diff options
Diffstat (limited to 'tools/testing/selftests/net/mptcp/simult_flows.sh')
-rwxr-xr-x | tools/testing/selftests/net/mptcp/simult_flows.sh | 151 |
1 files changed, 76 insertions, 75 deletions
diff --git a/tools/testing/selftests/net/mptcp/simult_flows.sh b/tools/testing/selftests/net/mptcp/simult_flows.sh index 2f649b431456..1b2366220388 100755 --- a/tools/testing/selftests/net/mptcp/simult_flows.sh +++ b/tools/testing/selftests/net/mptcp/simult_flows.sh @@ -1,16 +1,30 @@ #!/bin/bash # SPDX-License-Identifier: GPL-2.0 -rndh=$(printf %x $sec)-$(mktemp -u XXXXXX) -ns1="ns1-$rndh" -ns2="ns2-$rndh" -ns3="ns3-$rndh" +# Double quotes to prevent globbing and word splitting is recommended in new +# code but we accept it, especially because there were too many before having +# address all other issues detected by shellcheck. +#shellcheck disable=SC2086 + +. "$(dirname "${0}")/mptcp_lib.sh" + +ns1="" +ns2="" +ns3="" capture=false -ksft_skip=4 -timeout=30 -test_cnt=1 +timeout_poll=30 +timeout_test=$((timeout_poll * 2 + 1)) +# a bit more space: because we have more to display +MPTCP_LIB_TEST_FORMAT="%02u %-60s" ret=0 bail=0 +slack=50 +large="" +small="" +sout="" +cout="" +capout="" +size=0 usage() { echo "Usage: $0 [ -b ] [ -c ] [ -d ]" @@ -19,23 +33,19 @@ usage() { echo -e "\t-d: debug this script" } +# This function is used in the cleanup trap +#shellcheck disable=SC2317 cleanup() { - rm -f "$cin" "$cout" - rm -f "$sin" "$sout" + rm -f "$cout" "$sout" + rm -f "$large" "$small" rm -f "$capout" - local netns - for netns in "$ns1" "$ns2" "$ns3";do - ip netns del $netns - done + mptcp_lib_ns_exit "${ns1}" "${ns2}" "${ns3}" } -ip -Version > /dev/null 2>&1 -if [ $? -ne 0 ];then - echo "SKIP: Could not run test without ip tool" - exit $ksft_skip -fi +mptcp_lib_check_mptcp +mptcp_lib_check_tools ip # "$ns1" ns2 ns3 # ns1eth1 ns2eth1 ns2eth3 ns3eth1 @@ -50,16 +60,14 @@ setup() sout=$(mktemp) cout=$(mktemp) capout=$(mktemp) - size=$((2048 * 4096)) + size=$((2 * 2048 * 4096)) + dd if=/dev/zero of=$small bs=4096 count=20 >/dev/null 2>&1 dd if=/dev/zero of=$large bs=4096 count=$((size / 4096)) >/dev/null 2>&1 trap cleanup EXIT - for i in "$ns1" "$ns2" "$ns3";do - ip netns add $i || exit $ksft_skip - ip -net $i link set lo up - done + mptcp_lib_ns_init ns1 ns2 ns3 ip link add ns1eth1 netns "$ns1" type veth peer name ns2eth1 netns "$ns2" ip link add ns1eth2 netns "$ns1" type veth peer name ns2eth2 netns "$ns2" @@ -79,7 +87,6 @@ setup() ip netns exec "$ns1" ./pm_nl_ctl limits 1 1 ip netns exec "$ns1" ./pm_nl_ctl add 10.0.2.1 dev ns1eth2 flags subflow - ip netns exec "$ns1" sysctl -q net.ipv4.conf.all.rp_filter=0 ip -net "$ns2" addr add 10.0.1.2/24 dev ns2eth1 ip -net "$ns2" addr add dead:beef:1::2/64 dev ns2eth1 nodad @@ -102,23 +109,16 @@ setup() ip -net "$ns3" route add default via dead:beef:3::2 ip netns exec "$ns3" ./pm_nl_ctl limits 1 1 -} - -# $1: ns, $2: port -wait_local_port_listen() -{ - local listener_ns="${1}" - local port="${2}" - - local port_hex i - port_hex="$(printf "%04X" "${port}")" - for i in $(seq 10); do - ip netns exec "${listener_ns}" cat /proc/net/tcp* | \ - awk "BEGIN {rc=1} {if (\$2 ~ /:${port_hex}\$/ && \$4 ~ /0A/) {rc=0; exit}} END {exit rc}" && - break - sleep 0.1 - done + # debug build can slow down measurably the test program + # we use quite tight time limit on the run-time, to ensure + # maximum B/W usage. + # Use kmemleak/lockdep/kasan/prove_locking presence as a rough + # estimate for this being a debug kernel and increase the + # maximum run-time accordingly. Observed run times for CI builds + # running selftests, including kbuild, were used to determine the + # amount of time to add. + grep -q ' kmemleak_init$\| lockdep_init$\| kasan_init$\| prove_locking$' /proc/kallsyms && slack=$((slack+550)) } do_transfer() @@ -127,18 +127,15 @@ do_transfer() local sin=$2 local max_time=$3 local port - port=$((10000+$test_cnt)) - test_cnt=$((test_cnt+1)) + port=$((10000+MPTCP_LIB_TEST_COUNTER)) :> "$cout" :> "$sout" :> "$capout" - local addr_port - addr_port=$(printf "%s:%d" ${connect_addr} ${port}) - if $capture; then local capuser + local rndh="${ns1:4}" if [ -z $SUDO_USER ] ; then capuser="" else @@ -157,14 +154,18 @@ do_transfer() sleep 1 fi - ip netns exec ${ns3} ./mptcp_connect -jt $timeout -l -p $port 0.0.0.0 < "$sin" > "$sout" & + timeout ${timeout_test} \ + ip netns exec ${ns3} \ + ./mptcp_connect -jt ${timeout_poll} -l -p $port -T $max_time \ + 0.0.0.0 < "$sin" > "$sout" & local spid=$! - wait_local_port_listen "${ns3}" "${port}" + mptcp_lib_wait_local_port_listen "${ns3}" "${port}" - local start - start=$(date +%s%3N) - ip netns exec ${ns1} ./mptcp_connect -jt $timeout -p $port 10.0.3.3 < "$cin" > "$cout" & + timeout ${timeout_test} \ + ip netns exec ${ns1} \ + ./mptcp_connect -jt ${timeout_poll} -p $port -T $max_time \ + 10.0.3.3 < "$cin" > "$cout" & local cpid=$! wait $cpid @@ -172,33 +173,26 @@ do_transfer() wait $spid local rets=$? - local stop - stop=$(date +%s%3N) - if $capture; then sleep 1 kill ${cappid_listener} kill ${cappid_connector} fi - local duration - duration=$((stop-start)) - cmp $sin $cout > /dev/null 2>&1 local cmps=$? cmp $cin $sout > /dev/null 2>&1 local cmpc=$? - printf "%16s" "$duration max $max_time " + printf "%-16s" " max $max_time " if [ $retc -eq 0 ] && [ $rets -eq 0 ] && \ - [ $cmpc -eq 0 ] && [ $cmps -eq 0 ] && \ - [ $duration -lt $max_time ]; then - echo "[ OK ]" + [ $cmpc -eq 0 ] && [ $cmps -eq 0 ]; then + mptcp_lib_pr_ok cat "$capout" return 0 fi - echo " [ fail ]" + mptcp_lib_pr_fail echo "client exit code $retc, server $rets" 1>&2 echo -e "\nnetns ${ns3} socket stat for $port:" 1>&2 ip netns exec ${ns3} ss -nita 1>&2 -o "sport = :$port" @@ -236,24 +230,29 @@ run_test() tc -n $ns2 qdisc add dev ns2eth1 root netem rate ${rate1}mbit $delay1 tc -n $ns2 qdisc add dev ns2eth2 root netem rate ${rate2}mbit $delay2 - # time is measure in ms - local time=$((size * 8 * 1000 / (( $rate1 + $rate2) * 1024 *1024) )) + # time is measured in ms, account for transfer size, aggregated link speed + # and header overhead (10%) + # ms byte -> bit 10% mbit -> kbit -> bit 10% + local time=$((1000 * size * 8 * 10 / ((rate1 + rate2) * 1000 * 1000 * 9) )) # mptcp_connect will do some sleeps to allow the mp_join handshake - # completion - time=$((time + 1350)) + # completion (see mptcp_connect): 200ms on each side, add some slack + time=$((time + 400 + slack)) - printf "%-50s" "$msg" - do_transfer $small $large $((time * 11 / 10)) + mptcp_lib_print_title "$msg" + do_transfer $small $large $time lret=$? + mptcp_lib_result_code "${lret}" "${msg}" if [ $lret -ne 0 ]; then ret=$lret [ $bail -eq 0 ] || exit $ret fi - printf "%-50s" "$msg - reverse direction" - do_transfer $large $small $((time * 11 / 10)) + msg+=" - reverse direction" + mptcp_lib_print_title "${msg}" + do_transfer $large $small $time lret=$? + mptcp_lib_result_code "${lret}" "${msg}" if [ $lret -ne 0 ]; then ret=$lret [ $bail -eq 0 ] || exit $ret @@ -264,7 +263,7 @@ while getopts "bcdh" option;do case "$option" in "h") usage $0 - exit 0 + exit ${KSFT_PASS} ;; "b") bail=1 @@ -277,17 +276,19 @@ while getopts "bcdh" option;do ;; "?") usage $0 - exit 1 + exit ${KSFT_FAIL} ;; esac done setup run_test 10 10 0 0 "balanced bwidth" -run_test 10 10 1 50 "balanced bwidth with unbalanced delay" +run_test 10 10 1 25 "balanced bwidth with unbalanced delay" # we still need some additional infrastructure to pass the following test-cases -# run_test 30 10 0 0 "unbalanced bwidth" -# run_test 30 10 1 50 "unbalanced bwidth with unbalanced delay" -# run_test 30 10 50 1 "unbalanced bwidth with opposed, unbalanced delay" +run_test 10 3 0 0 "unbalanced bwidth" +run_test 10 3 1 25 "unbalanced bwidth with unbalanced delay" +run_test 10 3 25 1 "unbalanced bwidth with opposed, unbalanced delay" + +mptcp_lib_result_print_all_tap exit $ret |