| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Linux 7.2
There was a lot of conflicts this round between fixes and next,
and I'd like to get the merge resolutions that we have in drm-tip.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Smatch complains that:
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu15/smu_v15_0_8_ppt.c:1964
smu_v15_0_8_set_performance_level() error: uninitialized symbol 'ret'.
In this line there is an "if (ret)" condition where "ret" is either
zero or uninitialized. Initialize "ret" at the start of the function to
avoid a potential uninitialized variable bug. But also delete the
condition since it is never true.
Fixes: 422b399b09c7 ("drm/amd/pm: Add od_edit_dpm_table support")
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add clockgating and powergating flags for GC 11.5.6
and allow/disallow GFXOFF for SMU 15.0.5
Signed-off-by: Shubhankar Milind Sardeshpande <Shubhankar.MilindSardeshpande@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The Q10 temperatures were rounded to whole degrees before being scaled
to millidegrees, losing sub-degree precision. Convert them while
preserving the fractional part.
Also, use the standard MILLIDEGREE_PER_DEGREE to represent
SMU_TEMPERATURE_UNITS_PER_CENTIGRADES.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The Q10 socket power was rounded to whole watts before scaling to
milliwatts, so the reported value lost its sub-watt precision. Add
SMUQ10_TO_MILLIWATT to convert while keeping the fractional bits.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Convert SoC power directly from milliwatts using MILLIWATT_PER_WATT and
remove redundant variables.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Replace the simple exact-match loop in emit_clk_levels with a call
to smu_v14_0_0_find_clk_level() introduced in patch 1. The helper
already handles both exact and closest-match semantics.
Build a stack-local frequency table from the DPM levels (using
reverse index for SMU_MCLK since MemPstateTable stores levels
high-to-low), then call the helper once to find the active level.
The SMU reports time-filtered average frequencies that often do not
match any DPM table entry exactly. Without closest-match fallback,
MCLK, FCLK and other clocks show DPM levels but never display the
* marker, breaking userspace tools that rely on it to identify the
active frequency.
Signed-off-by: Priya Hosur <Priya.Hosur@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add SMU_DCEFCLK case to smu_v14_0_1_get_dpm_freq_by_index and
smu_v14_0_0_get_dpm_freq_by_index using DcfClocks[] with
NumDcfClkLevelsEnabled bounds check. Add matching case in both
get_dpm_level_count functions.
Add SMU_DCEFCLK case in emit_clk_levels to list DCEF DPM levels.
No * marker is emitted since SmuMetrics_t has no DcfclkFrequency
field (same firmware limitation as Phoenix).
Without this, pp_dpm_dcefclk reports N/A on Strix Halo.
Signed-off-by: Priya Hosur <Priya.Hosur@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add IP_VERSION(11,5,1) to pp_dpm_vclk and pp_dpm_dclk visibility
whitelists so these sysfs entries are exposed on Strix Halo (GC
11.5.1). Add IP_VERSION(11,5,1) to pp_dpm_vclk1 and pp_dpm_dclk1
whitelists with the existing num_vcn_inst >= 2 guard since Strix
Halo has two VCN instances.
Without this, amd-smi reports N/A for VCLK0, VCLK1, DCLK0 and
DCLK1 clocks.
Signed-off-by: Priya Hosur <Priya.Hosur@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
SmuMetrics_t has no DclkFrequency field but DCLK and VCLK have
separate DPM clock tables with different frequencies at each level.
Introduce smu_v14_0_0_find_clk_level(), a shared helper that
finds the closest DPM level for a given target frequency in a
frequency array.
For METRICS_AVERAGE_DCLK, use the helper to find the DPM level
whose VCLK frequency matches the reported VclkFrequency and
return the DCLK frequency at that same level index, since both
clocks share the same level count (VcnClkLevelsEnabled /
Vcn0ClkLevelsEnabled).
The original code returned 0 for METRICS_AVERAGE_DCLK, which broke
the active-level marker in pp_dpm_dclk entirely.
Signed-off-by: Priya Hosur <Priya.Hosur@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
GPU reset reinitializes PMFW and reloads the platform power table. The
saved user policy remains valid, but suspend-only restore does not run
because adev->in_suspend is clear.
Restore the active PPT policy from SMU late initialization while the
device is in reset recovery. Route each value through the common range
validation and ASIC setter before updating PMFW.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The existing user policy representation has three ambiguities:
- A numeric value cannot distinguish explicit zero from an unset policy.
- One value per controller cannot preserve independent AC and DC requests.
- Suspend-only restore misses runtime resume, GPU reset, and table reload.
Refactor policy storage and restore as follows:
- Store values and validity masks by power source and PPT controller.
- Save writes against the active source.
- Restore the active source after default SMU setup.
- Reapply the target policy after live AC/DC transitions.
- Use the target source default when no explicit request exists.
The late-init path now covers system resume, runtime resume, GPU reset,
and custom PPTable reload. Common code owns persistent policy; PMFW
continues to own effective current limits.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
SMU 13.0.0, SMU 13.0.7, and SMU 14.0.2 represent limits above the
message limit as a base value plus an overdrive percentage. GetPptLimit
returns only the base, which causes two incorrect results:
- hwmon reports the message limit instead of the effective limit.
- Lowering the cap can leave the previous OD percentage active.
Export the active overdrive table from PMFW and combine its PPT
percentage with the message result. Use the exported percentage to clear
OD state before programming a limit within the message range.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The scalar PPT model has several structural limitations:
- Controller identity, power source, capability, and PMFW state share
the same fields.
- Combined callbacks cannot address PPT0 and PPT1 independently.
- Cached current limits can become stale after PMFW reset.
Refactor the model around these rules:
- Index ranges by AC/DC source and PPT0/PPT1 controller.
- Store normal and overdrive capabilities separately.
- Pass the controller to get and set callbacks.
- Keep slow and fast names as semantic aliases.
Assign each value to a single owner:
- PPTable or platform initialization supplies constant capabilities.
- PMFW supplies runtime state.
- Common code selects the active source and overdrive range.
Van Gogh defaults are initialized once, while firmware without PPT query
support remains usable. Capable SMU 13.0.6 and SMU 15.0.8 platforms
expose PPT1 through the same interface. A writable controller must also
provide a setter callback.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
GetPptLimit reports mutable PMFW runtime state. Using that value for
static capabilities causes two externally visible problems:
- A userspace override changes the default reported through hwmon.
- A firmware reset changes the advertised minimum or maximum range.
Derive platform defaults and supported ranges from the driver PPTable
for Sienna Cichlid, Navi10, Arcturus, and Aldebaran. Reserve PMFW queries
for the effective current limit.
Runtime policy can no longer redefine immutable platform capabilities.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Replace the legacy SMU table-copy metrics path with a DRAM-mapped,
accumulator-based approach for SMU v15.0.0, using a ping-pong buffer
to compute averaged metrics from deltas between consecutive samples.
- Add GetMetricsTableVersion, GetMetricsTableLogSample and
GetMetricsTableLogDramAddr messages and their MSG_MAP entries.
- Introduce SMU_15_0_0_MetricsInfo_t holding two MetricsTable_t
buffers, the mapped DRAM address, table size and pre-computed
avg_metric[] values.
- Resolve and ioremap_wc() the firmware log DRAM address once in
init_smc_tables(); iounmap() it in fini_smc_tables().
- Fetch samples into the inactive buffer, compute averaged clocks,
activity, power and temperature via wrapping_sub() accumulator
deltas, then swap the active index.
- Rename the old get_metrics_table() to get_gpu_metrics_table() for
the gpu_metrics v3.0 export path.
- Smartshift sensor reporting is dropped
Co-developed-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Signed-off-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Co-developed-by: Suresh Guttula <Suresh.Guttula@amd.com>
Signed-off-by: Suresh Guttula <Suresh.Guttula@amd.com>
Co-developed-by: Kanala Ramalingeswara Reddy <Kanala.RamalingeswaraReddy@amd.com>
Signed-off-by: Kanala Ramalingeswara Reddy <Kanala.RamalingeswaraReddy@amd.com>
Signed-off-by: Shubhankar Milind Sardeshpande <Shubhankar.MilindSardeshpande@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add smu_v15_0_0_metrics.h defining the v0x04 metrics table structures
(MetricsTable_IOD_t, MetricsTable_CCX_t, MetricsTable_t) exported by
SMU firmware. These structures describe voltage, power, thermal,
frequency, bandwidth, activity, and overclock telemetry fields used
for PM reporting on SMU v15.0.0 APUs.
Signed-off-by: Shubhankar Milind Sardeshpande <Shubhankar.MilindSardeshpande@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
APUs use firmware-owned DPM tables and do not support replacement through
pp_table. Generic callbacks can nevertheless expose the sysfs file and
accept an upload before resetting the power management stack.
Treat pp_table as unsupported on APUs. Use the same platform check in the
get and set paths to hide the file and reject uploads.
Fixes: 289921b03fe5 ("drm/amd/powerplay: implement sysfs of pp_table for smu11 (v2)")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 74f28db2db69777cd2f059d50fe34e365ddd5add)
Cc: stable@vger.kernel.org
|
|
APUs use firmware-owned DPM tables and do not support replacement through
pp_table. Generic callbacks can nevertheless expose the sysfs file and
accept an upload before resetting the power management stack.
Treat pp_table as unsupported on APUs. Use the same platform check in the
get and set paths to hide the file and reject uploads.
Fixes: 289921b03fe5 ("drm/amd/powerplay: implement sysfs of pp_table for smu11 (v2)")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
GPU average and input power backends report a mix of whole watts,
milliwatts, Q24.8 watts and decimal-packed fractions. Q24.8 is inherited
from the legacy PowerPlay sensor format. Milliwatts are a more natural unit
for the hwmon and pm_info consumers in amdgpu_pm.c. A common decoder cannot
distinguish these formats, and converting native milliwatts through Q24.8
also loses precision.
Use milliwatts as the internal unit across all PPT and PowerPlay backends.
Decode Q24.8 only at the legacy smu7 input boundary and encode it only for
the raw amdgpu_sensors debugfs interface. This gives hwmon, pm_info and the
sensor ioctl one unambiguous unit while preserving the format used by UMR.
Fixes: 5b79d0482f3c ("drm/amd/pp: Remove struct pp_gpu_power")
Fixes: 01992b121fb6 ("drm/amd/pm: fix amdgpu_pm_info power display units")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Reported-by: Lars Nieradzik <l.nieradzik@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 757ba0790bafec47a507e9662bf380f2e027d420)
Cc: stable@vger.kernel.org
|
|
amdgpu_dpm_get_gpu_metrics() returns a pointer to the shared metrics cache
after dropping adev->pm.mutex. The sysfs path then copies from that pointer.
Another reader can refresh the cache in place during the copy and return a
snapshot containing data from two generations.
Pass caller-provided storage through the DPM interface and copy the metrics
while the mutex is held. This keeps the cache pointer private and makes each
sysfs read observe one complete sample.
Fixes: 25c933b1c4fc ("drm/amd/powerplay: add new sysfs interface for retrieving gpu metrics(V2)")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 862333bb48693ecafcae25af0c9d9ec31015ac77)
Cc: stable@vger.kernel.org
|
|
amdgpu_dpm_get_pp_table() returns a pointer to a driver-owned power table
after dropping adev->pm.mutex. The sysfs path then copies from that pointer.
A concurrent pp_table write can replace and free the allocation during the
copy, causing a use-after-free.
Change the DPM interface to copy into caller-provided storage while the mutex
is held. Keep the size-only query for attribute discovery without exposing
the driver-owned pointer.
Fixes: 1684d3ba4885 ("drm/amd/amdgpu: change pptable output format from ASCII to binary")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f6eed7acfd30099ef7baeb6ba45bb59daad80631)
Cc: stable@vger.kernel.org
|
|
Update smu v15.0.0 driver if header to be v15.0.5 compatible.
Signed-off-by: Kanala Ramalingeswara Reddy <Kanala.RamalingeswaraReddy@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3ee6561f8ae0ae3c80d04429361a6e06589693fc)
|
|
Updates PPSMC_MSGs and set/get functions for gathering GFXOFF logs
on Van Gogh. Logs are now gathered live rather than starting then
stopping logging and reading an average value afterwards. This is
in accordance to changes made in PMFW.
In regards to messageID 0x52, the old interface uses a start/stop
parameter, and the new one doesn't. The firmware is checked to
determine which method to use.
v2: added firmware guard to new interface, old interface kept as
fallback
Signed-off-by: Fares Soliman <Fares.Soliman@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 482e2cadea8c34ae4e733f269a640d6b04fc9262)
|
|
GPU average and input power backends report a mix of whole watts,
milliwatts, Q24.8 watts and decimal-packed fractions. Q24.8 is inherited
from the legacy PowerPlay sensor format. Milliwatts are a more natural unit
for the hwmon and pm_info consumers in amdgpu_pm.c. A common decoder cannot
distinguish these formats, and converting native milliwatts through Q24.8
also loses precision.
Use milliwatts as the internal unit across all PPT and PowerPlay backends.
Decode Q24.8 only at the legacy smu7 input boundary and encode it only for
the raw amdgpu_sensors debugfs interface. This gives hwmon, pm_info and the
sensor ioctl one unambiguous unit while preserving the format used by UMR.
Fixes: 5b79d0482f3c ("drm/amd/pp: Remove struct pp_gpu_power")
Fixes: 01992b121fb6 ("drm/amd/pm: fix amdgpu_pm_info power display units")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Reported-by: Lars Nieradzik <l.nieradzik@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
amdgpu_dpm_get_gpu_metrics() returns a pointer to the shared metrics cache
after dropping adev->pm.mutex. The sysfs path then copies from that pointer.
Another reader can refresh the cache in place during the copy and return a
snapshot containing data from two generations.
Pass caller-provided storage through the DPM interface and copy the metrics
while the mutex is held. This keeps the cache pointer private and makes each
sysfs read observe one complete sample.
Fixes: 25c933b1c4fc ("drm/amd/powerplay: add new sysfs interface for retrieving gpu metrics(V2)")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
amdgpu_dpm_get_pp_table() returns a pointer to a driver-owned power table
after dropping adev->pm.mutex. The sysfs path then copies from that pointer.
A concurrent pp_table write can replace and free the allocation during the
copy, causing a use-after-free.
Change the DPM interface to copy into caller-provided storage while the mutex
is held. Keep the size-only query for attribute discovery without exposing
the driver-owned pointer.
Fixes: 1684d3ba4885 ("drm/amd/amdgpu: change pptable output format from ASCII to binary")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update smu v15.0.0 driver if header to be v15.0.5 compatible.
Signed-off-by: Kanala Ramalingeswara Reddy <Kanala.RamalingeswaraReddy@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Updates PPSMC_MSGs and set/get functions for gathering GFXOFF logs
on Van Gogh. Logs are now gathered live rather than starting then
stopping logging and reading an average value afterwards. This is
in accordance to changes made in PMFW.
In regards to messageID 0x52, the old interface uses a start/stop
parameter, and the new one doesn't. The firmware is checked to
determine which method to use.
v2: added firmware guard to new interface, old interface kept as
fallback
Signed-off-by: Fares Soliman <Fares.Soliman@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Some AMD APU multi-function devices expose an integrated USB xHCI
controller. In some circumstances (such as larger VRAM), the PM core
can resume can fail when the xHCI controller is resuming in parallel
with the GPU/display function.
On affected systems, the xHCI controller can complete pci_pm_resume
and start resuming USB devices while the GPU is still in its much
longer resume path. This race condition leads to USB device resume
failures followed by:
xhci_hcd ...: xHCI host not responding to stop endpoint command
xhci_hcd ...: HC died; cleaning up
Create a device link from any xHCI controller sharing the same PCIe
root port as the APU display function. The link uses DL_FLAG_STATELESS
and DL_FLAG_PM_RUNTIME to ensure the GPU completes its resume before
the xHCI controller begins resuming USB devices.
This device link is done specifically in amdgpu so that if the
platform firmware has been modified such that this issue doesn't happen
the version can be detected and the workaround skipped.
Suggested-by: Aaron Ma <aaron.ma@canonical.com>
Reported-by: mrh@frame.work
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221073
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Alexander F <superveridical@gmail.com>
Tested-by: Francis DB <francisdb@gmail.com>
Link: https://patch.msgid.link/20260713195313.1739762-1-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 07c93d7eeb0d990bc1b8e3b1eafa464bc9feee97)
Cc: stable@vger.kernel.org
|
|
There were two mistakes in the previous implementation:
The check for AutomaticDCTransition should be inverted.
We recently learned that the kernel should send
PPSMC_MSG_RunningOnAC when the flag is set, and not the
other way around.
The clocks also need to be recomputed, because the code in
the smu7_apply_state_adjust_rules() function selects
different limits on AC and DC.
Fixes: 96da0d86614e ("drm/amd/pm/smu7: Notify SMU7 of DC->AC switch")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 516f8fc30a1b56af03f39e93c18707d13419fb1f)
Cc: stable@vger.kernel.org
|
|
There were two mistakes in the previous implementation:
The check for ATOM_PP_PLATFORM_CAP_HARDWAREDC should be
inverted. We recently learned that the kernel should send
PPSMC_MSG_RunningOnAC when the flag is set, and not the
other way around.
The clocks also need to be recomputed, because the code in
the si_apply_state_adjust_rules() function selects different
limits on AC and DC.
Fixes: 2d071f6457af ("drm/amd/pm/si: Notify the SMC when switching to AC")
Tested-by: Jeremy Klarenbeek <jeremy.klarenbeek99@gmail.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 358dd0a9ce66d898fa934887385327547d599d88)
Cc: stable@vger.kernel.org
|
|
When DPM is turned off with the amdgpu.dpm=0 module parameter,
the thermal work queue isn't initialized so we shouldn't
schedule any work on it.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit bd018d36171a695952c6d391471c279c9e05c8b2)
|
|
The old radeon driver has a documented workaround in ci_dpm.c
which claims that Bonaire 0x6658 with old memory controller
firmware is unstable with MCLK DPM, so as a precaution I
disabled MCLK DPM on this ASIC in amdgpu.
Note that the old MC firmware is not actually used with
amdgpu, but in theory it's possible that the VBIOS sets
up the ASIC with an old MC firmware that is already running
when amdgpu initializes (in which case amdgpu doesn't
load its own firmware).
What I expected to happen is that the GPU would simply use
its maximum memory clock, and indeed this is what seemed
to happen according to amdgpu_pm_info which reads the
current MCLK value from the SMU.
However, some users reported a huge perf regression
and upon a closer look it seems that the GPU seems to
not actually use the highest MCLK value, despite the SMU
reporting that it does.
Let's not disable MCLK DPM on Bonaire 0x6658 (R7 260X).
Keep MCLK DPM disabled on R9 M380 in the 2015 iMac
because that still hangs if we enable it.
Fixes: 9851f29cb06c ("drm/amd/pm/ci: Disable MCLK DPM on problematic CI ASICs")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d34acad064ee7d82bd18f5d87592c422d4d323ac)
Cc: stable@vger.kernel.org
|
|
Some AMD APU multi-function devices expose an integrated USB xHCI
controller. In some circumstances (such as larger VRAM), the PM core
can resume can fail when the xHCI controller is resuming in parallel
with the GPU/display function.
On affected systems, the xHCI controller can complete pci_pm_resume
and start resuming USB devices while the GPU is still in its much
longer resume path. This race condition leads to USB device resume
failures followed by:
xhci_hcd ...: xHCI host not responding to stop endpoint command
xhci_hcd ...: HC died; cleaning up
Create a device link from any xHCI controller sharing the same PCIe
root port as the APU display function. The link uses DL_FLAG_STATELESS
and DL_FLAG_PM_RUNTIME to ensure the GPU completes its resume before
the xHCI controller begins resuming USB devices.
This device link is done specifically in amdgpu so that if the
platform firmware has been modified such that this issue doesn't happen
the version can be detected and the workaround skipped.
Suggested-by: Aaron Ma <aaron.ma@canonical.com>
Reported-by: mrh@frame.work
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221073
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Alexander F <superveridical@gmail.com>
Tested-by: Francis DB <francisdb@gmail.com>
Link: https://patch.msgid.link/20260713195313.1739762-1-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Reviewed-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Make the lines greppable by removing an extra EOL and report the
status only once - after the reply is detected.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Reviewed-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
There were two mistakes in the previous implementation:
The check for AutomaticDCTransition should be inverted.
We recently learned that the kernel should send
PPSMC_MSG_RunningOnAC when the flag is set, and not the
other way around.
The clocks also need to be recomputed, because the code in
the smu7_apply_state_adjust_rules() function selects
different limits on AC and DC.
Fixes: 96da0d86614e ("drm/amd/pm/smu7: Notify SMU7 of DC->AC switch")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Commit 055a40c32f3a ("drm/amd/pm: Use uploaded size for legacy custom
PPTable") changed pp_dpm_set_pp_table() to kmemdup the uploaded buffer
directly and set soft_pp_table_size to the uploaded size. As a result
soft_pp_table now points to an allocation completely outside adev->bios,
making the pp_end > bios_end check in pp_entries_max() likely true for
custom PP tables — returning 0 and breaking PP table overrides via sysfs.
Fixes: c42871ba4833 ("drm/amdgpu/pm: add pp_entries_max() helper")
Reported-by: John Olender <john.olender@gmail.com>
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Tested-by: John Olender <john.olender@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Widen pcie_bandwidth_inst from U32 to U64 to be consistent with
the smu_v13_0_6 definition.
v2: Remove percent conversion (Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update two cases in the smu_v13_0_6 GPU metrics accumulated
counter field definition
Widen the following fields from U32 to U64 to prevent counter
wrap-around and match smu_v15_0_8 field sizes:
- prochot_residency_acc
- ppt_residency_acc
- socket_thm_residency_acc
- vr_thm_residency_acc
- hbm_thm_residency_acc
- gfx_activity_acc
- mem_activity_acc
- pcie_nak_sent_count_acc
- pcie_nak_rcvd_count_acc
- pcie_lc_perf_other_end_recovery
Correct the unit annotation from PERCENT to NONE for accumulated
counter fields which are dimensionless hardware counters and carry
no inherent unit:
- gfx_activity_acc
- mem_activity_acc
- pcie_bandwidth_acc
- gfx_busy_acc
v2: remove percent unit (Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add jpeg_busy and vcn_busy population to smu_v15_0_8 gpu metrics
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
There were two mistakes in the previous implementation:
The check for ATOM_PP_PLATFORM_CAP_HARDWAREDC should be
inverted. We recently learned that the kernel should send
PPSMC_MSG_RunningOnAC when the flag is set, and not the
other way around.
The clocks also need to be recomputed, because the code in
the si_apply_state_adjust_rules() function selects different
limits on AC and DC.
Fixes: 2d071f6457af ("drm/amd/pm/si: Notify the SMC when switching to AC")
Tested-by: Jeremy Klarenbeek <jeremy.klarenbeek99@gmail.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When DPM is turned off with the amdgpu.dpm=0 module parameter,
the thermal work queue isn't initialized so we shouldn't
schedule any work on it.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The old radeon driver has a documented workaround in ci_dpm.c
which claims that Bonaire 0x6658 with old memory controller
firmware is unstable with MCLK DPM, so as a precaution I
disabled MCLK DPM on this ASIC in amdgpu.
Note that the old MC firmware is not actually used with
amdgpu, but in theory it's possible that the VBIOS sets
up the ASIC with an old MC firmware that is already running
when amdgpu initializes (in which case amdgpu doesn't
load its own firmware).
What I expected to happen is that the GPU would simply use
its maximum memory clock, and indeed this is what seemed
to happen according to amdgpu_pm_info which reads the
current MCLK value from the SMU.
However, some users reported a huge perf regression
and upon a closer look it seems that the GPU seems to
not actually use the highest MCLK value, despite the SMU
reporting that it does.
Let's not disable MCLK DPM on Bonaire 0x6658 (R7 260X).
Keep MCLK DPM disabled on R9 M380 in the 2015 iMac
because that still hangs if we enable it.
Fixes: 9851f29cb06c ("drm/amd/pm/ci: Disable MCLK DPM on problematic CI ASICs")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
SMU14 derives the default PPT limit from SocketPowerLimitAc/Dc, but
MsgLimits.Power may expose a different firmware limit for the same PPT0
throttler. Using those values independently as fixed min/max bases can
report an incorrect configurable power range.
Keep the socket power limit as the default value and as the fallback for
current-limit queries. Calculate the reported range from both firmware
values instead, using the lower value as the minimum base and the higher
value as the maximum base before applying OD percentages.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit c936b8126b444401318fcbeb1828488cc5312dee)
Cc: stable@vger.kernel.org
|
|
Initialize SMU Version 15_0_9
Signed-off-by: Kanala Ramalingeswara Reddy <Kanala.RamalingeswaraReddy@amd.com>
Signed-off-by: Granthali Vinodkumar Dhandar <granthali.vinodkumardhandar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1dfd4e84b5beec353a81d61af9eaf4e5a56e0c57)
|
|
SMU14 derives the default PPT limit from SocketPowerLimitAc/Dc, but
MsgLimits.Power may expose a different firmware limit for the same PPT0
throttler. Using those values independently as fixed min/max bases can
report an incorrect configurable power range.
Keep the socket power limit as the default value and as the fallback for
current-limit queries. Calculate the reported range from both firmware
values instead, using the lower value as the minimum base and the higher
value as the maximum base before applying OD percentages.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Remove the legacy ras_smu_drv interface implementation for SMU v13.0.12
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Ce Sun <cesun102@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Remove the legacy smu ras driver framework
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Ce Sun <cesun102@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
Dave Airlie
Dan Carpenter
Shubhankar Milind Sardeshpande
Lijo Lazar
Priya Hosur
Yang Wang
Kanala Ramalingeswara Reddy
Fares Soliman
Mario Limonciello
Timur Kristóf
Michał Mirosław
Asad Kamal
Ce Sun