diff options
Diffstat (limited to 'tools/testing/selftests/net/forwarding/lib.sh')
-rw-r--r-- | tools/testing/selftests/net/forwarding/lib.sh | 926 |
1 files changed, 850 insertions, 76 deletions
diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh index 927f9ba49e08..e579c2e0c462 100644 --- a/tools/testing/selftests/net/forwarding/lib.sh +++ b/tools/testing/selftests/net/forwarding/lib.sh @@ -8,6 +8,7 @@ PING=${PING:=ping} PING6=${PING6:=ping6} MZ=${MZ:=mausezahn} +MZ_DELAY=${MZ_DELAY:=0} ARPING=${ARPING:=arping} TEAMD=${TEAMD:=teamd} WAIT_TIME=${WAIT_TIME:=5} @@ -17,18 +18,51 @@ NETIF_TYPE=${NETIF_TYPE:=veth} NETIF_CREATE=${NETIF_CREATE:=yes} MCD=${MCD:=smcrouted} MC_CLI=${MC_CLI:=smcroutectl} +PING_COUNT=${PING_COUNT:=10} PING_TIMEOUT=${PING_TIMEOUT:=5} WAIT_TIMEOUT=${WAIT_TIMEOUT:=20} INTERFACE_TIMEOUT=${INTERFACE_TIMEOUT:=600} - -relative_path="${BASH_SOURCE%/*}" -if [[ "$relative_path" == "${BASH_SOURCE}" ]]; then - relative_path="." +LOW_AGEING_TIME=${LOW_AGEING_TIME:=1000} +REQUIRE_JQ=${REQUIRE_JQ:=yes} +REQUIRE_MZ=${REQUIRE_MZ:=yes} +REQUIRE_MTOOLS=${REQUIRE_MTOOLS:=no} +STABLE_MAC_ADDRS=${STABLE_MAC_ADDRS:=no} +TCPDUMP_EXTRA_FLAGS=${TCPDUMP_EXTRA_FLAGS:=} +TROUTE6=${TROUTE6:=traceroute6} + +net_forwarding_dir=$(dirname "$(readlink -e "${BASH_SOURCE[0]}")") + +if [[ -f $net_forwarding_dir/forwarding.config ]]; then + source "$net_forwarding_dir/forwarding.config" fi -if [[ -f $relative_path/forwarding.config ]]; then - source "$relative_path/forwarding.config" -fi +source "$net_forwarding_dir/../lib.sh" + +# timeout in seconds +slowwait() +{ + local timeout=$1; shift + + local start_time="$(date -u +%s)" + while true + do + local out + out=$("$@") + local ret=$? + if ((!ret)); then + echo -n "$out" + return 0 + fi + + local current_time="$(date -u +%s)" + if ((current_time - start_time > timeout)); then + echo -n "$out" + return 1 + fi + + sleep 0.1 + done +} ############################################################################## # Sanity checks @@ -38,7 +72,48 @@ check_tc_version() tc -j &> /dev/null if [[ $? -ne 0 ]]; then echo "SKIP: iproute2 too old; tc is missing JSON support" - exit 1 + exit $ksft_skip + fi +} + +# Old versions of tc don't understand "mpls_uc" +check_tc_mpls_support() +{ + local dev=$1; shift + + tc filter add dev $dev ingress protocol mpls_uc pref 1 handle 1 \ + matchall action pipe &> /dev/null + if [[ $? -ne 0 ]]; then + echo "SKIP: iproute2 too old; tc is missing MPLS support" + return $ksft_skip + fi + tc filter del dev $dev ingress protocol mpls_uc pref 1 handle 1 \ + matchall +} + +# Old versions of tc produce invalid json output for mpls lse statistics +check_tc_mpls_lse_stats() +{ + local dev=$1; shift + local ret; + + tc filter add dev $dev ingress protocol mpls_uc pref 1 handle 1 \ + flower mpls lse depth 2 \ + action continue &> /dev/null + + if [[ $? -ne 0 ]]; then + echo "SKIP: iproute2 too old; tc-flower is missing extended MPLS support" + return $ksft_skip + fi + + tc -j filter show dev $dev ingress protocol mpls_uc | jq . &> /dev/null + ret=$? + tc filter del dev $dev ingress protocol mpls_uc pref 1 handle 1 \ + flower + + if [[ $ret -ne 0 ]]; then + echo "SKIP: iproute2 too old; tc-flower produces invalid json output for extended MPLS filters" + return $ksft_skip fi } @@ -47,7 +122,7 @@ check_tc_shblock_support() tc filter help 2>&1 | grep block &> /dev/null if [[ $? -ne 0 ]]; then echo "SKIP: iproute2 too old; tc is missing shared block support" - exit 1 + exit $ksft_skip fi } @@ -56,7 +131,7 @@ check_tc_chain_support() tc help 2>&1|grep chain &> /dev/null if [[ $? -ne 0 ]]; then echo "SKIP: iproute2 too old; tc is missing chain support" - exit 1 + exit $ksft_skip fi } @@ -65,13 +140,85 @@ check_tc_action_hw_stats_support() tc actions help 2>&1 | grep -q hw_stats if [[ $? -ne 0 ]]; then echo "SKIP: iproute2 too old; tc is missing action hw_stats support" - exit 1 + exit $ksft_skip + fi +} + +check_tc_fp_support() +{ + tc qdisc add dev lo mqprio help 2>&1 | grep -q "fp " + if [[ $? -ne 0 ]]; then + echo "SKIP: iproute2 too old; tc is missing frame preemption support" + exit $ksft_skip + fi +} + +check_ethtool_lanes_support() +{ + ethtool --help 2>&1| grep lanes &> /dev/null + if [[ $? -ne 0 ]]; then + echo "SKIP: ethtool too old; it is missing lanes support" + exit $ksft_skip + fi +} + +check_ethtool_mm_support() +{ + ethtool --help 2>&1| grep -- '--show-mm' &> /dev/null + if [[ $? -ne 0 ]]; then + echo "SKIP: ethtool too old; it is missing MAC Merge layer support" + exit $ksft_skip + fi +} + +check_ethtool_counter_group_support() +{ + ethtool --help 2>&1| grep -- '--all-groups' &> /dev/null + if [[ $? -ne 0 ]]; then + echo "SKIP: ethtool too old; it is missing standard counter group support" + exit $ksft_skip + fi +} + +check_ethtool_pmac_std_stats_support() +{ + local dev=$1; shift + local grp=$1; shift + + [ 0 -ne $(ethtool --json -S $dev --all-groups --src pmac 2>/dev/null \ + | jq ".[].\"$grp\" | length") ] +} + +check_locked_port_support() +{ + if ! bridge -d link show | grep -q " locked"; then + echo "SKIP: iproute2 too old; Locked port feature not supported." + return $ksft_skip + fi +} + +check_port_mab_support() +{ + if ! bridge -d link show | grep -q "mab"; then + echo "SKIP: iproute2 too old; MacAuth feature not supported." + return $ksft_skip + fi +} + +skip_on_veth() +{ + local kind=$(ip -j -d link show dev ${NETIFS[p1]} | + jq -r '.[].linkinfo.info_kind') + + if [[ $kind == veth ]]; then + echo "SKIP: Test cannot be run with veth pairs" + exit $ksft_skip fi } if [[ "$(id -u)" -ne 0 ]]; then echo "SKIP: need root privileges" - exit 0 + exit $ksft_skip fi if [[ "$CHECK_TC" = "yes" ]]; then @@ -84,16 +231,26 @@ require_command() if [[ ! -x "$(command -v "$cmd")" ]]; then echo "SKIP: $cmd not installed" - exit 1 + exit $ksft_skip fi } -require_command jq -require_command $MZ +if [[ "$REQUIRE_JQ" = "yes" ]]; then + require_command jq +fi +if [[ "$REQUIRE_MZ" = "yes" ]]; then + require_command $MZ +fi +if [[ "$REQUIRE_MTOOLS" = "yes" ]]; then + # https://github.com/vladimiroltean/mtools/ + # patched for IPv6 support + require_command msend + require_command mreceive +fi if [[ ! -v NUM_NETIFS ]]; then echo "SKIP: importer does not define \"NUM_NETIFS\"" - exit 1 + exit $ksft_skip fi ############################################################################## @@ -121,6 +278,11 @@ create_netif_veth() for ((i = 1; i <= NUM_NETIFS; ++i)); do local j=$((i+1)) + if [ -z ${NETIFS[p$i]} ]; then + echo "SKIP: Cannot create interface. Name not specified" + exit $ksft_skip + fi + ip link show dev ${NETIFS[p$i]} &> /dev/null if [[ $? -ne 0 ]]; then ip link add ${NETIFS[p$i]} type veth \ @@ -145,15 +307,46 @@ create_netif() esac } +declare -A MAC_ADDR_ORIG +mac_addr_prepare() +{ + local new_addr= + local dev= + + for ((i = 1; i <= NUM_NETIFS; ++i)); do + dev=${NETIFS[p$i]} + new_addr=$(printf "00:01:02:03:04:%02x" $i) + + MAC_ADDR_ORIG["$dev"]=$(ip -j link show dev $dev | jq -e '.[].address') + # Strip quotes + MAC_ADDR_ORIG["$dev"]=${MAC_ADDR_ORIG["$dev"]//\"/} + ip link set dev $dev address $new_addr + done +} + +mac_addr_restore() +{ + local dev= + + for ((i = 1; i <= NUM_NETIFS; ++i)); do + dev=${NETIFS[p$i]} + ip link set dev $dev address ${MAC_ADDR_ORIG["$dev"]} + done +} + if [[ "$NETIF_CREATE" = "yes" ]]; then create_netif fi +if [[ "$STABLE_MAC_ADDRS" = "yes" ]]; then + mac_addr_prepare +fi + for ((i = 1; i <= NUM_NETIFS; ++i)); do ip link show dev ${NETIFS[p$i]} &> /dev/null if [[ $? -ne 0 ]]; then echo "SKIP: could not find all required interfaces" - exit 1 + exit $ksft_skip fi done @@ -227,6 +420,15 @@ log_test() return 0 } +log_test_skip() +{ + local test_name=$1 + local opt_str=$2 + + printf "TEST: %-60s [SKIP]\n" "$test_name $opt_str" + return 0 +} + log_info() { local msg=$1 @@ -234,33 +436,24 @@ log_info() echo "INFO: $msg" } -busywait() +not() { - local timeout=$1; shift + "$@" + [[ $? != 0 ]] +} - local start_time="$(date -u +%s%3N)" - while true - do - local out - out=$("$@") - local ret=$? - if ((!ret)); then - echo -n "$out" - return 0 - fi +get_max() +{ + local arr=("$@") - local current_time="$(date -u +%s%3N)" - if ((current_time - start_time > timeout)); then - echo -n "$out" - return 1 + max=${arr[0]} + for cur in ${arr[@]}; do + if [[ $cur -gt $max ]]; then + max=$cur fi done -} -not() -{ - "$@" - [[ $? != 0 ]] + echo $max } grep_bridge_fdb() @@ -279,11 +472,21 @@ grep_bridge_fdb() $@ | grep $addr | grep $flag "$word" } +wait_for_port_up() +{ + "$@" | grep -q "Link detected: yes" +} + wait_for_offload() { "$@" | grep -q offload } +wait_for_trap() +{ + "$@" | grep -q trap +} + until_counter_is() { local expr=$1; shift @@ -302,6 +505,15 @@ busywait_for_counter() busywait "$timeout" until_counter_is ">= $((base + delta))" "$@" } +slowwait_for_counter() +{ + local timeout=$1; shift + local delta=$1; shift + + local base=$("$@") + slowwait "$timeout" until_counter_is ">= $((base + delta))" "$@" +} + setup_wait_dev() { local dev=$1; shift @@ -374,33 +586,16 @@ cmd_jq() [ ! -z "$output" ] } -lldpad_app_wait_set() -{ - local dev=$1; shift - - while lldptool -t -i $dev -V APP -c app | grep -Eq "pending|unknown"; do - echo "$dev: waiting for lldpad to push pending APP updates" - sleep 5 - done -} - -lldpad_app_wait_del() -{ - # Give lldpad a chance to push down the changes. If the device is downed - # too soon, the updates will be left pending. However, they will have - # been struck off the lldpad's DB already, so we won't be able to tell - # they are pending. Then on next test iteration this would cause - # weirdness as newly-added APP rules conflict with the old ones, - # sometimes getting stuck in an "unknown" state. - sleep 5 -} - pre_cleanup() { if [ "${PAUSE_ON_CLEANUP}" = "yes" ]; then echo "Pausing before cleanup, hit any key to continue" read fi + + if [[ "$STABLE_MAC_ADDRS" = "yes" ]]; then + mac_addr_restore + fi } vrf_prepare() @@ -640,8 +835,9 @@ tc_rule_handle_stats_get() local id=$1; shift local handle=$1; shift local selector=${1:-.packets}; shift + local netns=${1:-""}; shift - tc -j -s filter show $id \ + tc $netns -j -s filter show $id \ | jq ".[] | select(.options.handle == $handle) | \ .options.actions[0].stats$selector" } @@ -654,6 +850,17 @@ ethtool_stats_get() ethtool -S $dev | grep "^ *$stat:" | head -n 1 | cut -d: -f2 } +ethtool_std_stats_get() +{ + local dev=$1; shift + local grp=$1; shift + local name=$1; shift + local src=$1; shift + + ethtool --json -S $dev --groups $grp -- --src $src | \ + jq '.[]."'"$grp"'"."'$name'"' +} + qdisc_stats_get() { local dev=$1; shift @@ -674,6 +881,52 @@ qdisc_parent_stats_get() | jq '.[] | select(.parent == "'"$parent"'") | '"$selector" } +ipv6_stats_get() +{ + local dev=$1; shift + local stat=$1; shift + + cat /proc/net/dev_snmp6/$dev | grep "^$stat" | cut -f2 +} + +hw_stats_get() +{ + local suite=$1; shift + local if_name=$1; shift + local dir=$1; shift + local stat=$1; shift + + ip -j stats show dev $if_name group offload subgroup $suite | + jq ".[0].stats64.$dir.$stat" +} + +__nh_stats_get() +{ + local key=$1; shift + local group_id=$1; shift + local member_id=$1; shift + + ip -j -s -s nexthop show id $group_id | + jq --argjson member_id "$member_id" --arg key "$key" \ + '.[].group_stats[] | select(.id == $member_id) | .[$key]' +} + +nh_stats_get() +{ + local group_id=$1; shift + local member_id=$1; shift + + __nh_stats_get packets "$group_id" "$member_id" +} + +nh_stats_get_hw() +{ + local group_id=$1; shift + local member_id=$1; shift + + __nh_stats_get packets_hw "$group_id" "$member_id" +} + humanize() { local speed=$1; shift @@ -698,6 +951,15 @@ rate() echo $((8 * (t1 - t0) / interval)) } +packets_rate() +{ + local t0=$1; shift + local t1=$1; shift + local interval=$1; shift + + echo $(((t1 - t0) / interval)) +} + mac_get() { local if_name=$1 @@ -705,6 +967,15 @@ mac_get() ip -j link show dev $if_name | jq -r '.[]["address"]' } +ipv6_lladdr_get() +{ + local if_name=$1 + + ip -j addr show dev $if_name | \ + jq -r '.[]["addr_info"][] | select(.scope == "link").local' | \ + head -1 +} + bridge_ageing_time_get() { local bridge=$1 @@ -723,14 +994,14 @@ sysctl_set() local value=$1; shift SYSCTL_ORIG[$key]=$(sysctl -n $key) - sysctl -qw $key=$value + sysctl -qw $key="$value" } sysctl_restore() { local key=$1; shift - sysctl -qw $key=${SYSCTL_ORIG["$key"]} + sysctl -qw $key="${SYSCTL_ORIG[$key]}" } forwarding_enable() @@ -1002,7 +1273,8 @@ ping_do() vrf_name=$(master_name_get $if_name) ip vrf exec $vrf_name \ - $PING $args $dip -c 10 -i 0.1 -w $PING_TIMEOUT &> /dev/null + $PING $args $dip -c $PING_COUNT -i 0.1 \ + -w $PING_TIMEOUT &> /dev/null } ping_test() @@ -1014,6 +1286,15 @@ ping_test() log_test "ping$3" } +ping_test_fails() +{ + RET=0 + + ping_do $1 $2 + check_fail $? + log_test "ping fails$3" +} + ping6_do() { local if_name=$1 @@ -1023,7 +1304,8 @@ ping6_do() vrf_name=$(master_name_get $if_name) ip vrf exec $vrf_name \ - $PING6 $args $dip -c 10 -i 0.1 -w $PING_TIMEOUT &> /dev/null + $PING6 $args $dip -c $PING_COUNT -i 0.1 \ + -w $PING_TIMEOUT &> /dev/null } ping6_test() @@ -1035,6 +1317,15 @@ ping6_test() log_test "ping6$3" } +ping6_test_fails() +{ + RET=0 + + ping6_do $1 $2 + check_fail $? + log_test "ping6 fails$3" +} + learning_test() { local bridge=$1 @@ -1055,6 +1346,7 @@ learning_test() # FDB entry was installed. bridge link set dev $br_port1 flood off + ip link set $host1_if promisc on tc qdisc add dev $host1_if ingress tc filter add dev $host1_if ingress protocol ip pref 1 handle 101 \ flower dst_mac $mac action drop @@ -1065,7 +1357,7 @@ learning_test() tc -j -s filter show dev $host1_if ingress \ | jq -e ".[] | select(.options.handle == 101) \ | select(.options.actions[0].stats.packets == 1)" &> /dev/null - check_fail $? "Packet reached second host when should not" + check_fail $? "Packet reached first host when should not" $MZ $host1_if -c 1 -p 64 -a $mac -t ip -q sleep 1 @@ -1104,6 +1396,7 @@ learning_test() tc filter del dev $host1_if ingress protocol ip pref 1 handle 101 flower tc qdisc del dev $host1_if ingress + ip link set $host1_if promisc off bridge link set dev $br_port1 flood on @@ -1121,6 +1414,7 @@ flood_test_do() # Add an ACL on `host2_if` which will tell us whether the packet # was flooded to it or not. + ip link set $host2_if promisc on tc qdisc add dev $host2_if ingress tc filter add dev $host2_if ingress protocol ip pref 1 handle 101 \ flower dst_mac $mac action drop @@ -1138,6 +1432,7 @@ flood_test_do() tc filter del dev $host2_if ingress protocol ip pref 1 handle 101 flower tc qdisc del dev $host2_if ingress + ip link set $host2_if promisc off return $err } @@ -1201,25 +1496,40 @@ flood_test() __start_traffic() { + local pktsize=$1; shift local proto=$1; shift local h_in=$1; shift # Where the traffic egresses the host local sip=$1; shift local dip=$1; shift local dmac=$1; shift - $MZ $h_in -p 8000 -A $sip -B $dip -c 0 \ + $MZ $h_in -p $pktsize -A $sip -B $dip -c 0 \ -a own -b $dmac -t "$proto" -q "$@" & sleep 1 } +start_traffic_pktsize() +{ + local pktsize=$1; shift + + __start_traffic $pktsize udp "$@" +} + +start_tcp_traffic_pktsize() +{ + local pktsize=$1; shift + + __start_traffic $pktsize tcp "$@" +} + start_traffic() { - __start_traffic udp "$@" + start_traffic_pktsize 8000 "$@" } start_tcp_traffic() { - __start_traffic tcp "$@" + start_tcp_traffic_pktsize 8000 "$@" } stop_traffic() @@ -1228,13 +1538,17 @@ stop_traffic() { kill %% && wait %%; } 2>/dev/null } +declare -A cappid +declare -A capfile +declare -A capout + tcpdump_start() { local if_name=$1; shift local ns=$1; shift - capfile=$(mktemp) - capout=$(mktemp) + capfile[$if_name]=$(mktemp) + capout[$if_name]=$(mktemp) if [ -z $ns ]; then ns_cmd="" @@ -1248,25 +1562,485 @@ tcpdump_start() capuser="-Z $SUDO_USER" fi - $ns_cmd tcpdump -e -n -Q in -i $if_name \ - -s 65535 -B 32768 $capuser -w $capfile > "$capout" 2>&1 & - cappid=$! + $ns_cmd tcpdump $TCPDUMP_EXTRA_FLAGS -e -n -Q in -i $if_name \ + -s 65535 -B 32768 $capuser -w ${capfile[$if_name]} \ + > "${capout[$if_name]}" 2>&1 & + cappid[$if_name]=$! sleep 1 } tcpdump_stop() { - $ns_cmd kill $cappid + local if_name=$1 + local pid=${cappid[$if_name]} + + $ns_cmd kill "$pid" && wait "$pid" sleep 1 } tcpdump_cleanup() { - rm $capfile $capout + local if_name=$1 + + rm ${capfile[$if_name]} ${capout[$if_name]} } tcpdump_show() { - tcpdump -e -n -r $capfile 2>&1 + local if_name=$1 + + tcpdump -e -n -r ${capfile[$if_name]} 2>&1 +} + +# return 0 if the packet wasn't seen on host2_if or 1 if it was +mcast_packet_test() +{ + local mac=$1 + local src_ip=$2 + local ip=$3 + local host1_if=$4 + local host2_if=$5 + local seen=0 + local tc_proto="ip" + local mz_v6arg="" + + # basic check to see if we were passed an IPv4 address, if not assume IPv6 + if [[ ! $ip =~ ^[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}$ ]]; then + tc_proto="ipv6" + mz_v6arg="-6" + fi + + # Add an ACL on `host2_if` which will tell us whether the packet + # was received by it or not. + tc qdisc add dev $host2_if ingress + tc filter add dev $host2_if ingress protocol $tc_proto pref 1 handle 101 \ + flower ip_proto udp dst_mac $mac action drop + + $MZ $host1_if $mz_v6arg -c 1 -p 64 -b $mac -A $src_ip -B $ip -t udp "dp=4096,sp=2048" -q + sleep 1 + + tc -j -s filter show dev $host2_if ingress \ + | jq -e ".[] | select(.options.handle == 101) \ + | select(.options.actions[0].stats.packets == 1)" &> /dev/null + if [[ $? -eq 0 ]]; then + seen=1 + fi + + tc filter del dev $host2_if ingress protocol $tc_proto pref 1 handle 101 flower + tc qdisc del dev $host2_if ingress + + return $seen +} + +brmcast_check_sg_entries() +{ + local report=$1; shift + local slist=("$@") + local sarg="" + + for src in "${slist[@]}"; do + sarg="${sarg} and .source_list[].address == \"$src\"" + done + bridge -j -d -s mdb show dev br0 \ + | jq -e ".[].mdb[] | \ + select(.grp == \"$TEST_GROUP\" and .source_list != null $sarg)" &>/dev/null + check_err $? "Wrong *,G entry source list after $report report" + + for sgent in "${slist[@]}"; do + bridge -j -d -s mdb show dev br0 \ + | jq -e ".[].mdb[] | \ + select(.grp == \"$TEST_GROUP\" and .src == \"$sgent\")" &>/dev/null + check_err $? "Missing S,G entry ($sgent, $TEST_GROUP)" + done +} + +brmcast_check_sg_fwding() +{ + local should_fwd=$1; shift + local sources=("$@") + + for src in "${sources[@]}"; do + local retval=0 + + mcast_packet_test $TEST_GROUP_MAC $src $TEST_GROUP $h2 $h1 + retval=$? + if [ $should_fwd -eq 1 ]; then + check_fail $retval "Didn't forward traffic from S,G ($src, $TEST_GROUP)" + else + check_err $retval "Forwarded traffic for blocked S,G ($src, $TEST_GROUP)" + fi + done +} + +brmcast_check_sg_state() +{ + local is_blocked=$1; shift + local sources=("$@") + local should_fail=1 + + if [ $is_blocked -eq 1 ]; then + should_fail=0 + fi + + for src in "${sources[@]}"; do + bridge -j -d -s mdb show dev br0 \ + | jq -e ".[].mdb[] | \ + select(.grp == \"$TEST_GROUP\" and .source_list != null) | + .source_list[] | + select(.address == \"$src\") | + select(.timer == \"0.00\")" &>/dev/null + check_err_fail $should_fail $? "Entry $src has zero timer" + + bridge -j -d -s mdb show dev br0 \ + | jq -e ".[].mdb[] | \ + select(.grp == \"$TEST_GROUP\" and .src == \"$src\" and \ + .flags[] == \"blocked\")" &>/dev/null + check_err_fail $should_fail $? "Entry $src has blocked flag" + done +} + +mc_join() +{ + local if_name=$1 + local group=$2 + local vrf_name=$(master_name_get $if_name) + + # We don't care about actual reception, just about joining the + # IP multicast group and adding the L2 address to the device's + # MAC filtering table + ip vrf exec $vrf_name \ + mreceive -g $group -I $if_name > /dev/null 2>&1 & + mreceive_pid=$! + + sleep 1 +} + +mc_leave() +{ + kill "$mreceive_pid" && wait "$mreceive_pid" +} + +mc_send() +{ + local if_name=$1 + local groups=$2 + local vrf_name=$(master_name_get $if_name) + + ip vrf exec $vrf_name \ + msend -g $groups -I $if_name -c 1 > /dev/null 2>&1 +} + +start_ip_monitor() +{ + local mtype=$1; shift + local ip=${1-ip}; shift + + # start the monitor in the background + tmpfile=`mktemp /var/run/nexthoptestXXX` + mpid=`($ip monitor $mtype > $tmpfile & echo $!) 2>/dev/null` + sleep 0.2 + echo "$mpid $tmpfile" +} + +stop_ip_monitor() +{ + local mpid=$1; shift + local tmpfile=$1; shift + local el=$1; shift + local what=$1; shift + + sleep 0.2 + kill $mpid + local lines=`grep '^\w' $tmpfile | wc -l` + test $lines -eq $el + check_err $? "$what: $lines lines of events, expected $el" + rm -rf $tmpfile +} + +hw_stats_monitor_test() +{ + local dev=$1; shift + local type=$1; shift + local make_suitable=$1; shift + local make_unsuitable=$1; shift + local ip=${1-ip}; shift + + RET=0 + + # Expect a notification about enablement. + local ipmout=$(start_ip_monitor stats "$ip") + $ip stats set dev $dev ${type}_stats on + stop_ip_monitor $ipmout 1 "${type}_stats enablement" + + # Expect a notification about offload. + local ipmout=$(start_ip_monitor stats "$ip") + $make_suitable + stop_ip_monitor $ipmout 1 "${type}_stats installation" + + # Expect a notification about loss of offload. + local ipmout=$(start_ip_monitor stats "$ip") + $make_unsuitable + stop_ip_monitor $ipmout 1 "${type}_stats deinstallation" + + # Expect a notification about disablement + local ipmout=$(start_ip_monitor stats "$ip") + $ip stats set dev $dev ${type}_stats off + stop_ip_monitor $ipmout 1 "${type}_stats disablement" + + log_test "${type}_stats notifications" +} + +ipv4_to_bytes() +{ + local IP=$1; shift + + printf '%02x:' ${IP//./ } | + sed 's/:$//' +} + +# Convert a given IPv6 address, `IP' such that the :: token, if present, is +# expanded, and each 16-bit group is padded with zeroes to be 4 hexadecimal +# digits. An optional `BYTESEP' parameter can be given to further separate +# individual bytes of each 16-bit group. +expand_ipv6() +{ + local IP=$1; shift + local bytesep=$1; shift + + local cvt_ip=${IP/::/_} + local colons=${cvt_ip//[^:]/} + local allcol=::::::: + # IP where :: -> the appropriate number of colons: + local allcol_ip=${cvt_ip/_/${allcol:${#colons}}} + + echo $allcol_ip | tr : '\n' | + sed s/^/0000/ | + sed 's/.*\(..\)\(..\)/\1'"$bytesep"'\2/' | + tr '\n' : | + sed 's/:$//' +} + +ipv6_to_bytes() +{ + local IP=$1; shift + + expand_ipv6 "$IP" : +} + +u16_to_bytes() +{ + local u16=$1; shift + + printf "%04x" $u16 | sed 's/^/000/;s/^.*\(..\)\(..\)$/\1:\2/' +} + +# Given a mausezahn-formatted payload (colon-separated bytes given as %02x), +# possibly with a keyword CHECKSUM stashed where a 16-bit checksum should be, +# calculate checksum as per RFC 1071, assuming the CHECKSUM field (if any) +# stands for 00:00. +payload_template_calc_checksum() +{ + local payload=$1; shift + + ( + # Set input radix. + echo "16i" + # Push zero for the initial checksum. + echo 0 + + # Pad the payload with a terminating 00: in case we get an odd + # number of bytes. + echo "${payload%:}:00:" | + sed 's/CHECKSUM/00:00/g' | + tr '[:lower:]' '[:upper:]' | + # Add the word to the checksum. + sed 's/\(..\):\(..\):/\1\2+\n/g' | + # Strip the extra odd byte we pushed if left unconverted. + sed 's/\(..\):$//' + + echo "10000 ~ +" # Calculate and add carry. + echo "FFFF r - p" # Bit-flip and print. + ) | + dc | + tr '[:upper:]' '[:lower:]' +} + +payload_template_expand_checksum() +{ + local payload=$1; shift + local checksum=$1; shift + + local ckbytes=$(u16_to_bytes $checksum) + + echo "$payload" | sed "s/CHECKSUM/$ckbytes/g" +} + +payload_template_nbytes() +{ + local payload=$1; shift + + payload_template_expand_checksum "${payload%:}" 0 | + sed 's/:/\n/g' | wc -l +} + +igmpv3_is_in_get() +{ + local GRP=$1; shift + local sources=("$@") + + local igmpv3 + local nsources=$(u16_to_bytes ${#sources[@]}) + + # IS_IN ( $sources ) + igmpv3=$(: + )"22:"$( : Type - Membership Report + )"00:"$( : Reserved + )"CHECKSUM:"$( : Checksum + )"00:00:"$( : Reserved + )"00:01:"$( : Number of Group Records + )"01:"$( : Record Type - IS_IN + )"00:"$( : Aux Data Len + )"${nsources}:"$( : Number of Sources + )"$(ipv4_to_bytes $GRP):"$( : Multicast Address + )"$(for src in "${sources[@]}"; do + ipv4_to_bytes $src + echo -n : + done)"$( : Source Addresses + ) + local checksum=$(payload_template_calc_checksum "$igmpv3") + + payload_template_expand_checksum "$igmpv3" $checksum +} + +igmpv2_leave_get() +{ + local GRP=$1; shift + + local payload=$(: + )"17:"$( : Type - Leave Group + )"00:"$( : Max Resp Time - not meaningful + )"CHECKSUM:"$( : Checksum + )"$(ipv4_to_bytes $GRP)"$( : Group Address + ) + local checksum=$(payload_template_calc_checksum "$payload") + + payload_template_expand_checksum "$payload" $checksum +} + +mldv2_is_in_get() +{ + local SIP=$1; shift + local GRP=$1; shift + local sources=("$@") + + local hbh + local icmpv6 + local nsources=$(u16_to_bytes ${#sources[@]}) + + hbh=$(: + )"3a:"$( : Next Header - ICMPv6 + )"00:"$( : Hdr Ext Len + )"00:00:00:00:00:00:"$( : Options and Padding + ) + + icmpv6=$(: + )"8f:"$( : Type - MLDv2 Report + )"00:"$( : Code + )"CHECKSUM:"$( : Checksum + )"00:00:"$( : Reserved + )"00:01:"$( : Number of Group Records + )"01:"$( : Record Type - IS_IN + )"00:"$( : Aux Data Len + )"${nsources}:"$( : Number of Sources + )"$(ipv6_to_bytes $GRP):"$( : Multicast address + )"$(for src in "${sources[@]}"; do + ipv6_to_bytes $src + echo -n : + done)"$( : Source Addresses + ) + + local len=$(u16_to_bytes $(payload_template_nbytes $icmpv6)) + local sudohdr=$(: + )"$(ipv6_to_bytes $SIP):"$( : SIP + )"$(ipv6_to_bytes $GRP):"$( : DIP is multicast address + )"${len}:"$( : Upper-layer length + )"00:3a:"$( : Zero and next-header + ) + local checksum=$(payload_template_calc_checksum ${sudohdr}${icmpv6}) + + payload_template_expand_checksum "$hbh$icmpv6" $checksum +} + +mldv1_done_get() +{ + local SIP=$1; shift + local GRP=$1; shift + + local hbh + local icmpv6 + + hbh=$(: + )"3a:"$( : Next Header - ICMPv6 + )"00:"$( : Hdr Ext Len + )"00:00:00:00:00:00:"$( : Options and Padding + ) + + icmpv6=$(: + )"84:"$( : Type - MLDv1 Done + )"00:"$( : Code + )"CHECKSUM:"$( : Checksum + )"00:00:"$( : Max Resp Delay - not meaningful + )"00:00:"$( : Reserved + )"$(ipv6_to_bytes $GRP):"$( : Multicast address + ) + + local len=$(u16_to_bytes $(payload_template_nbytes $icmpv6)) + local sudohdr=$(: + )"$(ipv6_to_bytes $SIP):"$( : SIP + )"$(ipv6_to_bytes $GRP):"$( : DIP is multicast address + )"${len}:"$( : Upper-layer length + )"00:3a:"$( : Zero and next-header + ) + local checksum=$(payload_template_calc_checksum ${sudohdr}${icmpv6}) + + payload_template_expand_checksum "$hbh$icmpv6" $checksum +} + +bail_on_lldpad() +{ + local reason1="$1"; shift + local reason2="$1"; shift + + if systemctl is-active --quiet lldpad; then + + cat >/dev/stderr <<-EOF + WARNING: lldpad is running + + lldpad will likely $reason1, and this test will + $reason2. Both are not supported at the same time, + one of them is arbitrarily going to overwrite the + other. That will cause spurious failures (or, unlikely, + passes) of this test. + EOF + + if [[ -z $ALLOW_LLDPAD ]]; then + cat >/dev/stderr <<-EOF + + If you want to run the test anyway, please set + an environment variable ALLOW_LLDPAD to a + non-empty string. + EOF + exit 1 + else + return + fi + fi +} + +absval() +{ + local v=$1; shift + + echo $((v > 0 ? v : -v)) } |