| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull arm64 updates from Will Deacon:
"The headline feature is the re-enablement of support for Arm's
Scalable Matrix Extension (SME) thanks to a bumper crop of fixes
from Mark Rutland.
If matrices aren't your thing, then Ryan's page-table optimisation
work is much more interesting.
Summary:
ACPI, EFI and PSCI:
- Decouple Arm's "Software Delegated Exception Interface" (SDEI)
support from the ACPI GHES code so that it can be used by platforms
booted with device-tree
- Remove unnecessary per-CPU tracking of the FPSIMD state across EFI
runtime calls
- Fix a node refcount imbalance in the PSCI device-tree code
CPU Features:
- Ensure register sanitisation is applied to fields in ID_AA64MMFR4
- Expose AIDR_EL1 to userspace via sysfs, primarily so that KVM
guests can reliably query the underlying CPU types from the VMM
- Re-enabling of SME support (CONFIG_ARM64_SME) as a result of fixes
to our context-switching, signal handling and ptrace code
Entry code:
- Hook up TIF_NEED_RESCHED_LAZY so that CONFIG_PREEMPT_LAZY can be
selected
Memory management:
- Prevent BSS exports from being used by the early PI code
- Propagate level and stride information to the low-level TLB
invalidation routines when operating on hugetlb entries
- Use the page-table contiguous hint for vmap() mappings with
VM_ALLOW_HUGE_VMAP where possible
- Optimise vmalloc()/vmap() page-table updates to use "lazy MMU mode"
and hook this up on arm64 so that the trailing DSB (used to publish
the updates to the hardware walker) can be deferred until the end
of the mapping operation
- Extend mmap() randomisation for 52-bit virtual addresses (on par
with 48-bit addressing) and remove limited support for
randomisation of the linear map
Perf and PMUs:
- Add support for probing the CMN-S3 driver using ACPI
- Minor driver fixes to the CMN, Arm-NI and amlogic PMU drivers
Selftests:
- Fix FPSIMD and SME tests to align with the freshly re-enabled SME
support
- Fix default setting of the OUTPUT variable so that tests are
installed in the right location
vDSO:
- Replace raw counter access from inline assembly code with a call to
the the __arch_counter_get_cntvct() helper function
Miscellaneous:
- Add some missing header inclusions to the CCA headers
- Rework rendering of /proc/cpuinfo to follow the x86-approach and
avoid repeated buffer expansion (the user-visible format remains
identical)
- Remove redundant selection of CONFIG_CRC32
- Extend early error message when failing to map the device-tree
blob"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (83 commits)
arm64: cputype: Add cputype definition for HIP12
arm64: el2_setup.h: Make __init_el2_fgt labels consistent, again
perf/arm-cmn: Add CMN S3 ACPI binding
arm64/boot: Disallow BSS exports to startup code
arm64/boot: Move global CPU override variables out of BSS
arm64/boot: Move init_pgdir[] and init_idmap_pgdir[] into __pi_ namespace
perf/arm-cmn: Initialise cmn->cpu earlier
kselftest/arm64: Set default OUTPUT path when undefined
arm64: Update comment regarding values in __boot_cpu_mode
arm64: mm: Drop redundant check in pmd_trans_huge()
arm64/mm: Re-organise setting up FEAT_S1PIE registers PIRE0_EL1 and PIR_EL1
arm64/mm: Permit lazy_mmu_mode to be nested
arm64/mm: Disable barrier batching in interrupt contexts
arm64/cpuinfo: only show one cpu's info in c_show()
arm64/mm: Batch barriers when updating kernel mappings
mm/vmalloc: Enter lazy mmu mode while manipulating vmalloc ptes
arm64/mm: Support huge pte-mapped pages in vmap
mm/vmalloc: Gracefully unmap huge ptes
mm/vmalloc: Warn on improper use of vunmap_range()
arm64/mm: Hoist barriers out of set_ptes_anysz() loop
...
|
|
The throttle support has been added in the generic code. Remove
the driver-specific throttle support.
Besides the throttle, perf_event_overflow may return true because of
event_limit. It already does an inatomic event disable. The pmu->stop
is not required either.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250520181644.2673067-10-kan.liang@linux.intel.com
|
|
The throttle support has been added in the generic code. Remove
the driver-specific throttle support.
Besides the throttle, perf_event_overflow may return true because of
event_limit. It already does an inatomic event disable. The pmu->stop
is not required either.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Leo Yan <leo.yan@arm.com>
Link: https://lore.kernel.org/r/20250520181644.2673067-9-kan.liang@linux.intel.com
|
|
An ACPI binding for CMN S3 was not yet finalised when the driver support
was originally written, but v1.2 of DEN0093 "ACPI for Arm Components"
has at last been published; support ACPI systems using the proper HID.
Cc: stable@vger.kernel.org
Fixes: 0dc2f4963f7e ("perf/arm-cmn: Support CMN S3")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/7dafe147f186423020af49d7037552ee59c60e97.1747652164.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
For all the complexity of handling affinity for CPU hotplug, what we've
apparently managed to overlook is that arm_cmn_init_irqs() has in fact
always been setting the *initial* affinity of all IRQs to CPU 0, not the
CPU we subsequently choose for event scheduling. Oh dear.
Cc: stable@vger.kernel.org
Fixes: 0ba64770a2f2 ("perf: Add Arm CMN-600 PMU driver")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Link: https://lore.kernel.org/r/b12fccba6b5b4d2674944f59e4daad91cd63420b.1747069914.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The Amlogic DDR PMU driver meson_ddr_pmu_create() function incorrectly uses
smp_processor_id(), which assumes disabled preemption. This leads to kernel
warnings during module loading because meson_ddr_pmu_create() can be called
in a preemptible context.
Following kernel warning and stack trace:
[ 31.745138] [ T2289] BUG: using smp_processor_id() in preemptible [00000000] code: (udev-worker)/2289
[ 31.745154] [ T2289] caller is debug_smp_processor_id+0x28/0x38
[ 31.745172] [ T2289] CPU: 4 UID: 0 PID: 2289 Comm: (udev-worker) Tainted: GW 6.14.0-0-MANJARO-ARM #1 59519addcbca6ba8de735e151fd7b9e97aac7ff0
[ 31.745181] [ T2289] Tainted: [W]=WARN
[ 31.745183] [ T2289] Hardware name: Hardkernel ODROID-N2Plus (DT)
[ 31.745188] [ T2289] Call trace:
[ 31.745191] [ T2289] show_stack+0x28/0x40 (C)
[ 31.745199] [ T2289] dump_stack_lvl+0x4c/0x198
[ 31.745205] [ T2289] dump_stack+0x20/0x50
[ 31.745209] [ T2289] check_preemption_disabled+0xec/0xf0
[ 31.745213] [ T2289] debug_smp_processor_id+0x28/0x38
[ 31.745216] [ T2289] meson_ddr_pmu_create+0x200/0x560 [meson_ddr_pmu_g12 8095101c49676ad138d9961e3eddaee10acca7bd]
[ 31.745237] [ T2289] g12_ddr_pmu_probe+0x20/0x38 [meson_ddr_pmu_g12 8095101c49676ad138d9961e3eddaee10acca7bd]
[ 31.745246] [ T2289] platform_probe+0x98/0xe0
[ 31.745254] [ T2289] really_probe+0x144/0x3f8
[ 31.745258] [ T2289] __driver_probe_device+0xb8/0x180
[ 31.745261] [ T2289] driver_probe_device+0x54/0x268
[ 31.745264] [ T2289] __driver_attach+0x11c/0x288
[ 31.745267] [ T2289] bus_for_each_dev+0xfc/0x160
[ 31.745274] [ T2289] driver_attach+0x34/0x50
[ 31.745277] [ T2289] bus_add_driver+0x160/0x2b0
[ 31.745281] [ T2289] driver_register+0x78/0x120
[ 31.745285] [ T2289] __platform_driver_register+0x30/0x48
[ 31.745288] [ T2289] init_module+0x30/0xfe0 [meson_ddr_pmu_g12 8095101c49676ad138d9961e3eddaee10acca7bd]
[ 31.745298] [ T2289] do_one_initcall+0x11c/0x438
[ 31.745303] [ T2289] do_init_module+0x68/0x228
[ 31.745311] [ T2289] load_module+0x118c/0x13a8
[ 31.745315] [ T2289] __arm64_sys_finit_module+0x274/0x390
[ 31.745320] [ T2289] invoke_syscall+0x74/0x108
[ 31.745326] [ T2289] el0_svc_common+0x90/0xf8
[ 31.745330] [ T2289] do_el0_svc+0x2c/0x48
[ 31.745333] [ T2289] el0_svc+0x60/0x150
[ 31.745337] [ T2289] el0t_64_sync_handler+0x80/0x118
[ 31.745341] [ T2289] el0t_64_sync+0x1b8/0x1c0
Changes replaces smp_processor_id() with raw_smp_processor_id() to
ensure safe CPU ID retrieval in preemptible contexts.
Cc: Jiucheng Xu <jiucheng.xu@amlogic.com>
Fixes: 2016e2113d35 ("perf/amlogic: Add support for Amlogic meson G12 SoC DDR PMU driver")
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Link: https://lore.kernel.org/r/20250407063206.5211-1-linux.amoon@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Somehow the encodings for REQ2/SNP2 channels in XP events
got mixed up... Unmix them.
CC: stable@vger.kernel.org
Fixes: 23760a014417 ("perf/arm-cmn: Add CMN-700 support")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/087023e9737ac93d7ec7a841da904758c254cb01.1746717400.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Enabling the compile test should not cause automatic enabling of all
drivers, but only allow to choose to compile them.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250417074650.81561-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add missing platform_set_drvdata in arm_ni_probe(), otherwise
calling platform_get_drvdata() in remove returns NULL.
Fixes: 4d5a7680f2b4 ("perf: Add driver for Arm NI-700 interconnect PMU")
Signed-off-by: Hongbo Yao <andy.xu@hj-micro.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20250401054248.3985814-1-andy.xu@hj-micro.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
When a resource allocation fails in one clock domain of an NI device,
we need to properly roll back all previously registered perf PMUs in
other clock domains of the same device.
Otherwise, it can lead to kernel panics.
Calling arm_ni_init+0x0/0xff8 [arm_ni] @ 2374
arm-ni ARMHCB70:00: Failed to request PMU region 0x1f3c13000
arm-ni ARMHCB70:00: probe with driver arm-ni failed with error -16
list_add corruption: next->prev should be prev (fffffd01e9698a18),
but was 0000000000000000. (next=ffff10001a0decc8).
pstate: 6340009 (nZCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--)
pc : list_add_valid_or_report+0x7c/0xb8
lr : list_add_valid_or_report+0x7c/0xb8
Call trace:
__list_add_valid_or_report+0x7c/0xb8
perf_pmu_register+0x22c/0x3a0
arm_ni_probe+0x554/0x70c [arm_ni]
platform_probe+0x70/0xe8
really_probe+0xc6/0x4d8
driver_probe_device+0x48/0x170
__driver_attach+0x8e/0x1c0
bus_for_each_dev+0x64/0xf0
driver_add+0x138/0x260
bus_add_driver+0x68/0x138
__platform_driver_register+0x2c/0x40
arm_ni_init+0x14/0x2a [arm_ni]
do_init_module+0x36/0x298
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Oops - BUG: Fatal exception
SMP: stopping secondary CPUs
Fixes: 4d5a7680f2b4 ("perf: Add driver for Arm NI-700 interconnect PMU")
Signed-off-by: Hongbo Yao <andy.xu@hj-micro.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20250403070918.4153839-1-andy.xu@hj-micro.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The special case for trying to infer the DTC domain for DTC-adjacent
nodes on CMN-600 is fragile and buggy - currently resulting in subtly
messed up DTC counter allocation - and the theoretical benefit it
offers to a tiny minority of use-cases arguably doesn't outweigh the
inconsistency it offers to others anyway. Just get rid of it.
Fixes: ab33c66fd8f1 ("perf/arm-cmn: Enable per-DTC counter allocation")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/67985e39f53b56385d79a4f1264cf7f9cacedb58.1742308248.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Enable Configuration RRS SV, which makes device readiness visible,
early instead of during child bus scanning (Bjorn Helgaas)
- Log debug messages about reset methods being used (Bjorn Helgaas)
- Avoid reset when it has been disabled via sysfs (Nishanth
Aravamudan)
- Add common pci-ep-bus.yaml schema for exporting several peripherals
of a single PCI function via devicetree (Andrea della Porta)
- Create DT nodes for PCI host bridges to enable loading device tree
overlays to create platform devices for PCI devices that have
several features that require multiple drivers (Herve Codina)
Resource management:
- Enlarge devres table[] to accommodate bridge windows, ROM, IOV
BARs, etc., and validate BAR index in devres interfaces (Philipp
Stanner)
- Fix typo that repeatedly distributed resources to a bridge instead
of iterating over subordinate bridges, which resulted in too little
space to assign some BARs (Kai-Heng Feng)
- Relax bridge window tail sizing for optional resources, e.g., IOV
BARs, to avoid failures when removing and re-adding devices (Ilpo
Järvinen)
- Allow drivers to enable devices even if we haven't assigned
optional IOV resources to them (Ilpo Järvinen)
- Rework handling of optional resources (IOV BARs, ROMs) to reduce
failures if we can't allocate them (Ilpo Järvinen)
- Fix a NULL dereference in the SR-IOV VF creation error path (Shay
Drory)
- Fix s390 mmio_read/write syscalls, which didn't cause page faults
in some cases, which broke vfio-pci lazy mapping on first access
(Niklas Schnelle)
- Add pdev->non_mappable_bars to replace CONFIG_VFIO_PCI_MMAP, which
was disabled only for s390 (Niklas Schnelle)
- Support mmap of PCI resources on s390 except for ISM devices
(Niklas Schnelle)
ASPM:
- Delay pcie_link_state deallocation to avoid dangling pointers that
cause invalid references during hot-unplug (Daniel Stodden)
Power management:
- Allow PCI bridges to go to D3Hot when suspending on all non-x86
systems (Manivannan Sadhasivam)
Power control:
- Create pwrctrl devices in pci_scan_device() to make it more
symmetric with pci_pwrctrl_unregister() and make pwrctrl devices
for PCI bridges possible (Manivannan Sadhasivam)
- Unregister pwrctrl devices in pci_destroy_dev() so DOE, ASPM, etc.
can still access devices after pci_stop_dev() (Manivannan
Sadhasivam)
- If there's a pwrctrl device for a PCI device, skip scanning it
because the pwrctrl core will rescan the bus after the device is
powered on (Manivannan Sadhasivam)
- Add a pwrctrl driver for PCI slots based on voltage regulators
described via devicetree (Manivannan Sadhasivam)
Bandwidth control:
- Add set_pcie_speed.sh to TEST_PROGS to fix issue when executing the
set_pcie_cooling_state.sh test case (Yi Lai)
- Avoid a NULL pointer dereference when we run out of bus numbers to
assign for a bridge secondary bus (Lukas Wunner)
Hotplug:
- Drop superfluous pci_hotplug_slot_list, try_module_get() calls, and
NULL pointer checks (Lukas Wunner)
- Drop shpchp module init/exit logging, replace shpchp dbg() with
ctrl_dbg(), and remove unused dbg(), err(), info(), warn() wrappers
(Ilpo Järvinen)
- Drop 'shpchp_debug' module parameter in favor of standard dynamic
debugging (Ilpo Järvinen)
- Drop unused cpcihp .get_power(), .set_power() function pointers
(Guilherme Giacomo Simoes)
- Disable hotplug interrupts in portdrv only when pciehp is not
enabled to avoid issuing two hotplug commands too close together
(Feng Tang)
- Skip pciehp 'device replaced' check if the device has been removed
to address a deadlock when resuming after a device was removed
during system sleep (Lukas Wunner)
- Don't enable pciehp hotplug interupt when resuming in poll mode
(Ilpo Järvinen)
Virtualization:
- Fix bugs in 'pci=config_acs=' kernel command line parameter (Tushar
Dave)
DOE:
- Expose supported DOE features via sysfs (Alistair Francis)
- Allow DOE support to be enabled even if CXL isn't enabled (Alistair
Francis)
Endpoint framework:
- Convert PCI device data so pci-epf-test works correctly on
big-endian endpoint systems (Niklas Cassel)
- Add BAR_RESIZABLE type to endpoint framework and add DWC core
support for EPF drivers to set BAR_RESIZABLE type and size (Niklas
Cassel)
- Fix pci-epf-test double free that causes an oops if the host
reboots and PERST# deassertion restarts endpoint BAR allocation
(Christian Bruel)
- Fix endpoint BAR testing so tests can skip disabled BARs instead of
reporting them as failures (Niklas Cassel)
- Widen endpoint test BAR size variable to accommodate BARs larger
than INT_MAX (Niklas Cassel)
- Remove unused tools 'pci' build target left over after moving tests
to tools/testing/selftests/pci_endpoint (Jianfeng Liu)
Altera PCIe controller driver:
- Add DT binding and driver support for Agilex family (P-Tile,
F-Tile, R-Tile) (Matthew Gerlach and D M, Sharath Kumar)
AMD MDB PCIe controller driver:
- Add DT binding and driver for AMD MDB (Multimedia DMA Bridge)
(Thippeswamy Havalige)
Broadcom STB PCIe controller driver:
- Add BCM2712 MSI-X DT binding and interrupt controller drivers and
add softdep on irq_bcm2712_mip driver to ensure that it is loaded
first (Stanimir Varbanov)
- Expand inbound window map to 64GB so it can accommodate BCM2712
(Stanimir Varbanov)
- Add BCM2712 support and DT updates (Stanimir Varbanov)
- Apply link speed restriction before bringing link up, not after
(Jim Quinlan)
- Update Max Link Speed in Link Capabilities via the internal
writable register, not the read-only config register (Jim Quinlan)
- Handle regulator_bulk_get() error to avoid panic when we call
regulator_bulk_free() later (Jim Quinlan)
- Disable regulators only when removing the bus immediately below a
Root Port because we don't support regulators deeper in the
hierarchy (Jim Quinlan)
- Make const read-only arrays static (Colin Ian King)
Cadence PCIe endpoint driver:
- Correct MSG TLP generation so endpoints can generate INTx messages
(Hans Zhang)
Freescale i.MX6 PCIe controller driver:
- Identify the second controller on i.MX8MQ based on devicetree
'linux,pci-domain' instead of DBI 'reg' address (Richard Zhu)
- Remove imx_pcie_cpu_addr_fixup() since dwc core can now derive the
ATU input address (using parent_bus_offset) from devicetree (Frank
Li)
Freescale Layerscape PCIe controller driver:
- Drop deprecated 'num-ib-windows' and 'num-ob-windows' and
unnecessary 'status' from example (Krzysztof Kozlowski)
- Correct the syscon_regmap_lookup_by_phandle_args("fsl,pcie-scfg")
arg_count to fix probe failure on LS1043A (Ioana Ciornei)
HiSilicon STB PCIe controller driver:
- Call phy_exit() to clean up if histb_pcie_probe() fails (Christophe
JAILLET)
Intel Gateway PCIe controller driver:
- Remove intel_pcie_cpu_addr() since dwc core can now derive the ATU
input address (using parent_bus_offset) from devicetree (Frank Li)
Intel VMD host bridge driver:
- Convert vmd_dev.cfg_lock from spinlock_t to raw_spinlock_t so
pci_ops.read() will never sleep, even on PREEMPT_RT where
spinlock_t becomes a sleepable lock, to avoid calling a sleeping
function from invalid context (Ryo Takakura)
MediaTek PCIe Gen3 controller driver:
- Remove leftover mac_reset assert for Airoha EN7581 SoC (Lorenzo
Bianconi)
- Add EN7581 PBUS controller 'mediatek,pbus-csr' DT property and
program host bridge memory aperture to this syscon node (Lorenzo
Bianconi)
Qualcomm PCIe controller driver:
- Add qcom,pcie-ipq5332 binding (Varadarajan Narayanan)
- Add qcom i.MX8QM and i.MX8QXP/DXP optional DMA interrupt (Alexander
Stein)
- Add optional dma-coherent DT property for Qualcomm SA8775P (Dmitry
Baryshkov)
- Make DT iommu property required for SA8775P and prohibited for
SDX55 (Dmitry Baryshkov)
- Add DT IOMMU and DMA-related properties for Qualcomm SM8450 (Dmitry
Baryshkov)
- Add endpoint DT properties for SAR2130P and enable endpoint mode in
driver (Dmitry Baryshkov)
- Describe endpoint BAR0 and BAR2 as 64-bit only and BAR1 and BAR3 as
RESERVED (Manivannan Sadhasivam)
Rockchip DesignWare PCIe controller driver:
- Describe rk3568 and rk3588 BARs as Resizable, not Fixed (Niklas
Cassel)
Synopsys DesignWare PCIe controller driver:
- Add debugfs-based Silicon Debug, Error Injection, Statistical
Counter support for DWC (Shradha Todi)
- Add debugfs property to expose LTSSM status of DWC PCIe link (Hans
Zhang)
- Add Rockchip support for DWC debugfs features (Niklas Cassel)
- Add dw_pcie_parent_bus_offset() to look up the parent bus address
of a specified 'reg' property and return the offset from the CPU
physical address (Frank Li)
- Use dw_pcie_parent_bus_offset() to derive CPU -> ATU addr offset
via 'reg[config]' for host controllers and 'reg[addr_space]' for
endpoint controllers (Frank Li)
- Apply struct dw_pcie.parent_bus_offset in ATU users to remove use
of .cpu_addr_fixup() when programming ATU (Frank Li)
TI J721E PCIe driver:
- Correct the 'link down' interrupt bit for J784S4 (Siddharth
Vadapalli)
TI Keystone PCIe controller driver:
- Describe AM65x BARs 2 and 5 as Resizable (not Fixed) and reduce
alignment requirement from 1MB to 64KB (Niklas Cassel)
Xilinx Versal CPM PCIe controller driver:
- Free IRQ domain in probe error path to avoid leaking it
(Thippeswamy Havalige)
- Add DT .compatible "xlnx,versal-cpm5nc-host" and driver support for
Versal Net CPM5NC Root Port controller (Thippeswamy Havalige)
- Add driver support for CPM5_HOST1 (Thippeswamy Havalige)
Miscellaneous:
- Convert fsl,mpc83xx-pcie binding to YAML (J. Neuschäfer)
- Use for_each_available_child_of_node_scoped() to simplify apple,
kirin, mediatek, mt7621, tegra drivers (Zhang Zekun)"
* tag 'pci-v6.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (197 commits)
PCI: layerscape: Fix arg_count to syscon_regmap_lookup_by_phandle_args()
PCI: j721e: Fix the value of .linkdown_irq_regfield for J784S4
misc: pci_endpoint_test: Add support for PCITEST_IRQ_TYPE_AUTO
PCI: endpoint: pci-epf-test: Expose supported IRQ types in CAPS register
PCI: dw-rockchip: Endpoint mode cannot raise INTx interrupts
PCI: endpoint: Add intx_capable to epc_features struct
dt-bindings: PCI: Add common schema for devices accessible through PCI BARs
PCI: intel-gw: Remove intel_pcie_cpu_addr()
PCI: imx6: Remove imx_pcie_cpu_addr_fixup()
PCI: dwc: Use parent_bus_offset to remove need for .cpu_addr_fixup()
PCI: dwc: ep: Ensure proper iteration over outbound map windows
PCI: dwc: ep: Use devicetree 'reg[addr_space]' to derive CPU -> ATU addr offset
PCI: dwc: ep: Consolidate devicetree handling in dw_pcie_ep_get_resources()
PCI: dwc: ep: Call epc_create() early in dw_pcie_ep_init()
PCI: dwc: Use devicetree 'reg[config]' to derive CPU -> ATU addr offset
PCI: dwc: Add dw_pcie_parent_bus_offset() checking and debug
PCI: dwc: Add dw_pcie_parent_bus_offset()
PCI/bwctrl: Fix NULL pointer dereference on bus number exhaustion
PCI: xilinx-cpm: Add cpm_csr register mapping for CPM5_HOST1 variant
PCI: brcmstb: Make const read-only arrays static
...
|
|
Pull lsm updates from Paul Moore:
- Various minor updates to the LSM Rust bindings
Changes include marking trivial Rust bindings as inlines and comment
tweaks to better reflect the LSM hooks.
- Add LSM/SELinux access controls to io_uring_allowed()
Similar to the io_uring_disabled sysctl, add a LSM hook to
io_uring_allowed() to enable LSMs a simple way to enforce security
policy on the use of io_uring. This pull request includes SELinux
support for this new control using the io_uring/allowed permission.
- Remove an unused parameter from the security_perf_event_open() hook
The perf_event_attr struct parameter was not used by any currently
supported LSMs, remove it from the hook.
- Add an explicit MAINTAINERS entry for the credentials code
We've seen problems in the past where patches to the credentials code
sent by non-maintainers would often languish on the lists for
multiple months as there was no one explicitly tasked with the
responsibility of reviewing and/or merging credentials related code.
Considering that most of the code under security/ has a vested
interest in ensuring that the credentials code is well maintained,
I'm volunteering to look after the credentials code and Serge Hallyn
has also volunteered to step up as an official reviewer. I posted the
MAINTAINERS update as a RFC to LKML in hopes that someone else would
jump up with an "I'll do it!", but beyond Serge it was all crickets.
- Update Stephen Smalley's old email address to prevent confusion
This includes a corresponding update to the mailmap file.
* tag 'lsm-pr-20250323' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
mailmap: map Stephen Smalley's old email addresses
lsm: remove old email address for Stephen Smalley
MAINTAINERS: add Serge Hallyn as a credentials reviewer
MAINTAINERS: add an explicit credentials entry
cred,rust: mark Credential methods inline
lsm,rust: reword "destroy" -> "release" in SecurityCtx
lsm,rust: mark SecurityCtx methods inline
perf: Remove unnecessary parameter of security check
lsm: fix a missing security_uring_allowed() prototype
io_uring,lsm,selinux: add LSM hooks for io_uring_setup()
io_uring: refactor io_uring_allowed()
|
|
Pull kvm updates from Paolo Bonzini:
"ARM:
- Nested virtualization support for VGICv3, giving the nested
hypervisor control of the VGIC hardware when running an L2 VM
- Removal of 'late' nested virtualization feature register masking,
making the supported feature set directly visible to userspace
- Support for emulating FEAT_PMUv3 on Apple silicon, taking advantage
of an IMPLEMENTATION DEFINED trap that covers all PMUv3 registers
- Paravirtual interface for discovering the set of CPU
implementations where a VM may run, addressing a longstanding issue
of guest CPU errata awareness in big-little systems and
cross-implementation VM migration
- Userspace control of the registers responsible for identifying a
particular CPU implementation (MIDR_EL1, REVIDR_EL1, AIDR_EL1),
allowing VMs to be migrated cross-implementation
- pKVM updates, including support for tracking stage-2 page table
allocations in the protected hypervisor in the 'SecPageTable' stat
- Fixes to vPMU, ensuring that userspace updates to the vPMU after
KVM_RUN are reflected into the backing perf events
LoongArch:
- Remove unnecessary header include path
- Assume constant PGD during VM context switch
- Add perf events support for guest VM
RISC-V:
- Disable the kernel perf counter during configure
- KVM selftests improvements for PMU
- Fix warning at the time of KVM module removal
x86:
- Add support for aging of SPTEs without holding mmu_lock.
Not taking mmu_lock allows multiple aging actions to run in
parallel, and more importantly avoids stalling vCPUs. This includes
an implementation of per-rmap-entry locking; aging the gfn is done
with only a per-rmap single-bin spinlock taken, whereas locking an
rmap for write requires taking both the per-rmap spinlock and the
mmu_lock.
Note that this decreases slightly the accuracy of accessed-page
information, because changes to the SPTE outside aging might not
use atomic operations even if they could race against a clear of
the Accessed bit.
This is deliberate because KVM and mm/ tolerate false
positives/negatives for accessed information, and testing has shown
that reducing the latency of aging is far more beneficial to
overall system performance than providing "perfect" young/old
information.
- Defer runtime CPUID updates until KVM emulates a CPUID instruction,
to coalesce updates when multiple pieces of vCPU state are
changing, e.g. as part of a nested transition
- Fix a variety of nested emulation bugs, and add VMX support for
synthesizing nested VM-Exit on interception (instead of injecting
#UD into L2)
- Drop "support" for async page faults for protected guests that do
not set SEND_ALWAYS (i.e. that only want async page faults at CPL3)
- Bring a bit of sanity to x86's VM teardown code, which has
accumulated a lot of cruft over the years. Particularly, destroy
vCPUs before the MMU, despite the latter being a VM-wide operation
- Add common secure TSC infrastructure for use within SNP and in the
future TDX
- Block KVM_CAP_SYNC_REGS if guest state is protected. It does not
make sense to use the capability if the relevant registers are not
available for reading or writing
- Don't take kvm->lock when iterating over vCPUs in the suspend
notifier to fix a largely theoretical deadlock
- Use the vCPU's actual Xen PV clock information when starting the
Xen timer, as the cached state in arch.hv_clock can be stale/bogus
- Fix a bug where KVM could bleed PVCLOCK_GUEST_STOPPED across
different PV clocks; restrict PVCLOCK_GUEST_STOPPED to kvmclock, as
KVM's suspend notifier only accounts for kvmclock, and there's no
evidence that the flag is actually supported by Xen guests
- Clean up the per-vCPU "cache" of its reference pvclock, and instead
only track the vCPU's TSC scaling (multipler+shift) metadata (which
is moderately expensive to compute, and rarely changes for modern
setups)
- Don't write to the Xen hypercall page on MSR writes that are
initiated by the host (userspace or KVM) to fix a class of bugs
where KVM can write to guest memory at unexpected times, e.g.
during vCPU creation if userspace has set the Xen hypercall MSR
index to collide with an MSR that KVM emulates
- Restrict the Xen hypercall MSR index to the unofficial synthetic
range to reduce the set of possible collisions with MSRs that are
emulated by KVM (collisions can still happen as KVM emulates
Hyper-V MSRs, which also reside in the synthetic range)
- Clean up and optimize KVM's handling of Xen MSR writes and
xen_hvm_config
- Update Xen TSC leaves during CPUID emulation instead of modifying
the CPUID entries when updating PV clocks; there is no guarantee PV
clocks will be updated between TSC frequency changes and CPUID
emulation, and guest reads of the TSC leaves should be rare, i.e.
are not a hot path
x86 (Intel):
- Fix a bug where KVM unnecessarily reads XFD_ERR from hardware and
thus modifies the vCPU's XFD_ERR on a #NM due to CR0.TS=1
- Pass XFD_ERR as the payload when injecting #NM, as a preparatory
step for upcoming FRED virtualization support
- Decouple the EPT entry RWX protection bit macros from the EPT
Violation bits, both as a general cleanup and in anticipation of
adding support for emulating Mode-Based Execution Control (MBEC)
- Reject KVM_RUN if userspace manages to gain control and stuff
invalid guest state while KVM is in the middle of emulating nested
VM-Enter
- Add a macro to handle KVM's sanity checks on entry/exit VMCS
control pairs in anticipation of adding sanity checks for secondary
exit controls (the primary field is out of bits)
x86 (AMD):
- Ensure the PSP driver is initialized when both the PSP and KVM
modules are built-in (the initcall framework doesn't handle
dependencies)
- Use long-term pins when registering encrypted memory regions, so
that the pages are migrated out of MIGRATE_CMA/ZONE_MOVABLE and
don't lead to excessive fragmentation
- Add macros and helpers for setting GHCB return/error codes
- Add support for Idle HLT interception, which elides interception if
the vCPU has a pending, unmasked virtual IRQ when HLT is executed
- Fix a bug in INVPCID emulation where KVM fails to check for a
non-canonical address
- Don't attempt VMRUN for SEV-ES+ guests if the vCPU's VMSA is
invalid, e.g. because the vCPU was "destroyed" via SNP's AP
Creation hypercall
- Reject SNP AP Creation if the requested SEV features for the vCPU
don't match the VM's configured set of features
Selftests:
- Fix again the Intel PMU counters test; add a data load and do
CLFLUSH{OPT} on the data instead of executing code. The theory is
that modern Intel CPUs have learned new code prefetching tricks
that bypass the PMU counters
- Fix a flaw in the Intel PMU counters test where it asserts that an
event is counting correctly without actually knowing what the event
counts on the underlying hardware
- Fix a variety of flaws, bugs, and false failures/passes
dirty_log_test, and improve its coverage by collecting all dirty
entries on each iteration
- Fix a few minor bugs related to handling of stats FDs
- Add infrastructure to make vCPU and VM stats FDs available to tests
by default (open the FDs during VM/vCPU creation)
- Relax an assertion on the number of HLT exits in the xAPIC IPI test
when running on a CPU that supports AMD's Idle HLT (which elides
interception of HLT if a virtual IRQ is pending and unmasked)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (216 commits)
RISC-V: KVM: Optimize comments in kvm_riscv_vcpu_isa_disable_allowed
RISC-V: KVM: Teardown riscv specific bits after kvm_exit
LoongArch: KVM: Register perf callbacks for guest
LoongArch: KVM: Implement arch-specific functions for guest perf
LoongArch: KVM: Add stub for kvm_arch_vcpu_preempted_in_kernel()
LoongArch: KVM: Remove PGD saving during VM context switch
LoongArch: KVM: Remove unnecessary header include path
KVM: arm64: Tear down vGIC on failed vCPU creation
KVM: arm64: PMU: Reload when resetting
KVM: arm64: PMU: Reload when user modifies registers
KVM: arm64: PMU: Fix SET_ONE_REG for vPMC regs
KVM: arm64: PMU: Assume PMU presence in pmu-emul.c
KVM: arm64: PMU: Set raw values from user to PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR}
KVM: arm64: Create each pKVM hyp vcpu after its corresponding host vcpu
KVM: arm64: Factor out pKVM hyp vcpu creation to separate function
KVM: arm64: Initialize HCRX_EL2 traps in pKVM
KVM: arm64: Factor out setting HCRX_EL2 traps into separate function
KVM: x86: block KVM_CAP_SYNC_REGS if guest state is protected
KVM: x86: Add infrastructure for secure TSC
KVM: x86: Push down setting vcpu.arch.user_set_tsc
...
|
|
Pull arm64 updates from Catalin Marinas:
"Nothing major this time around.
Apart from the usual perf/PMU updates, some page table cleanups, the
notable features are average CPU frequency based on the AMUv1
counters, CONFIG_HOTPLUG_SMT and MOPS instructions (memcpy/memset) in
the uaccess routines.
Perf and PMUs:
- Support for the 'Rainier' CPU PMU from Arm
- Preparatory driver changes and cleanups that pave the way for BRBE
support
- Support for partial virtualisation of the Apple-M1 PMU
- Support for the second event filter in Arm CSPMU designs
- Minor fixes and cleanups (CMN and DWC PMUs)
- Enable EL2 requirements for FEAT_PMUv3p9
Power, CPU topology:
- Support for AMUv1-based average CPU frequency
- Run-time SMT control wired up for arm64 (CONFIG_HOTPLUG_SMT). It
adds a generic topology_is_primary_thread() function overridden by
x86 and powerpc
New(ish) features:
- MOPS (memcpy/memset) support for the uaccess routines
Security/confidential compute:
- Fix the DMA address for devices used in Realms with Arm CCA. The
CCA architecture uses the address bit to differentiate between
shared and private addresses
- Spectre-BHB: assume CPUs Linux doesn't know about vulnerable by
default
Memory management clean-ups:
- Drop the P*D_TABLE_BIT definition in preparation for 128-bit PTEs
- Some minor page table accessor clean-ups
- PIE/POE (permission indirection/overlay) helpers clean-up
Kselftests:
- MTE: skip hugetlb tests if MTE is not supported on such mappings
and user correct naming for sync/async tag checking modes
Miscellaneous:
- Add a PKEY_UNRESTRICTED definition as 0 to uapi (toolchain people
request)
- Sysreg updates for new register fields
- CPU type info for some Qualcomm Kryo cores"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (72 commits)
arm64: mm: Don't use %pK through printk
perf/arm_cspmu: Fix missing io.h include
arm64: errata: Add newer ARM cores to the spectre_bhb_loop_affected() lists
arm64: cputype: Add MIDR_CORTEX_A76AE
arm64: errata: Add KRYO 2XX/3XX/4XX silver cores to Spectre BHB safe list
arm64: errata: Assume that unknown CPUs _are_ vulnerable to Spectre BHB
arm64: errata: Add QCOM_KRYO_4XX_GOLD to the spectre_bhb_k24_list
arm64/sysreg: Enforce whole word match for open/close tokens
arm64/sysreg: Fix unbalanced closing block
arm64: Kconfig: Enable HOTPLUG_SMT
arm64: topology: Support SMT control on ACPI based system
arch_topology: Support SMT control for OF based system
cpu/SMT: Provide a default topology_is_primary_thread()
arm64/mm: Define PTDESC_ORDER
perf/arm_cspmu: Add PMEVFILT2R support
perf/arm_cspmu: Generalise event filtering
perf/arm_cspmu: Move register definitons to header
arm64/kernel: Always use level 2 or higher for early mappings
arm64/mm: Drop PXD_TABLE_BIT
arm64/mm: Check pmd_table() in pmd_trans_huge()
...
|
|
Adding the writel() calls needs io.h, which apparently gets
transiently included somewhere on arm64, but not elsewhere.
Fixes: 6de0298a3925 ("perf/arm_cspmu: Generalise event filtering")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202503150649.Dol8RBSh-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202503152245.cAG4FMfi-lkp@intel.com/
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/657935ca177024ad08d5ec6f85e8faf75f82cf65.1742212833.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Architecturally we have two filters for each regular event counter,
so add generic support for the second one too.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Link: https://lore.kernel.org/r/b11be3f23a72bc27088b115099c8fe865b70babc.1741190362.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The notion of a single u32 filter value for any event doesn't scale well
when the potential architectural scope is already two 64-bit values, and
implementations may add custom stuff on the side too. Rather than try to
thread arbitrary filter data through the common path, let's just make
the set_ev_filter op self-contained in terms of parsing and configuring
any and all filtering for the given event - splitting out a distinct op
for cycles events which inherently differ - and let implementations
override the whole thing if they want to do something different. This
already allows the Ampere code to stop looking a bit hacky.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Link: https://lore.kernel.org/r/c0cd4d4c12566dbf1b062ccd60241b3e0639f4cc.1741190362.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Implementations may occasionally want to refer to register offsets, so
for the sake of consistency move all of the register definitions to join
the PMIIDR fields in the private header where they can be shared. As an
example nicety, we can then define Ampere's imp-def filters in terms of
the architectural PMIMPDEF range rather than open-coded offsets.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Link: https://lore.kernel.org/r/5a3c796560665b51cb63fec0d473afd8f8d0a836.1741190362.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Pull Apple-M1 PMU driver changes from Oliver Upton, which form a prefix
of the series in the KVM/Arm tree that allows the PMU to be virtualised.
Sort of, anyway.
* 'perf/m1-guest-events' of git://git.kernel.org/pub/scm/linux/kernel/git/oupton/linux:
drivers/perf: apple_m1: Support host/guest event filtering
drivers/perf: apple_m1: Refactor event select/filter configuration
|
|
Apple M* parts carry some IMP DEF traps for guest accesses to PMUv3
registers, even though the underlying hardware doesn't implement PMUv3.
This means it is possible to virtualize PMUv3 for KVM guests.
Add a helper for mapping common PMUv3 event IDs onto hardware event IDs,
keeping the implementation-specific crud in the PMU driver rather than
KVM proper. Populate the pmceid_bitmap based on the supported events so
KVM can provide synthetic PMCEID* values to the guest.
Tested-by: Janne Grunau <j@jannau.net>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250305202641.428114-13-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
The PMU appears to have a separate register for filtering 'guest'
exception levels (i.e. EL1 and !ELIsInHost(EL0)) which has the same
layout as PMCR1_EL1. Conveniently, there exists a VHE register alias
(PMCR1_EL12) that can be used to configure it.
Support guest events by programming the EL12 register with the intended
guest kernel/userspace filters. Limit support for guest events to VHE
(i.e. kernel running at EL2), as it avoids involving KVM to context
switch PMU registers. VHE is the only supported mode on M* parts anyway,
so this isn't an actual feature limitation.
Tested-by: Janne Grunau <j@jannau.net>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250305202641.428114-3-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Supporting guest mode events will necessitate programming two event
filters. Prepare by splitting up the programming of the event selector +
event filter into separate headers.
Opportunistically replace RMW patterns with sysreg_clear_set_s().
Tested-by: Janne Grunau <j@jannau.net>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250305202641.428114-2-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Move the common DWC struct definitions, which are shared across all the
DesginWare PCIe IPs, to a new header file called 'pcie-dwc.h', so that
other users e.g., debugfs, perf and sysfs can make use of them.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Shradha Todi <shradha.t@samsung.com>
Reviewed-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Tested-by: Hrishikesh Deleep <hrishikesh.d@samsung.com>
Link: https://lore.kernel.org/r/20250221131548.59616-2-shradha.t@samsung.com
[kwilczynski: commit log, tidy up the new header file]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
During platform_device_register, wrongly using struct device
pci_dev as platform_data caused a kmemdup copy of pci_dev. Worse
still, accessing the duplicated device leads to list corruption as its
mutex content (e.g., list, magic) remains the same as the original.
Signed-off-by: Yunhui Cui <cuiyunhui@bytedance.com>
Reviewed-by: Shuai Xue <xueshuai@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250220121716.50324-3-cuiyunhui@bytedance.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Release leaked resources, such as plat_dev and dev_info.
Signed-off-by: Yunhui Cui <cuiyunhui@bytedance.com>
Reviewed-by: Shuai Xue <xueshuai@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250220121716.50324-2-cuiyunhui@bytedance.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
While handling RN-D nodes under the functionally-identical RN-I type
works fine for perf tool users using the "rnid_" event aliases, and that
is the documented and expected ABI, there's little reason not to be
permissive and accept the actual RN-D type as an additional encoding for
the same events as well. This may be convenient for other tooling
generating event configs directly from its own topology data.
In the RN-I event mood, it also seems as good a time as any to clean up
a forgotten macro for CCLA_RNI events which ended up being unnecessary.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Link: https://lore.kernel.org/r/ef46a47fc4ab909093f14b2b4289a4835836ab6c.1738851844.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Currently m1_pmu_enable_event() starts by disabling the event counter
it has been asked to enable. This should not be necessary as the
counter (and the PMU as a whole) should not be active when
m1_pmu_enable_event() is called.
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Tested-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250218-arm-brbe-v19-v20-6-4e9922fc2e8e@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Currently (armv7|krait_|scorpion_)pmu_enable_event() start by disabling
the event counter it has been asked to enable. This should not be
necessary as the counter (and the PMU as a whole) should not be active
when *_enable_event() is called.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Tested-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250218-arm-brbe-v19-v20-5-4e9922fc2e8e@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The function calls for enabling/disabling counters and interrupts are
pretty obvious as to what they are doing, and the comments don't add
any additional value.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Tested-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250218-arm-brbe-v19-v20-4-4e9922fc2e8e@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Currently armv8pmu_enable_event() starts by disabling the event counter
it has been asked to enable. This should not be necessary as the counter
(and the PMU as a whole) should not be active when
armv8pmu_enable_event() is called.
Remove the redundant call to armv8pmu_disable_event_counter(). At the
same time, remove the comment immeditately above as everything it says
is obvious from the function names below.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Tested-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250218-arm-brbe-v19-v20-3-4e9922fc2e8e@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Currently armpmu_add() tries to handle a newly-allocated counter having
a stale associated event, but this should not be possible, and if this
were to happen the current mitigation is insufficient and potentially
expensive. It would be better to warn if we encounter the impossible
case.
Calls to pmu::add() and pmu::del() are serialized by the core perf code,
and armpmu_del() clears the relevant slot in pmu_hw_events::events[]
before clearing the bit in pmu_hw_events::used_mask such that the
counter can be reallocated. Thus when armpmu_add() allocates a counter
index from pmu_hw_events::used_mask, it should not be possible to observe
a stale even in pmu_hw_events::events[] unless either
pmu_hw_events::used_mask or pmu_hw_events::events[] have been corrupted.
If this were to happen, we'd end up with two events with the same
event->hw.idx, which would clash with each other during reprogramming,
deletion, etc, and produce bogus results. Add a WARN_ON_ONCE() for this
case so that we can detect if this ever occurs in practice.
That possiblity aside, there's no need to call arm_pmu::disable(event)
for the new event. The PMU reset code initialises the counter in a
disabled state, and armpmu_del() will disable the counter before it can
be reused. Remove the redundant disable.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Tested-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250218-arm-brbe-v19-v20-2-4e9922fc2e8e@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Counting events related to setup of the PMU is not desired, but
kvm_vcpu_pmu_resync_el0() is called just after the PMU counters have
been enabled. Move the call to before enabling the counters.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Tested-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250218-arm-brbe-v19-v20-1-4e9922fc2e8e@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add support for the ARM Rainier CPU core PMU.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250221180349.1413089-7-vincenzo.frascino@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
It seems that the attr parameter was never been used in security
checks since it was first introduced by:
commit da97e18458fb ("perf_event: Add support for LSM and SELinux checks")
so remove it.
Signed-off-by: Luo Gengkun <luogengkun@huaweicloud.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Patch was created by using Coccinelle.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://lore.kernel.org/all/471ea3b829d14a4b4c3c7814dbe1ed13b15d47b8.1738746904.git.namcao@linutronix.de
|
|
Add the const qualifier to all the ctl_tables in the tree except for
watchdog_hardlockup_sysctl, memory_allocation_profiling_sysctls,
loadpin_sysctl_table and the ones calling register_net_sysctl (./net,
drivers/inifiniband dirs). These are special cases as they use a
registration function with a non-const qualified ctl_table argument or
modify the arrays before passing them on to the registration function.
Constifying ctl_table structs will prevent the modification of
proc_handler function pointers as the arrays would reside in .rodata.
This is made possible after commit 78eb4ea25cd5 ("sysctl: treewide:
constify the ctl_table argument of proc_handlers") constified all the
proc_handlers.
Created this by running an spatch followed by a sed command:
Spatch:
virtual patch
@
depends on !(file in "net")
disable optional_qualifier
@
identifier table_name != {
watchdog_hardlockup_sysctl,
iwcm_ctl_table,
ucma_ctl_table,
memory_allocation_profiling_sysctls,
loadpin_sysctl_table
};
@@
+ const
struct ctl_table table_name [] = { ... };
sed:
sed --in-place \
-e "s/struct ctl_table .table = &uts_kern/const struct ctl_table *table = \&uts_kern/" \
kernel/utsname_sysctl.c
Reviewed-by: Song Liu <song@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> # for kernel/trace/
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> # SCSI
Reviewed-by: Darrick J. Wong <djwong@kernel.org> # xfs
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Bill O'Donnell <bodonnel@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Acked-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Acked-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
Pull arm64 updates from Will Deacon:
"We've got a little less than normal thanks to the holidays in
December, but there's the usual summary below. The highlight is
probably the 52-bit physical addressing (LPA2) clean-up from Ard.
Confidential Computing:
- Register a platform device when running in CCA realm mode to enable
automatic loading of dependent modules
CPU Features:
- Update a bunch of system register definitions to pick up new field
encodings from the architectural documentation
- Add hwcaps and selftests for the new (2024) dpISA extensions
Documentation:
- Update EL3 (firmware) requirements for booting Linux on modern
arm64 designs
- Remove stale information about the kernel virtual memory map
Miscellaneous:
- Minor cleanups and typo fixes
Memory management:
- Fix vmemmap_check_pmd() to look at the PMD type bits
- LPA2 (52-bit physical addressing) cleanups and minor fixes
- Adjust physical address space depending upon whether or not LPA2 is
enabled
Perf and PMUs:
- Add port filtering support for NVIDIA's NVLINK-C2C Coresight PMU
- Extend AXI filtering support for the DDR PMU on NXP IMX SoCs
- Fix Designware PCIe PMU event numbering
- Add generic branch events for the Apple M1 CPU PMU
- Add support for Marvell Odyssey DDR and LLC-TAD PMUs
- Cleanups to the Hisilicon DDRC and Uncore PMU code
- Advertise discard mode for the SPE PMU
- Add the perf users mailing list to our MAINTAINERS entry"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (64 commits)
Documentation: arm64: Remove stale and redundant virtual memory diagrams
perf docs: arm_spe: Document new discard mode
perf: arm_spe: Add format option for discard mode
MAINTAINERS: Add perf list for drivers/perf/
arm64: Remove duplicate included header
drivers/perf: apple_m1: Map generic branch events
arm64: rsi: Add automatic arm-cca-guest module loading
kselftest/arm64: Add 2024 dpISA extensions to hwcap test
KVM: arm64: Allow control of dpISA extensions in ID_AA64ISAR3_EL1
arm64/hwcap: Describe 2024 dpISA extensions to userspace
arm64/sysreg: Update ID_AA64SMFR0_EL1 to DDI0601 2024-12
arm64: Filter out SVE hwcaps when FEAT_SVE isn't implemented
drivers/perf: hisi: Set correct IRQ affinity for PMUs with no association
arm64/sme: Move storage of reg_smidr to __cpuinfo_store_cpu()
arm64: mm: Test for pmd_sect() in vmemmap_check_pmd()
arm64/mm: Replace open encodings with PXD_TABLE_BIT
arm64/mm: Rename pte_mkpresent() as pte_mkvalid()
arm64/sysreg: Update ID_AA64ISAR2_EL1 to DDI0601 2024-09
arm64/sysreg: Update ID_AA64ZFR0_EL1 to DDI0601 2024-09
arm64/sysreg: Update ID_AA64FPFR0_EL1 to DDI0601 2024-09
...
|
|
FEAT_SPEv1p2 (optional from Armv8.6) adds a discard mode that allows all
SPE data to be discarded rather than written to memory. Add a format
bit for this mode.
If the mode isn't supported, the format bit isn't published and attempts
to use it will result in -EOPNOTSUPP. Allocating an aux buffer is still
allowed even though it won't be written to so that old tools continue to
work, but updated tools can choose to skip this step.
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewd-by: Yeoreum Yun <yeoreum.yun@arm.com>
Link: https://lore.kernel.org/r/20250108142904.401139-2-james.clark@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Map the generic perf events for branch prediction stats to the
corresponding hardware events.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Tested-by: Janne Grunau <j@jannau.net>
Link: https://lore.kernel.org/r/20241217212048.3709204-4-oliver.upton@linux.dev
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Atish Patra <atishp@rivosinc.com> says:
Here are two minor improvement/fixes in the PMU event path. The first patch
was part of the series[1]. The 2nd patch was suggested during the series
review.
While the series can only be merged once SBI v3.0 is frozen, these two
patches can be independent of SBI v3.0 and can be merged sooner. Hence, these
two patches are sent as a separate series.
* b4-shazam-merge:
drivers/perf: riscv: Do not allow invalid raw event config
drivers/perf: riscv: Return error for default case
drivers/perf: riscv: Fix Platform firmware event data
Link: https://lore.kernel.org/r/20241212-pmu_event_fixes_v2-v2-0-813e8a4f5962@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The SBI specification allows only lower 48bits of hpmeventX to be
configured via SBI PMU. Currently, the driver masks of the higher
bits but doesn't return an error. This will lead to an additional
SBI call for config matching which should return for an invalid
event error in most of the cases.
However, if a platform(i.e Rocket and sifive cores) implements a
bitmap of all bits in the event encoding this will lead to an
incorrect event being programmed leading to user confusion.
Report the error to the user if higher bits are set during the
event mapping itself to avoid the confusion and save an additional
SBI call.
Suggested-by: Samuel Holland <samuel.holland@sifive.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20241212-pmu_event_fixes_v2-v2-3-813e8a4f5962@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
If the upper two bits has an invalid valid (0x1), the event mapping
is not reliable as it returns an uninitialized variable.
Return appropriate value for the default case.
Fixes: f0c9363db2dd ("perf/riscv-sbi: Add platform specific firmware event handling")
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20241212-pmu_event_fixes_v2-v2-2-813e8a4f5962@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Platform firmware event data field is allowed to be 62 bits for
Linux as uppper most two bits are reserved to indicate SBI fw or
platform specific firmware events.
However, the event data field is masked as per the hardware raw
event mask which is not correct.
Fix the platform firmware event data field with proper mask.
Fixes: f0c9363db2dd ("perf/riscv-sbi: Add platform specific firmware event handling")
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20241212-pmu_event_fixes_v2-v2-1-813e8a4f5962@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
For PMUs with no association, the hisi_pmu->on_cpu is initialized
according to the NUMA locality but use a wrong CPU for the interrupt
affinity. The CPU selected from cpumask_local_spread() can be different
from the CPU by the cpuhp callback. Fix this by setting the IRQ affinity
to hisi_pmu->on_cpu.
Fixes: 6cd137088fdf ("drivers/perf: hisi: Refactor the detection of associated CPUs")
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20241223125134.57885-1-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The imx93 is the first supported DDR PMU that supports read transaction,
write transaction and read beats events which corresponding respecitively
to counter 2, 3 and 4.
However, transaction-based AXI match has low accuracy when get total bits
compared to beats-based. And imx93 doesn't assign AXI_ID to each master.
So axi filter is not used widely on imx93. This could be regards as AXI
filter version 1.
To improve the AXI filter capability, imx95 supports 1 read beats and 3
write beats event which corresponding respecitively to counter 2-5. imx95
also detailed AXI_ID allocation so that most of the master could be count
individually. This could be regards as AXI filter version 2.
This will introduce AXI filter version to refactor the driver and support
better extension, such as coming imx943. This is also a potential fix on
imx91 when configure axi filter.
Fixes: 44798fe136dc ("perf: imx_perf: add support for i.MX91 platform")
Cc: stable@vger.kernel.org
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20241212065708.1353513-1-xu.yang_2@nxp.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The group validation logic still somewhat assumes the original CMN-600
case of events counting globally, such that if one tries to group 9
events where the first 8 target a single DTC domain, the 9th will be
rejected because *a* DTC domain is full, even though it might only
target other non-overlapping domains and thus still be schedulable.
Improve matters by only counting the DTCs that the new event actually
needs (as arm_cmn_val_add_event() was already clever enough to do).
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-and-tested-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Link: https://lore.kernel.org/r/bdfd1e58dac449e407c5cacfd6bf8577dc0a5899.1733943898.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
PCI Vendor-Specific (VSEC) Capabilities are defined by each vendor.
Devices from different vendors may advertise a VSEC Capability with the DWC
RAS DES functionality, but the vendors may assign different VSEC IDs.
Search for the DWC RAS DES Capability using the VSEC ID and VSEC Rev
chosen by the vendor.
This does not fix a current problem because Alibaba, Ampere, and Qualcomm
all assigned the same VSEC ID and VSEC Rev for the DWC RAS DES Capability.
The potential issue is that we may add support for a device from another
vendor, where the vendor has already assigned DWC_PCIE_VSEC_RAS_DES_ID
(0x02) for an unrelated VSEC. In that event, dwc_pcie_des_cap() would find
the unrelated VSEC and mistakenly assume it was a DWC RAS DES Capability.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-and-tested-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Reviewed-and-tested-by: Shuai Xue <xueshuai@linux.alibaba.com>
Link: https://lore.kernel.org/r/20241209222938.3219364-1-helgaas@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Do not add blank line at the end of a code block defined by braces.
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20241210141525.37788-11-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
In the callback function write_evtype(), the variable name of struct
hisi_pmu should be "ddrc_pmu" instead of "hha_pmu".
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20241210141525.37788-10-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
Linus Torvalds
Kan Liang
Robin Murphy
Anand Moon
Krzysztof Kozlowski
Hongbo Yao
Will Deacon
Oliver Upton
Manivannan Sadhasivam
Yunhui Cui
Rob Herring (Arm)
Mark Rutland
Vincenzo Frascino
Luo Gengkun
Nam Cao
Joel Granados
James Clark
Palmer Dabbelt
Atish Patra
Yicong Yang
Xu Yang
Bjorn Helgaas
Junhao He