| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull media updates from Mauro Carvalho Chehab:
- v4l2:
- core: fix subdev sensor ownership
- subdev: Allow accessing routes with STREAMS client capability
- ctrls: Add validation for HEVC active reference counts and
background detection control
- common: Add YUV24 format info and has_alpha helper
- vb2: Change vb2_read() and vb2_write() return types to ssize_t
- i2c: cvs: Add driver of Intel Computer Vision Sensing Controller(CVS)
- atmel-isc: remove deprecated driver
- cec: Add CEC Latency Indication Protocol (LIP) support
- imon: Add iMON VFD HID OEM v1.2 key mappings
- AVMatrix: new HWS capture driver
- isp4: new AMD capture driver
- qcom:
- iris: Add hierarchical coding, B-frame, and Long-Term Reference
support for encoder
- camss: Add SM6350 platform support
- venus: Add SM6115 platform support
- chips-media: wave5: Add support for Packed YUV422, CBP profile, and
background detection
- csi2rx: Add multistream support and 32 dma chans
- Several cleanups and fixes
* tag 'media/v7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (394 commits)
media: v4l2-fwnode: Fix subdev owner overwritten in v4l2_async_register_subdev_sensor()
media: qcom: iris: vdec: allow GEN2 decoding into 10bit format
media: qcom: iris: vdec: update find_format to handle 8bit and 10bit formats
media: qcom: iris: vdec: update size and stride calculations for 10bit formats
media: qcom: iris: gen2: add support for 10bit decoding
media: qcom: iris: add QC10C & P010 buffer size calculations
media: qcom: iris: add helpers for 8bit and 10bit formats
media: qcom: iris: Fix FPS calculation and VPP FW overhead
media: qcom: camss: vfe-340: Support for PIX client
media: qcom: camss: vfe-340: Proper client handling
media: qcom: camss: csid-340: Enable PIX interface routing
media: qcom: camss: csid-340: Add port-to-interface mapping
media: qcom: camss: csid-340: Switch to generic CSID_CFG/CTRL registers
media: iris: Initialize HFI ops after firmware load in core init
media: iris: drop struct iris_fmt
media: iris: Add platform data for X1P42100
media: iris: Add hardware power on/off ops for X1P42100
media: iris: optimize COMV buffer allocation for VPU3x and VPU4x
media: iris: add FPS calculation and VPP FW overhead in frequency formula
media: qcom: iris: Simplify COMV size calculation
...
|
|
Add support for the i.MX95 MIPI CSI-2 receiver. The i.MX95 variant is
nearly identical to i.MX93, with the main difference being the use of
IDI (Image Data Interface) instead of IPI (Image Pixel Interface).
However, the IDI interface is transparent to software, requiring only
a different register map definition while sharing the same PHY control
functions with i.MX93.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Guoniu Zhou <guoniu.zhou@oss.nxp.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
Implement waiting for D-PHY lanes to enter stop state on i.MX93. This
ensures proper PHY initialization by verifying that the clock lane and
all active data lanes have entered the stop state before proceeding with
further operations.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Guoniu Zhou <guoniu.zhou@oss.nxp.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
The current driver only supports single stream operation. Add support
for multiple concurrent streams by tracking enabled streams with a
bitmask and only initializing the hardware once for the first stream.
This enables use cases such as surround view systems where multiple
camera streams need to be processed simultaneously through the same
CSI-2 receiver interface.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Guoniu Zhou <guoniu.zhou@oss.nxp.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
Add higher bit-depth raw image data support for the sensors, which supports
16-bit output.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Guoniu Zhou <guoniu.zhou@oss.nxp.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
The imx93_csi2rx_dphy_ipi_enable() function configures the IPI datatype
using csi2->formats->csi_dt, which is initialized during probe but never
updated in set_fmt(). This causes the IPI to always use the probe-time
default datatype, ignoring the actual media bus format negotiated at
runtime. When userspace requests a different format, the IPI hardware is
configured with the wrong datatype, resulting in incorrect image output.
Fix by updating csi2->formats in the set_fmt callback to reflect the
currently negotiated format, ensuring the IPI configuration matches the
runtime datatype.
Fixes: ec40b431f0ab ("media: synopsys: csi2rx: add i.MX93 support")
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Guoniu Zhou <guoniu.zhou@oss.nxp.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
This patch continues the effort to refactor workqueue APIs, which has begun
with the changes introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6ccfb ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566af ("workqueue: Add new WQ_PERCPU flag")
The point of the refactoring is to eventually alter the default behavior of
workqueues to become unbound by default so that their workload placement is
optimized by the scheduler.
Before that to happen, workqueue users must be converted to the better named
new workqueues with no intended behaviour changes:
system_wq -> system_percpu_wq
system_unbound_wq -> system_dfl_wq
This way the old obsolete workqueues (system_wq, system_unbound_wq) can be
removed in the future.
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/all/20250221112003.1dSuoGyc@linutronix.de/
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
|
|
Increase time of holding HPD lane low by 50ms. This fixes EDID change not
detected by source/display side.
Fixes: 7b59b132ad43 ("media: platform: synopsys: Add support for HDMI input driver")
Cc: stable@vger.kernel.org
Reported-by: Ross Cawston <ross@r-sc.ca>
Closes: https://lore.kernel.org/linux-rockchip/20260209061654.54757-1-ross@r-sc.ca/
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Pull media updates from Mauro Carvalho Chehab:
- new CSI tegra support, covering Tegra20 and Tegra30
- new camera sensor drivers: T4ka3 and ov2732
- m88ds3103: add 3103c chip support
- uvcvideo: add support for Intel RealSense D436/D555 and P010 pixel format
- synopsys csi2rx: add i.MX93 support
- imx8-isi: add i.MX95 support
- imx8mq-mipi-csi2: add i.MX8ULP support
- dw100: add V4L2 requests support
- support for DTV devices from Hauppauge got some improvements
- media staging: dropped starfive-camss driver
- media docs: document multi-committers model and improve maint profile
- media core:
- add v4l2_subdev_get_frame_desc_passthrough() helper
- improve error handling in fwnode parsing
- lots of driver fixes, cleanups and improvements
* tag 'media/v7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (251 commits)
Revert "media: cx231xx: add USB ID 2040:8360 for Hauppauge WinTV-HVR-935"
media: synopsys: csi2rx: add i.MX93 support
media: dt-bindings: add NXP i.MX93 compatible string
media: synopsys: csi2rx: Use enum and u32 array for register offsets
media: synopsys: csi2rx: implement .get_frame_desc() callback
media: synopsys: csi2rx: only check errors from devm_clk_bulk_get_all()
media: synopsys: csi2rx: use devm_reset_control_get_optional_exclusive()
media: i2c: imx283: add support for non-continuous MIPI clock mode
media: i2c: ov08d10: add support for 24 MHz input clock
media: i2c: ov08d10: add support for reset and power management
media: i2c: ov08d10: add support for binding via device tree
dt-bindings: media: i2c: document Omnivision OV08D10 CMOS image sensor
media: i2c: ov08d10: add missing newline to prints
media: i2c: ov08d10: fix some typos in comments
media: i2c: ov08d10: remove duplicate register write
media: i2c: ov08d10: fix image vertical start setting
media: i2c: ov08d10: fix runtime PM handling in probe
staging: media: ipu7: Update TODO
media: Add t4ka3 camera sensor driver
media: i2c: Add ov2732 image sensor driver
...
|
|
The i.MX93 uses a newer version of the DW CSI-2 controller with a changed
register layout and an integrated Image Pixel Interface (IPI), which
converts the received CSI-2 packets from byte to pixel format and produces
a pixel data bus containing vertical and horizontal synchronization
information.
The reset flow also differs, so add the .assert_reset(), .deassert_reset(),
and .idi_enable() callbacks to support it.
Reviewed-by: Michael Riesch <michael.riesch@collabora.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[Sakari Ailus: include missing linux/bitfield.h.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Use enum dw_mipi_csi2rx_regs_index together with a u32 array to describe
register offsets. This allows supporting new IP versions with different
register layouts in a structured way.
Add rk3568_regs matching the previous macro definitions and pass it as
driver data during probe.
No functional change intended.
Reviewed-by: Michael Riesch <michael.riesch@collabora.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Implement the .get_frame_desc() callback to fetch information from the
remote endpoint.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Michael Riesch <michael.riesch@collabora.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
devm_clk_bulk_get_all() returns all clocks described in the DT, which are
already validated by the binding. Do not need enforce an expected clock
count.
Only check for error returns (< 0) to support more SoCs.
Reviewed-by: Michael Riesch <michael.riesch@collabora.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The DW MIPI CSI-2 RX is used on different SoCs, not all of which provide a
reset controller. Switch to devm_reset_control_get_optional_exclusive()
to support such platforms.
Reset presence and numbering are validated by the DT binding.
Reviewed-by: Michael Riesch <michael.riesch@collabora.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Fix "ERROR: modpost: "phy_mipi_dphy_get_default_config_for_hsclk"
[drivers/media/platform/synopsys/dw-mipi-csi2rx.ko] undefined!" by
selecting GENERIC_PHY_MIPI_DPHY in the Kconfig entry.
Fixes: 355a11004066 ("media: synopsys: add driver for the designware mipi csi-2 receiver")
Cc: stable@kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202602130253.BZnVd4jh-lkp@intel.com/
Signed-off-by: Michael Riesch <michael.riesch@collabora.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The out-of-bounds check for the format array is off by one. Fix the
check.
Fixes: 355a11004066 ("media: synopsys: add driver for the designware mipi csi-2 receiver")
Cc: stable@kernel.org
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Michael Riesch <michael.riesch@collabora.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The Synopsys DesignWare MIPI CSI-2 Receiver is currently only supported
on Rockchip RK3568 SoCs. Hence add a dependency on ARCH_ROCKCHIP, to
prevent asking the user about this driver when configuring a kernel
without Rockchip platform support.
The dependency can be relaxed later, when adding support for appropriate
SoCs from other vendors (if any).
Fixes: 355a110040665e43 ("media: synopsys: add driver for the designware mipi csi-2 receiver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Michael Riesch <michael.riesch@collabora.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The recent change in commit 20cf2aed89ac ("gpio: rockchip: mark the GPIO
controller as sleeping") to mark the rockchip GPIO driver as sleeping
has started triggering the warning at drivers/gpio/gpiolib.c:3523
indicating that a sleepable GPIO was called via the non-sleeping APIs on
the Rock 5B:
<4>[ 14.699308] Call trace:
<4>[ 14.699545] gpiod_get_value+0x90/0x98 (P)
<4>[ 14.699928] tx_5v_power_present+0x44/0xd0 [synopsys_hdmirx]
<4>[ 14.700446] hdmirx_delayed_work_hotplug+0x34/0x128 [synopsys_hdmirx]
<4>[ 14.701031] process_one_work+0x14c/0x28c
<4>[ 14.701405] worker_thread+0x184/0x300
<4>[ 14.701756] kthread+0x11c/0x128
<4>[ 14.702065] ret_from_fork+0x10/0x20
Currently the active use of the GPIO is all done from process context so
can be simply converted to use gpiod_get_value_cansleep(). There is one use
of the GPIO from hard interrupt context but this is only done so the status
can be displayed in a debug print so can simply be deleted without any
functional effect.
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The Synopsys DesignWare MIPI CSI-2 Receiver is a CSI-2 bridge with
one input port and one output port. It receives the data with the
help of an external MIPI PHY (C-PHY or D-PHY) and passes it to e.g.,
the Rockchip Video Capture (VICAP) block on recent Rockchip SoCs.
Add a V4L2 subdevice driver for this unit.
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Michael Riesch <michael.riesch@collabora.com>
[Sakari Ailus: Make sparse and smatch happy.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Downstream version of RK3588 U-Boot uses customized TF-A that remaps
HDMIRX hardware interrupt, routing it via firmware that isn't supported
by upstream driver.
Detect broken interrupt and print a clarifying error message about a need
to use open-source TF-A with this driver.
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
For ternary operators in the form of a ? true : false, if a itself returns
a boolean result, the ternary operator can be omitted. Remove redundant
ternary operators to clean up the code.
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Acked-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Pull media updates from Mauro Carvalho Chehab:
- Added a new V4L2 clock helper
- New camera sensor drivers
- iris: Enable H.264/H.265 encoder support and fixes in iris driver
common code
- camss: add support for new SoC flavors
- venus: add new SoC support
- tc358743: support more infoframe types
- Various fixes, driver improvements and cleanups
* tag 'media/v6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (439 commits)
media: venus: pm_helpers: add fallback for the opp-table
media: qcom: camss: vfe: Fix BPL alignment for QCM2290
media: tuner: xc5000: Fix use-after-free in xc5000_release
media: i2c: tc358743: Fix use-after-free bugs caused by orphan timer in probe
media: b2c2: Fix use-after-free causing by irq_check_work in flexcop_pci_remove
media: vsp1: Export missing vsp1_isp_free_buffer symbol
media: renesas: vsp1: Convert to SYSTEM_SLEEP/RUNTIME_PM_OPS()
media: renesas: ceu: Convert to RUNTIME_PM_OPS()
media: renesas: fdp1: Convert to RUNTIME_PM_OPS()
media: renesas: rcar-vin: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
media: renesas: rcar_drif: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
media: uvcvideo: Mark invalid entities with id UVC_INVALID_ENTITY_ID
media: uvcvideo: Support UVC_CROSXU_CONTROL_IQ_PROFILE
media: uvcvideo: Run uvc_ctrl_init_ctrl for all controls
media: uvcvideo: Shorten the transfer size non compliance message
media: uvcvideo: Do not re-reference dev->udev
media: uvcvideo: Use intf instead of udev for printks
media: uvcvideo: Move video_device under video_queue
media: uvcvideo: Drop stream->mutex
media: uvcvideo: Move MSXU_CONTROL_METADATA definition to header
...
|
|
The era of hand-rolled HIWORD_UPDATE macros is over, at least for those
drivers that use constant masks.
Replace the UPDATE macro with bitfield.h's FIELD_PREP, to give us
additional error checking.
Also, replace the HIWORD_UPDATE macro at the same time with the new
FIELD_PREP_WM16 macro in hw_bitfield.h, which also gives us additional
error checking.
The UPDATE/HIWORD_UPDATE macros are left as wrappers around the
replacement macros, in order to not rock the boat too much, and keep the
changes easy to review.
Yury: drop extra parens around FIELD_PREPs (Dmitry)
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Acked-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
|
|
The second argument to the ioctl handlers is not a file handle any more.
The standard practice is to name it 'void *priv' in drivers. Many
drivers still name it 'void *fh', and a few use more exotic names.
Replace those more exotic names with 'void *priv' in all media drivers.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Jai Luthra <jai.luthra@linux.dev>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Pull media updates from Mauro Carvalho Chehab:
- v4l2-core fix: V4L2_BUF_TYPE_VIDEO_OVERLAY is capture, not output
- New driver: Amlogic C3 ISP
- New sensor drivers: ST VD55G1 and VD56G3, OmniVision OV02C10
- amlogic: c3-mipi-csi2: Handle 64-bits division
- a fix for 64-bits division at the amlogic c3-mipi-csi2 driver
- Changes at atomisp to support mainline mt9m114 driver and remove
deprecated GPIO APIs
- various cleanups, fixes and enhancements
* tag 'media/v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (314 commits)
media: rkvdec: h264: Support High 10 and 4:2:2 profiles
media: rkvdec: Add get_image_fmt ops
media: rkvdec: Initialize the m2m context before the controls
media: rkvdec: h264: Limit minimum profile to constrained baseline
media: mediatek: jpeg: support 34bits
media: verisilicon: Free post processor buffers on error
media: platform: mtk-mdp3: Remove unused mdp_get_plat_device
media: amlogic: c3-mipi-csi2: Handle 64-bits division
media: uvcvideo: Use dev_err_probe for devm_gpiod_get_optional
media: uvcvideo: Fix deferred probing error
media: uvcvideo: Rollback non processed entities on error
media: uvcvideo: Send control events for partial succeeds
media: uvcvideo: Return the number of processed controls
media: uvcvideo: Do not turn on the camera for some ioctls
media: uvcvideo: Make power management granular
media: uvcvideo: Increase/decrease the PM counter per IOCTL
media: uvcvideo: Create uvc_pm_(get|put) functions
media: uvcvideo: Keep streaming state in the file handle
Documentation: media: Add documentation file c3-isp.rst
Documentation: media: Add documentation file metafmt-c3-isp.rst
...
|
|
The sequence number communicate the lost frames to userspace. For this
reason, it must be incremented even when a frame is skipped. This allows
userspace such as GStreamer to report the loss.
Fixes: 7b59b132ad439 ("media: platform: synopsys: Add support for HDMI input driver")
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
This variable is used to fill the v4l2_buffer.sequence, let's name it
the exact same way to reduce confusion.
No functional changes.
Fixes: 7b59b132ad439 ("media: platform: synopsys: Add support for HDMI input driver")
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
For now, the Synopsys HDMI HDMI RX Controller is only supported on
Rockchip RK3588 SoCs. Hence add a dependency on ARCH_ROCKCHIP, to
prevent asking the user about this driver when configuring a kernel
without Rockchip SoC support.
Fixes: 7b59b132ad4398f9 ("media: platform: synopsys: Add support for HDMI input driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Shreeya Patel <shreeya.patel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
The num_clks is set this way:
hdmirx_dev->num_clks = devm_clk_bulk_get_all(dev, &hdmirx_dev->clks);
if (hdmirx_dev->num_clks < 1)
return -ENODEV;
The devm_clk_bulk_get_all() function returns negative error codes so the
hdmirx_dev->num_cks variable needs to be signed for the error handling to
work.
Fixes: 7b59b132ad43 ("media: platform: synopsys: Add support for HDMI input driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
The build fails for 32-bit targets with:
arm-linux-gnueabi-ld: drivers/media/platform/synopsys/hdmirx/snps_hdmirx.o: in function `hdmirx_get_timings':
snps_hdmirx.c:(.text.hdmirx_get_timings+0x46c): undefined reference to `__aeabi_uldivmod'
bt->pixelclock is __u64, which causes the compiler to emit a libcall for
64-bit division. Use the optimized kernel helper, div_u64(), to resolve
this.
Fixes: 7b59b132ad43 ("media: platform: synopsys: Add support for HDMI input driver")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Move cached EDID that takes 512 bytes to the bottom of struct
snps_hdmirx_dev to improve CPU's cache locality of the struct.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
HDMI audio CODEC is unsupported in the current version of the driver.
Support may come later. Remove HDMI CODEC bits that were left out
by accident to keep code consistent.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Remove second v4l2-common.h header inclusion.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202503061231.PHF6hEL2-lkp@intel.com/
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Add initial support for the Synopsys DesignWare HDMI RX
Controller Driver used by Rockchip RK3588. The driver
supports:
- HDMI 1.4b and 2.0 modes (HDMI 4k@60Hz)
- RGB888, YUV422, YUV444 and YCC420 pixel formats
- CEC
- EDID configuration
The hardware also has Audio and HDCP capabilities, but these are
not yet supported by the driver.
Co-developed-by: Dingxian Wen <shawn.wen@rock-chips.com>
Signed-off-by: Dingxian Wen <shawn.wen@rock-chips.com>
Signed-off-by: Shreeya Patel <shreeya.patel@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
Linus Torvalds
Guoniu Zhou
Marco Crivellari
Dmitry Osipenko
Frank Li
Michael Riesch
Geert Uytterhoeven
Mark Brown
Liao Yuanhong
Nicolas Frattaroli
Laurent Pinchart
Nicolas Dufresne
Dan Carpenter
Nathan Chancellor
Shreeya Patel