| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull networking fixes from Paolo Abeni:
"Including fixes from Netfilter and IPsec.
Current release - regressions:
- netfilter: nft_set_pipapo:
- don't return bogus extension pointer
- fix null deref for empty set
Current release - new code bugs:
- core: prevent deadlocks when enabling NAPIs with mixed kthread
config
- eth: netdevsim: Fix wild pointer access in nsim_queue_free().
Previous releases - regressions:
- page_pool: allow enabling recycling late, fix false positive
warning
- sched: ets: use old 'nbands' while purging unused classes
- xfrm:
- restore GSO for SW crypto
- bring back device check in validate_xmit_xfrm
- tls: handle data disappearing from under the TLS ULP
- ptp: prevent possible ABBA deadlock in ptp_clock_freerun()
- eth:
- bnxt: fill data page pool with frags if PAGE_SIZE > BNXT_RX_PAGE_SIZE
- hv_netvsc: fix panic during namespace deletion with VF
Previous releases - always broken:
- netfilter: fix refcount leak on table dump
- vsock: do not allow binding to VMADDR_PORT_ANY
- sctp: linearize cloned gso packets in sctp_rcv
- eth:
- hibmcge: fix the division by zero issue
- microchip: fix KSZ8863 reset problem"
* tag 'net-6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (54 commits)
net: usb: asix_devices: add phy_mask for ax88772 mdio bus
net: kcm: Fix race condition in kcm_unattach()
selftests: net/forwarding: test purge of active DWRR classes
net/sched: ets: use old 'nbands' while purging unused classes
bnxt: fill data page pool with frags if PAGE_SIZE > BNXT_RX_PAGE_SIZE
netdevsim: Fix wild pointer access in nsim_queue_free().
net: mctp: Fix bad kfree_skb in bind lookup test
netfilter: nf_tables: reject duplicate device on updates
ipvs: Fix estimator kthreads preferred affinity
netfilter: nft_set_pipapo: fix null deref for empty set
selftests: tls: test TCP stealing data from under the TLS socket
tls: handle data disappearing from under the TLS ULP
ptp: prevent possible ABBA deadlock in ptp_clock_freerun()
ixgbe: prevent from unwanted interface name changes
devlink: let driver opt out of automatic phys_port_name generation
net: prevent deadlocks when enabling NAPIs with mixed kthread config
net: update NAPI threaded config even for disabled NAPIs
selftests: drv-net: don't assume device has only 2 queues
docs: Fix name for net.ipv4.udp_child_hash_entries
riscv: dts: thead: Add APB clocks for TH1520 GMACs
...
|
|
Remove the extra leading period and provide more elaborate explanation for
why devm_v4l2_sensor_clk_get() is only allowed to be used on camera sensor
devices.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
VOSYS contains more resets for a display pipeline, includes ones for the
display controller (called DPU in the manual), the HDMI controller and 2
MIPI DSI controllers.
Allocate IDs for these resets in the dt binding header file.
Now all peripheral related VOSYS reset controls are here, only the bus
matrix / IOPMP ones are missing, which shouldn't be messed with.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250813081716.2181843-2-uwu@icenowy.me
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Some modern NICs support including the IPv6 Flow Label in
the flow hash for RSS queue selection. This is outside
the old "Microsoft spec", but was included in the OCP NIC spec:
[ ] RSS include flow label in the hash (configurable)
https://www.opencompute.org/w/index.php?title=Core_Offloads#Receive_Side_Scaling
RSS Flow Label hashing allows TCP Protective Load Balancing (PLB)
to recover from receiver congestion / overload.
Rx CPU/queue hotspots are relatively common for data ingest
workloads, and so far we had to try to detect the condition
at the RPC layer and reopen the connection. PLB lets us change
the Flow Label and therefore Rx CPU on RTO, with minimal packet
reordering. PLB reaction times are much faster, and can happen
at any point in the connection, not just at RPC boundaries.
Due to the nature of host processing (relatively long queues,
other kernel subsystems masking IRQs for 100s of msecs)
the risk of reordering within the host is higher than in
the network. But for applications which need it - it is far
preferable to potentially persistent overload of subset of
queues.
It is expected that the hash communicated to the host
may change if the Flow Label changes. This may be surprising
to some host software, but I don't expect the devices
can compute two Toeplitz hashes, one with the Flow Label
for queue selection and one without for the rx hash
communicated to the host. Besides, changing the hash
may potentially help to change the path thru host queues.
User can disable NETIF_F_RXHASH if they require a stable
flow hash.
The name RXH_IP6_FL was chosen based on what we call
Flow Label variables in IPv6 processing (fl). I prefer
fl_lbl but that appears to be an fbnic-only spelling.
We could spell out RXH_IP6_FLOW_LABEL but existing
RXH_ defines are a lot more terse.
Willem notes [1] that Flow Label is defined as identifying the flow
and therefore including both the flow label _and_ the L4 header
fields is not generally necessary. But it should not hurt so
it's not explicitly prevented if the driver supports hashing
on both at the same time.
Link: https://lore.kernel.org/68483433b45e2_3cd66f29440@willemb.c.googlers.com.notmuch [1]
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250811234212.580748-2-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Use min() to simplify snd_hda_get_devices() and improve its readability.
Change the function parameter 'max_devices' from 'int' to 'unsigned int'
to avoid a min() signedness error. Update all related local variables
and the function's return type to 'unsigned int' accordingly.
No functional changes intended.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20250813205507.215658-2-thorsten.blum@linux.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
syzbot found a race condition when kcm_unattach(psock)
and kcm_release(kcm) are executed at the same time.
kcm_unattach() is missing a check of the flag
kcm->tx_stopped before calling queue_work().
If the kcm has a reserved psock, kcm_unattach() might get executed
between cancel_work_sync() and unreserve_psock() in kcm_release(),
requeuing kcm->tx_work right before kcm gets freed in kcm_done().
Remove kcm->tx_stopped and replace it by the less
error-prone disable_work_sync().
Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module")
Reported-by: syzbot+e62c9db591c30e174662@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e62c9db591c30e174662
Reported-by: syzbot+d199b52665b6c3069b94@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=d199b52665b6c3069b94
Reported-by: syzbot+be6b1fdfeae512726b4e@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=be6b1fdfeae512726b4e
Signed-off-by: Sven Stegemann <sven@stegemann.de>
Link: https://patch.msgid.link/20250812191810.27777-1-sven@stegemann.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Tony Nguyen says:
====================
ixgbe: bypass devlink phys_port_name generation
Jedrzej adds option to skip phys_port_name generation and opts
ixgbe into it as some configurations rely on pre-devlink naming
which could end up broken as a result.
* '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ixgbe: prevent from unwanted interface name changes
devlink: let driver opt out of automatic phys_port_name generation
====================
Link: https://patch.msgid.link/20250812205226.1984369-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce the second WDMA RX ring in WED driver for MT7988 SoC since the
Mediatek MT7992 WiFi chipset supports two separated WDMA rings.
Add missing MT7988 configurations to properly support WED for MT7992 in
MT76 driver.
Co-developed-by: Rex Lu <rex.lu@mediatek.com>
Signed-off-by: Rex Lu <rex.lu@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250812-mt7992-wed-support-v3-1-9ada78a819a4@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In order to use netdev_err() to print message in the callback function of
fix_soc_reset(), change fix_soc_reset() to have "struct stmmac_priv *" as
its first parameter.
This is preparation for later patch, no functionality change.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://patch.msgid.link/20250811073506.27513-3-yangtiezhu@loongson.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the past %pK was preferable to %p as it would not leak raw pointer
values into the kernel log.
Since commit ad67b74d2469 ("printk: hash addresses printed with %p")
the regular %p has been improved to avoid this issue.
Furthermore, restricted pointers ("%pK") were never meant to be used
through printk(). They can still unintentionally leak raw pointers or
acquire sleeping locks in atomic contexts.
Switch to the regular pointer formatting which is safer and
easier to reason about.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250811-restricted-pointers-bpf-v1-1-a1d7cc3cb9e7@linutronix.de
|
|
Short summary of fixes pull:
bridge:
- fix OF-node leak
- fix documentation
fbdev-emulation:
- pass correct format info to drm_helper_mode_fill_fb_struct()
panfrost:
- print correct RSS size
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250812064712.GA14554@2a02-2454-fd5e-fd00-2c49-c639-c55f-a125.dyn6.pyur.net
|
|
The CS_ONLINE flag was introduced prior to the CSS_ONLINE flag in the
cpuset subsystem. Currently, the flag setting sequence is as follows:
1. cpuset_css_online() sets CS_ONLINE
2. css->flags gets CSS_ONLINE set
...
3. cgroup->kill_css sets CSS_DYING
4. cpuset_css_offline() clears CS_ONLINE
5. css->flags clears CSS_ONLINE
The is_cpuset_online() check currently occurs between steps 1 and 3.
However, it would be equally safe to perform this check between steps 2
and 3, as CSS_ONLINE provides the same synchronization guarantee as
CS_ONLINE.
Since CS_ONLINE is redundant with CSS_ONLINE and provides no additional
synchronization benefits, we can safely remove it to simplify the code.
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
kcov_remote_start_usb_softirq() the begin of urb's completion callback.
HCDs marked HCD_BH will invoke this function from the softirq and
in_serving_softirq() will detect this properly.
Root-HUB (RH) requests will not be delayed to softirq but complete
immediately in IRQ context.
This will confuse kcov because in_serving_softirq() will report true if
the softirq is served after the hardirq and if the softirq got
interrupted by the hardirq in which currently runs.
This was addressed by simply disabling interrupts in
kcov_remote_start_usb_softirq() which avoided the interruption by the RH
while a regular completion callback was invoked.
This not only changes the behaviour while kconv is enabled but also
breaks PREEMPT_RT because now sleeping locks can no longer be acquired.
Revert the previous fix. Address the issue by invoking
kcov_remote_start_usb() only if the context is just "serving softirqs"
which is identified by checking in_serving_softirq() and in_hardirq()
must be false.
Fixes: f85d39dd7ed89 ("kcov, usb: disable interrupts in kcov_remote_start_usb_softirq")
Cc: stable <stable@kernel.org>
Reported-by: Yunseong Kim <ysk@kzalloc.com>
Closes: https://lore.kernel.org/all/20250725201400.1078395-2-ysk@kzalloc.com/
Tested-by: Yunseong Kim <ysk@kzalloc.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20250811082745.ycJqBXMs@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Introduce a helper for v4l2 sensor drivers on both DT- and ACPI-based
platforms to retrieve a reference to the clock producer from firmware.
This helper behaves the same as devm_clk_get() except where there is
no clock producer like in ACPI-based platforms.
For ACPI-based platforms the function will read the "clock-frequency"
ACPI _DSD property and register a fixed frequency clock with the frequency
indicated in the property.
This function also handles the special ACPI-based system case where:
. The clock-frequency _DSD property is present.
. A reference to the clock producer is present, where the clock is provided
by a camera sensor PMIC driver (e.g. int3472/tps68470.c)
In this case try to set the clock-frequency value to the provided clock.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Enable user-space to inject an event into a CM through it's event
channel. Two new events are added and supported: RDMA_CM_EVENT_USER and
RDMA_CM_EVENT_INTERNAL. With these 2 events a new event parameter "arg"
is supported, which is passed from sender to receiver transparently.
With this feature an application is able to write an event into a CM
channel with a new user-space rdmacm API. For example thread T1 could
write an event with the API:
rdma_write_cm_event(cm_id, RDMA_CM_EVENT_USER, status, arg);
and thread T2 could receive the event with rdma_get_cm_event().
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Reviewed-by: Vlad Dumitrescu <vdumitrescu@nvidia.com>
Link: https://patch.msgid.link/fdf49d0b17a45933c5d8c1d90605c9447d9a3c73.1751279794.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Enable user-space to query resolved service records through a ucma
command when a RDMA_CM_EVENT_ADDRINFO_RESOLVED event is received.
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Reviewed-by: Vlad Dumitrescu <vdumitrescu@nvidia.com>
Link: https://patch.msgid.link/1090ee7c00c3f8058c4f9e7557de983504a16715.1751279794.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Add new UCMA command and the corresponding CMA implementation. Userspace
can send this command to request service resolution based on service
name or ID.
On a successful resolution, one or multiple service records are
returned, the first one will be used as destination address by default.
Two new CM events are added and returned to caller accordingly:
- RDMA_CM_EVENT_ADDRINFO_RESOLVED: Resolve succeeded;
- RDMA_CM_EVENT_ADDRINFO_ERROR: Resolve failed.
Internally two new CM states are added:
- RDMA_CM_ADDRINFO_QUERY: CM is in the process of IB service
resolution;
- RDMA_CM_ADDRINFO_RESOLVED: CM has finished the resolve process.
With these new states, beside existing state transfer processes, 2 new
processes are supported:
1. The default address is used:
RDMA_CM_ADDR_BOUND ->
RDMA_CM_ADDRINFO_QUERY ->
RDMA_CM_ADDRINFO_RESOLVED ->
RDMA_CM_ROUTE_QUERY
2. To use a different address:
RDMA_CM_ADDR_BOUND ->
RDMA_CM_ADDRINFO_QUERY->
RDMA_CM_ADDRINFO_RESOLVED ->
RDMA_CM_ADDR_QUERY ->
RDMA_CM_ADDR_RESOLVED ->
RDMA_CM_ROUTE_QUERY
In the 2nd case, resolve_addrinfo returns multiple records, a user
could call rdma_resolve_addr() with the one that is not the first.
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Reviewed-by: Vlad Dumitrescu <vdumitrescu@nvidia.com>
Link: https://patch.msgid.link/b6e82ad75522a13b5efe4ff86da0e465aab04cc2.1751279794.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Add an SA query API ib_sa_service_rec_get() to support building and
sending SA query MADs that ask for service records with a specific
name or ID, and receiving and parsing responses from the SM.
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Reviewed-by: Vlad Dumitrescu <vdumitrescu@nvidia.com>
Link: https://patch.msgid.link/9af6c82f3a3a9d975115a33235fb4ffc7c8edb21.1751279793.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The __clear_task_blocked_on() helper added a number of sanity
checks ensuring we hold the mutex wait lock and that the task
we are clearing blocked_on pointer (if set) matches the mutex.
However, there is an edge case in the _ww_mutex_wound() logic
where we need to clear the blocked_on pointer for the task that
owns the mutex, not the task that is waiting on the mutex.
For this case the sanity checks aren't valid, so handle this
by allowing a NULL lock to skip the additional checks.
K Prateek Nayak and Maarten Lankhorst also pointed out that in
this case where we don't hold the owner's mutex wait_lock, we
need to be a bit more careful using READ_ONCE/WRITE_ONCE in both
the __clear_task_blocked_on() and __set_task_blocked_on()
implementations to avoid accidentally tripping WARN_ONs if two
instances race. So do that here as well.
This issue was easier to miss, I realized, as the test-ww_mutex
driver only exercises the wait-die class of ww_mutexes. I've
sent a patch[1] to address this so the logic will be easier to
test.
[1]: https://lore.kernel.org/lkml/20250801023358.562525-2-jstultz@google.com/
Fixes: a4f0b6fef4b0 ("locking/mutex: Add p->blocked_on wrappers for correctness checks")
Closes: https://lore.kernel.org/lkml/68894443.a00a0220.26d0e1.0015.GAE@google.com/
Reported-by: syzbot+602c4720aed62576cd79@syzkaller.appspotmail.com
Reported-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: K Prateek Nayak <kprateek.nayak@amd.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20250805001026.2247040-1-jstultz@google.com
|
|
Instances are happier that way and it makes more sense anyway -
the only part of the result that is related to partition we are given
is the start sector, and that has been filled in by the caller.
Everything else is a function of the disk. Only one instance
(DASD) is ever looking at anything other than bdev->bd_disk and
that one is trivial to adjust.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Instances are passed struct block_device *bdev argument; the only thing
it is used for (if it's used in the first place) is bdev->bd_disk.
Might as well pass that in the first place...
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Both helpers are reading the partition table of the disk specified
by block_device of some partition on it; result depends only upon
the disk in question, so we might as well pass the struct gendisk
instead.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The estimator kthreads' affinity are defined by sysctl overwritten
preferences and applied through a plain call to the scheduler's affinity
API.
However since the introduction of managed kthreads preferred affinity,
such a practice shortcuts the kthreads core code which eventually
overwrites the target to the default unbound affinity.
Fix this with using the appropriate kthread's API.
Fixes: d1a89197589c ("kthread: Default affine kthread to its preferred NUMA node")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
The second argument to the ioctl handlers is not a file handle any more.
Rename it from 'void *fh' to 'void *priv' in the V4L2 core, to avoid
misconceptions.
While at it, align function arguments in include/media/v4l2-mem2mem.h.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Now that all drivers access the v4l2_fh from the file structure, there
is no need to pass it as an explicit argument to ioctl handlers. Set the
argument to NULL in the __video_do_ioctl() function, and rename the 'fh'
argument in the ioctl handler declarations to 'priv' indicate it does
not contain a file handle.
The argument could be removed altogether with a mechanical change
(probably using coccinelle), but there are plans to pass a new argument
to the ioctl handlers in the near future. The tree-wide change to remove
the argument, only to add another one soon after, would be too much
churn.
While at it, fix argument alignment in vidioc_try_fmt_vid_out_overlay().
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Now that all drivers use v4l2_fh, we can drop the V4L2_FL_USES_V4L2_FH
checks through the V4L2 core.
To ensure that all new drivers use v4l2_fh, keep setting the
V4L2_FL_USES_V4L2_FH flag in v4l2_fh_init(), and verify it is set after
the .open() file operation returns.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Multiple drivers that use v4l2_fh and call v4l2_fh_del() manually reset
the file->private_data pointer to NULL in their video device .release()
file operation handler. Move the code to the v4l2_fh_del() function to
avoid direct access to file->private_data in drivers. This requires
adding a file pointer argument to the function.
Changes to drivers have been generated with the following coccinelle
semantic patch:
@@
expression fh;
identifier filp;
identifier release;
type ret;
@@
ret release(..., struct file *filp, ...)
{
<...
- filp->private_data = NULL;
...
- v4l2_fh_del(fh);
+ v4l2_fh_del(fh, filp);
...>
}
@@
expression fh;
identifier filp;
identifier release;
type ret;
@@
ret release(..., struct file *filp, ...)
{
<...
- v4l2_fh_del(fh);
+ v4l2_fh_del(fh, filp);
...
- filp->private_data = NULL;
...>
}
@@
expression fh;
identifier filp;
identifier release;
type ret;
@@
ret release(..., struct file *filp, ...)
{
<...
- v4l2_fh_del(fh);
+ v4l2_fh_del(fh, filp);
...>
}
Manual changes have been applied to Documentation/ to update the usage
patterns, to drivers/media/v4l2-core/v4l2-fh.c to update the
v4l2_fh_del() prototype and reset file->private_data, and to
include/media/v4l2-fh.h to update the v4l2_fh_del() function prototype
and its documentation.
Additionally, white space issues have been fixed manually in
drivers/usb/gadget/function/uvc_v4l2.c
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
All the drivers that use v4l2_fh and call v4l2_fh_add() manually store a
pointer to the v4l2_fh instance in file->private_data in their video
device .open() file operation handler. Move the code to the
v4l2_fh_add() function to avoid direct access to file->private_data in
drivers. This requires adding a file pointer argument to the function.
Changes to drivers have been generated with the following coccinelle
semantic patch:
@@
expression fh;
identifier filp;
identifier open;
type ret;
@@
ret open(..., struct file *filp, ...)
{
<...
- filp->private_data = fh;
...
- v4l2_fh_add(fh);
+ v4l2_fh_add(fh, filp);
...>
}
@@
expression fh;
identifier filp;
identifier open;
type ret;
@@
ret open(..., struct file *filp, ...)
{
<...
- v4l2_fh_add(fh);
+ v4l2_fh_add(fh, filp);
...
- filp->private_data = fh;
...>
}
Manual changes have been applied to Documentation/ to update the usage
patterns, to drivers/media/v4l2-core/v4l2-fh.c to update the
v4l2_fh_add() prototype set file->private_data, and to
include/media/v4l2-fh.h to update the v4l2_fh_add() function prototype
and its documentation.
Additionally, white space issues have been fixed manually in
drivers/media/platform/nvidia/tegra-vde/v4l2.c,
drivers/media/platform/rockchip/rkvdec/rkvdec.c,
drivers/media/v4l2-core/v4l2-fh.c and
drivers/staging/most/video/video.c.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The paragraph in the v4l2_fh_del() documentation that indicates the
function sets filp->private_data was added in the wrong place. It is
meant for v4l2_fh_open(). Move it to where it belongs.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Accessing file->private_data manually to retrieve the v4l2_fh pointer is
error-prone, as the field is a void * and will happily convert
implicitly to any pointer type. To avoid direct access to
file->private_data, introduce a new inline function that retrieves the
v4l2_fh pointer, and use it to replace common access patterns through
the kernel.
Changes to drivers have been generated with the following coccinelle
semantic patch:
@@
struct file *filp;
identifier fh;
@@
- struct v4l2_fh *fh = filp->private_data;
+ struct v4l2_fh *fh = file_to_v4l2_fh(filp);
Manual changes have been applied to Documentation/ to update the usage
patterns, and to include/media/v4l2-fh.h to add the new function.
While at it, fix a typo in the title of v4l2-fh.rst: the file describes
the "file handles" API, not "file handlers".
No functional change is intended, this only paves the way to remove
direct accesses to file->private_data and make V4L2 drivers safer.
Other accesses to the field will be addressed separately.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Move NPU definitions to airoha_offload.h in include/linux/soc/airoha/ in
order to allow the MT76 driver to access the callback definitions.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250811-airoha-en7581-wlan-offlaod-v7-7-58823603bb4e@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add suspend/resume platform operations, which, when populated, override
the init/exit platform operations when we suspend and resume. These
suspend()/resume() methods are called by core code, and thus are
designed to support any struct device, not just platform devices. This
allows them to be used by the PCI drivers we have.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1ulXbX-008gqZ-Bb@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Yonghong noticed that error messages for potential verifier bugs often
have a '(1)' at the end. This is happening because verifier_bug_if(cond,
env, fmt, args...) prints "(" #cond ")\n" as part of the message and
verifier_bug() is defined as:
#define verifier_bug(env, fmt, args...) verifier_bug_if(1, env, fmt, ##args)
Hence, verifier_bug() always ends up displaying '(1)'. This small patch
fixes it by having verifier_bug_if conditionally call verifier_bug
instead of the other way around.
Fixes: 1cb0f56d9618 ("bpf: WARN_ONCE on verifier bugs")
Reported-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/aJo9THBrzo8jFXsh@mail.gmail.com
|
|
This input driver predates proper GPIO driver for the chip and now can
be replaced with the generic gpio-keys. Remove the driver.
Link: https://lore.kernel.org/r/ajfsei3keh4jjasd4lshjicgqixew7bak3cmty3suoliskzgz4@vj3ijycfxy4i
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Currently when adding devlink port, phys_port_name is automatically
generated within devlink port initialization flow. As a result adding
devlink port support to driver may result in forced changes of interface
names, which breaks already existing network configs.
This is an expected behavior but in some scenarios it would not be
preferable to provide such limitation for legacy driver not being able to
keep 'pre-devlink' interface name.
Add flag no_phys_port_name to devlink_port_attrs struct which indicates
if devlink should not alter name of interface.
Suggested-by: Jiri Pirko <jiri@resnulli.us>
Link: https://lore.kernel.org/all/nbwrfnjhvrcduqzjl4a2jafnvvud6qsbxlvxaxilnryglf4j7r@btuqrimnfuly/
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Cross merge bpf/master after 6.17-rc1.
No conflict.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Merge the IPQ5424 application subsystem clock binding, in order to get
access to the necessary clock constants for CPUfreq.
|
|
When dlm_lockspace_release() is passed DLM_RELEASE_RECOVER, it
tells the dlm to handle the release/leave as if the node had failed,
i.e. perform recovery steps for a failed node, like recover_slot().
When DLM_RELEASE_RECOVER is set:
- dlm_release_lockspace() includes RELEASE_RECOVER=1 in the OFFLINE
uevent sent to userspace.
- userspace/dlm_controld sends a message to all lockspace members
indicating that the subsequent node removal should be handled as
if the node had failed.
- when dlm_controld on all nodes receives the new message, it sets
the release_recover configfs entry to 1 for the node.
- when the dlm/kernel next performs recovery and removes the node,
it will see that release_recover has been set, and will perform
recovery steps for the node as if it had failed, e.g. the
recover_slot() callback is called to notify the fs.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
Clarify the use of the force parameter by renaming it to
"release_option" and adding defines (with descriptions) for
each of the accepted values.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
The code presented here is a lighter version of what was initially
discussed in 2021 [1]. Later, we've had a more general discussion [2]
"what if the feature was part of the ASoC core instead?". The discussion
turned towards leaving a simplified version within the avs/, so here is
the final outcome.
What's removed when compared to the older [1] version?
- conditional path priorities
- conditional path overriding
The background:
Conditional path (condpath) helps facilitate modern audio usecases such
as Echo Cancellations and Noise Reduction. These are not invoked by the
means of userspace application opening an endpoint (FrontEnd) but are a
"side effect" of selected PCMs running simultaneously e.g.: if both
Speaker (source) and Microphone Array (sink) are running, reference
data from the Speaker and take it into account when processing capture
for better voice command detection ratio.
Which PCMs are needed for given conditional path to be spawned is
determinated by the driver when registering the condpath.
Two patches implement the feature:
1) update the topology parser to acknowledge the new tuples
2) update the path-creation and functions that participate in the
PCM-runtime e.g.: run/pause.
The runtime update is needed to keep streaming sane - all the path
operations shall be synchronized when a condpath is being spawned or its
status is about to change.
[1]: https://lore.kernel.org/alsa-devel/20211208111301.1817725-21-cezary.rojewski@intel.com/
[2]: https://lore.kernel.org/linux-sound/20240821101816.1494541-1-cezary.rojewski@intel.com/
|
|
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
Because struct snd_soc_dapm_context is soc-dapm framework specific, user
driver don't need to access its member directly, we would like to hide
them. struct snd_soc_dapm_context will be removed from header in the
future.
This is prepare patch for it.
|
|
Merge the addition of reset constants to the SC7280 display clock
controller binding through a topic branch to allow it to be included in
the DeviceTree branch as well.
|
|
Like other platforms the sc7280 display clock controller provides a
couple of resets, add the defines to allow referring to them.
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Reviewed-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250811-sc7280-mdss-reset-v1-1-83ceff1d48de@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Bring v6.17-rc1 to propagate commits from other subsystems, particularly
PCI, which has some new functions needed for SR-IOV integration.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
We have to make sure that all future NAPIs will have the right threaded
state when the state is configured on the device level.
We chose not to have an "unset" state for threaded, and not to wipe
the NAPI config clean when channels are explicitly disabled.
This means the persistent config structs "exist" even when their NAPIs
are not instantiated.
Differently put - the NAPI persistent state lives in the net_device
(ncfg == struct napi_config):
,--- [napi 0] - [napi 1]
[dev] | |
`--- [ncfg 0] - [ncfg 1]
so say we a device with 2 queues but only 1 enabled:
,--- [napi 0]
[dev] |
`--- [ncfg 0] - [ncfg 1]
now we set the device to threaded=1:
,---------- [napi 0 (thr:1)]
[dev(thr:1)] |
`---------- [ncfg 0 (thr:1)] - [ncfg 1 (thr:?)]
Since [ncfg 1] was not attached to a NAPI during configuration we
skipped it. If we create a NAPI for it later it will have the old
setting (presumably disabled). One could argue if this is right
or not "in principle", but it's definitely not how things worked
before per-NAPI config..
Fixes: 2677010e7793 ("Add support to set NAPI threaded for individual NAPI")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250809001205.1147153-3-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Make the header self contained for including.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20250715122643.137027-6-tzimmermann@suse.de
|
|
This patch introduces LSM blob support for BPF maps, programs, and
tokens to enable LSM stacking and multiplexing of LSM modules that
govern BPF objects. Additionally, the existing BPF hooks used by
SELinux have been updated to utilize the new blob infrastructure,
removing the assumption of exclusive ownership of the security
pointer.
Signed-off-by: Blaise Boscaccy <bboscaccy@linux.microsoft.com>
[PM: dropped local variable init, style fixes]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Rename run_irq_test() to kunit_run_irq_test() and move it to a public
header so that it can be reused by crc_kunit.
Link: https://lore.kernel.org/r/20250811182631.376302-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
When no audit rules are in place, fanotify event results are
unconditionally dropped due to an explicit check for the existence of
any audit rules. Given this is a report from another security
sub-system, allow it to be recorded regardless of the existence of any
audit rules.
To test, install and run the fapolicyd daemon with default config. Then
as an unprivileged user, create and run a very simple binary that should
be denied. Then check for an event with
ausearch -m FANOTIFY -ts recent
Link: https://issues.redhat.com/browse/RHEL-9065
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
The current iosys_map_clear() implementation reads the potentially
uninitialized 'is_iomem' boolean field to decide which union member
to clear. This causes undefined behavior when called on uninitialized
structures, as 'is_iomem' may contain garbage values like 0xFF.
UBSAN detects this as:
UBSAN: invalid-load in include/linux/iosys-map.h:267
load of value 255 is not a valid value for type '_Bool'
Fix by unconditionally clearing the entire structure with memset(),
eliminating the need to read uninitialized data and ensuring all
fields are set to known good values.
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14639
Fixes: 01fd30da0474 ("dma-buf: Add struct dma-buf-map for storing struct dma_buf.vaddr_ptr")
Signed-off-by: Nitin Gote <nitin.r.gote@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250718105051.2709487-1-nitin.r.gote@intel.com
|
Linus Torvalds
Sakari Ailus
Icenowy Zheng
Jakub Kicinski
Thorsten Blum
Sven Stegemann
Lorenzo Bianconi
Tiezhu Yang
Thomas Weißschuh
Dave Airlie
Chen Ridong
Sebastian Andrzej Siewior
Mehdi Djait
Mark Zhang
John Stultz
Al Viro
Frederic Weisbecker
Laurent Pinchart
Russell King (Oracle)
Paul Chaignon
Dmitry Torokhov
Jedrzej Jagielski
Martin KaFai Lau
Bjorn Andersson
Alexander Aring
Mark Brown
Bjorn Andersson
Lucas De Marchi
Thomas Zimmermann
Blaise Boscaccy
Eric Biggers
Richard Guy Briggs
Nitin Gote