diff options
Diffstat (limited to 'tools/testing/selftests/sysctl/sysctl.sh')
-rwxr-xr-x | tools/testing/selftests/sysctl/sysctl.sh | 270 |
1 files changed, 184 insertions, 86 deletions
diff --git a/tools/testing/selftests/sysctl/sysctl.sh b/tools/testing/selftests/sysctl/sysctl.sh index 19515dcb7d04..84472b436c07 100755 --- a/tools/testing/selftests/sysctl/sysctl.sh +++ b/tools/testing/selftests/sysctl/sysctl.sh @@ -1,16 +1,6 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0-or-later OR copyleft-next-0.3.1 # Copyright (C) 2017 Luis R. Rodriguez <mcgrof@kernel.org> -# -# This program is free software; you can redistribute it and/or modify it -# under the terms of the GNU General Public License as published by the Free -# Software Foundation; either version 2 of the License, or at your option any -# later version; or, when distributed separately from the Linux kernel or -# when incorporated into other software packages, subject to the following -# license: -# -# This program is free software; you can redistribute it and/or modify it -# under the terms of copyleft-next (version 0.3.1 or later) as published -# at http://copyleft-next.org/. # This performs a series tests against the proc sysctl interface. @@ -24,22 +14,28 @@ TEST_FILE=$(mktemp) # This represents # -# TEST_ID:TEST_COUNT:ENABLED:TARGET +# TEST_ID:TEST_COUNT:ENABLED:TARGET:SKIP_NO_TARGET # # TEST_ID: is the test id number # TEST_COUNT: number of times we should run the test # ENABLED: 1 if enabled, 0 otherwise # TARGET: test target file required on the test_sysctl module +# SKIP_NO_TARGET: 1 skip if TARGET not there +# 0 run eventhough TARGET not there # # Once these are enabled please leave them as-is. Write your own test, # we have tons of space. -ALL_TESTS="0001:1:1:int_0001" -ALL_TESTS="$ALL_TESTS 0002:1:1:string_0001" -ALL_TESTS="$ALL_TESTS 0003:1:1:int_0002" -ALL_TESTS="$ALL_TESTS 0004:1:1:uint_0001" -ALL_TESTS="$ALL_TESTS 0005:3:1:int_0003" -ALL_TESTS="$ALL_TESTS 0006:50:1:bitmap_0001" -ALL_TESTS="$ALL_TESTS 0007:1:1:boot_int" +ALL_TESTS="0001:1:1:int_0001:1" +ALL_TESTS="$ALL_TESTS 0002:1:1:string_0001:1" +ALL_TESTS="$ALL_TESTS 0003:1:1:int_0002:1" +ALL_TESTS="$ALL_TESTS 0004:1:1:uint_0001:1" +ALL_TESTS="$ALL_TESTS 0005:3:1:int_0003:1" +ALL_TESTS="$ALL_TESTS 0006:50:1:bitmap_0001:1" +ALL_TESTS="$ALL_TESTS 0007:1:1:boot_int:1" +ALL_TESTS="$ALL_TESTS 0008:1:1:match_int:1" +ALL_TESTS="$ALL_TESTS 0009:1:1:unregister_error:0" +ALL_TESTS="$ALL_TESTS 0010:1:1:mnt/mnt_error:0" +ALL_TESTS="$ALL_TESTS 0011:1:1:empty_add:0" function allow_user_defaults() { @@ -68,7 +64,7 @@ function check_production_sysctl_writes_strict() else old_strict=$(cat ${WRITES_STRICT}) if [ "$old_strict" = "1" ]; then - echo "ok" + echo "OK" else echo "FAIL, strict value is 0 but force to 1 to continue" >&2 echo "1" > ${WRITES_STRICT} @@ -230,7 +226,7 @@ run_numerictests() echo "FAIL" >&2 exit 1 else - echo "ok" + echo "OK" fi echo -n "Checking sysctl is not set to test value ... " @@ -238,7 +234,7 @@ run_numerictests() echo "FAIL" >&2 exit 1 else - echo "ok" + echo "OK" fi echo -n "Writing sysctl from shell ... " @@ -247,7 +243,7 @@ run_numerictests() echo "FAIL" >&2 exit 1 else - echo "ok" + echo "OK" fi echo -n "Resetting sysctl to original value ... " @@ -256,7 +252,7 @@ run_numerictests() echo "FAIL" >&2 exit 1 else - echo "ok" + echo "OK" fi # Now that we've validated the sanity of "set_test" and "set_orig", @@ -270,7 +266,7 @@ run_numerictests() echo "FAIL" >&2 rc=1 else - echo "ok" + echo "OK" fi echo -n "Writing middle of sysctl after synchronized seek ... " @@ -280,7 +276,7 @@ run_numerictests() echo "FAIL" >&2 rc=1 else - echo "ok" + echo "OK" fi echo -n "Writing beyond end of sysctl ... " @@ -290,7 +286,7 @@ run_numerictests() echo "FAIL" >&2 rc=1 else - echo "ok" + echo "OK" fi echo -n "Writing sysctl with multiple long writes ... " @@ -301,14 +297,14 @@ run_numerictests() echo "FAIL" >&2 rc=1 else - echo "ok" + echo "OK" fi test_rc } check_failure() { - echo -n "Testing that $1 fails as expected..." + echo -n "Testing that $1 fails as expected ... " reset_vals TEST_STR="$1" orig="$(cat $TARGET)" @@ -319,7 +315,7 @@ check_failure() echo "FAIL" >&2 rc=1 else - echo "ok" + echo "OK" fi test_rc } @@ -361,7 +357,7 @@ run_wideint_tests() # Your test must accept digits 3 and 4 to use this run_limit_digit() { - echo -n "Checking ignoring spaces up to PAGE_SIZE works on write ..." + echo -n "Checking ignoring spaces up to PAGE_SIZE works on write ... " reset_vals LIMIT=$((MAX_DIGITS -1)) @@ -373,11 +369,11 @@ run_limit_digit() echo "FAIL" >&2 rc=1 else - echo "ok" + echo "OK" fi test_rc - echo -n "Checking passing PAGE_SIZE of spaces fails on write ..." + echo -n "Checking passing PAGE_SIZE of spaces fails on write ... " reset_vals LIMIT=$((MAX_DIGITS)) @@ -389,7 +385,7 @@ run_limit_digit() echo "FAIL" >&2 rc=1 else - echo "ok" + echo "OK" fi test_rc } @@ -397,7 +393,7 @@ run_limit_digit() # You are using an int run_limit_digit_int() { - echo -n "Testing INT_MAX works ..." + echo -n "Testing INT_MAX works ... " reset_vals TEST_STR="$INT_MAX" echo -n $TEST_STR > $TARGET @@ -406,11 +402,11 @@ run_limit_digit_int() echo "FAIL" >&2 rc=1 else - echo "ok" + echo "OK" fi test_rc - echo -n "Testing INT_MAX + 1 will fail as expected..." + echo -n "Testing INT_MAX + 1 will fail as expected ... " reset_vals let TEST_STR=$INT_MAX+1 echo -n $TEST_STR > $TARGET 2> /dev/null @@ -419,11 +415,11 @@ run_limit_digit_int() echo "FAIL" >&2 rc=1 else - echo "ok" + echo "OK" fi test_rc - echo -n "Testing negative values will work as expected..." + echo -n "Testing negative values will work as expected ... " reset_vals TEST_STR="-3" echo -n $TEST_STR > $TARGET 2> /dev/null @@ -431,7 +427,7 @@ run_limit_digit_int() echo "FAIL" >&2 rc=1 else - echo "ok" + echo "OK" fi test_rc } @@ -447,7 +443,7 @@ run_limit_digit_int_array() echo "FAIL" >&2 rc=1 else - echo "ok" + echo "OK" fi test_rc @@ -464,7 +460,7 @@ run_limit_digit_int_array() echo "FAIL" >&2 rc=1 else - echo "ok" + echo "OK" fi test_rc @@ -482,7 +478,7 @@ run_limit_digit_int_array() echo "FAIL" >&2 rc=1 else - echo "ok" + echo "OK" fi test_rc @@ -499,7 +495,7 @@ run_limit_digit_int_array() echo "FAIL" >&2 rc=1 else - echo "ok" + echo "OK" fi test_rc } @@ -507,7 +503,7 @@ run_limit_digit_int_array() # You are using an unsigned int run_limit_digit_uint() { - echo -n "Testing UINT_MAX works ..." + echo -n "Testing UINT_MAX works ... " reset_vals TEST_STR="$UINT_MAX" echo -n $TEST_STR > $TARGET @@ -516,11 +512,11 @@ run_limit_digit_uint() echo "FAIL" >&2 rc=1 else - echo "ok" + echo "OK" fi test_rc - echo -n "Testing UINT_MAX + 1 will fail as expected..." + echo -n "Testing UINT_MAX + 1 will fail as expected ... " reset_vals TEST_STR=$(($UINT_MAX+1)) echo -n $TEST_STR > $TARGET 2> /dev/null @@ -529,11 +525,11 @@ run_limit_digit_uint() echo "FAIL" >&2 rc=1 else - echo "ok" + echo "OK" fi test_rc - echo -n "Testing negative values will not work as expected ..." + echo -n "Testing negative values will not work as expected ... " reset_vals TEST_STR="-3" echo -n $TEST_STR > $TARGET 2> /dev/null @@ -542,7 +538,7 @@ run_limit_digit_uint() echo "FAIL" >&2 rc=1 else - echo "ok" + echo "OK" fi test_rc } @@ -556,7 +552,7 @@ run_stringtests() echo "FAIL" >&2 rc=1 else - echo "ok" + echo "OK" fi echo -n "Writing middle of sysctl after unsynchronized seek ... " @@ -566,7 +562,7 @@ run_stringtests() echo "FAIL" >&2 rc=1 else - echo "ok" + echo "OK" fi echo -n "Checking sysctl maxlen is at least $MAXLEN ... " @@ -577,7 +573,7 @@ run_stringtests() echo "FAIL" >&2 rc=1 else - echo "ok" + echo "OK" fi echo -n "Checking sysctl keeps original string on overflow append ... " @@ -588,7 +584,7 @@ run_stringtests() echo "FAIL" >&2 rc=1 else - echo "ok" + echo "OK" fi echo -n "Checking sysctl stays NULL terminated on write ... " @@ -599,7 +595,7 @@ run_stringtests() echo "FAIL" >&2 rc=1 else - echo "ok" + echo "OK" fi echo -n "Checking sysctl stays NULL terminated on overwrite ... " @@ -610,7 +606,7 @@ run_stringtests() echo "FAIL" >&2 rc=1 else - echo "ok" + echo "OK" fi test_rc @@ -622,7 +618,6 @@ target_exists() TEST_ID="$2" if [ ! -f ${TARGET} ] ; then - echo "Target for test $TEST_ID: $TARGET not exist, skipping test ..." return 0 fi return 1 @@ -656,7 +651,7 @@ run_bitmaptest() { fi done - echo -n "Checking bitmap handler... " + echo -n "Checking bitmap handler ... " TEST_FILE=$(mktemp) echo -n "$TEST_STR" > $TEST_FILE @@ -671,7 +666,7 @@ run_bitmaptest() { echo "FAIL" >&2 rc=1 else - echo "ok" + echo "OK" rc=0 fi test_rc @@ -739,7 +734,7 @@ sysctl_test_0005() sysctl_test_0006() { - TARGET="${SYSCTL}/bitmap_0001" + TARGET="${SYSCTL}/$(get_test_target 0006)" reset_vals ORIG="" run_bitmaptest @@ -747,44 +742,115 @@ sysctl_test_0006() sysctl_test_0007() { - TARGET="${SYSCTL}/boot_int" + TARGET="${SYSCTL}/$(get_test_target 0007)" + echo -n "Testing if $TARGET is set to 1 ... " + if [ ! -f $TARGET ]; then - echo "Skipping test for $TARGET as it is not present ..." + echo -e "SKIPPING\n$TARGET is not present" return $ksft_skip fi if [ -d $DIR ]; then - echo "Boot param test only possible sysctl_test is built-in, not module:" + echo -e "SKIPPING\nTest only possible if sysctl_test is built-in, not module:" cat $TEST_DIR/config >&2 return $ksft_skip fi - echo -n "Testing if $TARGET is set to 1 ..." ORIG=$(cat "${TARGET}") if [ x$ORIG = "x1" ]; then - echo "ok" + echo "OK" return 0 fi - echo "FAIL" - echo "Checking if /proc/cmdline contains setting of the expected parameter ..." + if [ ! -f /proc/cmdline ]; then - echo "/proc/cmdline does not exist, test inconclusive" - return 0 + echo -e "SKIPPING\nThere is no /proc/cmdline to check for paramter" + return $ksft_skip fi FOUND=$(grep -c "sysctl[./]debug[./]test_sysctl[./]boot_int=1" /proc/cmdline) if [ $FOUND = "1" ]; then - echo "Kernel param found but $TARGET is not 1, TEST FAILED" + echo -e "FAIL\nKernel param found but $TARGET is not 1." >&2 rc=1 test_rc fi - echo "Skipping test, expected kernel parameter missing." - echo "To perform this test, make sure kernel is booted with parameter: sysctl.debug.test_sysctl.boot_int=1" + echo -e "SKIPPING\nExpected kernel parameter missing." + echo "Kernel must be booted with parameter: sysctl.debug.test_sysctl.boot_int=1" return $ksft_skip } +sysctl_test_0008() +{ + TARGET="${SYSCTL}/$(get_test_target 0008)" + echo -n "Testing if $TARGET is matched in kernel ... " + + if [ ! -f $TARGET ]; then + echo -e "SKIPPING\n$TARGET is not present" + return $ksft_skip + fi + + ORIG_VALUE=$(cat "${TARGET}") + + if [ $ORIG_VALUE -ne 1 ]; then + echo "FAIL" >&2 + rc=1 + test_rc + fi + + echo "OK" + return 0 +} + +sysctl_test_0009() +{ + TARGET="${SYSCTL}/$(get_test_target 0009)" + echo -n "Testing if $TARGET unregistered correctly ... " + if [ -d $TARGET ]; then + echo "FAIL" >&2 + rc=1 + test_rc + fi + + echo "OK" + return 0 +} + +sysctl_test_0010() +{ + TARGET="${SYSCTL}/$(get_test_target 0010)" + echo -n "Testing that $TARGET was not created ... " + if [ -d $TARGET ]; then + echo "FAIL" >&2 + rc=1 + test_rc + fi + + echo "OK" + return 0 +} + +sysctl_test_0011() +{ + TARGET="${SYSCTL}/$(get_test_target 0011)" + echo -n "Testing empty dir handling in ${TARGET} ... " + if [ ! -d ${TARGET} ]; then + echo -e "FAIL\nCould not create ${TARGET}" >&2 + rc=1 + test_rc + fi + + TARGET2="${TARGET}/empty" + if [ ! -d ${TARGET2} ]; then + echo -e "FAIL\nCould not create ${TARGET2}" >&2 + rc=1 + test_rc + fi + + echo "OK" + return 0 +} + list_tests() { echo "Test ID list:" @@ -800,6 +866,10 @@ list_tests() echo "0005 x $(get_test_count 0005) - tests proc_douintvec() array" echo "0006 x $(get_test_count 0006) - tests proc_do_large_bitmap()" echo "0007 x $(get_test_count 0007) - tests setting sysctl from kernel boot param" + echo "0008 x $(get_test_count 0008) - tests sysctl macro values match" + echo "0009 x $(get_test_count 0009) - tests sysct unregister" + echo "0010 x $(get_test_count 0010) - tests sysct mount point" + echo "0011 x $(get_test_count 0011) - tests empty directories" } usage() @@ -844,38 +914,65 @@ function test_num() usage fi } +function remove_leading_zeros() +{ + echo $1 | sed 's/^0*//' +} function get_test_count() { test_num $1 - TEST_DATA=$(echo $ALL_TESTS | awk '{print $'$1'}') + awk_field=$(remove_leading_zeros $1) + TEST_DATA=$(echo $ALL_TESTS | awk '{print $'$awk_field'}') echo ${TEST_DATA} | awk -F":" '{print $2}' } function get_test_enabled() { test_num $1 - TEST_DATA=$(echo $ALL_TESTS | awk '{print $'$1'}') + awk_field=$(remove_leading_zeros $1) + TEST_DATA=$(echo $ALL_TESTS | awk '{print $'$awk_field'}') echo ${TEST_DATA} | awk -F":" '{print $3}' } function get_test_target() { test_num $1 - TEST_DATA=$(echo $ALL_TESTS | awk '{print $'$1'}') + awk_field=$(remove_leading_zeros $1) + TEST_DATA=$(echo $ALL_TESTS | awk '{print $'$awk_field'}') echo ${TEST_DATA} | awk -F":" '{print $4}' } +function get_test_skip_no_target() +{ + test_num $1 + awk_field=$(remove_leading_zeros $1) + TEST_DATA=$(echo $ALL_TESTS | awk '{print $'$awk_field'}') + echo ${TEST_DATA} | awk -F":" '{print $5}' +} + +function skip_test() +{ + TEST_ID=$1 + TEST_TARGET=$2 + if target_exists $TEST_TARGET $TEST_ID; then + TEST_SKIP=$(get_test_skip_no_target $TEST_ID) + if [[ $TEST_SKIP -eq "1" ]]; then + echo "Target $TEST_TARGET for test $TEST_ID does not exist ... SKIPPING" + return 0 + fi + fi + return 1 +} + function run_all_tests() { for i in $ALL_TESTS ; do - TEST_ID=${i%:*:*:*} + TEST_ID=${i%:*:*:*:*} ENABLED=$(get_test_enabled $TEST_ID) TEST_COUNT=$(get_test_count $TEST_ID) TEST_TARGET=$(get_test_target $TEST_ID) - if target_exists $TEST_TARGET $TEST_ID; then - continue - fi + if [[ $ENABLED -eq "1" ]]; then test_case $TEST_ID $TEST_COUNT $TEST_TARGET fi @@ -910,18 +1007,19 @@ function watch_case() function test_case() { + TEST_ID=$1 NUM_TESTS=$2 + TARGET=$3 - i=0 - - if target_exists $3 $1; then - continue + if skip_test $TEST_ID $TARGET; then + return fi + i=0 while [ $i -lt $NUM_TESTS ]; do - test_num $1 - watch_log $i ${TEST_NAME}_test_$1 noclear - RUN_TEST=${TEST_NAME}_test_$1 + test_num $TEST_ID + watch_log $i ${TEST_NAME}_test_${TEST_ID} noclear + RUN_TEST=${TEST_NAME}_test_${TEST_ID} $RUN_TEST let i=$i+1 done |