| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull PCI fixes from Bjorn Helgaas:
- Make BAR resize work even for devices where no upstream bridge is
visible to the OS, which fixes an amdgpu regression on SolidRun
HoneyComb, which doesn't expose Root Ports to the OS (Liz Fong-Jones)
- Omit bus properties in dynamic OF nodes when a bridge has no
subordinate bus, which fixes early boot hangs caused by NULL pointer
dereferences with CONFIG_PCI_DYNAMIC_OF_NODES enabled (Angel J)
- Disable enhanced atomics on AMD NBIO 7.7 and 7.11 to avoid silent
data corruption on 64-bit DMAs (Mario Limonciello)
* tag 'pci-v7.3-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
x86/PCI: Disable enhanced atomics on AMD NBIO 7.7 and 7.11
PCI: of_property: Omit bus properties without a subordinate bus
PCI: Fix BAR resize for devices on a root bus
|
|
A bridge (a device with a Type 1 header) may not have a secondary bus
allocated (pdev->subordinate), e.g., if there are no available bus numbers
or the bridge secondary/subordinate bus numbers are not writable.
The dynamic OF helpers of_pci_prop_bus_range() and of_pci_prop_intr_map()
dereference pdev->subordinate without checking it. When
CONFIG_PCI_DYNAMIC_OF_NODES is enabled, this can cause a NULL pointer
dereference and early boot hang.
Generate 'bus-range' and 'interrupt-map' properties only when a subordinate
bus exists. Keep the node and its remaining properties for bridges without
one.
The problem was latent since 407d1a51921e ("PCI: Create device tree node
for bridge"), but wasn't reachable until 1f340724419e ("PCI: of: Create
device tree PCI host bridge node"), which appeared in v6.15. Before
1f340724419e, of_pci_make_dev_node() returned early because the parent OF
node was missing.
Fixes: 407d1a51921e ("PCI: Create device tree node for bridge")
Signed-off-by: Angel J <iamanaws@httpd.dev>
[bhelgaas: move pdev->subordinate test to callees, commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v6.6+
Link: https://patch.msgid.link/20260918195540.GA1187209@bhelgaas
|
|
pci_do_resource_release_and_resize() releases device BARs that share a
bridge window with the BAR being resized, but when the device sits directly
on a root bus (pdev->bus->self == NULL) it then skips resource assignment
entirely and returns success, leaving the BARs it just released unassigned
(IORESOURCE_UNSET).
Skipping pbus_reassign_bridge_resources() is correct in that case -- there
is no bridge window to adjust -- but the device BARs still have to be
reassigned. Before the BAR release was consolidated into the PCI core, this
case worked for amdgpu because the driver released the BARs itself and then
called pci_assign_unassigned_bus_resources() unconditionally after the
resize, which assigns unassigned device BARs also on a root bus. Commit
db92e3fef53e ("drm/amdgpu: Remove driver side BAR release before resize")
removed that call, so nothing assigns the released BARs anymore.
This breaks amdgpu completely on the SolidRun HoneyComb LX2K (NXP LX2160A,
arm64, ACPI), where ACPI doesn't expose the Root Port so the GPU endpoint
appears directly on a "root bus" of its segment:
amdgpu 0004:01:00.0: BAR 0 [mem 0xa400000000-0xa40fffffff 64bit pref]: releasing
amdgpu 0004:01:00.0: BAR 2 [mem 0xa410000000-0xa4101fffff 64bit pref]: releasing
amdgpu 0004:01:00.0: sw_init of IP block <gmc_v8_0> failed -19
amdgpu 0004:01:00.0: amdgpu_device_ip_init failed
amdgpu 0004:01:00.0: Fatal error during GPU init
No error is logged because the resize path reports success; amdgpu then
finds BAR 0 IORESOURCE_UNSET and bails out with -ENODEV.
When there is no upstream bridge, call pci_bus_assign_resources() on the
root bus to place the BARs released above, using the same alignment-sorted
algorithm as normal enumeration instead of a manual per-BAR loop. This also
walks the rest of the hierarchy under the root bus, as
pci_assign_unassigned_bus_resources() used to for amdgpu before commit
db92e3fef53e ("drm/amdgpu: Remove driver side BAR release before resize")
removed that call -- the core-side fix that commit asked for ("such a
problem should be fixed inside pci_resize_resource() instead").
pci_bus_assign_resources() returns void, so failure is detected by checking
whether the released BARs are still assigned afterward; if not, roll back
as in the bridged case. This is stricter than the bridged path -- it fails
on any unplaced resource, not just required ones -- since a root bus
typically has one shared window, and failing loudly seemed better than
leaving something silently unassigned.
The root bus path also had a locking bug that any fix here necessarily
touches: the old "goto out" jumped to up_read(&pci_bus_sem) without a
matching down_read() (as does the "goto restore" taken when
pci_dev_res_add_to_list() fails in the release loop). Take pci_bus_sem
before the BAR release loop so every path through the function holds it
exactly once.
Fixes: 337b1b566db0 ("PCI: Fix restoring BARs on BAR resize rollback path")
Link: https://bugs.launchpad.net/ubuntu/+source/linux-hwe-7.0/+bug/2159596
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Assisted-by: Claude:claude-fable-5 checkpatch
Assisted-by: Claude:claude-sonnet-5
Signed-off-by: Liz Fong-Jones <lizf@honeycomb.io>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260918035633.566823-1-lizf@honeycomb.io
|
|
Pull PCI fix from Bjorn Helgaas:
- Enable clock after core reset is asserted to fix enumeration
regression on i.MX6Q Apalis platforms with ASM1061/ASM1062 SATA
controllers (Richard Zhu)
* tag 'pci-v7.3-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: imx6: Move clock enable after core reset assertion
|
|
Commit 610fa91d9863 ("PCI: imx6: Assert PERST# before enabling regulators")
inadvertently moved clock enablement before core reset assertion, breaking
PCI device initialization on i.MX6Q Apalis platforms with
ASM1061/ASM1062 SATA controllers connected:
imx6q-pcie 1ffc000.pcie: host bridge /soc/pcie@1ffc000 ranges:
imx6q-pcie 1ffc000.pcie: IO 0x0001f80000..0x0001f8ffff -> 0x0000000000
imx6q-pcie 1ffc000.pcie: MEM 0x0001000000..0x0001efffff -> 0x0001000000
imx6q-pcie 1ffc000.pcie: config reg[1] 0x01f00000 == cpu 0x01f00000
imx6q-pcie 1ffc000.pcie: iATU: unroll F, 4 ob, 4 ib, align 64K, limit 4G
imx6q-pcie 1ffc000.pcie: Link: Only Gen1 is enabled
imx6q-pcie 1ffc000.pcie: Link failed to come up. LTSSM: POLL_CONFIG
imx6q-pcie 1ffc000.pcie: probe with driver imx6q-pcie failed with error -110
NOTE: It is not 100% clear if the issue is specific to the ASM1061/ASM1062
device or on the specific power-up sequence (reset vs cold-power-on).
To fix this regression, restore the original sequence where clocks are
enabled after asserting core reset and configuring the controller type.
Fixes: 610fa91d9863 ("PCI: imx6: Assert PERST# before enabling regulators")
Reported-by: Leonardo Costa <leoreis.costa@gmail.com>
Closes: https://lore.kernel.org/all/bl7i3obu2clzsgeoct2a4mtfhv6typcjdqmgneropf3hpgwve6@n2m5uhlduw57/T/#u
Reported-by: Franz Schnyder <fra.schnyder@gmail.com>
Closes: https://lore.kernel.org/all/t65y5d54axtksbfs7r4olcefqhwm6m4dz3njgnrnf7fcotj74i@o7avoznlafbj/
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
[bhelgaas: move to pci/for-linus for v7.3]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # 7.2+
Link: https://patch.msgid.link/20260813095003.356062-1-hongxing.zhu@oss.nxp.com
|
|
This is another run of the Coccinelle script for converting kmalloc()
family of allocations to kmalloc_obj() via the existing rules in
scripts/coccinelle/api/kmalloc_objs.cocci
This catches both the set of kmalloc() uses added since the first
kmalloc_obj() conversions in v7.0 and adds a large group missed in the
first pass due to Coccinelle not interacting well with the cleanup.h
scoped_...() family of macros[1]. I worked around this with spatch's
"--macro-file" argument to a file with all the scoped_...() macros mapped
to Coccinelle's YACFE_ITERATOR[2] as that was the closest viable control
flow indicator I could find.
Build tested allmodconfig on x86, arm64, arm, loongarch, mips, powerpc,
riscv, and s390 with no new warnings.
Link: https://lore.kernel.org/lkml/202609021314.8A9C0B8@keescook/ [1]
Link: https://github.com/coccinelle/coccinelle/blob/master/standard.h [2]
Signed-off-by: Kees Cook <kees+treewide@kernel.org>
|
|
Pull hyperv updates from Wei Liu:
- Decrypt netvsc buffer on contiguous direct-map addresses (Kameron
Carr)
- Drop WS2012/2012R2 & Win8/8.1 Hyper-V support (Michael Kelley)
- Use more meaningful errnos for hypercall status code (Hardik Garg)
- Fix lost interrupts on CPU hot-unplug for Hyper-V PCI/MSI (Naman
Jain)
- Reserve more MSHV vectors for Linux root partition (Wei Liu)
* tag 'hyperv-next-signed-20260826' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
clocksource: hyper-v: Remove support for stimer interrupts in message mode
scsi: storvsc: Remove support for storvsc protocol of old Hyper-V hosts
hv_netvsc: Remove GPADL teardown special case for old Hyper-V hosts
hv_sock: Remove check for old Hyper-V hosts
Drivers: hv: Remove support for WS2012/2012R2 & Win8/8.1 version of Hyper-V
hv_netvsc: Allocate send/receive buffers using vmbus_alloc_buffer()
Drivers: hv: vmbus: Add vmbus_alloc_buffer()/vmbus_free_buffer() for CoCo VMs
Drivers: hv: vmbus: add vmbus_establish_gpadl_caller_decrypted()
Drivers: hv: vmbus: Skip VMBus module cleanup for non-nested root partition
x86/hyperv: reserve more vectors
PCI: hv: Set irq_retrigger callback for the Hyper-V PCI MSI irqchip
Drivers: hv: Use meaningful errnos for hypercall status codes
|
|
Pull another power sequencing update from Bartosz Golaszewski:
"A single tree-wide rename of two of the public functions to better
reflect their actual semantics:
- rename pwrseq_power_on/off() to pwrseq_enable/disable() tree-wide"
* tag 'pwrseq-updates-for-v7.3-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
power: sequencing: rename pwrseq_power_on/off() to pwrseq_enable/disable()
|
|
The way power sequencing works means that a call to pwrseq_power_on()
does not necessarily result in the pwrseq target being powered-on at
that time: it may have already been powered on before. Similarly: a call
to pwrseq_power_off() does not have to result in an actual powering off
of resources: there may still be other users that requested a power-on
before.
We will also introduce the concept of "non-controllable" pwrseq targets
soon which further increases the disconnect between the naming
convention and the actual semantics.
What consumers of pwrseq descriptors actually do is: they *vote* for a
powering on of a given target or retract that vote. These operations
could be called get/put in line with runtime PM but this could become
confusing since we already provide pwrseq_get/put() for a different
purpose. pwrseq_vote_on/off() also have been rejected as unusual in
the tree.
Change the name of the two functions to pwrseq_enable/disable() which
better reflects their purpose and semantics and also mirrors other
enable-counted resources like regulators and clocks. No functional change
intended.
If at any point users need to know *when* the exact power event happens,
we can provide that information in the form of a notifier.
Acked-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Acked-by: Alessio Belle <alessio.belle@imgtec.com> # imagination
Link: https://patch.msgid.link/20260731-pwrseq-vote-rename-v3-1-44e60b8be053@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
Pull char/misc/IIO/etc driver updates from Greg KH:
"Here is the big set of char, misc, iio, counter, fpga, and other small
driver subsystems for 7.3-rc1.
Overall, due to some driver removals we only added a bit more code
than removed, which was a nice change. Highlights in this merge
request are:
- Loads of IIO driver updates and additions
- binder driver updates (more on that below...)
- Removal of the SGI XP and GRU drivers as they are not used anymore
and turn out to be pretty insecure overall
- Removal of the obsolete ibmasm driver as it's not being used
anymore
- Coresight driver updates and additions
- Mei driver udpates
- Counter driver updates
- FPGA driver updates
- ICC driver updates
- lots and lots of other tiny driver updates to resolve reported
issues
All of these have been in linux-next for a while"
* tag 'char-misc-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (513 commits)
iio: chemical: atlas-sensor: use iio_trigger_poll_nested() to fix remove UAF
iio: adc: pac1921: fix wrong channel used in trigger handler read
iio: light: gp2ap002: re-enable irq if runtime suspend fails
iio: light: gp2ap002: Fix unbalanced runtime PM on repeated event writes
iio: light: apds9306: fix PM reference leak in apds9306_read_data()
iio: gyro: mpu3050: fix sign of raw angular velocity readings
iio: srf04: fix pm_runtime handling on probe error path
iio: adc: ad4080: configure backend data size
iio: adc: adi-axi-adc: add data size support for AD408X backend
iio: chemical: atlas-sensor: fix PM reference leak in buffer postenable
iio: dac: ad5446: fix OF module device table
iio: light: opt4001: Fix reversed GENMASK() arguments in fault count mask
iio: light: opt4001: Reject integration times with a non-zero seconds part
iio: light: opt4001: Fix incompatible pointer type passed to div_u64_rem()
iio: light: opt4001: Fix power down clearing bits of the wrong register
iio: light: opt4060: Fix incorrect register name in threshold read error message
iio: light: opt4060: Fix pointer type passed to div_u64_rem()
iio: light: opt4060: Reject integration times with a non-zero seconds part
iio: light: ltrf216a: fix runtime PM reference leak in error path
iio: pressure: dps310: fix NULL pointer dereference on ACPI probe
...
|
|
Pull dmaengine updates from Vinod Koul:
"Core:
- New API to combine configuration and preparation and users
New hardware support:
- Mediatek MT8189 SoC uart dma support
Updates:
- Designware dma driver flatten desc structures and simplify code,
interrupt-path groundwork changes, first part of PCI EP DMA support
- Updates to zynqmp_dma with runtime PM and device removal
improvments
- Xilinx dma optimizations for AXIDMA and MCDMA channel management"
* tag 'dmaengine-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (73 commits)
dmaengine: dw-edma: Mark emulated IRQ as level-triggered
dmaengine: idxd: assign all engines to group 0 in IAA defaults
dmaengine: qcom_hidma: remove conditional return with no effect
dmaengine: qcom-bam-dma: fix autosuspend cleanup during removal
dmaengine: fsl-edma: tracing: no ptr dereference during log output
dmaengine: dw-edma: Program endpoint function numbers
dmaengine: dw-edma-pcie: Add chip flags to match data
dmaengine: dw-edma-pcie: Handle optional data blocks
dmaengine: dw-edma-pcie: Factor out descriptor block address lookup
dmaengine: dw-edma-pcie: Add register offset match flag
dmaengine: dw-edma-pcie: Add platform ops to match data
dmaengine: dw-edma-pcie: Rename vsec_data to dma_data
dmaengine: dw-edma-pcie: Add capability match data
dmaengine: dw-edma-pcie: Track non-LL mode in DMA data
dmaengine: dw-edma: Add partial channel ownership mode
dmaengine: dw-edma: Initialize IRQ data before requesting IRQs
dmaengine: dw-edma: Add core quiesce operations
dmaengine: dw-edma: Add per-channel interrupt routing control
dmaengine: dw-edma: Factor out HDMA interrupt setup helper
dmaengine: dw-edma: Defer channel IRQ handling to workqueue
...
|
|
The Hyper-V vPCI MSI irqchip never installs an irq_retrigger() callback.
On CPU hot-unplug fixup_irqs() migrates the interrupts which are affine to
the outgoing CPU to a new target. If an interrupt still has its pending bit
set in the outgoing CPU's IRR at that point, fixup_irqs() resends it on the
new target through the irqchip's irq_retrigger() callback. As the Hyper-V
PCI/MSI chip does not provide that callback, the pending interrupt is
silently dropped, which can result in lost interrupts, stalls and "No irq
handler for vector" messages during CPU hotplug.
Install irq_chip_retrigger_hierarchy() as the irq_retrigger() callback for
the Hyper-V PCI/MSI irqchip, so that a pending interrupt is resent on its
new target CPU via the parent x86 vector domain.
Fixes: 4daace0d8ce85 ("PCI: hv: Add paravirtual PCI front-end for Microsoft Hyper-V VMs")
Cc: stable@vger.kernel.org
Suggested-by: Long Li <longli@microsoft.com>
Suggested-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Aditya Garg <gargaditya@linux.microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Signed-off-by: Naman Jain <namjain@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Pull PCI updates from Bjorn Helgaas:
"Resource management:
- Add hotplug reservation only once (not at each level of the
hierarchy) so bridge windows don't grow more than necessary (Ilpo
Järvinen)
Driver binding:
- Rework device matching so device ID lifetime only needs to cover
the probe path since dynamic IDs can be removed at any time (Gary
Guo)
Error handling:
- Update mappings of AER errors to agent & layer and log them for
each individual error when multiple errors detected (Lukas Wunner)
- Log Error Source only once, not twice in separate messages (Lukas
Wunner)
- Emit TLP Log only for unmasked errors (Lukas Wunner)
- Support Advisory Non-Fatal Errors (Lukas Wunner)
- Allow DPC on all Downstream Ports, not just Root Ports, when OS
controls AER (Darshit Shah)
ASPM:
- Program the same ASPM Control values for every function of
multi-function devices, as recommended by the PCIe spec (Krishna
Chaitanya Chundru)
- Avoid L0s for Realtek RTS525A, where it causes an AER interrupt
storm (Max Lee)
- Avoid ASPM L0s, L1, and L1 PM Substates based on 'aspm-no-l0s',
'aspm-no-l1' [1], and 'aspm-no-l1ss' DT properties (Krishna
Chaitanya Chundru)
Power management:
- Allow D3 for native hotplug-capable Root Ports on non-x86 platforms
(we avoid D3 for these ports on x86 because some old platforms
didn't validate it) (Manivannan Sadhasivam)
- Allow portdrv to claim Ports even if they don't support services
(AER, PME, DPC, hotplug, etc) so it can do power management (Brian
Norris)
Power control:
- Add support for PCIe WAKE# interrupt when described via DT (Krishna
Chaitanya Chundru)
- For the TC9563 PCIe switch:
- Take a reference on the I2C adapter to avoid uninterruptible
hang when unloading an I2C module while in-use (Johan Hovold)
- Update DT binding and driver to restrict Tx Amplitude, DFE and
N_FTS to USP, DSP1 and DSP2 (Manivannan Sadhasivam)
- Power off only external-facing ports (DSP1, DSP2), leaving USP
and DSP3 (aka VDSP) powered up (Manivannan Sadhasivam)
- Move integrated MAC Endpoint out of the list of internal ports
and configure it separately (Manivannan Sadhasivam)
Virtualization:
- Add ACS quirk for Pericom PI7C9X2G608 switches (Tim Harvey)
- Fix a long-standing bug in the Intel PCH Root Port MPC ACS quirk
that didn't update the intended INTEL_MPC_REG_IRBNCE bit because it
used a 16-bit config write when a 32-bit write was intended
(Mohamad Raizudeen)
Procfs:
- Avoid spurious runtime PM wakeup on config space accesses that are
outside config space and fail before reaching PCI (Krzysztof
Wilczyński)
- Warn on user-space writes to kernel-exclusive config space regions,
as we already do for sysfs (Krzysztof Wilczyński)
- Check credentials of opener, not reader, for config space reads, as
we already do for sysfs (Krzysztof Wilczyński)
Sysfs:
- In pci_write_legacy_io(), avoid out-of-bounds reads from the user
buffer and fix incorrect ioport write data (1-byte writes on
little-endian powerpc, 2- and 4-byte writes on big-endian powerpc)
(Krzysztof Wilczyński)
- In pci_read_legacy_io(), fix incorrect ioport read data for 2- and
4-byte reads on big-endian powerpc (Krzysztof Wilczyński)
- Fix I/O port accessor argument order in Alpha pci_legacy_write()
(Krzysztof Wilczyński)
- Avoid spurious runtime PM wakeup on config space accesses that are
outside config space and fail before reaching PCI (Krzysztof
Wilczyński)
- Return -EINVAL, not -ENODEV, for mmap of I/O BAR that fails because
the arch doesn't support it, as we do for procfs (Krzysztof
Wilczyński)
- Check for LOCKDOWN_PCI_ACCESS for legacy_io and legacy_mem, as we
do for other config space accessors (Krzysztof Wilczyński)
Peer-to-peer DMA:
- Add Nvidia Vera Rubin to list of platforms that support P2PDMA
(Leon Romanovsky)
Endpoint framework:
- Check doorbell SUCCESS bit in pci_endpoint_test to avoid treating
some failures as successes (Niklas Cassel)
- Fail doorbell test when the trigger IRQ is missed (Niklas Cassel)
New native PCIe controller drivers:
- Add DT binding and driver for NVIDIA Tegra264 (Thierry Reding)
Native PCIe controllers:
- Use common wait time definitions for PCIe link monitoring instead
of defining driver-private duplicates (Thierry Reding)
Generic host bridge driver:
- Fix NULL pointer dereference that caused enumeration failures on
32-bit CAM systems (Steffen Persvold)
Amlogic Meson PCIe controller driver:
- Correct the PERST# GPIO state so it remains asserted until power
and REFCLK become stable to fix enumeration failure (Ronald
Claveau)
ASPEED PCIe controller driver:
- Switch to irq_domain_create_linear() so we can obsolete
irq_domain_add_linear() (Jiri Slaby)
Cadence PCIe controller driver:
- Add MODULE_DEVICE_TABLE to generate module aliases for OF-based
module autoloading (Pengpeng Hou)
- Add debugfs 'ltssm_status' file for LGA- and HPA-based Cadence
controllers (Hans Zhang)
- Support up to x4 (not x2) lanes for J200 (Takuma Fujiwara)
- Fix host/endpoint dependencies for cadence-plat driver to fix link
error when cadence-plat is built-in but the host or endpoint driver
is modular (Aksh Garg)
Freescale i.MX6 PCIe controller driver:
- Add imx6 intr/aer/pme interrupt lines for i.MX95 (Richard Zhu)
- Remove PERST# checking from pci_host_common_parse_port() so callers
can decide whether to fall back to legacy DT binding with PERST# in
the host bridge (Sherry Sun)
- Fix build issues when PCI_PWRCTRL_GENERIC or PCI_HOST_COMMON is a
module (Arnd Bergmann)
- Create pwrctrl devices only once by doing it from imx_pcie_probe()
instead of imx_pcie_host_init(), which is used during both probe
and resume (Sherry Sun)
- Use 'dw_pcie_rp->skip_pwrctrl_off' to avoid powering off devices
during suspend to preserve wakeup capability (Sherry Sun)
- Add runtime PM support for i.MX95 to allow dynamic power management
when the link is idle (Richard Zhu)
Intel VMD host bridge driver:
- Support device ID 0x28C1 and assume that BIOS has already
enumerated the hierarchy below VMD and stored bus range info for OS
to use (Nirmal Patel)
- Add support for VMCONFIG BUS_RESTRICT_CFG=3, which makes it
possible to enumerate downstream devices on Intel Arrow Lake-HX
systems and probably others (Ali Alaei)
- Pay attention to _OSC negotiation for VMD hierarchy only when
running on bare metal, not when running in a VM (Nirmal Patel)
- Add Nova Lake (NVL) and Dunlow (DNL) Device IDs (Szymon Durawa)
MediaTek PCIe controller driver:
- Add support for PCIe controller in EcoNet EN7528 and EN751221 SoCs
(Caleb James DeLisle)
MediaTek PCIe Gen3 controller driver:
- Add mediatek-gen3 'memory-region' for restricted DMA buffer
(Chen-Yu Tsai)
NVIDIA Tegra264 PCIe controller driver:
- Distinguish Tegra264 C0 PCIe controller for internal GPU from C1-C5
controllers so the unit address matches the first 'reg' entry
(Thierry Reding)
- Add Tegra264 Root Port stanzas to prepare for generic WAKE#
handling (Thierry Reding)
Qualcomm PCIe controller driver:
- Add IPQ9650 compatible with global interrupt (Kathiravan
Thirumoorthy)
- Add IPQ5210 compatible with IPQ9574 fallback (Varadarajan
Narayanan)
- Add DT binding and driver support for Hawi SoC (Matthew Leung)
- Skip PERST# GPIOs provided by downstream PCIe devices, which should
be handled by drivers of those devices (Manivannan Sadhasivam)
- Stop advertising Attention Button Present (no Qcom SoCs support
Attention Buttons) so pciehp can use Presence Detect Changed events
(Qiang Yu)
Renesas R-Car PCIe controller driver:
- Add rcar-gen4-pci-host optional 'msi-parent' for GIT ITS (Marek
Vasut)
- When MSI is enabled but iMSI-RX is not used, configure AXIINTC to
allow GIT ITS to handle MSI (Marek Vasut)
- Refactor GIC600 implementation to make it easier to add platforms
that only support 32-bit addressing (Marek Vasut)
- Add Renesas R-Car Gen4 S4/V4H/V4M to the list of GIC600
integrations that only support 32-bit addressing (Marek Vasut)
Renesas RZ/G3S PCIe controller driver:
- Add DT binding and driver support for RZ/V2H(P) SoC, which contains
two PCIe controllers, configured either as a single x4 link or two
independent x2 link controllers (Lad Prabhakar)
SpacemiT K1 PCIe controller driver:
- Add missing MODULE_DEVICE_TABLE() to generate module alias info for
OF-based module autoloading (Pengpeng Hou)
StarFive PCIe controller driver:
- Fix resource leaks on error paths in host_init() (Ali Tariq)
- Fix runtime PM handling and teardown ordering to avoid register
access while power or clocks are disabled (Ali Tariq)
- Check for runtime PM resume failure to avoid register access while
power or clocks are disabled (Ali Tariq)
Synopsys DesignWare PCIe controller driver:
- Add LECARC PMU IDs to the DWC RAS/DES VSEC list so it can take
advantage of the existing debugfs support for silicon debug, error
injection, and event counters (Brett Zhou)
- Factor pcie_valid_speed() and pci_bus_speed2lnkctl2() out of bwctrl
so they can be shared by the DWC core (Hans Zhang)
- Flush MSI writes from endpoint before unmapping the iATU, as we
already do for MSI-X writes (Niklas Cassel)
- Unmap MSI iATU window before mapping MSI-X window, to avoid a
subsequent MSI write using a disabled aperture and losing the
interrupt (Niklas Cassel)
- Change endpoint .pre_init() and .init() callbacks to return errors
and handle them (Marek Vasut)
UltraRISC PCIe controller driver:
- Add 'core', 'dbi', and 'aux' clocks to DT binding and manage them
in the driver (Jia Wang)
- Use module_platform_driver() since this may be built as a module,
though not removable because IRQs can't be safely disposed (Jia
Wang)
MicroSemi Switchtec management driver:
- Add Microchip PCI1008 device ID and include it in NTB DMA alias
quirk (Logan Gunthorpe)
Miscellaneous:
- Document how to write PCI Host Controller drivers (Manivannan
Sadhasivam)
- Fix typos in documentation (D'Orus Tsitera)
- Use %pe format specifier to print error pointers so we get symbolic
errname when available (Krzysztof Wilczyński)"
* tag 'pci-v7.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (124 commits)
PCI: vmd: Add Nova Lake (NVL) and Dunlow (DNL) Device IDs
PCI: tegra264: Add Tegra264 support
dt-bindings: PCI: tegra264: Switch to PCIe Root Port bindings
dt-bindings: PCI: tegra264: Strictly distinguish C0 from C1-C5
PCI/AER: Support Advisory Non-Fatal Errors
PCI: Fix 32-bit config write in Intel PCH Root Port MPC ACS quirk
PCI: dwc: Handle return value from endpoint .pre_init callback
PCI: dwc: Handle return value from endpoint .init callback
PCI: dwc: Add PCI ID for LECARC PCIe PMU
PCI/ASPM: Mask ASPM states based on Devicetree properties
PCI/ASPM: Disable/restore ASPM on every function for multi-function devices
Documentation: PCI: Document how to write PCI Host Controller drivers
PCI/ASPM: Use pcie_capability_clear_and_set_word() for ASPM disable/restore
PCI: Add support for PCIe WAKE# interrupt
PCI: Allow D3 for native hotplug-capable Root Ports on non-x86 platforms
dt-bindings: PCI: Correct white-space style
PCI/ASPM: Avoid L0s for Realtek RTS525A
PCI: ultrarisc: Use module_platform_driver()
PCI: ultrarisc: Get and enable DP1000 PCIe controller clocks
dt-bindings: PCI: ultrarisc: Add required DP1000 PCIe clocks
...
|
|
- Fix typos in documentation (D'Orus Tsitera)
- Use %pe format specifier to print error pointers so we get symbolic
errname when available (Krzysztof Wilczyński)
* pci/misc:
PCI: Use %pe format specifier to print error pointers
Documentation: PCI: Fix sysfs-bus-pci typo
|
|
- Use common wait time definitions for PCIe link monitoring instead of
defining driver-private duplicates (Thierry Reding)
- Add LECARC PMU IDs to the DWC RAS/DES VSEC list so it can take advantage
of the existing debugfs support for silicon debug, error injection, and
event counters (Brett Zhou)
* pci/controller/misc:
PCI: dwc: Add PCI ID for LECARC PCIe PMU
PCI: Use standard wait times for PCIe link monitoring
|
|
- Drop unnecessary OF node reference (Yuho Choi)
* pci/controller/xgene:
PCI: xgene: Drop unnecessary OF node reference
|
|
- Support device ID 0x28C1 and assume that BIOS has already enumerated the
hierarchy below VMD and stored bus range info for OS to use (Nirmal
Patel)
- Add support for VMCONFIG BUS_RESTRICT_CFG=3, which makes it possible to
enumerate downstream devices on Intel Arrow Lake-HX systems and probably
others (Ali Alaei)
- Observe _OSC negotiation for VMD hierarchy only when running on bare
metal, not when running in a VM (Nirmal Patel)
- Add Nova Lake (NVL) and Dunlow (DNL) Device IDs (Szymon Durawa)
* pci/controller/vmd:
PCI: vmd: Add Nova Lake (NVL) and Dunlow (DNL) Device IDs
PCI: vmd: Only copy root bridge _OSC control flags in bare metal OS
PCI: vmd: Handle BUS_RESTRICT_CFG value 3 for Arrow Lake-HX
PCI: vmd: Add feature to scan BIOS-enumerated devices
|
|
- Distinguish Tegra264 C0 PCIe controller for internal GPU from C1-C5
controllers so the unit address matches the first 'reg' entry (Thierry
Reding)
- Add Tegra264 Root Port stanzas to prepare for generic WAKE# handling
(Thierry Reding)
- Add NVIDIA Tegra264 driver (Thierry Reding)
* pci/controller/tegra264:
PCI: tegra264: Add Tegra264 support
dt-bindings: PCI: tegra264: Switch to PCIe Root Port bindings
dt-bindings: PCI: tegra264: Strictly distinguish C0 from C1-C5
|
|
- Add DT binding and driver support for RZ/V2H(P) SoC, which contains two
PCIe controllers, configured either as a single x4 link or two
independent x2 link controllers (Lad Prabhakar)
* pci/controller/rzg3s-host:
PCI: rzg3s-host: Add support for RZ/V2H(P) SoC
PCI: rzg3s-host: Prepare System Controller handling for multiple controllers
PCI: rzg3s-host: Use shared reset controls for power domain resets
dt-bindings: PCI: renesas,r9a08g045-pcie: Add RZ/V2H(P) support
|
|
- Add support for PCIe controller in EcoNet EN7528 and EN751221 SoCs (Caleb
James DeLisle)
* pci/controller/mediatek:
PCI: mediatek: Add support for EcoNet EN7528 SoC
|
|
- Fix resource leaks on error paths in host_init() (Ali Tariq)
- Fix runtime PM handling and teardown ordering to avoid register access
while power or clocks are disabled (Ali Tariq)
- Check for runtime PM resume failure to avoid register access while power
or clocks are disabled (Ali Tariq)
* pci/controller/plda-starfive:
PCI: starfive: Fix unchecked pm_runtime_get_sync() in probe
PCI: starfive: Fix Runtime PM handling and teardown ordering
PCI: starfive: Fix resource leaks on error paths in host_init()
|
|
- Fix event IRQ user-after-free issues (Ali Tariq)
- Fix IRQ domain leaks in error paths (Ali Tariq)
* pci/controller/plda-host:
PCI: plda: Fix IRQ domain leaks in the error paths of plda_init_interrupts()
PCI: plda: Fix use-after-free of event IRQs during teardown
|
|
- Add 'core', 'dbi', and 'aux' clocks to DT binding and manage them in the
driver (Jia Wang)
- Use module_platform_driver() since this may be built as a module, though
not removable because IRQs can't be safely disposed (Jia Wang)
* pci/controller/dwc-ultrarisc:
PCI: ultrarisc: Use module_platform_driver()
PCI: ultrarisc: Get and enable DP1000 PCIe controller clocks
dt-bindings: PCI: ultrarisc: Add required DP1000 PCIe clocks
|
|
- Add missing MODULE_DEVICE_TABLE() to generate module alias info for
OF-based module autoloading (Pengpeng Hou)
* pci/controller/dwc-spacemit-k1:
PCI: spacemit: Add missing MODULE_DEVICE_TABLE()
|
|
- When MSI is enabled but iMSI-RX is not used, configure AXIINTC to allow
GIT ITS to handle MSI (Marek Vasut)
- Refactor GIC600 implementation to make it easier to add platforms that
only support 32-bit addressing (Marek Vasut)
- Add Renesas R-Car Gen4 S4/V4H/V4M to the list of GIC600 integrations that
only support 32-bit addressing (Marek Vasut)
* pci/controller/dwc-rcar-gen4:
irqchip/gic-v3: Add Renesas R-Car Gen4 erratum workaround
irqchip/gic-v3: Refactor GIC600 limited to 32bit PA erratum handling
PCI: rcar-gen4: Configure AXIINTC if iMSI-RX is not used
PCI: dwc: Move iMSI-RX check before calling 'pp->ops->init()'
|
|
- Add DT binding and driver support for Hawi SoC (Matthew Leung)
- Skip PERST# GPIOs provided by downstream PCIe devices, which should be
handled by drivers of those devices (Manivannan Sadhasivam)
- Stop advertising Attention Button Present (no Qcom SoCs support Attention
Buttons) so pciehp can use Presence Detect Changed events (Qiang Yu)
* pci/controller/dwc-qcom:
PCI: qcom: Clear Attention Button Present in Slot Capabilities
PCI: qcom: Rename qcom_pcie_set_slot_nccs() to qcom_pcie_set_slot_cap()
PCI: qcom: Skip PERST# GPIOs provided by downstream PCIe devices
PCI: qcom: Add support for Hawi
dt-bindings: PCI: qcom: Document Hawi and Maili PCIe Controllers
|
|
- Correct the PERST# GPIO state so it remains asserted until power and
REFCLK become stable to fix enumeration failure (Ronald Claveau)
* pci/controller/dwc-meson:
PCI: meson: Fix GPIO state while requesting PERST#
|
|
- Fix OF node reference leak in init (Yuho Choi)
* pci/controller/dwc-keystone:
PCI: keystone: Fix OF node reference leak in init
|
|
- Remove PERST# checking from pci_host_common_parse_port() so callers can
decide whether to fall back to legacy DT binding with PERST# in the host
bridge (Sherry Sun)
- Fix build issues when PCI_PWRCTRL_GENERIC or PCI_HOST_COMMON is a module
(Arnd Bergmann)
- Create pwrctrl devices only once by doing it from imx_pcie_probe()
instead of imx_pcie_host_init(), which is used during both probe and
resume (Sherry Sun)
- Use 'dw_pcie_rp->skip_pwrctrl_off' to avoid powering off devices during
suspend to preserve wakeup capability (Sherry Sun)
- Add runtime PM support for i.MX95 to allow dynamic power management when
the link is idle (Richard Zhu)
* pci/controller/dwc-imx6:
PCI: imx6: Add runtime PM support for i.MX95
PCI: imx6: Add 'skip_pwrctrl_off' flag support
PCI: imx6: Move pci_pwrctrl_create_devices() to imx_pcie_probe()
PCI: imx6: Fix building against PCI_PWRCTRL_GENERIC
PCI: imx6: Fix building against PCI_HOST_COMMON
PCI: host-generic: Move legacy DT binding fallback decision to caller of pci_host_common_parse_ports()
|
|
- Factor pcie_valid_speed() and pci_bus_speed2lnkctl2() out of bwctrl so
they can be shared by the DWC core (Hans Zhang)
- Flush MSI writes from endpoint before unmapping the iATU, as we already
do for MSI-X writes (Niklas Cassel)
- Unmap MSI iATU window before mapping MSI-X window, to avoid a subsequent
MSI write using a disabled aperture and losing the interrupt (Niklas
Cassel)
- Change endpoint .pre_init() and .init() callbacks to return errors and
handle them (Marek Vasut)
* pci/controller/dwc:
PCI: dwc: Handle return value from endpoint .pre_init callback
PCI: dwc: Handle return value from endpoint .init callback
PCI: dwc: ep: Fix unmap potentially unmapping the wrong iATU
PCI: dwc: ep: Flush cached MSI write before unmapping the iATU
PCI: dwc: Use common speed conversion function
PCI: Move pci_bus_speed2lnkctl2() to public header
PCI: Add public pcie_valid_speed() for shared validation
|
|
- Add missing MODULE_DEVICE_TABLE to generate module aliases for OF-based
module autoloading (Pengpeng Hou)
- Add debugfs 'ltssm_status' file for LGA- and HPA-based Cadence
controllers (Hans Zhang)
- Support up to x4 (not x2) lanes for J200 (Takuma Fujiwara)
- Fix host/endpoint dependencies for cadence-plat driver to fix link error
when cadence-plat is built-in but the host or endpoint driver is modular
(Aksh Garg)
* pci/controller/cadence:
PCI: cadence: Fix host/endpoint dependencies for cadence-plat driver
PCI: j721e: Fix incorrect max_lanes for J7200
PCI: cadence: Add LGA IP debugfs for LTSSM status
PCI: cadence: Add HPA IP debugfs for LTSSM status
PCI: cadence: Add HPA architecture flag
PCI: cadence: Add missing MODULE_DEVICE_TABLE()
|
|
- Switch to irq_domain_create_linear() so we can obsolete
irq_domain_add_linear() (Jiri Slaby)
* pci/controller/aspeed:
PCI: aspeed: Switch to irq_domain_create_linear()
|
|
- Fix NULL pointer dereference that caused enumeration failures on 32-bit
CAM systems (Steffen Persvold)
* pci/controller/host-generic:
PCI: host-generic: Fix NULL pointer dereference on 32-bit CAM systems
|
|
* pci/controller/root-port-reset:
misc: pci_endpoint_test: Add AER error handlers
PCI: dw-rockchip: Implement .reset_root_port() and use for link down
PCI: qcom: Implement .reset_root_port() and use for link down
PCI: host-common: Add link down handling for Root Ports
PCI/ERR: Add support for resetting the Root Ports in a platform-specific way
PCI: dwc: ep: Clear MSI iATU mapping in dw_pcie_ep_cleanup()
|
|
- Add support for PCIe WAKE# interrupt when described via DT (Krishna
Chaitanya Chundru)
* pci/wake:
PCI: Add support for PCIe WAKE# interrupt
|
|
- Add ACS quirk for Pericom PI7C9X2G608 switches (Tim Harvey)
- Fix a long-standing bug in the Intel PCH Root Port MPC ACS quirk that
didn't update the intended INTEL_MPC_REG_IRBNCE bit because it used a
16-bit config write when a 32-bit write was intended (Mohamad Raizudeen)
* pci/virtualization:
PCI: Fix 32-bit config write in Intel PCH Root Port MPC ACS quirk
PCI: Add ACS quirk for Pericom PI7C9X2G608 switches [12d8:2608]
|
|
- In pci_write_legacy_io(), avoid out-of-bounds reads from the user buffer
and fix incorrect ioport write data (1-byte writes on little-endian
powerpc, 2- and 4-byte writes on big-endian powerpc) (Krzysztof
Wilczyński)
- In pci_read_legacy_io(), fix incorrect ioport read data for 2- and 4-byte
reads on big-endian powerpc (Krzysztof Wilczyński)
- Fix I/O port accessor argument order in Alpha pci_legacy_write()
(Krzysztof Wilczyński)
- Avoid spurious runtime PM wakeup on config space accesses that are
outside config space and fail before reaching PCI (Krzysztof Wilczyński)
- Return -EINVAL, not -ENODEV, for mmap of I/O BAR that fails because the
arch doesn't support it, as we do for procfs (Krzysztof Wilczyński)
- Check for LOCKDOWN_PCI_ACCESS for legacy_io and legacy_mem, as we do for
other config space accessors (Krzysztof Wilczyński)
- Tidy static resource attribute names and macros that build them
(Krzysztof Wilczyński)
* pci/sysfs:
PCI/sysfs: Add legacy I/O and memory attribute macros
alpha/PCI: Make the suffix the first __pci_dev_resource_attr() parameter
PCI/sysfs: Add pci_ prefix to static PCI resource attribute names
PCI/sysfs: Add lockdown checks to legacy I/O and memory handlers
PCI/sysfs: Return -EINVAL for unsupported I/O BAR mmap
PCI/sysfs: Avoid spurious runtime PM wakeup on config space accesses
alpha/PCI: Fix I/O port accessor argument order in pci_legacy_write()
PCI/sysfs: Fix read byte order in pci_read_legacy_io()
PCI/sysfs: Fix out-of-bounds read in pci_write_legacy_io()
|
|
- Add Microchip PCI1008 device ID and include it in NTB DMA alias quirk
(Logan Gunthorpe)
* pci/switchtec:
PCI: switchtec: Add Microchip PCI1008 to NTB DMA alias quirk
PCI: switchtec: Add Microchip PCI1008 device ID
dmaengine: switchtec-dma: Add PCI1008 device ID
|
|
- Add hotplug reservation only once (not at each level of the hierarchy) so
bridge windows don't grow more than necessary (Ilpo Järvinen)
* pci/resource:
PCI: Do not add hotplug reservation multiple times
|
|
- Take a reference on the I2C adapter in tc9563 to avoid uninterruptible
hang when unloading an I2C module while in-use (Johan Hovold)
- Restrict tc9563 Tx Amplitude, DFE and N_FTS to USP, DSP1 and DSP2 in DT
binding (Manivannan Sadhasivam)
- Fix parsing tc9563 integrated Ethernet MAC Endpoint node (Manivannan
Sadhasivam)
- Power off only tc9563 external-facing ports (DSP1, DSP2), leaving USP and
DSP3 powered up (Manivannan Sadhasivam)
- Skip tc9563 Tx amplitude and DFE tuning for DSP3, which don't support
them (Manivannan Sadhasivam)
- Move integrated MAC Endpoint out of the list of internal ports and
configure it separately (Manivannan Sadhasivam)
* pci/pwrctrl:
PCI/pwrctrl: tc9563: Move Integrated MAC Endpoint out of 'tc9563_pwrctrl_ports' enum
PCI/pwrctrl: tc9563: Rename DSP3 to VDSP
PCI/pwrctrl: tc9563: Skip Tx amplitude and DFE tuning for DSP3
PCI/pwrctrl: tc9563: Power off only the external ports in tc9563_pwrctrl_disable_port()
PCI/pwrctrl: tc9563: Fix parsing the integrated Ethernet MAC Endpoint node
dt-bindings: PCI: toshiba,tc9563: Restrict Tx Amplitude, DFE and N_FTS to USP, DSP1 and DSP2
PCI/pwrctrl: tc9563: Take i2c adapter module reference
|
|
- Avoid spurious runtime PM wakeup on config space accesses that are
outside config space and fail before reaching PCI (Krzysztof Wilczyński)
- Warn on user-space writes to kernel-exclusive config space regions, as we
already do for sysfs (Krzysztof Wilczyński)
- Check credentials of opener, not reader, for config space reads, as we
already to for sysfs (Krzysztof Wilczyński)
* pci/procfs:
PCI/proc: Use file_ns_capable() when checking config space read access
PCI/proc: Warn on writes to kernel-exclusive config space regions
PCI/proc: Avoid spurious runtime PM wakeup on config space accesses
|
|
- Allow probing even without child services so it can do power management
(Brian Norris)
* pci/portdrv:
PCI/portdrv: Allow probing even without child services
|
|
- Allow D3 for native hotplug-capable Root Ports on non-x86 platforms (we
avoid D3 for these ports on x86 because some old platforms didn't
validate it) (Manivannan Sadhasivam)
* pci/pm:
PCI: Allow D3 for native hotplug-capable Root Ports on non-x86 platforms
|
|
- Add Nvidia Vera Rubin to list of platforms that support P2PDMA (Leon
Romanovsky)
* pci/p2pdma:
PCI/P2PDMA: Add Nvidia Vera Rubin to whitelist
|
|
- Pass empty string, not an uninitialized device_class string, to
acpi_bus_generate_netlink_event(), so we can remove device_class
completely in the future (Rafael J. Wysocki)
* pci/hotplug:
PCI: acpiphp_ibm: Do not use uninitialized device_class
|
|
- Don't store pci_device_id in agp amd-k7 and via, ata, scsi nsp32, ipack
tpci200, mlxsw since the dynamic ID feature means the ID is only
guaranteed to live during probe (Gary Guo)
- Add pci_match_one_id() to match an ID directly so dynamic ID insertion
doesn't need to make a temporary device for matching (Gary Guo)
- Check for existing ID inside the dynamic ID addition critical section to
avoid a time-of-check vs time-of-use race (Gary Guo)
- Copy device ID to avoid use-after-free when match races with sysfs
dynamic ID removal (Gary Guo)
* pci/enumeration:
PCI: Fix UAF when probe runs concurrent to dyn ID removal
PCI: Fix dyn_id add TOCTOU
PCI: Make pci_match_one_device() match on ID instead of device
agp/amd-k7: Don't rely on address of pci_device_id
agp/via: Don't rely on address of pci_device_id
mlxsw: pci: Don't store pci_device_id
ipack: tpci200: Don't store pci_device_id
scsi: nsp32: Don't store pci_device_id
ata: ata_generic: Don't store pci_device_id
|
|
- Allow DPC on all Downstream Ports, not just Root Ports, when OS controls
AER (Darshit Shah)
* pci/dpc:
PCI/DPC: Allow DPC on all Downstream Ports when OS controls AER
|
|
- Avoid L0s for Realtek RTS525A, where it causes an AER interrupt storm
(Max Lee)
- Program the same ASPM Control values for every function of multi-function
devices, as recommended by the PCIe spec (Krishna Chaitanya Chundru)
- Avoid ASPM L0s, L1, and L1 PM Substates based on 'aspm-no-l0s',
'aspm-no-l1' [1], and 'aspm-no-l1ss' DT properties (Krishna Chaitanya
Chundru)
* pci/aspm:
PCI/ASPM: Mask ASPM states based on Devicetree properties
PCI/ASPM: Disable/restore ASPM on every function for multi-function devices
PCI/ASPM: Use pcie_capability_clear_and_set_word() for ASPM disable/restore
PCI/ASPM: Avoid L0s for Realtek RTS525A
|
|
Pull drm updates from Dave Airlie:
"Highlights:
- dmemcg eviction support is good for low VRAM things like Steam
Machine
- AMD adds gfx6-8 modifier support for older GPUs that enables a
bunch of wayland stuff
- i915/xe has some new hw support but also a lot of display
refactoring
Everything:
perf:
- export perf_allow_ APIs for xe
udmabuf:
- remove default size limit of 64MB
rust:
- i/o rework (signed tag from driver-core tree)
- add registration guard and registration data
- fix unbounded lifetimes in ioctl handler args
- fix a drm_dev_register race
- gem_shmem: add DmaResvGuard helper
- gpuvm: require send/sync for driver data
- implement send/sync for GpuVaAlloc and GpuVmBo
- add SmContext lifetime
- rename dma_handle to dma_address
- change pci_sriov_get_totalvfs return to unsigned int
core:
- create drm_of_get_panel_orientation
- send per-connector hotplug events
- add thunderbolt UBHR tunneling support
connector:
- add color format property
dmem:
- introduce a peak file
- accept one region per limit
- add dmemcg support for eviction
gpusvm:
- reorg code to give drivers more flexibility
atomic:
- add create_state callback and helper
- add documentation on atomic commit lifetime
buddy:
- add per-order free
- add used block scoreboard
- fix UAF
- test buffer clearance on resume
- add phys_addr->block helper
gem:
- drop DRIVER_GEM_GPUVA flag
ttm:
- be more aggressive allocating below protection limit
sched:
- add test suite for concurrent job submissions
hdmi:
- hook the color format property in helpers
mipi-dsi:
- add MIPI_DSI_MODE_DSC_ALL_SLICES_IN_PKT
bridge:
- add atomic create callbacks
- drop atomic reset
- display-connector: don't autoenable HPD IRQ
- trigger initial HPD for DP
- ti-sn65dsi83: remove NO_HFP and NO_HBP mode flags
- analogix_dp: switch to DP link training helpers
dp:
- add support for DSC max delta BPP
edid:
- parse panel type from DisplayID 2.x Display Parameters
sysfb:
- improve panel, stride, framebuffer size validation
panel:
- implement ref counting for struct drm_panel
- himax-hx83121a: add backlight regulator support
- novatek-nt36672a: Inline panel init sequences
- visionox-vtdr6130: enable DSC
- novatek-nt37801: Use mipi_dsi_*_multi() functions
- samsung-s6d16d0: Fix prepare error handling
- support Novatek NT36536 plus DT bindings
- sofef00: fix backlight updates
- osd101t2587: use mipi_dsi_*_multi interface
- panel-edp: adjust timing for AUO displays
- panel-lvds: support Opto Logic SCX1001511GGC49
- panel-simple: support Kyocera tcg070wvlq
- panel-edp: quirks
- AUO B116XAT04.3, CMN N116BCP-EA2, CSW MNB601LS1-8
- BOE NV116WH2-M30, BOE NT116WHM-N21, BOE NV116FH1-M31
- BOE NV116FH1-M30, NV140FHM-N5B, TM156VDXP25
- BOE NE160QDM-NY1, MB116AS01
- new:
- Samsung ATNA40HQ08-0, Anbernic TD4310
- Chipone ICNA35XX, Ilitek ILI9488
- Ilitek ILI7807S, Renesas R63419
- MNE001BS6-2, MNF601BS4-1, Sharp LQ120P1JX51
virtio:
- add support for save/restore virtio_gpu_objects
- abort vq wait on device removal
amdgpu:
- add color format DRM property
- initial compute pipe reset support
- add GFX 6-8 modifier support
- initial DCN 6.0.0 support
- dmemcg eviction support
- improved boundary checking for bios parsing
- RAS updates and rework
- VCN secure submission fixes
- 8K panel fix
- Display KUNIT tests
- parse panel type from DisplayID
- Align IP discovery to pci device lifetime
- SOC15 register macro cleanups
- UVD memory placement fixes
- GFX9 mode2 reset fixes
- drop unnecessary BUG/BUG_ON
- GFX8 soft reset rework
- enable soft reset on GFX8
- PSP/SMU 15.0.9 update
- VI ASPM fix
- userq fixes
- amdgpu_vm_get_task_info_pasid lifetime fix
- DC CACP support
- change system_unbound_wq with system_dfl_wq
- Loosen VFCT bios parsing to deal with pci=realloc
- SI/SMU7 AC/DC switch fix
- VM fence handling fix
- GEM close optimisation
- Apple Studio Display fixes
- DC FRL fixes
amdkfd:
- initial compute pipe reset support
- allow applications to opt out of sigbus on fatal errors
- improve CRIU boundary checks
- MQD handling rework
- move TBA/TMA from system to device memory
- avoid topology-lock in kfd_mmap
- SVM eviction fixes
radeon:
- fix unset CONFIG_ACPI build
i915:
- Novalake (NVL display version 35) timing generator enabling
- NVL DC3CO enabling
- enable UBHR link rates on thunderbolt tunnels
- Reduce Xe3+ PM demand peak bandwidth
- enable pipe DMC error interrupts for display 30+
- add kunit tests for DP link config selection
- refactor and document DP link recovery
- i915/xe driver display probe/remove/suspend/resume/shutdown cleanup
and unification
- i915/xe display runtime PM unified
- Break i915 and xe panic dependency on struct intel_framebuffer
- Streamline Pre/Post-CSC LUT loops
- drop TGL DC3DO support
- CDCLK santization
- fix HDMI scrambling enable
- fix phys bo pread/pwrite with offset
- add missing nospec on parallel submit slot
- fix some NULL derefs
xe:
- drop force_execlist module param
- gate observation streams with perf_allow_cpu
- skip FORCE_WC and vm_bound check for external dma-bufs
- dmemcg eviction support
- remove unused NVL-S GuC
- TLB invalidation improvements
- NVL-S updated PCI-IDs and w/a
- madvise: optimise invalidation path
- fix infinite gt-reset loop in timeout recovery
- update TTM device benefical_order
- wait on external BO kernel fences in exec ioctl
- add/use more KLV helpers
- sriov: disable display in admin only PF mode
- add RAS GPU health indicator
- optimise TTM populate for DONTNEED BO
- drop force_probe for NVL-s
- add debugfs for pcode info
amdxdna:
- disable device buffer export
nova:
- build nova-core/nova-drm from drivers/gpu
- export nova-core rust symbols (workaround)
- GSP boot process consolidation
- Boot GSP with vGPU enabled
- TLV firmware image format support
- Hopper/Blackwell fixes and cleanups
- I/O projection adoption
tyr:
- firmware loading and MCU boot
- add generic slot manager + MMU
- GPU VM support ARM64 LPAE page tables
- add kernel buffer object for internal allocations
- add parser for Mali CSF
- add MCU booting
nouveau:
- race fixes
- check instmem iomapping at first use
- add dmemcg support
- expose NVDEC channels
- add scanline position/head state support for GSP
qxl:
- convert simple encoder to regular
ethosu:
- add perf counter support
etnaviv:
- force flush on power register ops
msm:
- support DSC configuration with slice_per_pkt > 1
mxsfb:
- fix disable sequence
panthor:
- support sparse mappings
rockchip:
- switch away from simple helpers
- support YUV background color
- fix layer config timeout
- add edp support for rk3576
- add batch command submission function
rocket:
- error handling and NULL ptr deref fixes
sun4i:
- switch away from simple helpers
imagination:
- mark BXM-4-64 MC1 as support
host1x:
- support tegra264
tegra:
- add DSI for tegra 20/30
v3d:
- reduce PM runtime autosuspend delay
- scheduler fixes and refactoring
- deprecate v3d 3.3 and 4.1
- validate CPU job query boundaries
hibmc:
- improve plane format handling
- switch to gem shmem
mediatek:
- cec: correct compat for mt7623-8167?
exynos:
- remove simple dependency
- add error handling to encoder paths
- take i2c adapter module reference"
* tag 'drm-next-2026-08-20' of https://gitlab.freedesktop.org/drm/kernel: (2074 commits)
drm/xe/mcr: Take vcs1/vecs1 into account for first media slice
drm/xe: Fix a bug in pc_adjust_freq_bounds()
drm/xe: Fix xe_device_probe() failure
drm/xe/drm_ras: Move has_drm_ras check to drm_ras layer
drm/xe/ras: Fix boot-time ras error processing
drm/amd/display: make DC_RUN_WITH_PREEMPTION_ENABLED misuse a build error
drm/amd/pm: silence uninitialized variable warnings
drm/amdgpu: skip BOs being torn down during GTT recovery
drm/amdgpu: Reject UVD message with invalid number of h265 refs
drm/amdgpu: keep PRT mappings off the vm_bo state lists
drm/amdgpu: fix nbif 6.3.1 l1 low power not functional
drm/amd/display: fix BT.2020 YCbCr output CSC matrices for DCE
drm/amd/display: fix BT.2020 YCbCr limited output CSC matrix
drm/amdgpu: Implement insert_end for VCE 3
drm/amdgpu: Fix UVD min buffer sizes
drm/amdgpu: Fix UVD decode image min size calculation
drm/amdgpu: Fix UVD dpb min size calculation for H264
drm/amdgpu: Reject UVD message with dimensions above 4096
drm/amdgpu: check ASPM on the dGPU host link
drm/radeon: fix autosuspend cleanup during teardown
...
|
|
Pull VFIO updates from Alex Williamson:
- Add nv_falcon vfio selftest driver.
The Falcon is a general-purpose microcontroller embedded within
NVIDIA GPUs, presenting a relatively simple DMA programming
interface.
This adds another selftest target for vfio-pci with real DMA
transfers (Rubin Du, Alex Williamson)
- Add allocation assertion helpers to vfio selftests and use them to
avoid variable length arrays and the compiler errors they generate
(Alex Mastro)
- Fix use-after-free hazard where an init path error in MSI support
leaves a stray pointer that can later be reused or double-freed
(Xiang Mei)
- Fix previous refactor of PCI BAR mappings to honor non_mappable_bars
flag, which otherwise generates a warning when trying to pci_iomap()
a 256TiB BAR on ISM devices on s390 (Farhan Ali)
- Add igb vfio selftest driver.
Like nv_falcon, this provides another target for DMA testing with
vfio selftests, but importantly this driver supports both physical
82576 NICs and the emulation model in QEMU.
This therefore enables a vfio selftest vector with no physical
hardware requirements (Josh Hilke, Alex Williamson)
- Mark selftest fixture objects __maybe_unused to accommodate builds
with clang -Wunused-but-set-global (David Matlack)
- Add error recovery for vfio-pci devices on s390x.
This expands devices which expose the existing error eventfd and
introduces a device feature for reporting firmware defined error
state information to the user, allowing recovery through hypervisor
channels (Farhan Ali)
* tag 'vfio-v7.3-rc1' of https://github.com/awilliam/linux-vfio:
vfio/pci: Remove the pcie check for VFIO_PCI_ERR_IRQ_INDEX
vfio-pci/zdev: Add a device feature for error information
s390/pci: Store PCI error information for passthrough devices
PCI/MSI: Enable memory decoding before restoring MSI-X messages
PCI: Fail FLR when config space is inaccessible
PCI: Avoid saving config space state if inaccessible
PCI: Allow per function PCI slots to fix slot reset on s390
PCI: Introduce PCI_SLOT_PLACEHOLDER constant for slot_nr placeholder value
selftests: harness: Mark test fixture objects __maybe_unused
vfio: selftests: Retry on EAGAIN during device reset
vfio: selftests: igb: Add driver for Intel 82576 device
vfio: selftests: Add helpers to re-enable interrupts
vfio/pci: Avoid mapping BARs for devices with non-mappable BARs
vfio/pci: clear vdev->msi_perm after freeing it on init failure
vfio: selftests: Avoid VLAs
vfio: selftests: Add allocation assert helpers
vfio: selftests: Add NVIDIA Falcon driver for DMA testing
vfio: selftests: Allow drivers without send_msi() support
vfio: selftests: Add generic PCI command register helpers
vfio: selftests: Add memcpy chunking to vfio_pci_driver_memcpy()
|
Linus Torvalds
Angel J
Liz Fong-Jones
Richard Zhu
Kees Cook
Bartosz Golaszewski
Naman Jain
Bjorn Helgaas