| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull phy updates from Vinod Koul:
"As usual bunch of new device and driver support and updates to
existing drivers and addition of Manivannan to help with reviews.
New Support:
- Mediatek MT8196 DSI PHY support
- Renesas RZ/G3L usb2 support
- Qualcomm SM8475 QMP USB PHY and PCIe phy, IPQ9650 QMP PCIe PHY,
QUSB2 Phy for Shikra SoC, Hawi support for QMP PCIe phy and UFS
PHY. Glymur QMP PCIe Multi-PHY driver and multiple link-mode
support, ipq5210 PCIe phy support
- Spacemit USB3/PCIe comb PHY driver
Updates:
- Samsung hdptx driver improvements for modernizing the register
access and code cleanup
- Qualcomm drop duplicate v8 DP headers, improved runtime handling
for qmp drivers
- Rockchip clock lane phase tuning and 2500 Mbps support and TMDS
rate handling
- Freescale imx8mq improvements for runtime pm, pd handling"
* tag 'phy-for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (76 commits)
MAINTAINERS: Add Manivannan Sadhasivam as the Reviewer for Generic PHY Framework
phy: rockchip-samsung-dcphy: fix out-of-range max_register
phy: qcom: qmp-pcie: Add QMP PCIe Multi-PHY driver
dt-bindings: phy: qcom: Add Glymur QMP PCIe multiple link-mode PHY
phy: rockchip: samsung-hdptx: Consistently use bitfield macros
phy: rockchip: samsung-hdptx: Simplify GRF access with FIELD_PREP_WM16()
phy: rockchip: samsung-hdptx: Drop restrict_rate_change handling
phy: rockchip: samsung-hdptx: Consolidate consumer_put on error path
phy: rockchip: samsung-hdptx: Drop TMDS rate setup workaround
phy: rockchip: samsung-hdptx: Handle uncommitted PHY config changes
phy: rockchip: samsung-hdptx: Fix rate recalculation for 3.2GHz FRL
phy: rockchip: samsung-hdptx: Guard against clk rate integer underflow
phy: rockchip: samsung-hdptx: Prevent divide-by-zero when computing clk rate
phy: rockchip: samsung-hdptx: Fix rate recalculation for high bpc
phy: qcom: qmp-combo: Drop qmp_v4_calibrate_dp_phy
phy: qcom: qmp-combo: Correct pre-emphasis table for QMP v4 DP PHYs
phy: renesas: rcar-gen3-usb2: Ignore missing VBUS regulator
phy: qcom: qmp-pcie: Add support for SM8475 Gen3x1 PCIe0 port
phy: qcom: qmp-pcie: Add pcs_lane1 offset to V5 offsets
dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Add SM8475 QMP PHY
...
|
|
Linux 7.2
|
|
The PHY register block is 64KB, so with a register stride of 4 the
last accessible register sits at offset 0xfffc. max_register names
0x10000, one register past the end of the mapping: dumping the
registers through the regmap debugfs interface reads beyond the
ioremapped region and oopses on the unmapped page. The oops fires
with the regmap lock held, so later PHY operations deadlock.
Fixes: b2a1a2ae7818 ("phy: rockchip: Add Samsung MIPI D-/C-PHY driver")
Cc: stable@vger.kernel.org
Signed-off-by: Jason Yang <jason98166@gmail.com>
Assisted-by: Claude:claude-opus-5
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patch.msgid.link/20260811-dcphy-maxreg-v1-v1-1-aa63f6a63a64@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Make the code more robust and improve readability by using the available
bitfield macros (e.g. FIELD_PREP, FIELD_GET) whenever possible, instead
of open coding the related bit operations.
Tested-by: Thomas Niederprüm <dubito@online.de>
Tested-by: Simon Wright <simon@symple.nz>
Tested-by: Diederik de Haas <diederik@cknow-tech.com> # NanoPC-T6 LTS
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20260811-hdptx-clk-fixes-v6-10-75bca0ee5753@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The 16 most significant bits of the general-purpose register (GRF) are
used as a write-enable mask for the remaining 16 bits.
Make use of the recently introduced FIELD_PREP_WM16() macro to avoid
open-coding the bit shift operations and improve code readability.
Tested-by: Thomas Niederprüm <dubito@online.de>
Tested-by: Simon Wright <simon@symple.nz>
Tested-by: Diederik de Haas <diederik@cknow-tech.com> # NanoPC-T6 LTS
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20260811-hdptx-clk-fixes-v6-9-75bca0ee5753@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Since commit 6efbd0f46dd8 ("phy: rockchip: samsung-hdptx: Restrict
altering TMDS char rate via CCF"), adjusting the rate via the Common
Clock Framework API has been disallowed.
To avoid breaking existing users until switching to the PHY config API,
it introduced a temporary exception to the rule, controlled via the
'restrict_rate_change' flag.
As the API transition completed, remove the now deprecated exception
logic.
Tested-by: Thomas Niederprüm <dubito@online.de>
Tested-by: Simon Wright <simon@symple.nz>
Tested-by: Diederik de Haas <diederik@cknow-tech.com> # NanoPC-T6 LTS
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20260811-hdptx-clk-fixes-v6-8-75bca0ee5753@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
rk_hdptx_phy_consumer_put() is invoked in both branches of the mode
check conditional in rk_hdptx_phy_power_on() on the error path.
Simplify the code by moving the single call to the end of the
function.
No functional change intended.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20260811-hdptx-clk-fixes-v6-7-75bca0ee5753@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Since commit ba9c2fe18c17 ("drm/rockchip: dw_hdmi_qp: Switch to
phy_configure()") the TMDS rate setup doesn't rely anymore on the
unconventional usage of the bus width, instead it is managed exclusively
through the HDMI PHY configuration API.
Drop the now obsolete workaround to retrieve the TMDS character rate via
phy_get_bus_width() during power_on().
Tested-by: Thomas Niederprüm <dubito@online.de>
Tested-by: Simon Wright <simon@symple.nz>
Tested-by: Diederik de Haas <diederik@cknow-tech.com> # NanoPC-T6 LTS
Reviewed-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20260811-hdptx-clk-fixes-v6-6-75bca0ee5753@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Any changes to the PHY link rate and/or color depth done via the HDMI
PHY configuration API are not immediately programmed into the hardware,
but are delayed until the PHY usage count gets incremented from 0 to 1,
that is when it is powered on or when the PLL clock exposed through
the CCF API is prepared, whichever comes first.
Since the clock might remain in prepared state after subsequent PHY
config changes, the programming can also be triggered via
clk_ops.set_rate(). However, from the clock consumer perspective (i.e.
VOP2 display controller), the (pixel) clock rate doesn't vary with bpc,
as that is handled internally by the PHY and reflected in the TDMS
character rate only.
As a consequence, changing the bpc while preserving the modeline may
lead to out-of-sync issues between CCF and HDMI PHY config state,
because the .set_rate() callback is not invoked when clock rate remains
constant. This may also happen when the PHY PLL has been pre-programmed
by an external entity, e.g. the bootloader, which is actually a
regression introduced by the recent FRL-related changes.
Introduce a pll_config_dirty flag to keep track of uncommitted PHY
config changes and use it in clk_ops.determine_rate() to invalidate the
current clock rate (as known by CCF) and, consequently, ensure those
changes are programmed into hardware via clk_ops.set_rate().
Moreover, proceed with a similar fix in phy_ops.power_on() callback, to
handle the scenario where the CCF API is not used due to operating in
FRL mode, while the clock is still in a prepared state and thus
preventing rk_hdptx_phy_consumer_get() to apply the updated PHY
configuration.
Fixes: de5dba833118 ("phy: rockchip: samsung-hdptx: Add HDMI 2.1 FRL support")
Fixes: 9d0ec51d7c22 ("phy: rockchip: samsung-hdptx: Add high color depth management")
Tested-by: Thomas Niederprüm <dubito@online.de>
Tested-by: Simon Wright <simon@symple.nz>
Tested-by: Diederik de Haas <diederik@cknow-tech.com> # NanoPC-T6 LTS
Reviewed-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20260811-hdptx-clk-fixes-v6-5-75bca0ee5753@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
rk_hdptx_phy_clk_calc_rate_from_pll_cfg() is currently unable to handle
cascade mode for the 3.2GHz FRL operating mode, as it relies solely on
LCPLL_LCVCO_MODE_EN_MASK to determinate the rate from the
rk_hdptx_frl_lcpll_cfg array. Since there is no entry for this
particular rate, the function returns 0.
This is the only rate which requires LC_REF_CLK_SEL to be set in
GRF_HDPTX_CON0, hence extend the FRL matching accordingly.
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260611-hdptx-clk-fixes-v3-0-67b1b0c00e16@collabora.com?part=1
Fixes: de5dba833118 ("phy: rockchip: samsung-hdptx: Add HDMI 2.1 FRL support")
Tested-by: Diederik de Haas <diederik@cknow-tech.com> # NanoPC-T6 LTS
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20260811-hdptx-clk-fixes-v6-4-75bca0ee5753@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The 'fout' subtraction in rk_hdptx_phy_clk_calc_rate_from_pll_cfg()
could result in an integer underflow, if the hardware registers are
misconfigured or contain uninitialized values, such that the computed
sigma-delta modulator offset sdm exceeds the base frequency fout.
This might lead to an absurdly high clock rate being returned to the
Common Clock Framework, with unpredictable effects on downstream clk
consumers.
Provide the necessary sanitization to avoid trusting the hardware state.
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://lore.kernel.org/all/20260611235702.0E9691F000E9@smtp.kernel.org/
Fixes: 3481fc04d969 ("phy: rockchip: samsung-hdptx: Compute clk rate from PLL config")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20260811-hdptx-clk-fixes-v6-3-75bca0ee5753@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Calculating 'sdm' fraction in rk_hdptx_phy_clk_calc_rate_from_pll_cfg()
could trigger a divide-by-zero, as it uses div_u64() with a denominator
read directly from hardware: the values ropll_hw.sdm_deno,
ropll_hw.sdc_deno, ropll_hw.sdc_n, and ropll_hw.sdc_num are populated
from PLL registers which, in theory, could be left by the bootloader
uninitialized/misconfigured.
Provide the necessary sanitization to avoid trusting the hardware state.
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260611-hdptx-clk-fixes-v3-0-67b1b0c00e16@collabora.com?part=1
Fixes: 3481fc04d969 ("phy: rockchip: samsung-hdptx: Compute clk rate from PLL config")
Tested-by: Diederik de Haas <diederik@cknow-tech.com> # NanoPC-T6 LTS
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20260811-hdptx-clk-fixes-v6-2-75bca0ee5753@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The PHY PLL can be programmed by an external component, e.g. the
bootloader, just before the recalc_rate() callback is invoked during
devm_clk_hw_register() in the probe path.
Therefore rk_hdptx_phy_clk_recalc_rate() finds the PLL enabled and
attempts to compute the clock rate, while making use of the bpc value
from the HDMI PHY configuration, which always defaults to 8 because
phy_configure() was not run at that point. As a consequence, the
(re)calculated rate is incorrect when the actual bpc was higher than 8.
Do not rely on any of the hdmi_cfg members when computing the clock rate
and, instead, read the required input data (i.e. bpc), directly from the
hardware registers.
Fixes: 3481fc04d969 ("phy: rockchip: samsung-hdptx: Compute clk rate from PLL config")
Tested-by: Thomas Niederprüm <dubito@online.de>
Tested-by: Simon Wright <simon@symple.nz>
Tested-by: Diederik de Haas <diederik@cknow-tech.com> # NanoPC-T6 LTS
Reviewed-by: Andy Yan <andyshrk@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20260811-hdptx-clk-fixes-v6-1-75bca0ee5753@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The TMDS character rate of this PHY is configured using PHY bus width
in downstream vendor kernel and out-of-tree patches, however no in-tree
consumer of this PHY has ever called phy_set_bus_width() to change the
TMDS character rate as currently only 8-bit RGB output is supported by
the HDMI display driver.
The series "Split Generic PHY consumer and provider" clarifies that
phy_set_bus_width() is intended as a provider-only function.
Remove the deprecated unused fallback way to configure TMDS character
rate now that this HDMI PHY support using phy_configure() to configure
the TMDS character rate.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de> #rk3328
Tested-by: Diederik de Haas <diederik@cknow-tech.com> # Rock64
Link: https://patch.msgid.link/20260518180722.2480799-3-jonas@kwiboo.se
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The commit 10ed34d6eaaf ("phy: Add HDMI configuration options")
introduced a way for HDMI PHYs to be configured through the generic
phy_configure() function.
This driver derives the TMDS character rate from the pixel clock and the
PHY bus width setting. However, no in-tree consumer of this PHY has ever
called phy_set_bus_width() to change the TMDS character rate as only
8-bit RGB output is supported by the HDMI display driver.
Add configure() and validate() ops to allow consumers to configure the
TMDS character rate using phy_configure(). Fallback to the deprecated
way of using the PHY bus width to configure the TMDS character rate.
A typical call chain during DRM modeset on a RK3328 device:
dw_hdmi_rockchip_encoder_atomic_check():
- inno_hdmi_phy_validate(): pixclock 148500000 tmdsclock 594000000
dw_hdmi_rockchip_encoder_atomic_mode_set():
- inno_hdmi_phy_configure(): pixclock 148500000
- inno_hdmi_phy_validate(): pixclock 148500000 tmdsclock 594000000
vop_crtc_atomic_enable():
- inno_hdmi_phy_rk3328_clk_set_rate(): rate 594000000 tmdsclk 594000000
inno_hdmi_phy_rk3328_clk_set_rate(): pixclock 594000000 tmdsclock 594000000
- inno_hdmi_phy_rk3328_clk_recalc_rate(): pixclock 594000000 vco 594000000
dw_hdmi_rockchip_encoder_enable():
- inno_hdmi_phy_power_on(): Inno HDMI PHY Power On
- inno_hdmi_phy_rk3328_clk_set_rate(): rate 594000000 tmdsclk 594000000
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de> #rk3328
Tested-by: Diederik de Haas <diederik@cknow-tech.com> # Rock64
Link: https://patch.msgid.link/20260518180722.2480799-2-jonas@kwiboo.se
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
At high data rates like 4K60 (2500 Mbps), such as when using an
LT6911GXD bridge chip on an RK3588 board, fixed default timing parameters
can cause signal integrity issues and clock-data recovery failures.
The driver currently lacks a mechanism to adjust the clock lane sampling
phase to compensate for board-specific trace variations.
Resolve this by parsing and applying the optional 'rockchip,clk-lane-phase'
device tree property. This enables board-specific tuning of the clock
lane sampling phase in ~40 ps steps (range 0-7) to optimize link
stability. If the property is absent, the driver falls back to the
hardware default.
Signed-off-by: Gerald Loacker <gerald.loacker@wolfvision.net>
Reviewed-by: Michael Riesch <michael.riesch@collabora.com>
Link: https://patch.msgid.link/20260725-feature-mipi-csi-dphy-4k60-v4-3-5b2c4626d31e@wolfvision.net
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The rk1808 hsfreq table capped at 2499 Mbps, preventing a data rate of
exactly 2500 Mbps. Extend the final entry to 2500 Mbps to support this
rate.
This is essential for RK3588 reusing this array and fully supporting
rates up to 2500 Mbps.
Fixes: bd1f775d6027 ("phy/rockchip: add Innosilicon-based CSI dphy")
Reviewed-by: Michael Riesch <michael.riesch@collabora.com>
Signed-off-by: Gerald Loacker <gerald.loacker@wolfvision.net>
Link: https://patch.msgid.link/20260725-feature-mipi-csi-dphy-4k60-v4-1-5b2c4626d31e@wolfvision.net
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Pull phy fixes from Vinod Koul:
- fixes for zynqmp clock and pm error handling and SERDES scrambler
register handling
- Rockchip SSC spread fix
- Qualcomm musb return call fix
* tag 'phy-fixes-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: zynqmp: keep SERDES scrambler and 8b/10b enabled for USB
phy: zynqmp: use read-modify-write for SERDES scrambler bypass
phy: zynqmp: fix L0_TM_DISABLE_SCRAMBLE_ENCODER mask
phy: zynqmp: fix runtime PM leak on probe allocation failure
phy: zynqmp: fix clock error handling in xpsgtr_phy_init()
phy: rockchip: naneng-combphy: Always configure SSC spread direction
phy: qcom: m31-eusb2: Fix return value of init call
|
|
gpio: legacy interface cleanups for 7.3
These are the remaining patches for legacy gpio interface
cleanup, ensuring that files referencing them are sure to
have CONFIG_GPIOLIB_LEGACY set, and use linux/gpio/legacy.h
instead of the old linux/gpio.h header.
There are a few more patches already merged in other
branches for 7.3, including soc, led, net and media. Once
everything is in, we can apply the final patches to turn
off CONFIG_GPIOLIB_LEGACY by default and remove the obsolete
header file.
This branch is based on the immutable ib-mfd-legacy-gpio-7.3
branch from mfd.git to avoid a conflict in the rohm drivers.
|
|
linux/gpio.h should no longer be used, so remove those and
make sure linux/gpio/consumer.h is included instead.
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Commit 0b31f297557f ("phy: rockchip: naneng-combphy: Consolidate SSC
configuration") moved the SSC spread spectrum direction setup into the
new rk_combphy_common_cfg_ssc() helper. That helper returns early when
the 'rockchip,enable-ssc' property is absent, whereas the equivalent
RK3568_PHYREG32 direction writes previously ran unconditionally in the
per-type switch statements, independent of whether SSC modulation was
actually enabled.
As no in-tree board sets 'rockchip,enable-ssc', this changed the behavior
at least for USB3 on RK3576, which now fails to bring up the link.
USB 2.0 still enumerates, but USB 3.0 does not, and the SuperSpeed root
port floods the log every second with:
usb usb2-port1: Cannot enable. Maybe the USB cable is bad?
This was observed on two different RK3576 devices with a CoreChips SL6341
USB 2.0/3.0 hub connected to the USB DRD controller running in host mode.
Perform the SSC direction writes for PCIe/USB3 (and SATA) before the
enable_ssc check so that they always run, as they did before the
consolidation.
Cc: stable@vger.kernel.org
Closes: https://lore.kernel.org/all/CAKTNdwH_ZMQa-97h+tqdsWqXKtorkFF9wHAMn60-8ZGKuze_Mg@mail.gmail.com/
Fixes: 0b31f297557f ("phy: rockchip: naneng-combphy: Consolidate SSC configuration")
Signed-off-by: Alexey Charkov <alchark@flipper.net>
Tested-by: Liu Changjie <liucj1228@outlook.com>
Link: https://patch.msgid.link/20260714-naneng-ssc-fix-v1-1-1c40a58061ae@flipper.net
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Replace the #include of <linux/mod_devicetable.h> by the more specific
<linux/device-id/*.h> where applicable. For most cases the include
can be dropped completely, only a few drivers need one or two headers
added.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/1a3f2007c5c5dcf555c09a4035ce3ae8ef1b6c49.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
|
|
Add the missing documentation for the newly added clkout_ctl_phy field.
Fixes: 2775541de058 ("phy: rockchip: inno-usb2: Add clkout_ctl_phy support")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202605150315.MyBNQOPB-lkp@intel.com/
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260520102859.1357411-1-heiko@sntech.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The PCIe SSC configuration for the RK3588 and RK3576 SoCs required
additional tuning which is missing. When adding these same SSC
configurations for both of these two SoCs, as well as upcoming
platforms, it's obvious the SSC setup code was largely duplicated
across the platform-specific configuration functions. This becomes
harder to maintain as more platforms are added.
So extract the common SSC logic into a shared helper function,
rk_combphy_common_cfg_ssc(). This cleans up the per-platform drivers
and centralizes the standard configuration as possible.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Link: https://patch.msgid.link/1777251433-110466-1-git-send-email-shawn.lin@rock-chips.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The RK3528 has a single USB2PHY with a otg and host port.
Add support for the RK3528 variant of USB2PHY.
PHY tuning for RK3528:
- Turn off differential receiver in suspend mode to save power
consumption.
- Set HS eye-height to 400mV instead of default 450mV.
- Choose the Tx fs/ls data as linestate from TX driver for otg port
which uses dwc3 controller to improve fs/ls devices compatibility with
long cables.
Undocumented magic-values are based on the linux-stan-6.1-rkr5 tag of
the vendor-kernel.
Signed-off-by: Jianwei Zheng <jianwei.zheng@rock-chips.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260505170410.3265305-6-heiko@sntech.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The 480m clk is controlled using regs in the PHY address space and not
in the USB GRF address space on e.g. RK3528 and RK3506.
Add a clkout_ctl_phy usb2phy_reg to handle enable/disable of the 480m
clk on these SoCs.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260505170410.3265305-5-heiko@sntech.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The logic to decide if usbgrf or grf should be used is more complex than
it needs to be. For RK3568, RV1108 and soon RK3528 we can assign the
rockchip,usbgrf regmap directly to grf instead of doing a usbgrf and grf
dance.
Simplify the code to only use the grf regmap and handle the logic of
what regmap should be used in driver probe instead.
The only expected change from this is that RK3528 can be supported
because of an addition of a of_property_present() check.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260505170410.3265305-3-heiko@sntech.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Pull phy updates from Vinod Koul:
"Core:
- Add suuport for "rx-polarity" and "tx-polarity" device tree
properties and phy common properties to manage this
New Support:
- Qualcomm Glymur PCIe Gen4 2-lanes PCIe phy, DP and edp phy, USB UNI
PHY and SMB2370 eUSB2 repeater. SC8280xp QMP UFS PHY, Kaanapali
PCIe phy and QMP PHY, QCS615 QMP USB3+DP PHY and driver support for
that.
- SpacemiT PCIe/combo PHY and K1 USB2 PHY driver.
- HDMI 2.1 FRL configuration support and driver enabling for rockchip
samsung-hdptx driver
- TI TCAN1046 phy
- Renesas RZ/V2H(P) and RZ/V2N usb3
- Mediatek MT8188 hdmi-phy
- Google Tensor SoC USB PHY driver
- Apple Type-C PHY
Updates:
- Subsystem conversion for clock round_rate() to determine_rate()
- TI USB3 DT schema conversion
- Samsung ExynosAutov920 usb3, combo hsphy and ssphy support"
* tag 'phy-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (143 commits)
phy: ti: phy-j721e-wiz: convert from divider_round_rate() to divider_determine_rate()
dt-bindings: phy: ti,control-phy-otghs: convert to DT schema
dt-bindings: phy: ti,phy-usb3: convert to DT schema
phy: tegra: xusb: Remove unused powered_on variable
phy: renesas: rcar-gen3-usb2: add regulator dependency
phy: GOOGLE_USB: add TYPEC dependency
phy: enter drivers/phy/Makefile even without CONFIG_GENERIC_PHY
phy: renesas: rcar-gen3-usb2: Use mux-state for phyrst management
phy: renesas: rcar-gen3-usb2: Add regulator for OTG VBUS control
phy: renesas: rcar-gen3-usb2: Use devm_pm_runtime_enable()
phy: renesas: rcar-gen3-usb2: Factor out VBUS control logic
dt-bindings: phy: renesas,usb2-phy: Document RZ/G3E SoC
dt-bindings: phy: renesas,usb2-phy: Document mux-states property
dt-bindings: phy: renesas,usb2-phy: Document USB VBUS regulator
phy: rockchip: samsung-hdptx: Add HDMI 2.1 FRL support
phy: rockchip: samsung-hdptx: Extend rk_hdptx_phy_verify_hdmi_config() helper
phy: rockchip: samsung-hdptx: Switch to driver specific HDMI config
phy: rockchip: samsung-hdptx: Drop hw_rate driver data
phy: rockchip: samsung-hdptx: Compute clk rate from PLL config
phy: rockchip: samsung-hdptx: Cleanup *_cmn_init_seq lists
...
|
|
The PHY is capable of handling four HDMI 2.1 Fixed Rate Link (FRL)
lanes, and each one can operate at any of the rates of 3Gbps, 6Gbps,
8Gbps, 10Gbps or 12Gbps.
Add the necessary driver changes to support the feature.
Co-developed-by: Algea Cao <algea.cao@rock-chips.com>
Signed-off-by: Algea Cao <algea.cao@rock-chips.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20260113-phy-hdptx-frl-v6-11-8d5f97419c0b@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
In order to facilitate introduction of HDMI 2.1 FRL support and to avoid
recomputing the link rate after verifying the HDMI configuration given
as input, extend rk_hdptx_phy_verify_hdmi_config() by providing an
optional output parameter to store the validated configuration.
For improved code readability, also rename the existing hdmi input
parameter.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20260113-phy-hdptx-frl-v6-10-8d5f97419c0b@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
In preparation to support the FRL operation mode which gets configured
via the lanes and rate per lane tuple, switch to a driver specific
struct for configuring the link rate and bpc.
This simplifies and optimizes the implementation by allowing implicit
switches between TMDS and FRL rates, without requiring additional checks
of the active PHY mode followed by recalculations of the link rate when
operating in FRL mode.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20260113-phy-hdptx-frl-v6-9-8d5f97419c0b@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The ->hw_rate member of struct rk_hdptx_phy was mainly used to keep
track of the clock rate programmed in hardware and support implementing
the ->recalc_rate() callback in hdptx_phy_clk_ops.
Computing the clock rate from the actual PHY PLL configuration seems to
work reliably, hence remove the now redundant struct member.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20260113-phy-hdptx-frl-v6-8-8d5f97419c0b@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Improve ->recalc_rate() callback of hdptx_phy_clk_ops to calculate the
initial clock rate based on the actual PHY PLL configuration as
retrieved from the related hardware registers.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20260113-phy-hdptx-frl-v6-7-8d5f97419c0b@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Drop redundant reg_sequence entries from rk_hdptx_common_cmn_init_seq[],
i.e. those that are either duplicated or overridden in
rk_hdptx_tmds_cmn_init_seq[].
Additionally, a few items do not really belong to the former, hence move
them to the latter. That's mostly a preparatory step for adding FRL
support.
No functional changes intended at this point.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20260113-phy-hdptx-frl-v6-6-8d5f97419c0b@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
In preparation to support FRL mode, move the PHY lane output enablement
from the TMDS specific configuration to the common *_post_enable_lane()
helper and make sure it gets turned off in *_phy_disable().
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20260113-phy-hdptx-frl-v6-5-8d5f97419c0b@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Fix the naming inconsistencies for some of the functions and global
variables:
* Add the missing 'rk_hdptx_' prefix to ropll_tmds_cfg variable
* Replace '_ropll_tmds_' with '_tmds_ropll_' globally
* Replace 'hdtpx' with 'hdptx' globally
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260113-phy-hdptx-frl-v6-4-8d5f97419c0b@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Handle a bunch of reported checkpatch.pl complaints:
CHECK: Alignment should match open parenthesis
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260113-phy-hdptx-frl-v6-3-8d5f97419c0b@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
rk_hdptx_dp_reset() is allowed to sleep, hence replace the busy waiting
with usleep_range(), to allow other threads to run.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260113-phy-hdptx-frl-v6-2-8d5f97419c0b@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The for_each_available_child_of_node() calls of_node_put() to
release child_np in each success loop. After breaking from the
loop with the child_np has been released, the code will jump to
the put_child label and will call the of_node_put() again if the
devm_request_threaded_irq() fails. These cause a double free bug.
Fix by returning directly to avoid the duplicate of_node_put().
Fixes: ed2b5a8e6b98 ("phy: phy-rockchip-inno-usb2: support muxed interrupts")
Cc: stable@vger.kernel.org
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260109154626.2452034-1-vulab@iscas.ac.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Use scoped for-each loop when iterating over device nodes to make code a
bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20251224124407.208354-4-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Reviewed-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://patch.msgid.link/20251212-phy-clk-round-rate-v3-8-beae3962f767@redhat.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://patch.msgid.link/20251212-phy-clk-round-rate-v3-7-beae3962f767@redhat.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The naneng-combphy driver already has DT property checks for
"rockchip,enable-ssc" and "rockchip,ext-refclk", use it for
the rk3528_combphy_cfg. Also aligned the indentation of the
rk3528_combphy_grfcfgs parameters (using tabs).
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Reviewed-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20250910122000.951100-1-amadeus@jmu.edu.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Drop a bunch of unused members from struct ropll_config and make the
static ropll_tmds_cfg table more readable:
* add a table header
* sort rows by rate
* convert hex values to decimal (for consistency)
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20251221-phy-hdptx-pll-fix-v2-2-ae4abf7f75a1@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Attempting to make use of a 1080p@120Hz display mode with 10 bpc RGB on
my Acer XV275K P3 monitor results in a blank image. A similar behavior
has been reported on Philips 279M1RV.
The faulty modeline is created by drm_gtf_mode_complex() based on the
following EDID entry from the Standard Timings block:
GTF: 1920x1080 119.999987 Hz 16:9 138.840 kHz 368.759000 MHz
It's worth noting the computed pixel clock ends up being slightly higher
at 368.881000 MHz. Nevertheless, this seems to work consistently fine
with 8 bpc RGB.
After switching to 10 bpc, the TMDS character rate expected for the mode
increases to 461.101250 MHz, as per drm_hdmi_compute_mode_clock().
Since there is no entry for this rate in the ropll_tmds_cfg table, the
necessary HDMI PLL configuration parameters are calculated dynamically
by rk_hdptx_phy_clk_pll_calc(). However, the resulting output rate is
not quite a perfect match, i.e. 461.100000 MHz. That proved to be the
actual root cause of the problem.
Add a new entry to the TMDS configuration table and provide the
necessary frequency division coefficients for the PHY PLL to generate
the expected 461.101250 MHz output.
Fixes: 9d0ec51d7c22 ("phy: rockchip: samsung-hdptx: Add high color depth management")
Tested-by: Derek Foreman <derek.foreman@collabora.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20251221-phy-hdptx-pll-fix-v2-1-ae4abf7f75a1@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Passing pm_runtime_put() return value to the callers is not particularly
useful.
Returning an error code from pm_runtime_put() merely means that it has
not queued up a work item to check whether or not the device can be
suspended and there are many perfectly valid situations in which that
can happen, like after writing "on" to the devices' runtime PM "control"
attribute in sysfs for one example. It also happens when the kernel is
configured with CONFIG_PM unset.
Accordingly, update samsung_mipi_dcphy_exit() to simply discard the
return value of pm_runtime_put() and always return success to the
caller.
This will facilitate a planned change of the pm_runtime_put() return
type to void in the future.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2281919.Icojqenx9y@rafael.j.wysocki
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
When the OTG USB port is used to power to SoC, configured as peripheral and
used in gadget mode, communication stops without notice about 6 seconds
after the gadget is configured and enumerated.
The problem was observed on a Radxa Rock Pi S board, which can only be
powered by the only USB-C connector. That connector is the only one usable
in gadget mode. This implies the USB cable is connected from before boot
and never disconnects while the kernel runs.
The related code flow in the PHY driver code can be summarized as:
* the first time chg_detect_work starts (6 seconds after gadget is
configured and enumerated)
-> rockchip_chg_detect_work():
if chg_state is UNDEFINED:
property_enable(base, &rphy->phy_cfg->chg_det.opmode, false); [Y]
* rockchip_chg_detect_work() changes state and re-triggers itself a few
times until it reaches the DETECTED state:
-> rockchip_chg_detect_work():
if chg_state is DETECTED:
property_enable(base, &rphy->phy_cfg->chg_det.opmode, true); [Z]
At [Y] all existing communications stop. E.g. using a CDC serial gadget,
the /dev/tty* devices are still present on both host and device, but no
data is transferred anymore. The later call with a 'true' argument at [Z]
does not restore it.
Due to the lack of documentation, what chg_det.opmode does exactly is not
clear, however by code inspection it seems reasonable that is disables
something needed to keep the communication working, and testing proves that
disabling these lines lets gadget mode keep working. So prevent changes to
chg_det.opmode when there is a cable connected (VBUS present).
Fixes: 98898f3bc83c ("phy: rockchip-inno-usb2: support otg-port for rk3399")
Cc: stable@vger.kernel.org
Closes: https://lore.kernel.org/lkml/20250414185458.7767aabc@booty/
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/20251127-rk3308-fix-usb-gadget-phy-disconnect-v2-2-dac8a02cd2ca@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
When the OTG USB port is used to power the SoC, configured as peripheral
and used in gadget mode, there is a disconnection about 6 seconds after the
gadget is configured and enumerated.
The problem was observed on a Radxa Rock Pi S board, which can only be
powered by the only USB-C connector. That connector is the only one usable
in gadget mode. This implies the USB cable is connected from before boot
and never disconnects while the kernel runs.
The problem happens because of the PHY driver code flow, summarized as:
* UDC start code (triggered via configfs at any time after boot)
-> phy_init
-> rockchip_usb2phy_init
-> schedule_delayed_work(otg_sm_work [A], 6 sec)
-> phy_power_on
-> rockchip_usb2phy_power_on
-> enable clock
-> rockchip_usb2phy_reset
* Now the gadget interface is up and running.
* 6 seconds later otg_sm_work starts [A]
-> rockchip_usb2phy_otg_sm_work():
if (B_IDLE state && VBUS present && ...):
schedule_delayed_work(&rport->chg_work [B], 0);
* immediately the chg_detect_work starts [B]
-> rockchip_chg_detect_work():
if chg_state is UNDEFINED:
if (!rport->suspended):
rockchip_usb2phy_power_off() <--- [X]
At [X], the PHY is powered off, causing a disconnection. This quickly
triggers a new connection and following re-enumeration, but any connection
that had been established during the 6 seconds is broken.
The code already checks for !rport->suspended (which, somewhat
counter-intuitively, means the PHY is powered on), so add a guard for VBUS
as well to avoid a disconnection when a cable is connected.
Fixes: 98898f3bc83c ("phy: rockchip-inno-usb2: support otg-port for rk3399")
Cc: stable@vger.kernel.org
Closes: https://lore.kernel.org/lkml/20250414185458.7767aabc@booty/
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Co-developed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/20251127-rk3308-fix-usb-gadget-phy-disconnect-v2-1-dac8a02cd2ca@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Fixup PHY deskew FIFO to prevent the phase of D2 lane going ahead of
other lanes. It's worth noting this might only happen when dealing with
HDMI 2.0 rates.
Fixes: 553be2830c5f ("phy: rockchip: Add Samsung HDMI/eDP Combo PHY driver")
Co-developed-by: Algea Cao <algea.cao@rock-chips.com>
Signed-off-by: Algea Cao <algea.cao@rock-chips.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251028-phy-hdptx-fixes-v1-3-ecc642a59d94@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Due to its relatively low frequency, a noise stemming from the 24MHz PLL
reference clock may traverse the low-pass loop filter of ROPLL, which
could potentially generate some HDMI flash artifacts.
Reduce ROPLL loop bandwidth in an attempt to mitigate the problem.
Fixes: 553be2830c5f ("phy: rockchip: Add Samsung HDMI/eDP Combo PHY driver")
Co-developed-by: Algea Cao <algea.cao@rock-chips.com>
Signed-off-by: Algea Cao <algea.cao@rock-chips.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251028-phy-hdptx-fixes-v1-2-ecc642a59d94@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
Linus Torvalds
Bartosz Golaszewski
Jason Yang
Cristian Ciocaltea
Jonas Karlman
Gerald Loacker
Arnd Bergmann
Alexey Charkov
Uwe Kleine-König (The Capable Hub)
Heiko Stuebner
Shawn Lin
Jianwei Zheng
Wentao Liang
Krzysztof Kozlowski
Brian Masney
Chukun Pan
Rafael J. Wysocki
Luca Ceresoli
Louis Chauvet