aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/drivers/gpu/drm/amd/amdgpu/gfx_v12_0.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2025-06-03drm/amdgpu: Add userq fence support to SDMAv7.0Arunpravin Paneer Selvam1-5/+5
- Add userq fence support to SDMAv7.0. - GFX12's user fence irq src id differs from GFX11's, hence we need create a new irq srcid header file for GFX12. User fence irq src id information- GFX11 and SDMA6.0 - 0x43 GFX12 and SDMA7.0 - 0x46 Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-30drm/amdgpu: remove DRM_AMDGPU_NAVI3X_USERQ config for UQArvind Yadav1-2/+0
DRM_AMDGPU_NAVI3X_USERQ config support is not required for usermode queue. v2: rebase. Cc: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Reviewed-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Arvind Yadav <Arvind.Yadav@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-22drm/amdgpu/gfx12: Add fw minimum version check for usermode queueArvind Yadav1-2/+5
This patch is load usermode queue based on FW support for gfx12. CP Ucode FW Vesion: [PFP = 2840, ME = 2780, MEC = 3050, MES = 123] v2: Addressed review comments from Alex - Just check the firmware versions directly. Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian Koenig <christian.koenig@amd.com> Cc: Shashank Sharma <shashank.sharma@amd.com> Cc: Sunil Khatri <sunil.khatri@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Sunil Khatri <sunil.khatri@amd.com> Signed-off-by: Arvind Yadav <Arvind.Yadav@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-21drm/amdgpu/gfx12: add support for TMZ queues to mqd_initAlex Deucher1-0/+4
Set up TMZ for queues. Reviewed-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Jesse.Zhang <Jesse.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-21drm/amdgpu/userq: rework driver parameterAlex Deucher1-2/+16
Replace disable_kq parameter with user_queue parameter. The parameter has the following logic: -1 = auto (ASIC specific default) 0 = user queues disabled 1 = user queues enabled and kernel queues enabled (if supported) 2 = user queues enabled and kernel queues disabled The default behavior (-1) is currently the same as 0 for current ASICs. To enable user queues (in addition to kernel queues) set user_queue=1. To enable user queues and disable kernel queues (to make all resources available to user queues), set user_queue=2. Reviewed-by: Sunil Khatri <sunil.khatri@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-21drm/amdgpu/gfx12: properly reference EOP interrupts for userqsAlex Deucher1-3/+6
Regardless of whether we disable kernel queues, we need to take an extra reference to the pipe interrupts for user queues to make sure they stay enabled in case we disable them for kernel queues. Reviewed-by: Sunil Khatri <sunil.khatri@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-11drm/amdgpu: Use the right function for hdp flushLijo Lazar1-3/+3
There are a few prechecks made before HDP flush like a flush is not required on APU bare metal. Using hdp callback directly bypasses those checks. Use amdgpu_device_flush_hdp which takes care of prechecks. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-11drm/amdgpu/gfx12: Implement the GFX12 KCQ pipe resetPrike Liang1-2/+87
Implement the GFX12 KCQ pipe reset, and disable the GFX12 kernel compute queue until the CPFW fully supports it. Signed-off-by: Prike Liang <Prike.Liang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-08drm/amdgpu/gfx12: add support for disable_kqAlex Deucher1-53/+114
Plumb in support for disabling kernel queues. v2: use ring counts per Felix' suggestion v3: fix stream fault handler, enable EOP interrupts v4: fix MEC interrupt offset (Sunil) v5: clean up after removing extra sched.ready settings Reviewed-by: Sunil Khatri <sunil.khatri@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-08drm/amdgpu/gfx12: split userq setup to a separate switchAlex Deucher1-6/+14
Add a separate switch statement for the userq callback assignment so that we can assign the callbacks for each asic as the firmware becomes available. Reviewed-by: Sunil Khatri <sunil.khatri@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-08drm/amdgpu: remove is_mes_queue flagAlex Deucher1-114/+29
This was leftover from MES bring up when we had MES user queues in the kernel. It's no longer used so remove it. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-08drm/amdgpu: add userq firmware version checksAlex Deucher1-2/+5
Currently disabled until the firmwares are officially released. Reviewed-by: Prike Liang <Prike.Liang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-08drm/amdgpu: Add mqd for userq compute queueArunpravin Paneer Selvam1-0/+4
Add mqd for userq compute queue for gfx11/gfx12 Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-08drm/amdgpu: enable userqueue secure sem for GFX 12Arunpravin Paneer Selvam1-13/+14
- Add a field in struct amdgpu_mqd_prop for userqueue secure sem fence address since now we have a generic file for mes_userqueue.c - Add secure sem fence address mqd support to gfx12 into their corresponding init functions. - Enable secure semaphore IRQ handling V2: Address review comment from Alex: Use fence_address instead of fenceaddress (Shashank) Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian Koenig <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Signed-off-by: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com> Signed-off-by: Shashank Sharma <shashank.sharma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-08drm/amdgpu: enable userqueue support for GFX12Somalapuram Amaranath1-0/+5
This patch enables Usermode queue support across GFX, Compute and SDMA IPs on GFX12/SDMA7. It typically reuses Navi3X userqueue IP functions to create and destroy MQDs. v2: rebase on proposed changes (Alex) Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian Koenig <christian.koenig@amd.com> Cc: Arvind Yadav <arvind.yadav@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com> Signed-off-by: Shashank Sharma <shashank.sharma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-08drm/amdgpu/gfx12: update mqd init for UQAlex Deucher1-0/+6
Set the addresses for the UQ metadata. V2: Fix lower address mask (Shashank) V3: Use lower_32_bits() for MQD objects (Alex) Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Shashank Sharma <shashank.sharma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-08drm/amdgpu: add get_gfx_shadow_info callback for gfx12Shashank Sharma1-0/+29
This callback gets the size and alignment requirements for the gfx shadow buffer for preemption. Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian Koenig <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Shashank Sharma <shashank.sharma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-08drm/amdgpu/gfx12: dump full CP packet header FIFOsAlex Deucher1-6/+35
In dev core dump, dump the full header fifo for each queue. Each FIFO has 8 entries. Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com> Reviewed-by: Sunil Khatri <sunil.khatri@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-07drm/amdgpu/gfx12: Implement the gfx12 kgq pipe resetPrike Liang1-2/+67
Implement the GFX12 kgq pipe reset, and temporarily disable the GFX12 pipe reset until the CPFW fully support it. Signed-off-by: Prike Liang <Prike.Liang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-07drm/amdgpu/gfx: assign the actual me0 queues per pipeAlex Deucher1-1/+1
Set the actual number of queues per pipe for ME0 (gfx). This way we will dump all of the queues properly in dev core dumps. Reviewed-by: Sunil Khatri <sunil.khatri@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-07drm/amdgpu/gfx: decouple the number of kgqs from the hwAlex Deucher1-1/+2
The driver currently sets up one kgq per pipe. As such adev->gfx.me.num_queue_per_pipe is hardcoded to 1 everywhere. This is fine for kernel queues, but when we enable user queues we need to know that actual number of queues per pipe. Decouple the kgq setup from the actual hardware count. For dev core dumps and user queues, we want to know the actual number of queues per pipe. Reviewed-by: Sunil Khatri <sunil.khatri@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-26drm/amdgpu/gfx12: fix num_mecAlex Deucher1-1/+1
GC12 only has 1 mec. Fixes: 52cb80c12e8a ("drm/amdgpu: Add gfx v12_0 ip block support (v6)") Reviewed-by: Sunil Khatri <sunil.khatri@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-26drm/amdgpu: stop unmapping MQD for kernel queues v3Christian König1-87/+15
This looks unnecessary and actually extremely harmful since using kmap() is not possible while inside the ring reset. Remove all the extra mapping and unmapping of the MQDs. v2: also fix debugfs v3: fix coding style typo Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-21drm/amdgpu: remove invalid usage of sched.readyChristian König1-11/+0
I can't count how often I had to remove this nonsense. Probably doesn't need an explanation any more. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-13drm/amdgpu/gfx12: correct cleanup of 'me' field with gfx_v12_0_me_fini()Wentao Liang1-1/+1
In gfx_v12_0_cp_gfx_load_me_microcode_rs64(), gfx_v12_0_pfp_fini() is incorrectly used to free 'me' field of 'gfx', since gfx_v12_0_pfp_fini() can only release 'pfp' field of 'gfx'. The release function of 'me' field should be gfx_v12_0_me_fini(). Fixes: 52cb80c12e8a ("drm/amdgpu: Add gfx v12_0 ip block support (v6)") Signed-off-by: Wentao Liang <vulab@iscas.ac.cn> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-13drm/amdgpu/gfx12: don't read registers in mqd initAlex Deucher1-15/+33
Just use the default values. There's not need to get the value from hardware and it could cause problems if we do that at runtime and gfxoff is active. Reviewed-by: Mukul Joshi <mukul.joshi@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-25drm/amdgpu: update the handle ptr in is_idleSunil Khatri1-2/+2
Update the *handle to amdgpu_ip_block ptr for all functions pointers of is_idle. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-19drm/amdgpu: update the handle ptr in get_clockgating_stateSunil Khatri1-2/+2
Update the *handle to amdgpu_ip_block ptr for all functions pointers of get_clockgating_state. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-12drm/amdgpu: Clean up atom header file inclusionLijo Lazar1-1/+0
atom bios header files are not required in these files. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-12drm/amdgpu: update and cleanup PM4 headersAlex Deucher1-1/+0
Consolidate PM4 definitions. Most of these were previously only defined in UMDs. Add them here as well and sync with latest packets. Also no need to include soc15d.h on gfx10+. Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Suggested-by: Saurabh Verma <saurabh.verma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-12drm/amdgpu: add dynamic workload profile switching for gfx12Alex Deucher1-4/+22
Enable dynamic workload profile switching for gfx12. Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-28drm/amd/amdgpu: change the config of cgcg on gfx12Kenneth Feng1-11/+0
change the config of cgcg on gfx12 Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.12.x
2025-01-14drm/amdgpu/gfx12: Add Cleaner Shader Support for GFX12.0 GPUsSrinivasan Shanmugam1-0/+8
This commit enables the cleaner shader feature for GFX12.0 and GFX12.0.1 GPUs. The cleaner shader is important for clearing GPU resources such as Local Data Share (LDS), Vector General Purpose Registers (VGPRs), and Scalar General Purpose Registers (SGPRs) between workloads. - This feature ensures that GPU resources are reset between workloads, preventing data leaks and ensuring accurate computation. By enabling the cleaner shader, this update enhances the security and reliability of GPU operations on GFX12.0 hardware. Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-09drm/amdgpu: fix incorrect number of active RBs for gfx12Tim Huang1-2/+5
The RB bitmap should be global active RB bitmap & active RB bitmap based on active SA. Signed-off-by: Tim Huang <tim.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-09drm/amdgpu: enable gfx12 queue reset flagJesse Zhang1-1/+9
Enable the kgq and kcq queue reset flag Signed-off-by: Jesse Zhang <jesse.zhang@amd.com> Reviewed-by: Tim Huang <tim.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-18drm/amdgpu/gfx12: fix IP version checkAlex Deucher1-1/+1
Use the helper function rather than reading it directly. Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-18drm/amdgpu: drop the amdgpu_device argument from amdgpu_ib_freePierre-Eric Pelloux-Prayer1-1/+1
It's unused. Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-11drm/amdgpu/gfx12: clean up kcq reset codeJesse.zhang@amd.com1-13/+5
Replace kcq queue reset with existing function amdgpu_mes_reset_legacy_queue. Signed-off-by: Jesse Zhang <jesse.zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-10drm/amd: Add the capability to mark certain firmware as "required"Mario Limonciello1-0/+5
Some of the firmware that is loaded by amdgpu is not actually required. For example the ISP firmware on some SoCs is optional, and if it's not present the ISP IP block just won't be initialized. The firmware loader core however will show a warning when this happens like this: ``` Direct firmware load for amdgpu/isp_4_1_0.bin failed with error -2 ``` To avoid confusion for non-required firmware, adjust the amd-ucode helper to take an extra argument indicating if the firmware is required or optional. On optional firmware use firmware_request_nowarn() instead of request_firmware() to avoid the warnings. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Link: https://lore.kernel.org/amd-gfx/df71d375-7abd-4b32-97ce-15e57846eed8@amd.com/T/#t Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-10drm/amdgpu: pass ip_block in set_clockgating_stateBoyuan Zhang1-2/+2
Pass ip_block instead of adev in set_clockgating_state() callback functions. Modify set_clockgating_state()for all correspoding ip blocks. v2: remove all changes for is_idle(), remove type casting Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Sunil Khatri <sunil.khatri@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-10drm/amdgpu: pass ip_block in set_powergating_stateBoyuan Zhang1-2/+2
Pass ip_block instead of adev in set_powergating_state callback function. Modify set_powergating_state ip functions for all correspoding ip blocks. v2: fix a ip block index error. v3: remove type casting Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com> Suggested-by: Christian König <christian.koenig@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Sunil Khatri <sunil.khatri@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-10drm/amdgpu: reduce the mmio writes in kiq settingPrike Liang1-3/+1
There's no need to perform the two MMIO writes in the KIQ Setting registers programmed period, and reducing the MMIO writes will save the driver loading time. Signed-off-by: Prike Liang <Prike.Liang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-08drm/amdgpu: Add sysfs interface for gc reset maskJesse.zhang@amd.com1-0/+6
Add two sysfs interfaces for gfx and compute: gfx_reset_mask compute_reset_mask These interfaces are read-only and show the resets supported by the IP. For example, full adapter reset (mode1/mode2/BACO/etc), soft reset, queue reset, and pipe reset. V2: the sysfs node returns a text string instead of some flags (Christian) v3: add a generic helper which takes the ring as parameter and print the strings in the order they are applied (Christian) check amdgpu_gpu_recovery before creating sysfs file itself, and initialize supported_reset_types in IP version files (Lijo) v4: Fixing uninitialized variables (Tim) Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com> Suggested-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Tim Huang <tim.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-04drm/amdgpu: Group gfx sysfs functionsLijo Lazar1-2/+2
Make amdgpu_gfx_sysfs_init/fini functions as common entry points for all gfx related sysfs nodes. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-15drm/amdgpu/gfx12: Apply Isolation Enforcement to GFX & Compute ringsSrinivasan Shanmugam1-0/+4
This commit applies isolation enforcement to the GFX and Compute rings in the gfx_v12_0 module. The commit sets `amdgpu_gfx_enforce_isolation_ring_begin_use` and `amdgpu_gfx_enforce_isolation_ring_end_use` as the functions to be called when a ring begins and ends its use, respectively. `amdgpu_gfx_enforce_isolation_ring_begin_use` is called when a ring begins its use. This function cancels any scheduled `enforce_isolation_work` and, if necessary, signals the Kernel Fusion Driver (KFD) to stop the runqueue. `amdgpu_gfx_enforce_isolation_ring_end_use` is called when a ring ends its use. This function schedules `enforce_isolation_work` to be run after a delay. These functions are part of the Enforce Isolation Handler, which enforces shader isolation on AMD GPUs to prevent data leakage between different processes. Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-15drm/amdgpu: optimize fn gfx_v12_ring_insert_nopSunil Khatri1-4/+1
Optimize gfx_v12_ring_insert_nop() to call optimized version of amdgpu_ring_insert_nop instead of calling amdgpu_ring_write for number of nop times. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-08drm/amdgpu: fix typosAndrew Kreimer1-1/+1
Fix typos in comments: "wether -> whether". Signed-off-by: Andrew Kreimer <algonell@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/amdgpu/gfx12: Implement cleaner shader support for GFX12 hardwareSrinivasan Shanmugam1-2/+25
This patch adds support for the PACKET3_RUN_CLEANER_SHADER packet in the gfx_v12_0 module. This packet is used to emit the cleaner shader, which is used to clear GPU memory before it's reused, helping to prevent data leakage between different processes. Finally, the patch updates the ring function structures to include the new gfx_v12_0_ring_emit_cleaner_shader function. This allows the cleaner shader to be emitted as part of the ring's operations. Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/amdgpu: update the handle ptr in hw_finiSunil Khatri1-5/+3
Update the *handle to amdgpu_ip_block ptr for all functions pointers of hw_fini. Also update the ip_block ptr where ever needed as there were cyclic dependency of hw_fini on suspend and some followed clean up. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/amdgpu: update the handle ptr in hw_initSunil Khatri1-3/+3
Update the *handle to amdgpu_ip_block ptr for all functions pointers of hw_init. Also update the ip_block ptr where ever needed as there were cyclic dependency of hw_init on resume. v2: squash in isp fix Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.