aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/drivers/media/i2c/ccs/ccs-core.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2025-04-25media: ccs: Don't complain about missing "clock-frequency" propertySakari Ailus1-2/+0
The clock frequency is often available via the clock itself and not read by the driver from the "clock-frequency" property. Don't complain if the property doesn't exist. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-04-25media: ccs: Don't complain about lack of quirksSakari Ailus1-4/+0
Generally any deviance from the standard is handled via CCS static data nowadays and so not having quirks is expected. Don't warn about it. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-04-25media: ccs: Use read_poll_timeout() in reset pollingSakari Ailus1-13/+9
Use read_poll_timeout() in polling the device after a reset, either hard or soft. While at it, improve the related error message. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-04-25media: ccs: Try a little longer to access the sensor before giving upSakari Ailus1-13/+13
Some sensors take longer to respond after reset than the spec-required time. Try up to 1 s for the sensor to become accessible. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-04-25media: ccs-pll: Drop LINK_DECOUPLED flagSakari Ailus1-1/+0
The LINK_DECOUPLED flag isn't used by the PLL calculator other than printing it. The number of OP/VT lanes are already printed in any case. Thus drop the flag as it has no function. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-15media: i2c: ccs: Set the device's runtime PM status correctly in probeSakari Ailus1-0/+1
Set the device's runtime PM status to suspended in probe error paths where it was previously set to active. Fixes: 9447082ae666 ("[media] smiapp: Implement power-on and power-off sequences without runtime PM") Cc: stable@vger.kernel.org # for >= v5.15 Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-15media: i2c: ccs: Set the device's runtime PM status correctly in removeSakari Ailus1-2/+3
Set the device's runtime PM status to suspended in device removal only if it wasn't suspended already. Fixes: 9447082ae666 ("[media] smiapp: Implement power-on and power-off sequences without runtime PM") Cc: stable@vger.kernel.org # for >= v5.15 Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2024-12-19media: ccs: Fail the probe on CCS static data parser failureMehdi Djait1-4/+8
No need to continue probing when the CCS static data parser fails. Improve this by checking the return value and correctly exiting on failure. Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2024-12-19media: ccs: Fix cleanup order in ccs_probe()Mehdi Djait1-3/+3
ccs_limits is allocated in ccs_read_all_limits() after the allocation of mdata.backing. Ensure that resources are freed in the reverse order of their allocation by moving out_free_ccs_limits up. Fixes: a11d3d6891f0 ("media: ccs: Read CCS static data from firmware binaries") Cc: stable@vger.kernel.org Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2024-02-12PM: runtime: Simplify pm_runtime_get_if_active() usageSakari Ailus1-1/+1
There are two ways to opportunistically increment a device's runtime PM usage count, calling either pm_runtime_get_if_active() or pm_runtime_get_if_in_use(). The former has an argument to tell whether to ignore the usage count or not, and the latter simply calls the former with ign_usage_count set to false. The other users that want to ignore the usage_count will have to explicitly set that argument to true which is a bit cumbersome. To make this function more practical to use, remove the ign_usage_count argument from the function. The main implementation is in a static function called pm_runtime_get_conditional() and implementations of pm_runtime_get_if_active() and pm_runtime_get_if_in_use() are moved to runtime.c. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Alex Elder <elder@linaro.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Takashi Iwai <tiwai@suse.de> # sound/ Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> # drivers/accel/ivpu/ Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> # drivers/gpu/drm/i915/ Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> # drivers/pci/ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-12-04media: ccs: Use V4L2 CCI for accessing sensor registersSakari Ailus1-42/+42
Use V4L2 CCI for accessing device's registers. The 8-bit compatibility read option is removed but this is supported by regmap through other means. Also the CCS register definitions are re-generated with V4L2 CCI definitions. The older SMIA++ register definitions have been manually converted. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-12-04media: ccs: Print ireal and float limits converted to integersSakari Ailus1-4/+13
A number of CCS register value limits are in ireal or float format. Also convert them to integers for easier interpretation. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-12-04media: v4l2-subdev: Rename .init_cfg() operation to .init_state()Laurent Pinchart1-3/+3
The subdev .init_cfg() operation is affected by two issues: - It has long been extended to initialize a whole v4l2_subdev_state instead of just a v4l2_subdev_pad_config, but its name has stuck around. - Despite operating on a whole subdev state and not being directly exposed to the subdev users (either in-kernel or through the userspace API), .init_cfg() is categorized as a subdev pad operation. This participates in making the subdev API confusing for new developers. Fix it by renaming the operation to .init_state(), and make it a subdev internal operation. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Michael Riesch <michael.riesch@wolfvision.net> # for imx415 Acked-by: Shuah Khan <skhan@linuxfoundation.org> # for vimc Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> [Sakari Ailus: Resolved a conflict in Renesas vsp1 driver.] Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-11-23media: v4l: subdev: Switch to stream-aware state functionsSakari Ailus1-11/+11
Switch all drivers accessing sub-device state to use the stream-aware functions. We will soon remove the old ones. This patch has been generated using the following Coccinelle script: ---------8<------------ @@ expression E1, E2, E3; @@ - v4l2_subdev_get_pad_format(E1, E2, E3) + v4l2_subdev_state_get_format(E2, E3) @@ expression E1, E2, E3; @@ - v4l2_subdev_get_pad_crop(E1, E2, E3) + v4l2_subdev_state_get_crop(E2, E3) @@ expression E1, E2, E3; @@ - v4l2_subdev_get_pad_compose(E1, E2, E3) + v4l2_subdev_state_get_compose(E2, E3) @@ expression E1, E2, E3; @@ - v4l2_subdev_get_try_format(E1, E2, E3) + v4l2_subdev_state_get_format(E2, E3) @@ expression E1, E2, E3; @@ - v4l2_subdev_get_try_crop(E1, E2, E3) + v4l2_subdev_state_get_crop(E2, E3) @@ expression E1, E2, E3; @@ - v4l2_subdev_get_try_compose(E1, E2, E3) + v4l2_subdev_state_get_compose(E2, E3) ---------8<------------ Additionally drivers/media/i2c/s5k5baf.c and drivers/media/platform/samsung/s3c-camif/camif-capture.c have been manually changed as Coccinelle didn't. Further local variables have been removed as they became unused as a result of the other changes. Also Coccinelle introduced indentation by space in files drivers/media/i2c/st-mipid02.c and drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c. This has been also corrected. The diff from Coccinelle-generated changes are: > diff --git b/drivers/media/i2c/imx319.c a/drivers/media/i2c/imx319.c > index e549692ff478..420984382173 100644 > --- b/drivers/media/i2c/imx319.c > +++ a/drivers/media/i2c/imx319.c > @@ -2001,7 +2001,6 @@ static int imx319_do_get_pad_format(struct imx319 *imx319, > struct v4l2_subdev_format *fmt) > { > struct v4l2_mbus_framefmt *framefmt; > - struct v4l2_subdev *sd = &imx319->sd; > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad); > diff --git b/drivers/media/i2c/imx355.c a/drivers/media/i2c/imx355.c > index 96bdde685d65..e1b1d2fc79dd 100644 > --- b/drivers/media/i2c/imx355.c > +++ a/drivers/media/i2c/imx355.c > @@ -1299,7 +1299,6 @@ static int imx355_do_get_pad_format(struct imx355 *imx355, > struct v4l2_subdev_format *fmt) > { > struct v4l2_mbus_framefmt *framefmt; > - struct v4l2_subdev *sd = &imx355->sd; > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad); > diff --git b/drivers/media/i2c/ov08x40.c a/drivers/media/i2c/ov08x40.c > index ca799bbcfdb7..abbb0b774d43 100644 > --- b/drivers/media/i2c/ov08x40.c > +++ a/drivers/media/i2c/ov08x40.c > @@ -2774,7 +2774,6 @@ static int ov08x40_do_get_pad_format(struct ov08x40 *ov08x, > struct v4l2_subdev_format *fmt) > { > struct v4l2_mbus_framefmt *framefmt; > - struct v4l2_subdev *sd = &ov08x->sd; > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad); > diff --git b/drivers/media/i2c/ov13858.c a/drivers/media/i2c/ov13858.c > index 7816d9787c61..09387e335d80 100644 > --- b/drivers/media/i2c/ov13858.c > +++ a/drivers/media/i2c/ov13858.c > @@ -1316,7 +1316,6 @@ static int ov13858_do_get_pad_format(struct ov13858 *ov13858, > struct v4l2_subdev_format *fmt) > { > struct v4l2_mbus_framefmt *framefmt; > - struct v4l2_subdev *sd = &ov13858->sd; > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad); > diff --git b/drivers/media/i2c/ov13b10.c a/drivers/media/i2c/ov13b10.c > index 268cd4b03f9c..c06411d5ee2b 100644 > --- b/drivers/media/i2c/ov13b10.c > +++ a/drivers/media/i2c/ov13b10.c > @@ -1001,7 +1001,6 @@ static int ov13b10_do_get_pad_format(struct ov13b10 *ov13b, > struct v4l2_subdev_format *fmt) > { > struct v4l2_mbus_framefmt *framefmt; > - struct v4l2_subdev *sd = &ov13b->sd; > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad); > diff --git b/drivers/media/i2c/s5c73m3/s5c73m3-core.c a/drivers/media/i2c/s5c73m3/s5c73m3-core.c > index 47605e36bc60..8f9b5713daf7 100644 > --- b/drivers/media/i2c/s5c73m3/s5c73m3-core.c > +++ a/drivers/media/i2c/s5c73m3/s5c73m3-core.c > @@ -819,7 +819,6 @@ static void s5c73m3_oif_try_format(struct s5c73m3 *state, > struct v4l2_subdev_format *fmt, > const struct s5c73m3_frame_size **fs) > { > - struct v4l2_subdev *sd = &state->sensor_sd; > u32 code; > > switch (fmt->pad) { > diff --git a/drivers/media/i2c/s5k5baf.c b/drivers/media/i2c/s5k5baf.c > index 67da2045f543..03ccfb0e1e11 100644 > --- a/drivers/media/i2c/s5k5baf.c > +++ b/drivers/media/i2c/s5k5baf.c > @@ -1472,14 +1472,11 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd, > > if (sel->which == V4L2_SUBDEV_FORMAT_TRY) { > rects = (struct v4l2_rect * []) { > - &s5k5baf_cis_rect, > - v4l2_subdev_get_try_crop(sd, sd_state, > - PAD_CIS), > - v4l2_subdev_get_try_compose(sd, sd_state, > - PAD_CIS), > - v4l2_subdev_get_try_crop(sd, sd_state, > - PAD_OUT) > - }; > + &s5k5baf_cis_rect, > + v4l2_subdev_state_get_crop(sd_state, PAD_CIS), > + v4l2_subdev_state_get_compose(sd_state, PAD_CIS), > + v4l2_subdev_state_get_crop(sd_state, PAD_OUT) > + }; > s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); > return 0; > } > diff --git b/drivers/media/platform/samsung/s3c-camif/camif-capture.c a/drivers/media/platform/samsung/s3c-camif/camif-capture.c > index 295e083f38e8..be58260ea67e 100644 > --- b/drivers/media/platform/samsung/s3c-camif/camif-capture.c > +++ a/drivers/media/platform/samsung/s3c-camif/camif-capture.c > @@ -1216,7 +1216,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd, > struct v4l2_mbus_framefmt *mf = &fmt->format; > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > - mf = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad); > + mf = v4l2_subdev_state_get_format(sd_state, fmt->pad); > fmt->format = *mf; > return 0; > } > @@ -1305,7 +1305,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd, > __camif_subdev_try_format(camif, mf, fmt->pad); > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > - mf = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad); > + mf = v4l2_subdev_state_get_format(sd_state, fmt->pad); > *mf = fmt->format; > mutex_unlock(&camif->lock); > return 0; > diff --git b/drivers/media/platform/ti/cal/cal-camerarx.c a/drivers/media/platform/ti/cal/cal-camerarx.c > index cea454ed9c20..61433744c6c4 100644 > --- b/drivers/media/platform/ti/cal/cal-camerarx.c > +++ a/drivers/media/platform/ti/cal/cal-camerarx.c > @@ -621,8 +621,6 @@ static int cal_camerarx_sd_enum_mbus_code(struct v4l2_subdev *sd, > struct v4l2_subdev_state *state, > struct v4l2_subdev_mbus_code_enum *code) > { > - struct cal_camerarx *phy = to_cal_camerarx(sd); > - > /* No transcoding, source and sink codes must match. */ > if (cal_rx_pad_is_source(code->pad)) { > struct v4l2_mbus_framefmt *fmt; > diff --git b/drivers/staging/media/imx/imx-ic-prp.c a/drivers/staging/media/imx/imx-ic-prp.c > index dd558fac6477..61d69f19657e 100644 > --- b/drivers/staging/media/imx/imx-ic-prp.c > +++ a/drivers/staging/media/imx/imx-ic-prp.c > @@ -82,8 +82,6 @@ static struct v4l2_mbus_framefmt * > __prp_get_fmt(struct prp_priv *priv, struct v4l2_subdev_state *sd_state, > unsigned int pad, enum v4l2_subdev_format_whence which) > { > - struct imx_ic_priv *ic_priv = priv->ic_priv; > - > if (which == V4L2_SUBDEV_FORMAT_TRY) > return v4l2_subdev_state_get_format(sd_state, pad); > else > diff --git b/drivers/staging/media/imx/imx-ic-prpencvf.c a/drivers/staging/media/imx/imx-ic-prpencvf.c > index 02db7dbb884b..ec73c901079e 100644 > --- b/drivers/staging/media/imx/imx-ic-prpencvf.c > +++ a/drivers/staging/media/imx/imx-ic-prpencvf.c > @@ -790,8 +790,6 @@ static struct v4l2_mbus_framefmt * > __prp_get_fmt(struct prp_priv *priv, struct v4l2_subdev_state *sd_state, > unsigned int pad, enum v4l2_subdev_format_whence which) > { > - struct imx_ic_priv *ic_priv = priv->ic_priv; > - > if (which == V4L2_SUBDEV_FORMAT_TRY) > return v4l2_subdev_state_get_format(sd_state, pad); > else > diff --git a/drivers/media/i2c/st-mipid02.c b/drivers/media/i2c/st-mipid02.c > index 9c9361354c00..b08a249b5fdd 100644 > --- a/drivers/media/i2c/st-mipid02.c > +++ b/drivers/media/i2c/st-mipid02.c > @@ -751,7 +751,7 @@ static void mipid02_set_fmt_source(struct v4l2_subdev *sd, > format->format = bridge->fmt; > else > format->format = *v4l2_subdev_state_get_format(sd_state, > - MIPID02_SINK_0); > + MIPID02_SINK_0); > > /* but code may need to be converted */ > format->format.code = serial_to_parallel_code(format->format.code); > diff --git a/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c b/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c > index 117912d3bfbd..96353648c032 100644 > --- a/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c > +++ b/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c > @@ -319,7 +319,7 @@ static void rkisp1_isp_start(struct rkisp1_isp *isp, > rkisp1_write(rkisp1, RKISP1_CIF_ISP_CTRL, val); > > src_fmt = v4l2_subdev_state_get_format(sd_state, > - RKISP1_ISP_PAD_SOURCE_VIDEO); > + RKISP1_ISP_PAD_SOURCE_VIDEO); > src_info = rkisp1_mbus_info_get_by_code(src_fmt->code); > > if (src_info->pixel_enc != V4L2_PIXEL_ENC_BAYER) > @@ -475,9 +475,9 @@ static void rkisp1_isp_set_src_fmt(struct rkisp1_isp *isp, > sink_fmt = v4l2_subdev_state_get_format(sd_state, > RKISP1_ISP_PAD_SINK_VIDEO); > src_fmt = v4l2_subdev_state_get_format(sd_state, > - RKISP1_ISP_PAD_SOURCE_VIDEO); > + RKISP1_ISP_PAD_SOURCE_VIDEO); > src_crop = v4l2_subdev_state_get_crop(sd_state, > - RKISP1_ISP_PAD_SOURCE_VIDEO); > + RKISP1_ISP_PAD_SOURCE_VIDEO); > > /* > * Media bus code. The ISP can operate in pass-through mode (Bayer in, Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-11-22media: ccs: Ensure control handlers have been set up after probeSakari Ailus1-1/+4
If the sensor remains powered on after probe when it is needed again and the runtime PM usage_count is incremented, the control handler setup for neither control handler is run. As this is, in most cases, a needless operation in probe, track the status of sensor power handling after probe and set up control handlers even if the device was already active right after probe. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-12media: ccs: Fix a (harmless) lockdep warningSakari Ailus1-5/+12
The v4l2_subdev_init_finalize() is a macro that creates an unique lockdep key and name. As the CCS driver initialises all three of its sub-devices using the same call site, this creates a lockdep warning. Address it. Fixes: d8bca3ed1d70 ("media: ccs: Use sub-device active state") Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-12media: ccs: Rework initialising sub-device stateSakari Ailus1-17/+28
Initialise sub-device state in init_cfg callback using ccs_propagate() to the extent it covers of the initialisation. This fixes a bug where the driver configuration was incorrectly initialised. Fixes: d8bca3ed1d70 ("media: ccs: Use sub-device active state") Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-07media: ccs: Drop re-entrant s_stream supportSakari Ailus1-3/+0
The s_stream is called to enable and to disable streaming on a sub-device. The caller may only call it to change the state, enabling streaming is not allowed when it is already disabled, and similarly for disabling streaming. Remove the check from the CCS driver. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-07media: ccs: Partially revert "media: i2c: Use pm_runtime_resume_and_get()"Sakari Ailus1-3/+3
ccs_pm_get_init() depends on the return values > 0 of pm_runtime_get_sync(), thus it can't use pm_runtime_resume_and_get(). There's even a comment in the driver on this, a few lines above the code. Fixes: aa0adb399d09 ("media: i2c: Use pm_runtime_resume_and_get()") Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-07media: ccs: Use sub-device active stateSakari Ailus1-183/+103
Make use of sub-device active state. In most cases the effect on need for acquiring the mutex is non-existent as access to the driver's core data structure still needs to be serialised. This still removes a lot of code as the code paths for active and try state are the same in many cases. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-07media: ccs: Obtain media bus formats before initialising up sub-devicesSakari Ailus1-6/+6
The available mbus codes will soon be needed earlier, at the time sub-devices are initialisaed. This is due to calling init_cfg() op via the v4l2_subdev_init_finalize(). Move ccs_get_mbus_formats() before ccs_init_subdev() calls. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-07media: ccs: Move media_entity_pads_init to init from registerSakari Ailus1-39/+36
The media entity will soon need to be initialised before the sub-device init finalisation that allocates memory for sub-device state. Do that now. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-07media: ccs: Rename ccs_create_subdev as ccs_init_subdevSakari Ailus1-9/+9
The ccs_create_subdev() function initialises a sub-device in the CCS driver, including CCS specific needs. Rename it as ccs_init_subdev() as it better reflects what the function does. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-07media: ccs: Switch to init_cfgSakari Ailus1-11/+6
Use init_cfg() instead of manually setting up defaults in file handle open. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-07media: ccs: Correct error handling in ccs_register_subdevSakari Ailus1-3/+10
ccs_register_subdev() did not clean up the media entity in error case, do that now. Also switch to goto based error handling. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-07media: ccs: Correctly initialise try compose rectangleSakari Ailus1-1/+1
Initialise the try sink compose rectangle size to the sink compose rectangle for binner and scaler sub-devices. This was missed due to the faulty condition that lead to the compose rectangles to be initialised for the pixel array sub-device where it is not relevant. Fixes: ccfc97bdb5ae ("[media] smiapp: Add driver") Cc: stable@vger.kernel.org Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27media: i2c: ccs: Drop system suspend and resume handlersLaurent Pinchart1-37/+0
Stopping streaming on a camera pipeline at system suspend time, and restarting it at system resume time, requires coordinated action between the bridge driver and the camera sensor driver. This is handled by the bridge driver calling the sensor's .s_stream() handler at system suspend and resume time. There is thus no need for the sensor to independently implement system sleep PM operations. Drop them. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27media: i2c: Use pm_runtime_resume_and_get()Laurent Pinchart1-3/+3
Simplify error handling by using pm_runtime_resume_and_get() instead of pm_runtime_get_sync() with a put call in the error path. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> (st-vgxy61) Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-05-25media: Switch i2c drivers back to use .probe()Uwe Kleine-König1-1/+1
After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then commit 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert back to (the new) .probe() to be able to eventually drop .probe_new() from struct i2c_driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-04-11media: ccs: Differentiate SMIA and MIPI vendors in static dataSakari Ailus1-19/+55
MIPI CCS uses a 16-bit MIPI manufacturer identifier for firmware filenames compared to older 8-bit identifier used by SMIA. The requested firmware files used the MIPI manufacturer ID even for SMIA compliant devices, effectively making the manufacturer ID 0. While CCS static data is a feature of CCS 1.1, it has no hardware dependencies. Making this feature available for SMIA devices helps adding support for them and avoids requesting ill-generated CCS static data file names. The files are named as: ccs/smiapp-module-vv-mmmm-rrrr.fw, ccs/smiapp-sensor-vv-mmmm-rr.fw and ccs/smia-sensor-vv-mmmm-rr.fw where vv is the manufacturer ID, mmmm is the model ID and rr or rrrr is the revision number. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-04-11media: ccs: Apply module manufacturer hack on non-CCS devices onlySakari Ailus1-13/+12
Some modules don't have any model identification information in the register address space. The driver as a SMIA++ driver attempted to use sensor information in this case. This workaround is definitely not for CCS devices. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-04-11media: ccs: Support 16-bit sensor revision number registerSakari Ailus1-1/+5
Read 16-bit sensor revision number if the 8-bit register has value 0. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-04-11media: ccs: Add V4L2 controls from propertiesSakari Ailus1-1/+11
Add V4L2 controls (currently CAMERA_SENSOR_ROTATION and CAMERA_SENSOR_ORIENTATION) from properties. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-04-11media: ccs: Align flipping behaviour with other driversSakari Ailus1-40/+0
No longer mirror flipping controls if the sensor is mounted upside down. This way the behaviour of the flipping controls and rotation of the sensor are aligned with the rest of the drivers. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2022-08-16i2c: Make remove callback return voidUwe Kleine-König1-3/+1
The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-05-13media: ccs-core.c: fix failure to call clk_disable_unprepareHans Verkuil1-2/+5
Fixes smatch warning: drivers/media/i2c/ccs/ccs-core.c:1676 ccs_power_on() warn: 'sensor->ext_clk' from clk_prepare_enable() not released on lines: 1606. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-04-24media: ccs: Use unsigned int as index to an arraySakari Ailus1-2/+2
Use an unsigned int to index an array instead of a signed one. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-04-24media: ccs: Use %u for printing unsigned values, remove extra debug printSakari Ailus1-17/+15
Use %u for printing unsigned integer or u32 values. In a lot of cases %d was being used instead. Also remove an extra debug print --- the number of lanes is already printed by V4L2 when parsing fwnode endpoints when dynamic debug is enabled. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-03-04media: i2c: ccs: Drop unused includeLinus Walleij1-1/+0
The driver already includes <linux/gpio/consumer.h> which is what it uses, drop the legacy <linux/gpio.h> include. Cc: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
2021-11-15media: i2c: ccs: replace snprintf in show functions with sysfs_emitQing Wang1-6/+6
show() should not use snprintf() when formatting the value to be returned to user space. Fix the following coccicheck warning: drivers/media/i2c/ccs/ccs-core.c:3761: WARNING: use scnprintf or sprintf. Signed-off-by: Qing Wang <wangqing@vivo.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-08-04media: ccs: Implement support for manual LP controlSakari Ailus1-0/+47
Use the pre_streamon callback to transition the transmitter to either LP-11 or LP-111 mode if supported by the sensor. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-08-04media: i2c: use DEVICE_ATTR_RO() helper macroZhen Lei1-7/+4
Use DEVICE_ATTR_RO() helper macro instead of DEVICE_ATTR(), which is simpler and more readable. Due to the name of the read function of the sysfs attribute is normalized, there is a natural association. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-17media: v4l2-subdev: add subdev-wide state structTomi Valkeinen1-40/+44
We have 'struct v4l2_subdev_pad_config' which contains configuration for a single pad used for the TRY functionality, and an array of those structs is passed to various v4l2_subdev_pad_ops. I was working on subdev internal routing between pads, and realized that there's no way to add TRY functionality for routes, which is not pad specific configuration. Adding a separate struct for try-route config wouldn't work either, as e.g. set-fmt needs to know the try-route configuration to propagate the settings. This patch adds a new struct, 'struct v4l2_subdev_state' (which at the moment only contains the v4l2_subdev_pad_config array) and the new struct is used in most of the places where v4l2_subdev_pad_config was used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config are changed to instead take v4l2_subdev_state. The changes to drivers/media/v4l2-core/v4l2-subdev.c and include/media/v4l2-subdev.h were written by hand, and all the driver changes were done with the semantic patch below. The spatch needs to be applied to a select list of directories. I used the following shell commands to apply the spatch: dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media" for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done Note that Coccinelle chokes on a few drivers (gcc extensions?). With minor changes we can make Coccinelle run fine, and these changes can be reverted after spatch. The diff for these changes is: For drivers/media/i2c/s5k5baf.c: @@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd, &s5k5baf_cis_rect, v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS), v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS), - v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT) + v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT), }; s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); return 0; For drivers/media/platform/s3c-camif/camif-capture.c: @@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd, *mf = camif->mbus_fmt; break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* crop rectangle at camera interface input */ mf->width = camif->camif_crop.width; mf->height = camif->camif_crop.height; @@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd, } break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* Pixel format can be only changed on the sink pad. */ mf->code = camif->mbus_fmt.code; mf->width = crop->width; The semantic patch is: // <smpl> // Change function parameter @@ identifier func; identifier cfg; @@ func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...) { <... - cfg + sd_state ...> } // Change function declaration parameter @@ identifier func; identifier cfg; type T; @@ T func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...); // Change function return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...) { ... } // Change function declaration return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...); // Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it // inside a pad_state. @@ identifier func; identifier pad_cfg; @@ func(...) { ... struct v4l2_subdev_pad_config pad_cfg; + struct v4l2_subdev_state pad_state = { .pads = &pad_cfg }; <+... ( v4l2_subdev_call | sensor_call | isi_try_fse | isc_try_fse | saa_call_all ) (..., - &pad_cfg + &pad_state ,...) ...+> } // If the function uses fields from pad_config, access via state->pads @@ identifier func; identifier state; @@ func(..., struct v4l2_subdev_state *state , ...) { <... ( - state->try_fmt + state->pads->try_fmt | - state->try_crop + state->pads->try_crop | - state->try_compose + state->pads->try_compose ) ...> } // If the function accesses the filehandle, use fh->state instead @@ struct v4l2_subdev_fh *fh; @@ - fh->pad + fh->state @@ struct v4l2_subdev_fh fh; @@ - fh.pad + fh.state // Start of vsp1 specific @@ @@ struct vsp1_entity { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... }; @@ symbol entity; @@ vsp1_entity_init(...) { ... entity->config = - v4l2_subdev_alloc_pad_config + v4l2_subdev_alloc_state (&entity->subdev); ... } @@ symbol entity; @@ vsp1_entity_destroy(...) { ... - v4l2_subdev_free_pad_config + v4l2_subdev_free_state (entity->config); ... } @exists@ identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)"; symbol config; @@ func(...) { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... } // End of vsp1 specific // Start of rcar specific @@ identifier sd; identifier pad_cfg; @@ rvin_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } // End of rcar specific // Start of rockchip specific @@ identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)"; symbol rsz; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = rsz->pad_cfg }; ... - rsz->pad_cfg + &state ... } @@ identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)"; symbol isp; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = isp->pad_cfg }; ... - isp->pad_cfg + &state ... } @@ symbol rkisp1; symbol isp; symbol pad_cfg; @@ rkisp1_isp_register(...) { + struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg }; ... - rkisp1->isp.pad_cfg + &state ... } // End of rockchip specific // Start of tegra-video specific @@ identifier sd; identifier pad_cfg; @@ __tegra_channel_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } @@ identifier sd_state; @@ __tegra_channel_try_format(...) { ... struct v4l2_subdev_state *sd_state; <... - sd_state->try_crop + sd_state->pads->try_crop ...> } // End of tegra-video specific // </smpl> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-19media: i2c: ccs-core: use pm_runtime_resume_and_get()Mauro Carvalho Chehab1-5/+2
Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter") added pm_runtime_resume_and_get() in order to automatically handle dev->power.usage_count decrement on errors. Use the new API, in order to cleanup the error check logic. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-10media: i2c: ccs-core: fix pm_runtime_get_sync() usage countMauro Carvalho Chehab1-10/+22
The pm_runtime_get_sync() internally increments the dev->power.usage_count without decrementing it, even on errors. There is a bug at ccs_pm_get_init(): when this function returns an error, the stream is not started, and RPM usage_count should not be incremented. However, if the calls to v4l2_ctrl_handler_setup() return errors, it will be kept incremented. At ccs_suspend() the best is to replace it by the new pm_runtime_resume_and_get(), introduced by: commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter") in order to properly decrement the usage counter automatically, in the case of errors. Fixes: 96e3a6b92f23 ("media: smiapp: Avoid maintaining power state information") Cc: stable@vger.kernel.org Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-10media: i2c: ccs-core: return the right error code at suspendMauro Carvalho Chehab1-1/+1
If pm_runtime resume logic fails, return the error code provided by it, instead of -EAGAIN, as, depending on what caused it to fail, it may not be something that would be recovered. Fixes: cbba45d43631 ("[media] smiapp: Use runtime PM") Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-06media: v4l: fwnode: Rename v4l2_async_register_subdev_sensor_commonSakari Ailus1-1/+1
Rename v4l2_async_register_subdev_sensor_common as v4l2_async_register_subdev_sensor. This is a part of the effort to make the long names present in V4L2 fwnode and async frameworks shorter. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-06media: ccs: Fix sub-device functionSakari Ailus1-2/+2
Fix sub-device function for the pixel array and the scaler. It seems that the pixel array had gotten assigned as SCALER whereas the scaler had CAM_SENSOR function. Fix this by setting the pixel array function to CAM_SENSOR and that of scaler to SCALER. Fixes: 9ec2ac9bd0f9 ("media: ccs: Give all subdevs a function") Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-12media: ccs: Switch from standard integer types to kernel onesSakari Ailus1-1/+1
The preferred integer types in the kernel are the Linux specific ones, switch from standard C types to u32 and alike. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-12media: ccs: Support and default to auto PHY controlSakari Ailus1-11/+43
CCS supports three variants of PHY timing control, auto, UI based and manual. The driver previously assumed UI based control that requires updating the link rate to the sensor. Now default to automatic control instead, and only write the link rate to the sensor in UI mode. If neither auto or UI control is supported, return an error in probe. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.