| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
4d4c10f763d7 ("PCI: Explicitly put devices into D0 when initializing")
intended to put PCI devices into D0, but in doing so unintentionally
changed runtime PM initialization not to occur on devices that don't
support PCI PM. This caused a regression in vfio-pci due to an imbalance
with its use.
Adjust the logic in pci_pm_init() so that even if PCI PM isn't supported
runtime PM is still initialized.
Fixes: 4d4c10f763d7 ("PCI: Explicitly put devices into D0 when initializing")
Reported-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Closes: https://lore.kernel.org/linux-pci/20250424043232.1848107-1-superm1@kernel.org/T/#m7e8929d6421690dc8bd6dc639d86c2b4db27cbc4
Reported-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Closes: https://lore.kernel.org/linux-pci/20250424043232.1848107-1-superm1@kernel.org/T/#m40d277dcdb9be64a1609a82412d1aa906263e201
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Tested-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Cc: Alex Williamson <alex.williamson@redhat.com>
Link: https://patch.msgid.link/20250611233117.61810-1-superm1@kernel.org
|
|
Merge cpuidle updates for 6.16-rc2:
- Update data types of variables passed as arguments to
mwait_idle_with_hints() to match the function definition
after recent changes (Uros Bizjak).
- Eliminate mwait_play_dead_cpuid_hint() again after reverting its
elimination during the merge window due to a problem with handling
"dead" SMT siblings, but this time prevent leaving them in C1 after
initialization by taking them online and back offline when a proper
cpuidle driver for the platform has been registered (Rafael Wysocki).
* pm-cpuidle:
intel_idle: Update arguments of mwait_idle_with_hints()
Reapply "x86/smp: Eliminate mwait_play_dead_cpuid_hint()"
ACPI: processor: Rescan "dead" SMT siblings during initialization
intel_idle: Rescan "dead" SMT siblings during initialization
x86/smp: PM/hibernate: Split arch_resume_nosmt()
intel_idle: Use subsys_initcall_sync() for initialization
|
|
Merge a cpupower utility fix for 6.16-rc2 that unbreaks systemd service
units installation on some sysems (Francesco Poli).
* pm-tools:
cpupower: split unitdir from libdir in Makefile
|
|
Pull spi fixes from Mark Brown:
"A collection of driver specific fixes, most minor apart from the OMAP
ones which disable some recent performance optimisations in some
non-standard cases where we could start driving the bus incorrectly.
The change to the stm32-ospi driver to use the newer reset APIs is a
fix for interactions with other IP sharing the same reset line in some
SoCs"
* tag 'spi-fix-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-pci1xxxx: Drop MSI-X usage as unsupported by DMA engine
spi: stm32-ospi: clean up on error in probe()
spi: stm32-ospi: Make usage of reset_control_acquire/release() API
spi: offload: check offload ops existence before disabling the trigger
spi: spi-pci1xxxx: Fix error code in probe
spi: loongson: Fix build warnings about export.h
spi: omap2-mcspi: Disable multi-mode when the previous message kept CS asserted
spi: omap2-mcspi: Disable multi mode when CS should be kept asserted after message
|
|
Pull regulator fix from Mark Brown:
"One minor fix for a leak in the DT parsing code in the max20086 driver"
* tag 'regulator-fix-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: max20086: Fix refcount leak in max20086_parse_regulators_dt()
|
|
If an exiting non-autoreaping task has already passed exit_notify() and
calls handle_posix_cpu_timers() from IRQ, it can be reaped by its parent
or debugger right after unlock_task_sighand().
If a concurrent posix_cpu_timer_del() runs at that moment, it won't be
able to detect timer->it.cpu.firing != 0: cpu_timer_task_rcu() and/or
lock_task_sighand() will fail.
Add the tsk->exit_state check into run_posix_cpu_timers() to fix this.
This fix is not needed if CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y, because
exit_task_work() is called before exit_notify(). But the check still
makes sense, task_work_add(&tsk->posix_cputimers_work.work) will fail
anyway in this case.
Cc: stable@vger.kernel.org
Reported-by: Benoît Sevens <bsevens@google.com>
Fixes: 0bdd2ed4138e ("sched: run_posix_cpu_timers: Don't check ->exit_state, use lock_task_sighand()")
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull tracing fix from Steven Rostedt:
- Do not free "head" variable in filter_free_subsystem_filters()
The first error path jumps to "free_now" label but first frees the
newly allocated "head" variable. But the "free_now" code checks this
variable, and if it is not NULL, it will iterate the list. As this
list variable was already initialized, the "free_now" code will not
do anything as it is empty. But freeing it will cause a UAF bug.
The error path should simply jump to the "free_now" label and leave
the "head" variable alone.
* tag 'trace-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Do not free "head" on error path of filter_free_subsystem_filters()
|
|
Make the internal microphone work on HP Victus laptops.
Signed-off-by: Raven Black <ravenblack@gmail.com>
Link: https://patch.msgid.link/20250613-support-hp-victus-microphone-v1-1-bebc4c3a2041@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
Change the firmware filename format on SoundWire systems to
directly tie it to the physical amp it applies to. This is mainly
to decouple it from the ALSA prefix strings to avoid complications
when the SoundWire machine driver starts creating dailinks based on
SDCA Disco info instead of hardcoded match tables. It also avoids
errors from having to rename firmware files from a hardware-address
to a ALSA-prefix naming for Linux publication. There are already
published firmware files for the L56 B0 silicon so that has a fallback
scheme for backward compatibility which has been separated into its
own patch on top of the main change.
We'd like to get this into 6.16 so that the L63 support starts "clean"
with this new naming and we don't have to support one kernel version
with L63 using the old naming. Unfortunately we didn't manage to get
these patches through internal review and testing before the merge
window opened.
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Rework of system register accessors for system registers that are
directly writen to memory, so that sanitisation of the in-memory
value happens at the correct time (after the read, or before the
write). For convenience, RMW-style accessors are also provided.
- Multiple fixes for the so-called "arch-timer-edge-cases' selftest,
which was always broken.
x86:
- Make KVM_PRE_FAULT_MEMORY stricter for TDX, allowing userspace to
pass only the "untouched" addresses and flipping the shared/private
bit in the implementation.
- Disable SEV-SNP support on initialization failure
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86/mmu: Reject direct bits in gpa passed to KVM_PRE_FAULT_MEMORY
KVM: x86/mmu: Embed direct bits into gpa for KVM_PRE_FAULT_MEMORY
KVM: SEV: Disable SEV-SNP support on initialization failure
KVM: arm64: selftests: Determine effective counter width in arch_timer_edge_cases
KVM: arm64: selftests: Fix xVAL init in arch_timer_edge_cases
KVM: arm64: selftests: Fix thread migration in arch_timer_edge_cases
KVM: arm64: selftests: Fix help text for arch_timer_edge_cases
KVM: arm64: Make __vcpu_sys_reg() a pure rvalue operand
KVM: arm64: Don't use __vcpu_sys_reg() to get the address of a sysreg
KVM: arm64: Add RMW specific sysreg accessor
KVM: arm64: Add assignment-specific sysreg accessor
|
|
If peeking a bunch of buffers, normally io_ring_buffers_peek() will
truncate the end buffer. This isn't optimal as presumably more data will
be arriving later, and hence it's better to stop with the last full
buffer rather than truncate the end buffer.
Cc: stable@vger.kernel.org
Fixes: 35c8711c8fc4 ("io_uring/kbuf: add helpers for getting/peeking multiple buffers")
Reported-by: Christian Mazakas <christian.mazakas@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull crypto fix from Herbert Xu:
"Fix a broken self-test in hkdf (new regression)"
* tag 'v6.16-p4' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: hkdf - move to late_initcall
|
|
Pull bcachefs fixes from Kent Overstreet:
"As usual, highlighting the ones users have been noticing:
- Fix a small issue with has_case_insensitive not being propagated on
snapshot creation; this led to fsck errors, which we're harmless
because we're not using this flag yet (it's for overlayfs +
casefolding).
- Log the error being corrected in the journal when we're doing fsck
repair: this was one of the "lessons learned" from the i_nlink 0 ->
subvolume deletion bug, where reconstructing what had happened by
analyzing the journal was a bit more difficult than it needed to
be.
- Don't schedule btree node scan to run in the superblock: this fixes
a regression from the 6.16 recovery passes rework, and let to it
running unnecessarily.
The real issue here is that we don't have online, "self healing"
style topology repair yet: topology repair currently has to run
before we go RW, which means that we may schedule it unnecessarily
after a transient error. This will be fixed in the future.
- We now track, in btree node flags, the reason it was scheduled to
be rewritten. We discovered a deadlock in recovery when many btree
nodes need to be rewritten because they're degraded: fully fixing
this will take some work but it's now easier to see what's going
on.
For the bug report where this came up, a device had been kicked RO
due to transient errors: manually setting it back to RW was
sufficient to allow recovery to succeed.
- Mark a few more fsck errors as autofix: as a reminder to users,
please do keep reporting cases where something needs to be repaired
and is not repaired automatically (i.e. cases where -o fix_errors
or fsck -y is required).
- rcu_pending.c now works with PREEMPT_RT
- 'bcachefs device add', then umount, then remount wasn't working -
we now emit a uevent so that the new device's new superblock is
correctly picked up
- Assorted repair fixes: btree node scan will no longer incorrectly
update sb->version_min,
- Assorted syzbot fixes"
* tag 'bcachefs-2025-06-12' of git://evilpiepirate.org/bcachefs: (23 commits)
bcachefs: Don't trace should_be_locked unless changing
bcachefs: Ensure that snapshot creation propagates has_case_insensitive
bcachefs: Print devices we're mounting on multi device filesystems
bcachefs: Don't trust sb->nr_devices in members_to_text()
bcachefs: Fix version checks in validate_bset()
bcachefs: ioctl: avoid stack overflow warning
bcachefs: Don't pass trans to fsck_err() in gc_accounting_done
bcachefs: Fix leak in bch2_fs_recovery() error path
bcachefs: Fix rcu_pending for PREEMPT_RT
bcachefs: Fix downgrade_table_extra()
bcachefs: Don't put rhashtable on stack
bcachefs: Make sure opts.read_only gets propagated back to VFS
bcachefs: Fix possible console lock involved deadlock
bcachefs: mark more errors autofix
bcachefs: Don't persistently run scan_for_btree_nodes
bcachefs: Read error message now prints if self healing
bcachefs: Only run 'increase_depth' for keys from btree node csan
bcachefs: Mark need_discard_freespace_key_bad autofix
bcachefs: Update /dev/disk/by-uuid on device add
bcachefs: Add more flags to btree nodes for rewrite reason
...
|
|
Since termio interface is now obsolete, include/uapi/asm/ioctls.h
has some constant macros referring to "struct termio", this caused
build failure at userspace.
In file included from /usr/include/asm/ioctl.h:12,
from /usr/include/asm/ioctls.h:5,
from tst-ioctls.c:3:
tst-ioctls.c: In function 'get_TCGETA':
tst-ioctls.c:12:10: error: invalid application of 'sizeof' to incomplete type 'struct termio'
12 | return TCGETA;
| ^~~~~~
Even though termios.h provides "struct termio", trying to juggle definitions around to
make it compile could introduce regressions. So better to open code it.
Reported-by: Tulio Magno <tuliom@ascii.art.br>
Suggested-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Justin M. Forbes <jforbes@fedoraproject.org>
Reviewed-by: Michael Ellerman <mpe@ellerman.id.au>
Closes: https://lore.kernel.org/linuxppc-dev/8734dji5wl.fsf@ascii.art.br/
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250517142237.156665-1-maddy@linux.ibm.com
|
|
The DMA memory for this driver is allocated using dma_alloc_coherent(),
which ends up mapping the allocated memory as uncached. Performing the
various dma_sync_*() operations on this memory causes issues during SPI
flashing:
[ 7.818017] pc : dcache_inval_poc+0x40/0x58
[ 7.822128] lr : arch_sync_dma_for_cpu+0x2c/0x4c
[ 7.826854] sp : ffff80008193bcf0
[ 7.830267] x29: ffff80008193bcf0 x28: ffffa3fe5ff1e908 x27: ffffa3fe627bb130
[ 7.837528] x26: ffff000086952180 x25: ffff00008015c8ac x24: ffff000086c9b480
[ 7.844878] x23: ffff00008015c800 x22: 0000000000000002 x21: 0000000000010000
[ 7.852229] x20: 0000000106dae000 x19: ffff000080112410 x18: 0000000000000001
[ 7.859580] x17: ffff000080159400 x16: ffffa3fe607a9bd8 x15: ffff0000eac1b180
[ 7.866753] x14: 000000000000000c x13: 0000000000000001 x12: 000000000000025a
[ 7.874104] x11: 0000000000000000 x10: 7f73e96357f6a07f x9 : db1fc8072a7f5e3a
[ 7.881365] x8 : ffff000086c9c588 x7 : ffffa3fe607a9bd8 x6 : ffff80008193bc28
[ 7.888630] x5 : 000000000000ffff x4 : 0000000000000009 x3 : 000000000000003f
[ 7.895892] x2 : 0000000000000040 x1 : ffff000086dbe000 x0 : ffff000086db0000
[ 7.903155] Call trace:
[ 7.905606] dcache_inval_poc+0x40/0x58 (P)
[ 7.909804] iommu_dma_sync_single_for_cpu+0xb4/0xb8
[ 7.914617] __dma_sync_single_for_cpu+0x158/0x194
[ 7.919428] __this_module+0x5b020/0x5baf8 [spi_tegra210_quad]
[ 7.925291] irq_thread_fn+0x2c/0xc0
[ 7.928966] irq_thread+0x16c/0x318
[ 7.932467] kthread+0x12c/0x214
Fix this by removing all calls to the dma_sync_*() functions. This isn't
ideal because DMA is used only for relatively large (> 64 words or 256
bytes) and using uncached memory for this might be slow. Reworking this
to use cached memory for faster access and reintroducing the cache
maintenance calls is probably worth a follow-up patch.
Reported-by: Brad Griffis <bgriffis@nvidia.com>
Fixes: 017f1b0bae08 ("spi: tegra210-quad: Add support for internal DMA")
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20250613123037.2082788-1-thierry.reding@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Stephen Rothwell reports htmldocs warning on ublk docs:
Documentation/block/ublk.rst:414: ERROR: Unexpected indentation. [docutils]
Fix the warning by separating sublists of auto buffer registration
fallback behavior from their appropriate parent list item.
Fixes: ff20c516485e ("ublk: document auto buffer registration(UBLK_F_AUTO_BUF_REG)")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-next/20250612132638.193de386@canb.auug.org.au/
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20250613023857.15971-1-bagasdotme@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This driver uses a mixture of ways to get the size of a PTE,
tegra_smmu_set_pde() did it as sizeof(*pd) which became wrong when pd
switched to a struct tegra_pd.
Switch pd back to a u32* in tegra_smmu_set_pde() so the sizeof(*pd)
returns 4.
Fixes: 50568f87d1e2 ("iommu/terga: Do not use struct page as the handle for as->pd memory")
Reported-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Closes: https://lore.kernel.org/all/62e7f7fe-6200-4e4f-ad42-d58ad272baa6@tecnico.ulisboa.pt/
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Tested-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Link: https://lore.kernel.org/r/0-v1-da7b8b3d57eb+ce-iommu_terga_sizeof_jgg@nvidia.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
GSP message queue docs has been moved following RPC handling split in
commit 8a8b1ec5261f20 ("drm/nouveau/gsp: split rpc handling out on its
own"), before GSP-RM implementation is versioned in commit c472d828348caf
("drm/nouveau/gsp: move subdev/engine impls to subdev/gsp/rm/r535/").
However, the kernel-doc reference in nouveau docs is left behind, which
triggers htmldocs warnings:
ERROR: Cannot find file ./drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c
WARNING: No kernel-doc for file ./drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c
Update the reference.
Fixes: c472d828348c ("drm/nouveau/gsp: move subdev/engine impls to subdev/gsp/rm/r535/")
Fixes: 8a8b1ec5261f ("drm/nouveau/gsp: split rpc handling out on its own")
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20250611020805.22418-2-bagasdotme@gmail.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
The nouveau_get_backlight_name() function generates a unique name for the
backlight interface, appending an id from 1 to 99 for all backlight devices
after the first.
GCC 15 (and likely other compilers) produce the following
-Wformat-truncation warning:
nouveau_backlight.c: In function ‘nouveau_backlight_init’:
nouveau_backlight.c:56:69: error: ‘%d’ directive output may be truncated writing between 1 and 10 bytes into a region of size 3 [-Werror=format-truncation=]
56 | snprintf(backlight_name, BL_NAME_SIZE, "nv_backlight%d", nb);
| ^~
In function ‘nouveau_get_backlight_name’,
inlined from ‘nouveau_backlight_init’ at nouveau_backlight.c:351:7:
nouveau_backlight.c:56:56: note: directive argument in the range [1, 2147483647]
56 | snprintf(backlight_name, BL_NAME_SIZE, "nv_backlight%d", nb);
| ^~~~~~~~~~~~~~~~
nouveau_backlight.c:56:17: note: ‘snprintf’ output between 14 and 23 bytes into a destination of size 15
56 | snprintf(backlight_name, BL_NAME_SIZE, "nv_backlight%d", nb);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The warning started appearing after commit ab244be47a8f ("drm/nouveau:
Fix a potential theorical leak in nouveau_get_backlight_name()") This fix
for the ida usage removed the explicit value check for ids larger than 99.
The compiler is unable to intuit that the ida_alloc_max() limits the
returned value range between 0 and 99.
Because the compiler can no longer infer that the number ranges from 0 to
99, it thinks that it could use as many as 11 digits (10 + the potential -
sign for negative numbers).
The warning has gone unfixed for some time, with at least one kernel test
robot report. The code breaks W=1 builds, which is especially frustrating
with the introduction of CONFIG_WERROR.
The string is stored temporarily on the stack and then copied into the
device name. Its not a big deal to use 11 more bytes of stack rounding out
to an even 24 bytes. Increase BL_NAME_SIZE to 24 to avoid the truncation
warning. This fixes the W=1 builds that include this driver.
Compile tested only.
Fixes: ab244be47a8f ("drm/nouveau: Fix a potential theorical leak in nouveau_get_backlight_name()")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312050324.0kv4PnfZ-lkp@intel.com/
Suggested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20250610-jk-nouveua-drm-bl-snprintf-fix-v2-1-7fdd4b84b48e@intel.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
The RPC container is released after being passed to r535_gsp_rpc_send().
When sending the initial fragment of a large RPC and passing the
caller's RPC container, the container will be freed prematurely. Subsequent
attempts to send remaining fragments will therefore result in a
use-after-free.
Allocate a temporary RPC container for holding the initial fragment of a
large RPC when sending. Free the caller's container when all fragments
are successfully sent.
Fixes: 176fdcbddfd2 ("drm/nouveau/gsp/r535: add support for booting GSP-RM")
Signed-off-by: Zhi Wang <zhiw@nvidia.com>
Link: https://lore.kernel.org/r/20250527163712.3444-1-zhiw@nvidia.com
[ Rebase onto Blackwell changes. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
The left shift int 32 bit integer constants 1 is evaluated using 32 bit
arithmetic and then assigned to a 64 bit unsigned integer. In the case
where the shift is 32 or more this can lead to an overflow. Avoid this
by shifting using the BIT_ULL macro instead.
Fixes: 6c3ac7bcfcff ("drm/nouveau/gsp: support deeper page tables in COPY_SERVER_RESERVED_PDES")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250522131512.2768310-1-colin.i.king@gmail.com
|
|
Initialize `ops` member's pointers properly by using kzalloc() instead of
kmalloc() when allocating the simulation work context. Otherwise the
pointers contain random content leading to invalid dereferencing.
Signed-off-by: Gyeyoung Baek <gye976@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250612124827.63259-1-gye976@gmail.com
|
|
Commit 788019eb559f ("genirq: Retain disable depth for managed interrupts
across CPU hotplug") tried to make managed shutdown/startup properly
reference counted, but it missed the fact that the unplug and hotplug code
has an intentional imbalance by skipping IRQS_SUSPENDED interrupts on
the "restore" path.
This means that if a managed-affinity interrupt was both suspended and
managed-shutdown (such as may happen during system suspend / S3), resume
skips calling irq_startup_managed(), and would again have an unbalanced
depth this time, with a positive value (i.e., remaining unexpectedly
masked).
This IRQS_SUSPENDED check was introduced in commit a60dd06af674
("genirq/cpuhotplug: Skip suspended interrupts when restoring affinity")
for essentially the same reason as commit 788019eb559f, to prevent that
irq_startup() would unconditionally re-enable an interrupt too early.
Because irq_startup_managed() now respsects the disable-depth count, the
IRQS_SUSPENDED check is not longer needed, and instead, it causes harm.
Thus, drop the IRQS_SUSPENDED check, and restore balance.
This effectively reverts commit a60dd06af674 ("genirq/cpuhotplug: Skip
suspended interrupts when restoring affinity"), because it is replaced
by commit 788019eb559f ("genirq: Retain disable depth for managed
interrupts across CPU hotplug").
Fixes: 788019eb559f ("genirq: Retain disable depth for managed interrupts across CPU hotplug")
Reported-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Link: https://lore.kernel.org/all/20250612183303.3433234-3-briannorris@chromium.org
Closes: https://lore.kernel.org/lkml/24ec4adc-7c80-49e9-93ee-19908a97ab84@gmail.com/
|
|
Commit 788019eb559f ("genirq: Retain disable depth for managed interrupts
across CPU hotplug") intended to only decrement the disable depth once per
managed shutdown, but instead it decrements for each CPU hotplug in the
affinity mask, until its depth reaches a point where it finally gets
re-started.
For example, consider:
1. Interrupt is affine to CPU {M,N}
2. disable_irq() -> depth is 1
3. CPU M goes offline -> interrupt migrates to CPU N / depth is still 1
4. CPU N goes offline -> irq_shutdown() / depth is 2
5. CPU N goes online
-> irq_restore_affinity_of_irq()
-> irqd_is_managed_and_shutdown()==true
-> irq_startup_managed() -> depth is 1
6. CPU M goes online
-> irq_restore_affinity_of_irq()
-> irqd_is_managed_and_shutdown()==true
-> irq_startup_managed() -> depth is 0
*** BUG: driver expects the interrupt is still disabled ***
-> irq_startup() -> irqd_clr_managed_shutdown()
7. enable_irq() -> depth underflow / unbalanced enable_irq() warning
This should clear the managed-shutdown flag at step 6, so that further
hotplugs don't cause further imbalance.
Note: It might be cleaner to also remove the irqd_clr_managed_shutdown()
invocation from __irq_startup_managed(). But this is currently not possible
because of irq_update_affinity_desc() as it sets IRQD_MANAGED_SHUTDOWN and
expects irq_startup() to clear it.
Fixes: 788019eb559f ("genirq: Retain disable depth for managed interrupts across CPU hotplug")
Reported-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Link: https://lore.kernel.org/all/20250612183303.3433234-2-briannorris@chromium.org
|
|
A user has bisected a regression which causes graphical corruptions on his
screen to commit 7627a0edef54 ("ata: ahci: Drop low power policy board
type").
Simply reverting commit 7627a0edef54 ("ata: ahci: Drop low power policy
board type") makes the graphical corruptions on his screen to go away.
(Note: there are no visible messages in dmesg that indicates a problem
with AHCI.)
The user also reports that the problem occurs regardless if there is an
HDD or an SSD connected via AHCI, so the problem is not device related.
The devices also work fine on other motherboards, so it seems specific to
the ASUSPRO-D840SA motherboard.
While enabling low power modes for AHCI is not supposed to affect
completely unrelated hardware, like a graphics card, it does however
allow the system to enter deeper PC-states, which could expose ACPI issues
that were previously not visible (because the system never entered these
lower power states before).
There are previous examples where enabling LPM exposed serious BIOS/ACPI
bugs, see e.g. commit 240630e61870 ("ahci: Disable LPM on Lenovo 50 series
laptops with a too old BIOS").
Since there hasn't been any BIOS update in years for the ASUSPRO-D840SA
motherboard, disable LPM for this board, in order to avoid entering lower
PC-states, which triggers graphical corruptions.
Cc: stable@vger.kernel.org
Reported-by: Andy Yang <andyybtc79@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220111
Fixes: 7627a0edef54 ("ata: ahci: Drop low power policy board type")
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250612141750.2108342-2-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
Similarly to 26064d3e2b4d ("block: fix adding folio to bio"), if
we attempt to add a folio that is larger than 4GB, we'll silently
truncate the offset and len. Widen the parameters to size_t, assert
that the length is less than 4GB and set the first page that contains
the interesting data rather than the first page of the folio.
Fixes: 26db5ee15851 (block: add a bvec_set_folio helper)
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20250612144255.2850278-1-willy@infradead.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It is possible for physically contiguous folios to have discontiguous
struct pages if SPARSEMEM is enabled and SPARSEMEM_VMEMMAP is not.
This is correctly handled by folio_page_idx(), so remove this open-coded
implementation.
Fixes: 640d1930bef4 (block: Add bio_for_each_folio_all())
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20250612144126.2849931-1-willy@infradead.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This reverts commit 5ff79cabb23a2f14d2ed29e9596aec908905a0e6.
Although the Alienware m16 R1 AMD model supports G-Mode, it actually has
a lower power ceiling than plain "performance" profile, which results in
lower performance.
Reported-by: Cihan Ozakca <cozakca@outlook.com>
Cc: stable@vger.kernel.org # 6.15.x
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250611-m16-rev-v1-1-72d13bad03c9@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Every other s2idle cycle fails to reach hardware sleep when keyboard
wakeup is enabled. This appears to be an EC bug, but the vendor
refuses to fix it.
It was confirmed that turning off i8042 wakeup avoids ths issue
(albeit keyboard wakeup is disabled). Take the lesser of two evils
and add it to the i8042 quirk list.
Reported-by: Raoul <ein4rth@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220116
Tested-by: Raoul <ein4rth@gmail.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250611203341.3733478-1-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Removes MSI-X from the interrupt request path, as the DMA engine used by
the SPI controller does not support MSI-X interrupts.
Signed-off-by: Thangaraj Samynathan <thangaraj.s@microchip.com>
Link: https://patch.msgid.link/20250612023059.71726-1-thangaraj.s@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When the first driver for Apple Silicon was upstreamed we accidentally
included `default ARCH_APPLE` in its Kconfig which then spread to almost
every subsequent driver. As soon as ARCH_APPLE is set to y this will
pull in many drivers as built-ins which is not what we want.
Thus, drop `default ARCH_APPLE` from Kconfig.
Signed-off-by: Sven Peter <sven@kernel.org>
Reviewed-by: Janne Grunau <j@jannau.net>
Link: https://patch.msgid.link/20250612-apple-kconfig-defconfig-v1-10-0e6f9cb512c1@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Commit 698de822780f ("crypto: testmgr - make it easier to enable the
full set of tests") removed support for building kernels that run only
the "fast" set of crypto self-tests by default. This assumed that
nearly everyone actually wanted the full set of tests, *if* they had
already chosen to enable the tests at all.
Unfortunately, it turns out that both Debian and Fedora intentionally
have the crypto self-tests enabled in their production kernels. And for
production kernels we do need to keep the testing time down, which
implies just running the "fast" tests, not the full set of tests.
For Fedora, a reason for enabling the tests in production is that they
are being (mis)used to meet the FIPS 140-3 pre-operational testing
requirement.
However, the other reason for enabling the tests in production, which
applies to both distros, is that they provide some value in protecting
users from buggy drivers. Unfortunately, the crypto/ subsystem has many
buggy and untested drivers for off-CPU hardware accelerators on rare
platforms. These broken drivers get shipped to users, and there have
been multiple examples of the tests preventing these buggy drivers from
being used. So effectively, the tests are being relied on in production
kernels. I think this is kind of crazy (untested drivers should just
not be enabled at all), but that seems to be how things work currently.
Thus, reintroduce a kconfig option that controls the level of testing.
Call it CRYPTO_SELFTESTS_FULL instead of the original name
CRYPTO_MANAGER_EXTRA_TESTS, which was slightly misleading.
Moreover, given the "production kernel" use case, make CRYPTO_SELFTESTS
depend on EXPERT instead of DEBUG_KERNEL.
I also haven't reinstated all the #ifdefs in crypto/testmgr.c. Instead,
just rely on the compiler to optimize out unused code.
Fixes: 40b9969796bf ("crypto: testmgr - replace CRYPTO_MANAGER_DISABLE_TESTS with CRYPTO_SELFTESTS")
Fixes: 698de822780f ("crypto: testmgr - make it easier to enable the full set of tests")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
PCM1 not in Pulseaudio's control list; standardize control to
"Speaker" and "Headphone".
Signed-off-by: wangdicheng <wangdicheng@kylinos.cn>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250613063636.239683-1-wangdich9700@163.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The perf_fuzzer found a hard-lockup crash on a RaptorLake machine:
Oops: general protection fault, maybe for address 0xffff89aeceab400: 0000
CPU: 23 UID: 0 PID: 0 Comm: swapper/23
Tainted: [W]=WARN
Hardware name: Dell Inc. Precision 9660/0VJ762
RIP: 0010:native_read_pmc+0x7/0x40
Code: cc e8 8d a9 01 00 48 89 03 5b cd cc cc cc cc 0f 1f ...
RSP: 000:fffb03100273de8 EFLAGS: 00010046
....
Call Trace:
<TASK>
icl_update_topdown_event+0x165/0x190
? ktime_get+0x38/0xd0
intel_pmu_read_event+0xf9/0x210
__perf_event_read+0xf9/0x210
CPUs 16-23 are E-core CPUs that don't support the perf metrics feature.
The icl_update_topdown_event() should not be invoked on these CPUs.
It's a regression of commit:
f9bdf1f95339 ("perf/x86/intel: Avoid disable PMU if !cpuc->enabled in sample read")
The bug introduced by that commit is that the is_topdown_event() function
is mistakenly used to replace the is_topdown_count() call to check if the
topdown functions for the perf metrics feature should be invoked.
Fix it.
Fixes: f9bdf1f95339 ("perf/x86/intel: Avoid disable PMU if !cpuc->enabled in sample read")
Closes: https://lore.kernel.org/lkml/352f0709-f026-cd45-e60c-60dfd97f73f3@maine.edu/
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Vince Weaver <vincent.weaver@maine.edu>
Cc: stable@vger.kernel.org # v6.15+
Link: https://lore.kernel.org/r/20250612143818.2889040-1-kan.liang@linux.intel.com
|
|
The MPC8315E SoC and variants have a GPIO controller at IMMR + 0xc00.
This node was previously missing from the device tree.
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250611-mpc-gpio-v1-1-02d1f75336e2@posteo.net
|
|
The standard property for the model name is called "model".
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250611-microwatt-v2-1-80847bbc5f9c@posteo.net
|
|
VFIO EEH recovery for PCI passthrough devices fails on PowerNV and pseries
platforms due to missing host-side PE bridge reconfiguration. In the
current implementation, eeh_pe_configure() only performs RTAS or OPAL-based
bridge reconfiguration for native host devices, but skips it entirely for
PEs managed through VFIO in guest passthrough scenarios.
This leads to incomplete EEH recovery when a PCI error affects a
passthrough device assigned to a QEMU/KVM guest. Although VFIO triggers the
EEH recovery flow through VFIO_EEH_PE_ENABLE ioctl, the platform-specific
bridge reconfiguration step is silently bypassed. As a result, the PE's
config space is not fully restored, causing subsequent config space access
failures or EEH freeze-on-access errors inside the guest.
This patch fixes the issue by ensuring that eeh_pe_configure() always
invokes the platform's configure_bridge() callback (e.g.,
pseries_eeh_phb_configure_bridge) even for VFIO-managed PEs. This ensures
that RTAS or OPAL calls to reconfigure the PE bridge are correctly issued
on the host side, restoring the PE's configuration space after an EEH
event.
This fix is essential for reliable EEH recovery in QEMU/KVM guests using
VFIO PCI passthrough on PowerNV and pseries systems.
Tested with:
- QEMU/KVM guest using VFIO passthrough (IBM Power9,(lpar)Power11 host)
- Injected EEH errors with pseries EEH errinjct tool on host, recovery
verified on qemu guest.
- Verified successful config space access and CAP_EXP DevCtl restoration
after recovery
Fixes: 212d16cdca2d ("powerpc/eeh: EEH support for VFIO PCI device")
Signed-off-by: Narayana Murty N <nnmlinux@linux.ibm.com>
Reviewed-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Reviewed-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250508062928.146043-1-nnmlinux@linux.ibm.com
|
|
Building vdso32 on power10 with pcrel leads to following errors:
VDSO32A arch/powerpc/kernel/vdso/gettimeofday-32.o
arch/powerpc/kernel/vdso/gettimeofday.S: Assembler messages:
arch/powerpc/kernel/vdso/gettimeofday.S:40: Error: syntax error; found `@', expected `,'
arch/powerpc/kernel/vdso/gettimeofday.S:71: Info: macro invoked from here
arch/powerpc/kernel/vdso/gettimeofday.S:40: Error: junk at end of line: `@notoc'
arch/powerpc/kernel/vdso/gettimeofday.S:71: Info: macro invoked from here
...
make[2]: *** [arch/powerpc/kernel/vdso/Makefile:85: arch/powerpc/kernel/vdso/gettimeofday-32.o] Error 1
make[1]: *** [arch/powerpc/Makefile:388: vdso_prepare] Error 2
Once the above is fixed, the following happens:
VDSO32C arch/powerpc/kernel/vdso/vgettimeofday-32.o
cc1: error: '-mpcrel' requires '-mcmodel=medium'
make[2]: *** [arch/powerpc/kernel/vdso/Makefile:89: arch/powerpc/kernel/vdso/vgettimeofday-32.o] Error 1
make[1]: *** [arch/powerpc/Makefile:388: vdso_prepare] Error 2
make: *** [Makefile:251: __sub-make] Error 2
Make sure pcrel version of CFUNC() macro is used only for powerpc64
builds and remove -mpcrel for powerpc32 builds.
Fixes: 7e3a68be42e1 ("powerpc/64: vmlinux support building with PCREL addresing")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/1fa3453f07d42a50a70114da9905bf7b73304fca.1747073669.git.christophe.leroy@csgroup.eu
|
|
Fix the compile-time warning
drivers/gpu/drm/mgag200/mgag200_ddc.c: warning: EXPORT_SYMBOL() is not used, but #include <linux/export.h> is present
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250612085308.203861-1-tzimmermann@suse.de
|
|
Fix the compile-time warning
drivers/gpu/drm/ast/ast_mode.c: warning: EXPORT_SYMBOL() is not used, but #include <linux/export.h> is present
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250612084257.200907-1-tzimmermann@suse.de
|
|
drm-misc-fixes for v6.16-rc2:
- Fix infinite EPROBE_DEFER loop in vc4 probing.
- Fix amdxdna firmware size.
- mode fixes for meson.
- Kconfig fix for st7171-i2c.
- Fix -EBUSY WARN_ON_ONCE in dma-buf
- Use dma_sync_sgtable_for_cpu in udmabuf.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/62c06195-8bc1-4dae-8777-e86d94e4d9d9@linux.intel.com
|
|
Nested file systems, that is those which invoke call_mmap() within their
own f_op->mmap() handlers, may encounter underlying file systems which
provide the f_op->mmap_prepare() hook introduced by commit c84bf6dd2b83
("mm: introduce new .mmap_prepare() file callback").
We have a chicken-and-egg scenario here - until all file systems are
converted to using .mmap_prepare(), we cannot convert these nested
handlers, as we can't call f_op->mmap from an .mmap_prepare() hook.
So we have to do it the other way round - invoke the .mmap_prepare() hook
from an .mmap() one.
in order to do so, we need to convert VMA state into a struct vm_area_desc
descriptor, invoking the underlying file system's f_op->mmap_prepare()
callback passing a pointer to this, and then setting VMA state accordingly
and safely.
This patch achieves this via the compat_vma_mmap_prepare() function, which
we invoke from call_mmap() if f_op->mmap_prepare() is specified in the
passed in file pointer.
We place the fundamental logic into mm/vma.h where VMA manipulation
belongs. We also update the VMA userland tests to accommodate the
changes.
The compat_vma_mmap_prepare() function and its associated machinery is
temporary, and will be removed once the conversion of file systems is
complete.
We carefully place this code so it can be used with CONFIG_MMU and also
with cutting edge nommu silicon.
[akpm@linux-foundation.org: export compat_vma_mmap_prepare tp fix build]
[lorenzo.stoakes@oracle.com: remove unused declarations]
Link: https://lkml.kernel.org/r/ac3ae324-4c65-432a-8c6d-2af988b18ac8@lucifer.local
Link: https://lkml.kernel.org/r/20250609165749.344976-1-lorenzo.stoakes@oracle.com
Fixes: c84bf6dd2b83 ("mm: introduce new .mmap_prepare() file callback").
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reported-by: Jann Horn <jannh@google.com>
Closes: https://lore.kernel.org/linux-mm/CAG48ez04yOEVx1ekzOChARDDBZzAKwet8PEoPM4Ln3_rk91AzQ@mail.gmail.com/
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Some stress/negative firmware testing around devcmd(s) returning
EAGAIN found that the done bit could get out of sync in the
firmware when it wasn't cleared in a retry case.
While here, change the type of the local done variable to a bool
to match the return type from ionic_dev_cmd_done().
Fixes: ec8ee714736e ("ionic: stretch heartbeat detection")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250609212827.53842-1-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Driver Changes:
- Fix regression disallowing 64K SVM migration (Maarten)
- Use a bounce buffer for WA BB (Lucas)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://lore.kernel.org/r/aEsBQoh5Si3ouPgE@fedora
|
|
While investigating some reports of memory-constrained NUMA machines
failing to mount v3 and v4.0 nfs mounts, we found that svc_init_buffer()
was not attempting to retry allocations from the bulk page allocator.
Typically, this results in a single page allocation being returned and
the mount attempt fails with -ENOMEM. A retry would have allowed the mount
to succeed.
Additionally, it seems that the bulk allocation in svc_init_buffer() is
redundant because svc_alloc_arg() will perform the required allocation and
does the correct thing to retry the allocations.
The call to allocate memory in svc_alloc_arg() drops the preferred node
argument, but I expect we'll still allocate on the preferred node because
the allocation call happens within the svc thread context, which chooses
the node with memory closest to the current thread's execution.
This patch cleans out the bulk allocation in svc_init_buffer() to allow
svc_alloc_arg() to handle the allocation/retry logic for rq_pages.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Fixes: ed603bcf4fea ("sunrpc: Replace the rq_pages array with dynamically-allocated memory")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The new code neglects to remove a freshly-allocated RCL from the
callback's referring call list when no matching referring call is
found.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202505171002.cE46sdj5-lkp@intel.com/
Fixes: 4f3c8d8c9e10 ("NFSD: Implement CB_SEQUENCE referring call lists")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Pull bitmap fix from Yury Norov:
"Fix for __GENMASK() and __GENMASK_ULL() in UAPI"
* tag 'bitmap-for-6.16-rc2' of https://github.com/norov/linux:
uapi: bitops: use UAPI-safe variant of BITS_PER_LONG again
|
|
Currently, cached directory contents were not reused across subsequent
'ls' operations because the cache validity check relied on comparing
the ctx pointer, which changes with each readdir invocation. As a
result, the cached dir entries was not marked as valid and the cache was
not utilized for subsequent 'ls' operations.
This change uses the file pointer, which remains consistent across all
readdir calls for a given directory instance, to associate and validate
the cache. As a result, cached directory contents can now be
correctly reused, improving performance for repeated directory listings.
Performance gains with local windows SMB server:
Without the patch and default actimeo=1:
1000 directory enumeration operations on dir with 10k files took 135.0s
With this patch and actimeo=0:
1000 directory enumeration operations on dir with 10k files took just 5.1s
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Customer reported that one of their applications started failing to
open files with STATUS_INSUFFICIENT_RESOURCES due to NetApp server
hitting the maximum number of opens to same file that it would allow
for a single client connection.
It turned out the client was failing to reuse open handles with
deferred closes because matching ->f_flags directly without masking
off O_CREAT|O_EXCL|O_TRUNC bits first broke the comparision and then
client ended up with thousands of deferred closes to same file. Those
bits are already satisfied on the original open, so no need to check
them against existing open handles.
Reproducer:
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <fcntl.h>
#include <pthread.h>
#define NR_THREADS 4
#define NR_ITERATIONS 2500
#define TEST_FILE "/mnt/1/test/dir/foo"
static char buf[64];
static void *worker(void *arg)
{
int i, j;
int fd;
for (i = 0; i < NR_ITERATIONS; i++) {
fd = open(TEST_FILE, O_WRONLY|O_CREAT|O_APPEND, 0666);
for (j = 0; j < 16; j++)
write(fd, buf, sizeof(buf));
close(fd);
}
}
int main(int argc, char *argv[])
{
pthread_t t[NR_THREADS];
int fd;
int i;
fd = open(TEST_FILE, O_WRONLY|O_CREAT|O_TRUNC, 0666);
close(fd);
memset(buf, 'a', sizeof(buf));
for (i = 0; i < NR_THREADS; i++)
pthread_create(&t[i], NULL, worker, NULL);
for (i = 0; i < NR_THREADS; i++)
pthread_join(t[i], NULL);
return 0;
}
Before patch:
$ mount.cifs //srv/share /mnt/1 -o ...
$ mkdir -p /mnt/1/test/dir
$ gcc repro.c && ./a.out
...
number of opens: 1391
After patch:
$ mount.cifs //srv/share /mnt/1 -o ...
$ mkdir -p /mnt/1/test/dir
$ gcc repro.c && ./a.out
...
number of opens: 1
Cc: linux-cifs@vger.kernel.org
Cc: David Howells <dhowells@redhat.com>
Cc: Jay Shin <jaeshin@redhat.com>
Cc: Pierguido Lambri <plambri@redhat.com>
Fixes: b8ea3b1ff544 ("smb: enable reuse of deferred file handles for write operations")
Acked-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth and wireless.
Current release - regressions:
- af_unix: allow passing cred for embryo without SO_PASSCRED/SO_PASSPIDFD
Current release - new code bugs:
- eth: airoha: correct enable mask for RX queues 16-31
- veth: prevent NULL pointer dereference in veth_xdp_rcv when peer
disappears under traffic
- ipv6: move fib6_config_validate() to ip6_route_add(), prevent
invalid routes
Previous releases - regressions:
- phy: phy_caps: don't skip better duplex match on non-exact match
- dsa: b53: fix untagged traffic sent via cpu tagged with VID 0
- Revert "wifi: mwifiex: Fix HT40 bandwidth issue.", it caused
transient packet loss, exact reason not fully understood, yet
Previous releases - always broken:
- net: clear the dst when BPF is changing skb protocol (IPv4 <> IPv6)
- sched: sfq: fix a potential crash on gso_skb handling
- Bluetooth: intel: improve rx buffer posting to avoid causing issues
in the firmware
- eth: intel: i40e: make reset handling robust against multiple
requests
- eth: mlx5: ensure FW pages are always allocated on the local NUMA
node, even when device is configure to 'serve' another node
- wifi: ath12k: fix GCC_GCC_PCIE_HOT_RST definition for WCN7850,
prevent kernel crashes
- wifi: ath11k: avoid burning CPU in ath11k_debugfs_fw_stats_request()
for 3 sec if fw_stats_done is not set"
* tag 'net-6.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (70 commits)
selftests: drv-net: rss_ctx: Add test for ntuple rules targeting default RSS context
net: ethtool: Don't check if RSS context exists in case of context 0
af_unix: Allow passing cred for embryo without SO_PASSCRED/SO_PASSPIDFD.
ipv6: Move fib6_config_validate() to ip6_route_add().
net: drv: netdevsim: don't napi_complete() from netpoll
net/mlx5: HWS, Add error checking to hws_bwc_rule_complex_hash_node_get()
veth: prevent NULL pointer dereference in veth_xdp_rcv
net_sched: remove qdisc_tree_flush_backlog()
net_sched: ets: fix a race in ets_qdisc_change()
net_sched: tbf: fix a race in tbf_change()
net_sched: red: fix a race in __red_change()
net_sched: prio: fix a race in prio_tune()
net_sched: sch_sfq: reject invalid perturb period
net: phy: phy_caps: Don't skip better duplex macth on non-exact match
MAINTAINERS: Update Kuniyuki Iwashima's email address.
selftests: net: add test case for NAT46 looping back dst
net: clear the dst when changing skb protocol
net/mlx5e: Fix number of lanes to UNKNOWN when using data_rate_oper
net/mlx5e: Fix leak of Geneve TLV option object
net/mlx5: HWS, make sure the uplink is the last destination
...
|
Mario Limonciello
Rafael J. Wysocki
Linus Torvalds
Oleg Nesterov
Raven Black
Mark Brown
Jens Axboe
Madhavan Srinivasan
Thierry Reding
Bagas Sanjaya
Jason Gunthorpe
Jacob Keller
Zhi Wang
Colin Ian King
Gyeyoung Baek
Brian Norris
Niklas Cassel
Matthew Wilcox (Oracle)
Kurt Borja
Thangaraj Samynathan
Sven Peter
Eric Biggers
wangdicheng
Kan Liang
J. Neuschäfer
Narayana Murty N
Christophe Leroy
Thomas Zimmermann
Dave Airlie
Lorenzo Stoakes
Brett Creeley
Benjamin Coddington
Chuck Lever
Bharath SM
Paulo Alcantara