| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull tty/serial driver updates from Greg KH:
"Here is the tty and serial driver updates for 5.8-rc1
Nothing huge at all, just a lot of little serial driver fixes, updates
for new devices and features, and other small things. Full details are
in the shortlog.
All of these have been in linux-next with no issues for a while"
* tag 'tty-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (67 commits)
tty: serial: qcom_geni_serial: Add 51.2MHz frequency support
tty: serial: imx: clear Ageing Timer Interrupt in handler
serial: 8250_fintek: Add F81966 Support
sc16is7xx: Add flag to activate IrDA mode
dt-bindings: sc16is7xx: Add flag to activate IrDA mode
serial: 8250: Support rs485 bus termination GPIO
serial: 8520_port: Fix function param documentation
dt-bindings: serial: Add binding for rs485 bus termination GPIO
vt: keyboard: avoid signed integer overflow in k_ascii
serial: 8250: Enable 16550A variants by default on non-x86
tty: hvc_console, fix crashes on parallel open/close
serial: imx: Initialize lock for non-registered console
sc16is7xx: Read the LSR register for basic device presence check
sc16is7xx: Allow sharing the IRQ line
sc16is7xx: Use threaded IRQ
sc16is7xx: Always use falling edge IRQ
tty: n_gsm: Fix bogus i++ in gsm_data_kick
tty: n_gsm: Remove unnecessary test in gsm_print_packet()
serial: stm32: add no_console_suspend support
tty: serial: fsl_lpuart: Use __maybe_unused instead of #if CONFIG_PM_SLEEP
...
|
|
Pull USB/PHY driver updates from Greg KH:
"Here are the large set of USB and PHY driver updates for 5.8-rc1.
Nothing huge, just lots of little things:
- USB gadget fixes and additions all over the place
- new PHY drivers
- PHY driver fixes and updates
- XHCI driver updates
- musb driver updates
- more USB-serial driver ids added
- various USB quirks added
- thunderbolt minor updates and fixes
- typec updates and additions
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (245 commits)
usb: dwc3: meson-g12a: fix USB2 PHY initialization on G12A and A1 SoCs
usb: dwc3: meson-g12a: fix error path when fetching the reset line fails
Revert "dt-bindings: usb: qcom,dwc3: Convert USB DWC3 bindings"
Revert "dt-bindings: usb: qcom,dwc3: Add compatible for SC7180"
Revert "dt-bindings: usb: qcom,dwc3: Introduce interconnect properties for Qualcomm DWC3 driver"
USB: serial: ch341: fix lockup of devices with limited prescaler
USB: serial: ch341: add basis for quirk detection
CDC-ACM: heed quirk also in error handling
USB: serial: option: add Telit LE910C1-EUX compositions
usb: musb: Fix runtime PM imbalance on error
usb: musb: jz4740: Prevent lockup when CONFIG_SMP is set
usb: musb: mediatek: add reset FADDR to zero in reset interrupt handle
usb: musb: use true for 'use_dma'
usb: musb: start session in resume for host port
usb: musb: return -ESHUTDOWN in urb when three-strikes error happened
USB: serial: qcserial: add DW5816e QDL support
thunderbolt: Add trivial .shutdown
usb: dwc3: keystone: Turn on USB3 PHY before controller
dt-bindings: usb: ti,keystone-dwc3.yaml: Add USB3.0 PHY property
dt-bindings: usb: convert keystone-usb.txt to YAML
...
|
|
Pull arch/sh updates from Rich Felker:
"Fix for arch/sh build regression with newer binutils, removal of SH5,
fixes for module exports, and misc cleanup"
* tag 'sh-for-5.8' of git://git.libc.org/linux-sh:
sh: remove sh5 support
sh: add missing EXPORT_SYMBOL() for __delay
sh: Convert ins[bwl]/outs[bwl] macros to inline functions
sh: Convert iounmap() macros to inline functions
sh: Add missing DECLARE_EXPORT() for __ashiftrt_r4_xx
sh: configs: Cleanup old Kconfig IO scheduler options
arch/sh: vmlinux.scr
sh: Replace CONFIG_MTD_M25P80 with CONFIG_MTD_SPI_NOR in sh7757lcr_defconfig
sh: sh4a: Bring back tmu3_device early device
|
|
Pull Kconfig updates from Masahiro Yamada:
- allow only 'config', 'comment', 'if' statements inside 'choice' since
the other statements are not sensible inside 'choice' and should be
grammatical error
- support LMC_KEEP env variable for 'make local{yes,mod}config' to
preserve some CONFIG options
- deprecate 'make kvmconfig' and 'make xenconfig' in favor of
'make kvm_guest.config' and 'make xen.config'
- code cleanups
* tag 'kconfig-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: announce removal of 'kvmconfig' and 'xenconfig' shorthands
streamline_config.pl: add LMC_KEEP to preserve some kconfigs
kconfig: allow only 'config', 'comment', and 'if' inside 'choice'
kconfig: tests: remove randconfig test for choice in choice
kconfig: do not assign a variable in the return statement
kconfig: do not use OR-assignment for zero-cleared structure
|
|
Pull Kbuild updates from Masahiro Yamada:
- fix warnings in 'make clean' for ARCH=um, hexagon, h8300, unicore32
- ensure to rebuild all objects when the compiler is upgraded
- exclude system headers from dependency tracking and fixdep processing
- fix potential bit-size mismatch between the kernel and BPF user-mode
helper
- add the new syntax 'userprogs' to build user-space programs for the
target architecture (the same arch as the kernel)
- compile user-space sample code under samples/ for the target arch
instead of the host arch
- make headers_install fail if a CONFIG option is leaked to user-space
- sanitize the output format of scripts/checkstack.pl
- handle ARM 'push' instruction in scripts/checkstack.pl
- error out before modpost if a module name conflict is found
- error out when multiple directories are passed to M= because this
feature is broken for a long time
- add CONFIG_DEBUG_INFO_COMPRESSED to support compressed debug info
- a lot of cleanups of modpost
- dump vmlinux symbols out into vmlinux.symvers, and reuse it in the
second pass of modpost
- do not run the second pass of modpost if nothing in modules is
updated
- install modules.builtin(.modinfo) by 'make install' as well as by
'make modules_install' because it is useful even when
CONFIG_MODULES=n
- add new command line variables, GZIP, BZIP2, LZOP, LZMA, LZ4, and XZ
to allow users to use alternatives such as pigz, pbzip2, etc.
* tag 'kbuild-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (96 commits)
kbuild: add variables for compression tools
Makefile: install modules.builtin even if CONFIG_MODULES=n
mksysmap: Fix the mismatch of '.L' symbols in System.map
kbuild: doc: rename LDFLAGS to KBUILD_LDFLAGS
modpost: change elf_info->size to size_t
modpost: remove is_vmlinux() helper
modpost: strip .o from modname before calling new_module()
modpost: set have_vmlinux in new_module()
modpost: remove mod->skip struct member
modpost: add mod->is_vmlinux struct member
modpost: remove is_vmlinux() call in check_for_{gpl_usage,unused}()
modpost: remove mod->is_dot_o struct member
modpost: move -d option in scripts/Makefile.modpost
modpost: remove -s option
modpost: remove get_next_text() and make {grab,release_}file static
modpost: use read_text_file() and get_line() for reading text files
modpost: avoid false-positive file open error
modpost: fix potential mmap'ed file overrun in get_src_version()
modpost: add read_text_file() and get_line() helpers
modpost: do not call get_modinfo() for vmlinux(.o)
...
|
|
Pull dma-mapping helpers from Christoph Hellwig:
"These were in a separate stable branch so that various media and drm
trees could pull the in for bug fixes, but looking at linux-next that
hasn't actually happened yet. Still sending the APIs to you in the
hope that these bug fixes get picked up for 5.8 in one way or another.
Summary:
- add DMA mapping helpers for struct sg_table (Marek Szyprowski)"
* tag 'dma-mapping-5.8-2' of git://git.infradead.org/users/hch/dma-mapping:
iommu: add generic helper for mapping sgtable objects
scatterlist: add generic wrappers for iterating over sgtable objects
dma-mapping: add generic helpers for mapping sgtable objects
|
|
Pull dma-mapping updates from Christoph Hellwig:
- enhance the dma pool to allow atomic allocation on x86 with AMD SEV
(David Rientjes)
- two small cleanups (Jason Yan and Peter Collingbourne)
* tag 'dma-mapping-5.8' of git://git.infradead.org/users/hch/dma-mapping:
dma-contiguous: fix comment for dma_release_from_contiguous
dma-pool: scale the default DMA coherent pool size with memory capacity
x86/mm: unencrypted non-blocking DMA allocations use coherent pools
dma-pool: add pool sizes to debugfs
dma-direct: atomic allocations must come from atomic coherent pools
dma-pool: dynamically expanding atomic pools
dma-pool: add additional coherent pools to map to gfp mask
dma-remap: separate DMA atomic pools from direct remap code
dma-debug: make __dma_entry_alloc_check_leak() static
|
|
Pull dmi update from Jean Delvare.
* 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
firmware/dmi: Report DMI Bios & EC firmware release
|
|
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Program MPS for RCiEP devices (Ashok Raj)
- Fix pci_register_host_bridge() device_register() error handling
(Rob Herring)
- Fix pci_host_bridge struct device release/free handling (Rob
Herring)
Resource management:
- Allow resizing BARs for devices on root bus (Ard Biesheuvel)
Power management:
- Reduce Thunderbolt resume time by working around devices that don't
support DLL Link Active reporting (Mika Westerberg)
- Work around a Pericom USB controller OHCI/EHCI PME# defect
(Kai-Heng Feng)
Virtualization:
- Add ACS quirk for Intel Root Complex Integrated Endpoints (Ashok
Raj)
- Avoid FLR for AMD Starship USB 3.0 (Kevin Buettner)
- Avoid FLR for AMD Matisse HD Audio & USB 3.0 (Marcos Scriven)
Error handling:
- Use only _OSC (not HEST FIRMWARE_FIRST) to determine AER ownership
(Alexandru Gagniuc, Kuppuswamy Sathyanarayanan)
- Reduce verbosity by logging only ACPI_NOTIFY_DISCONNECT_RECOVER
events (Kuppuswamy Sathyanarayanan)
- Don't enable AER by default in Kconfig (Bjorn Helgaas)
Peer-to-peer DMA:
- Add AMD Zen Raven and Renoir Root Ports to whitelist (Alex Deucher)
ASPM:
- Allow ASPM on links to PCIe-to-PCI/PCI-X Bridges (Kai-Heng Feng)
Endpoint framework:
- Fix DMA channel release in test (Kunihiko Hayashi)
- Add page size as argument to pci_epc_mem_init() (Lad Prabhakar)
- Add support to handle multiple base for mapping outbound memory
(Lad Prabhakar)
Generic host bridge driver:
- Support building as module (Rob Herring)
- Eliminate pci_host_common_probe wrappers (Rob Herring)
Amlogic Meson PCIe controller driver:
- Don't use FAST_LINK_MODE to set up link (Marc Zyngier)
Broadcom STB PCIe controller driver:
- Disable ASPM L0s if 'aspm-no-l0s' in DT (Jim Quinlan)
- Fix clk_put() error (Jim Quinlan)
- Fix window register offset (Jim Quinlan)
- Assert fundamental reset on initialization (Nicolas Saenz Julienne)
- Add notify xHCI reset property (Nicolas Saenz Julienne)
- Add init routine for Raspberry Pi 4 VL805 USB controller (Nicolas
Saenz Julienne)
- Sync with Raspberry Pi 4 firmware for VL805 initialization (Nicolas
Saenz Julienne)
Cadence PCIe controller driver:
- Remove "cdns,max-outbound-regions" DT property (replaced by
"ranges") (Kishon Vijay Abraham I)
- Read 32-bit (not 16-bit) Vendor ID/Device ID property from DT
(Kishon Vijay Abraham I)
Marvell Aardvark PCIe controller driver:
- Improve link training (Marek Behún)
- Add PHY support (Marek Behún)
- Add "phys", "max-link-speed", "reset-gpios" to dt-binding (Marek
Behún)
- Train link immediately after enabling training to work around
detection issues with some cards (Pali Rohár)
- Issue PERST via GPIO to work around detection issues (Pali Rohár)
- Don't blindly enable ASPM L0s (Pali Rohár)
- Replace custom macros by standard linux/pci_regs.h macros (Pali
Rohár)
Microsoft Hyper-V host bridge driver:
- Fix probe failure path to release resource (Wei Hu)
- Retry PCI bus D0 entry on invalid device state for kdump (Wei Hu)
Renesas R-Car PCIe controller driver:
- Fix incorrect programming of OB windows (Andrew Murray)
- Add suspend/resume (Kazufumi Ikeda)
- Rename pcie-rcar.c to pcie-rcar-host.c (Lad Prabhakar)
- Add endpoint controller driver (Lad Prabhakar)
- Fix PCIEPAMR mask calculation (Lad Prabhakar)
- Add r8a77961 to DT binding (Yoshihiro Shimoda)
Socionext UniPhier Pro5 controller driver:
- Add endpoint controller driver (Kunihiko Hayashi)
Synopsys DesignWare PCIe controller driver:
- Program outbound ATU upper limit register (Alan Mikhak)
- Fix inner MSI IRQ domain registration (Marc Zyngier)
Miscellaneous:
- Check for platform_get_irq() failure consistently (negative return
means failure) (Aman Sharma)
- Fix several runtime PM get/put imbalances (Dinghao Liu)
- Use flexible-array and struct_size() helpers for code cleanup
(Gustavo A. R. Silva)
- Update & fix issues in bridge emulation of PCIe registers (Jon
Derrick)
- Add macros for bridge window names (PCI_BRIDGE_IO_WINDOW, etc)
(Krzysztof Wilczyński)
- Work around Intel PCH MROMs that have invalid BARs (Xiaochun Lee)"
* tag 'pci-v5.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (100 commits)
PCI: uniphier: Add Socionext UniPhier Pro5 PCIe endpoint controller driver
PCI: Add ACS quirk for Intel Root Complex Integrated Endpoints
PCI/DPC: Print IRQ number used by port
PCI/AER: Use "aer" variable for capability offset
PCI/AER: Remove redundant dev->aer_cap checks
PCI/AER: Remove redundant pci_is_pcie() checks
PCI/AER: Remove HEST/FIRMWARE_FIRST parsing for AER ownership
PCI: tegra: Fix runtime PM imbalance on error
PCI: vmd: Filter resource type bits from shadow register
PCI: tegra194: Fix runtime PM imbalance on error
dt-bindings: PCI: Add UniPhier PCIe endpoint controller description
PCI: hv: Use struct_size() helper
PCI: Rename _DSM constants to align with spec
PCI: Avoid FLR for AMD Starship USB 3.0
PCI: Avoid FLR for AMD Matisse HD Audio & USB 3.0
x86/PCI: Drop unused xen_register_pirq() gsi_override parameter
PCI: dwc: Use private data pointer of "struct irq_domain" to get pcie_port
PCI: amlogic: meson: Don't use FAST_LINK_MODE to set up link
PCI: dwc: Fix inner MSI IRQ domain registration
PCI: dwc: pci-dra7xx: Use devm_platform_ioremap_resource_byname()
...
|
|
Fixes coccicheck warning:
fs/hpfs/buffer.c:56:2-3: Unneeded semicolon
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Mikulas Patocka <mikulas@twibright.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull workqueue updates from Tejun Heo:
"Mostly cleanups and other trivial changes.
The only interesting change is Sebastian's rcuwait conversion for RT"
* 'for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: use BUILD_BUG_ON() for compile time test instead of WARN_ON()
workqueue: fix a piece of comment about reserved bits for work flags
workqueue: remove useless unlock() and lock() in series
workqueue: void unneeded requeuing the pwq in rescuer thread
workqueue: Convert the pool::lock and wq_mayday_lock to raw_spinlock_t
workqueue: Use rcuwait for wq_manager_wait
workqueue: Remove unnecessary kfree() call in rcu_free_wq()
workqueue: Fix an use after free in init_rescuer()
workqueue: Use IS_ERR and PTR_ERR instead of PTR_ERR_OR_ZERO.
|
|
Pull cgroup updates from Tejun Heo:
"Just two patches: one to add system-level cpu.stat to the root cgroup
for convenience and a trivial comment update"
* 'for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: add cpu.stat file to root cgroup
cgroup: Remove stale comments
|
|
Pull integrity updates from Mimi Zohar:
"The main changes are extending the TPM 2.0 PCR banks with bank
specific file hashes, calculating the "boot_aggregate" based on other
TPM PCR banks, using the default IMA hash algorithm, instead of SHA1,
as the basis for the cache hash table key, and preventing the mprotect
syscall to circumvent an IMA mmap appraise policy rule.
- In preparation for extending TPM 2.0 PCR banks with bank specific
digests, commit 0b6cf6b97b7e ("tpm: pass an array of
tpm_extend_digest structures to tpm_pcr_extend()") modified
tpm_pcr_extend(). The original SHA1 file digests were
padded/truncated, before being extended into the other TPM PCR
banks. This pull request calculates and extends the TPM PCR banks
with bank specific file hashes completing the above change.
- The "boot_aggregate", the first IMA measurement list record, is the
"trusted boot" link between the pre-boot environment and the
running OS. With TPM 2.0, the "boot_aggregate" record is not
limited to being based on the SHA1 TPM PCR bank, but can be
calculated based on any enabled bank, assuming the hash algorithm
is also enabled in the kernel.
Other changes include the following and five other bug fixes/code
clean up:
- supporting both a SHA1 and a larger "boot_aggregate" digest in a
custom template format containing both the the SHA1 ('d') and
larger digests ('d-ng') fields.
- Initial hash table key fix, but additional changes would be good"
* tag 'integrity-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: Directly free *entry in ima_alloc_init_template() if digests is NULL
ima: Call ima_calc_boot_aggregate() in ima_eventdigest_init()
ima: Directly assign the ima_default_policy pointer to ima_rules
ima: verify mprotect change is consistent with mmap policy
evm: Fix possible memory leak in evm_calc_hmac_or_hash()
ima: Set again build_ima_appraise variable
ima: Remove redundant policy rule set in add_rules()
ima: Fix ima digest hash table key calculation
ima: Use ima_hash_algo for collision detection in the measurement list
ima: Calculate and extend PCR with digests in ima_template_entry
ima: Allocate and initialize tfm for each PCR bank
ima: Switch to dynamically allocated buffer for template digests
ima: Store template digest directly in ima_template_entry
ima: Evaluate error in init_ima()
ima: Switch to ima_hash_algo for boot aggregate
|
|
Allow user to use alternative implementations of compression tools,
such as pigz, pbzip2, pxz. For example, multi-threaded tools to
speed up the build:
$ make GZIP=pigz BZIP2=pbzip2
Variables _GZIP, _BZIP2, _LZOP are used internally because original env
vars are reserved by the tools. The use of GZIP in gzip tool is obsolete
since 2015. However, alternative implementations (e.g., pigz) still rely
on it. BZIP2, BZIP, LZOP vars are not obsolescent.
The credit goes to @grsecurity.
As a sidenote, for multi-threaded lzma, xz compression one can use:
$ export XZ_OPT="--threads=0"
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Many applications check for available kernel features via:
- /proc/modules (loaded modules, present if CONFIG_MODULES=y)
- $(MODLIB)/modules.builtin (builtin modules)
They fail to detect features if the kernel was built with CONFIG_MODULES=n
and modules.builtin isn't installed.
Therefore, add the target "_builtin_inst_" and make "install" and
"modules_install" depend on it.
Tests results:
- make install: kernel image is copied as before, modules.builtin copied
- make modules_install: (CONFIG_MODULES=n) nothing is copied, exit 1
Signed-off-by: Jonas Zeiger <jonas.zeiger@talpidae.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
When System.map was generated, the kernel used mksysmap to
filter the kernel symbols, but all the symbols with the
second letter 'L' in the kernel were filtered out, not just
the symbols starting with 'dot + L'.
For example:
ashimida@ubuntu:~/linux$ cat System.map |grep ' .L'
ashimida@ubuntu:~/linux$ nm -n vmlinux |grep ' .L'
ffff0000088028e0 t bLength_show
......
ffff0000092e0408 b PLLP_OUTC_lock
ffff0000092e0410 b PLLP_OUTA_lock
The original intent should be to filter out all local symbols
starting with '.L', so the dot should be escaped.
Fixes: 00902e984732 ("mksysmap: Add h8300 local symbol pattern")
Signed-off-by: ashimida <ashimida@linux.alibaba.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Commit d503ac531a52 ("kbuild: rename LDFLAGS to KBUILD_LDFLAGS") missed
to update the documentation.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Align with the mmap / munmap APIs.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Now that is_vmlinux() is called only in new_module(), we can inline
the function call.
modname is the basename with '.o' is stripped. No need to compare it
with 'vmlinux.o'.
vmlinux is always located at the current working directory. No need
to strip the directory path.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
new_module() conditionally strips the .o because the modname has .o
suffix when it is called from read_symbols(), but no .o when it is
called from read_dump().
It is clearer to strip .o in read_symbols().
I also used flexible-array for mod->name.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Set have_vmlinux flag in a single place.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The meaning of 'skip' is obscure since it does not explain
"what to skip".
mod->skip is set when it is vmlinux or the module info came from
a dump file.
So, mod->skip is equivalent to (mod->is_vmlinux || mod->from_dump).
For the check in write_namespace_deps_files(), mod->is_vmlinux is
unneeded because the -d option is not passed in the first pass of
modpost.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
is_vmlinux() is called in several places to check whether the current
module is vmlinux or not.
It is faster and clearer to check mod->is_vmlinux flag.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
check_exports() is never called for vmlinux because mod->skip is set
for vmlinux.
Hence, check_for_gpl_usage() and check_for_unused() are not called
for vmlinux, either. is_vmlinux() is always false here.
Remove the is_vmlinux() calls, and hard-code the ".ko" suffix.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Previously, there were two cases where mod->is_dot_o is unset:
[1] the executable 'vmlinux' in the second pass of modpost
[2] modules loaded by read_dump()
I think [1] was intended usage to distinguish 'vmlinux.o' and 'vmlinux'.
Now that modpost does not parse the executable 'vmlinux', this case
does not happen.
[2] is obscure, maybe a bug. Module.symver stores module paths without
extension. So, none of modules loaded by read_dump() has the .o suffix,
and new_module() unsets ->is_dot_o. Anyway, it is not a big deal because
handle_symbol() is not called for the case.
To sum up, all the parsed ELF files are .o files.
mod->is_dot_o is unneeded.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Collect options for modules into a single place.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The -s option was added by commit 8d8d8289df65 ("kbuild: do not do
section mismatch checks on vmlinux in 2nd pass").
Now that the second pass does not parse vmlinux, this option is
unneeded.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
get_next_line() is no longer used. Remove.
grab_file() and release_file() are only used in modpost.c. Make them
static.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
grab_file() mmaps a file, but it is not so efficient here because
get_next_line() copies every line to the temporary buffer anyway.
read_text_file() and get_line() are simpler. get_line() exploits the
library function strchr().
Going forward, the missing *.symvers or *.cmd is a fatal error.
This should not happen because scripts/Makefile.modpost guards the
-i option files with $(wildcard $(input-symdump)).
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
One problem of grab_file() is that it cannot distinguish the following
two cases:
- It cannot read the file (the file does not exist, or read permission
is not set)
- It can read the file, but the file size is zero
This is because grab_file() calls mmap(), which requires the mapped
length is greater than 0. Hence, grab_file() fails for both cases.
If an empty header file were included for checksum calculation, the
following warning would be printed:
WARNING: modpost: could not open ...: Invalid argument
An empty file is a valid source file, so it should not fail.
Use read_text_file() instead. It can read a zero-length file.
Then, parse_file() will succeed with doing nothing.
Going forward, the first case (it cannot read the file) is a fatal
error. If the source file from which an object was compiled is missing,
something went wrong.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
I do not know how reliably this function works, but it looks dangerous
to me.
strchr(sources, '\n');
... continues searching until it finds '\n' or it reaches the '\0'
terminator. In other words, 'sources' should be a null-terminated
string.
However, grab_file() just mmaps a file, so 'sources' is not terminated
with null byte. If the file does not contain '\n' at all, strchr() will
go beyond the mmap'ed memory.
Use read_text_file(), which loads the file content into a malloc'ed
buffer, appending null byte.
Here we are interested only in the first line of *.mod files. Use
get_line() helper to get the first line.
This also makes missing *.mod file a fatal error.
Commit 4be40e22233c ("kbuild: do not emit src version warning for
non-modules") ignored missing *.mod files.
I do not fully understand what that commit addressed, but commit
91341d4b2c19 ("kbuild: introduce new option to enhance section mismatch
analysis") introduced partial section checks by using modpost. built-in.o
was parsed by modpost. Even modules had a problem because *.mod files
were created after the modpost check.
Commit b7dca6dd1e59 ("kbuild: create *.mod with full directory path and
remove MODVERDIR") stopped doing that. Now that modpost is only invoked
after the directory descend, *.mod files should always exist at the
modpost stage.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
modpost uses grab_file() to open a file, but it is not suitable for
a text file because the mmap'ed file is not terminated by null byte.
Actually, I see some issues for the use of grab_file().
The new helper, read_text_file() loads the whole file content into a
malloc'ed buffer, and appends a null byte. Then, get_line() reads
each line.
To handle text files, I intend to replace as follows:
grab_file() -> read_text_file()
get_new_line() -> get_line()
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The three calls of get_modinfo() ("license", "import_ns", "version")
always return NULL for vmlinux(.o) because the built-in module info is
prefixed with __MODULE_INFO_PREFIX.
It is harmless to call get_modinfo(), but there is no point to search
for what apparently does not exist.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
As far as I understood, this code gets rid of '$Revision$' or '$Revision:'
of CVS, RCS or whatever in MODULE_VERSION() tags.
Remove the primeval code.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
If modpost fails to load a symbol dump file, it cannot check unresolved
symbols, hence module dependency will not be added. Nor CRCs can be added.
Currently, external module builds check only $(objtree)/Module.symvers,
but it should check files specified by KBUILD_EXTRA_SYMBOLS as well.
Move the warning message from the top Makefile to scripts/Makefile.modpost
and print the warning if any dump file is missing.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
check_exports() does not print warnings about unresolved symbols if
vmlinux is missing because there would be too many.
This situation happens when you do 'make modules' from the clean
tree, or compile external modules against a kernel tree that has
not been completely built.
It is dangerous to not check unresolved symbols because you might be
building useless modules. At least it should be warned.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Currently, the second pass of modpost is always invoked when you run
'make' or 'make modules' even if none of modules is changed.
Use if_changed to invoke it only when it is necessary.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The full build runs modpost twice, first for vmlinux.o and second for
modules.
The first pass dumps all the vmlinux symbols into Module.symvers, but
the second pass parses vmlinux again instead of reusing the dump file,
presumably because it needs to avoid accumulating stale symbols.
Loading symbol info from a dump file is faster than parsing an ELF object.
Besides, modpost deals with various issues to parse vmlinux in the second
pass.
A solution is to make the first pass dumps symbols into a separate file,
vmlinux.symvers. The second pass reads it, and parses module .o files.
The merged symbol information is dumped into Module.symvers in the same
way as before.
This makes further modpost cleanups possible.
Also, it fixes the problem of 'make vmlinux', which previously overwrote
Module.symvers, throwing away module symbols.
I slightly touched scripts/link-vmlinux.sh so that vmlinux is re-linked
when you cross this commit. Otherwise, vmlinux.symvers would not be
generated.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Prepare to use -i for in-tree modpost as well.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The symbol dump *.symvers is the output of modpost. Print it in
the short log.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Previously, the -i option had two functions; load a symbol dump file,
and set the external_module flag.
I want to assign a dedicate option for each of them.
Going forward, the -i is used to load a symbol dump file, and the -e
to set the external_module flag.
With this, we will be able to use -i for loading in-kernel symbols.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The -i option is used to include Modules.symver as well as files from
$(KBUILD_EXTRA_SYMBOLS).
Make the struct and variable names more generic.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Now that there is no difference between -i and -e, they can be unified.
Make modpost accept the -i option multiple times, then remove -e.
I will reuse -e for a different purpose.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The meaning of sym->kernel is obscure; it is set for in-kernel symbols
loaded from Modules.symvers. This happens only when we are building
external modules, and it is used to determine whether to dump symbols
to $(KBUILD_EXTMOD)/Modules.symvers
It is clearer to remember whether the symbol or module came from a dump
file or ELF object.
This changes the KBUILD_EXTRA_SYMBOLS behavior. Previously, symbols
loaded from KBUILD_EXTRA_SYMBOLS are accumulated into the current
$(KBUILD_EXTMOD)/Modules.symvers
Going forward, they will be only used to check symbol references, but
not dumped into the current $(KBUILD_EXTMOD)/Modules.symvers. I believe
this makes more sense.
sym->vmlinux will have no user. Remove it too.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Some vendors like HPe or Dell, encode the release version of their BIOS
in the "System BIOS {Major|Minor} Release" fields of Type 0.
This information is used to know which bios release actually runs.
It could be used for some quirks, debugging sessions or inventory tasks.
A typical output for a Dell system running the 65.27 bios is :
[root@t1700 ~]# cat /sys/devices/virtual/dmi/id/bios_release
65.27
[root@t1700 ~]#
Servers that have a BMC encode the release version of their firmware in the
"Embedded Controller Firmware {Major|Minor} Release" fields of Type 0.
This information is used to know which BMC release actually runs.
It could be used for some quirks, debugging sessions or inventory tasks.
A typical output for a Dell system running the 3.75 bmc release is :
[root@t1700 ~]# cat /sys/devices/virtual/dmi/id/ec_firmware_release
3.75
[root@t1700 ~]#
Signed-off-by: Erwan Velu <e.velu@criteo.com>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
|
|
Pull orangefs updates from Mike Marshall:
- John Hubbard's conversion from get_user_pages() to pin_user_pages()
- Colin Ian King's removal of an unneeded variable initialization
* tag 'for-linus-5.8-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
orangefs: convert get_user_pages() --> pin_user_pages()
orangefs: remove redundant assignment to variable ret
|
|
Pull dlm updates from David Teigland:
"This set includes a couple minor cleanups, and dropping the
interruptible from a wait_event that waits for an event from the
userspace cluster management"
* tag 'dlm-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
dlm: remove BUG() before panic()
dlm: Switch to using wait_event()
fs:dlm:remove unneeded semicolon in rcom.c
dlm: user: Replace zero-length array with flexible-array member
dlm: dlm_internal: Replace zero-length array with flexible-array member
|
|
Pull cifs updates from Steve French:
"22 changesets, 2 for stable.
Includes big performance improvement for large i/o when using
multichannel, also includes DFS fixes"
* tag '5.8-rc-smb3-fixes-part-1' of git://git.samba.org/sfrench/cifs-2.6: (22 commits)
cifs: update internal module version number
cifs: multichannel: try to rebind when reconnecting a channel
cifs: multichannel: use pointer for binding channel
smb3: remove static checker warning
cifs: multichannel: move channel selection above transport layer
cifs: multichannel: always zero struct cifs_io_parms
cifs: dump Security Type info in DebugData
smb3: fix incorrect number of credits when ioctl MaxOutputResponse > 64K
smb3: default to minimum of two channels when multichannel specified
cifs: multichannel: move channel selection in function
cifs: fix minor typos in comments and log messages
smb3: minor update to compression header definitions
cifs: minor fix to two debug messages
cifs: Standardize logging output
smb3: Add new parm "nodelete"
cifs: move some variables off the stack in smb2_ioctl_query_info
cifs: reduce stack use in smb2_compound_op
cifs: get rid of unused parameter in reconn_setup_dfs_targets()
cifs: handle hostnames that resolve to same ip in failover
cifs: set up next DFS target before generic_ip_connect()
...
|
|
Pull AFS updates from David Howells:
"There's some core VFS changes which affect a couple of filesystems:
- Make the inode hash table RCU safe and providing some RCU-safe
accessor functions. The search can then be done without taking the
inode_hash_lock. Care must be taken because the object may be being
deleted and no wait is made.
- Allow iunique() to avoid taking the inode_hash_lock.
- Allow AFS's callback processing to avoid taking the inode_hash_lock
when using the inode table to find an inode to notify.
- Improve Ext4's time updating. Konstantin Khlebnikov said "For now,
I've plugged this issue with try-lock in ext4 lazy time update.
This solution is much better."
Then there's a set of changes to make a number of improvements to the
AFS driver:
- Improve callback (ie. third party change notification) processing
by:
(a) Relying more on the fact we're doing this under RCU and by
using fewer locks. This makes use of the RCU-based inode
searching outlined above.
(b) Moving to keeping volumes in a tree indexed by volume ID
rather than a flat list.
(c) Making the server and volume records logically part of the
cell. This means that a server record now points directly at
the cell and the tree of volumes is there. This removes an N:M
mapping table, simplifying things.
- Improve keeping NAT or firewall channels open for the server
callbacks to reach the client by actively polling the fileserver on
a timed basis, instead of only doing it when we have an operation
to process.
- Improving detection of delayed or lost callbacks by including the
parent directory in the list of file IDs to be queried when doing a
bulk status fetch from lookup. We can then check to see if our copy
of the directory has changed under us without us getting notified.
- Determine aliasing of cells (such as a cell that is pointed to be a
DNS alias). This allows us to avoid having ambiguity due to
apparently different cells using the same volume and file servers.
- Improve the fileserver rotation to do more probing when it detects
that all of the addresses to a server are listed as non-responsive.
It's possible that an address that previously stopped responding
has become responsive again.
Beyond that, lay some foundations for making some calls asynchronous:
- Turn the fileserver cursor struct into a general operation struct
and hang the parameters off of that rather than keeping them in
local variables and hang results off of that rather than the call
struct.
- Implement some general operation handling code and simplify the
callers of operations that affect a volume or a volume component
(such as a file). Most of the operation is now done by core code.
- Operations are supplied with a table of operations to issue
different variants of RPCs and to manage the completion, where all
the required data is held in the operation object, thereby allowing
these to be called from a workqueue.
- Put the standard "if (begin), while(select), call op, end" sequence
into a canned function that just emulates the current behaviour for
now.
There are also some fixes interspersed:
- Don't let the EACCES from ICMP6 mapping reach the user as such,
since it's confusing as to whether it's a filesystem error. Convert
it to EHOSTUNREACH.
- Don't use the epoch value acquired through probing a server. If we
have two servers with the same UUID but in different cells, it's
hard to draw conclusions from them having different epoch values.
- Don't interpret the argument to the CB.ProbeUuid RPC as a
fileserver UUID and look up a fileserver from it.
- Deal with servers in different cells having the same UUIDs. In the
event that a CB.InitCallBackState3 RPC is received, we have to
break the callback promises for every server record matching that
UUID.
- Don't let afs_statfs return values that go below 0.
- Don't use running fileserver probe state to make server selection
and address selection decisions on. Only make decisions on final
state as the running state is cleared at the start of probing"
Acked-by: Al Viro <viro@zeniv.linux.org.uk> (fs/inode.c part)
* tag 'afs-next-20200604' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: (27 commits)
afs: Adjust the fileserver rotation algorithm to reprobe/retry more quickly
afs: Show more a bit more server state in /proc/net/afs/servers
afs: Don't use probe running state to make decisions outside probe code
afs: Fix afs_statfs() to not let the values go below zero
afs: Fix the by-UUID server tree to allow servers with the same UUID
afs: Reorganise volume and server trees to be rooted on the cell
afs: Add a tracepoint to track the lifetime of the afs_volume struct
afs: Detect cell aliases 3 - YFS Cells with a canonical cell name op
afs: Detect cell aliases 2 - Cells with no root volumes
afs: Detect cell aliases 1 - Cells with root volumes
afs: Implement client support for the YFSVL.GetCellName RPC op
afs: Retain more of the VLDB record for alias detection
afs: Fix handling of CB.ProbeUuid cache manager op
afs: Don't get epoch from a server because it may be ambiguous
afs: Build an abstraction around an "operation" concept
afs: Rename struct afs_fs_cursor to afs_operation
afs: Remove the error argument from afs_protocol_error()
afs: Set error flag rather than return error from file status decode
afs: Make callback processing more efficient.
afs: Show more information in /proc/net/afs/servers
...
|
|
Pull ext4 updates from Ted Ts'o:
"A lot of bug fixes and cleanups for ext4, including:
- Fix performance problems found in dioread_nolock now that it is the
default, caused by transaction leaks.
- Clean up fiemap handling in ext4
- Clean up and refactor multiple block allocator (mballoc) code
- Fix a problem with mballoc with a smaller file systems running out
of blocks because they couldn't properly use blocks that had been
reserved by inode preallocation.
- Fixed a race in ext4_sync_parent() versus rename()
- Simplify the error handling in the extent manipulation code
- Make sure all metadata I/O errors are felected to
ext4_ext_dirty()'s and ext4_make_inode_dirty()'s callers.
- Avoid passing an error pointer to brelse in ext4_xattr_set()
- Fix race which could result to freeing an inode on the dirty last
in data=journal mode.
- Fix refcount handling if ext4_iget() fails
- Fix a crash in generic/019 caused by a corrupted extent node"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (58 commits)
ext4: avoid unnecessary transaction starts during writeback
ext4: don't block for O_DIRECT if IOCB_NOWAIT is set
ext4: remove the access_ok() check in ext4_ioctl_get_es_cache
fs: remove the access_ok() check in ioctl_fiemap
fs: handle FIEMAP_FLAG_SYNC in fiemap_prep
fs: move fiemap range validation into the file systems instances
iomap: fix the iomap_fiemap prototype
fs: move the fiemap definitions out of fs.h
fs: mark __generic_block_fiemap static
ext4: remove the call to fiemap_check_flags in ext4_fiemap
ext4: split _ext4_fiemap
ext4: fix fiemap size checks for bitmap files
ext4: fix EXT4_MAX_LOGICAL_BLOCK macro
add comment for ext4_dir_entry_2 file_type member
jbd2: avoid leaking transaction credits when unreserving handle
ext4: drop ext4_journal_free_reserved()
ext4: mballoc: use lock for checking free blocks while retrying
ext4: mballoc: refactor ext4_mb_good_group()
ext4: mballoc: introduce pcpu seqcnt for freeing PA to improve ENOSPC handling
ext4: mballoc: refactor ext4_mb_discard_preallocations()
...
|
Linus Torvalds
Zou Wei
Denis Efremov
Jonas Zeiger
ashimida
Masahiro Yamada
Erwan Velu