| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull networking updates from Jakub Kicinski:
"One of the 'small improvements all over the place' releases for us.
It's hard to draw any direct comparisons because summer vacations
disrupted our patch processing (and presumably - generation) quite a
bit.
Quick and dirty count suggests we (Paolo and I) merged a very similar
number of net (632) and net-next (648) patches. This is not telling
the full story either because 1/3 to 1/2 of the net-next patches also
*seem* like AI-driven low priority fixes, cleanups and clarifications.
We are completely overwhelmed, of course. The glimmer of hope is that
we secured sufficient LLM budget and access (thank you Meta!) to run
reviews with multiple frontier models on each patch. This eliminates
some hallucinations. That said, in terms of review, the LLMs can only
do so much.
The sad truth is that our APIs (especially for rare events like PCIe
errors, timeouts etc) have always been racy, and now LLMs don't let us
ignore that. I expect our direction for the next release will be to
tweak the reviews a little bit more, but start shifting focus to
letting the LLMs take care of the busy work - managing patchwork,
automating common process complaints, editing commit messages, and
maybe applying patches which already got "reviewed-by" tags from
people we trust...
Core & protocols:
- A few steps lowering rtnl_lock dependence:
- per-netns netdev unregistration for select SW drivers (e.g.
veth, ipvlan, tunnels)
- rtnl_lock-less FIB rule changes (RTM_NEWRULE and RTM_DELRULE)
- prepare software drivers and TC qdiscs for rtnl_lock-less GET
- Support BIG TCP (>64kB TSO) in UDP tunnels (vxlan, geneve)
- Support buffers larger than PAGE_SIZE in devmem zero-copy API
- Improve MPTCP handling of extreme memory pressure handling, when
out-of-order queue had to be pruned
- Report the per-group user count via RTM_GETMULTICAST
- Expose the route deletion reason in RTM_DELROUTE
- Add a SO_RIGHTS_NOTRUNC option to UNIX sockets to enable more
useful handling of LSM denials when receiving SCM_RIGHTS messages:
instead of truncating the message at the first blocked fd, keep
every fd slot and store the LSM errno in the blocked slot
- IPv6 Segment Routing - support looking up the post-encap SID
(address) in a different/specified routing table
- Support PRP RedBox (interlink) creation
- Support per-nexthop UDP dst port in VXLAN
- Continue converting getsockopt callbacks in a number of protocols
to iov_iter
Ethernet:
- Merge initial CXL support for AMD/Solarflare NICs (shared branch
with the CXL tree)
- New drivers:
- ADIN1140 10BASE-T1S MACPHY
- Initial skeleton of Intel iXD and ZTE Dinghai drivers
- High-speed NICs:
- AMD/Pensando:
- support firmware flashing
- Cisco (enic):
- SR-IOV V2 admin channel and MBOX protocol
- Huawei (hns3):
- support for ethtool pfc_prevention_tout
- nVidia/Mellanox:
- support sharing bandwidth control across interfaces
of the same device
- Marvell (octeontx2-pf):
- link RQ page pools to netdev for Netlink stats
- Google vNIC:
- XDP metadata support for DQ RDA
- Microsoft vNIC:
- support forcing full-page RX buffers
- Other NICs:
- Synopsys IP:
- eic7700: support for eth1
- Microchip (lan743x):
- support for RMII interface
- Wangxun:
- support for ethtool -G and -C for VFs
- add Tx timeout and PCIe error handling
- Intel (igb/igc):
- RSS key get/set support
- support for forcing link speed without auto-negotiation
- Switches:
- NXP (dpaa2):
- support bonding/LAG offload
- Mediatek:
- mt7530: EN7528 support
- initial support for MT7628
- Micrel (ksz8/9):
- refactoring work to move towards library model
- PTP support for KSZ8463
- nVidia/Mellanox:
- support rtnl-lock-less ethtool callbacks
- Realtek:
- rtl8366rb: use generic RTL83xx code
- support SGMII and HSGMII for RTL8367S
- PHYs:
- Airoha:
- EcoNet EN7528 PHY support
- DAPU Telecom
- DAPU Telecom DAP8211R(I) Gigabit PHY support
- Realtek:
- support RTL8261C_CG
- support RTL8261D
Wireless:
- nl80211: per-link statistics support for multi-link operation
- mac80211: AQL/airtime-fairness support for multicast
- Merge Peripheral Authentication Service (PAS) / TEE support for
ath12k (shared branch with the firmware/qcom tree)
- New drivers:
- mm81x for Morse Micro Long-Range S1G devices
- nxpwifi for NXP devices (mostly forked off from mwifiex)
- Driver changes:
- Broadcom (brcmfmac):
- DPP support, some Cypress part update
- MediaTek (mt76):
- mt7928 support
- mt7925 NAN support
- mt7996 AP powersave improvements
- Qualcomm (ath12k):
- much kernel infrastructure integration work
- AHB platform MultiPD support
- Realtek (rt89):
- LED support
- RTL8922DE support
- dual-BT coex for RTL8922D
- Intel:
- new FW version support
Bluetooth:
- HCI: add support for Shorter Connection Interval (SCI) feature
- af_bluetooth: add minimal context analysis annotations
- Driver changes:
- Intel:
- add Bluetooth SAR revision 2 support
- add vendor_reset PCI sysfs for PLDR
- Mediatek:
- add USB IDs for MT7902 and MT7922 devices
- Realtek:
- add USB IDs for 8761CU and 8852BE devices
- NXP:
- add M.2 Bluetooth device support using pwrseq
Misc:
- DPLL support for manual/numerical oscillator control (NCO)
(implement in zl3073x)
- MCTP support for MCTP over USB v1.1 (DMTF DSP0283)
- Power-over-Ethernet: support Realtek PSE controllers
- Remove the IBM EHEA driver
- Remove tulip/xircom_cb driver"
* tag 'net-next-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1433 commits)
net/mlx5e: do not HW-GRO coalesce small frames
net: openvswitch: fix nf_connlabels leak in ovs_ct_init
net: add missing ref_tracker_dir_exit() to alloc_netdev_mqs()
net: openvswitch: fix flow mask use-after-free on flow deletion
sctp: stop processing a packet once its association is deleted
dpll: zl3073x: add PTP clock support
dpll: zl3073x: add channel ToD, phase step and TIE operations
dpll: zl3073x: scale poll interval proportionally to timeout
ptp: vmclock: prevent read-only mappings from becoming writable
ipv4: reject undersized MTUs in ip_do_fragment()
bonding: initialize err for empty target lists
net: dsa: initial support for MT7628 embedded switch
net: dsa: initial MT7628 tagging driver
net: phy: mediatek: add phy driver for MT7628 built-in Fast Ethernet PHYs
dt-bindings: net: dsa: add MT7628 ESW
net: pse-pd: realtek-pse-mcu: add UART transport
net: pse-pd: realtek-pse-mcu: add I2C transport
net: pse-pd: add Realtek PSE MCU core
dt-bindings: net: pse-pd: add bindings for Realtek PSE MCU
vsock: use sock_error() to consume sk_err after a failed connect
...
|
|
Pull devicetree updates from Rob Herring:
- Add a DT maintainer profile document
- Various dt-check-style improvements
- Add a devres managed reserved memory region init function
- Print node name on any skipped reserved memory regions
- Correctly handle optional argument in
of_parse_phandle_with_args_map()
- Convert ti,keystone-reset, ti,da850-vpif, TI L4 interconnect, TI
SmartReflex, microchip,pic32mzda-dmt, microchip,pic32mzda-wdt, TI
DA8XX MSTPRI bus, and Xen VM bindings to DT schema format
- Add bindings for StarFive JHB100 plic, Allwinner A733 NMI controller,
MediaTek MT8173 GPU, QCom Shikra, Eliza, and Maili cpu-bwmon, and
QCom Shikra SCM firmware
- A couple of syntax fixes found using PoC Rust implementation of
dtschema tools
- Clean-ups for typos, brackets, incorrect "::" usages, and
white-space style
* tag 'devicetree-for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (40 commits)
dt-bindings: interconnect: qcom-bwmon: Add Maili cpu-bwmon compatible
dtc: dt-check-style: Simplify setting depth of DtsLine
dtc: dt-check-style: Add missing /dts-v1/ to few test cases
dt-bindings: power: reset: ti,keystone-reset: Convert to DT schema
media: dt-bindings: ti,da850-vpif: Convert to dt-schema
dt-bindings: devfreq: samsung,exynos-ppmu: Use standard regex syntax
dt-bindings: interrupt-controller: mediatek,mt6577-sysirq: Drop invalid JSON pointer
dt-bindings: arm: omap: Convert L4 interconnect to DT schema
dt-bindings: power: Convert TI SmartReflex to DT schema
of: reserved_mem: Introduce devres-managed initialization function
dt-bindings: interrupt-controller: Add StarFive JHB100 plic
dt-bindings: irq: sun7i-nmi: Document the Allwinner A733 NMI controller
dt-bindings: Correct white-space style
dt-bindings: fix typos and brackets
docs: dt: submitting-patches: Mention expectation about dt-check-style
docs: dt: maintainer: Add Devicetree and OF maintainer profile document
docs: dt: writing-schema: Extend expectations about example part of binding
dt-bindings: gpu: powervr-rogue: Add MediaTek MT8173 GPU
of: base: Handle optional argument in of_parse_phandle_with_args_map()
dt-bindings: update Sudeep Holla's email address
...
|
|
Marc Kleine-Budde says:
====================
pull-request: can-next 2026-08-18
The first patch is by Sean Nyekjaer, targets the tcan4x5x driver and
puts the device into sleep mode before removing the driver.
Pavel Pisa's patch fixes the colors in the documentation of the TX
buffer FSM of CTU CAN FD driver.
2 patches by Cunhao Lu add support for the rockchip 3588 SoC to the
rockchip CAN-FD driver.
Kuniyuki Iwashima contributes per-netns device unregistration for the
vxcan driver.
Eduard Bostina converts the TI HECC DT bindings doc to DT schema.
Harini T contributes 2 patches to the xilinx_can driver to document
phys and update maintainer.
A patch by bui duc phuc converts the m_can driver to use
of_property_present() for wakeup-source.
Fanbo He's patch fixes a typo in the gs_usb driver.
The last patch is by Markus Schneider-Pargmann and removed not needed
driver_data from the m_can PCI driver.
* tag 'linux-can-next-for-7.3-20260818' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: m_can: pci: Remove driver_data
drivers: gs_usb: gs_usb_probe(): fix typo in error message
can: m_can: Use of_property_present() for wakeup-source
dt-bindings: can: xilinx_can: Document phys property
dt-bindings: net: can: Convert TI HECC to DT schema
MAINTAINERS: Replace maintainer for Xilinx CAN driver
can: vxcan: support per-netns device unregistration.
docs: ctucanfd: fix swapped colors in legend for TX buffer FSM of CTU CAN FD
can: rockchip: add RK3588 CAN support
dt-bindings: can: rockchip: add rk3588 CAN-FD compatible
can: tcan4x5x: put tcan into sleep when removing driver
====================
Link: https://patch.msgid.link/20260817233420.2068204-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add device tree bindings for the MediaTek MT7628 embedded Ethernet
Switch.
The Switch provides 5 external user ports and 1 internal CPU port, with
integrated 10/100 PHYs and fixed port to PHY mapping.
The CPU port is internally connected and uses port index 6.
Signed-off-by: Joris Vaisvila <joey@tinyisr.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260813190241.789323-2-joey@tinyisr.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a binding for the microcontroller (MCU) that fronts the PSE silicon
on a range of managed Realtek-based switches. The host talks only to the
MCU, over I2C/SMBus or UART, using a fixed message-based protocol; the
PSE chips behind it never appear on the bus.
The device is the MCU together with its Realtek firmware: the firmware
and its host protocol are what the binding describes, not the
general-purpose microcontroller they run on. The PSE silicon behind the
MCU (Realtek or Broadcom) is reported by the MCU and detected at runtime,
so it is not described here - hence the 'realtek' vendor prefix.
Two protocol generations exist, both Realtek's, selected by the
compatible: gen1 on older boards (fronting Broadcom PSE silicon) and gen2,
the altered protocol used with Realtek's own PSE silicon. On an I2C
attachment the framing the MCU firmware expects is part of the compatible
as well - '-smbus' or raw '-i2c'; a UART attachment carries no framing
suffix, as the transport is given by the parent serial node.
Each board additionally carries a device-specific compatible that falls
back to one of the protocol compatibles above. Drivers bind on the
protocol compatible; the device-specific string identifies the board and
reserves a place for a future per-board quirk without having to retrofit
device trees already in the field.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260813222036.873930-2-jelonek.jonas@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Matthew Gerlach is no longer at Altera, so remove his entry as a
maintainer for the SoCFPGA DWMAC ethernet glue layer and the GMII/SGMII
dt-bindings files.
Maxime Chevallier has volunteered to maintain the dt-bindings YAML files
as well.
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Acked-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260813005536.2068392-1-dinguyen@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The Xilinx CAN and CANFD controllers can be connected to an external
CAN transceiver on the board. That connection is described with the
standard "phys" property on the controller node, pointing to a CAN
transceiver PHY node which models the transceiver and its control
lines (for example the standby/enable signals).
Describe the optional "phys" property (a single transceiver PHY) so
the on-board CAN transceiver can be described in the device tree.
Signed-off-by: Harini T <harini.t@amd.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260717021415.2234865-3-harini.t@amd.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Replace Appana Durga Kedareswara rao with Harini T as the maintainer
of the Xilinx CAN driver. Kedar is no longer maintaining it.
Signed-off-by: Harini T <harini.t@amd.com>
Acked-by: Appana Durga Kedareswara rao <appana.durga.kedareswara.rao@amd.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260717021415.2234865-2-harini.t@amd.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Convert the Texas Instruments High End CAN Controller (HECC) bindings
to DT schema.
Signed-off-by: Eduard Bostina <egbostina@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260719140127.3558941-1-egbostina@gmail.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
RK3588 integrates a Rockchip CAN-FD controller variant that is not
fully compatible with RK3568v2. The RX FIFO count register field is
encoded in bits 7:5 on RK3588, while RK3568v2 uses bits 6:4.
Add a dedicated rockchip,rk3588-canfd compatible to describe this
variant. Do not use rockchip,rk3568v2-canfd as a fallback, because that
would describe a register layout that does not match the hardware.
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Cunhao Lu <1579567540@qq.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/tencent_AE1A1199FC8C9ADC680C6458134A46B40309@qq.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Add device tree binding documentation for the DAPU Telecom DAP8211R(I)
Gigabit Ethernet PHY.
The PHY supports TX and RX clock delays in 150 ps steps from 0 to 2250 ps,
with a default of 1950 ps if not specified.
Signed-off-by: Artem Shimko <a.shimko.dev@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260805085540.452260-3-a.shimko.dev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Correct a few white-space issues, like double space after '=' or before
bracket '{' characters, which will be flagged by dt-check-style. No
functional changes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Jeff Johnson <jjohnson@kernel.org> # qcom,ath10k.yaml
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Uwe Kleine-König <ukleinek@kernel.org> # for Documentation/devicetree/bindings/pwm
Acked-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://patch.msgid.link/20260801195613.235430-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Correct a few white-space issues, like double space after '=' or before
bracket '{' characters, which will be flagged by dt-check-style. No
functional changes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260801195505.235099-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Remove needless ' ID)'
Signed-off-by: Manuel Ebner <manuelebnerli@mailbox.org>
Link: https://patch.msgid.link/20260722093259.3109588-2-manuelebnerli@mailbox.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The EcoNet EN7528 MIPS SoC integrates an MT7530 Gigabit switch,
memory-mapped in the SoC register space like the built-in switches of
the MediaTek MT7988 and Airoha EN7581/AN7583 SoCs. Its four user ports
are connected to integrated Gigabit PHYs and its CPU port is connected
internally to the SoC Ethernet MAC.
Those three switches are MT7531-based, whereas the EN7528 has a genuine
MT7530 switch core (its chip revision register reads 0x7530). The two
generations differ in their register programming - for example the CPU
port is selected through the MT7530-style MFC register rather than the
MT7531 CFC register - so the EN7528 is not compatible with the existing
switch compatibles and cannot fall back to one of them.
Add the econet,en7528-switch compatible, with the same constraints as
the other built-in switches.
Signed-off-by: Ahmed Naseef <naseefkm@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/2133035bb22eacc8a0e21f86c0c800a45023ee01.1783770059.git.naseefkm@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert the Microchip LAN78xx family (LAN7800, LAN7801, LAN7850) binding
documentation from plain text to DT schema.
Restoring a mistakenly deleted email in MAINTAINERS file and fixing
microchip,lan7800.yaml.
Signed-off-by: Mikhail Lukianchikov <avermoal@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260712113821.12543-1-avermoal@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ADIN1140 is a single port 10BASE-T1S Ethernet controller that
includes both the MAC and a PHY in the same package.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Ciprian Regus <ciprian.regus@analog.com>
Link: https://patch.msgid.link/20260708-adin1140-driver-v5-1-4aca7b51a58b@analog.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The EIC7700 SoC integrates two GMAC instances. The eth1 MAC exhibits
different RX clock sampling characteristics due to silicon-inherent
timing behavior.
The eth1 MAC has a fixed, non-configurable RX clock-to-data skew at the
MAC input in the order of 4-5 ns. This cannot be compensated solely by
the standard MAC internal delay configuration and PHY delay, and RX clock
inversion is required at 1000Mbps for correct sampling.
The eth1 TX path also includes a fixed silicon-inherent delay of
approximately 2 ns. This delay is always present and cannot be disabled.
It is therefore part of the effective transmit timing observed on the
wire.
For the eth1 variant, the valid tx-internal-delay-ps values include
this fixed delay component. Consequently, the effective range becomes
2000-4540 ps (approximately 2000 ps fixed delay plus 0-2540 ps
programmable delay).
Introduce a dedicated compatible string
"eswin,eic7700-qos-eth-clk-inversion" to represent the eth1 variant,
allowing the driver to apply RX clock inversion only when required by
hardware variant selection.
This keeps SoC-level differentiation without exposing silicon-fixed skew
as configurable device tree parameters.
To reflect this, model the TX internal delay as a base 0-4540 ps range,
and constrain valid values per compatible using conditional schema rules.
Update the binding schema as follows:
- Define tx-internal-delay-ps as a base range: 0-4540 ps
- Add compatible-specific constraints using if/then rules:
* eswin,eic7700-qos-eth:
max 2540 ps
* eswin,eic7700-qos-eth-clk-inversion:
minimum 2000 ps (effective range 2000-4540 ps)
No functional change for existing "eswin,eic7700-qos-eth" users.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Zhi Li <lizhi2@eswincomputing.com>
Link: https://patch.msgid.link/20260707064159.1299-1-lizhi2@eswincomputing.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Relax internal delay constraints for EIC7700 Ethernet binding.
Replace fixed enumeration of rx-internal-delay-ps and tx-internal-delay-ps
with a range-based definition (0-2540 ps, 20 ps steps) to reflect actual
hardware capability.
Mark rx/tx internal delay properties as optional, as they are board-
specific tuning parameters rather than mandatory configuration.
Update the device tree example to align with the relaxed constraint model
and remove delay properties from the example to avoid implying they are
required.
No functional change to existing DT users.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Zhi Li <lizhi2@eswincomputing.com>
Link: https://patch.msgid.link/20260707064131.1282-1-lizhi2@eswincomputing.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The stmmac hardware on Agilex5 supports 8 TX/RX queue pairs and is
dma-coherent. Update the schema to handle the hardware differences
between SoC variants.
Also make 'interrupts' and 'interrupt-names' as required properties.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
---
v2: Set the top level interrupts to include the widest contraints(1-17)
Just have 1 list of all interrupt-names
Update commit message to include 'interrupts' and 'interrupt-names'
as required properties
Change minItems 1 to maxItems 1 for non agilex5 variants
Add same constraint for interrupt-names
|
|
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter and IPsec.
Current release - regressions:
- do not acquire dev->tx_global_lock in netdev_watchdog_up()
- ethtool: keep rtnl_lock for ops using ethtool_op_get_link()
- fix deadlock in nested UP notifier events
Current release - new code bugs:
- eth:
- cn20k: fix subbank free list indexing for search order
- airoha: fix BQL underflow in shared QDMA TX ring
Previous releases - regressions:
- netfilter:
- flowtable: fix offloaded ct timeout never being extended
- nf_conncount: prevent connlimit drops for early confirmed ct
Previous releases - always broken:
- require CAP_NET_ADMIN in the originating netns when modifying
cross-netns devices
- report NAPI thread PID in the caller's pid namespace
- mac802154: fix dirty frag in in-place crypto for IOT radios
- sctp: hold socket lock when dumping endpoints in sctp_diag, avoid
an overflow
- eth: gve: fix header buffer corruption with header-split and HW-GRO
- af_key: initialize alg_key_len for IPComp states, prevent OOB read"
* tag 'net-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (213 commits)
selftests: bonding: add a test for VLAN propagation over a bonded real device
vlan: defer real device state propagation to netdev_work
net: add the driver-facing netdev_work scheduling API
net: turn the rx_mode work into a generic netdev_work facility
net: ethtool: keep rtnl_lock for ops using ethtool_op_get_link()
rxrpc: Fix rxrpc_rotate_tx_rotate() to check there's something to rotate
rxrpc: Fix leak of released call in recvmsg(MSG_PEEK)
rxrpc: Fix socket notification race
rxrpc: Fix potential infinite loop in rxrpc_recvmsg()
rxrpc: Fix oob challenge leak in cleanup after notification failure
rxrpc: Fix the reception of a reply packet before data transmission
afs: Fix uncancelled rxrpc OOB message handler
afs: Fix further netns teardown to cancel the preallocation charger
rxrpc: Fix double unlock in rxrpc_recvmsg()
rxrpc: Fix leak of connection from OOB challenge
rxrpc: Fix ACKALL packet handling
net: hns3: differentiate autoneg default values between copper and fiber
net: hns3: fix permanent link down deadlock after reset
net: hns3: refactor MAC autoneg and speed configuration
net: hns3: unify copper port ksettings configuration path
...
|
|
Emails to the maintainer of Qualcomm PPE Ethernet driver (Luo Jie
<quic_luoj@quicinc.com>) bounce permanently (full mailbox), because the
"quicinc.com" addresses were deprecated for public work. All Qualcomm
contributors are aware of that and were asked to fix their addresses.
Driver is not supported - in terms of how netdev understands supported
commitment - if maintainer does not care to receive the patches for its
code, so demote it to "maintained" to reflect true status.
Fix all occurences of Luo Jie email address to preferred and working
domain.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Luo Jie <jie.luo@oss.qualcomm.com>
Link: https://patch.msgid.link/20260623073307.36483-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix the Micrel PHY in the example which shouldn't have the
fallback "ethernet-phy-ieee802.3-c22" compatible:
Documentation/devicetree/bindings/net/renesas,ether.example.dtb: ethernet-phy@1 \
(ethernet-phy-id0022.1537): compatible: ['ethernet-phy-id0022.1537', 'ethernet-phy-ieee802.3-c22'] is too long
from schema $id: http://devicetree.org/schemas/net/micrel.yaml
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Fixes: 37a2fce09001 ("dt-bindings: sh_eth convert bindings to json-schema")
Link: https://patch.msgid.link/20260624150250.131966-2-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull devicetree updates from Rob Herring:
"DT core:
- Add support for handling multiple cells in "iommu-map" entries
- Support only 1 entry in /reserved-memory "reg" entries. Support for
more than 1 entry has been broken
- Fix a UAF on alloc_reserved_mem_array() failure
- Make "ibm,phandle" handling logic specific to PPC
- Use memcpy() instead of strcpy() for known length strings
- Ensure __of_find_n_match_cpu_property() handles malformed "reg"
entries
- Add various checks that expected strings are strings before
accessing them
- Drop redundant memset() when unflattening DT
DT bindings:
- Add a DTS style checker. Currently hooked up to dt_binding_check to
check examples
- Convert st,nomadik platform, ti,omap-dmm, and ti,irq-crossbar
bindings to DT schema
- Add Apple System Management Controller hwmon, Qualcomm Hamoa
Embedded Controller, Qualcomm IPQ6018 PWM controller, fsl,mc1323,
Samsung SOFEF01-M DDIC panel, Freescale i.MX53 Television Encoder,
Samsung S2M series PMIC extcon, and MT6365 PMIC AuxADC schemas
- Extend bindings for QCom Maili and Nord PDC, QCom Hali fastrpc,
qcom,eliza-imem, qcom,oryon-1-5 CPU, and MT6365 Keys
- Consolidate "sram" property definitions
- Fix constraints on "nvmem" properties which only contain phandles
and no arg cells
- Another pass of fixing "phandle-array" constraints
- Add Gira vendor prefix"
* tag 'devicetree-for-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (50 commits)
dt-bindings: interrupt-controller: qcom,pdc: Add Maili compatible string
dt-bindings: interrupt-controller: ti,irq-crossbar: Convert to DT schema
dt-bindings: vendor-prefixes: add Gira
dt-bindings: embedded-controller: Add Qualcomm reference device EC description
dt-bindings: pwm: add IPQ6018 binding
dt-bindings: hwmon: Add Apple System Management Controller hwmon schema
docs: dt: writing-schema: Clarify what is required in a schema
of: Respect #{iommu,msi}-cells in maps
of: Factor arguments passed to of_map_id() into a struct
of: Add convenience wrappers for of_map_id()
of: reserved_mem: zero total_reserved_mem_cnt if no valid /reserved-memory entry
of: reserved_mem: handle NULL name in of_reserved_mem_lookup()
dt-bindings: cache: l2c2x0: Add missing power-domains
dt-bindings: interrupt-controller: renesas,r9a09g077-icu: Fix reg size in example
dt-bindings: nvmem: consumer: Make 'nvmem' an array of one-item entries
drivers/of/overlay: Use memcpy() to copy known length strings
dt-bindings: add self-test fixtures for style checker
dt-bindings: wire style checker into dt_binding_check
scripts/jobserver-exec: propagate child exit status
dt-bindings: add DTS style checker
...
|
|
Pull SoC devicetree updates from Arnd Bergmann:
"There are fewer devicetree updates this time that the last few ones,
with five SoC types getting added:
- Qualcomm Dragonwing IPQ9650 is a new wireless networking SoC using
four Cortex-A55 and one Cortex-A78 core, which is a significant
upgrade from older generations
- ZTE zx297520v3 is an older low-end wireless SoC using a single
Cortex-A53 core, which so far can only run 32-bit kernels. This
brings back the ZX family of chips that was removed in 2021 after
support for the original zx296702 and zx296718 chips was never
completed.
- Renesas R-Car M3Le (R8A779MD) is a variant of the R-Car M3-N
(R8A77965) automotive SoC.
- Apple t8122 (M3) is the 2023 generation of their laptop SoCs, which
has now been reverse-engineered to the point of having initial
kernel support for five laptop models.
- ASPEED AST27xx is their first baseboard managment controller using
a 64-bit core, the Cortex-A35, following earlier generations using
ARMv5/v6/v7 CPUs.
These all come with one or more initial boards, and in total there are
39 new boards getting added across SoC families, including:
- Two NAS boxes using the old Cortina Systems Gemini SoC based on an
ARMv4 FA526 CPU core
- 18 industrial embedded boards using NXP i.MX6/8/9 and LX2160A SoCs
from Variscite, Toradex and SolidRun, plus a number of overlays for
combinations with additional boards
- One new carrier board and SoM using TI K3 AM62x, in addition to new
overlays for older SoMs
- Two new boards using Spacemit K3 (no relation with TI) RISC-V SoCs.
- Three phones from Google, Nothing and Motorola, all using Qualcomm
Snapdragon SoCs
- AST26xx BMC support for two server boards
While there is still a significant number of patches improving
hardware support for the existing boards across vendors (NXP,
Qualcomm, Renesas, Rockchips, Mediatek, ...), a much smaller number
of cleanups and warning fixes have made it in this time"
* tag 'soc-dt-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (665 commits)
arm64: dts: aspeed: Fix duplicate pinctrl labels and address scheme
arm64: dts: bst: enable eMMC controller in C1200
dt-bindings: display/lvds-codec: add ti,sn65lvds93
arm64: dts: allwinner: a523: Add missing GPIO interrupt
arm64: dts: lx2160a-rev2: avoid 32-bit pcie window system ram overlap
arm64: dts: aspeed: Add initial AST27xx SoC device tree
arm64: Kconfig: Add ASPEED SoC family Kconfig support
dt-bindings: arm: aspeed: Add AST2700 board compatible
arm64: dts: allwinner: a523: add gpadc node
arm64: dts: allwinner: Add EL2 virtual timer interrupt
ARM: dts: sun8i: a83t: Add MIPI CSI-2 controller node
dt-bindings: media: sun6i-a31-isp: Add optional interconnect properties
dt-bindings: media: sun6i-a31-csi: Add optional interconnect properties
arm64: dts: imx{91,93}-phyboard-segin: Add peb-av-18 overlays
arm64: dts: imx93-var-som-symphony: enable ADC
arm64: dts: imx93-var-som-symphony: enable TPM3 PWM
arm64: dts: imx93-var-som-symphony: keep RGB_SEL low
arm64: dts: imx93-var-som-symphony: enable UART7
arm64: dts: imx93-var-som-symphony: add TPM support
arm64: dts: imx91-var-som-symphony: fix RGB_SEL handling
...
|
|
Merge in late fixes in preparation for the net-next PR.
Conflicts:
net/tls/tls_sw.c
406e8a651a7b ("net: skmsg: preserve sg.copy across SG transforms")
79511603a65b ("tls: remove dead sockmap (psock) handling from the SW path")
drivers/net/ethernet/microsoft/mana/mana_en.c
f8fd56977eeea ("net: mana: guard TX wq object destroy with INVALID_MANA_HANDLE check")
d07efe5a6e641 ("net: mana: Use per-queue allocation for tx_qp to reduce allocation size")
https://lore.kernel.org/ajAPXu-C_PuTgV-a@sirena.org.uk
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
According to OPEN Alliance 10BASE-T1x MACPHY Serial Interface (TC6)
specification, interrupt type is active low, level triggered interrupt.
Specification calls for when interrupt level will be asserted and what
condition it is de-asserted. By using edge triggered interrupt, there is a
potential chance to miss it, particularly if it is asserted when interrupt
is disabled.
Level triggered interrupt can't be missed as it gets de-asserted only on
interrupt handler taking actions on interrupting conditions.
Fixes: ac49b950bea9 ("dt-bindings: net: add Microchip's LAN865X 10BASE-T1S MACPHY")
Signed-off-by: Selvamani Rajagopal <Selvamani.Rajagopal@onsemi.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260611-level-trigger-v5-4-4533a9e85ce2@onsemi.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert lan9303.txt to yaml format to fix below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx53-kp-hsc.dtb: /soc/bus@50000000/i2c@53fec000/switch@a: failed to match any schema with compatible: ['smsc,lan9303-i2c']
Additional changes:
- rename switch-phy to switch in example.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260610150533.515914-1-Frank.Li@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The 10G Realtek Otto switches are divided into two series
- Longan: RTL930x up to 28 ports
- Mango : RTL931x up to 56 ports
The Mango based devices have 3 different SoCs RTL9311, RTL9312 and RTL9313.
The MDIO controller of these switches works like the existing RTL930x
logic but has different characteristics and different registers. Add new
compatibles in the device tree.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://patch.msgid.link/20260610194145.4153668-2-markus.stockhausen@gmx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Further testing revealed that the RX and TX clocks of the IPQ5018 PHY
need to be explicitly enabled. As such, add the required clocks to the
schema.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://patch.msgid.link/20260608-ipq5018-gephy-clocks-v4-2-fb2ccd56894b@outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The clocks property has a restriction to maximum one.
Yet, some PHYs may require more than 1 clock such as the IPQ5018 PHY
which requires two clocks for RX and TX. As such, increase maxItems to
two.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://patch.msgid.link/20260608-ipq5018-gephy-clocks-v4-1-fb2ccd56894b@outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Microchip PSE controllers have a dedicated port disable input that like it
name suggest, will disable PoE on all ports.
So, lets document that GPIO.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260607165600.1260210-1-robert.marko@sartura.hr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
EN7581 and AN7583 SoCs support connecting multiple external SerDes to GDM3
or GDM4 ports via a hw arbiter that manages the traffic in a TDM manner.
As a result multiple net_devices can connect to the same GDM{3,4} port
and there is a theoretical "1:n" relation between GDM ports and
net_devices.
Introduce the ethernet node child of a specific GDM port in order to model
a given net_device that is connected via the external arbiter to the
GDM{3,4} port. This new ethernet node is defined by the "airoha,eth-port"
compatible string. Please note GDM1 and GDM2 does not support the
connection with the external arbiter and they are represented by an
ethernet node defined by the "airoha,eth-mac" compatible string.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260603-airoha-eth-multi-serdes-v9-1-5d476bc2f426@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
dsa.txt has been a redirect to dsa.yaml since commit bce58590d1bd
("dt-bindings: net: dsa: Add DSA yaml binding") introduced the .yaml
schema. The .yaml has the same filename in the same directory, making
this redirect unnecessary for discoverability.
Two files still reference dsa.txt, forcing readers through an extra
hop to reach the .yaml. The stub has not been touched since August
2020. Update references in lan9303.txt and
Documentation/networking/dsa/dsa.rst to point directly to dsa.yaml
and remove the stub.
Signed-off-by: Akash Sukhavasi <akash.sukhavasi@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260603-b4-remove-redirect-stubs-v2-3-c8c19876ab64@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mdio.txt has been a single-line redirect to mdio.yaml since
commit 62d77ff7ecbf ("dt-bindings: net: Add a YAML schemas for the
generic MDIO options"), which introduced the .yaml schema and reduced
the .txt to a stub in the same change. The .yaml has the same filename
in the same directory, making this redirect unnecessary for
discoverability.
No files in the tree reference mdio.txt and it has not been touched
since June 2019. Remove the obsolete stub.
Signed-off-by: Akash Sukhavasi <akash.sukhavasi@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260603-b4-remove-redirect-stubs-v2-1-c8c19876ab64@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-7.1-rc7).
Silent conflicts:
net/wireless/nl80211.c
cb9959ab5f99 ("wifi: cfg80211: enforce HE/EHT cap/oper consistency")
a384ae969902 ("wifi: cfg80211: move AP HT/VHT/... operation to beacon info")
https://lore.kernel.org/aiGJDaHV4UlCexIQ@sirena.org.uk
Conflicts:
drivers/net/wireless/intel/iwlwifi/mld/ap.c
a342c99cb70d ("wifi: iwlwifi: mld: honor BSS_CHANGED_BEACON_ENABLED")
9bf1b409afc7 ("wifi: iwlwifi: mld: send tx power constraints before link activation")
https://lore.kernel.org/ah2bfedhV45ZxMO8@sirena.org.uk
drivers/net/wireless/intel/iwlwifi/pcie/drv.c
093305d801fa ("wifi: iwlwifi: pcie: simplify the resume flow if fast resume is not used")
e2323929a68a ("wifi: iwlwifi: pcie: add debug print for resume flow if powered off")
https://lore.kernel.org/ah2bfedhV45ZxMO8@sirena.org.uk
Adjacent changes:
drivers/net/ethernet/airoha/airoha_eth.c
b38cae85d1c4 ("net: airoha: Fix use-after-free in metadata dst teardown")
ec6c391bcca7 ("net: airoha: Introduce airoha_gdm_dev struct")
drivers/net/ethernet/microchip/lan743x_main.c
8173d22b211f ("net: lan743x: permit VLAN-tagged packets up to configured MTU")
e3c6508a46f5 ("net: lan743x: avoid netdev-based logging before netdev registration")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit c36069c6f46c ("dt-bindings: ethernet: eswin: add optional TXD and
RXD delay register offsets") added two optional cells to eswin,hsp-sp-csr
but omitted minItems: 4.
As a result, dt-schema implicitly required all 6 cells, which broke
backward compatibility with existing 4-cell device trees.
Add minItems: 4 to preserve backward compatibility.
Fixes: c36069c6f46c ("dt-bindings: ethernet: eswin: add optional TXD and RXD delay register offsets")
Reported-by: Sashiko AI <sashiko-bot@kernel.org>
Closes: https://lore.kernel.org/all/20260519022334.35742C2BCB7@smtp.kernel.org/
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Zhi Li <lizhi2@eswincomputing.com>
Link: https://patch.msgid.link/20260602014528.2076-1-lizhi2@eswincomputing.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The jhb100 GMAC still using Synopsys designware GMAC core.
hardware features are similar with jh7100.
Add jhb100 GMAC compatible and reset, interrupts features.
jhb100 dwmac has only one reset signal and one interrupt
line.
jhb100 SGMII interface tx/rx mac clock is split and require to
set clock rate in 10M/100M/1000M speed. So dts need to add a
new rx clock in code, dts and dt binding doc.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260527084108.121416-3-minda.chen@starfivetech.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove jh8100 dt-bindings because do not support it now.
StarFive have stopped jh8100 developing and will not release
it outside.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260527084108.121416-2-minda.chen@starfivetech.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a new binding to support the Airoha AN8801R Series Gigabit
Ethernet PHY.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Link: https://patch.msgid.link/20260526-add-airoha-an8801-support-v5-1-01aea8dee69b@collabora.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Johannes Berg says:
====================
Not much going on here right now:
- mac80211/hwsim:
- some NAN related things
- MCS/NSS rate issues with S1G
- p54: port SPI version to device-tree
- (a few other random things)
* tag 'wireless-next-2026-05-21' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next:
ARM: dts: omap2: add stlc4560 spi-wireless node
p54spi: convert to devicetree
dt-bindings: net: add st,stlc4560/p54spi binding
wifi: mac80211: allow cipher change on NAN_DATA interfaces
wifi: mac80211_hwsim: Do not declare NAN support for Extended Key ID
wifi: cfg80211: add a function to parse UHR DBE
wifi: mac80211: don't call ieee80211_handle_reconfig_failure when not needed
wifi: mac80211: Allow per station GTK for NAN Data interfaces
wifi: mac80211_hwsim: advertise NPCA capability
wifi: mac80211_hwsim: reject NAN on multi-radio wiphys
wifi: plfxlc: use module_usb_driver() macro
wifi: mac80211: don't recalc min def for S1G chan ctx
wifi: mac80211: skip NSS and BW init for S1G sta
wifi: mac80211: check stations are removed before MLD change
wifi: rt2x00: allocate anchor with rt2x00dev
====================
Link: https://patch.msgid.link/20260521153519.380276-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-7.1-rc5).
No conflicts, adjacent changes:
drivers/net/ethernet/mellanox/mlx5/core/en_txrx.c
cc199cd1b912 ("net/mlx5e: Reduce branches in napi poll")
c326f9c68921 ("net/mlx5e: xsk: Fix unlocked writing to ICOSQ")
drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
c6df9a65cbb0 ("net/mlx5: Skip disabled vports when setting max TX speed")
1fba57c91416 ("net/mlx5: Add VHCA_ID page management mode support")
net/mac80211/mlme.c
a6e6ccd5bd07 ("wifi: mac80211: consume only present negotiated TTLM maps")
49e62ec6eb06 ("wifi: mac80211: move frame RX handling to type files")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add bindings for NETC switch. This switch is a PCIe function of NETC IP,
it supports advanced QoS with 8 traffic classes and 4 drop resilience
levels, and a full range of TSN standards capabilities. The switch CPU
port connects to an internal ENETC port, which is also a PCIe function
of NETC IP. So these two ports use a light-weight "pseudo MAC" instead
of a back-to-back MAC, because the "pseudo MAC" provides the delineation
between switch and ENETC, this translates to lower power (less logic and
memory) and lower delay (as there is no serialization delay across this
link).
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260518082506.1318236-3-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The current description indicates that the 'dsa,member' property cannot
be set for a switch that is not part of any cluster. Vladimir thinks
that this is a case where the actual technical limitation was poorly
transposed into words when this restriction was first documented, in
commit 8c5ad1d6179d ("net: dsa: Document new binding").
The true technical limitation is that many DSA tagging protocols are
topology-unaware, and always call dsa_conduit_find_user() with a
switch_id of 0. Specifying a custom "dsa,member" property with a
non-zero switch_id would break them.
Therefore, for topology-aware switches, it is fine to specify this
property for them, even if they are not part of any cluster. Our NETC
switch is a good example which is topology-aware, the switch_id is
carried in the switch tag, but the switch_id 0 is reserved for VEPA
switch and cannot be used, so we need to use this property to assign
a non-zero switch_id for it.
Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260518082506.1318236-2-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Document two optional cells in eswin,hsp-sp-csr for the TXD and RXD
delay control register offsets.
These registers are used by the driver to clear any residual delay
configuration left by the bootloader, ensuring that MAC-side RGMII delay
settings are applied solely according to the kernel configuration.
Add a reference to the EIC7700X SoC Technical Reference Manual for
background information about the HSP CSR block.
Fixes: 888bd0eca93c ("dt-bindings: ethernet: eswin: Document for EIC7700 SoC")
Signed-off-by: Zhi Li <lizhi2@eswincomputing.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260518022023.427-1-lizhi2@eswincomputing.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The SPI version of Prism54 was sold under a couple of different
names and supported by the Linux p54spi driver, but there was
never a DT binding for it.
Document the four known names of this device and the properties
that are sufficient for its use on the Nokia N8x0 tablet.
As I don't have this hardware or documentation for it, this is
purely based on existing usage in the driver.
Link: https://lore.kernel.org/all/e8dc9acb-6f85-e0a9-a145-d101ca6da201@gmail.com/
Acked-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260507212451.3333185-2-arnd@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The "sram" property has become a de facto standard property, so create a
common schema for it and drop all the duplicated definitions.
Reviewed-by: Linus Walleij <linusw@kernel.org>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Liu Ying <victor.liu@nxp.com> #fsl,imx8qxp-dc-command-sequencer.yaml
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> # display/msm
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Tanmay Shah <tanmay.shah@amd.com>
Link: https://patch.msgid.link/20260511165942.2774868-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
The unfortunately named 'phandle-array' property type is really a matrix
with phandle and fixed arg cells entries. A matrix property should have 2
levels of items constraints.
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20260507201749.2605365-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Add bindings for LAN7500 and LAN7505 USB Ethernet Devices which are similar
to LAN9500.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260506-b4-var-som-om44-lan7500-v2-1-b8af59ab877c@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The dsa.yaml and ethernet-switch.yaml bindings recommend
prefixing ethernet switches and ports with "ethernet-" so
make the LAN966x do the same.
Reported-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260507-lan966-binding-v1-1-e99293d2a4ec@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
Linus Torvalds
Jakub Kicinski
Joris Vaisvila
Jonas Jelonek
Dinh Nguyen
Harini T
Eduard Bostina
Cunhao Lu
Artem Shimko
Krzysztof Kozlowski
Manuel Ebner
Ahmed Naseef
Mikhail Lukianchikov
Ciprian Regus
Zhi Li
Rob Herring (Arm)
Selvamani Rajagopal
Frank Li
Markus Stockhausen
George Moussalem
Robert Marko
Lorenzo Bianconi
Akash Sukhavasi
Minda Chen
AngeloGioacchino Del Regno
Wei Fang
Arnd Bergmann
Thomas Richard
Linus Walleij