b2f1..7b6918d5f4af 100644 --- a/tools/testing/selftests/net/Makefile +++ b/tools/testing/selftests/net/Makefile @@ -2,7 +2,9 @@ # Makefile for net selftests CFLAGS = -Wall -Wl,--no-as-needed -O2 -g -CFLAGS += -I../../../../usr/include/ +CFLAGS += -I../../../../usr/include/ $(KHDR_INCLUDES) +# Additional include paths needed by kselftest.h +CFLAGS += -I../ TEST_PROGS := run_netsocktests run_afpackettests test_bpf.sh netdevice.sh \ rtnetlink.sh xfrm_policy.sh test_blackhole_dev.sh @@ -11,28 +13,143 @@ TEST_PROGS += udpgso_bench.sh fib_rule_tests.sh msg_zerocopy.sh psock_snd.sh TEST_PROGS += udpgro_bench.sh udpgro.sh test_vxlan_under_vrf.sh reuseport_addr_any.sh TEST_PROGS += test_vxlan_fdb_changelink.sh so_txtime.sh ipv6_flowlabel.sh TEST_PROGS += tcp_fastopen_backup_key.sh fcnal-test.sh l2tp.sh traceroute.sh -TEST_PROGS += fin_ack_lat.sh fib_nexthop_multiprefix.sh fib_nexthops.sh -TEST_PROGS += altnames.sh icmp_redirect.sh ip6_gre_headroom.sh +TEST_PROGS += fin_ack_lat.sh fib_nexthop_multiprefix.sh fib_nexthops.sh fib_nexthop_nongw.sh +TEST_PROGS += altnames.sh icmp.sh icmp_redirect.sh ip6_gre_headroom.sh TEST_PROGS += route_localnet.sh TEST_PROGS += reuseaddr_ports_exhausted.sh TEST_PROGS += txtimestamp.sh TEST_PROGS += vrf-xfrm-tests.sh -TEST_PROGS_EXTENDED := in_netns.sh +TEST_PROGS += rxtimestamp.sh +TEST_PROGS += devlink_port_split.py +TEST_PROGS += drop_monitor_tests.sh +TEST_PROGS += vrf_route_leaking.sh +TEST_PROGS += bareudp.sh +TEST_PROGS += amt.sh +TEST_PROGS += unicast_extensions.sh +TEST_PROGS += udpgro_fwd.sh +TEST_PROGS += udpgro_frglist.sh +TEST_PROGS += veth.sh +TEST_PROGS += ioam6.sh +TEST_PROGS += gro.sh +TEST_PROGS += gre_gso.sh +TEST_PROGS += cmsg_so_mark.sh +TEST_PROGS += cmsg_time.sh cmsg_ipv6.sh +TEST_PROGS += netns-name.sh +TEST_PROGS += srv6_end_dt46_l3vpn_test.sh +TEST_PROGS += srv6_end_dt4_l3vpn_test.sh +TEST_PROGS += srv6_end_dt6_l3vpn_test.sh +TEST_PROGS += srv6_hencap_red_l3vpn_test.sh +TEST_PROGS += srv6_hl2encap_red_l2vpn_test.sh +TEST_PROGS += srv6_end_next_csid_l3vpn_test.sh +TEST_PROGS += srv6_end_x_next_csid_l3vpn_test.sh +TEST_PROGS += srv6_end_flavors_test.sh +TEST_PROGS += vrf_strict_mode_test.sh +TEST_PROGS += arp_ndisc_evict_nocarrier.sh +TEST_PROGS += ndisc_unsolicited_na_test.sh +TEST_PROGS += arp_ndisc_untracked_subnets.sh +TEST_PROGS += stress_reuseport_listen.sh +TEST_PROGS += l2_tos_ttl_inherit.sh +TEST_PROGS += bind_bhash.sh +TEST_PROGS += ip_local_port_range.sh +TEST_PROGS += rps_default_mask.sh +TEST_PROGS += big_tcp.sh +TEST_PROGS_EXTENDED := toeplitz_client.sh toeplitz.sh TEST_GEN_FILES = socket nettest TEST_GEN_FILES += psock_fanout psock_tpacket msg_zerocopy reuseport_addr_any TEST_GEN_FILES += tcp_mmap tcp_inq psock_snd txring_overwrite TEST_GEN_FILES += udpgso udpgso_bench_tx udpgso_bench_rx ip_defrag -TEST_GEN_FILES += so_txtime ipv6_flowlabel ipv6_flowlabel_mgr +TEST_GEN_FILES += so_txtime ipv6_flowlabel ipv6_flowlabel_mgr so_netns_cookie TEST_GEN_FILES += tcp_fastopen_backup_key TEST_GEN_FILES += fin_ack_lat TEST_GEN_FILES += reuseaddr_ports_exhausted TEST_GEN_FILES += hwtstamp_config rxtimestamp timestamping txtimestamp +TEST_GEN_FILES += ipsec +TEST_GEN_FILES += ioam6_parser +TEST_GEN_FILES += gro TEST_GEN_PROGS = reuseport_bpf reuseport_bpf_cpu reuseport_bpf_numa -TEST_GEN_PROGS += reuseport_dualstack reuseaddr_conflict tls +TEST_GEN_PROGS += reuseport_dualstack reuseaddr_conflict tls tun tap +TEST_GEN_FILES += toeplitz +TEST_GEN_FILES += cmsg_sender +TEST_GEN_FILES += stress_reuseport_listen +TEST_PROGS += test_vxlan_vnifiltering.sh +TEST_GEN_FILES += io_uring_zerocopy_tx +TEST_PROGS += io_uring_zerocopy_tx.sh +TEST_GEN_FILES += bind_bhash +TEST_GEN_PROGS += sk_bind_sendto_listen +TEST_GEN_PROGS += sk_connect_zero_addr +TEST_PROGS += test_ingress_egress_chaining.sh +TEST_GEN_PROGS += so_incoming_cpu +TEST_PROGS += sctp_vrf.sh +TEST_GEN_FILES += sctp_hello +TEST_GEN_FILES += csum +TEST_GEN_FILES += nat6to4.o +TEST_GEN_FILES += xdp_dummy.o +TEST_GEN_FILES += ip_local_port_range +TEST_GEN_FILES += bind_wildcard +TEST_PROGS += test_vxlan_mdb.sh +TEST_PROGS += test_bridge_neigh_suppress.sh +TEST_PROGS += test_vxlan_nolocalbypass.sh +TEST_PROGS += test_bridge_backup_port.sh +TEST_PROGS += fdb_flush.sh +TEST_PROGS += fq_band_pktlimit.sh +TEST_PROGS += vlan_hw_filter.sh + +TEST_FILES := settings +TEST_FILES += in_netns.sh lib.sh net_helper.sh setup_loopback.sh setup_veth.sh + +TEST_INCLUDES := forwarding/lib.sh -KSFT_KHDR_INSTALL := 1 include ../lib.mk $(OUTPUT)/reuseport_bpf_numa: LDLIBS += -lnuma -$(OUTPUT)/tcp_mmap: LDLIBS += -lpthread +$(OUTPUT)/tcp_mmap: LDLIBS += -lpthread -lcrypto $(OUTPUT)/tcp_inq: LDLIBS += -lpthread +$(OUTPUT)/bind_bhash: LDLIBS += -lpthread +$(OUTPUT)/io_uring_zerocopy_tx: CFLAGS += -I../../../include/ + +# Rules to generate bpf objs +CLANG ?= clang +SCRATCH_DIR := $(OUTPUT)/tools +BUILD_DIR := $(SCRATCH_DIR)/build +BPFDIR := $(abspath ../../../lib/bpf) +APIDIR := $(abspath ../../../include/uapi) + +CCINCLUDE += -I../bpf +CCINCLUDE += -I../../../../usr/include/ +CCINCLUDE += -I$(SCRATCH_DIR)/include + +BPFOBJ := $(BUILD_DIR)/libbpf/libbpf.a + +MAKE_DIRS := $(BUILD_DIR)/libbpf +$(MAKE_DIRS): + mkdir -p $@ + +# Get Clang's default includes on this system, as opposed to those seen by +# '--target=bpf'. This fixes "missing" files on some architectures/distros, +# such as asm/byteorder.h, asm/socket.h, asm/sockios.h, sys/cdefs.h etc. +# +# Use '-idirafter': Don't interfere with include mechanics except where the +# build would have failed anyways. +define get_sys_includes +$(shell $(1) $(2) -v -E - </dev/null 2>&1 \ + | sed -n '/<...> search starts here:/,/End of search list./{ s| \(/.*\)|-idirafter \1|p }') \ +$(shell $(1) $(2) -dM -E - </dev/null | grep '__riscv_xlen ' | awk '{printf("-D__riscv_xlen=%d -D__BITS_PER_LONG=%d", $$3, $$3)}') +endef + +ifneq ($(CROSS_COMPILE),) +CLANG_TARGET_ARCH = --target=$(notdir $(CROSS_COMPILE:%-=%)) +endif + +CLANG_SYS_INCLUDES = $(call get_sys_includes,$(CLANG),$(CLANG_TARGET_ARCH)) + +$(OUTPUT)/nat6to4.o $(OUTPUT)/xdp_dummy.o: $(OUTPUT)/%.o : %.c $(BPFOBJ) | $(MAKE_DIRS) + $(CLANG) -O2 --target=bpf -c $< $(CCINCLUDE) $(CLANG_SYS_INCLUDES) -o $@ + +$(BPFOBJ): $(wildcard $(BPFDIR)/*.[ch] $(BPFDIR)/Makefile) \ + $(APIDIR)/linux/bpf.h \ + | $(BUILD_DIR)/libbpf + $(MAKE) $(submake_extras) -C $(BPFDIR) OUTPUT=$(BUILD_DIR)/libbpf/ \ + EXTRA_CFLAGS='-g -O0' \ + DESTDIR=$(SCRATCH_DIR) prefix= all install_headers + +EXTRA_CLEAN := $(SCRATCH_DIR) |