| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
mpi3mr_refresh_tgtdevs() and mpi3mr_devinfochg_evt_bh() read
tgt_dev->starget and immediately pass it to starget_for_each_device()
without holding mrioc->tgtdev_lock. Every writer of this field --
mpi3mr_target_alloc(), mpi3mr_target_destroy(), mpi3mr_slave_destroy()
and mpi3mr_sdev_init() -- correctly serializes access under tgtdev_lock,
but these two read sites do not, which leaves a check-then-use window
against the SCSI core's target teardown path (scsi_remove_target(),
invoked e.g. via a concurrent host reset, sysfs "delete", or SCSI EH
device offlining running independently of the fwevt workqueue).
Sequence observed on production hardware, triggered on the
mpi3mr0_fwevt_wrkr workqueue during a SAS topology change shortly after
a controller reset:
BUG: kernel NULL pointer dereference, address: 0000000000000058
RIP: scsi_is_host_device+0x7/0x20
Call Trace:
starget_for_each_device+0x34/0x100
mpi3mr_refresh_tgtdevs+0x152/0x1d0 [mpi3mr]
mpi3mr_fwevt_bh+0x514/0x6c0 [mpi3mr]
mpi3mr_fwevt_worker+0x1a/0x50 [mpi3mr]
process_one_work+0x194/0x380
worker_thread+0x2fe/0x410
mpi3mr_refresh_tgtdevs() reads tgt_dev->starget as non-NULL, but by the
time starget_for_each_device() dereferences it, a concurrent
mpi3mr_target_destroy() has already cleared tgt_dev->starget under
tgtdev_lock and the SCSI/device core has freed the underlying
scsi_target (and its embedded struct device). The stale pointer is then
walked by dev_to_shost() -> scsi_is_host_device(), producing the
NULL/garbage dereference above.
Fix this by taking mrioc->tgtdev_lock around every read of
tgt_dev->starget, matching the existing writer-side discipline. Since
starget_for_each_device() and mpi3mr_update_sdev() can end up doing
non-atomic work (e.g. queue_limits_commit_update()), the lock cannot be
held across the whole call, so instead pin the target's device with
get_device() while holding the lock, drop the lock, then run
starget_for_each_device() against the pinned reference and put_device()
afterwards. This closes the TOCTOU window instead of merely narrowing
it.
The same unlocked read-and-dereference pattern also exists earlier in
mpi3mr_refresh_tgtdevs()'s first removal-scan loop
(tgt_dev->starget->hostdata); fix it the same way by holding tgtdev_lock
across that check, which is cheap since it only touches plain struct
fields.
Assisted-by: Claude:Sonnet5 [Claude Code]
Signed-off-by: Laurence Oberman <loberman@redhat.com>
Acked-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Link: https://patch.msgid.link/20260831120047.14690-1-loberman@redhat.com
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
|
|
Pull in outstanding fixes queued for 7.3.
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
|
|
Pull more SCSI updates from Martin Petersen:
"Remaining updates for the 7.3 merge window. The only core change is
enabling context analysis for the SCSI layer and UFS.
The remaining changes are either bug fixes or hardening"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi: (26 commits)
scsi: snic: Fix SCSI host leak on workqueue allocation failure
scsi: MAINTAINERS: Update my email address
scsi: MAINTAINERS: Leave the cumana_1 and oak drivers to the RISCPC maintainers
scsi: leapraid: Standardize NCQ priority sysfs attributes
scsi: leapraid: Serialize firmware log mmap with teardown
scsi: leapraid: Balance host references for firmware log VMAs
scsi: lpfc: Remove unnnecessary NULL check
scsi: qla2xxx: Fix an loop timeout test
scsi: qla2xxx: Fix an error code in qla_get_tmf()
scsi: ibmvfc: Fix use of uninitialized rport in ibmvfc_do_work()
scsi: core: Enable context analysis for hosts.o
scsi: lpfc: Replace strlcat() with sysfs_emit_at() in the sysfs show functions
scsi: lpfc: Replace strlcat() with seq_buf in the debugfs dump helpers
scsi: lpfc: Replace strlcat() with seq_buf in lpfc_rx_monitor_report()
scsi: lpfc: Replace strlcat() with scnprintf() in lpfc_vport_symbolic_node_name()
scsi: lpfc: Replace strlcat() with seq_buf in lpfc_info()
scsi: core: Enable context analysis
scsi: core: Protect host state changes with the host lock
scsi: core: Add lock context annotations
scsi: core: Pass the SCSI host pointer directly to scanning functions
...
|
|
mpi3mr_get_tgtdev_by_addr() increments the target device kref when it
returns a device. If a subsequent error triggers a goto out_fail after
the tgtdev reference is acquired, the reference is never released
because the out_fail path does not call mpi3mr_tgtdev_put(). This
prevents the target device structure from ever being freed.
Add a tgtdev put in the out_fail path, guarded by a NULL check since
tgtdev is only acquired for SAS_END_DEVICE types and the same cleanup
path is shared by earlier error cases where tgtdev is still NULL.
Fixes: e22bae30667a ("scsi: mpi3mr: Add expander devices to STL")
Signed-off-by: Milan P. Gandhi <mgandhi@redhat.com>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Link: https://patch.msgid.link/20260812103344.174247-3-mgandhi@redhat.com
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
|
|
sas_port_alloc_num() can return NULL on memory allocation failure. The
return value is passed directly to sas_port_add() without a NULL check,
which causes a NULL pointer dereference.
Additionally, if sas_port_add() fails, the allocated port is not freed
before jumping to out_fail, leaking the sas_port structure. Call
sas_port_free() to properly release it.
Fixes: e22bae30667a ("scsi: mpi3mr: Add expander devices to STL")
Signed-off-by: Milan P. Gandhi <mgandhi@redhat.com>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Link: https://patch.msgid.link/20260812103344.174247-2-mgandhi@redhat.com
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
|
|
Some but not all SCSI host state changes are protected with the SCSI
host lock. Annotate the SCSI host state with __guarded_by(host_lock) and
protect all SCSI host state changes with the SCSI host lock. This patch
prevents that KCSAN complains about data races when accessing the SCSI
host state.
Reported-by: Jianzhou Zhao <luckd0g@163.com>
Closes: https://lore.kernel.org/all/36d59d0e.6db0.19cdbeee01b.Coremail.luckd0g@163.com/
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://patch.msgid.link/681e4a5260c182feb5fc1d96f0d43c62c21dc6c9.1786142946.git.bvanassche@acm.org
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
|
|
mpi3mr_fault_uevent_emit() runs from the fault watchdog and reset paths
where host I/O may already be blocked. GFP_KERNEL allocations here, both
the local kzalloc_obj() and the ones inside kobject_uevent_env() itself,
can trigger reclaim that waits on that blocked I/O and deadlock.
Use memalloc_noio_save()/restore() to cover the whole call instead of
just the local allocation.
Fixes: ec54b348f274 ("scsi: mpi3mr: Record and report controller firmware faults")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260724164630.924288-1-chandrakanth.patil%40broadcom.com
Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Link: https://patch.msgid.link/20260724175231.935192-1-chandrakanth.patil@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fix typo in "synchronize".
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20260403133109.2744351-1-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull in fixes to resolve mpi3mr merge conflict.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Enhance the IOC shutdown process to handle transient failures during
controller cleanup. Add retry logic with configurable maximum retry
count (MPI3MR_MAX_SHUTDOWN_RETRY_COUNT) and proper timeout management
that resets on each retry attempt. This ensures shutdown can recover
from temporary issues without failing completely.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://patch.msgid.link/20260320090326.47544-4-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Track queue-full conditions on operational request queues in the driver.
Record the last host tag returned to the SCSI mid-layer and count I/Os
affected by queue-full conditions.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://patch.msgid.link/20260320090326.47544-3-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Operational replies without a valid scsi_cmnd indicate an invalid I/O
completion and a potentially inconsistent controller state. Track this
condition and allow the watchdog to trigger a soft reset to safely
recover.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://patch.msgid.link/20260320090326.47544-2-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The driver retains reset history even after the IOC has successfully
reached the READY state. That leaves stale reset information active during
normal operation and can mislead recovery and diagnostics. In addition, if
the IOC becomes READY just as the ready timeout loop exits, the driver
still follows the failure path and may retry or report failure incorrectly.
Clear reset history once READY is confirmed so driver state matches actual
IOC status. After the timeout loop, recheck the IOC state and treat READY
as success instead of failing.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://patch.msgid.link/20260225082622.82588-1-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull in remaining fixes from 7.0/scsi-queue.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Conversion performed via this Coccinelle script:
// SPDX-License-Identifier: GPL-2.0-only
// Options: --include-headers-for-types --all-includes --include-headers --keep-comments
virtual patch
@gfp depends on patch && !(file in "tools") && !(file in "samples")@
identifier ALLOC = {kmalloc_obj,kmalloc_objs,kmalloc_flex,
kzalloc_obj,kzalloc_objs,kzalloc_flex,
kvmalloc_obj,kvmalloc_objs,kvmalloc_flex,
kvzalloc_obj,kvzalloc_objs,kvzalloc_flex};
@@
ALLOC(...
- , GFP_KERNEL
)
$ make coccicheck MODE=patch COCCI=gfp.cocci
Build and boot tested x86_64 with Fedora 42's GCC and Clang:
Linux version 6.19.0+ (user@host) (gcc (GCC) 15.2.1 20260123 (Red Hat 15.2.1-7), GNU ld version 2.44-12.fc42) #1 SMP PREEMPT_DYNAMIC 1970-01-01
Linux version 6.19.0+ (user@host) (clang version 20.1.8 (Fedora 20.1.8-4.fc42), LLD 20.1.8) #1 SMP PREEMPT_DYNAMIC 1970-01-01
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
The driver encountered a crash during resource cleanup when the reply and
request queues were NULL due to freed memory. This issue occurred when the
creation of reply or request queues failed, and the driver freed the memory
first, but attempted to mem set the content of the freed memory, leading to
a system crash.
Add NULL pointer checks for reply and request queues before accessing the
reply/request memory during cleanup
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://patch.msgid.link/20260212070026.30263-1-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull SCSI updates from James Bottomley:
"Usual driver updates (qla2xxx, mpi3mr, mpt3sas, ufs) plus assorted
cleanups and fixes.
The biggest core change is the massive code motion in the sd driver to
remove forward declarations and the most significant change is to
enumify the queuecommand return"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (78 commits)
scsi: csiostor: Fix dereference of null pointer rn
scsi: buslogic: Reduce stack usage
scsi: ufs: host: mediatek: Require CONFIG_PM
scsi: ufs: mediatek: Fix page faults in ufs_mtk_clk_scale() trace event
scsi: smartpqi: Fix memory leak in pqi_report_phys_luns()
scsi: mpi3mr: Make driver probing asynchronous
scsi: ufs: core: Flush exception handling work when RPM level is zero
scsi: efct: Use IRQF_ONESHOT and default primary handler
scsi: ufs: core: Use a host-wide tagset in SDB mode
scsi: qla2xxx: target: Add WQ_PERCPU to alloc_workqueue() users
scsi: qla2xxx: Add WQ_PERCPU to alloc_workqueue() users
scsi: qla4xxx: Add WQ_PERCPU to alloc_workqueue() users
scsi: mpi3mr: Driver version update to 8.17.0.3.50
scsi: mpi3mr: Fixed the W=1 compilation warning
scsi: mpi3mr: Record and report controller firmware faults
scsi: mpi3mr: Update MPI Headers to revision 39
scsi: mpi3mr: Use negotiated link rate from DevicePage0
scsi: mpi3mr: Avoid redundant diag-fault resets
scsi: mpi3mr: Rename log data save helper to reflect threaded/BH context
scsi: mpi3mr: Add module parameter to control threaded IRQ polling
...
|
|
Speed up the boot process by using the asynchronous probing feature
supported by the kernel.
Set the PROBE_PREFER_ASYNCHRONOUS flag in the device_driver structure so
that the driver core probes in parallel.
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://patch.msgid.link/20260130080207.90053-1-kanie@linux.alibaba.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Ranjan Kumar <ranjan.kumar@broadcom.com> says:
Enhancements for mpi3mr driver
Link: https://patch.msgid.link/20260116060719.32937-1-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Update driver version to 8.17.0.3.50
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://patch.msgid.link/20260116060719.32937-9-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fixed W=1 compilation warnings
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://patch.msgid.link/20260116060719.32937-8-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Capture and retain firmware fault codes and extended fault information
whenever the controller enters a fault state.
Maintain a persistent firmware fault counter, expose it via sysfs, and
generate uevents to aid userspace diagnostics and failure analysis.
Co-developed-by: Salomon Dushimirimana <salomondush@google.com>
Signed-off-by: Salomon Dushimirimana <salomondush@google.com>
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://patch.msgid.link/20260116060719.32937-7-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Update MPI Headers to revision 39.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://patch.msgid.link/20260116060719.32937-6-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Firmware populates the negotiated SAS link rate in DevicePage0 during
device discovery. Update mpi3mr to cache this value while initializing
the target device.
When available, the cached link rate is used instead of issuing
additional SAS PHY or expander PHY page reads. If the DevicePage0 value
is missing or invalid, the driver falls back to the existing PHY-based
mechanism.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://patch.msgid.link/20260116060719.32937-5-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Update reset handling to invoke diag-save only for diag-fault resets.
Skip issuing a diagnostic reset if the IOC is already in FAULT state,
preventing repeated fault handling and improving reset stability.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://patch.msgid.link/20260116060719.32937-4-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Log data events can be processed from BH and threaded contexts. Rename
the save helper to document its intended usage and improve readability
of the event handling flow.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://patch.msgid.link/20260116060719.32937-3-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add a module parameter to enable or disable threaded IRQ polling in the
driver. The default behavior remains unchanged with polling enabled.
When disabled, completion processing is kept entirely in the hard IRQ
context, avoiding the threaded polling path.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://patch.msgid.link/20260116060719.32937-2-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In clang version 21.1 and later the -Wimplicit-enum-enum-cast warning
option has been introduced. This warning is enabled by default and can
be used to catch .queuecommand() implementations that return another
value than 0 or one of the SCSI_MLQUEUE_* constants. Hence this patch
that changes the return type of the .queuecommand() implementations from
'int' into 'enum scsi_qc_status'. No functionality has been changed.
Cc: Damien Le Moal <dlemoal@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260115210357.2501991-6-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Let alloc_ordered_workqueue() format the workqueue name instead of
calling scnprintf() explicitly. Compile-tested only.
Cc: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260106185723.2526901-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The driver was not reading the MAX_REQ_PER_REPLY_QUEUE_LIMIT IOCFacts
flag, so the reply-queue-full handling was never enabled, even on
firmware that supports it. Reading this flag enables the feature and
prevents reply queue overflow.
Fixes: f08b24d82749 ("scsi: mpi3mr: Avoid reply queue full condition")
Cc: stable@vger.kernel.org
Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Link: https://patch.msgid.link/20251211002929.22071-1-chandrakanth.patil@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Avoid scanning SAS/SATA devices in channel 1 when SAS transport is
enabled, as the SAS/SATA devices are exposed through channel 0.
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/stable/20251120071955.463475-1-suganath-prabu.subramani%40broadcom.com
Link: https://patch.msgid.link/20251120071955.463475-1-suganath-prabu.subramani@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull SCSI updates from James Bottomley:
"Usual driver updates (ufs, mpi3mr, lpfc, pm80xx, mpt3sas) plus
assorted cleanups and fixes.
The only core update is to sd.c and is mostly cosmetic"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (105 commits)
scsi: MAINTAINERS: Update FC element owners
scsi: mpt3sas: Update driver version to 54.100.00.00
scsi: mpt3sas: Add support for 22.5 Gbps SAS link rate
scsi: mpt3sas: Suppress unnecessary IOCLogInfo on CONFIG_INVALID_PAGE
scsi: mpt3sas: Fix crash in transport port remove by using ioc_info()
scsi: ufs: ufs-qcom: Add support for limiting HS gear and rate
scsi: ufs: pltfrm: Add DT support to limit HS gear and gear rate
scsi: ufs: ufs-qcom: Remove redundant re-assignment to hs_rate
scsi: ufs: dt-bindings: Document gear and rate limit properties
scsi: ufs: core: Fix data race in CPU latency PM QoS request handling
scsi: libfc: Fix potential buffer overflow in fc_ct_ms_fill()
scsi: storvsc: Remove redundant ternary operators
scsi: ufs: core: Change MCQ interrupt enable flow
scsi: smartpqi: Replace kmalloc() + copy_from_user() with memdup_user()
scsi: hpsa: Replace kmalloc() + copy_from_user() with memdup_user()
scsi: hpsa: Fix potential memory leak in hpsa_big_passthru_ioctl()
scsi: lpfc: Copyright updates for 14.4.0.11 patches
scsi: lpfc: Update lpfc version to 14.4.0.11
scsi: lpfc: Convert debugfs directory counts from atomic to unsigned int
scsi: lpfc: Clean up extraneous phba dentries
...
|
|
Bump driver version to 8.15.0.5.50 to match the latest release.
Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Link: https://lore.kernel.org/r/20250820084138.228471-7-chandrakanth.patil@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Task Management to virtual drives may timeout prematurely when using a
static default timeout.
Read Abort and Reset timeouts from Device Page 0 and apply the maximum
of the firmware value and the default.
This fixes premature TM failures on virtual drives.
Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Link: https://lore.kernel.org/r/20250820084138.228471-6-chandrakanth.patil@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Sync MPI header files to revision 37 to match current firmware/spec
definitions.
No functional change.
Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Link: https://lore.kernel.org/r/20250820084138.228471-5-chandrakanth.patil@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
I/Os can race with controller reset and fail.
Block requests at the mid layer when reset starts using
scsi_host_block(), and resume with scsi_host_unblock() after reset
completes.
Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Link: https://lore.kernel.org/r/20250820084138.228471-4-chandrakanth.patil@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Firmware can enter a transient fault while creating operational queues.
The driver fails the load immediately.
Add a retry loop that checks controller status and history bit after
queue creation. If either indicates a fault, retry init up to a set
limit before failing.
Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Link: https://lore.kernel.org/r/20250820084138.228471-3-chandrakanth.patil@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
During enclosure reboot or expander reset, firmware may report a link
speed of 0 in "Device Add" events while the link is still coming up.
The driver drops such devices, leaving them missing even after the link
recovers.
Fix this by treating link speed 0 as 1.5 Gbps during device addition so
the device is exposed to the OS. The actual link speed will be updated
later when link-up events arrive.
Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Link: https://lore.kernel.org/r/20250820084138.228471-2-chandrakanth.patil@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Instances are passed struct block_device *bdev argument; the only thing
it is used for (if it's used in the first place) is bdev->bd_disk.
Might as well pass that in the first place...
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Ranjan Kumar <ranjan.kumar@broadcom.com> says:
Few minor fixes of mpi3mr driver.
Link: https://lore.kernel.org/r/20250627194539.48851-1-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Updated driver version to 8.14.0.5.50
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20250627194539.48851-5-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
On 32-bit systems, 64-bit BAR writes to admin queue registers are
performed as two 32-bit writes. Without locking, this can cause partial
writes when accessed concurrently.
Updated per-queue spinlocks is used to serialize these writes and prevent
race conditions.
Fixes: 824a156633df ("scsi: mpi3mr: Base driver code")
Cc: stable@vger.kernel.org
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20250627194539.48851-4-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The volatile qualifier is redundant for __iomem pointers.
Cleaned up usage in mpi3mr_writeq() and sysif_regs pointer as per
Upstream compliance.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20250627194539.48851-3-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The "is_waiting" flag was updated after calling complete(), which could
lead to a race where the waiting thread wakes up before the flag is
cleared. This may cause a missed wakeup or stale state check.
Reorder the operations to update "is_waiting" before signaling completion
to ensure consistent state.
Fixes: 824a156633df ("scsi: mpi3mr: Base driver code")
Cc: stable@vger.kernel.org
Co-developed-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20250627194539.48851-2-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fix all kernel-doc problems in mpi3mr_app.c:
mpi3mr_app.c:809: warning: Excess function parameter 'data' description in 'mpi3mr_set_trigger_data_in_hdb'
mpi3mr_app.c:836: warning: Excess function parameter 'data' description in 'mpi3mr_set_trigger_data_in_all_hdb'
mpi3mr_app.c:3395: warning: No description found for return value of 'sas_ncq_prio_supported_show'
mpi3mr_app.c:3413: warning: No description found for return value of 'sas_ncq_prio_enable_show'
Fixes: fc4444941140 ("scsi: mpi3mr: HDB allocation and posting for hardware and firmware buffers")
Fixes: d8d08d1638ce ("scsi: mpi3mr: Trigger support")
Fixes: 90e6f08915ec ("scsi: mpi3mr: Fix ATA NCQ priority support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20250620162158.776795-1-rdunlap@infradead.org
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Sumit Saxena <sumit.saxena@broadcom.com>
Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Cc: Ranjan Kumar <ranjan.kumar@broadcom.com>
Cc: mpi3mr-linuxdrv.pdl@broadcom.com
Cc: Damien Le Moal <dlemoal@kernel.org>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
With the ATA error model, an NCQ command failure always triggers an abort
(termination) of all NCQ commands queued on the device. In such case, the
SAT or the host must handle the failed command according to the command
sense data and immediately retry all other NCQ commands that were aborted
due to the failed NCQ command.
For SAS HBAs controlled by the mpi3mr driver, NCQ command aborts are not
handled by the HBA SAT and sent back to the host, with an ioc log
information equal to 0x31080000 (IOC_LOGINFO_PREFIX_PL with the PL code
PL_LOGINFO_CODE_SATA_NCQ_FAIL_ALL_CMDS_AFTR_ERR). The function
mpi3mr_process_op_reply_desc() always forces a retry of commands
terminated with the status MPI3_IOCSTATUS_SCSI_IOC_TERMINATED using the
SCSI result DID_SOFT_ERROR, regardless of the ioc_loginfo for the
command. This correctly forces the retry of collateral NCQ abort
commands, but with the retry counter for the command being incremented.
If a command to an ATA device is subject to too many retries due to other
NCQ commands failing (e.g. read commands trying to access unreadable
sectors), the collateral NCQ abort commands may be terminated with an
error as they run out of retries. This violates the SAT specification and
causes hard-to-debug command errors.
Solve this issue by modifying the handling of the
MPI3_IOCSTATUS_SCSI_IOC_TERMINATED status to check if a command is for an
ATA device and if the command ioc_loginfo indicates an NCQ collateral
abort. If that is the case, force the command retry using the SCSI result
DID_IMM_RETRY to avoid incrementing the command retry count.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250606052747.742998-2-dlemoal@kernel.org
Tested-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Improve event process debugging. Implement more verbose event logging
throughout the driver.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20250423092139.110206-1-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
Laurence Oberman
Martin K. Petersen (Oracle)
Linus Torvalds
Milan P. Gandhi
Bart Van Assche
Chandrakanth Patil
Claudiu Beznea
Martin K. Petersen
Ranjan Kumar
Kees Cook
Guixin Liu
Suganath Prabu S
Al Viro
Randy Dunlap
Damien Le Moal