| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Semantically glink-edge and glink-rpm-edge are similar: Both describe
the communication channels to a remote processor. The RPM glink-edge is
a special case that needs slightly different properties but otherwise
it is used exactly the same.
To improve consistency use the same "glink-edge" node name also for
glink-rpm-edge. Drop the $nodename from qcom,glink-edge.yaml to avoid
matching the wrong schema. qcom,glink-edge.yaml is always referenced
explicitly from other schemas. This will already ensure that the nodes
are being checked, so it's not necessary to bind to all nodes named
"glink-edge".
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230531-rpm-rproc-v3-5-a07dcdefd918@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230327170114.4102315-1-robh@kernel.org
|
|
Pull remoteproc updates from Bjorn Andersson:
- Support for PRU clients to acquire a control reference to the PRU
instances is introduced, and the PRU now allows specifying
firmware-name in Devicetree. sysfs is requested to be read-only when
the remoteproc instance is consumed by another kernel driver
- Support for the C7xv DSP on AM62A SoC is introduced
- The Devicetree binding for the Qualcomm PAS devices are split up in
multiple files, to better account for the differences in resources
between them. A number of missing Devicetree bindings are added, and
the Qualcomm WCNSS binding is converted to YAML
- A few cleanups are introduced for the Mediatek SCP driver. And a
sanity check of the firmware image is introduced in the Mediatek
driver
- For Qualcomm SC7280 ADSP support is added, MSM8953 gains ADSP and
modem support, SM6115 and SM8550 gains ADSP, CDSP and modem support,
and support for pronto v3 support (used on e.g. MSM8953) is added
- The Qualcomm modem remoteproc driver is modified to use a no-map
reserved-memory region for it's authentication metadata, in order to
avoid fatal security violations caused by accesses from Linux during
the authentication process
- Support for separate loading of a Devicetree blob is added to the PAS
driver, and support for the PAS driver to carve out DSM memory for
the modem is added as well
- The Qualcomm ADSP remoteproc driver gains support for mapping memory
into specific range using the IOMMU. The sysmon driver is
transitioned to strlcpy()
* tag 'rproc-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (69 commits)
dt-bindings: mailbox: qcom,apcs-kpss-global: drop mbox-names from example
dt-bindings: remoteproc: qcom,glink-edge: correct label description
dt-bindings: remoteproc: qcom,glink-rpm-edge: convert to DT schema
dt-bindings: remoteproc: qcom,sm8550-pas: correct power domains
remoteproc: qcom_q6v5_pas: enable sm8550 adsp & cdsp autoboot
dt-bindings: remoteproc: qcom: Add sm6115 pas yaml file
remoteproc: qcom: pas: Add sm6115 remoteprocs
remoteproc: qcom: pas: Adjust the phys addr wrt the mem region
remoteproc: qcom: fix sparse warnings
remoteproc: qcom: replace kstrdup with kstrndup
remoteproc: mediatek: Check the SCP image format
remoteproc: qcom_q6v5_mss: Use a carveout to authenticate modem headers
Revert "remoteproc: qcom_q6v5_mss: map/unmap metadata region before/after use"
dt-bindings: remoteproc: qcom,sc7280-mss-pil: Update memory-region
dt-bindings: remoteproc: qcom,sc7180-mss-pil: Update memory-region
dt-bindings: remoteproc: qcom,msm8996-mss-pil: Update memory region
dt-bindings: remoteproc: qcom,q6v5: Move MSM8996 to schema
remoteproc: qcom_q6v5_pas: add sm8550 adsp, cdsp & mpss compatible & data
remoteproc: qcom_q6v5_pas: add support for assigning memory to firmware
remoteproc: qcom_q6v5_pas: add support for dtb co-firmware loading
...
|
|
Correct the description of 'label' property.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230208101545.45711-7-krzysztof.kozlowski@linaro.org
|
|
The existing SM8450 DTS (and newer platforms) come with a "gpr" child node,
not "apr":
sm8450-sony-xperia-nagara-pdx224.dtb: remoteproc@30000000: glink-edge: Unevaluated properties are not allowed ('gpr' was unexpected)
From schema: Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.yaml
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221223132213.81273-1-krzysztof.kozlowski@linaro.org
|
|
GLINK edge contains subnodes representing devices related to the remote
processor. Each of such device (e.g. APR or FastRPC) must have
a "qcom,glink-channels" property. However the APR or FastRPC device can
be also part of other communication - SMD - thus their schema does not
require "qcom,glink-channels".
To make the GLINK edge bindings strict, require "qcom,glink-channels"
for its children.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220909125403.803158-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Convert Qualcomm FastRPC bindings to yaml format, so that we could validate
dt-entries correctly and any future additions can go into yaml format.
Use compute-cb@ subnodes instead of just cb@. Add qcom,glink-channels and
qcom,smd-channels missing properties to make sure dtbs_check doesn't fail
right off the bat. Correct the name of the parent node in the example from
smd-edge to glink-edge.
Since now the qcom,fastrpc bindings document is yaml, update the
reference to it in qcom,glink-edge and also use $ref.
Also update the MAINTAINERS file to point to the yaml version.
Co-developed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Co-developed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220907074301.3996021-1-abel.vesa@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
'glink-edge' property appears in multiple bindings, so split it into one
place which can be re-used. This reduces code duplication and adds
strict schema matching for glink-edge nodes (instead of just
"type:object").
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220517070113.18023-8-krzysztof.kozlowski@linaro.org
|
Stephan Gerhold
Rob Herring
Linus Torvalds
Krzysztof Kozlowski
Abel Vesa