aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/tools/testing/selftests/net/rtnetlink.sh
diff options
context:
space:
mode:
Diffstat (limited to 'tools/testing/selftests/net/rtnetlink.sh')
-rwxr-xr-xtools/testing/selftests/net/rtnetlink.sh1281
1 files changed, 716 insertions, 565 deletions
diff --git a/tools/testing/selftests/net/rtnetlink.sh b/tools/testing/selftests/net/rtnetlink.sh
index 7c38a909f8b8..2e8243a65b50 100755
--- a/tools/testing/selftests/net/rtnetlink.sh
+++ b/tools/testing/selftests/net/rtnetlink.sh
@@ -4,10 +4,40 @@
#
# set -e
+ALL_TESTS="
+ kci_test_polrouting
+ kci_test_route_get
+ kci_test_addrlft
+ kci_test_promote_secondaries
+ kci_test_tc
+ kci_test_gre
+ kci_test_gretap
+ kci_test_ip6gretap
+ kci_test_erspan
+ kci_test_ip6erspan
+ kci_test_bridge
+ kci_test_addrlabel
+ kci_test_ifalias
+ kci_test_vrf
+ kci_test_encap
+ kci_test_macsec
+ kci_test_ipsec
+ kci_test_ipsec_offload
+ kci_test_fdb_get
+ kci_test_fdb_del
+ kci_test_neigh_get
+ kci_test_bridge_parent_id
+ kci_test_address_proto
+ kci_test_enslave_bonding
+ kci_test_mngtmpaddr
+"
+
devdummy="test-dummy0"
+VERBOSE=0
+PAUSE=no
+PAUSE_ON_FAIL=no
-# Kselftest framework requirement - SKIP code is 4.
-ksft_skip=4
+source lib.sh
# set global exit status, but never reset nonzero one.
check_err()
@@ -15,6 +45,7 @@ check_err()
if [ $ret -eq 0 ]; then
ret=$1
fi
+ [ -n "$2" ] && echo "$2"
}
# same but inverted -- used when command must fail for test to pass
@@ -25,35 +56,102 @@ check_fail()
fi
}
+run_cmd_common()
+{
+ local cmd="$*"
+ local out
+ if [ "$VERBOSE" = "1" ]; then
+ echo "COMMAND: ${cmd}"
+ fi
+ out=$($cmd 2>&1)
+ rc=$?
+ if [ "$VERBOSE" = "1" -a -n "$out" ]; then
+ echo " $out"
+ fi
+ return $rc
+}
+
+run_cmd() {
+ run_cmd_common "$@"
+ rc=$?
+ check_err $rc
+ return $rc
+}
+run_cmd_fail()
+{
+ run_cmd_common "$@"
+ rc=$?
+ check_fail $rc
+ return $rc
+}
+
+run_cmd_grep_common()
+{
+ local find="$1"; shift
+ local cmd="$*"
+ local out
+ if [ "$VERBOSE" = "1" ]; then
+ echo "COMMAND: ${cmd} 2>&1 | grep -q '${find}'"
+ fi
+ out=$($cmd 2>&1 | grep -q "${find}" 2>&1)
+ return $?
+}
+
+run_cmd_grep() {
+ run_cmd_grep_common "$@"
+ rc=$?
+ check_err $rc
+ return $rc
+}
+
+run_cmd_grep_fail()
+{
+ run_cmd_grep_common "$@"
+ rc=$?
+ check_fail $rc
+ return $rc
+}
+
+end_test()
+{
+ echo "$*"
+ [ "${VERBOSE}" = "1" ] && echo
+
+ if [[ $ret -ne 0 ]] && [[ "${PAUSE_ON_FAIL}" = "yes" ]]; then
+ echo "Hit enter to continue"
+ read a
+ fi;
+
+ if [ "${PAUSE}" = "yes" ]; then
+ echo "Hit enter to continue"
+ read a
+ fi
+
+}
+
+
kci_add_dummy()
{
- ip link add name "$devdummy" type dummy
- check_err $?
- ip link set "$devdummy" up
- check_err $?
+ run_cmd ip link add name "$devdummy" type dummy
+ run_cmd ip link set "$devdummy" up
}
kci_del_dummy()
{
- ip link del dev "$devdummy"
- check_err $?
+ run_cmd ip link del dev "$devdummy"
}
kci_test_netconf()
{
dev="$1"
r=$ret
-
- ip netconf show dev "$dev" > /dev/null
- check_err $?
-
+ run_cmd ip netconf show dev "$dev"
for f in 4 6; do
- ip -$f netconf show dev "$dev" > /dev/null
- check_err $?
+ run_cmd ip -$f netconf show dev "$dev"
done
if [ $ret -ne 0 ] ;then
- echo "FAIL: ip netconf show $dev"
+ end_test "FAIL: ip netconf show $dev"
test $r -eq 0 && ret=0
return 1
fi
@@ -66,43 +164,27 @@ kci_test_bridge()
vlandev="testbr-vlan1"
local ret=0
- ip link add name "$devbr" type bridge
- check_err $?
-
- ip link set dev "$devdummy" master "$devbr"
- check_err $?
-
- ip link set "$devbr" up
- check_err $?
-
- ip link add link "$devbr" name "$vlandev" type vlan id 1
- check_err $?
- ip addr add dev "$vlandev" 10.200.7.23/30
- check_err $?
- ip -6 addr add dev "$vlandev" dead:42::1234/64
- check_err $?
- ip -d link > /dev/null
- check_err $?
- ip r s t all > /dev/null
- check_err $?
+ run_cmd ip link add name "$devbr" type bridge
+ run_cmd ip link set dev "$devdummy" master "$devbr"
+ run_cmd ip link set "$devbr" up
+ run_cmd ip link add link "$devbr" name "$vlandev" type vlan id 1
+ run_cmd ip addr add dev "$vlandev" 10.200.7.23/30
+ run_cmd ip -6 addr add dev "$vlandev" dead:42::1234/64
+ run_cmd ip -d link
+ run_cmd ip r s t all
for name in "$devbr" "$vlandev" "$devdummy" ; do
kci_test_netconf "$name"
done
-
- ip -6 addr del dev "$vlandev" dead:42::1234/64
- check_err $?
-
- ip link del dev "$vlandev"
- check_err $?
- ip link del dev "$devbr"
- check_err $?
+ run_cmd ip -6 addr del dev "$vlandev" dead:42::1234/64
+ run_cmd ip link del dev "$vlandev"
+ run_cmd ip link del dev "$devbr"
if [ $ret -ne 0 ];then
- echo "FAIL: bridge setup"
+ end_test "FAIL: bridge setup"
return 1
fi
- echo "PASS: bridge setup"
+ end_test "PASS: bridge setup"
}
@@ -113,34 +195,23 @@ kci_test_gre()
loc=10.0.0.1
local ret=0
- ip tunnel add $gredev mode gre remote $rem local $loc ttl 1
- check_err $?
- ip link set $gredev up
- check_err $?
- ip addr add 10.23.7.10 dev $gredev
- check_err $?
- ip route add 10.23.8.0/30 dev $gredev
- check_err $?
- ip addr add dev "$devdummy" 10.23.7.11/24
- check_err $?
- ip link > /dev/null
- check_err $?
- ip addr > /dev/null
- check_err $?
+ run_cmd ip tunnel add $gredev mode gre remote $rem local $loc ttl 1
+ run_cmd ip link set $gredev up
+ run_cmd ip addr add 10.23.7.10 dev $gredev
+ run_cmd ip route add 10.23.8.0/30 dev $gredev
+ run_cmd ip addr add dev "$devdummy" 10.23.7.11/24
+ run_cmd ip link
+ run_cmd ip addr
kci_test_netconf "$gredev"
-
- ip addr del dev "$devdummy" 10.23.7.11/24
- check_err $?
-
- ip link del $gredev
- check_err $?
+ run_cmd ip addr del dev "$devdummy" 10.23.7.11/24
+ run_cmd ip link del $gredev
if [ $ret -ne 0 ];then
- echo "FAIL: gre tunnel endpoint"
+ end_test "FAIL: gre tunnel endpoint"
return 1
fi
- echo "PASS: gre tunnel endpoint"
+ end_test "PASS: gre tunnel endpoint"
}
# tc uses rtnetlink too, for full tc testing
@@ -150,56 +221,40 @@ kci_test_tc()
dev=lo
local ret=0
- tc qdisc add dev "$dev" root handle 1: htb
- check_err $?
- tc class add dev "$dev" parent 1: classid 1:10 htb rate 1mbit
- check_err $?
- tc filter add dev "$dev" parent 1:0 prio 5 handle ffe: protocol ip u32 divisor 256
- check_err $?
- tc filter add dev "$dev" parent 1:0 prio 5 handle ffd: protocol ip u32 divisor 256
- check_err $?
- tc filter add dev "$dev" parent 1:0 prio 5 handle ffc: protocol ip u32 divisor 256
- check_err $?
- tc filter add dev "$dev" protocol ip parent 1: prio 5 handle ffe:2:3 u32 ht ffe:2: match ip src 10.0.0.3 flowid 1:10
- check_err $?
- tc filter add dev "$dev" protocol ip parent 1: prio 5 handle ffe:2:2 u32 ht ffe:2: match ip src 10.0.0.2 flowid 1:10
- check_err $?
- tc filter show dev "$dev" parent 1:0 > /dev/null
- check_err $?
- tc filter del dev "$dev" protocol ip parent 1: prio 5 handle ffe:2:3 u32
- check_err $?
- tc filter show dev "$dev" parent 1:0 > /dev/null
- check_err $?
- tc qdisc del dev "$dev" root handle 1: htb
- check_err $?
+ run_cmd tc qdisc add dev "$dev" root handle 1: htb
+ run_cmd tc class add dev "$dev" parent 1: classid 1:10 htb rate 1mbit
+ run_cmd tc filter add dev "$dev" parent 1:0 prio 5 handle ffe: protocol ip u32 divisor 256
+ run_cmd tc filter add dev "$dev" parent 1:0 prio 5 handle ffd: protocol ip u32 divisor 256
+ run_cmd tc filter add dev "$dev" parent 1:0 prio 5 handle ffc: protocol ip u32 divisor 256
+ run_cmd tc filter add dev "$dev" protocol ip parent 1: prio 5 handle ffe:2:3 u32 ht ffe:2: match ip src 10.0.0.3 flowid 1:10
+ run_cmd tc filter add dev "$dev" protocol ip parent 1: prio 5 handle ffe:2:2 u32 ht ffe:2: match ip src 10.0.0.2 flowid 1:10
+ run_cmd tc filter show dev "$dev" parent 1:0
+ run_cmd tc filter del dev "$dev" protocol ip parent 1: prio 5 handle ffe:2:3 u32
+ run_cmd tc filter show dev "$dev" parent 1:0
+ run_cmd tc qdisc del dev "$dev" root handle 1: htb
if [ $ret -ne 0 ];then
- echo "FAIL: tc htb hierarchy"
+ end_test "FAIL: tc htb hierarchy"
return 1
fi
- echo "PASS: tc htb hierarchy"
+ end_test "PASS: tc htb hierarchy"
}
kci_test_polrouting()
{
local ret=0
- ip rule add fwmark 1 lookup 100
- check_err $?
- ip route add local 0.0.0.0/0 dev lo table 100
- check_err $?
- ip r s t all > /dev/null
- check_err $?
- ip rule del fwmark 1 lookup 100
- check_err $?
- ip route del local 0.0.0.0/0 dev lo table 100
- check_err $?
+ run_cmd ip rule add fwmark 1 lookup 100
+ run_cmd ip route add local 0.0.0.0/0 dev lo table 100
+ run_cmd ip r s t all
+ run_cmd ip rule del fwmark 1 lookup 100
+ run_cmd ip route del local 0.0.0.0/0 dev lo table 100
if [ $ret -ne 0 ];then
- echo "FAIL: policy route test"
+ end_test "FAIL: policy route test"
return 1
fi
- echo "PASS: policy routing"
+ end_test "PASS: policy routing"
}
kci_test_route_get()
@@ -207,65 +262,51 @@ kci_test_route_get()
local hash_policy=$(sysctl -n net.ipv4.fib_multipath_hash_policy)
local ret=0
-
- ip route get 127.0.0.1 > /dev/null
- check_err $?
- ip route get 127.0.0.1 dev "$devdummy" > /dev/null
- check_err $?
- ip route get ::1 > /dev/null
- check_err $?
- ip route get fe80::1 dev "$devdummy" > /dev/null
- check_err $?
- ip route get 127.0.0.1 from 127.0.0.1 oif lo tos 0x1 mark 0x1 > /dev/null
- check_err $?
- ip route get ::1 from ::1 iif lo oif lo tos 0x1 mark 0x1 > /dev/null
- check_err $?
- ip addr add dev "$devdummy" 10.23.7.11/24
- check_err $?
- ip route get 10.23.7.11 from 10.23.7.12 iif "$devdummy" > /dev/null
- check_err $?
- ip route add 10.23.8.0/24 \
+ run_cmd ip route get 127.0.0.1
+ run_cmd ip route get 127.0.0.1 dev "$devdummy"
+ run_cmd ip route get ::1
+ run_cmd ip route get fe80::1 dev "$devdummy"
+ run_cmd ip route get 127.0.0.1 from 127.0.0.1 oif lo tos 0x10 mark 0x1
+ run_cmd ip route get ::1 from ::1 iif lo oif lo tos 0x10 mark 0x1
+ run_cmd ip addr add dev "$devdummy" 10.23.7.11/24
+ run_cmd ip route get 10.23.7.11 from 10.23.7.12 iif "$devdummy"
+ run_cmd ip route add 10.23.8.0/24 \
nexthop via 10.23.7.13 dev "$devdummy" \
nexthop via 10.23.7.14 dev "$devdummy"
- check_err $?
+
sysctl -wq net.ipv4.fib_multipath_hash_policy=0
- ip route get 10.23.8.11 > /dev/null
- check_err $?
+ run_cmd ip route get 10.23.8.11
sysctl -wq net.ipv4.fib_multipath_hash_policy=1
- ip route get 10.23.8.11 > /dev/null
- check_err $?
+ run_cmd ip route get 10.23.8.11
sysctl -wq net.ipv4.fib_multipath_hash_policy="$hash_policy"
- ip route del 10.23.8.0/24
- check_err $?
- ip addr del dev "$devdummy" 10.23.7.11/24
- check_err $?
+ run_cmd ip route del 10.23.8.0/24
+ run_cmd ip addr del dev "$devdummy" 10.23.7.11/24
+
if [ $ret -ne 0 ];then
- echo "FAIL: route get"
+ end_test "FAIL: route get"
return 1
fi
- echo "PASS: route get"
+ end_test "PASS: route get"
}
kci_test_addrlft()
{
for i in $(seq 10 100) ;do
lft=$(((RANDOM%3) + 1))
- ip addr add 10.23.11.$i/32 dev "$devdummy" preferred_lft $lft valid_lft $((lft+1))
- check_err $?
+ run_cmd ip addr add 10.23.11.$i/32 dev "$devdummy" preferred_lft $lft valid_lft $((lft+1))
done
sleep 5
-
- ip addr show dev "$devdummy" | grep "10.23.11."
+ run_cmd_grep_fail "10.23.11." ip addr show dev "$devdummy"
if [ $? -eq 0 ]; then
- echo "FAIL: preferred_lft addresses remaining"
check_err 1
+ end_test "FAIL: preferred_lft addresses remaining"
return
fi
- echo "PASS: preferred_lft addresses have expired"
+ end_test "PASS: preferred_lft addresses have expired"
}
kci_test_promote_secondaries()
@@ -284,27 +325,17 @@ kci_test_promote_secondaries()
[ $promote -eq 0 ] && sysctl -q net.ipv4.conf.$devdummy.promote_secondaries=0
- echo "PASS: promote_secondaries complete"
+ end_test "PASS: promote_secondaries complete"
}
kci_test_addrlabel()
{
local ret=0
-
- ip addrlabel add prefix dead::/64 dev lo label 1
- check_err $?
-
- ip addrlabel list |grep -q "prefix dead::/64 dev lo label 1"
- check_err $?
-
- ip addrlabel del prefix dead::/64 dev lo label 1 2> /dev/null
- check_err $?
-
- ip addrlabel add prefix dead::/64 label 1 2> /dev/null
- check_err $?
-
- ip addrlabel del prefix dead::/64 label 1 2> /dev/null
- check_err $?
+ run_cmd ip addrlabel add prefix dead::/64 dev lo label 1
+ run_cmd_grep "prefix dead::/64 dev lo label 1" ip addrlabel list
+ run_cmd ip addrlabel del prefix dead::/64 dev lo label 1
+ run_cmd ip addrlabel add prefix dead::/64 label 1
+ run_cmd ip addrlabel del prefix dead::/64 label 1
# concurrent add/delete
for i in $(seq 1 1000); do
@@ -320,11 +351,11 @@ kci_test_addrlabel()
ip addrlabel del prefix 1c3::/64 label 12345 2>/dev/null
if [ $ret -ne 0 ];then
- echo "FAIL: ipv6 addrlabel"
+ end_test "FAIL: ipv6 addrlabel"
return 1
fi
- echo "PASS: ipv6 addrlabel"
+ end_test "PASS: ipv6 addrlabel"
}
kci_test_ifalias()
@@ -332,35 +363,28 @@ kci_test_ifalias()
local ret=0
namewant=$(uuidgen)
syspathname="/sys/class/net/$devdummy/ifalias"
-
- ip link set dev "$devdummy" alias "$namewant"
- check_err $?
+ run_cmd ip link set dev "$devdummy" alias "$namewant"
if [ $ret -ne 0 ]; then
- echo "FAIL: cannot set interface alias of $devdummy to $namewant"
+ end_test "FAIL: cannot set interface alias of $devdummy to $namewant"
return 1
fi
-
- ip link show "$devdummy" | grep -q "alias $namewant"
- check_err $?
+ run_cmd_grep "alias $namewant" ip link show "$devdummy"
if [ -r "$syspathname" ] ; then
read namehave < "$syspathname"
if [ "$namewant" != "$namehave" ]; then
- echo "FAIL: did set ifalias $namewant but got $namehave"
+ end_test "FAIL: did set ifalias $namewant but got $namehave"
return 1
fi
namewant=$(uuidgen)
echo "$namewant" > "$syspathname"
- ip link show "$devdummy" | grep -q "alias $namewant"
- check_err $?
+ run_cmd_grep "alias $namewant" ip link show "$devdummy"
# sysfs interface allows to delete alias again
echo "" > "$syspathname"
-
- ip link show "$devdummy" | grep -q "alias $namewant"
- check_fail $?
+ run_cmd_grep_fail "alias $namewant" ip link show "$devdummy"
for i in $(seq 1 100); do
uuidgen > "$syspathname" &
@@ -369,57 +393,48 @@ kci_test_ifalias()
wait
# re-add the alias -- kernel should free mem when dummy dev is removed
- ip link set dev "$devdummy" alias "$namewant"
- check_err $?
+ run_cmd ip link set dev "$devdummy" alias "$namewant"
+
fi
if [ $ret -ne 0 ]; then
- echo "FAIL: set interface alias $devdummy to $namewant"
+ end_test "FAIL: set interface alias $devdummy to $namewant"
return 1
fi
- echo "PASS: set ifalias $namewant for $devdummy"
+ end_test "PASS: set ifalias $namewant for $devdummy"
}
kci_test_vrf()
{
vrfname="test-vrf"
local ret=0
-
- ip link show type vrf 2>/dev/null
+ run_cmd ip link show type vrf
if [ $? -ne 0 ]; then
- echo "SKIP: vrf: iproute2 too old"
+ end_test "SKIP: vrf: iproute2 too old"
return $ksft_skip
fi
-
- ip link add "$vrfname" type vrf table 10
- check_err $?
+ run_cmd ip link add "$vrfname" type vrf table 10
if [ $ret -ne 0 ];then
- echo "FAIL: can't add vrf interface, skipping test"
+ end_test "FAIL: can't add vrf interface, skipping test"
return 0
fi
-
- ip -br link show type vrf | grep -q "$vrfname"
- check_err $?
+ run_cmd_grep "$vrfname" ip -br link show type vrf
if [ $ret -ne 0 ];then
- echo "FAIL: created vrf device not found"
+ end_test "FAIL: created vrf device not found"
return 1
fi
- ip link set dev "$vrfname" up
- check_err $?
-
- ip link set dev "$devdummy" master "$vrfname"
- check_err $?
- ip link del dev "$vrfname"
- check_err $?
+ run_cmd ip link set dev "$vrfname" up
+ run_cmd ip link set dev "$devdummy" master "$vrfname"
+ run_cmd ip link del dev "$vrfname"
if [ $ret -ne 0 ];then
- echo "FAIL: vrf"
+ end_test "FAIL: vrf"
return 1
fi
- echo "PASS: vrf"
+ end_test "PASS: vrf"
}
kci_test_encap_vxlan()
@@ -427,146 +442,92 @@ kci_test_encap_vxlan()
local ret=0
vxlan="test-vxlan0"
vlan="test-vlan0"
- testns="$1"
-
- ip -netns "$testns" link add "$vxlan" type vxlan id 42 group 239.1.1.1 \
- dev "$devdummy" dstport 4789 2>/dev/null
+ run_cmd ip -netns "$testns" link add "$vxlan" type vxlan id 42 group 239.1.1.1 \
+ dev "$devdummy" dstport 4789
if [ $? -ne 0 ]; then
- echo "FAIL: can't add vxlan interface, skipping test"
+ end_test "FAIL: can't add vxlan interface, skipping test"
return 0
fi
- check_err $?
-
- ip -netns "$testns" addr add 10.2.11.49/24 dev "$vxlan"
- check_err $?
-
- ip -netns "$testns" link set up dev "$vxlan"
- check_err $?
- ip -netns "$testns" link add link "$vxlan" name "$vlan" type vlan id 1
- check_err $?
+ run_cmd ip -netns "$testns" addr add 10.2.11.49/24 dev "$vxlan"
+ run_cmd ip -netns "$testns" link set up dev "$vxlan"
+ run_cmd ip -netns "$testns" link add link "$vxlan" name "$vlan" type vlan id 1
# changelink testcases
- ip -netns "$testns" link set dev "$vxlan" type vxlan vni 43 2>/dev/null
- check_fail $?
-
- ip -netns "$testns" link set dev "$vxlan" type vxlan group ffe5::5 dev "$devdummy" 2>/dev/null
- check_fail $?
-
- ip -netns "$testns" link set dev "$vxlan" type vxlan ttl inherit 2>/dev/null
- check_fail $?
-
- ip -netns "$testns" link set dev "$vxlan" type vxlan ttl 64
- check_err $?
-
- ip -netns "$testns" link set dev "$vxlan" type vxlan nolearning
- check_err $?
-
- ip -netns "$testns" link set dev "$vxlan" type vxlan proxy 2>/dev/null
- check_fail $?
-
- ip -netns "$testns" link set dev "$vxlan" type vxlan norsc 2>/dev/null
- check_fail $?
-
- ip -netns "$testns" link set dev "$vxlan" type vxlan l2miss 2>/dev/null
- check_fail $?
-
- ip -netns "$testns" link set dev "$vxlan" type vxlan l3miss 2>/dev/null
- check_fail $?
-
- ip -netns "$testns" link set dev "$vxlan" type vxlan external 2>/dev/null
- check_fail $?
-
- ip -netns "$testns" link set dev "$vxlan" type vxlan udpcsum 2>/dev/null
- check_fail $?
-
- ip -netns "$testns" link set dev "$vxlan" type vxlan udp6zerocsumtx 2>/dev/null
- check_fail $?
-
- ip -netns "$testns" link set dev "$vxlan" type vxlan udp6zerocsumrx 2>/dev/null
- check_fail $?
-
- ip -netns "$testns" link set dev "$vxlan" type vxlan remcsumtx 2>/dev/null
- check_fail $?
-
- ip -netns "$testns" link set dev "$vxlan" type vxlan remcsumrx 2>/dev/null
- check_fail $?
-
- ip -netns "$testns" link set dev "$vxlan" type vxlan gbp 2>/dev/null
- check_fail $?
-
- ip -netns "$testns" link set dev "$vxlan" type vxlan gpe 2>/dev/null
- check_fail $?
-
- ip -netns "$testns" link del "$vxlan"
- check_err $?
+ run_cmd_fail ip -netns "$testns" link set dev "$vxlan" type vxlan vni 43
+ run_cmd_fail ip -netns "$testns" link set dev "$vxlan" type vxlan group ffe5::5 dev "$devdummy"
+ run_cmd_fail ip -netns "$testns" link set dev "$vxlan" type vxlan ttl inherit
+
+ run_cmd ip -netns "$testns" link set dev "$vxlan" type vxlan ttl 64
+ run_cmd ip -netns "$testns" link set dev "$vxlan" type vxlan nolearning
+
+ run_cmd_fail ip -netns "$testns" link set dev "$vxlan" type vxlan proxy
+ run_cmd_fail ip -netns "$testns" link set dev "$vxlan" type vxlan norsc
+ run_cmd_fail ip -netns "$testns" link set dev "$vxlan" type vxlan l2miss
+ run_cmd_fail ip -netns "$testns" link set dev "$vxlan" type vxlan l3miss
+ run_cmd_fail ip -netns "$testns" link set dev "$vxlan" type vxlan external
+ run_cmd_fail ip -netns "$testns" link set dev "$vxlan" type vxlan udpcsum
+ run_cmd_fail ip -netns "$testns" link set dev "$vxlan" type vxlan udp6zerocsumtx
+ run_cmd_fail ip -netns "$testns" link set dev "$vxlan" type vxlan udp6zerocsumrx
+ run_cmd_fail ip -netns "$testns" link set dev "$vxlan" type vxlan remcsumtx
+ run_cmd_fail ip -netns "$testns" link set dev "$vxlan" type vxlan remcsumrx
+ run_cmd_fail ip -netns "$testns" link set dev "$vxlan" type vxlan gbp
+ run_cmd_fail ip -netns "$testns" link set dev "$vxlan" type vxlan gpe
+ run_cmd ip -netns "$testns" link del "$vxlan"
if [ $ret -ne 0 ]; then
- echo "FAIL: vxlan"
+ end_test "FAIL: vxlan"
return 1
fi
- echo "PASS: vxlan"
+ end_test "PASS: vxlan"
}
kci_test_encap_fou()
{
local ret=0
name="test-fou"
- testns="$1"
-
- ip fou help 2>&1 |grep -q 'Usage: ip fou'
+ run_cmd_grep 'Usage: ip fou' ip fou help
if [ $? -ne 0 ];then
- echo "SKIP: fou: iproute2 too old"
+ end_test "SKIP: fou: iproute2 too old"
+ return $ksft_skip
+ fi
+
+ if ! /sbin/modprobe -q -n fou; then
+ end_test "SKIP: module fou is not found"
return $ksft_skip
fi
+ /sbin/modprobe -q fou
- ip -netns "$testns" fou add port 7777 ipproto 47 2>/dev/null
+ run_cmd ip -netns "$testns" fou add port 7777 ipproto 47
if [ $? -ne 0 ];then
- echo "FAIL: can't add fou port 7777, skipping test"
+ end_test "FAIL: can't add fou port 7777, skipping test"
return 1
fi
-
- ip -netns "$testns" fou add port 8888 ipproto 4
- check_err $?
-
- ip -netns "$testns" fou del port 9999 2>/dev/null
- check_fail $?
-
- ip -netns "$testns" fou del port 7777
- check_err $?
-
+ run_cmd ip -netns "$testns" fou add port 8888 ipproto 4
+ run_cmd_fail ip -netns "$testns" fou del port 9999
+ run_cmd ip -netns "$testns" fou del port 7777
if [ $ret -ne 0 ]; then
- echo "FAIL: fou"
+ end_test "FAIL: fou"s
return 1
fi
- echo "PASS: fou"
+ end_test "PASS: fou"
}
# test various encap methods, use netns to avoid unwanted interference
kci_test_encap()
{
- testns="testns"
local ret=0
-
- ip netns add "$testns"
+ setup_ns testns
if [ $? -ne 0 ]; then
- echo "SKIP encap tests: cannot add net namespace $testns"
+ end_test "SKIP encap tests: cannot add net namespace $testns"
return $ksft_skip
fi
-
- ip -netns "$testns" link set lo up
- check_err $?
-
- ip -netns "$testns" link add name "$devdummy" type dummy
- check_err $?
- ip -netns "$testns" link set "$devdummy" up
- check_err $?
-
- kci_test_encap_vxlan "$testns"
- check_err $?
- kci_test_encap_fou "$testns"
- check_err $?
+ run_cmd ip -netns "$testns" link set lo up
+ run_cmd ip -netns "$testns" link add name "$devdummy" type dummy
+ run_cmd ip -netns "$testns" link set "$devdummy" up
+ run_cmd kci_test_encap_vxlan
+ run_cmd kci_test_encap_fou
ip netns del "$testns"
return $ret
@@ -576,41 +537,28 @@ kci_test_macsec()
{
msname="test_macsec0"
local ret=0
-
- ip macsec help 2>&1 | grep -q "^Usage: ip macsec"
+ run_cmd_grep "^Usage: ip macsec" ip macsec help
if [ $? -ne 0 ]; then
- echo "SKIP: macsec: iproute2 too old"
+ end_test "SKIP: macsec: iproute2 too old"
return $ksft_skip
fi
-
- ip link add link "$devdummy" "$msname" type macsec port 42 encrypt on
- check_err $?
+ run_cmd ip link add link "$devdummy" "$msname" type macsec port 42 encrypt on
if [ $ret -ne 0 ];then
- echo "FAIL: can't add macsec interface, skipping test"
+ end_test "FAIL: can't add macsec interface, skipping test"
return 1
fi
-
- ip macsec add "$msname" tx sa 0 pn 1024 on key 01 12345678901234567890123456789012
- check_err $?
-
- ip macsec add "$msname" rx port 1234 address "1c:ed:de:ad:be:ef"
- check_err $?
-
- ip macsec add "$msname" rx port 1234 address "1c:ed:de:ad:be:ef" sa 0 pn 1 on key 00 0123456789abcdef0123456789abcdef
- check_err $?
-
- ip macsec show > /dev/null
- check_err $?
-
- ip link del dev "$msname"
- check_err $?
+ run_cmd ip macsec add "$msname" tx sa 0 pn 1024 on key 01 12345678901234567890123456789012
+ run_cmd ip macsec add "$msname" rx port 1234 address "1c:ed:de:ad:be:ef"
+ run_cmd ip macsec add "$msname" rx port 1234 address "1c:ed:de:ad:be:ef" sa 0 pn 1 on key 00 0123456789abcdef0123456789abcdef
+ run_cmd ip macsec show
+ run_cmd ip link del dev "$msname"
if [ $ret -ne 0 ];then
- echo "FAIL: macsec"
+ end_test "FAIL: macsec"
return 1
fi
- echo "PASS: macsec"
+ end_test "PASS: macsec"
}
#-------------------------------------------------------------------
@@ -642,8 +590,7 @@ kci_test_ipsec()
ip addr add $srcip dev $devdummy
# flush to be sure there's nothing configured
- ip x s flush ; ip x p flush
- check_err $?
+ run_cmd ip x s flush ; ip x p flush
# start the monitor in the background
tmpfile=`mktemp /var/run/ipsectestXXX`
@@ -651,72 +598,57 @@ kci_test_ipsec()
sleep 0.2
ipsecid="proto esp src $srcip dst $dstip spi 0x07"
- ip x s add $ipsecid \
+ run_cmd ip x s add $ipsecid \
mode transport reqid 0x07 replay-window 32 \
$algo sel src $srcip/24 dst $dstip/24
- check_err $?
- lines=`ip x s list | grep $srcip | grep $dstip | wc -l`
- test $lines -eq 2
- check_err $?
- ip x s count | grep -q "SAD count 1"
- check_err $?
+ lines=`ip x s list | grep $srcip | grep $dstip | wc -l`
+ run_cmd test $lines -eq 2
+ run_cmd_grep "SAD count 1" ip x s count
lines=`ip x s get $ipsecid | grep $srcip | grep $dstip | wc -l`
- test $lines -eq 2
- check_err $?
-
- ip x s delete $ipsecid
- check_err $?
+ run_cmd test $lines -eq 2
+ run_cmd ip x s delete $ipsecid
lines=`ip x s list | wc -l`
- test $lines -eq 0
- check_err $?
+ run_cmd test $lines -eq 0
ipsecsel="dir out src $srcip/24 dst $dstip/24"
- ip x p add $ipsecsel \
+ run_cmd ip x p add $ipsecsel \
tmpl proto esp src $srcip dst $dstip \
spi 0x07 mode transport reqid 0x07
- check_err $?
+
lines=`ip x p list | grep $srcip | grep $dstip | wc -l`
- test $lines -eq 2
- check_err $?
+ run_cmd test $lines -eq 2
- ip x p count | grep -q "SPD IN 0 OUT 1 FWD 0"
- check_err $?
+ run_cmd_grep "SPD IN 0 OUT 1 FWD 0" ip x p count
lines=`ip x p get $ipsecsel | grep $srcip | grep $dstip | wc -l`
- test $lines -eq 2
- check_err $?
+ run_cmd test $lines -eq 2
- ip x p delete $ipsecsel
- check_err $?
+ run_cmd ip x p delete $ipsecsel
lines=`ip x p list | wc -l`
- test $lines -eq 0
- check_err $?
+ run_cmd test $lines -eq 0
# check the monitor results
kill $mpid
lines=`wc -l $tmpfile | cut "-d " -f1`
- test $lines -eq 20
- check_err $?
+ run_cmd test $lines -eq 20
rm -rf $tmpfile
# clean up any leftovers
- ip x s flush
- check_err $?
- ip x p flush
- check_err $?
+ run_cmd ip x s flush
+ run_cmd ip x p flush
ip addr del $srcip/32 dev $devdummy
if [ $ret -ne 0 ]; then
- echo "FAIL: ipsec"
+ end_test "FAIL: ipsec"
return 1
fi
- echo "PASS: ipsec"
+ end_test "PASS: ipsec"
}
#-------------------------------------------------------------------
@@ -742,12 +674,15 @@ kci_test_ipsec_offload()
sysfsnet=/sys/bus/netdevsim/devices/netdevsim0/net/
probed=false
+ if ! mount | grep -q debugfs; then
+ mount -t debugfs none /sys/kernel/debug/ &> /dev/null
+ fi
+
# setup netdevsim since dummydev doesn't have offload support
if [ ! -w /sys/bus/netdevsim/new_device ] ; then
- modprobe -q netdevsim
- check_err $?
+ run_cmd modprobe -q netdevsim
if [ $ret -ne 0 ]; then
- echo "SKIP: ipsec_offload can't load netdevsim"
+ end_test "SKIP: ipsec_offload can't load netdevsim"
return $ksft_skip
fi
probed=true
@@ -761,11 +696,11 @@ kci_test_ipsec_offload()
ip addr add $srcip dev $dev
ip link set $dev up
if [ ! -d $sysfsd ] ; then
- echo "FAIL: ipsec_offload can't create device $dev"
+ end_test "FAIL: ipsec_offload can't create device $dev"
return 1
fi
if [ ! -f $sysfsf ] ; then
- echo "FAIL: ipsec_offload netdevsim doesn't support IPsec offload"
+ end_test "FAIL: ipsec_offload netdevsim doesn't support IPsec offload"
return 1
fi
@@ -773,50 +708,51 @@ kci_test_ipsec_offload()
ip x s flush ; ip x p flush
# create offloaded SAs, both in and out
- ip x p add dir out src $srcip/24 dst $dstip/24 \
+ run_cmd ip x p add dir out src $srcip/24 dst $dstip/24 \
tmpl proto esp src $srcip dst $dstip spi 9 \
mode transport reqid 42
- check_err $?
- ip x p add dir out src $dstip/24 dst $srcip/24 \
+
+ run_cmd ip x p add dir in src $dstip/24 dst $srcip/24 \
tmpl proto esp src $dstip dst $srcip spi 9 \
mode transport reqid 42
- check_err $?
- ip x s add proto esp src $srcip dst $dstip spi 9 \
+ run_cmd ip x s add proto esp src $srcip dst $dstip spi 9 \
mode transport reqid 42 $algo sel src $srcip/24 dst $dstip/24 \
offload dev $dev dir out
- check_err $?
- ip x s add proto esp src $dstip dst $srcip spi 9 \
+
+ run_cmd ip x s add proto esp src $dstip dst $srcip spi 9 \
mode transport reqid 42 $algo sel src $dstip/24 dst $srcip/24 \
offload dev $dev dir in
- check_err $?
+
if [ $ret -ne 0 ]; then
- echo "FAIL: ipsec_offload can't create SA"
+ end_test "FAIL: ipsec_offload can't create SA"
return 1
fi
# does offload show up in ip output
lines=`ip x s list | grep -c "crypto offload parameters: dev $dev dir"`
if [ $lines -ne 2 ] ; then
- echo "FAIL: ipsec_offload SA offload missing from list output"
check_err 1
+ end_test "FAIL: ipsec_offload SA offload missing from list output"
fi
+ # we didn't create a peer, make sure we can Tx
+ ip neigh add $dstip dev $dev lladdr 00:11:22:33:44:55
# use ping to exercise the Tx path
ping -I $dev -c 3 -W 1 -i 0 $dstip >/dev/null
# does driver have correct offload info
- diff $sysfsf - << EOF
+ run_cmd diff $sysfsf - << EOF
SA count=2 tx=3
-sa[0] tx ipaddr=0x00000000 00000000 00000000 00000000
+sa[0] tx ipaddr=$dstip
sa[0] spi=0x00000009 proto=0x32 salt=0x61626364 crypt=1
sa[0] key=0x34333231 38373635 32313039 36353433
-sa[1] rx ipaddr=0x00000000 00000000 00000000 037ba8c0
+sa[1] rx ipaddr=$srcip
sa[1] spi=0x00000009 proto=0x32 salt=0x61626364 crypt=1
sa[1] key=0x34333231 38373635 32313039 36353433
EOF
if [ $? -ne 0 ] ; then
- echo "FAIL: ipsec_offload incorrect driver data"
+ end_test "FAIL: ipsec_offload incorrect driver data"
check_err 1
fi
@@ -825,255 +761,205 @@ EOF
ip x p flush
lines=`grep -c "SA count=0" $sysfsf`
if [ $lines -ne 1 ] ; then
- echo "FAIL: ipsec_offload SA not removed from driver"
check_err 1
+ end_test "FAIL: ipsec_offload SA not removed from driver"
fi
# clean up any leftovers
+ echo 0 > /sys/bus/netdevsim/del_device
$probed && rmmod netdevsim
if [ $ret -ne 0 ]; then
- echo "FAIL: ipsec_offload"
+ end_test "FAIL: ipsec_offload"
return 1
fi
- echo "PASS: ipsec_offload"
+ end_test "PASS: ipsec_offload"
}
kci_test_gretap()
{
- testns="testns"
DEV_NS=gretap00
local ret=0
- ip netns add "$testns"
+ setup_ns testns
if [ $? -ne 0 ]; then
- echo "SKIP gretap tests: cannot add net namespace $testns"
+ end_test "SKIP gretap tests: cannot add net namespace $testns"
return $ksft_skip
fi
- ip link help gretap 2>&1 | grep -q "^Usage:"
+ run_cmd_grep "^Usage:" ip link help gretap
if [ $? -ne 0 ];then
- echo "SKIP: gretap: iproute2 too old"
+ end_test "SKIP: gretap: iproute2 too old"
ip netns del "$testns"
return $ksft_skip
fi
# test native tunnel
- ip -netns "$testns" link add dev "$DEV_NS" type gretap seq \
+ run_cmd ip -netns "$testns" link add dev "$DEV_NS" type gretap seq \
key 102 local 172.16.1.100 remote 172.16.1.200
- check_err $?
- ip -netns "$testns" addr add dev "$DEV_NS" 10.1.1.100/24
- check_err $?
- ip -netns "$testns" link set dev $DEV_NS up
- check_err $?
-
- ip -netns "$testns" link del "$DEV_NS"
- check_err $?
+ run_cmd ip -netns "$testns" addr add dev "$DEV_NS" 10.1.1.100/24
+ run_cmd ip -netns "$testns" link set dev $DEV_NS up
+ run_cmd ip -netns "$testns" link del "$DEV_NS"
# test external mode
- ip -netns "$testns" link add dev "$DEV_NS" type gretap external
- check_err $?
-
- ip -netns "$testns" link del "$DEV_NS"
- check_err $?
+ run_cmd ip -netns "$testns" link add dev "$DEV_NS" type gretap external
+ run_cmd ip -netns "$testns" link del "$DEV_NS"
if [ $ret -ne 0 ]; then
- echo "FAIL: gretap"
+ end_test "FAIL: gretap"
ip netns del "$testns"
return 1
fi
- echo "PASS: gretap"
+ end_test "PASS: gretap"
ip netns del "$testns"
}
kci_test_ip6gretap()
{
- testns="testns"
DEV_NS=ip6gretap00
local ret=0
- ip netns add "$testns"
+ setup_ns testns
if [ $? -ne 0 ]; then
- echo "SKIP ip6gretap tests: cannot add net namespace $testns"
+ end_test "SKIP ip6gretap tests: cannot add net namespace $testns"
return $ksft_skip
fi
- ip link help ip6gretap 2>&1 | grep -q "^Usage:"
+ run_cmd_grep "^Usage:" ip link help ip6gretap
if [ $? -ne 0 ];then
- echo "SKIP: ip6gretap: iproute2 too old"
+ end_test "SKIP: ip6gretap: iproute2 too old"
ip netns del "$testns"
return $ksft_skip
fi
# test native tunnel
- ip -netns "$testns" link add dev "$DEV_NS" type ip6gretap seq \
+ run_cmd ip -netns "$testns" link add dev "$DEV_NS" type ip6gretap seq \
key 102 local fc00:100::1 remote fc00:100::2
- check_err $?
- ip -netns "$testns" addr add dev "$DEV_NS" fc00:200::1/96
- check_err $?
-
- ip -netns "$testns" link set dev $DEV_NS up
- check_err $?
- ip -netns "$testns" link del "$DEV_NS"
- check_err $?
+ run_cmd ip -netns "$testns" addr add dev "$DEV_NS" fc00:200::1/96
+ run_cmd ip -netns "$testns" link set dev $DEV_NS up
+ run_cmd ip -netns "$testns" link del "$DEV_NS"
# test external mode
- ip -netns "$testns" link add dev "$DEV_NS" type ip6gretap external
- check_err $?
-
- ip -netns "$testns" link del "$DEV_NS"
- check_err $?
+ run_cmd ip -netns "$testns" link add dev "$DEV_NS" type ip6gretap external
+ run_cmd ip -netns "$testns" link del "$DEV_NS"
if [ $ret -ne 0 ]; then
- echo "FAIL: ip6gretap"
+ end_test "FAIL: ip6gretap"
ip netns del "$testns"
return 1
fi
- echo "PASS: ip6gretap"
+ end_test "PASS: ip6gretap"
ip netns del "$testns"
}
kci_test_erspan()
{
- testns="testns"
DEV_NS=erspan00
local ret=0
-
- ip link help erspan 2>&1 | grep -q "^Usage:"
+ run_cmd_grep "^Usage:" ip link help erspan
if [ $? -ne 0 ];then
- echo "SKIP: erspan: iproute2 too old"
+ end_test "SKIP: erspan: iproute2 too old"
return $ksft_skip
fi
-
- ip netns add "$testns"
+ setup_ns testns
if [ $? -ne 0 ]; then
- echo "SKIP erspan tests: cannot add net namespace $testns"
+ end_test "SKIP erspan tests: cannot add net namespace $testns"
return $ksft_skip
fi
# test native tunnel erspan v1
- ip -netns "$testns" link add dev "$DEV_NS" type erspan seq \
+ run_cmd ip -netns "$testns" link add dev "$DEV_NS" type erspan seq \
key 102 local 172.16.1.100 remote 172.16.1.200 \
erspan_ver 1 erspan 488
- check_err $?
- ip -netns "$testns" addr add dev "$DEV_NS" 10.1.1.100/24
- check_err $?
-
- ip -netns "$testns" link set dev $DEV_NS up
- check_err $?
- ip -netns "$testns" link del "$DEV_NS"
- check_err $?
+ run_cmd ip -netns "$testns" addr add dev "$DEV_NS" 10.1.1.100/24
+ run_cmd ip -netns "$testns" link set dev $DEV_NS up
+ run_cmd ip -netns "$testns" link del "$DEV_NS"
# test native tunnel erspan v2
- ip -netns "$testns" link add dev "$DEV_NS" type erspan seq \
+ run_cmd ip -netns "$testns" link add dev "$DEV_NS" type erspan seq \
key 102 local 172.16.1.100 remote 172.16.1.200 \
erspan_ver 2 erspan_dir ingress erspan_hwid 7
- check_err $?
-
- ip -netns "$testns" addr add dev "$DEV_NS" 10.1.1.100/24
- check_err $?
- ip -netns "$testns" link set dev $DEV_NS up
- check_err $?
- ip -netns "$testns" link del "$DEV_NS"
- check_err $?
+ run_cmd ip -netns "$testns" addr add dev "$DEV_NS" 10.1.1.100/24
+ run_cmd ip -netns "$testns" link set dev $DEV_NS up
+ run_cmd ip -netns "$testns" link del "$DEV_NS"
# test external mode
- ip -netns "$testns" link add dev "$DEV_NS" type erspan external
- check_err $?
-
- ip -netns "$testns" link del "$DEV_NS"
- check_err $?
+ run_cmd ip -netns "$testns" link add dev "$DEV_NS" type erspan external
+ run_cmd ip -netns "$testns" link del "$DEV_NS"
if [ $ret -ne 0 ]; then
- echo "FAIL: erspan"
+ end_test "FAIL: erspan"
ip netns del "$testns"
return 1
fi
- echo "PASS: erspan"
+ end_test "PASS: erspan"
ip netns del "$testns"
}
kci_test_ip6erspan()
{
- testns="testns"
DEV_NS=ip6erspan00
local ret=0
-
- ip link help ip6erspan 2>&1 | grep -q "^Usage:"
+ run_cmd_grep "^Usage:" ip link help ip6erspan
if [ $? -ne 0 ];then
- echo "SKIP: ip6erspan: iproute2 too old"
+ end_test "SKIP: ip6erspan: iproute2 too old"
return $ksft_skip
fi
-
- ip netns add "$testns"
+ setup_ns testns
if [ $? -ne 0 ]; then
- echo "SKIP ip6erspan tests: cannot add net namespace $testns"
+ end_test "SKIP ip6erspan tests: cannot add net namespace $testns"
return $ksft_skip
fi
# test native tunnel ip6erspan v1
- ip -netns "$testns" link add dev "$DEV_NS" type ip6erspan seq \
+ run_cmd ip -netns "$testns" link add dev "$DEV_NS" type ip6erspan seq \
key 102 local fc00:100::1 remote fc00:100::2 \
erspan_ver 1 erspan 488
- check_err $?
- ip -netns "$testns" addr add dev "$DEV_NS" 10.1.1.100/24
- check_err $?
- ip -netns "$testns" link set dev $DEV_NS up
- check_err $?
-
- ip -netns "$testns" link del "$DEV_NS"
- check_err $?
+ run_cmd ip -netns "$testns" addr add dev "$DEV_NS" 10.1.1.100/24
+ run_cmd ip -netns "$testns" link set dev $DEV_NS up
+ run_cmd ip -netns "$testns" link del "$DEV_NS"
# test native tunnel ip6erspan v2
- ip -netns "$testns" link add dev "$DEV_NS" type ip6erspan seq \
+ run_cmd ip -netns "$testns" link add dev "$DEV_NS" type ip6erspan seq \
key 102 local fc00:100::1 remote fc00:100::2 \
erspan_ver 2 erspan_dir ingress erspan_hwid 7
- check_err $?
-
- ip -netns "$testns" addr add dev "$DEV_NS" 10.1.1.100/24
- check_err $?
- ip -netns "$testns" link set dev $DEV_NS up
- check_err $?
- ip -netns "$testns" link del "$DEV_NS"
- check_err $?
+ run_cmd ip -netns "$testns" addr add dev "$DEV_NS" 10.1.1.100/24
+ run_cmd ip -netns "$testns" link set dev $DEV_NS up
+ run_cmd ip -netns "$testns" link del "$DEV_NS"
# test external mode
- ip -netns "$testns" link add dev "$DEV_NS" \
+ run_cmd ip -netns "$testns" link add dev "$DEV_NS" \
type ip6erspan external
- check_err $?
- ip -netns "$testns" link del "$DEV_NS"
- check_err $?
+ run_cmd ip -netns "$testns" link del "$DEV_NS"
if [ $ret -ne 0 ]; then
- echo "FAIL: ip6erspan"
+ end_test "FAIL: ip6erspan"
ip netns del "$testns"
return 1
fi
- echo "PASS: ip6erspan"
+ end_test "PASS: ip6erspan"
ip netns del "$testns"
}
kci_test_fdb_get()
{
- IP="ip -netns testns"
- BRIDGE="bridge -netns testns"
brdev="test-br0"
vxlandev="vxlan10"
test_mac=de:ad:be:ef:13:37
@@ -1081,45 +967,76 @@ kci_test_fdb_get()
dstip="10.0.2.3"
local ret=0
- bridge fdb help 2>&1 |grep -q 'bridge fdb get'
+ run_cmd_grep 'bridge fdb get' bridge fdb help
if [ $? -ne 0 ];then
- echo "SKIP: fdb get tests: iproute2 too old"
+ end_test "SKIP: fdb get tests: iproute2 too old"
return $ksft_skip
fi
- ip netns add testns
+ setup_ns testns
if [ $? -ne 0 ]; then
- echo "SKIP fdb get tests: cannot add net namespace $testns"
+ end_test "SKIP fdb get tests: cannot add net namespace $testns"
return $ksft_skip
fi
+ IP="ip -netns $testns"
+ BRIDGE="bridge -netns $testns"
+ run_cmd $IP link add "$vxlandev" type vxlan id 10 local $localip \
+ dstport 4789
+ run_cmd $IP link add name "$brdev" type bridge
+ run_cmd $IP link set dev "$vxlandev" master "$brdev"
+ run_cmd $BRIDGE fdb add $test_mac dev "$vxlandev" master
+ run_cmd $BRIDGE fdb add $test_mac dev "$vxlandev" dst $dstip self
+ run_cmd_grep "dev $vxlandev master $brdev" $BRIDGE fdb get $test_mac brport "$vxlandev"
+ run_cmd_grep "dev $vxlandev master $brdev" $BRIDGE fdb get $test_mac br "$brdev"
+ run_cmd_grep "dev $vxlandev dst $dstip" $BRIDGE fdb get $test_mac dev "$vxlandev" self
+
+ ip netns del $testns &>/dev/null
- $IP link add "$vxlandev" type vxlan id 10 local $localip \
- dstport 4789 2>/dev/null
- check_err $?
- $IP link add name "$brdev" type bridge &>/dev/null
- check_err $?
- $IP link set dev "$vxlandev" master "$brdev" &>/dev/null
- check_err $?
- $BRIDGE fdb add $test_mac dev "$vxlandev" master &>/dev/null
- check_err $?
- $BRIDGE fdb add $test_mac dev "$vxlandev" dst $dstip self &>/dev/null
- check_err $?
+ if [ $ret -ne 0 ]; then
+ end_test "FAIL: bridge fdb get"
+ return 1
+ fi
- $BRIDGE fdb get $test_mac brport "$vxlandev" 2>/dev/null | grep -q "dev $vxlandev master $brdev"
- check_err $?
- $BRIDGE fdb get $test_mac br "$brdev" 2>/dev/null | grep -q "dev $vxlandev master $brdev"
- check_err $?
- $BRIDGE fdb get $test_mac dev "$vxlandev" self 2>/dev/null | grep -q "dev $vxlandev dst $dstip"
- check_err $?
+ end_test "PASS: bridge fdb get"
+}
+
+kci_test_fdb_del()
+{
+ local test_mac=de:ad:be:ef:13:37
+ local dummydev="dummy1"
+ local brdev="test-br0"
+ local ret=0
+
+ run_cmd_grep 'bridge fdb get' bridge fdb help
+ if [ $? -ne 0 ]; then
+ end_test "SKIP: fdb del tests: iproute2 too old"
+ return $ksft_skip
+ fi
- ip netns del testns &>/dev/null
+ setup_ns testns
+ if [ $? -ne 0 ]; then
+ end_test "SKIP fdb del tests: cannot add net namespace $testns"
+ return $ksft_skip
+ fi
+ IP="ip -netns $testns"
+ BRIDGE="bridge -netns $testns"
+ run_cmd $IP link add $dummydev type dummy
+ run_cmd $IP link add name $brdev type bridge vlan_filtering 1
+ run_cmd $IP link set dev $dummydev master $brdev
+ run_cmd $BRIDGE fdb add $test_mac dev $dummydev master static vlan 1
+ run_cmd $BRIDGE vlan del vid 1 dev $dummydev
+ run_cmd $BRIDGE fdb get $test_mac br $brdev vlan 1
+ run_cmd $BRIDGE fdb del $test_mac dev $dummydev master vlan 1
+ run_cmd_fail $BRIDGE fdb get $test_mac br $brdev vlan 1
+
+ ip netns del $testns &>/dev/null
if [ $ret -ne 0 ]; then
- echo "FAIL: bridge fdb get"
+ end_test "FAIL: bridge fdb del"
return 1
fi
- echo "PASS: bridge fdb get"
+ end_test "PASS: bridge fdb del"
}
kci_test_neigh_get()
@@ -1129,120 +1046,354 @@ kci_test_neigh_get()
dstip6=dead::2
local ret=0
- ip neigh help 2>&1 |grep -q 'ip neigh get'
+ run_cmd_grep 'ip neigh get' ip neigh help
if [ $? -ne 0 ];then
- echo "SKIP: fdb get tests: iproute2 too old"
+ end_test "SKIP: fdb get tests: iproute2 too old"
return $ksft_skip
fi
# ipv4
- ip neigh add $dstip lladdr $dstmac dev "$devdummy" > /dev/null
- check_err $?
- ip neigh get $dstip dev "$devdummy" 2> /dev/null | grep -q "$dstmac"
- check_err $?
- ip neigh del $dstip lladdr $dstmac dev "$devdummy" > /dev/null
- check_err $?
+ run_cmd ip neigh add $dstip lladdr $dstmac dev "$devdummy"
+ run_cmd_grep "$dstmac" ip neigh get $dstip dev "$devdummy"
+ run_cmd ip neigh del $dstip lladdr $dstmac dev "$devdummy"
# ipv4 proxy
- ip neigh add proxy $dstip dev "$devdummy" > /dev/null
- check_err $?
- ip neigh get proxy $dstip dev "$devdummy" 2>/dev/null | grep -q "$dstip"
- check_err $?
- ip neigh del proxy $dstip dev "$devdummy" > /dev/null
- check_err $?
+ run_cmd ip neigh add proxy $dstip dev "$devdummy"
+ run_cmd_grep "$dstip" ip neigh get proxy $dstip dev "$devdummy"
+ run_cmd ip neigh del proxy $dstip dev "$devdummy"
# ipv6
- ip neigh add $dstip6 lladdr $dstmac dev "$devdummy" > /dev/null
- check_err $?
- ip neigh get $dstip6 dev "$devdummy" 2> /dev/null | grep -q "$dstmac"
- check_err $?
- ip neigh del $dstip6 lladdr $dstmac dev "$devdummy" > /dev/null
- check_err $?
+ run_cmd ip neigh add $dstip6 lladdr $dstmac dev "$devdummy"
+ run_cmd_grep "$dstmac" ip neigh get $dstip6 dev "$devdummy"
+ run_cmd ip neigh del $dstip6 lladdr $dstmac dev "$devdummy"
# ipv6 proxy
- ip neigh add proxy $dstip6 dev "$devdummy" > /dev/null
- check_err $?
- ip neigh get proxy $dstip6 dev "$devdummy" 2>/dev/null | grep -q "$dstip6"
- check_err $?
- ip neigh del proxy $dstip6 dev "$devdummy" > /dev/null
- check_err $?
+ run_cmd ip neigh add proxy $dstip6 dev "$devdummy"
+ run_cmd_grep "$dstip6" ip neigh get proxy $dstip6 dev "$devdummy"
+ run_cmd ip neigh del proxy $dstip6 dev "$devdummy"
if [ $ret -ne 0 ];then
- echo "FAIL: neigh get"
+ end_test "FAIL: neigh get"
return 1
fi
- echo "PASS: neigh get"
+ end_test "PASS: neigh get"
}
-kci_test_rtnl()
+kci_test_bridge_parent_id()
{
local ret=0
- kci_add_dummy
- if [ $ret -ne 0 ];then
- echo "FAIL: cannot add dummy interface"
+ sysfsnet=/sys/bus/netdevsim/devices/netdevsim
+ probed=false
+
+ if [ ! -w /sys/bus/netdevsim/new_device ] ; then
+ run_cmd modprobe -q netdevsim
+ if [ $ret -ne 0 ]; then
+ end_test "SKIP: bridge_parent_id can't load netdevsim"
+ return $ksft_skip
+ fi
+ probed=true
+ fi
+
+ echo "10 1" > /sys/bus/netdevsim/new_device
+ while [ ! -d ${sysfsnet}10 ] ; do :; done
+ echo "20 1" > /sys/bus/netdevsim/new_device
+ while [ ! -d ${sysfsnet}20 ] ; do :; done
+ udevadm settle
+ dev10=`ls ${sysfsnet}10/net/`
+ dev20=`ls ${sysfsnet}20/net/`
+ run_cmd ip link add name test-bond0 type bond mode 802.3ad
+ run_cmd ip link set dev $dev10 master test-bond0
+ run_cmd ip link set dev $dev20 master test-bond0
+ run_cmd ip link add name test-br0 type bridge
+ run_cmd ip link set dev test-bond0 master test-br0
+
+ # clean up any leftovers
+ ip link del dev test-br0
+ ip link del dev test-bond0
+ echo 20 > /sys/bus/netdevsim/del_device
+ echo 10 > /sys/bus/netdevsim/del_device
+ $probed && rmmod netdevsim
+
+ if [ $ret -ne 0 ]; then
+ end_test "FAIL: bridge_parent_id"
return 1
fi
+ end_test "PASS: bridge_parent_id"
+}
- kci_test_polrouting
- check_err $?
- kci_test_route_get
- check_err $?
- kci_test_addrlft
+address_get_proto()
+{
+ local addr=$1; shift
+
+ ip -N -j address show dev "$devdummy" |
+ jq -e -r --arg addr "${addr%/*}" \
+ '.[].addr_info[] | select(.local == $addr) | .protocol'
+}
+
+address_count()
+{
+ ip -N -j address show dev "$devdummy" "$@" |
+ jq -e -r '[.[].addr_info[] | .local | select(. != null)] | length'
+}
+
+do_test_address_proto()
+{
+ local what=$1; shift
+ local addr=$1; shift
+ local addr2=${addr%/*}2/${addr#*/}
+ local addr3=${addr%/*}3/${addr#*/}
+ local proto
+ local count
+ local ret=0
+ local err
+
+ ip address add dev "$devdummy" "$addr3"
check_err $?
- kci_test_promote_secondaries
+ proto=$(address_get_proto "$addr3")
+ [[ "$proto" == null ]]
check_err $?
- kci_test_tc
+
+ ip address add dev "$devdummy" "$addr2" proto 0x99
check_err $?
- kci_test_gre
+ proto=$(address_get_proto "$addr2")
+ [[ "$proto" == 0x99 ]]
check_err $?
- kci_test_gretap
+
+ ip address add dev "$devdummy" "$addr" proto 0xab
check_err $?
- kci_test_ip6gretap
+ proto=$(address_get_proto "$addr")
+ [[ "$proto" == 0xab ]]
check_err $?
- kci_test_erspan
+
+ ip address replace dev "$devdummy" "$addr" proto 0x11
+ proto=$(address_get_proto "$addr")
check_err $?
- kci_test_ip6erspan
+ [[ "$proto" == 0x11 ]]
check_err $?
- kci_test_bridge
+
+ count=$(address_count)
check_err $?
- kci_test_addrlabel
+ (( count >= 3 )) # $addr, $addr2 and $addr3 plus any kernel addresses
check_err $?
- kci_test_ifalias
+
+ count=$(address_count proto 0)
check_err $?
- kci_test_vrf
+ (( count == 1 )) # just $addr3
check_err $?
- kci_test_encap
+
+ count=$(address_count proto 0x11)
check_err $?
- kci_test_macsec
+ (( count == 2 )) # $addr and $addr3
check_err $?
- kci_test_ipsec
+
+ count=$(address_count proto 0xab)
check_err $?
- kci_test_ipsec_offload
+ (( count == 1 )) # just $addr3
check_err $?
- kci_test_fdb_get
+
+ ip address del dev "$devdummy" "$addr"
+ ip address del dev "$devdummy" "$addr2"
+ ip address del dev "$devdummy" "$addr3"
+
+ if [ $ret -ne 0 ]; then
+ end_test "FAIL: address proto $what"
+ return 1
+ fi
+ end_test "PASS: address proto $what"
+}
+
+kci_test_address_proto()
+{
+ local ret=0
+
+ do_test_address_proto IPv4 192.0.2.1/28
check_err $?
- kci_test_neigh_get
+
+ do_test_address_proto IPv6 2001:db8:1::1/64
check_err $?
+ return $ret
+}
+
+kci_test_enslave_bonding()
+{
+ local bond="bond123"
+ local ret=0
+
+ setup_ns testns
+ if [ $? -ne 0 ]; then
+ end_test "SKIP bonding tests: cannot add net namespace $testns"
+ return $ksft_skip
+ fi
+
+ run_cmd ip -netns $testns link add dev $bond type bond mode balance-rr
+ run_cmd ip -netns $testns link add dev $devdummy type dummy
+ run_cmd ip -netns $testns link set dev $devdummy up
+ run_cmd ip -netns $testns link set dev $devdummy master $bond down
+ if [ $ret -ne 0 ]; then
+ end_test "FAIL: initially up interface added to a bond and set down"
+ ip netns del "$testns"
+ return 1
+ fi
+
+ end_test "PASS: enslave interface in a bond"
+ ip netns del "$testns"
+}
+
+# Called to validate the addresses on $IFNAME:
+#
+# 1. Every `temporary` address must have a matching `mngtmpaddr`
+# 2. Every `mngtmpaddr` address must have some un`deprecated` `temporary`
+#
+# If the mngtmpaddr or tempaddr checking failed, return 0 and stop slowwait
+validate_mngtmpaddr()
+{
+ local dev=$1
+ local prefix=""
+ local addr_list=$(ip -j -n $testns addr show dev ${dev})
+ local temp_addrs=$(echo ${addr_list} | \
+ jq -r '.[].addr_info[] | select(.temporary == true) | .local')
+ local mng_prefixes=$(echo ${addr_list} | \
+ jq -r '.[].addr_info[] | select(.mngtmpaddr == true) | .local' | \
+ cut -d: -f1-4 | tr '\n' ' ')
+ local undep_prefixes=$(echo ${addr_list} | \
+ jq -r '.[].addr_info[] | select(.temporary == true and .deprecated != true) | .local' | \
+ cut -d: -f1-4 | tr '\n' ' ')
+
+ # 1. All temporary addresses (temp and dep) must have a matching mngtmpaddr
+ for address in ${temp_addrs}; do
+ prefix=$(echo ${address} | cut -d: -f1-4)
+ if [[ ! " ${mng_prefixes} " =~ " $prefix " ]]; then
+ check_err 1 "FAIL: Temporary $address with no matching mngtmpaddr!";
+ return 0
+ fi
+ done
+
+ # 2. All mngtmpaddr addresses must have a temporary address (not dep)
+ for prefix in ${mng_prefixes}; do
+ if [[ ! " ${undep_prefixes} " =~ " $prefix " ]]; then
+ check_err 1 "FAIL: No undeprecated temporary in $prefix!";
+ return 0
+ fi
+ done
+
+ return 1
+}
+
+kci_test_mngtmpaddr()
+{
+ local ret=0
+
+ setup_ns testns
+ if [ $? -ne 0 ]; then
+ end_test "SKIP mngtmpaddr tests: cannot add net namespace $testns"
+ return $ksft_skip
+ fi
+
+ # 1. Create a dummy Ethernet interface
+ run_cmd ip -n $testns link add ${devdummy} type dummy
+ run_cmd ip -n $testns link set ${devdummy} up
+ run_cmd ip netns exec $testns sysctl -w net.ipv6.conf.${devdummy}.use_tempaddr=1
+ run_cmd ip netns exec $testns sysctl -w net.ipv6.conf.${devdummy}.temp_prefered_lft=10
+ run_cmd ip netns exec $testns sysctl -w net.ipv6.conf.${devdummy}.temp_valid_lft=25
+ run_cmd ip netns exec $testns sysctl -w net.ipv6.conf.${devdummy}.max_desync_factor=1
+
+ # 2. Create several mngtmpaddr addresses on that interface.
+ # with temp_*_lft configured to be pretty short (10 and 35 seconds
+ # for prefer/valid respectively)
+ for i in $(seq 1 9); do
+ run_cmd ip -n $testns addr add 2001:db8:7e57:${i}::1/64 mngtmpaddr dev ${devdummy}
+ done
+
+ # 3. Confirm that a preferred temporary address exists for each mngtmpaddr
+ # address at all times, polling once per second for 30 seconds.
+ slowwait 30 validate_mngtmpaddr ${devdummy}
+
+ # 4. Delete each mngtmpaddr address, one at a time (alternating between
+ # deleting and merely un-mngtmpaddr-ing), and confirm that the other
+ # mngtmpaddr addresses still have preferred temporaries.
+ for i in $(seq 1 9); do
+ (( $i % 4 == 0 )) && mng_flag="mngtmpaddr" || mng_flag=""
+ if (( $i % 2 == 0 )); then
+ run_cmd ip -n $testns addr del 2001:db8:7e57:${i}::1/64 $mng_flag dev ${devdummy}
+ else
+ run_cmd ip -n $testns addr change 2001:db8:7e57:${i}::1/64 dev ${devdummy}
+ fi
+ # the temp addr should be deleted
+ validate_mngtmpaddr ${devdummy}
+ done
+
+ if [ $ret -ne 0 ]; then
+ end_test "FAIL: mngtmpaddr add/remove incorrect"
+ else
+ end_test "PASS: mngtmpaddr add/remove correctly"
+ fi
+
+ ip netns del "$testns"
+ return $ret
+}
+
+kci_test_rtnl()
+{
+ local current_test
+ local ret=0
+
+ kci_add_dummy
+ if [ $ret -ne 0 ];then
+ end_test "FAIL: cannot add dummy interface"
+ return 1
+ fi
+
+ for current_test in ${TESTS:-$ALL_TESTS}; do
+ $current_test
+ check_err $?
+ done
+
kci_del_dummy
return $ret
}
+usage()
+{
+ cat <<EOF
+usage: ${0##*/} OPTS
+
+ -t <test> Test(s) to run (default: all)
+ (options: $(echo $ALL_TESTS))
+ -v Verbose mode (show commands and output)
+ -P Pause after every test
+ -p Pause after every failing test before cleanup (for debugging)
+EOF
+}
+
#check for needed privileges
if [ "$(id -u)" -ne 0 ];then
- echo "SKIP: Need root privileges"
+ end_test "SKIP: Need root privileges"
exit $ksft_skip
fi
for x in ip tc;do
$x -Version 2>/dev/null >/dev/null
if [ $? -ne 0 ];then
- echo "SKIP: Could not run test without the $x tool"
+ end_test "SKIP: Could not run test without the $x tool"
exit $ksft_skip
fi
done
+while getopts t:hvpP o; do
+ case $o in
+ t) TESTS=$OPTARG;;
+ v) VERBOSE=1;;
+ p) PAUSE_ON_FAIL=yes;;
+ P) PAUSE=yes;;
+ h) usage; exit 0;;
+ *) usage; exit 1;;
+ esac
+done
+
+[ $PAUSE = "yes" ] && PAUSE_ON_FAIL="no"
+
kci_test_rtnl
exit $?
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.