| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Inside an FPU compilation unit DC_FP_START() and DC_FP_END() are defined
as BUILD_BUG(), so using them there fails the build. That was done on
purpose by
commit a574f53ed52e ("drm/amd/display: Permit DC_FP_START/END only in non-FP compilation units").
DC_RUN_WITH_PREEMPTION_ENABLED() was added later by
commit 3539437f354b ("drm/amd/display: Move FPU Guards From DML To DC - Part 1")
and defined as a plain pass-through in that same branch instead. A wrap
placed inside an FPU compilation unit therefore compiles cleanly, reads
as correct during review, and does nothing at all.
This is not hypothetical. While chasing a "scheduling while atomic"
splat in dc_create_plane_state() on PREEMPT_RT, an attempt to place the
guard further up the call chain, in dml21_add_phantom_plane() in
dc/dml2_0/dml21/dml21_utils.c, had no effect for exactly this reason:
dc/dml2_0/Makefile applies CC_FLAGS_FPU to every object under that
directory, and the top level Makefile adds -D_LINUX_FPU_COMPILATION_UNIT
to CC_FLAGS_FPU.
Define the macro as BUILD_BUG() there as well, so that the mistake is a
compile error rather than a guard that silently does nothing. The code
argument is kept in the expansion so the BUILD_BUG() failure is not
accompanied by set-but-unused diagnostics for variables assigned inside
it.
No current user is affected. dc/core/dc_stream.c and
dc/resource/dcn32/dcn32_resource.c are outside the dml directories, and
dc/dml2_0/dml2_wrapper.c and dc/dml2_0/dml21/dml21_wrapper.c are built
without the FPU flags because dc/dml2_0/Makefile replaces their CFLAGS
with CC_FLAGS_NO_FPU and removes CC_FLAGS_FPU.
Link: https://lore.kernel.org/all/1ead313022bc62dce1f42af9f855727eb9074443.camel@web.de/
Signed-off-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The commit cited by the Fixes tag added separate limited and full-range
BT.2020 YCbCr entries to the DCE output CSC tables, but populated both
entries with the same matrix copied from the common DC table. That
matrix combined full-range scaling with limited-range luma offset and was
incorrect for both limited and full-range output.
Replace the coefficients in both entries in the DCE paths with those from
the new COLOR_SPACE_YCBCR2020_LIMITED_TYPE
and COLOR_SPACE_YCBCR2020_FULL_TYPE entries in the preceding commit
("drm/amd/display: fix BT.2020 YCbCr limited output CSC matrix").
Fixes: 51e6668ab4ba ("drm/amd/display: add missing CSC entries for BT.2020 for DCE IPs")
Assisted-by: OpenAI-Codex:GPT-5.6-Sol
Tested-by: Igor Paunovic <royalnet026@gmail.com>
Tested-by: Satyajit Roy <sroy14@alum.utk.edu>
Signed-off-by: Nathan Lucas <nlucasgit@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
COLOR_SPACE_YCBCR2020_TYPE, which is selected for
COLOR_SPACE_2020_YCBCR_LIMITED color_space, has coefficients that are
incorrect for limited-range output. Its luma and chroma scaling is
full-range so output is too bright and colors are incorrect.
COLOR_SPACE_YCBCR2020_TYPE is closer to a full-range conversion matrix with
incorrect luma offset, so correct the luma offset for full-range and rename
it to COLOR_SPACE_YCBCR2020_FULL_TYPE.
Add COLOR_SPACE_YCBCR2020_LIMITED_TYPE with correct scaling and range for
limited-range output.
Fix related functions so COLOR_SPACE_YCBCR2020_LIMITED_TYPE and
COLOR_SPACE_YCBCR2020_FULL_TYPE are correctly selected based on
dc_color_space.
Derivation of both matrices follows ITU-T H.273:
Table 4, MatrixCoefficients 9, BT.2020-NCL weights:
KR = 0.2627, KB = 0.0593, KG = 1 - KR - KB = 0.6780.
Equations 45-47 in matrix form:
[ KR KG KB 0 ]
M2020_NCL = [ -KR/(2(1-KB)) -KG/(2(1-KB)) 1/2 0 ]
[ 1/2 -KG/(2(1-KR)) -KB/(2(1-KR)) 0 ]
[ 0 0 0 1 ]
Limited and Full transforms based on equations 30-32 and 36-38 with bit
depth 10, normalized by 1023:
[ 876/1023 0 0 64/1023 ]
MLimited = [ 0 896/1023 0 512/1023 ]
[ 0 0 896/1023 512/1023 ]
[ 0 0 0 1 ]
[ 1023/1023 0 0 0 ]
MFull = [ 0 1023/1023 0 512/1023 ]
[ 0 0 1023/1023 512/1023 ]
[ 0 0 0 1 ]
M2020_NCL_Limited = MLimited x M2020_NCL
M2020_NCL_Full = MFull x M2020_NCL
The upper three rows of M2020_NCL_* are stored in CR, Y, CB order. Each
M2020_NCL_* value is stored as Round(value * 8192) in its 16-bit
two's-complement representation.
Fixes: 973a9c810c78 ("drm/amd/display: Fix COLOR_SPACE_YCBCR2020_TYPE matrix")
Assisted-by: OpenAI-Codex:GPT-5.6-Sol
Tested-by: Igor Paunovic <royalnet026@gmail.com>
Tested-by: Satyajit Roy <sroy14@alum.utk.edu>
Signed-off-by: Nathan Lucas <nlucasgit@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
During compilation with allmodconfig with KASAN, there appears a Werror:
dml2_core_dcn5_funcs_mode_programming.c:11:13: error: stack frame size
(2400) exceeds limit (2048) in 'dcn5_mode_programming'
[-Werror,-Wframe-larger-than]
The dcn5/dcn6 dml2_core_*_funcs_mode_{programming,support} files were
split out of dml2_core_dcn4_calcs.o, which carries a relaxed
-Wframe-larger-than limit via $(frame_warn_flag) (2056 normally, or
4096 for clang + KASAN/KCSAN + COMPILE_TEST). The split-out files were
never added to the per-file CFLAGS override list, so they inherited the
strict global default of 2048. This is why these files trip the frame
size warning under KASAN while the larger dml2_core_dcn4_calcs.o does
not.
[How]
Apply the same $(frame_warn_flag) and CFLAGS_REMOVE handling used for
dml2_core_dcn4_calcs.o to the split-out files:
- dml2_core_dcn5_funcs_mode_programming.o
- dml2_core_dcn5_funcs_mode_support.o
- dml2_core_dcn6_funcs_mode_programming.o
- dml2_core_dcn6_funcs_mode_support.o
Fixes: 7f7d7ea1fa51 ("drm/amd/display: Add new sources for DCN6")
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Reported-by: Mark Brown <broonie@kernel.org>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
amdgpu_dm_crtc_set_vblank() dereferences acrtc_state->stream when
vblank is enabled/queried from DRM_IOCTL_MODE_CRTC_GET_SEQUENCE before
a stream is attached to it.
BUG: kernel NULL pointer dereference, address: 0000000000000008
RIP: amdgpu_dm_crtc_set_vblank+0x6b/0x4d0 [amdgpu]
Call Trace:
drm_vblank_enable
drm_vblank_get
drm_crtc_get_sequence_ioctl
drm_ioctl_kernel
drm_ioctl
Reproduced by running VKCTS with WSI tests enabled on RADV.
Guard the enable path on acrtc_state->stream being non-NULL, matching
the existing checks in this function.
Fixes: 34d66bc7ff10 ("drm/amd/display: Fix Xorg desktop unresponsive on Replay panel")
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The pipe_ctx->plane_res.hubp pointer is NULL on all DCE
hardware, which causes a kernel NULL pointer dereference
on all Vega and older GPUs.
Let's add a simple NULL check.
Fixes: 6bfca938471b ("drm/amd/display: Refactor DPP_SET_OUTPUT_TRANSFER_FUNC to drop pipe_ctx")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Cc: Tomasz Siemek <tomasz.siemek@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
It was regressed by a refactor. Let's fix it again.
Always set native cursor mode when the CRTC is disabled,
to make sure it doesn't cause atomic commits to fail when
they are trying to disable the CRTC.
Fixes: 87a6dab12fc0 ("drm/amd/display: add cursor module")
Cc: Alex Hung <alex.hung@amd.com>
Reviewed-by: Ivan Lipski <ivan.lipski@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Some older DCE timing generators do not implement is_tg_enabled in
their ops table. Calling it unconditionally when waiting for AV mute
frames causes a NULL pointer dereference on Southern Islands dGPUs
when turning the display off over HDMI.
Check that tg and the required ops exist before waiting for frames.
Fixes: 414da24137ac ("drm/amd/display: Add AV mute wait frames to dce110_set_avmute")
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5557
Tested-by: Viktor Jägersküpper <viktor_jaegerskuepper@freenet.de>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
amdgpu_dm_crtc_set_static_screen_optimze() maps sso_enable to the
Replay and PSR1 vsync events. allow_sr_entry is an entry gate, but the
helper currently applies it to both directions.
A non-fast update clears allow_sr_entry. During a modeset, a separate
hardware-programming event keeps self-refresh blocked while the stream
is reprogrammed. If vblank is enabled before the entry delay expires,
the ISM calls the helper with sso_enable false. The early return drops
the disable request, so the vsync events are not set.
After enough fast commits, allow_sr_entry becomes true and the
hardware-programming event can be cleared. Since the vblank reference
remains held, there is no further zero-to-one vblank transition to
restore the missing vsync events. Replay or PSR1 can then become active
while vblank is still enabled.
Gate only requests that enable static-screen optimization. Always
process disable requests so a vblank requestor keeps Replay and PSR1
blocked.
On a Phoenix system, repeated SDDM-to-VT handoffs produced stuck flips
followed by flip_done and commit-wait timeouts. The timeout was not
observed with this change applied.
Fixes: 3c108046e1d6 ("drm/amd/display: Add power module on Linux")
Assisted-by: Codex:gpt-5.6-sol
Assisted-by: Claude:opus-5
Signed-off-by: David Weber <weber.aulendorf@gmail.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The VBIOS for Cyan Skillfish devices (DCN201) indicates there is
DisplayPort ref clock spread spectrum downspread, so the audio clock
is corrected for it.
However, the clock source in this hardware does not seem to actually be
running with a clock downspread, so DisplayPort audio desyncs with video
after several minutes.
Ignore dprefclk SS downspread on CYAN_SKILLFISH2 asic.
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5429
Signed-off-by: Travis K. Bangs <tbangs89@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This version brings along the following updates:
- Add KUnit tests for crtc functions.
- Add KUnit tests for crtc functions.
- Add support for dynamic FFE levels.
- Configure all CRC engines in pipe CRC source path.
- Enable DCN6 compilation.
- Fix ABM over VABC.
- Fix CRC engine 1 enable/disable on DCN3.1.2+.
- Fix MCM blend LUT issues.
- Fix seamless mode switch not triggering for HDR to SDR transition.
- Fix wb_info leak and NULL deref in writeback.
- Increase fclk change latency on dcn351.
- Refactor stream validation.
- Resize MST HDCP per-connector arrays to 32.
- Unify force_yuv debugfs into force_yuv_pixel_format.
- Update VRR info packet to support 12-bit refresh rates.
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Combine two related color manager improvements:
1. Migrate MCM/RMCM, shaper and 3DLUT HW programming to dc_plane_cm
- Continue convergence with upstream Color Manager refactor
- Migrate MCM/RMCM, shaper and 3DLUT programming for dcn401+ to dc_plane_cm
- Unify MCM programming across both legacy and 3DLUT DMA paths
- Add 3DLUT DMA broadcast support for multi-pipe planes
2. Reprogram MCM blend LUT on blend_enable falling edge
- Fix issue where SDR desktop remained desaturated after video playback
- Detect blend_enable falling edge (1->0) in surface update detection
- Force MCM LUT reprogramming on blend state change
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Rafal Ostrowski <rafal.ostrowski@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[How & Why]
Follow-up change to set defaults for HDMI FRL training
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Relja Vojvodic <Relja.Vojvodic@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[How & Why]
- Add support for dynamic FFE levels based on debug config and link rate
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Relja Vojvodic <Relja.Vojvodic@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Description]
DCN6 needs to update BW bounding box in hw init in order to propagate
the Alt-Ch aperture info into DML. In this case update unconditionally
on dcn6 HW init.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
drmm_connector_init() and drmm_encoder_init() register their cleanup
(drm_connector_cleanup() / drm_encoder_cleanup()) as DRM-managed actions
tied to the drm_device lifetime. When the object memory is owned by
KUnit, it is freed before that action runs, so the cleanup touches freed
memory. Allocate these objects with drmm_kzalloc() so their lifetime
matches the cleanup action.
Signed-off-by: Alex Hung <alex.hung@amd.com>
Assisted-by: Copilot:Claude-Opus-4.8
Acked-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Iterate every CRC engine instance when enabling or disabling the pipe CRC
source so DCN31x OTG_CRC1_EN is handled alongside OTG_CRC_EN, matching the
legacy shared enable behavior used by DisplayCRC multi-ROI.
Reviewed-by: ChiaHsuan (Tom) Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Multi-ROI CRC uses OTG_CRC1_EN for the second engine, but the driver
only toggled OTG_CRC_EN and cleared the whole OTG_CRC_CNTL register on
disable.
[How]
Program engine 1 via OTG_CRC1_EN where supported, disable each
engine independently by crc_eng_inst, and add the missing mask on
relevant DCN ASICs.
Reviewed-by: ChiaHsuan (Tom) Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Configuring CRC engine 1 via optc35_configure_crc() triggers
ASSERT(mask != 0) in dc_helper.c when programming OTG_CRC1_SELECT.
The DCN3.2 OPTC mask list inherited from dcn32 is missing this field,
so ROI[1] CRC cannot be enabled in DisplayCRC mode on DCN3.5/3.51.
[How]
Add OTG_CRC1_SELECT to OPTC_COMMON_MASK_SH_LIST_DCN3_2, matching the
existing dcn10 definition so REG_UPDATE can program CRC engine 1.
Reviewed-by: ChiaHsuan (Tom) Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Should have been picked up in 0.1.69.0 promotion commit.
[How]
Add the missing DMUB command-header definitions in dmub_cmd.h:
1. DMUB_CMD__CACP_GET_ACE_CURVE_AREA command ID.
2. Request/response data and command structs.
3. PR runtime flag bit.
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
These registers are used, but were missing from their corresponding lists.
Reviewed-by: Ovidiu (Ovi) Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Matthew Stewart <Matthew.Stewart2@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
ABM does not take effect when brightness
is below twenty percent on VABC LCD panels.
[How]
Create new VESA aux path for brightness
translation functions. When VESA aux enabled
use zero-anchored linear interpolation to
translate instead of the legacy min max
backlight mapping.
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Signed-off-by: Iswara Nagulendran <Iswara.Nagulendran@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add dm_test_crtc_destroy_state_releases_stream to cover the cur->stream
branch of amdgpu_dm_crtc_destroy_state(), complementing the existing
no-stream test.
The test attaches a DC stream to the CRTC state and takes an extra stream
reference so the destroy path drops back to the KUnit-managed reference
instead of freeing the stream, then verifies exactly one reference was
released.
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add dm_test_crtc_enable_vblank_ips_restore_replay to cover the
pr->config.replay_supported side of the sr_supported OR in
amdgpu_dm_crtc_set_vblank().
The existing IPS restore test establishes self-refresh support via the PSR
version. This test instead marks the PSR version unsupported and sets
replay_supported, forcing the sr_supported computation to fall through to
the replay branch while still calling drm_crtc_vblank_restore().
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add dm_test_crtc_enable_vblank_ips_restore to cover the IPS/self-refresh
branch of amdgpu_dm_crtc_set_vblank() that calls drm_crtc_vblank_restore().
The test primes the DC with ips_support set and IPS not fully disabled, a
supported PSR version (self-refresh supported) and an immediate-disable
vblank config, so all four conditions gating the restore hold. A stub
get_vblank_timestamp hook is installed on the CRTC so the restore helper
passes its sanity check, and the enable path then runs to completion.
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add dm_test_crtc_enable_vblank_queues_work and
dm_test_crtc_disable_vblank_queues_work to cover the
vblank_control_workqueue branch of amdgpu_dm_crtc_set_vblank():
- The enable test installs a real workqueue, retains the stream and
queues the control worker, then drains it and checks the active vblank
IRQ count was incremented.
- The disable test drives the no-stream sub-branch (the stream-retain is
skipped) and checks the worker decremented the count.
Both seed the ISM so the queued worker takes no state-machine transition,
keeping coverage on the vblank accounting; the ISM state machine itself
is covered by the ISM tests.
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add coverage for the amdgpu_dm_crtc_set_vblank() paths reached through
amdgpu_dm_crtc_enable_vblank() and amdgpu_dm_crtc_disable_vblank():
- dm_test_crtc_enable_vblank_full_path: VRR-active enable that walks the
vupdate-irq branch and acquires the crtc/pageflip IRQ references.
- dm_test_crtc_enable_vblank_vupdate_busy: vupdate IRQ rejection aborts
the enable with -EBUSY.
- dm_test_crtc_enable_vblank_crtc_irq_error: crtc IRQ acquire failure
aborts the enable with -ENOENT.
- dm_test_crtc_enable_vblank_in_reset: an in-progress GPU reset returns
early before the vblank workqueue branch.
- dm_test_crtc_disable_vblank_vrr: the VRR disable path turns the vupdate
IRQ off and releases both IRQ references.
Add shared IRQ-source stubs and setup helpers so amdgpu_irq_get()/put()
succeed without hardware access.
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
fclk change latency is longer than expected on dcn351.
[How]
Increate fclk change latency from 24us to 32us.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Sung-huai Wang <Danny.Wang@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
The connector exposed a single force_yuv420_output boolean debugfs and
carried force_yuv420_output / force_yuv422_output boolean fields to force a
chroma encoding. This cannot express "force RGB" or "force YCbCr444", and
diverges from the upstream amdgpu_dm which uses a single
force_yuv_pixel_format field keyed on enum dc_pixel_encoding.
[How]
- Replace the two boolean fields with a single uint8_t
force_yuv_pixel_format holding an enum dc_pixel_encoding value
(PIXEL_ENCODING_UNDEFINED == no override).
- Replace the force_yuv420_output boolean debugfs with a read/write
force_yuv_pixel_format file that takes the encoding directly
(1=RGB, 2=YCbCr422, 3=YCbCr444, 4=YCbCr420), validated against
PIXEL_ENCODING_COUNT.
- Convert the existing readers/writers in amdgpu_dm_connector.c to the
new field, preserving current behaviour.
- Add YCbCr444 force support now that the field can express it.
v2: Merge with changed from drm-misc (Alex)
Assisted-by: Copilot:claude-opus-4.8
Reviewed-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
amdgpu_dm_create_validate_stream_for_sink() drove its RGB -> YUV422 ->
YUV420 chroma fallback by recursing and toggling the shared
aconnector->force_yuv420_output / force_yuv422_output fields, resetting
them after each recursive call. Those fields have no locking and the
function runs concurrently on the same connector from two paths: the
connector probe worker (->mode_valid) and a compositor's atomic check
(dm_update_crtc_state). When both run at once, one thread can clear the
override just before the other tests its exit condition, so the exit is
missed and validation loops indefinitely, hanging the modeset path.
[How]
- Replace the recursion with an explicit loop over the chroma encodings
wrapping the existing bpc walk.
- Carry the encoding/bpc selection on the stack, passed by value into
create_stream_for_sink() / fill_stream_properties_from_drm_display_mode(),
instead of mutating shared connector state.
- Derive the supported encodings and bit depths into bitmaps and drive
validation from them, gating each candidate on the sink's advertised
capability so unsupported encodings are never retried.
- Move encoding selection entirely to the caller and pass the chosen
dc_pixel_encoding into fill_stream_properties_from_drm_display_mode().
v2: sqaush in KUnit test fixes, merge with drm-misc changes (Alex)
Assisted-by: Copilot:claude-opus-4.8
Reviewed-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add dm_test_crtc_set_static_screen_optimze_sr_entry_psr and
dm_test_crtc_set_static_screen_optimze_psr_su_skips to cover the
allow_sr_entry == true path of amdgpu_dm_crtc_set_static_screen_optimze():
the replay/PSR event updates when psr_version < DC_PSR_VERSION_SU_1, and
skipping the PSR event update when psr_version is DC_PSR_VERSION_SU_1.
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add dm_test_crtc_set_vupdate_irq_dc_busy and
dm_test_crtc_set_vupdate_irq_enable to cover the previously untested
paths in amdgpu_dm_crtc_set_vupdate_irq() where an OTG instance is
assigned: dc_interrupt_set() failing (returns -EBUSY) and succeeding
via a mock IRQ service (returns 0 for enable and disable).
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add dm_test_crtc_handle_vblank_completes_cursor_only to cover the
previously untested branch in amdgpu_dm_crtc_handle_vblank() where a
pending event with pflip_status != AMDGPU_FLIP_SUBMITTED (a cursor-only
commit) is signalled: the vblank event is sent, the vblank reference is
dropped, and acrtc->event is cleared.
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Expose amdgpu_dm_crtc_count_crtc_active_planes() for KUnit and add tests
covering the empty plane list and the mixed case exercising the mask
filter, cursor skip, missing plane state, and framebuffer presence
branches.
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Expose amdgpu_dm_idle_worker() for KUnit and add tests covering the
disabled exit, both loop break paths, and the enable-body path. Add
dm_kunit_alloc_dc_state() and dm_kunit_alloc_clk_mgr() helpers to
support the new tests.
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add KUnit coverage for the CRTC vblank paths:
- amdgpu_dm_crtc_handle_vblank: no-event completion and the
AMDGPU_FLIP_SUBMITTED guard that keeps a pending event pending.
- amdgpu_dm_crtc_vblank_control_worker: enable increments, disable
decrements, and disable clamps the active vblank IRQ count at zero.
- amdgpu_dm_crtc_disable_vblank: disable path returns cleanly when the
IRQ subsystem is not installed.
Expose amdgpu_dm_crtc_vblank_control_worker for KUnit via
STATIC_IFN_KUNIT/EXPORT_IF_KUNIT and declare it in the header.
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Expand KUnit coverage for amdgpu_dm_crtc.c with tests for functions that
are easy to exercise in isolation:
- amdgpu_dm_crtc_set_static_screen_optimze(): the !allow_sr_entry early
return.
- amdgpu_dm_crtc_enable_vblank(): rejection with -EINVAL when enabling
vblank on an unconfigured CRTC.
- amdgpu_dm_crtc_update_crtc_active_planes(): the no-stream branch that
resets active_planes to zero.
- amdgpu_dm_crtc_duplicate_state(): DM-specific fields are carried over.
- amdgpu_dm_crtc_reset_state(): a fresh state is allocated and installed.
- amdgpu_dm_crtc_destroy_state(): a stream-less state is freed cleanly.
Expose amdgpu_dm_crtc_destroy_state(), amdgpu_dm_crtc_duplicate_state(),
amdgpu_dm_crtc_reset_state() and amdgpu_dm_crtc_update_crtc_active_planes()
to the tests via STATIC_IFN_KUNIT/EXPORT_IF_KUNIT.
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
The seamless mode switch was not getting triggered during HDR to SDR
transitions, and no DPCD write was observed. Root cause analysis
revealed that incorrect panel capabilities were being reported for PSR
SU panels. Due to the wrong capabilities, the OS was not invoking the
seamless mode switch API, resulting in no DPCD communication and also
gated eDP teardown across the seamless mode switch hold.
[How]
Fixed by setting the correct power panel capabilities for PSR SU panels.
This ensures the OS receives accurate panel capability information and
triggers the seamless mode switch API as expected, restoring proper
DPCD writes during HDR to SDR transitions.
The DC commit sequence was tearing the eDP down anyway -- backlight off,
ABM disable, DPMS off, PSR/Replay enable state cleared, PHY TX off,
OTG/OPTC off; all these actions are blocked now with the
skip_implict_edp_power_control
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Karthi Kandasamy <karthi.kandasamy@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHAT]
dc_stream_add_writeback() copies wb_info by value, so free it on all
paths via a single cleanup label. Also bail out early when no pipe_ctx
matches the stream to avoid a NULL pointer dereference.
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
hdmi_frl_status_polling_work() skipped any link whose connector_signal
was not SIGNAL_TYPE_HDMI_FRL. connector_signal is not reliably set to
SIGNAL_TYPE_HDMI_FRL while a link is actually running FRL, so links that
were operating in FRL mode were skipped and their status flags never got
polled, missing link-retrain events.
[How]
Use frl_link_settings.frl_link_rate to decide whether a link is running
FRL. A non-zero rate means FRL is active, so only links with a zero rate
are skipped. This ensures every link actually operating in FRL mode is
polled for status changes.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
VRR info packet previously only supported up to 10-bit refresh rate values
limiting the range of FreeSync minimum and maximum refresh rates that
could be encoded.
[How]
Expanded the bit masking in PB11/PB12 from 2 to 4 bits to capture bits
11:8 of the minimum and maximum FreeSync refresh rates, enabling the VRR
info packet to encode 12-bit refresh rate values.
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Signed-off-by: Harry VanZyllDeJong <hvanzyll@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
ensure dtbclk is enabled before hdmistreamclk_en
pmfw could stop dtbclk on idle.
driver needs to ensure dtbclk enabled is enabled before hdmistreamclk_en
also disable debounce timer on dcn42.
Reviewed-by: Chris Park <chris.park@amd.com>
Reviewed-by: Leo Chen <leo.chen@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
dm_dp_mst_get_modes() uses drm_connector->index to index the
per-connector HDCP arrays in struct hdcp_workqueue. Those arrays are
sized to AMDGPU_DM_MAX_DISPLAY_COUNT, which matches the DRM connector
index range (0..31). Add a defensive bounds check so that, should the
DRM connector index range ever grow beyond the array size, the access
is skipped instead of reading and writing out of bounds.
Assisted-by: Copilot:claude-opus-4.8
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
AMDGPU_DM_MAX_DISPLAY_INDEX is 31. It suggest a maximum number of
32 connectors. But the way it's used is like MAX_DISPLAY_COUNT.
Hence we're off by one with DRM core, which supports a max of 32
connectors.
Rename AMDGPU_DM_MAX_DISPLAY_INDEX to AMDGPU_DM_MAX_DISPLAY_COUNT
to match its actual use, and increase the size to 32 to match the
originally intended size.
Fixes: 82986fd631fa ("drm/amd/display: save restore hdcp state when display is unplugged from mst hub")
Assisted-by: Copilot:claude-opus-4.8
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The duplicate amdgpu_dm_plane_test.o entry causes linker errors
during the arm-64 build.
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
- Add hooks in various entry points to perform hw/sw init for DCN6 asic
- Add dependent changes needed to enable DCN6 asic
- Update the Makefiles so that DCN6 related newly added sources are compiled
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add DCN6 code to DC, DML2, and DMUB
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
We need to exit PSR/IPS before programming. Before calling DC for
programming in amdgpu_dm_commit_planes(), there's a
vblank_control_workqueue flush. This waits for IPS and PSR exit. (See
drm_vblank_on/off() > amdgpu_dm_crtc_set_vblank() --queue_work()->
amdgpu_dm_crtc_vblank_control_worker())
Prior to the tagged "Fixes:" change, drm_vblank_get() was called before
the workqueue flush. This ordering ensures that PSR exit occurred before
programming. After the "Fixes:" change, drm_vblank_get() is called after
the workqueue flush, leading to programming while idle optimizations are
still active. This can lead to incorrect flip_pending detection used by
vblank event delivery.
[How]
Split the vblank_get() component of `dm_arm_vblank_event()` into
`dm_arm_vblank_event_pre_programming()`, which is called before
programming. Call it before the vblank_control_workqueue flush.
Includes a drive-by cleanup of prepare_flip_isr(): the only caller is
dm_arm_vblank_event() and it's simple enough to roll-in.
v2: Fix checkpatch formatting warning on
drm_arm_vblank_event_pre_programming() arg alignment.
Fixes: f64a9be56536 ("drm/amd/display: check GRPH_FLIP status before sending event")
Link: https://gitlab.freedesktop.org/drm/amd/-/work_items/4141#note_3583205
Link: https://gitlab.freedesktop.org/drm/amd/-/work_items/5527
Assisted-by: Codex:gpt-5.6-sol
Assisted-by: Claude:opus-5
Suggested-by: David Weber <weber.aulendorf@gmail.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The same as the rest of the code, get_ss_info_from_atombios() uses
calc_pll_cs->ctx->logger for logging. But calc_pll_cs->ctx is
initialized only later in calc_pll_max_vco_construct(). Therefore, any
output using DC_LOG_SYNC() leads to a NULL pointer deference in
get_ss_info_from_atombios().
According to Sashiko, the very same problem exists in
dce112_get_pix_clk_dividers() and dcn3_get_pix_clk_dividers() too.
To avoid accessing the NULL context, use clk_src->base.ctx->logger
everywhere. That context in base is initialized earlier in
dce110_clk_src_construct() and dce112_clk_src_construct(). Before
get_ss_info_from_atombios() or Sashiko's get_pix_clk_dividers functions
above are actually called. This is done by redefining DC_LOGGER to
CTX->logger.
Before:
dce110_clk_src_construct() did:
-> sets clk_src->base.ctx = ctx;
-> ss_info_from_atombios_create()
-> get_ss_info_from_atombios() <- uses calc_pll_cs->ctx # BOOM
-> calc_pll_max_vco_construct() <- sets calc_pll_cs->ctx
After:
dce110_clk_src_construct() does:
-> sets clk_src->base.ctx = ctx;
-> ss_info_from_atombios_create()
-> get_ss_info_from_atombios() <- uses clk_src->base.ctx
Closes: https://bugzilla.suse.com/show_bug.cgi?id=1271175
Closes: https://lore.kernel.org/all/a9ee54e6-2413-4156-9bde-d528ae3c63a3@kernel.org/
Fixes: 1296423bf23c ("drm/amd/display: define DC_LOGGER for logger")
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Lakha, Bhawanpreet <Bhawanpreet.Lakha@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Rodrigo Siqueira <siqueira@igalia.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
By anchoring the search to the DML top-level Makefile directory,
FPU CFLAGS are now correctly applied to all relevant source files.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
Mikhail Gavrilov
Nathan Lucas
Ivan Lipski
Samuel Pitoiset
Timur Kristóf
Ray Wu
David Weber
Travis K. Bangs
Taimur Hassan
Rafal Ostrowski
Relja Vojvodic
Alvin Lee
Alex Hung
Wayne Lin
Matthew Stewart
Iswara Nagulendran
Bhawanpreet Lakha
Sung-huai Wang
Karthi Kandasamy
Fangzhi Zuo
Harry VanZyllDeJong
Charlene Liu
Harry Wentland
Roman Li
Aurabindo Pillai
Leo Li
Jiri Slaby (SUSE)
Prike Liang