| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull media updates from Mauro Carvalho Chehab:
- v4l2-core: added ISP statistics support and per-block validation
- v4l2-core: Allow unknown HDR10 white point and luminance
- New camera sensors: Sony IMX678 and IMX471m, Himax HM1092 IR sensor
- New codec: Milos: VPU v2.0 codec support
- isp driver: gained support for Dreamchip RPPX1 ISP framework
- vsp1 driver: gained support for RZ/T2H and RZ/N2H
- Novalake driver: gained CVS support for new NVL hardware
- dvb-core: fix feed leak on failed DMX_ADD_PID
- several driver fixes, cleanups and minor improvements
* tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (308 commits)
media: ipu-bridge: check all DMI entries when overriding sensor rotation
media: v4l2-async: avoid deleting unlinked ASC entry on link error
media: rzg2l-cru: Align bytesperline to hardware DMA stride requirement
media: intel/ipu6: fix async notifier cleanup leak on parse error
media: staging/ipu7: fix async notifier UAF on probe error path
media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path
media: amd: isp4: release partial allocations in isp4if_alloc_fw_gpumem()
media: rcar-isp: Fix VSPX reference leaks
media: rcar-isp: Release ISPCORE resources
media: i2c: imx415: Release runtime PM reference on VBLANK error
media: i2c: imx415: Return test pattern write errors
media: renesas: vsp1: Declare index variables in for loop statement
media: renesas: vsp1: Make reset control optional to support platforms without a reset line
media: dt-bindings: media: renesas,vsp1: Document RZ/T2H and RZ/N2H SoCs
media: dt-bindings: media: renesas,fcp: Document RZ/T2H and RZ/N2H SoCs
media: nxp: imx8-isi: Add additional 32-bit RGB format support
media: nxp: imx8-isi: Add 16-bit raw Bayer format support
media: nxp: imx8-isi: Implement per-stream reference counting for multiplexed streams
media: nxp: imx8-isi: Use BIT_ULL() for 64-bit stream masks
media: nxp: imx8-isi: Correct color map between V4L2 and ISI
...
|
|
Rename v4l2_isp_params_buffer_size() to v4l2_isp_buffer_size() to
support statistics.
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
Add support for Gamma curve correction for the Mali C55 ISP.
Define a new block in the uAPI using the extensible v4l2-isp format and
implement support for configuring the RGB Gamma parameters in the
mali-c55 parameters handler.
While at it, rename the MALI_C55_REG_GAMMA_GAINS_[1|2] register name
to MALI_C55_REG_GAMMA_GAINS_[RG|B] and the
MALI_C55_REG_GAMMA_OFFSETS_[1|2] register name to
MALI_C55_REG_GAMMA_OFFSETS_[RG|B] to better clarify their intent.
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add support for the CCM (Color Correction Matrix) for the Mali C55 ISP.
Define a new block in the uAPI using the extensible v4l2-isp format and
implement support for configuring the CCM parameters in the mali-c55
ISP driver.
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
__mali_c55_power_on() enables the clocks before deasserting the resets,
but bails out on a deassert failure without disabling them again. Both
callers treat a failed power-on as already cleaned up, so the clocks are
left enabled.
Disable them on the error path.
Fixes: d5f281f3dd29 ("media: mali-c55: Add Mali-C55 ISP driver")
Cc: stable@vger.kernel.org
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
In mali_c55_register_cap_dev(), a failure of media_entity_pads_init()
destroys cap_dev->lock inline and then jumps to err_destroy_mutex, which
destroys the same mutex a second time. Calling mutex_destroy() twice is
harmless, so this is not a bugfix, but the inline call is redundant: the
err_destroy_mutex label already covers this path, just like the switch
default case immediately above.
Drop the inline mutex_destroy() and rely solely on the err_destroy_mutex
label, so the mutex is destroyed exactly once on every error path.
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The horizontal and vertical scaling factors multiply the crop dimensions
by MALI_C55_RSZ_SCALER_FACTOR, a Q4.20 factor of (1 << 20). Both operands
are 32-bit, so the multiplication wraps before the result is stored in
the u64 scale variables. For any crop dimension of 4096 or more (the
maximum is 8192) the value overflows; an 8192 to 4096 downscale yields a
TINC of zero, so the scaler never advances and the output is corrupted.
Define MALI_C55_RSZ_SCALER_FACTOR as a 64-bit constant so the
multiplication is performed in 64-bit.
Fixes: d5f281f3dd29 ("media: mali-c55: Add Mali-C55 ISP driver")
Cc: stable@vger.kernel.org
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The post-Iridix auto-exposure histogram disable bit in
MALI_C55_REG_METERING_CONFIG is bit 16, but MALI_C55_AEXP_IHIST_DISABLE
was defined with a shift of 12, copied from the AEXP_HIST definition
above it. As the value is masked with the BIT(16) disable mask when it
is programmed, the result is always zero and the disable bit is never
set. The IHIST can therefore never be disabled, neither at ISP init nor
via a parameters block flagged V4L2_ISP_PARAMS_FL_BLOCK_DISABLE, and the
hardware keeps producing histogram statistics that userspace believes
are switched off.
Use a shift of 16 so the disable request takes effect.
Fixes: d5f281f3dd29 ("media: mali-c55: Add Mali-C55 ISP driver")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The 15x15 AEC histogram metering grid has 225 per-zone weights, packed
by userspace as a u8 array. The driver writes the first 56 registers
(zones 0 through 223) in a loop, then handles the final register on its
own to keep static analysers from flagging the array access.
That separate path computes the address and value for the 225th weight
(the bottom-right zone) but never issues the register write, so the zone
keeps its stale or default weight. Any non-default weight userspace sets
for the last zone is silently ignored, skewing auto-exposure metering.
Both the AEXP_HIST_WEIGHTS and AEXP_IHIST_WEIGHTS blocks are affected as
they share this handler.
Issue the missing write, masking the value as the loop does.
Fixes: 01535ea08674 ("media: platform: Add mali-c55 parameters video node")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Replace the #include of <linux/mod_devicetable.h> by the more specific
<linux/device-id/*.h> where applicable. For most cases the include
can be dropped completely, only a few drivers need one or two headers
added.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/1a3f2007c5c5dcf555c09a4035ce3ae8ef1b6c49.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
|
|
When mali_c55_media_frameworks_init() fails, the goto target jumps to
err_free_context_registers, skipping pm_runtime_disable() despite
pm_runtime having already been enabled earlier in the function.
Fix this by adding an err_pm_runtime_disable label and redirecting the
frameworks init failure to it, so pm_runtime is properly unwound on
that error path. The runtime PM status is also set back to suspended
before disabling, to undo the pm_runtime_set_active() from probe.
Cc: stable@vger.kernel.org
Fixes: d5f281f3dd29 ("media: mali-c55: Add Mali-C55 ISP driver")
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The Mali C55 driver doesn't depend on PM. For this reason, if pm_runtime
is not compiled in it is required to manually power-off the peripheral
during the driver's remove() handler.
Also pm_runtime_enable() is called during probe but mali_c55_remove()
never calls pm_runtime_disable(), leaving the device's runtime PM state
enabled after the driver is unbound.
Manually power-off the peripheral in remove() if the peripheral has not
been suspended using runtime_pm and disable runtime pm.
Cc: stable@vger.kernel.org
Fixes: d5f281f3dd29 ("media: mali-c55: Add Mali-C55 ISP driver")
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
mali_c55_probe() calls of_reserved_mem_device_init() to associate
reserved memory regions with the device. This function allocates a
struct rmem_assigned_device and adds it to a global linked list, which
must be explicitly released via of_reserved_mem_device_release() — there
is no devm variant of this API.
However, neither the probe error paths nor mali_c55_remove() called
of_reserved_mem_device_release(). Any probe failure after the
of_reserved_mem_device_init() call, as well as every normal device
removal, leaked the reserved memory association on the global list.
Fix this by adding an err_release_mem label at the end of the probe
error chain and calling of_reserved_mem_device_release() in
mali_c55_remove(). The remove teardown order is also corrected to call
mali_c55_media_frameworks_deinit() before kfree(), mirroring the probe
init order in reverse.
Cc: stable@vger.kernel.org
Fixes: d5f281f3dd29 ("media: mali-c55: Add Mali-C55 ISP driver")
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The media_pad_remote_pad_unique() function returns either a valid
pointer or an ERR_PTR() on failure (-ENOTUNIQ if multiple links are
enabled, -ENOLINK if no connected pad is found). The return value
was assigned directly to isp->remote_src and dereferenced in the
next line without checking for errors, which could lead to an
ERR_PTR dereference.
Add proper error checking with IS_ERR() before dereferencing the
pointer. Also set isp->remote_src to NULL on error to maintain
consistency with other error paths in the function.
Cc: stable@vger.kernel.org
Fixes: d5f281f3dd29 ("media: mali-c55: Add Mali-C55 ISP driver")
Signed-off-by: Alper Ak <alperyasinak1@gmail.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The platform_get_irq_byname() function already prints an error message
internally upon failure using dev_err_probe(). Therefore, the explicit
dev_err() is redundant and results in duplicate error logs.
Remove the redundant dev_err() call to clean up the error path.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The subdevices registered by the Mali-C55 driver do not have their
'struct device *dev' member initialized. This is visibile when looking
at debug message, as in example:
"(NULL device *): collect_streams: sub-device 'mali-c55 tpg' does not
support streams"
Fix this by initializing the *dev field for each subdevice registered
by the Mali-C55 driver.
Signed-off-by: jempty.liang <imntjempty@163.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Remove unnecessary semicolons reported by Coccinelle/coccicheck and the
semantic patch at scripts/coccinelle/misc/semicolon.cocci.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The Purple Fringe Correction module is enabled by default with a POR
configuration which might not be correct for the lens/sensor combination
in use.
If the Purple Fringe Correction module has to be used, it needs to be
supported in the driver's uAPI and properly configured by userspace.
As the driver doesn't support it at the moment, bypass it by default.
Reviewed-by: Barnabás Pőcze <barnabas.pocze@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The Iridix Tonemap engine, if not bypassed, applies a digital gain
in order to compensate under-exposed images.
This however breaks the exposure and gain regulation performed on the
sensor.
If the Iridix Tonemap has to be used, it need to be supported in the
ISP uAPI and properly configured by userspace.
As the driver doesn't support it at the moment, bypass it by default.
Reviewed-by: Barnabás Pőcze <barnabas.pocze@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The Mali C55 Iridix block has a digital gain function and tone mapping
function, whose enablement is controlled by two different bits
in the BYPASS_3 register.
Unfortunately, the "Gain" and "Tonemap" bypass bit definitions are the
wrong way around. Swap them.
Cc: stable@vger.kernel.org
Fixes: d5f281f3dd29 ("media: mali-c55: Add Mali-C55 ISP driver")
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Barnabás Pőcze <barnabas.pocze@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The Mali C55 driver uses an auto-suspend delay of 2000 milli-seconds.
As the delay is quite large, it is certainly possible that two
consecutive calls to enable_streams() do not go through a suspend of the
peripheral, meaning we cannot rely on POW register values for the ISP
configuration.
To prevent a streaming session to be initialized with settings from the
previous one, reset the full ISP configuration to know state disabling or
bypassing all the ISP blocks the driver supports.
Cc: stable@vger.kernel.org
Fixes: d5f281f3dd29 ("media: mali-c55: Add Mali-C55 ISP driver")
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The Mali C55 driver initializes the ISP in two points:
1) At probe time it disables ISP blocks by configuring them in bypass
mode
2) At enable_streams() it initializes the crop rectangles and the image
processing pipeline using the current image format
However, as ISP blocks are configured by userspace, if their
configuration is not reset, from the second enable_streams() call
onwards the ISP configuration will depend on the previous streaming
session configuration.
To re-initialize the ISP completely at enable_streams() time consolidate
the ISP block bypass configuration and the image processing path
configuration in a single function to be called at enabled_streams()
time.
Cc: stable@vger.kernel.org
Fixes: d5f281f3dd29 ("media: mali-c55: Add Mali-C55 ISP driver")
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Some bad copy&paste happened in the description of the ISP block types
and AWB_CONFIG got mixed up with SHADING_CONFIG.
Fix it by assigning to each block the correct type.
As only the comment is changed, there is no uABI breakage or regression.
Cc: stable@vger.kernel.org
Fixes: d5f281f3dd29 ("media: mali-c55: Add Mali-C55 ISP driver")
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Barnabás Pőcze <barnabas.pocze@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The Mali C55 driver uses the v4l2-isp framework, which performs
validation of the parameters buffer versioning in the
v4l2_isp_params_validate_buffer() function.
It is not necessary to replicate the validation of the parameters buffer
versioning in the platform-specific implementation.
Remove it.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
As the Mali-C55 driver is instrumented to work without depending on
CONFIG_PM, mark the two pm_runtime handlers as __maybe_unused to
suppress the compiler warning when compiling without CONFIG_PM.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
For each supported ISP block type the v4l2-isp framework expects
one handler and one block type info.
Static assert that the array of handlers is of the same size of the
array of block types info.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The v4l2_isp_params_block_info structure contains validation information
that apply to a block -type- and not only to a specific ISP block
implementation.
Clarify this by renaming v4l2_isp_params_block_info in
v4l2_isp_params_block_type_info and update the documentation and the
users of v4l2-isp accordingly.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add a new code file to the mali-c55 driver that registers an output
video node for userspace to queue buffers of parameters to. Handlers
are included to program the statistics generation plus the white
balance, black level correction and mesh shading correction blocks.
Update the rest of the driver to register and link the new video node
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Nayden Kanchev <nayden.kanchev@arm.com>
Co-developed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
[hverkuil: remove deprecated vb2_ops_wait_prepare/finish callbacks]
|
|
Add a new code file to govern the 3a statistics capture node.
On ISP_START, fill the stats buffer by reading out the metering space
in the ISP's memory. This is done for the non-active config just as
the dma transfer of the registers is. To acheive that, move the
checking of the current config outside of mali_c55_swap_next_config()
so we can use it for both functions.
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Nayden Kanchev <nayden.kanchev@arm.com>
Co-developed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
[hverkuil: remove deprecated vb2_ops_wait_prepare/finish callbacks]
|
|
Add a driver for Arm's Mali-C55 Image Signal Processor. The driver is
V4L2 and Media Controller compliant and creates subdevices to manage
the ISP itself, its internal test pattern generator as well as the
crop, scaler and output format functionality for each of its two
output devices.
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Nayden Kanchev <nayden.kanchev@arm.com>
Co-developed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
[hverkuil: remove deprecated vb2_ops_wait_prepare/finish callbacks]
|
Linus Torvalds
Jacopo Mondi
Jacopo Mondi
David Carlier
Uwe Kleine-König (The Capable Hub)
Alper Ak
Chen Ni
jempty.liang
Daniel Scally