aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/Documentation/devicetree/bindings/mtd (follow)
AgeCommit message (Collapse)AuthorFilesLines
2020-04-02Merge tag 'devicetree-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds2-61/+148
Pull devicetree updates from Rob Herring: - Unit test for overlays with GPIO hogs - Improve dma-ranges parsing to handle dma-ranges with multiple entries - Update dtc to upstream version v1.6.0-2-g87a656ae5ff9 - Improve overlay error reporting - Device link support for power-domains and hwlocks bindings - Add vendor prefixes for Beacon, Topwise, ENE, Dell, SG Micro, Elida, PocketBook, Xiaomi, Linutronix, OzzMaker, Waveshare Electronics, and ITE Tech - Add deprecated Marvell vendor prefix 'mrvl' - A bunch of binding conversions to DT schema continues. Of note, the common serial and USB connector bindings are converted. - Add more Arm CPU compatibles - Drop Mark Rutland as DT maintainer :( * tag 'devicetree-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (106 commits) MAINTAINERS: drop an old reference to stm32 pwm timers doc MAINTAINERS: dt: update etnaviv file reference dt-bindings: usb: dwc2: fix bindings for amlogic, meson-gxbb-usb dt-bindings: uniphier-system-bus: fix warning in the example dt-bindings: display: meson-vpu: fix indentation of reg-names' "items" dt-bindings: iio: Fix adi, ltc2983 uint64-matrix schema constraints dt-bindings: power: Fix example for power-domain dt-bindings: arm: Add some constraints for PSCI nodes of: some unittest overlays not untracked of: gpio unittest kfree() wrong object dt-bindings: phy: convert phy-rockchip-inno-usb2 bindings to yaml dt-bindings: serial: sh-sci: Convert to json-schema dt-bindings: serial: Document serialN aliases dt-bindings: thermal: tsens: Set 'additionalProperties: false' dt-bindings: thermal: tsens: Fix nvmem-cell-names schema dt-bindings: vendor-prefixes: Add Beacon vendor prefix dt-bindings: vendor-prefixes: Add Topwise of: of_private.h: Replace zero-length array with flexible-array member docs: dt: fix a broken reference to input.yaml docs: dt: fix references to ap806-system-controller.txt ...
2020-04-02Merge tag 'mtd/for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linuxLinus Torvalds2-5/+32
Pull MTD updates from Miquel Raynal: "MTD core changes: - Fix issue where write_cached_data() fails but write() still returns success - maps: sa1100-flash: Replace zero-length array with flexible-array member - phram: Fix a double free issue in error path - Convert fallthrough comments into statements - MAINTAINERS: Add the IRC channel to the MTD related subsystems Raw NAND core changes: - Add support for manufacturer specific suspend/resume operation - Add support for manufacturer specific lock/unlock operation - Replace zero-length array with flexible-array member - Fix a typo ("manufecturer") - Ensure nand_soft_waitrdy wait period is enough Raw NAND controller driver changes: - Brcmnand: * Add support for flash-edu for dma transfers (+ bindings) - Cadence: * Reinit completion before executing a new command * Change bad block marker size * Fix the calculation of the avaialble OOB size * Get meta data size from registers - Qualcom: * Use dma_request_chan() instead dma_request_slave_channel() * Release resources on failure within qcom_nandc_alloc() - Allwinner: * Use dma_request_chan() instead dma_request_slave_channel() - Marvell: * Use dma_request_chan() instead dma_request_slave_channel() * Release DMA channel on error - Freescale: * Use dma_request_chan() instead dma_request_slave_channel() - Macronix: * Add support for Macronix NAND randomizer (+ bindings) - Ams-delta: * Rename structures and functions to gpio_nand* * Make the driver custom I/O ready * Drop useless local variable * Support custom driver initialisation * Add module device tables * Handle more GPIO pins as optional * Make read pulses optional * Don't hardcode read/write pulse widths * Push inversion handling to gpiolib * Enable OF partition info support * Drop board specific partition info * Use struct gpio_nand_platdata * Write protect device during probe - Ingenic: * Use devm_platform_ioremap_resource() * Add dependency on MIPS || COMPILE_TEST - Denali: * Deassert write protect pin - ST: * Use dma_request_chan() instead dma_request_slave_channel() Raw NAND chip driver changes: - Toshiba: * Support reading the number of bitflips for BENAND (Built-in ECC NAND) - Macronix: * Add support for deep power down mode * Add support for block protection SPI-NAND core changes: - Do not erase the block before writing a bad block marker - Explicitly use MTD_OPS_RAW to write the bad block marker to OOB - Stop using spinand->oobbuf for buffering bad block markers - Rework detect procedure for different READ_ID operation SPI-NAND driver changes: - Toshiba: * Support for new Kioxia Serial NAND * Rename function name to change suffix and prefix (8Gbit) * Add comment about Kioxia ID - Micron: * Add new Micron SPI NAND devices with multiple dies * Add M70A series Micron SPI NAND devices * identify SPI NAND device with Continuous Read mode * Add new Micron SPI NAND devices * Describe the SPI NAND device MT29F2G01ABAGD * Generalize the OOB layout structure and function names SPI NOR core changes: - Move all the manufacturer specific quirks/code out of the core, to make the core logic more readable and thus ease maintenance. - Move the SFDP logic out of the core, it provides a better separation between the SFDP parsing and core logic. - Trim what is exposed in spi-nor.h. The SPI NOR controllers drivers must not be able to use structures that are meant just for the SPI NOR core. - Use the spi-mem direct mapping API to let advanced controllers optimize the read/write operations when they support direct mapping. - Add generic formula for the Status Register block protection handling. It fixes some long standing locking limitations and eases the addition of the 4bit block protection support. - Add block protection support for flashes with 4 block protection bits in the Status Register. SPI NOR controller drivers changes: - The mtk-quadspi driver is replaced by the new spi-mem spi-mtk-nor driver. - Merge tag 'mtk-mtd-spi-move' into spi-nor/next to avoid conflicts. HyperBus changes: - Print error msg when compatible is wrong or missing - Move mapping of direct access window from core to individual drivers" * tag 'mtd/for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (103 commits) mtd: Convert fallthrough comments into statements mtd: rawnand: toshiba: Support reading the number of bitflips for BENAND (Built-in ECC NAND) MAINTAINERS: Add the IRC channel to the MTD related subsystems mtd: Fix issue where write_cached_data() fails but write() still returns success mtd: maps: sa1100-flash: Replace zero-length array with flexible-array member mtd: phram: fix a double free issue in error path mtd: spinand: toshiba: Support for new Kioxia Serial NAND mtd: spinand: toshiba: Rename function name to change suffix and prefix (8Gbit) mtd: rawnand: macronix: Add support for deep power down mode mtd: rawnand: Add support for manufacturer specific suspend/resume operation mtd: spi-nor: Enable locking for n25q512ax3/n25q512a mtd: spi-nor: Add SR 4bit block protection support mtd: spi-nor: Add generic formula for SR block protection handling mtd: spi-nor: Set all BP bits to one when lock_len == mtd->size mtd: spi-nor: controllers: aspeed-smc: Replace zero-length array with flexible-array member mtd: spi-nor: Clear WEL bit when erase or program errors occur MAINTAINERS: update entry after SPI NOR controller move mtd: spi-nor: Trim what is exposed in spi-nor.h mtd: spi-nor: Drop the MFR definitions mtd: spi-nor: Get rid of the now empty spi_nor_ids[] table ...
2020-03-30Merge tag 'nand/for-5.7' into mtd/nextMiquel Raynal2-5/+32
Raw NAND core changes: * Add support for manufacturer specific suspend/resume operation * Add support for manufacturer specific lock/unlock operation * Replace zero-length array with flexible-array member * Fix a typo ("manufecturer") * Ensure nand_soft_waitrdy wait period is enough Raw NAND controller driver changes: * Brcmnand: Add support for flash-edu for dma transfers (+ bindings) * Cadence: Reinit completion before executing a new command Change bad block marker size Fix the calculation of the avaialble OOB size Get meta data size from registers * Qualcom: Use dma_request_chan() instead dma_request_slave_channel() Release resources on failure within qcom_nandc_alloc() * Allwinner: Use dma_request_chan() instead dma_request_slave_channel() * Marvell: Use dma_request_chan() instead dma_request_slave_channel() Release DMA channel on error * Freescale: Use dma_request_chan() instead dma_request_slave_channel() * Macronix: Add support for Macronix NAND randomizer (+ bindings) * Ams-delta: Rename structures and functions to gpio_nand* Make the driver custom I/O ready Drop useless local variable Support custom driver initialisation Add module device tables Handle more GPIO pins as optional Make read pulses optional Don't hardcode read/write pulse widths Push inversion handling to gpiolib Enable OF partition info support Drop board specific partition info Use struct gpio_nand_platdata Write protect device during probe * Ingenic: Use devm_platform_ioremap_resource() Add dependency on MIPS || COMPILE_TEST * Denali: Deassert write protect pin * ST: Use dma_request_chan() instead dma_request_slave_channel() Raw NAND chip driver changes: * Toshiba: Support reading the number of bitflips for BENAND (Built-in ECC NAND) * Macronix: Add support for deep power down mode Add support for block protection SPI-NAND core changes: * Do not erase the block before writing a bad block marker * Explicitly use MTD_OPS_RAW to write the bad block marker to OOB * Stop using spinand->oobbuf for buffering bad block markers * Rework detect procedure for different READ_ID operation SPI-NAND driver changes: * Toshiba: Support for new Kioxia Serial NAND Rename function name to change suffix and prefix (8Gbit) Add comment about Kioxia ID * Micron: Add new Micron SPI NAND devices with multiple dies Add M70A series Micron SPI NAND devices identify SPI NAND device with Continuous Read mode Add new Micron SPI NAND devices Describe the SPI NAND device MT29F2G01ABAGD Generalize the OOB layout structure and function names
2020-03-27Merge branch 'spi-5.7' into spi-nextMark Brown1-50/+0
2020-03-11dt-bindings: convert mtk-quadspi binding doc for spi-mtk-norChuanhong Guo1-50/+0
spi-mtk-nor is a driver to replace mtk-quadspi and they have almost the same device-tree bindings. Reuse this binding documentation and convert it for new driver: 1. "Mediatek SoCs" -> "Mediatek ARM SoCs" because MTK MIPS SoCs use different controllers. 2. document "interrupts" as a required property because it's available on all SoCs with this controller and new driver takes advantages of it. It's implemented as optional only to maintain backward compatibility. 3. add a dummy interrupt binding in example. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Link: https://lore.kernel.org/r/20200306085052.28258-4-gch981213@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-11dt: bindings: brcmnand: Add support for flash-eduKamal Dasu1-5/+5
Adding support for EBI DMA unit (EDU). Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200122213313.35820-2-kdasu.kdev@gmail.com
2020-03-11dt-bindings: mtd: Document Macronix NAND device bindingsMason Yang1-0/+27
Document the bindings used by the Macronix NAND device. Signed-off-by: Mason Yang <masonccyang@mxic.com.tw> Reviewed-by: Rob Herring <robh@kernel.org> [<miquel.raynal@bootlin.com: Fix typos] Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/1581922600-25461-3-git-send-email-masonccyang@mxic.com.tw
2020-03-10Merge branch 'dt/linus' into dt/nextRob Herring1-1/+1
2020-02-27dt-bindings: mtd: Convert Denali NAND controller to json-schemaMasahiro Yamada2-61/+148
Convert the Denali NAND controller binding to DT schema format. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Rob Herring <robh@kernel.org>
2020-02-24docs: dt: fix several broken doc referencesMauro Carvalho Chehab1-1/+1
There are several DT doc references that require manual fixes. I found 3 cases fixed on this patch: - directory named "binding/" instead of "bindings/"; - .txt to .yaml renames; - file renames (still on txt format); Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org>
2020-02-08Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds1-0/+1
Pull ARM Device-tree updates from Olof Johansson: "New SoCs: - Atmel/Microchip SAM9X60 (ARM926 SoC) - OMAP 37xx gets split into AM3703/AM3715/DM3725, who are all variants of it with different GPU/media IP configurations. - ST stm32mp15 SoCs (1-2 Cortex-A7, CAN, GPU depending on SKU) - ST Ericsson ab8505 (variant of ab8500) and db8520 (variant of db8500) - Unisoc SC9863A SoC (8x Cortex-A55 mobile chipset w/ GPU, modem) - Qualcomm SC7180 (8-core 64bit SoC, unnamed CPU class) New boards: - Allwinner: + Emlid Neutis SoM (H3 variant) + Libre Computer ALL-H3-IT + PineH64 Model B - Amlogic: + Libretech Amlogic GX PC (s905d and s912-based variants) - Atmel/Microchip: + Kizboxmini, sam9x60 EK, sama5d27 Wireless SOM (wlsom1) - Marvell: + Armada 385-based SolidRun Clearfog GTR - NXP: + Gateworks GW59xx boards based on i.MX6/6Q/6QDL + Tolino Shine 3 eBook reader (i.MX6sl) + Embedded Artists COM (i.MX7ULP) + SolidRun CLearfog CX/ITX and HoneyComb (LX2160A-based systems) + Google Coral Edge TPU (i.MX8MQ) - Rockchip: + Radxa Dalang Carrier (supports rk3288 and rk3399 SOMs) + Radxa Rock Pi N10 (RK3399Pro-based) + VMARC RK3399Pro SOM - ST: + Reference boards for stm32mp15 - ST Ericsson: + Samsung Galaxy S III mini (GT-I8190) + HREF520 reference board for DB8520 - TI OMAP: + Gen1 Amazon Echo (OMAP3630-based) - Qualcomm: + Inforce 6640 Single Board Computer (msm8996-based) + SC7180 IDP (SC7180-based)" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (623 commits) dt-bindings: fix compilation error of the example in marvell,mmp3-hsic-phy.yaml arm64: dts: ti: k3-am654-base-board: Add CSI2 OV5640 camera arm64: dts: ti: k3-am65-main Add CAL node arm64: dts: ti: k3-j721e-main: Add McASP nodes arm64: dts: ti: k3-am654-main: Add McASP nodes arm64: dts: ti: k3-j721e: DMA support arm64: dts: ti: k3-j721e-main: Move secure proxy and smmu under main_navss arm64: dts: ti: k3-j721e-main: Correct main NAVSS representation arm64: dts: ti: k3-j721e: Correct the address for MAIN NAVSS arm64: dts: ti: k3-am65: DMA support arm64: dts: ti: k3-am65-main: Move secure proxy under cbass_main_navss arm64: dts: ti: k3-am65-main: Correct main NAVSS representation ARM: dts: aspeed: rainier: Add UCD90320 power sequencer ARM: dts: aspeed: rainier: Switch PSUs to unknown version arm64: dts: rockchip: Kill off "simple-panel" compatibles ARM: dts: rockchip: Kill off "simple-panel" compatibles arm64: dts: rockchip: rename dwmmc node names to mmc ARM: dts: rockchip: rename dwmmc node names to mmc arm64: dts: exynos: Rename Samsung and Exynos to lowercase arm64: dts: uniphier: add reset-names to NAND controller node ...
2020-01-21dt-bindings: mtd: denali_dt: document reset propertyMasahiro Yamada1-0/+7
According to the Denali NAND Flash Memory Controller User's Guide, this IP has two reset signals. rst_n: reset most of FFs in the controller core reg_rst_n: reset all FFs in the register interface, and in the initialization sequencer This commit specifies these reset signals. It is possible to control them separately from the IP point of view although they might be often tied up together in actual SoC integration. At least for the upstream platforms, Altera/Intel SOCFPGA and Socionext UniPhier, the reset controller seems to provide only 1-bit control for the NAND controller. If it is the case, the resets property should reference to the same phandles for "nand" and "reg" resets, like this: resets = <&nand_rst>, <&nand_rst>; reset-names = "nand", "reg"; Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2020-01-19Merge tag 'at91-5.6-dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dtOlof Johansson1-0/+1
AT91 DT for 5.6 #2 - Add sam9x60 dtsi - New board sam9x60 Evaluation Kit * tag 'at91-5.6-dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: at91: sam9x60: add device tree for soc and board dt-bindings: arm: add sam9x60-ek board dt-bindings: atmel-gpbr: add microchip,sam9x60-gpbr dt-bindings: atmel-smc: add microchip,sam9x60-smc dt-bindings: atmel-sysreg: add microchip,sam9x60-ddramc dt-bindings: atmel-nand: add microchip,sam9x60-pmecc dt-bindings: atmel-matrix: add microchip,sam9x60-matrix dt-bindings: at91-sama5d2_adc: add microchip,sam9x60-adc dt-bindings: atmel-isi: add microchip,sam9x60-isi dt-bindings: atmel-can: add microchip,sam9x60-can dt-bindings: at_xdmac: add microchip,sam9x60-dma dt-bindings: at_xdmac: remove wildcard Link: https://lore.kernel.org/r/20200119234707.GA90094@piout.net Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-14dt-bindings: atmel-nand: add microchip,sam9x60-pmeccClaudiu Beznea1-0/+1
Add microchip,sam9x60-pmecc to DT bindings documentation. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1578673089-3484-9-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-12-12dt-bindings: Change maintainer addressMaxime Ripard1-1/+1
While my email address has changed for a while, all the schemas I contributed still have the old one unfortunately. Update it. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Rob Herring <robh@kernel.org>
2019-12-02Merge tag 'devicetree-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds2-61/+98
Pull Devicetree updates from Rob Herring: - DT schemas for PWM, syscon, power domains, SRAM, syscon-reboot, syscon-poweroff, renesas-irqc, simple-pm-bus, renesas-bsc, pwm-rcar, Renesas tpu, at24 eeprom, rtc-sh, Allwinner PS/2, sharp,ld-d5116z01b panel, Arm SMMU, max77650, Meson CEC, Amlogic canvas and DWC3 glue, Allwinner A10 mUSB and CAN, TI Davinci MDIO, QCom QCS404 interconnect, Unisoc/Spreadtrum SoCs and UART - Convert a bunch of Samsung bindings to DT schema - Convert a bunch of ST stm32 bindings to DT schema - Realtek and Exynos additions to Arm Mali bindings - Fix schema errors in RiscV CPU schema - Various schema fixes from improved meta-schema checks - Improve the handling of 'dma-ranges' and in particular fix DMA mask setup on PCI bridges - Fix a memory leak in add_changeset_property() and DT unit tests. - Several documentation improvements for schema validation - Rework build rules to improve schema validation errors - Color output for dtx_diff * tag 'devicetree-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (138 commits) libfdt: define INT32_MAX and UINT32_MAX in libfdt_env.h dt-bindings: arm: Remove leftover axentia.txt of: unittest: fix memory leak in attach_node_and_children of: overlay: add_changeset_property() memory leak dt-bindings: interrupt-controller: arm,gic-v3: Add missing type to interrupt-partition-* nodes dt-bindings: firmware: ixp4xx: Drop redundant minItems/maxItems dt-bindings: power: Rename back power_domain.txt bindings to fix references dt-bindings: i2c: stm32: Migrate i2c-stm32 documentation to yaml dt-bindings: mtd: Convert stm32 fmc2-nand bindings to json-schema dt-bindings: remoteproc: convert stm32-rproc to json-schema dt-bindings: mailbox: convert stm32-ipcc to json-schema dt-bindings: mfd: Convert stm32 low power timers bindings to json-schema dt-bindings: interrupt-controller: Convert stm32-exti to json-schema dt-bindings: crypto: Convert stm32 HASH bindings to json-schema dt-bindings: rng: Convert stm32 RNG bindings to json-schema dt-bindings: pwm: Convert Samsung PWM bindings to json-schema dt-bindings: pwm: Convert PWM bindings to json-schema dt-bindings: serial: Add a new compatible string for SC9863A dt-bindings: serial: Convert sprd-uart to json-schema dt-bindings: arm: Add bindings for Unisoc SC9863A ...
2019-11-21dt-bindings: mtd: Convert stm32 fmc2-nand bindings to json-schemaBenjamin Gaignard2-61/+98
Convert the STM32 fmc2-nand binding to DT schema format using json-schema Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> CC: Christophe Kerello <christophe.kerello@st.com> Signed-off-by: Rob Herring <robh@kernel.org>
2019-11-17Merge tag 'nand/for-5.5' into mtd/nextMiquel Raynal1-0/+53
Raw NAND core * Useless extra checks dropped. * Updated the detection of the bad block markers position Raw NAND controller drivers: * Cadence : New driver * Brcmnand: Support for flash-dma v0 + fixes * Denali : Support for the legacy controller/chip DT representation dropped * Superfluous dev_err() calls removed
2019-10-29mtd: add DT bindings for the Intel IXP4xx FlashLinus Walleij1-0/+22
This adds device tree bindings for the Intel IXP4xx flash controller, a simple physmap which however need a specific big-endian or mixed-endian access pattern to the memory. Cc: devicetree@vger.kernel.org Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-10-04dt-bindings: mtd: Add Cadence NAND controller driverPiotr Sroka1-0/+53
Document the bindings used by Cadence NAND controller driver Signed-off-by: Piotr Sroka <piotrs@cadence.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-08-26dt-bindings: mtd: Document Macronix raw NAND controller bindingsMason Yang1-0/+36
Document the bindings used by the Macronix raw NAND controller. Signed-off-by: Mason Yang <masonccyang@mxic.com.tw> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-07-20dt-bindings: Ensure child nodes are of type 'object'Rob Herring2-0/+2
Properties which are child node definitions need to have an explict type. Otherwise, a matching (DT) property can silently match when an error is desired. Fix this up tree-wide. Once this is fixed, the meta-schema will enforce this on any child node definitions. Cc: Chen-Yu Tsai <wens@csie.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Richard Weinberger <richard@nod.at> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: linux-mtd@lists.infradead.org Cc: linux-gpio@vger.kernel.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-spi@vger.kernel.org Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Rob Herring <robh@kernel.org>
2019-07-13Merge tag 'mtd/for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linuxLinus Torvalds5-45/+72
Pull MTD updates from Miquel Raynal: "This contains the following changes for MTD: MTD core changes: - New Hyperbus framework - New _is_locked (concat) implementation - Various cleanups NAND core changes: - use longest matching pattern in ->exec_op() default parser - export NAND operation tracer - add flag to indicate panic_write in MTD - use kzalloc() instead of kmalloc() and memset() Raw NAND controller drivers changes: - brcmnand: - fix BCH ECC layout for large page NAND parts - fallback to detected ecc-strength, ecc-step-size - when oops in progress use pio and interrupt polling - code refactor code to introduce helper functions - add support for v7.3 controller - FSMC: - use nand_op_trace for operation tracing - GPMI: - move all driver code into single file - various cleanups (including dmaengine changes) - use runtime PM to manage clocks - implement exec_op - MTK: - correct low level time calculation of r/w cycle - improve data sampling timing for read cycle - add validity check for CE# pin setting - fix wrongly assigned OOB buffer pointer issue - re-license MTK NAND driver as Dual MIT/GPL - STM32: - manage the get_irq error case - increase DMA completion timeouts Raw NAND chips drivers changes: - Macronix: add read-retry support Onenand driver changes: - add support for 8Gb datasize chips - avoid fall-through warnings SPI-NAND changes: - define macros for page-read ops with three-byte addresses - add support for two-byte device IDs and then for GigaDevice GD5F1GQ4UFxxG - add initial support for Paragon PN26G0xA - handle the case where the last page read has bitflips SPI-NOR core changes: - add support for the mt25ql02g and w25q16jv flashes - print error in case of jedec read id fails - is25lp256: add post BFPT fix to correct the addr_width SPI NOR controller drivers changes: - intel-spi: Add support for Intel Elkhart Lake SPI serial flash - smt32: remove the driver as the driver was replaced by spi-stm32-qspi.c - cadence-quadspi: add reset control" * tag 'mtd/for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (60 commits) mtd: concat: implement _is_locked mtd operation mtd: concat: refactor concat_lock/concat_unlock mtd: abi: do not use C++ style comments in uapi header mtd: afs: remove unneeded NULL check mtd: rawnand: stm32_fmc2: increase DMA completion timeouts mtd: rawnand: Use kzalloc() instead of kmalloc() and memset() mtd: hyperbus: Add driver for TI's HyperBus memory controller mtd: spinand: read returns badly if the last page has bitflips mtd: spinand: Add initial support for Paragon PN26G0xA mtd: rawnand: mtk: Re-license MTK NAND driver as Dual MIT/GPL mtd: rawnand: gpmi: remove double assignment to block_size dt-bindings: mtd: brcmnand: Add brcmnand, brcmnand-v7.3 support mtd: rawnand: brcmnand: Add support for v7.3 controller mtd: rawnand: brcmnand: Refactored code to introduce helper functions mtd: rawnand: brcmnand: When oops in progress use pio and interrupt polling mtd: Add flag to indicate panic_write mtd: rawnand: Add Macronix NAND read retry support mtd: onenand: Avoid fall-through warnings mtd: spinand: Add support for GigaDevice GD5F1GQ4UFxxG mtd: spinand: Add support for two-byte device IDs ...
2019-07-07Merge tag 'spi-nor/for-5.3-v2' of gitolite.kernel.org:pub/scm/linux/kernel/git/mtd/linux into mtd/nextMiquel Raynal2-43/+5
SPI-NOR core changes: - add support for the mt25ql02g and w25q16jv flashes - print error in case of jedec read id fails - is25lp256: add post BFPT fix to correct the addr_width SPI NOR controller drivers changes: - intel-spi: Add support for Intel Elkhart Lake SPI serial flash - smt32: remove the driver as the driver was replaced by spi-stm32-qspi.c - cadence-quadspi: add reset control
2019-07-06Merge tag 'nand/for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/nextRichard Weinberger15-39/+40
NAND core changes: - use longest matching pattern in ->exec_op() default parser - export NAND operation tracer - add flag to indicate panic_write in MTD - use kzalloc() instead of kmalloc() and memset() Raw NAND controller drivers changes: - brcmnand: * fix BCH ECC layout for large page NAND parts * fallback to detected ecc-strength, ecc-step-size * when oops in progress use pio and interrupt polling * code refactor code to introduce helper functions * add support for v7.3 controller - FSMC: * use nand_op_trace for operation tracing - GPMI: * move all driver code into single file * various cleanups (including dmaengine changes) * use runtime PM to manage clocks * implement exec_op - MTK: * correct low level time calculation of r/w cycle * improve data sampling timing for read cycle * add validity check for CE# pin setting * fix wrongly assigned OOB buffer pointer issue * re-license MTK NAND driver as Dual MIT/GPL - STM32: * manage the get_irq error case * increase DMA completion timeouts Raw NAND chips drivers changes: - Macronix: add read-retry support Onenand driver changes: - add support for 8Gb datasize chips - avoid fall-through warnings SPI-NAND changes: - define macros for page-read ops with three-byte addresses - add support for two-byte device IDs and then for GigaDevice GD5F1GQ4UFxxG - add initial support for Paragon PN26G0xA - handle the case where the last page read has bitflips
2019-06-28dt-bindings: mtd: sunxi-nand: Drop 'maxItems' from child 'reg' propertyRob Herring1-1/+0
Mixing 'maxItems' and scalar properties doesn't make much sense, so drop 'maxItems' as a single item is implied. Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Richard Weinberger <richard@nod.at> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: linux-mtd@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Rob Herring <robh@kernel.org>
2019-06-27dt-bindings: mtd: brcmnand: Add brcmnand, brcmnand-v7.3 supportKamal Dasu1-0/+1
Added brcm,brcmnand-v7.3 as possible compatible string to support brcmnand controller v7.3. Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27dt-bindings: mtd: brcmnand: Make nand-ecc-strength and nand-ecc-step-size optionalKamal Dasu1-2/+2
nand-ecc-strength and nand-ecc-step-size can be made optional as brcmnand driver can support using raw NAND layer detected values. Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27dt-bindings: mtd: Add bindings for TI's AM654 HyperBus memory controllerVignesh Raghavendra1-0/+51
Add binding documentation for TI's HyperBus memory controller present on AM654 SoC. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27dt-bindings: mtd: Add binding documentation for HyperFlashVignesh Raghavendra1-0/+13
Add DT binding documentation for HyperFlash devices. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27dt-bindings: cadence-quadspi: add options reset propertyDinh Nguyen1-0/+5
The QSPI module can have an optional reset signals that will hold the module in a reset state. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2019-06-07mtd: spi-nor: stm32: remove the driver as it was replaced by spi-stm32-qspi.cLudovic Barre1-43/+0
There's a new driver using the SPI memory interface of the SPI framework at spi/spi-stm32-qspi.c, which can be used together with m25p80.c to replace the functionality of this SPI NOR driver. The "new" driver uses the same dt properties and not affects the legacy compatibility. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2019-05-22dt: bindings: mtd: replace references to nand.txt with nand-controller.yamlKamal Dasu15-39/+39
nand-controller.yaml replaced nand.txt however the references to it were not updated. This change updates these references wherever it appears in bindings documentation. Fixes: 212e49693592 ("dt-bindings: mtd: Add YAML schemas for the generic NAND options") Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
2019-05-06mtd: partitions: Add AFS partitions DT bindingsLinus Walleij1-0/+17
This adds device tree bindings for ARM Firmware Suite flash partitioning used in NOR flashes on ARM reference designs. Cc: devicetree@vger.kernel.org Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-05-06dt-binding: mtd: physmap: Add example using addr-gpios propertyChris Packham1-0/+16
Add an example showing how to use the addr-gpios property to deal with a system with limited IO space. Cc: devicetree@vger.kernel.org Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-05-06dt-bindings: mtd: describe BCM963XX ImageTag format and usageJonas Gorski1-0/+45
Describe how to use the BCM963XX ImageTag format in a mixed flash layout environment. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-05-06dt-bindings: mtd: describe the simple BCM963XX NOR flash layoutJonas Gorski1-0/+24
Add binding documentation for the standard CFE based BCM963XX flash layout, found in most devices using a BCM63XX SoC with NOR flash. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-04-18dt-bindings: mtd: sunxi: Add new compatibleMiquel Raynal1-2/+3
The A23/A33 NAND controller is slightly different than the A10+ ones, eg. DMA handling is a bit different and a few register offsets changed. Introduce a new compatible to represent this version of the IP. Also append '-controller' to the new compatible (which is required for new compatibles) as this is describing a NAND controller and not a NAND chip. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-04-18dt-bindings: mtd: sunxi-nand: Add YAML schemasMaxime Ripard2-48/+96
Switch the DT binding to a YAML schema to enable the DT validation. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-04-18dt-bindings: mtd: Add YAML schemas for the generic NAND optionsMaxime Ripard2-75/+143
The NAND chips in MTD have a bunch of generic options that are needed in a device tree. Add a YAML schemas for those. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-04-18mtd: rawnand: denali: decouple controller and NAND chipsMasahiro Yamada1-13/+27
Currently, this driver sticks to the legacy NAND model because it was upstreamed before commit 2d472aba15ff ("mtd: nand: document the NAND controller/NAND chip DT representation"). However, relying on the dummy_controller is already deprecated. Switch over to the new controller/chip representation. The struct denali_nand_info has been split into denali_controller and denali_chip, to contain the controller data, per-chip data, respectively. One problem is, this commit changes the DT binding. So, as always, the backward compatibility must be taken into consideration. In the new binding, the controller node expects #address-cells = <1>; #size-cells = <0>; ... since the child nodes represent NAND chips. In the old binding, the controller node may have subnodes, but they are MTD partitions. The denali_dt_is_legacy_binding() exploits it to distinguish old/new platforms. Going forward, the old binding is only allowed for existing DT files. I updated the binding document. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-03-21dt-bindings: mtd: ingenic: Use standard ecc-engine propertyPaul Cercueil1-2/+2
The 'ingenic,bch-controller' property is now deprecated and the 'ecc-engine' property should be used instead. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-03-21dt-bindings: mtd: ingenic: Change 'BCH' to 'ECC' in documentationPaul Cercueil1-9/+9
The JZ4740 ECC hardware is not BCH but Reed-Solomon, so it makes more sense to use the more generic ECC term. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-03-21dt-bindings: mtd: ingenic: Add compatible strings for JZ4740 and JZ4725BPaul Cercueil1-2/+8
Add compatible strings to probe the jz4780-nand and jz4780-bch drivers from devicetree on the JZ4725B and JZ4740 SoCs from Ingenic. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-03-21dt-bindings: mtd: atmel-nand: add sam9x60 compatibleTudor Ambarus1-0/+1
Add compatibility string for the sam9x60 nand controller. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-03-04Merge tag 'spi-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spiLinus Torvalds1-65/+0
Pull spi updates from Mark Brown: "A fairly quiet release for SPI, the biggest thing is the conversion to use GPIO descriptors which is now 90% done but still needs some stragglers converting. Summary: - Support for inter-word delays - Conversion of the core and most drivers to use GPIO descriptors for GPIO controlled chip selects - New drivers for NXP FlexSPI and QuadSPI, SiFive and Spreadtrum" * tag 'spi-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (104 commits) spi: sh-msiof: Restrict bits per word to 8/16/24/32 on R-Car Gen2/3 spi: sifive: Remove redundant dev_err call in sifive_spi_probe() spi: sifive: Remove spi_master_put in sifive_spi_remove() spi: spi-gpio: fix SPI_CS_HIGH capability spi: pxa2xx: Setup maximum supported DMA transfer length spi: sifive: Add driver for the SiFive SPI controller spi: sifive: Add DT documentation for SiFive SPI controller spi: sprd: Add a prefix for SPI DMA channel macros spi: sprd: spi: sprd: Add DMA mode support dt-bindings: spi: Add the DMA properties for the SPI dma mode spi: sprd: Add the SPI irq function for the SPI DMA mode dt-bindings: spi: imx: Add an entry for the i.MX8QM compatible spi: use gpio[d]_set_value_cansleep for setting chipselect GPIO spi: gpio: Advertise support for SPI_CS_HIGH spi: sh-msiof: Replace spi_master by spi_controller spi: sh-hspi: Replace spi_master by spi_controller spi: rspi: Replace spi_master by spi_controller spi: atmel-quadspi: add support for sam9x60 qspi controller dt-bindings: spi: atmel-quadspi: QuadSPI driver for Microchip SAM9X60 spi: atmel-quadspi: add support for named peripheral clock ...
2019-02-25Merge tag 'nand/for-5.1' of git://git.infradead.org/linux-mtd into mtd/nextBoris Brezillon2-0/+121
NAND core changes: - Fourth batch of fixes/cleanup to the raw NAND core impacting various controller drivers (Sunxi, Marvell, MTK, TMIO, OMAP2). - Checking the return code of nand_reset() and nand_readid_op(). - Removing ->legacy.erase and single_erase(). - Simplifying the locking. - Several implicit fall through annotations. Raw NAND controllers drivers changes: - Fixing various possible object reference leaks (MTK, JZ4780, Atmel). - ST: * Adding support for STM32 FMC2 NAND flash controller. - Meson: * Adding support for Amlogic NAND flash controller. - Denali: * Several cleanup patches. - Sunxi: * Several cleanup patches. - FSMC: * Disabling NAND on remove(). * Resetting NAND timings on resume(). SPI-NAND drivers changes: - Toshiba: * Adding support for all Toshiba products. - Macronix: * Fixing ECC status read. - Gigadevice: * Adding support for GD5F1GQ4UExxG.
2019-02-13dt-bindings: cadence-quadspi: Add new compatible for AM654 SoCVignesh R1-0/+1
AM654 SoC has Cadence Octal SPI controller, which is similar to Cadence QSPI controller but supports Octal IO(x8 data lines) and Double Data Rate(DDR) mode. Add new compatible to support OSPI controller on TI's AM654 SoCs. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
2019-02-05dt-bindings: nand: meson: add Amlogic NAND controller driverLiang Yang1-0/+60
Add Amlogic NAND controller dt-bindings for Meson SoC, Current this driver support GXBB/GXL/AXG platform. Signed-off-by: Liang Yang <liang.yang@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-01-16dt-bindings: mtd: mtk-quadspi: update bindings for MT7629 SoCRyder Lee1-1/+2
This updates bindings for the MT7629 SPI-NOR controller. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.