| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Previous patch modified the standard used by acpi_gpiochip_find()
to match device nodes. Using the device node set in gc->gpiodev->d-
ev instead of gc->parent.
However, there is a situation in gpio-dwapb where the GPIO device
driver will set gc->fwnode for each port corresponding to a child
node under a GPIO device, so gc->gpiodev->dev will be assigned the
value of each child node in gpiochip_add_data().
gpio-dwapb.c:
128,31 static int dwapb_gpio_add_port(struct dwapb_gpio *gpio,
struct dwapb_port_property *pp,
unsigned int offs);
port->gc.fwnode = pp->fwnode;
693,39 static int dwapb_gpio_probe;
err = dwapb_gpio_add_port(gpio, &pdata->properties[i], i);
When other drivers request GPIO pin resources through the GPIO device
node provided by ACPI (corresponding to the parent node), the change
of the matching object to gc->gpiodev->dev in acpi_gpiochip_find()
only allows finding the value of each port (child node), resulting
in a failed request.
Reapply the condition of using gc->parent for match in acpi_gpio-
chip_find() in the code can compatible with the problem of gpio-dwapb,
and will not affect the two cases mentioned in the patch:
1. There is no setting for gc->fwnode.
2. The case that depends on using gc->fwnode for match.
Fixes: 5062e4c14b75 ("gpiolib: acpi: use the fwnode in acpi_gpiochip_find()")
Fixes: 067dbc1ea5ce ("gpiolib: acpi: Don't use GPIO chip fwnode in acpi_gpiochip_find()")
Signed-off-by: Devyn Liu <liudingyuan@huawei.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Following the relocation of the function call outside of
__acpi_find_gpio(), move the ACPI device NULL check to
acpi_can_fallback_to_crs().
Signed-off-by: Laura Nao <laura.nao@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reported-by: kernelci.org bot <bot@kernelci.org>
Closes: https://lore.kernel.org/all/20240426154208.81894-1-laura.nao@collabora.com/
Fixes: 49c02f6e901c ("gpiolib: acpi: Move acpi_can_fallback_to_crs() out of __acpi_find_gpio()")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
When line locked as IRQ it has no label assigned. Assign
the meaningful value to it.
Ex. (for the PCA9355 and MAX3111e chips connected to the system):
=== Before ===
PCA953x: interrupt
MAX3111e: interrupt
=== After ===
PCA953x: NIO1 GpioInt(0)
MAX3111e: URT0 GpioInt(0)
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
It's ambiguous to have a device-related index in the GPIO interrupt
label as most of the devices will have it the same or very similar.
Extend label with fwnode name for better granularity. It significantly
reduces the scope of searching among devices.
Ex. (for the PCA9355 and MAX3111e chips connected to the system):
=== Before ===
PCA953x: GpioInt() 0
MAX3111e: GpioInt() 0
=== After ===
PCA953x: NIO1 GpioInt(0)
MAX3111e: URT0 GpioInt(0)
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Pass the con_id instead of property so that callers won't repeat
the GPIO suffixes to try.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
New coming user may need to check for _CRS fallback slightly differently.
Move the current check out of the helper function to allow that user to
use it.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Now that we don't perform anything on the GPIO descriptor,
we may simplify the error path in newly introduced helper.
Do it so.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
We want to reuse it later on in the code. In particular, it helps
to clean up the users of acpi_dev_gpio_irq_wake_get_by().
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
It's better to parse the code when the usual pattern is being used,
i.e. checking for error condition first.
There is no functional or code generation change (tested in LLVM).
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The acpi_get_gpiod_by_index() never is called with adev being NULL.
Remove the redundant check.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Make acpi_gpio_count() take firmware node as a parameter in order
to be aligned with other functions and decouple from unused device
pointer. The latter helps to create a common fwnode_gpio_count()
in the future.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
The match function used in gpio_device_find() should not modify the
contents of passed opaque pointer, because such modification would not
be necessary for actual matching and it could lead to quite unreadable,
spaghetti code.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[Bartosz: fix coding style in header]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Spurious wakeups are reported on the GPD G1619-04 which
can be absolved by programming the GPIO to ignore wakeups.
Cc: stable@vger.kernel.org
Reported-and-tested-by: George Melikov <mail@gmelikov.ru>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3073
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Pull gpio updates from Bartosz Golaszewski:
"We don't have any new drivers. The loongson driver is getting extended
with support for new models. There's a big refactor of gpio-pca953x
and many small improvements to others.
The GPIO code in the kernel has acquired a lot of cruft over the years
as well as many abusers of the API across the kernel tree. This
release cycle we have started a major cleanup and improvement effort
that will most likely span several releases. We have started by
converting external users of struct gpio_chip to accessing the wrapper
around it - struct gpio_device. This is because the latter is
reference counted while the former is removed when the provider is
unbound. We also removed several instances of drivers accessing
private GPIOLIB structures and including the private header from
drivers/gpio/.
To that end you'll see several commits aimed at different subsystems
(acked by relevant maintainers) as well as two merges from the
x86/platform tree.
We'll then rework the locking in GPIOLIB which currently uses a big
spinlock for many different things and could use becoming more
fine-grained, especially as it doesn't even get the locking right.
We'll also use SRCU for protecting the gpio_chip pointer against
in-kernel hot-unplug crashes similar to what we saw triggered from
user-space and fixed with semaphores in gpiolib-cdev. The core GPIOLIB
is still vulnerable to these use-cases. I'm just mentioning the plans
here, this is not part of this PR.
You'll see some new instances of using __free(). We've added a
gpio_device_put cleanup helper similar to the put_device one
introduced by Peter Zijlstra and used it according to the preferred
pattern except where it didn't make sense.
GPIOLIB core:
- provide interfaces allowing users to retrieve, manage and query the
reference counted GPIO device instead of accessing the private
gpio_chip structure
- replace gpiochip_find() with gpio_device_find()
- remove unused acpi_get_and_request_gpiod()
- improve the ignore_interrupt functionality in GPIO ACPI
- correct notifier return codes in gpiolib-of
- unexport gpiod_set_transitory() as it's unused outside of core GPIO
code
- while there are still external users accessing struct gpio_chip,
let's make gpiochip_get_desc() public so that they at least use the
preferred helper
- improve locking for lookup tables
- annotate struct linereq with __counted_by
- improve GPIOLIB docs
- add an OF quirk for LED trigger sources
Driver improvements:
- convert all GPIO drivers with .remove() callbacks to using the new
variant returning void instead of int
- stop accessing the GPIOLIB private structures in gpio-mockup,
i2c-mux-gpio, hte-tegra194, gpio-sim
- use the recommended pattern for autofree variables in gpio-sim
- add support for more models to gpio-loongson
- use a notifier chain to notify other blocks about interrupts in
gpio-eic-sprd instead of looking up GPIO devices on every interrupt
- convert gpio-pca953x and gpio-fx6408 to using the maple tree regmap
cache
- don't include GPIOLIB internal headers in drivers which don't need
them
- move the ingenic NAND quirk into gpiolib-of
- add an ignore interrupt quirk for Peaq C1010
- drop static GPIO base from gpio-omap, gpio-f7188x
- use the preferred device_get_match_data() function in drivers that
still don't
- refactor gpio-pca953x: switch to using DEFINE_SIMPLE_DEV_PM_OPS(),
use cleanup helpers, use dev_err_probe() where it makes sense,
fully convert to using devres and some other minor tweaks
DT bindings:
- add support for a new model to gpio-vf610 and update existing
properties
- add support for more loongson models
- add missing support for imx models that are used but undocumented
- convert bindings for Intel IXP4xx to schema
Minor stuff:
- deprecate gpio-mockup in favor of gpio-sim
- include missing headers here and there
- stop using gpiochip_find() in OMAP1 board files
- minor tweaks in gpio-vf610, gpio-hisi
- remove unneeded 'extern' specifiers from headers"
* tag 'gpio-updates-for-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (108 commits)
hte: tegra194: add GPIOLIB dependency
hte: tegra194: don't access struct gpio_chip
gpiolib: provide gpio_device_get_base()
i2c: mux: gpio: don't fiddle with GPIOLIB internals
gpiolib: provide gpiod_to_gpio_device()
gpiolib: provide gpio_device_to_device()
gpio: hisi: Fix format specifier
gpiolib: provide gpio_device_find_by_fwnode()
gpio: acpi: remove acpi_get_and_request_gpiod()
gpio: Use device_get_match_data()
gpio: vf610: update comment for i.MX8ULP and i.MX93 legacy compatibles
platform/x86: int3472: Switch to devm_get_gpiod()
platform/x86: int3472: Stop using gpiod_toggle_active_low()
platform/x86: int3472: Add new skl_int3472_gpiod_get_from_temp_lookup() helper
platform/x86: int3472: Add new skl_int3472_fill_gpiod_lookup() helper
gpio: vf610: simplify code by dropping data check
gpio: vf610: add i.MX8ULP of_device_id entry
dt-bindings: gpio: vf610: add i.MX95 compatible
dt-bindings: gpio: vf610: correct i.MX8ULP and i.MX93
dt-bindings: gpio: vf610: update gpio-ranges
...
|
|
When refactoring the acpi_get_gpiod_from_data() the change missed
cleaning up the variable on stack. Add missing memset().
Reported-by: Ferry Toth <ftoth@exalondelft.nl>
Fixes: 16ba046e86e9 ("gpiolib: acpi: teach acpi_find_gpio() to handle data-only nodes")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
With no more users, we can remove acpi_get_and_request_gpiod().
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
We're porting all users of gpiochip_find() to using gpio_device_find().
Update the ACPI GPIO code.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
On the Peaq C1010 2-in-1 INT33FC:00 pin 3 is connected to
a "dolby" button. At the ACPI level an _AEI event-handler
is connected which sets an ACPI variable to 1 on both
edges. This variable can be polled + cleared to 0 using WMI.
Since the variable is set on both edges the WMI interface is pretty
useless even when polling. So instead of writing a custom WMI
driver for this the x86-android-tablets code instantiates
a gpio-keys platform device for the "dolby" button.
Add an ignore_interrupt quirk for INT33FC:00 pin 3 on the Peaq C1010,
so that it is not seen as busy when the gpio-keys driver requests it.
Note this replaces a hack in x86-android-tablets where it would
call acpi_gpiochip_free_interrupts() on the INT33FC:00 GPIO
controller. acpi_gpiochip_free_interrupts() is considered private
(internal) gpiolib API so x86-android-tablets should stop using it.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20230909141816.58358-3-hdegoede@redhat.com
|
|
In some cases where a broken AEI is present for a GPIO and the GPIO
is listed in the ignore_interrupt list to avoid the broken event
handler, the kernel may want to use the GPIO for another purpose.
Before this change trying to use such a GPIO for another purpose would
fail, because the ignore_interrupt list was only checked after
the acpi_request_own_gpiod() call, causing the GPIO to already be
claimed even though it is listed in the ignore_interrupt list.
Fix this by moving the ignore_interrupt list to above
the acpi_request_own_gpiod() call.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20230909141816.58358-2-hdegoede@redhat.com
|
|
GPIO library should rely only on the GPIO device's fwnode.
Hence, replace GPIO chip fwnode usage by respective handle
of the GPIO device.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Benjamin Tissoires <bentiss@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Pull gpio updates from Bartosz Golaszewski:
"We have some new drivers, significant refactoring of existing intel
platforms, lots of improvements all around, mass conversion to using
immutable irqchips by drivers that had not been converted individually
yet and some changes in the core library code.
Summary:
New drivers:
- add a driver for the Loongson GPIO controller
- add a driver for the fxl6408 I2C GPIO expander
- add a GPIO module containing code common for Intel Elkhart Lake and
Merrifield platforms
- add a driver for the Intel Elkhart Lake platform reusing the code
from the intel tangier library
GPIOLIB core:
- GPIO ACPI improvements
- simplify gpiochip_add_data_with_keys() fwnode handling
- cleanup header inclusions (remove unneeded ones, order the rest
alphabetically)
- remove duplicate code (reuse krealloc() instead of open-coding it,
drop a duplicated check in gpiod_find_and_request())
- reshuffle the code to remove unnecessary forward declarations
- coding style cleanups and improvements
- add a helper for accessing device fwnodes
- small updates in docs
Driver improvements:
- convert all remaining GPIO irqchip drivers to using immutable
irqchips
- drop unnecessary of_match_ptr() macro expansions
- shrink the code in gpio-merrifield significantly by reusing the
code from gpio-tangier + minor tweaks to the driver code
- remove MODULE_LICENSE() from drivers that can only be built-in
- add device-tree support to gpio-loongson1
- use new regmap features in gpio-104-dio-48e and gpio-pcie-idio-24
- minor tweaks and fixes to gpio-xra1403, gpio-sim, gpio-tegra194,
gpio-omap, gpio-aspeed, gpio-raspberrypi-exp
- shrink code in gpio-ich and gpio-pxa
- Kconfig tweak for gpio-pmic-eic-sprd"
* tag 'gpio-updates-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (99 commits)
gpio: gpiolib: Simplify gpiochip_add_data_with_key() fwnode
gpiolib: Add gpiochip_set_data() helper
gpiolib: Move gpiochip_get_data() higher in the code
gpiolib: Check array_info for NULL only once in gpiod_get_array()
gpiolib: Replace open coded krealloc()
gpiolib: acpi: Add a ignore wakeup quirk for Clevo NL5xNU
gpiolib: acpi: Move ACPI device NULL check to acpi_get_driver_gpio_data()
gpiolib: acpi: use the fwnode in acpi_gpiochip_find()
gpio: mm-lantiq: Fix typo in the newly added header filename
sh: mach-x3proto: Add missing #include <linux/gpio/driver.h>
powerpc/40x: Add missing select OF_GPIO_MM_GPIOCHIP
gpio: xlp: Convert to immutable irq_chip
gpio: xilinx: Convert to immutable irq_chip
gpio: xgs-iproc: Convert to immutable irq_chip
gpio: visconti: Convert to immutable irq_chip
gpio: tqmx86: Convert to immutable irq_chip
gpio: thunderx: Convert to immutable irq_chip
gpio: stmpe: Convert to immutable irq_chip
gpio: siox: Convert to immutable irq_chip
gpio: rda: Convert to immutable irq_chip
...
|
|
commit 1796f808e4bb ("HID: i2c-hid: acpi: Stop setting wakeup_capable")
changed the policy such that I2C touchpads may be able to wake up the
system by default if the system is configured as such.
However on Clevo NL5xNU there is a mistake in the ACPI tables that the
TP_ATTN# signal connected to GPIO 9 is configured as ActiveLow and level
triggered but connected to a pull up. As soon as the system suspends the
touchpad loses power and then the system wakes up.
To avoid this problem, introduce a quirk for this model that will prevent
the wakeup capability for being set for GPIO 9.
This patch is analoge to a very similar patch for NL5xRU, just the DMI
string changed.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
It's logical to check ACPI device for NULL inside
acpi_get_driver_gpio_data() instead of requiring that
in each caller.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
While trying to set up an SSDT override for a USB-2-I2C chip [0],
I realized that the function acpi_gpiochip_find() was using the parent
of the gpio_chip to do the ACPI matching.
This works fine on my Ice Lake laptop because AFAICT, the DSDT presents
the PCI device INT3455 as the "Device (GPI0)", but is in fact handled
by the pinctrl driver in Linux.
The pinctrl driver then creates a gpio_chip device. This means that the
gc->parent device in that case is the GPI0 device from ACPI and everything
works.
However, in the hid-cp2112 case, the parent is the USB device, and the
gpio_chip is directly under that USB device. Which means that in this case
gc->parent points at the USB device, and so we can not do an ACPI match
towards the GPIO device.
I think it is safe to resolve the ACPI matching through the fwnode
because when we call gpiochip_add_data(), the first thing it does is
setting a proper gc->fwnode: if it is not there, it borrows the fwnode
of the parent.
So in my Ice Lake case, gc->fwnode is the one from the parent, meaning
that the ACPI handle we will get is the one from the GPI0 in the DSDT
(the pincrtl one). And in the hid-cp2112 case, we get the actual
fwnode from the gpiochip we created in the HID device, making it working.
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/linux-input/20230227140758.1575-1-kaehndan@gmail.com/T/#m592f18081ef3b95b618694a612ff864420c5aaf3 [0]
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
x86 ACPI boards which ship with only Android as their factory image usually
have pretty broken ACPI tables, relying on everything being hardcoded in
the factory kernel image and often disabling parts of the ACPI enumeration
kernel code to avoid the broken tables causing issues.
Part of this broken ACPI code is that sometimes these boards have _AEI
ACPI GPIO event handlers which are broken.
So far this has been dealt with in the platform/x86/x86-android-tablets.c
module, which contains various workarounds for these devices, by it calling
acpi_gpiochip_free_interrupts() on gpiochip-s with troublesome handlers to
disable the handlers.
But in some cases this is too late, if the handlers are of the edge type
then gpiolib-acpi.c's code will already have run them at boot.
This can cause issues such as GPIOs ending up as owned by "ACPI:OpRegion",
making them unavailable for drivers which actually need them.
Boards with these broken ACPI tables are already listed in
drivers/acpi/x86/utils.c for e.g. acpi_quirk_skip_i2c_client_enumeration().
Extend the quirks mechanism for a new acpi_quirk_skip_gpio_event_handlers()
helper, this re-uses the DMI-ids rather then having to duplicate the same
DMI table in gpiolib-acpi.c .
Also add the new ACPI_QUIRK_SKIP_GPIO_EVENT_HANDLERS quirk to existing
boards with troublesome ACPI gpio event handlers, so that the current
acpi_gpiochip_free_interrupts() hack can be removed from
x86-android-tablets.c .
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Rafael J. Wysocki <rjw@rjwysocki.net>
|
|
There is a few things done:
- include only the headers we are direct user of
- when pointer is in use, provide a forward declaration
- add missing headers
- group generic headers and subsystem headers
- sort each group alphabetically
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Pull gpio updates from Bartosz Golaszewski:
"A rather small update, there are no new drivers, just improvements and
refactoring in existing ones.
Thanks to migrating of several drivers to using generalized APIs and
dropping of OF interfaces in favor of using software nodes we're
actually removing more code than we're adding.
Core GPIOLIB:
- drop several OF interfaces after moving a significant part of the
code to using software nodes
- remove more interfaces referring to the global GPIO numberspace
that we're getting rid of
- improvements in the gpio-regmap library
- add helper for GPIO device reference counting
- remove unused APIs
- minor tweaks like sorting headers alphabetically
Extended support in existing drivers:
- add support for Tegra 234 PMC to gpio-tegra186
Driver improvements:
- migrate the 104-dio/idi family of drivers to using the regmap-irq
API
- migrate gpio-i8255 and gpio-mm to the GPIO regmap API
- clean-ups in gpio-pca953x
- remove duplicate assignments of of_gpio_n_cells in gpio-davinci,
gpio-ge, gpio-xilinx, gpio-zevio and gpio-wcd934x
- improvements to gpio-pcf857x: implement get/set_multiple callbacks,
use generic device properties instead of OF + minor tweaks
- fix OF-related header includes and Kconfig dependencies in
gpio-zevio
- dynamically allocate the GPIO base in gpio-omap
- use a dedicated printf specifier for printing fwnode info in
gpio-sim
- use dev_name() for the GPIO chip label in gpio-vf610
- other minor tweaks and fixes
Documentation:
- remove mentions of legacy API from comments in various places
- convert the DT binding documents to YAML schema for Fujitsu
MB86S7x, Unisoc GPIO and Unisoc EIC
- document the Unisoc UMS512 controller in DT bindings"
* tag 'gpio-updates-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (54 commits)
gpio: sim: Use %pfwP specifier instead of calling fwnode API directly
gpio: tegra186: remove unneeded loop in tegra186_gpio_init_route_mapping()
gpiolib: of: Move enum of_gpio_flags to its only user
gpio: mvebu: Use IS_REACHABLE instead of IS_ENABLED for CONFIG_PWM
gpio: zevio: Add missing header
gpio: Get rid of gpio_to_chip()
gpio: pcf857x: Drop unneeded explicit casting
gpio: pcf857x: Make use of device properties
gpio: pcf857x: Get rid of legacy platform data
gpio: rockchip: Do not mention legacy API in the code
gpio: wcd934x: Remove duplicate assignment of of_gpio_n_cells
gpio: zevio: Use proper headers and drop OF_GPIO dependency
gpio: zevio: Remove duplicate assignment of of_gpio_n_cells
gpio: xilinx: Remove duplicate assignment of of_gpio_n_cells
dt-bindings: gpio: Add compatible string for Unisoc UMS512
dt-bindings: gpio: Convert Unisoc EIC controller binding to yaml
dt-bindings: gpio: Convert Unisoc GPIO controller binding to yaml
gpio: ge: Remove duplicate assignment of of_gpio_n_cells
gpio: davinci: Remove duplicate assignment of of_gpio_n_cells
gpio: omap: use dynamic allocation of base
...
|
|
The commit 1796f808e4bb ("HID: i2c-hid: acpi: Stop setting wakeup_capable")
changed the policy such that I2C touchpads may be able to wake up the
system by default if the system is configured as such.
However for some devices there is a bug, that is causing the touchpad to
instantly wake up the device again once it gets deactivated. The root cause
is still under investigation (see Link tag).
To workaround this problem for the time being, introduce a quirk for this
model that will prevent the wakeup capability for being set for GPIO 16.
Fixes: 1796f808e4bb ("HID: i2c-hid: acpi: Stop setting wakeup_capable")
Link: https://lore.kernel.org/linux-acpi/20230210164636.628462-1-wse@tuxedocomputers.com/
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: <stable@vger.kernel.org> # v6.1+
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
All new drivers should use fwnode and / or parent to provide the
necessary information to the GPIO library.
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
commit 1796f808e4bb ("HID: i2c-hid: acpi: Stop setting wakeup_capable")
adjusted the policy to enable wakeup by default if the ACPI tables
indicated that a device was wake capable.
It was reported however that this broke suspend on at least two System76
systems in S3 mode and two Lenovo Gen2a systems, but only with S3.
When the machines are set to s2idle, wakeup behaves properly.
Configuring the GPIOs for wakeup with S3 doesn't work properly, so only
set it when the system supports low power idle.
Fixes: 1796f808e4bb ("HID: i2c-hid: acpi: Stop setting wakeup_capable")
Fixes: b38f2d5d9615c ("i2c: acpi: Use ACPI wake capability bit to set wake_irq")
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2357
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2162013
Reported-by: Nathan Smythe <ncsmythe@scruboak.org>
Tested-by: Nathan Smythe <ncsmythe@scruboak.org>
Suggested-by: Raul Rangel <rrangel@chromium.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
commit 1796f808e4bb ("HID: i2c-hid: acpi: Stop setting wakeup_capable")
changed the policy such that I2C touchpads may be able to wake up the
system by default if the system is configured as such.
However on Clevo NL5xRU there is a mistake in the ACPI tables that the
TP_ATTN# signal connected to GPIO 9 is configured as ActiveLow and level
triggered but connected to a pull up. As soon as the system suspends the
touchpad loses power and then the system wakes up.
To avoid this problem, introduce a quirk for this model that will prevent
the wakeup capability for being set for GPIO 9.
Fixes: 1796f808e4bb ("HID: i2c-hid: acpi: Stop setting wakeup_capable")
Reported-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1722#note_1720627
Co-developed-by: Werner Sembach <wse@tuxedocomputers.com>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Using the `ignore_wake` quirk or module parameter doesn't work for any pin
that has been specified in the _CRS instead of _AEI.
Extend the `acpi_gpio_irq_is_wake` check to cover both places.
Suggested-by: Raul Rangel <rrangel@chromium.org>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1722#note_1722335
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
intel-gpio for v6.2-1
* Miscellaneous updates to the core (cdev, acpi) and Intel Merrifield driver
The following is an automated git shortlog grouped by driver:
gpiolib:
- cdev: Fix typo in kernel doc for struct line
- acpi: Use METHOD_NAME__AEI macro for acpi_walk_resources
merrifield:
- Use str_enable_disable() helper
|
|
Ensure that all paths to obtain/look up GPIOD from generic
consumer-visible APIs go through the new gpiod_find_and_request()
helper, so that we can easily extend it with support for new firmware
mechanisms.
The only exception is OF-specific [devm_]gpiod_get_from_of_node() API
that is still being used by a couple of drivers and will be removed as
soon as patches converting them to use generic fwnode/device APIs are
accepted.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
There is no need for the generic parts of GPIOLIB to be aware of
implementation details of ACPI-bases lookups.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
In preparation of switching all ACPI-based GPIO lookups to go through
acpi_find_gpio() we need to make sure it can handle data-only ACPI
nodes, same as existing acpi_node_get_gpiod().
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
In preparation of switching all ACPI-based GPIO lookups to go through
acpi_find_gpio() let's change it to accept device node as its argument
as we do not always have access to device structure.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Using the METHOD_NAME__AEI macro instead of using "_AEI" directly.
Signed-off-by: Xiang Yang <xiangyang3@huawei.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Pull more ACPI updates from Rafael Wysocki:
"These fix two issues, in APEI and in the int3472 driver, clean up the
ACPI thermal driver, add ACPI support for non-GPE system wakeup events
and make the system reboot code use the S5 (system off) state by
default.
Specifics:
- Fix ACPI device object reference counting in (recently updated)
skl_int3472_fill_clk_pdata() (Andy Shevchenko).
- Fix a memory leak in APEI by avoiding to add a task_work to kernel
threads running when an asynchronous error is detected (Shuai Xue).
- Add ACPI support for handling system wakeups via GPIO wake capable
IRQs in addition to GPEs (Raul E Rangel).
- Make the system reboot code put ACPI-enabled systems into the S5
(system off) state which is necessary for some platforms to work as
expected (Kai-Heng Feng).
- Make the white space usage in the ACPI thermal driver more
consistent and drop redundant code from it (Rafael Wysocki)"
* tag 'acpi-6.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: thermal: Drop some redundant code
ACPI: thermal: Drop redundant parens from expressions
ACPI: thermal: Use white space more consistently
platform/x86: int3472: Don't leak reference on error
ACPI: APEI: do not add task_work to kernel thread to avoid memory leak
PM: ACPI: reboot: Reinstate S5 for reboot
kernel/reboot: Add SYS_OFF_MODE_RESTART_PREPARE mode
ACPI: PM: Take wake IRQ into consideration when entering suspend-to-idle
i2c: acpi: Use ACPI wake capability bit to set wake_irq
ACPI: resources: Add wake_capable parameter to acpi_dev_irq_flags
gpiolib: acpi: Add wake_capable variants of acpi_dev_gpio_irq_get
|
|
The ACPI spec defines the SharedAndWake and ExclusiveAndWake share type
keywords. This is an indication that the GPIO IRQ can also be used as a
wake source. This change exposes the wake_capable bit so drivers can
correctly enable wake functionality instead of making an assumption.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Asus UM325UAZ has GPIO 18 programmed as both an interrupt and a wake
source, but confirmed with internal team on this design this pin is
floating and shouldn't have been programmed. This causes lots of
spurious IRQs on the system and horrendous battery life.
Add a quirk to ignore attempts to program this pin on this system.
Reported-by: Pavel Krc <reg.krn@pkrc.net>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216208
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
gpiolib-acpi already had support for ignoring a pin for wakeup, but
if an OEM configures a floating pin as an interrupt source then
stopping it from being a wakeup won't do much good to stop the
interrupt storm.
Add support for a module parameter and quirk infrastructure to
ignore interrupts as well.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
On top of looking at PULL_UP and PULL_DOWN flags, also look at
PULL_DISABLE and set the appropriate GPIO flag. The GPIO core will then
pass down this to controllers that support it.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
A pin that comes from ACPI tables is of unsigned type. This also applies
to the internal APIs which use unsigned int to store the pin. Convert
type for pin to be unsigned in the places where it's not yet true.
While at it, add a stub for acpi_get_and_request_gpiod() for the sake
of consistency in the APIs.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
When compiling with -Wformat, clang emits the following warning:
gpiolib-acpi.c:393:4: warning: format specifies type 'unsigned char' but the argument has type 'int' [-Wformat]
pin);
^~~
So warning that '%hhX' is paired with an 'int' is all just completely
mindless and wrong. Sadly, I can see a different bogus warning reason
why people would want to use '%02hhX'.
Again, the *sane* thing from a human perspective is to use '%02X. But
if the compiler doesn't do any range analysis at all, it could decide
that "Oh, that print format could need up to 8 bytes of space in the
result". Using '%02hhX' would cut that down to two.
And since we use
char ev_name[5];
and currently use "_%c%02hhX" as the format string, even a compiler
that doesn't notice that "pin <= 255" test that guards this all will
go "OK, that's at most 4 bytes and the final NUL termination, so it's
fine".
While a compiler - like gcc - that only sees that the original source
of the 'pin' value is a 'unsigned short' array, and then doesn't take
the "pin <= 255" into account, will warn like this:
gpiolib-acpi.c: In function 'acpi_gpiochip_request_interrupt':
gpiolib-acpi.c:206:24: warning: '%02X' directive writing between 2 and 4 bytes into a region of size 3 [-Wformat-overflow=]
sprintf(ev_name, "_%c%02X",
^~~~
gpiolib-acpi.c:206:20: note: directive argument in the range [0, 65535]
because gcc isn't being very good at that argument range analysis either.
In other words, the original use of 'hhx' was bogus to begin with, and
due to *another* compiler warning being bad, and we had that bad code
being written back in 2016 to work around _that_ compiler warning
(commit e40a3ae1f794: "gpio: acpi: work around false-positive
-Wstring-overflow warning").
Sadly, two different bad compiler warnings together does not make for
one good one.
It just makes for even more pain.
End result: I think the simplest and cleanest option is simply the
proposed change which undoes that '%hhX' change for gcc, and replaces
it with just using a slightly bigger stack allocation. It's not like
a 5-byte allocation is in any way likely to have saved any actual stack,
since all the other variables in that function are 'int' or bigger.
False-positive compiler warnings really do make people write worse
code, and that's a problem. But on a scale of bad code, I feel that
extending the buffer trivially is better than adding a pointless cast
that literally makes no sense.
At least in this case the end result isn't unreadable or buggy. We've
had several cases of bad compiler warnings that caused changes that
were actually horrendously wrong.
Fixes: e40a3ae1f794 ("gpio: acpi: work around false-positive -Wstring-overflow warning")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
It appears that GPIO ACPI library uses ACPI debounce values directly.
However, the GPIO library APIs expect the debounce timeout to be in
microseconds.
Convert ACPI value of debounce to microseconds.
While at it, document this detail where it is appropriate.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215664
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Fixes: 8dcb7a15a585 ("gpiolib: acpi: Take into account debounce settings")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
If the driver sets the fwnode in struct gpio_chip, let it take
precedence over the parent's fwnode.
This is a follow up to the commit 9126a738edc1 ("gpiolib: of: make
fwnode take precedence in struct gpio_chip").
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
When ACPI device pointer available use it, otherwise take parent of GPIO chip.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
If the IRQ is already in use, then acpi_dev_gpio_irq_get_by() really
should not change the type underneath the current owner.
I specifically hit an issue with this an a Chuwi Hi8 Super (CWI509) Bay
Trail tablet, when the Boot OS selection in the BIOS is set to Android.
In this case _STA for a MAX17047 ACPI I2C device wrongly returns 0xf and
the _CRS resources for this device include a GpioInt pointing to a GPIO
already in use by an _AEI handler, with a different type then specified
in the _CRS for the MAX17047 device. Leading to the acpi_dev_gpio_irq_get()
call done by the i2c-core-acpi.c code changing the type breaking the
_AEI handler.
Now this clearly is a bug in the DSDT of this tablet (in Android mode),
but in general calling irq_set_irq_type() on an IRQ which already is
in use seems like a bad idea.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
If all we want to manage is a single pointer, there's no need to
manually allocate and add a new devres. We can simply use
devm_add_action_or_reset() and shrink the code by a good bit.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
Devyn Liu
Laura Nao
Andy Shevchenko
Krzysztof Kozlowski
Mario Limonciello
Linus Torvalds
Bartosz Golaszewski
Hans de Goede
Werner Sembach
Benjamin Tissoires
Dmitry Torokhov
Xiang Yang
Raul E Rangel
Nuno Sá