aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/arch (follow)
AgeCommit message (Collapse)AuthorFilesLines
2024-05-02Revert "sh: Handle calling csum_partial with misaligned data"Guenter Roeck1-49/+18
This reverts commit cadc4e1a2b4d20d0cc0e81f2c6ba0588775e54e5. Commit cadc4e1a2b4d ("sh: Handle calling csum_partial with misaligned data") causes bad checksum calculations on unaligned data. Reverting it fixes the problem. # Subtest: checksum # module: checksum_kunit 1..5 # test_csum_fixed_random_inputs: ASSERTION FAILED at lib/checksum_kunit.c:500 Expected ( u64)result == ( u64)expec, but ( u64)result == 53378 (0xd082) ( u64)expec == 33488 (0x82d0) # test_csum_fixed_random_inputs: pass:0 fail:1 skip:0 total:1 not ok 1 test_csum_fixed_random_inputs # test_csum_all_carry_inputs: ASSERTION FAILED at lib/checksum_kunit.c:525 Expected ( u64)result == ( u64)expec, but ( u64)result == 65281 (0xff01) ( u64)expec == 65280 (0xff00) # test_csum_all_carry_inputs: pass:0 fail:1 skip:0 total:1 not ok 2 test_csum_all_carry_inputs # test_csum_no_carry_inputs: ASSERTION FAILED at lib/checksum_kunit.c:573 Expected ( u64)result == ( u64)expec, but ( u64)result == 65535 (0xffff) ( u64)expec == 65534 (0xfffe) # test_csum_no_carry_inputs: pass:0 fail:1 skip:0 total:1 not ok 3 test_csum_no_carry_inputs # test_ip_fast_csum: pass:1 fail:0 skip:0 total:1 ok 4 test_ip_fast_csum # test_csum_ipv6_magic: pass:1 fail:0 skip:0 total:1 ok 5 test_csum_ipv6_magic # checksum: pass:2 fail:3 skip:0 total:5 # Totals: pass:2 fail:3 skip:0 total:5 not ok 22 checksum Fixes: cadc4e1a2b4d ("sh: Handle calling csum_partial with misaligned data") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Link: https://lore.kernel.org/r/20240324231804.841099-1-linux@roeck-us.net Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
2024-05-02sh: j2: Drop incorrect SPI controller spi-max-frequency propertyKrzysztof Kozlowski1-2/+0
The J2 SPI controller bindings never allowed spi-max-frequency property in the controller node. Neither old spi-bus.txt bindings, nor new DT schema allows it. Linux driver does not parse that property from controller node, thus drop it from DTS as incorrect hardware description. The SPI child device has already the same property with the same value, so functionality should not be affected. Cc: Kousik Sanagavarapu <five231003@gmail.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Tested-by: Rob Landley <rob@landley.net> Link: https://lore.kernel.org/r/20240322064221.25776-1-krzysztof.kozlowski@linaro.org Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
2024-05-02sh: push-switch: Convert to platform remove callback returning voidUwe Kleine-König1-4/+2
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Link: https://lore.kernel.org/r/20240306211947.97103-2-u.kleine-koenig@pengutronix.de Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
2024-05-02sh: sh7785lcr: Make init_sh7785lcr_IRQ() staticGeert Uytterhoeven1-1/+1
arch/sh/boards/board-sh7785lcr.c:298:13: warning: no previous prototype for ‘init_sh7785lcr_IRQ’ [-Wmissing-prototypes] There are no users outside this file, so make it static. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Link: https://lore.kernel.org/r/cbe9da98a1106cdab686766e2f23f768399dbdbf.1709579038.git.geert+renesas@glider.be Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
2024-05-02sh: sh7757: Add missing #include <asm/mmzone.h>Geert Uytterhoeven1-0/+3
arch/sh/kernel/cpu/sh4a/setup-sh7757.c:1240:13: warning: no previous prototype for ‘plat_mem_setup’ [-Wmissing-prototypes] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Link: https://lore.kernel.org/r/c9c26472151d16a2ca91f14bccd64af07a6abdd8.1709579038.git.geert+renesas@glider.be Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
2024-05-02sh: sh7757lcr: Make init_sh7757lcr_IRQ() staticGeert Uytterhoeven1-1/+1
arch/sh/boards/board-sh7757lcr.c:572:13: warning: no previous prototype for 'init_sh7757lcr_IRQ' [-Wmissing-prototypes] There are no users outside this file, so make it static. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Link: https://lore.kernel.org/r/fba00424b5b0bee0f9b9cbc63d649a86854d202f.1709579038.git.geert+renesas@glider.be Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
2024-05-02sh: mach-sh03: Make sh03_rtc_settimeofday() staticGeert Uytterhoeven1-1/+1
arch/sh/boards/mach-sh03/rtc.c:123:5: warning: no previous prototype for ‘sh03_rtc_settimeofday’ [-Wmissing-prototypes] There are no users outside this file, so make it static. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Link: https://lore.kernel.org/r/95417f2a3eb1561af7c2ee064efbc3ef3f03dac3.1709579038.git.geert+renesas@glider.be Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
2024-05-02sh: mach-highlander: Add missing #include <mach/highlander.h>Geert Uytterhoeven1-0/+1
arch/sh/boards/mach-highlander/pinmux-r7785rp.c:9:13: warning: no previous prototype for ‘highlander_plat_pinmux_setup’ [-Wmissing-prototypes] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Link: https://lore.kernel.org/r/bbbc833d2c5b565122baaf9277ddf4a2f2cadead.1709579038.git.geert+renesas@glider.be Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
2024-05-02sh: traps: Make is_dsp_inst() staticGeert Uytterhoeven1-2/+2
If CONFIG_SH_DSP=y (e.g. se7343_defconfig): arch/sh/kernel/traps_32.c:572:5: warning: no previous prototype for ‘is_dsp_inst’ [-Wmissing-prototypes] There are no users outside this file, so make it static. While at it, convert the dummy for the CONFIG_SH_DSP=n case from a macro to a static inline function, to increase type-safety. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Link: https://lore.kernel.org/r/8525fe446e7f24649a83b8cd6ca8b736ab746b80.1709579038.git.geert+renesas@glider.be Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
2024-05-02sh: cache: Move forward declarations to <asm/cacheflush.h>Geert Uytterhoeven6-16/+17
arch/sh/kernel/cpu/init.c:99:29: warning: no previous prototype for 'l2_cache_init' [-Wmissing-prototypes] arch/sh/kernel/cpu/sh4a/setup-sh7723.c:422:6: warning: no previous prototype for 'l2_cache_init' [-Wmissing-prototypes] arch/sh/kernel/cpu/sh4a/setup-sh7724.c:842:6: warning: no previous prototype for 'l2_cache_init' [-Wmissing-prototypes] arch/sh/mm/cache-j2.c:48:13: warning: no previous prototype for 'j2_cache_init' [-Wmissing-prototypes] arch/sh/mm/cache-sh2.c:85:13: warning: no previous prototype for 'sh2_cache_init' [-Wmissing-prototypes] arch/sh/mm/cache-sh2a.c:181:13: warning: no previous prototype for 'sh2a_cache_init' [-Wmissing-prototypes] arch/sh/mm/cache-sh3.c:90:13: warning: no previous prototype for 'sh3_cache_init' [-Wmissing-prototypes] arch/sh/mm/cache-sh4.c:384:13: warning: no previous prototype for 'sh4_cache_init' [-Wmissing-prototypes] arch/sh/mm/cache-shx3.c:18:13: warning: no previous prototype for 'shx3_cache_init' [-Wmissing-prototypes] arch/sh/mm/flush-sh4.c:106:13: warning: no previous prototype for 'sh4__flush_region_init' [-Wmissing-prototypes] arch/sh/mm/cache-sh7705.c:190:13: warning: no previous prototype for 'sh7705_cache_init' [-Wmissing-prototypes] Fix this by moving all cache-related forward declarations to <asm/cacheflush.h>, and by including the latter where needed. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Link: https://lore.kernel.org/r/f47ab87636d16db4c47bebe1bf62650045f61989.1709579038.git.geert+renesas@glider.be Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
2024-05-02sh: dma: Remove unused functionalityGeert Uytterhoeven2-123/+0
dma_extend(), get_dma_info_by_name(), register_chan_caps(), and request_dma_bycap() are unused. Remove them, and all related code. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Link: https://lore.kernel.org/r/2beb81fdd7592a94329e3c9a6ba56959f6094019.1709326528.git.geert+renesas@glider.be Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
2024-05-02sh: dwarf: Make dwarf_lookup_fde() staticGeert Uytterhoeven1-1/+1
arch/sh/kernel/dwarf.c:347:19: warning: no previous prototype for 'dwarf_lookup_fde' [-Wmissing-prototypes] There are no users outside this file, so make it static. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Link: https://lore.kernel.org/r/55e8261a354e8ec4d375754e404c6c1d303af715.1709326528.git.geert+renesas@glider.be Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
2024-05-02sh: kprobes: Remove unneeded kprobe_opcode_t castsGeert Uytterhoeven1-2/+2
There is no need to cast a kprobe_opcode_t pointer to a kprobe_opcode_t pointer. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Link: https://lore.kernel.org/r/fc22b990d869fc2005990159d8072ae2774b1396.1709326528.git.geert+renesas@glider.be Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
2024-05-02sh: kprobes: Make trampoline_probe_handler() staticGeert Uytterhoeven1-1/+1
arch/sh/kernel/kprobes.c:299:15: warning: no previous prototype for 'trampoline_probe_handler' [-Wmissing-prototypes] There are no users outside this file, so make it static. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Link: https://lore.kernel.org/r/42f30b7f767ee1293f6e687a605f7d907ae2daa6.1709326528.git.geert+renesas@glider.be Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
2024-05-02sh: kprobes: Merge arch_copy_kprobe() into arch_prepare_kprobe()Geert Uytterhoeven1-6/+1
arch/sh/kernel/kprobes.c:52:16: warning: no previous prototype for 'arch_copy_kprobe' [-Wmissing-prototypes] Although SH kprobes support was only merged in v2.6.28, it missed the earlier removal of the arch_copy_kprobe() callback in v2.6.15. Based on the powerpc part of commit 49a2a1b83ba6fa40 ("[PATCH] kprobes: changed from using spinlock to mutex"). Fixes: d39f5450146ff39f ("sh: Add kprobes support.") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Link: https://lore.kernel.org/r/717d47a19689cc944fae6e981a1ad7cae1642c89.1709326528.git.geert+renesas@glider.be Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
2024-05-02sh: smp: Fix missing prototypesGeert Uytterhoeven1-1/+3
arch/sh/kernel/smp.c:173:17: warning: no previous prototype for 'start_secondary' [-Wmissing-prototypes] arch/sh/kernel/smp.c:324:5: warning: no previous prototype for 'setup_profiling_timer' [-Wmissing-prototypes] Make start_secondary() static, as it is only used in this file. Include <linux/profile.h> to fix the other warning. There are no users outside this file, so make it static. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Link: https://lore.kernel.org/r/6b6b9a84b30ee56f57f409a7550c69d4aece5dc3.1709326528.git.geert+renesas@glider.be Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
2024-05-02sh: sh7786: Remove unused sh7786_usb_use_exclock()Geert Uytterhoeven1-14/+0
arch/sh/kernel/cpu/sh4a/setup-sh7786.c:411:13: warning: no previous prototype for 'sh7786_usb_use_exclock' [-Wmissing-prototypes] Upstream never had a user of sh7786_usb_use_exclock(), remove it. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Link: https://lore.kernel.org/r/a87c6c0edcf81937b8eb2c899d286d82d71ad513.1709326528.git.geert+renesas@glider.be Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
2024-05-02sh: sh2a: Add missing #include <asm/processor.h>Geert Uytterhoeven1-0/+2
arch/sh/kernel/cpu/sh2a/opcode_helper.c:34:14: warning: no previous prototype for 'instruction_size' [-Wmissing-prototypes] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Link: https://lore.kernel.org/r/8314dd9a966394dd1fd82d88095c57d9778fcfc9.1709326528.git.geert+renesas@glider.be Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
2024-05-02sh: dma: Remove unused dmac_search_free_channel()Geert Uytterhoeven1-27/+0
arch/sh/drivers/dma/dma-api.c:164:5: warning: no previous prototype for 'dmac_search_free_channel' [-Wmissing-prototypes] dmac_search_free_channel() never had a user in upstream, remove it. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Link: https://lore.kernel.org/r/82d5efdde44f9489c5a7d11d0a19750445116c95.1709326528.git.geert+renesas@glider.be Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
2024-05-02sh: math-emu: Add missing #include <asm/fpu.h>Geert Uytterhoeven1-0/+2
arch/sh/math-emu/math.c:492:5: warning: no previous prototype for 'do_fpu_inst' [-Wmissing-prototypes] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Link: https://lore.kernel.org/r/cfda1ba2eadb75e2793e67d43df42fe4c04e4fcf.1709326528.git.geert+renesas@glider.be Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
2024-05-02sh: nommu: Add missing #include <asm/cacheflush.h>Geert Uytterhoeven1-0/+2
arch/sh/mm/nommu.c:76:13: warning: no previous prototype for 'kmap_coherent_init' [-Wmissing-prototypes] arch/sh/mm/nommu.c:80:7: warning: no previous prototype for 'kmap_coherent' [-Wmissing-prototypes] arch/sh/mm/nommu.c:86:6: warning: no previous prototype for 'kunmap_coherent' [-Wmissing-prototypes] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Link: https://lore.kernel.org/r/d4b2a43fcedddee3d27cfd87ff2e0bf511588aa0.1709326528.git.geert+renesas@glider.be Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
2024-05-02sh: ftrace: Fix missing prototypesGeert Uytterhoeven2-8/+12
arch/sh/kernel/ftrace.c:130:6: warning: no previous prototype for ‘arch_ftrace_nmi_enter’ [-Wmissing-prototypes] arch/sh/kernel/ftrace.c:140:6: warning: no previous prototype for ‘arch_ftrace_nmi_exit’ [-Wmissing-prototypes] arch/sh/kernel/ftrace.c:316:6: warning: no previous prototype for ‘prepare_ftrace_return’ [-Wmissing-prototypes] Fix this by moving existing forward declarations to <asm/ftrace.h>, and adding the missing forward declaration for prepare_ftrace_return(). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Link: https://lore.kernel.org/r/910c8846a025e1c3b744a83ddf8e2816a3c5569d.1709326528.git.geert+renesas@glider.be Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
2024-05-02sh: hw_breakpoint: Add missing forward declaration for arch_bp_generic_fields()Geert Uytterhoeven1-0/+2
arch/sh/kernel/hw_breakpoint.c:135:5: warning: no previous prototype for ‘arch_bp_generic_fields’ [-Wmissing-prototypes] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Link: https://lore.kernel.org/r/566af354bf51ddc38e9eb95eac51ec00c4e42024.1709326528.git.geert+renesas@glider.be Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
2024-05-02sh: traps: Add missing #include <asm/setup.h>Geert Uytterhoeven1-0/+1
arch/sh/kernel/traps_32.c:735:6: warning: no previous prototype for ‘per_cpu_trap_init’ [-Wmissing-prototypes] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Link: https://lore.kernel.org/r/a7750e57cc077ca6e27d0b9bd6b123d42894bc17.1709326528.git.geert+renesas@glider.be Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
2024-05-02sh: return_address: Add missing #include <asm/ftrace.h>Geert Uytterhoeven1-0/+2
arch/sh/kernel/return_address.c:49:7: warning: no previous prototype for ‘return_address’ [-Wmissing-prototypes] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Link: https://lore.kernel.org/r/45685f62c9132aca5dc3c028471218393b51f34c.1709326528.git.geert+renesas@glider.be Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
2024-05-02sh: tlb: Add missing forward declaration for handle_tlbmiss()Geert Uytterhoeven2-0/+5
arch/sh/mm/tlbex_32.c:22:1: warning: no previous prototype for ‘handle_tlbmiss’ [-Wmissing-prototypes] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Link: https://lore.kernel.org/r/23ec2c88168bd5b7e294828221531eed2f3eede8.1709326528.git.geert+renesas@glider.be Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
2024-05-02sh: syscall: Add missing forward declaration for sys_cacheflush()Geert Uytterhoeven1-0/+1
arch/sh/kernel/sys_sh.c:58:16: warning: no previous prototype for ‘sys_cacheflush’ [-Wmissing-prototypes] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Link: https://lore.kernel.org/r/b1c218986fb77d78303626b43c97925809045018.1709326528.git.geert+renesas@glider.be Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
2024-05-02sh: fpu: Add missing forward declarationsGeert Uytterhoeven1-0/+3
arch/sh/kernel/cpu/sh4/fpu.c:389:6: warning: no previous prototype for ‘float_raise’ [-Wmissing-prototypes] arch/sh/kernel/cpu/sh4/fpu.c:394:5: warning: no previous prototype for ‘float_rounding_mode’ [-Wmissing-prototypes] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Link: https://lore.kernel.org/r/1847145fc2181313b78bea8a81e6f0269d765968.1709326528.git.geert+renesas@glider.be Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
2024-05-02sh: pgtable: Fix missing prototypesGeert Uytterhoeven1-1/+3
arch/sh/mm/pgtable.c:12:6: warning: no previous prototype for 'pgd_ctor' [-Wmissing-prototypes] arch/sh/mm/pgtable.c:34:8: warning: no previous prototype for 'pgd_alloc' [-Wmissing-prototypes] arch/sh/mm/pgtable.c:39:6: warning: no previous prototype for 'pgd_free' [-Wmissing-prototypes] arch/sh/mm/pgtable.c:45:6: warning: no previous prototype for 'pud_populate' [-Wmissing-prototypes] arch/sh/mm/pgtable.c:50:8: warning: no previous prototype for 'pmd_alloc_one' [-Wmissing-prototypes] arch/sh/mm/pgtable.c:55:6: warning: no previous prototype for 'pmd_free' [-Wmissing-prototypes] Make pgd_ctor() static, as it is only used in this file. Include <asm/pgalloc.h> to fix the other warnings. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Link: https://lore.kernel.org/r/aa1328ea3327d6685aab76d5787cb77c996052c0.1709326528.git.geert+renesas@glider.be Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
2024-03-24Merge tag 'efi-fixes-for-v6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efiLinus Torvalds1-0/+9
Pull EFI fixes from Ard Biesheuvel: - Fix logic that is supposed to prevent placement of the kernel image below LOAD_PHYSICAL_ADDR - Use the firmware stack in the EFI stub when running in mixed mode - Clear BSS only once when using mixed mode - Check efi.get_variable() function pointer for NULL before trying to call it * tag 'efi-fixes-for-v6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: efi: fix panic in kdump kernel x86/efistub: Don't clear BSS twice in mixed mode x86/efistub: Call mixed mode boot services on the firmware's stack efi/libstub: fix efi_random_alloc() to allocate memory at alloc_min or higher address
2024-03-24Merge tag 'x86-urgent-2024-03-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds14-85/+76
Pull x86 fixes from Thomas Gleixner: - Ensure that the encryption mask at boot is properly propagated on 5-level page tables, otherwise the PGD entry is incorrectly set to non-encrypted, which causes system crashes during boot. - Undo the deferred 5-level page table setup as it cannot work with memory encryption enabled. - Prevent inconsistent XFD state on CPU hotplug, where the MSR is reset to the default value but the cached variable is not, so subsequent comparisons might yield the wrong result and as a consequence the result prevents updating the MSR. - Register the local APIC address only once in the MPPARSE enumeration to prevent triggering the related WARN_ONs() in the APIC and topology code. - Handle the case where no APIC is found gracefully by registering a fake APIC in the topology code. That makes all related topology functions work correctly and does not affect the actual APIC driver code at all. - Don't evaluate logical IDs during early boot as the local APIC IDs are not yet enumerated and the invoked function returns an error code. Nothing requires the logical IDs before the final CPUID enumeration takes place, which happens after the enumeration. - Cure the fallout of the per CPU rework on UP which misplaced the copying of boot_cpu_data to per CPU data so that the final update to boot_cpu_data got lost which caused inconsistent state and boot crashes. - Use copy_from_kernel_nofault() in the kprobes setup as there is no guarantee that the address can be safely accessed. - Reorder struct members in struct saved_context to work around another kmemleak false positive - Remove the buggy code which tries to update the E820 kexec table for setup_data as that is never passed to the kexec kernel. - Update the resource control documentation to use the proper units. - Fix a Kconfig warning observed with tinyconfig * tag 'x86-urgent-2024-03-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/boot/64: Move 5-level paging global variable assignments back x86/boot/64: Apply encryption mask to 5-level pagetable update x86/cpu: Add model number for another Intel Arrow Lake mobile processor x86/fpu: Keep xfd_state in sync with MSR_IA32_XFD Documentation/x86: Document that resctrl bandwidth control units are MiB x86/mpparse: Register APIC address only once x86/topology: Handle the !APIC case gracefully x86/topology: Don't evaluate logical IDs during early boot x86/cpu: Ensure that CPU info updates are propagated on UP kprobes/x86: Use copy_from_kernel_nofault() to read from unsafe address x86/pm: Work around false positive kmemleak report in msr_build_context() x86/kexec: Do not update E820 kexec table for setup_data x86/config: Fix warning for 'make ARCH=x86_64 tinyconfig'
2024-03-24x86/efistub: Call mixed mode boot services on the firmware's stackArd Biesheuvel1-0/+9
Normally, the EFI stub calls into the EFI boot services using the stack that was live when the stub was entered. According to the UEFI spec, this stack needs to be at least 128k in size - this might seem large but all asynchronous processing and event handling in EFI runs from the same stack and so quite a lot of space may be used in practice. In mixed mode, the situation is a bit different: the bootloader calls the 32-bit EFI stub entry point, which calls the decompressor's 32-bit entry point, where the boot stack is set up, using a fixed allocation of 16k. This stack is still in use when the EFI stub is started in 64-bit mode, and so all calls back into the EFI firmware will be using the decompressor's limited boot stack. Due to the placement of the boot stack right after the boot heap, any stack overruns have gone unnoticed. However, commit 5c4feadb0011983b ("x86/decompressor: Move global symbol references to C code") moved the definition of the boot heap into C code, and now the boot stack is placed right at the base of BSS, where any overruns will corrupt the end of the .data section. While it would be possible to work around this by increasing the size of the boot stack, doing so would affect all x86 systems, and mixed mode systems are a tiny (and shrinking) fraction of the x86 installed base. So instead, record the firmware stack pointer value when entering from the 32-bit firmware, and switch to this stack every time a EFI boot service call is made. Cc: <stable@kernel.org> # v6.1+ Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2024-03-24x86/boot/64: Move 5-level paging global variable assignments backTom Lendacky1-9/+7
Commit 63bed9660420 ("x86/startup_64: Defer assignment of 5-level paging global variables") moved assignment of 5-level global variables to later in the boot in order to avoid having to use RIP relative addressing in order to set them. However, when running with 5-level paging and SME active (mem_encrypt=on), the variables are needed as part of the page table setup needed to encrypt the kernel (using pgd_none(), p4d_offset(), etc.). Since the variables haven't been set, the page table manipulation is done as if 4-level paging is active, causing the system to crash on boot. While only a subset of the assignments that were moved need to be set early, move all of the assignments back into check_la57_support() so that these assignments aren't spread between two locations. Instead of just reverting the fix, this uses the new RIP_REL_REF() macro when assigning the variables. Fixes: 63bed9660420 ("x86/startup_64: Defer assignment of 5-level paging global variables") Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/2ca419f4d0de719926fd82353f6751f717590a86.1711122067.git.thomas.lendacky@amd.com
2024-03-24x86/boot/64: Apply encryption mask to 5-level pagetable updateTom Lendacky1-1/+1
When running with 5-level page tables, the kernel mapping PGD entry is updated to point to the P4D table. The assignment uses _PAGE_TABLE_NOENC, which, when SME is active (mem_encrypt=on), results in a page table entry without the encryption mask set, causing the system to crash on boot. Change the assignment to use _PAGE_TABLE instead of _PAGE_TABLE_NOENC so that the encryption mask is set for the PGD entry. Fixes: 533568e06b15 ("x86/boot/64: Use RIP_REL_REF() to access early_top_pgt[]") Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/8f20345cda7dbba2cf748b286e1bc00816fe649a.1711122067.git.thomas.lendacky@amd.com
2024-03-24x86/cpu: Add model number for another Intel Arrow Lake mobile processorTony Luck1-0/+1
This one is the regular laptop CPU. Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20240322161725.195614-1-tony.luck@intel.com
2024-03-24x86/fpu: Keep xfd_state in sync with MSR_IA32_XFDAdamos Ttofari2-6/+13
Commit 672365477ae8 ("x86/fpu: Update XFD state where required") and commit 8bf26758ca96 ("x86/fpu: Add XFD state to fpstate") introduced a per CPU variable xfd_state to keep the MSR_IA32_XFD value cached, in order to avoid unnecessary writes to the MSR. On CPU hotplug MSR_IA32_XFD is reset to the init_fpstate.xfd, which wipes out any stale state. But the per CPU cached xfd value is not reset, which brings them out of sync. As a consequence a subsequent xfd_update_state() might fail to update the MSR which in turn can result in XRSTOR raising a #NM in kernel space, which crashes the kernel. To fix this, introduce xfd_set_state() to write xfd_state together with MSR_IA32_XFD, and use it in all places that set MSR_IA32_XFD. Fixes: 672365477ae8 ("x86/fpu: Update XFD state where required") Signed-off-by: Adamos Ttofari <attofari@amazon.de> Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20240322230439.456571-1-chang.seok.bae@intel.com Closes: https://lore.kernel.org/lkml/20230511152818.13839-1-attofari@amazon.de
2024-03-23Merge tag 'powerpc-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds15-225/+268
Pull more powerpc updates from Michael Ellerman: - Handle errors in mark_rodata_ro() and mark_initmem_nx() - Make struct crash_mem available without CONFIG_CRASH_DUMP Thanks to Christophe Leroy and Hari Bathini. * tag 'powerpc-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/kdump: Split KEXEC_CORE and CRASH_DUMP dependency powerpc/kexec: split CONFIG_KEXEC_FILE and CONFIG_CRASH_DUMP kexec/kdump: make struct crash_mem available without CONFIG_CRASH_DUMP powerpc: Handle error in mark_rodata_ro() and mark_initmem_nx()
2024-03-23Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds11-184/+33
Pull ARM updates from Russell King: - remove a misuse of kernel-doc comment - use "Call trace:" for backtraces like other architectures - implement copy_from_kernel_nofault_allowed() to fix a LKDTM test - add a "cut here" line for prefetch aborts - remove unnecessary Kconfing entry for FRAME_POINTER - remove iwmmxy support for PJ4/PJ4B cores - use bitfield helpers in ptrace to improve readabililty - check if folio is reserved before flushing * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 9359/1: flush: check if the folio is reserved for no-mapping addresses ARM: 9354/1: ptrace: Use bitfield helpers ARM: 9352/1: iwmmxt: Remove support for PJ4/PJ4B cores ARM: 9353/1: remove unneeded entry for CONFIG_FRAME_POINTER ARM: 9351/1: fault: Add "cut here" line for prefetch aborts ARM: 9350/1: fault: Implement copy_from_kernel_nofault_allowed() ARM: 9349/1: unwind: Add missing "Call trace:" line ARM: 9334/1: mm: init: remove misuse of kernel-doc comment
2024-03-23Merge tag 'hardening-v6.9-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds1-1/+1
Pull more hardening updates from Kees Cook: - CONFIG_MEMCPY_SLOW_KUNIT_TEST is no longer needed (Guenter Roeck) - Fix needless UTF-8 character in arch/Kconfig (Liu Song) - Improve __counted_by warning message in LKDTM (Nathan Chancellor) - Refactor DEFINE_FLEX() for default use of __counted_by - Disable signed integer overflow sanitizer on GCC < 8 * tag 'hardening-v6.9-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: lkdtm/bugs: Improve warning message for compilers without counted_by support overflow: Change DEFINE_FLEX to take __counted_by member Revert "kunit: memcpy: Split slow memcpy tests into MEMCPY_SLOW_KUNIT_TEST" arch/Kconfig: eliminate needless UTF-8 character in Kconfig help ubsan: Disable signed integer overflow sanitizer on GCC < 8
2024-03-23x86/mpparse: Register APIC address only onceThomas Gleixner1-5/+5
The APIC address is registered twice. First during the early detection and afterwards when actually scanning the table for APIC IDs. The APIC and topology core warn about the second attempt. Restrict it to the early detection call. Fixes: 81287ad65da5 ("x86/apic: Sanitize APIC address setup") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Tested-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20240322185305.297774848@linutronix.de
2024-03-23x86/topology: Handle the !APIC case gracefullyThomas Gleixner1-0/+11
If there is no local APIC enumerated and registered then the topology bitmaps are empty. Therefore, topology_init_possible_cpus() will die with a division by zero exception. Prevent this by registering a fake APIC id to populate the topology bitmap. This also allows to use all topology query interfaces unconditionally. It does not affect the actual APIC code because either the local APIC address was not registered or no local APIC could be detected. Fixes: f1f758a80516 ("x86/topology: Add a mechanism to track topology via APIC IDs") Reported-by: Guenter Roeck <linux@roeck-us.net> Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Tested-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20240322185305.242709302@linutronix.de
2024-03-23x86/topology: Don't evaluate logical IDs during early bootThomas Gleixner1-5/+7
The local APICs have not yet been enumerated so the logical ID evaluation from the topology bitmaps does not work and would return an error code. Skip the evaluation during the early boot CPUID evaluation and only apply it on the final run. Fixes: 380414be78bf ("x86/cpu/topology: Use topology logical mapping mechanism") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Tested-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20240322185305.186943142@linutronix.de
2024-03-23x86/cpu: Ensure that CPU info updates are propagated on UPThomas Gleixner3-37/+14
The boot sequence evaluates CPUID information twice: 1) During early boot 2) When finalizing the early setup right before mitigations are selected and alternatives are patched. In both cases the evaluation is stored in boot_cpu_data, but on UP the copying of boot_cpu_data to the per CPU info of the boot CPU happens between #1 and #2. So any update which happens in #2 is never propagated to the per CPU info instance. Consolidate the whole logic and copy boot_cpu_data right before applying alternatives as that's the point where boot_cpu_data is in it's final state and not supposed to change anymore. This also removes the voodoo mb() from smp_prepare_cpus_common() which had absolutely no purpose. Fixes: 71eb4893cfaf ("x86/percpu: Cure per CPU madness on UP") Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Tested-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20240322185305.127642785@linutronix.de
2024-03-22Merge tag 'riscv-for-linus-6.9-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds68-550/+4316
Pull RISC-V updates from Palmer Dabbelt: - Support for various vector-accelerated crypto routines - Hibernation is now enabled for portable kernel builds - mmap_rnd_bits_max is larger on systems with larger VAs - Support for fast GUP - Support for membarrier-based instruction cache synchronization - Support for the Andes hart-level interrupt controller and PMU - Some cleanups around unaligned access speed probing and Kconfig settings - Support for ACPI LPI and CPPC - Various cleanus related to barriers - A handful of fixes * tag 'riscv-for-linus-6.9-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (66 commits) riscv: Fix syscall wrapper for >word-size arguments crypto: riscv - add vector crypto accelerated AES-CBC-CTS crypto: riscv - parallelize AES-CBC decryption riscv: Only flush the mm icache when setting an exec pte riscv: Use kcalloc() instead of kzalloc() riscv/barrier: Add missing space after ',' riscv/barrier: Consolidate fence definitions riscv/barrier: Define RISCV_FULL_BARRIER riscv/barrier: Define __{mb,rmb,wmb} RISC-V: defconfig: Enable CONFIG_ACPI_CPPC_CPUFREQ cpufreq: Move CPPC configs to common Kconfig and add RISC-V ACPI: RISC-V: Add CPPC driver ACPI: Enable ACPI_PROCESSOR for RISC-V ACPI: RISC-V: Add LPI driver cpuidle: RISC-V: Move few functions to arch/riscv riscv: Introduce set_compat_task() in asm/compat.h riscv: Introduce is_compat_thread() into compat.h riscv: add compile-time test into is_compat_task() riscv: Replace direct thread flag check with is_compat_task() riscv: Improve arch_get_mmap_end() macro ...
2024-03-22Merge tag 'loongarch-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongsonLinus Torvalds43-67/+921
Pull LoongArch updates from Huacai Chen: - Add objtool support for LoongArch - Add ORC stack unwinder support for LoongArch - Add kernel livepatching support for LoongArch - Select ARCH_HAS_CURRENT_STACK_POINTER in Kconfig - Select HAVE_ARCH_USERFAULTFD_MINOR in Kconfig - Some bug fixes and other small changes * tag 'loongarch-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: LoongArch/crypto: Clean up useless assignment operations LoongArch: Define the __io_aw() hook as mmiowb() LoongArch: Remove superfluous flush_dcache_page() definition LoongArch: Move {dmw,tlb}_virt_to_page() definition to page.h LoongArch: Change __my_cpu_offset definition to avoid mis-optimization LoongArch: Select HAVE_ARCH_USERFAULTFD_MINOR in Kconfig LoongArch: Select ARCH_HAS_CURRENT_STACK_POINTER in Kconfig LoongArch: Add kernel livepatching support LoongArch: Add ORC stack unwinder support objtool: Check local label in read_unwind_hints() objtool: Check local label in add_dead_ends() objtool/LoongArch: Enable orc to be built objtool/x86: Separate arch-specific and generic parts objtool/LoongArch: Implement instruction decoder objtool/LoongArch: Enable objtool to be built
2024-03-22kprobes/x86: Use copy_from_kernel_nofault() to read from unsafe addressMasami Hiramatsu (Google)1-1/+10
Read from an unsafe address with copy_from_kernel_nofault() in arch_adjust_kprobe_addr() because this function is used before checking the address is in text or not. Syzcaller bot found a bug and reported the case if user specifies inaccessible data area, arch_adjust_kprobe_addr() will cause a kernel panic. [ mingo: Clarified the comment. ] Fixes: cc66bb914578 ("x86/ibt,kprobes: Cure sym+0 equals fentry woes") Reported-by: Qiang Zhang <zzqq0103.hey@gmail.com> Tested-by: Jinghao Jia <jinghao7@illinois.edu> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/171042945004.154897.2221804961882915806.stgit@devnote2
2024-03-22x86/pm: Work around false positive kmemleak report in msr_build_context()Anton Altaparmakov1-5/+5
Since: 7ee18d677989 ("x86/power: Make restore_processor_context() sane") kmemleak reports this issue: unreferenced object 0xf68241e0 (size 32): comm "swapper/0", pid 1, jiffies 4294668610 (age 68.432s) hex dump (first 32 bytes): 00 cc cc cc 29 10 01 c0 00 00 00 00 00 00 00 00 ....)........... 00 42 82 f6 cc cc cc cc cc cc cc cc cc cc cc cc .B.............. backtrace: [<461c1d50>] __kmem_cache_alloc_node+0x106/0x260 [<ea65e13b>] __kmalloc+0x54/0x160 [<c3858cd2>] msr_build_context.constprop.0+0x35/0x100 [<46635aff>] pm_check_save_msr+0x63/0x80 [<6b6bb938>] do_one_initcall+0x41/0x1f0 [<3f3add60>] kernel_init_freeable+0x199/0x1e8 [<3b538fde>] kernel_init+0x1a/0x110 [<938ae2b2>] ret_from_fork+0x1c/0x28 Which is a false positive. Reproducer: - Run rsync of whole kernel tree (multiple times if needed). - start a kmemleak scan - Note this is just an example: a lot of our internal tests hit these. The root cause is similar to the fix in: b0b592cf0836 x86/pm: Fix false positive kmemleak report in msr_build_context() ie. the alignment within the packed struct saved_context which has everything unaligned as there is only "u16 gs;" at start of struct where in the past there were four u16 there thus aligning everything afterwards. The issue is with the fact that Kmemleak only searches for pointers that are aligned (see how pointers are scanned in kmemleak.c) so when the struct members are not aligned it doesn't see them. Testing: We run a lot of tests with our CI, and after applying this fix we do not see any kmemleak issues any more whilst without it we see hundreds of the above report. From a single, simple test run consisting of 416 individual test cases on kernel 5.10 x86 with kmemleak enabled we got 20 failures due to this, which is quite a lot. With this fix applied we get zero kmemleak related failures. Fixes: 7ee18d677989 ("x86/power: Make restore_processor_context() sane") Signed-off-by: Anton Altaparmakov <anton@tuxera.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: "Rafael J. Wysocki" <rafael@kernel.org> Cc: stable@vger.kernel.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/20240314142656.17699-1-anton@tuxera.com
2024-03-22x86/kexec: Do not update E820 kexec table for setup_dataDave Young1-16/+1
crashkernel reservation failed on a Thinkpad t440s laptop recently. Actually the memblock reservation succeeded, but later insert_resource() failed. Test steps: kexec load -> /* make sure add crashkernel param eg. crashkernel=160M */ kexec reboot -> dmesg|grep "crashkernel reserved"; crashkernel memory range like below reserved successfully: 0x00000000d0000000 - 0x00000000da000000 But no such "Crash kernel" region in /proc/iomem The background story: Currently the E820 code reserves setup_data regions for both the current kernel and the kexec kernel, and it inserts them into the resources list. Before the kexec kernel reboots nobody passes the old setup_data, and kexec only passes fresh SETUP_EFI/SETUP_IMA/SETUP_RNG_SEED if needed. Thus the old setup data memory is not used at all. Due to old kernel updates the kexec e820 table as well so kexec kernel sees them as E820_TYPE_RESERVED_KERN regions, and later the old setup_data regions are inserted into resources list in the kexec kernel by e820__reserve_resources(). Note, due to no setup_data is passed in for those old regions they are not early reserved (by function early_reserve_memory), and the crashkernel memblock reservation will just treat them as usable memory and it could reserve the crashkernel region which overlaps with the old setup_data regions. And just like the bug I noticed here, kdump insert_resource failed because e820__reserve_resources has added the overlapped chunks in /proc/iomem already. Finally, looking at the code, the old setup_data regions are not used at all as no setup_data is passed in by the kexec boot loader. Although something like SETUP_PCI etc could be needed, kexec should pass the info as new setup_data so that kexec kernel can take care of them. This should be taken care of in other separate patches if needed. Thus drop the useless buggy code here. Signed-off-by: Dave Young <dyoung@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Jiri Bohac <jbohac@suse.cz> Cc: Eric DeVolder <eric.devolder@oracle.com> Cc: Baoquan He <bhe@redhat.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Link: https://lore.kernel.org/r/Zf0T3HCG-790K-pZ@darkstar.users.ipa.redhat.com
2024-03-21Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds1-1/+2
Pull arm64 fixes from Catalin Marinas: - Re-instate the CPUMASK_OFFSTACK option for arm64 when NR_CPUS > 256. The bug that led to the initial revert was the cpufreq-dt code not using zalloc_cpumask_var(). - Make the STARFIVE_STARLINK_PMU config option depend on 64BIT to prevent compile-test failures on 32-bit architectures due to missing writeq(). * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: perf: starfive: fix 64-bit only COMPILE_TEST condition ARM64: Dynamically allocate cpumasks and increase supported CPUs to 512
2024-03-21Merge tag 'kbuild-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuildLinus Torvalds9-26/+27
Pull Kbuild updates from Masahiro Yamada: - Generate a list of built DTB files (arch/*/boot/dts/dtbs-list) - Use more threads when building Debian packages in parallel - Fix warnings shown during the RPM kernel package uninstallation - Change OBJECT_FILES_NON_STANDARD_*.o etc. to take a relative path to Makefile - Support GCC's -fmin-function-alignment flag - Fix a null pointer dereference bug in modpost - Add the DTB support to the RPM package - Various fixes and cleanups in Kconfig * tag 'kbuild-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (67 commits) kconfig: tests: test dependency after shuffling choices kconfig: tests: add a test for randconfig with dependent choices kconfig: tests: support KCONFIG_SEED for the randconfig runner kbuild: rpm-pkg: add dtb files in kernel rpm kconfig: remove unneeded menu_is_visible() call in conf_write_defconfig() kconfig: check prompt for choice while parsing kconfig: lxdialog: remove unused dialog colors kconfig: lxdialog: fix button color for blackbg theme modpost: fix null pointer dereference kbuild: remove GCC's default -Wpacked-bitfield-compat flag kbuild: unexport abs_srctree and abs_objtree kbuild: Move -Wenum-{compare-conditional,enum-conversion} into W=1 kconfig: remove named choice support kconfig: use linked list in get_symbol_str() to iterate over menus kconfig: link menus to a symbol kbuild: fix inconsistent indentation in top Makefile kbuild: Use -fmin-function-alignment when available alpha: merge two entries for CONFIG_ALPHA_GAMMA alpha: merge two entries for CONFIG_ALPHA_EV4 kbuild: change DTC_FLAGS_<basetarget>.o to take the path relative to $(obj) ...
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.