| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Call cs_dsp_mock_xm_header_get_fw_version() to get the firmware version
from the dummy XM header data in cs_dsp_bin_err_test_common_init().
Make the same change to cs_dsp_bin_test_common_init() and remove the
cs_dsp_mock_xm_header_get_fw_version_from_regmap() function.
The code in cs_dsp_test_bin.c was correctly calling
cs_dsp_mock_xm_header_get_fw_version_from_regmap() to fetch the fw version
from a dummy header it wrote to XM registers. However in
cs_dsp_test_bin_error.c the test doesn't stuff a dummy header into XM, it
populates it the normal way using a wmfw file. It should have called
cs_dsp_mock_xm_header_get_fw_version() to get the data from its blob
buffer, but was calling cs_dsp_mock_xm_header_get_fw_version_from_regmap().
As nothing had been written to the registers this returned the value of
uninitialized data.
The only other use of cs_dsp_mock_xm_header_get_fw_version_from_regmap()
was cs_dsp_test_bin.c, but it doesn't need to use it. It already has a
blob buffer containing the dummy XM header so it can use
cs_dsp_mock_xm_header_get_fw_version() to read from that.
Fixes: cd8c058499b6 ("firmware: cs_dsp: Add KUnit testing of bin error cases")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250410132129.1312541-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Implement support for Exynos7870 USB DRD on top of the existing
exynos5-usbdrd driver.
Exynos7870 has a single USB 2.0 DRD PHY controller and no 3.0 PHYs. Thus,
it only supports the UTMI interface.
Moreover, the PMU register offset for enabling the PHY controller is
different for SoCs such as Exynos7870, where BIT(0) is for the 3.0 PHY and
BIT(1) is for the 2.0 PHY. The phy_isol function for Exynos7870 uses the
appropriate register offsets.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Link: https://lore.kernel.org/r/20250410-exynos7870-usbphy-v2-3-2eb005987455@disroot.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
A recent change has introduced a bug into cpufreq_get_policy(), but this
function is not used, so it's better to drop it altogether.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://patch.msgid.link/2802770.mvXUDI8C0e@rjwysocki.net
|
|
Suggested-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Xin Li <xin@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Suggested-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Xin Li <xin@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The constants FB_EVENT_MODE_CHANGE and FB_EVENT_BLANK are unused.
Remove them from the header file.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20250321095517.313713-12-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Remove support for fb events from the led backlight trigger. Provide
the helper ledtrig_backlight_blank() instead. Call it from fbdev to
inform the trigger of changes to a display's blank state.
Fbdev maintains a list of all installed notifiers. Instead of the fbdev
notifiers, maintain an internal list of led backlight triggers.
v3:
- export ledtrig_backlight_blank()
v2:
- maintain global list of led backlight triggers (Lee)
- avoid IS_REACHABLE() in source file (Lee)
- notify on changes to blank state instead of display state
- use lock guards
- initialize led list and list mutex
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20250321095517.313713-11-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Remove support for fb events from the lcd subsystem. Provide the
helper lcd_notify_blank_all() instead. In fbdev, call
lcd_notify_blank_all() to inform the lcd subsystem of changes
to a display's blank state.
Fbdev maintains a list of all installed notifiers. Instead of fbdev
notifiers, maintain an internal list of lcd devices.
v3:
- export lcd_notify_mode_change_all() (kernel test robot)
v2:
- maintain global list of lcd devices
- avoid IS_REACHABLE() in source file
- use lock guards
- initialize lcd list and list mutex
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Reviewed-by: "Daniel Thompson (RISCstar)" <danielt@kernel.org>
Link: https://lore.kernel.org/r/20250321095517.313713-9-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Remove support for fb events from backlight subsystem. Provide the
helper backlight_notify_blank_all() instead. Also export the existing
helper backlight_notify_blank() to update a single backlight device.
In fbdev, call either helper to inform the backlight subsystem of
changes to a display's blank state. If the framebuffer device has a
specific backlight, only update this one; otherwise update all.
v4:
- protect blacklight declarations with IS_REACHABLE() (kernel test robot)
v3:
- declare empty fb_bl_notify_blank() as static inline (kernel test robot)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Reviewed-by: "Daniel Thompson (RISCstar)" <danielt@kernel.org>
Link: https://lore.kernel.org/r/20250321095517.313713-7-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Look at the blank state provided by FB_EVENT_BLANK to determine
whether to enable or disable a backlight. Remove the tracking fields
from struct backlight_device.
Tracking requires three variables, fb_on, prev_fb_on and the
backlight's use_count. If fb_on is true, the display has been
unblanked. The backlight needs to be enabled if the display was
blanked before (i.e., prev_fb_on is false) or if use_count is still
at 0. If fb_on is false, the display has been blanked. In this case,
the backlight has to be disabled was unblanked before and the
backlight's use_count is greater than 0.
This change removes fbdev state tracking from blacklight. All the
backlight requires it its own use counter and information about
changes to the display. Removing fbdev internals makes backlight
drivers easier to integrate into other display drivers, such as DRM.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: "Daniel Thompson (RISCstar)" <danielt@kernel.org>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20250321095517.313713-5-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Store the display's blank status in struct fb_info.blank and track
it in fb_blank(). As an extra, the status is now available from the
sysfs blank attribute.
Support for blanking is optional. Therefore framebuffer_alloc()
initializes the state to FB_BLANK_UNBLANK (i.e., the display is
on). If the fb_blank callback has been set, register_framebuffer()
sets the state to FB_BLANK_POWERDOWN. On the first modeset, the
call to fb_blank() will update it to _UNBLANK. This is important,
as listeners to FB_EVENT_BLANK will now see the display being
switched on.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20250321095517.313713-3-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The new helper is introduced to allow counting the child firmware nodes
of their parent without requiring a device to be passed. This also makes
the fwnode and device property API more symmetrical with the rest.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: "Rafael J. Wysocki" <rafael@kernel.org>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20250310150835.3139322-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Compiling the kernel with gcc12.3 W=2 results in shadowing warnings:
warning: declaration of '__pptr' shadows a previous local [-Wshadow]
const struct { type x; } __packed *__pptr = (typeof(__pptr))(ptr);
note: in definition of macro '__put_unaligned_t'
__pptr->x = (val);
note: in expansion of macro '__get_unaligned_t'
__put_unaligned_t(type, __get_unaligned_t(type, src), dst);
__get_unaligned_t() and __put_unaligned_t() use a local variable named
'__pptr', which can lead to variable shadowing when these macros are used in
the same scope. This results in a -Wshadow warning during compilation.
To address this issue, rename the local variables within the macros to
ensure uniqueness.
Signed-off-by: Peng Jiang <jiang.peng9@zte.com.cn>
Signed-off-by: Shao Mingyin <shao.mingyin@zte.com.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250324191230477zpGtgIRSH4mEHdtxGtgx9@zte.com.cn
|
|
Some drivers like virtio-gpu, don't map the scanout buffer in the
kernel. Calling vmap() in a panic handler is not safe, and writing an
atomic_vmap() API is more complex than expected [1].
So instead, pass the array of pages of the scanout buffer to the
panic handler, and map only one page at a time to draw the pixels.
This is obviously slow, but acceptable for a panic handler.
[1] https://lore.kernel.org/dri-devel/20250305152555.318159-1-ryasuoka@redhat.com/
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Simona Vetter <simona@ffwll.ch>
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250407140138.162383-3-jfalempe@redhat.com
|
|
kmap_local_page() can be unsafe to call from a panic handler, if
CONFIG_HIGHMEM is set, and the page is in the highmem zone.
So add kmap_local_page_try_from_panic() to handle this case.
Suggested-by: Simona Vetter <simona.vetter@ffwll.ch>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250407140138.162383-2-jfalempe@redhat.com
|
|
In the bpf_l4_csum_replace helper, the BPF_F_PSEUDO_HDR flag should only
be set if the modified header field is part of the pseudo-header.
If you modify for example the UDP ports and pass BPF_F_PSEUDO_HDR,
inet_proto_csum_replace4 will update skb->csum even though it shouldn't
(the port and the UDP checksum updates null each other).
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Link: https://lore.kernel.org/r/5126ef84ba75425b689482cbc98bffe75e5d8ab0.1744102490.git.paul.chaignon@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
BPF_F_RECOMPUTE_CSUM doesn't update the actual L3 and L4 checksums in
the packet, but simply updates skb->csum (according to skb->ip_summed).
This patch clarifies that to avoid confusions.
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Link: https://lore.kernel.org/r/ff6895d42936f03dbb82334d8bcfd50e00c79086.1744102490.git.paul.chaignon@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When I ran the repro [0] and waited a few seconds, I observed two
LOCKDEP splats: a warning immediately followed by a null-ptr-deref. [1]
Reproduction Steps:
1) Mount CIFS
2) Add an iptables rule to drop incoming FIN packets for CIFS
3) Unmount CIFS
4) Unload the CIFS module
5) Remove the iptables rule
At step 3), the CIFS module calls sock_release() for the underlying
TCP socket, and it returns quickly. However, the socket remains in
FIN_WAIT_1 because incoming FIN packets are dropped.
At this point, the module's refcnt is 0 while the socket is still
alive, so the following rmmod command succeeds.
# ss -tan
State Recv-Q Send-Q Local Address:Port Peer Address:Port
FIN-WAIT-1 0 477 10.0.2.15:51062 10.0.0.137:445
# lsmod | grep cifs
cifs 1159168 0
This highlights a discrepancy between the lifetime of the CIFS module
and the underlying TCP socket. Even after CIFS calls sock_release()
and it returns, the TCP socket does not die immediately in order to
close the connection gracefully.
While this is generally fine, it causes an issue with LOCKDEP because
CIFS assigns a different lock class to the TCP socket's sk->sk_lock
using sock_lock_init_class_and_name().
Once an incoming packet is processed for the socket or a timer fires,
sk->sk_lock is acquired.
Then, LOCKDEP checks the lock context in check_wait_context(), where
hlock_class() is called to retrieve the lock class. However, since
the module has already been unloaded, hlock_class() logs a warning
and returns NULL, triggering the null-ptr-deref.
If LOCKDEP is enabled, we must ensure that a module calling
sock_lock_init_class_and_name() (CIFS, NFS, etc) cannot be unloaded
while such a socket is still alive to prevent this issue.
Let's hold the module reference in sock_lock_init_class_and_name()
and release it when the socket is freed in sk_prot_free().
Note that sock_lock_init() clears sk->sk_owner for svc_create_socket()
that calls sock_lock_init_class_and_name() for a listening socket,
which clones a socket by sk_clone_lock() without GFP_ZERO.
[0]:
CIFS_SERVER="10.0.0.137"
CIFS_PATH="//${CIFS_SERVER}/Users/Administrator/Desktop/CIFS_TEST"
DEV="enp0s3"
CRED="/root/WindowsCredential.txt"
MNT=$(mktemp -d /tmp/XXXXXX)
mount -t cifs ${CIFS_PATH} ${MNT} -o vers=3.0,credentials=${CRED},cache=none,echo_interval=1
iptables -A INPUT -s ${CIFS_SERVER} -j DROP
for i in $(seq 10);
do
umount ${MNT}
rmmod cifs
sleep 1
done
rm -r ${MNT}
iptables -D INPUT -s ${CIFS_SERVER} -j DROP
[1]:
DEBUG_LOCKS_WARN_ON(1)
WARNING: CPU: 10 PID: 0 at kernel/locking/lockdep.c:234 hlock_class (kernel/locking/lockdep.c:234 kernel/locking/lockdep.c:223)
Modules linked in: cifs_arc4 nls_ucs2_utils cifs_md4 [last unloaded: cifs]
CPU: 10 UID: 0 PID: 0 Comm: swapper/10 Not tainted 6.14.0 #36
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:hlock_class (kernel/locking/lockdep.c:234 kernel/locking/lockdep.c:223)
...
Call Trace:
<IRQ>
__lock_acquire (kernel/locking/lockdep.c:4853 kernel/locking/lockdep.c:5178)
lock_acquire (kernel/locking/lockdep.c:469 kernel/locking/lockdep.c:5853 kernel/locking/lockdep.c:5816)
_raw_spin_lock_nested (kernel/locking/spinlock.c:379)
tcp_v4_rcv (./include/linux/skbuff.h:1678 ./include/net/tcp.h:2547 net/ipv4/tcp_ipv4.c:2350)
...
BUG: kernel NULL pointer dereference, address: 00000000000000c4
PF: supervisor read access in kernel mode
PF: error_code(0x0000) - not-present page
PGD 0
Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 10 UID: 0 PID: 0 Comm: swapper/10 Tainted: G W 6.14.0 #36
Tainted: [W]=WARN
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:__lock_acquire (kernel/locking/lockdep.c:4852 kernel/locking/lockdep.c:5178)
Code: 15 41 09 c7 41 8b 44 24 20 25 ff 1f 00 00 41 09 c7 8b 84 24 a0 00 00 00 45 89 7c 24 20 41 89 44 24 24 e8 e1 bc ff ff 4c 89 e7 <44> 0f b6 b8 c4 00 00 00 e8 d1 bc ff ff 0f b6 80 c5 00 00 00 88 44
RSP: 0018:ffa0000000468a10 EFLAGS: 00010046
RAX: 0000000000000000 RBX: ff1100010091cc38 RCX: 0000000000000027
RDX: ff1100081f09ca48 RSI: 0000000000000001 RDI: ff1100010091cc88
RBP: ff1100010091c200 R08: ff1100083fe6e228 R09: 00000000ffffbfff
R10: ff1100081eca0000 R11: ff1100083fe10dc0 R12: ff1100010091cc88
R13: 0000000000000001 R14: 0000000000000000 R15: 00000000000424b1
FS: 0000000000000000(0000) GS:ff1100081f080000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000c4 CR3: 0000000002c4a003 CR4: 0000000000771ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<IRQ>
lock_acquire (kernel/locking/lockdep.c:469 kernel/locking/lockdep.c:5853 kernel/locking/lockdep.c:5816)
_raw_spin_lock_nested (kernel/locking/spinlock.c:379)
tcp_v4_rcv (./include/linux/skbuff.h:1678 ./include/net/tcp.h:2547 net/ipv4/tcp_ipv4.c:2350)
ip_protocol_deliver_rcu (net/ipv4/ip_input.c:205 (discriminator 1))
ip_local_deliver_finish (./include/linux/rcupdate.h:878 net/ipv4/ip_input.c:234)
ip_sublist_rcv_finish (net/ipv4/ip_input.c:576)
ip_list_rcv_finish (net/ipv4/ip_input.c:628)
ip_list_rcv (net/ipv4/ip_input.c:670)
__netif_receive_skb_list_core (net/core/dev.c:5939 net/core/dev.c:5986)
netif_receive_skb_list_internal (net/core/dev.c:6040 net/core/dev.c:6129)
napi_complete_done (./include/linux/list.h:37 ./include/net/gro.h:519 ./include/net/gro.h:514 net/core/dev.c:6496)
e1000_clean (drivers/net/ethernet/intel/e1000/e1000_main.c:3815)
__napi_poll.constprop.0 (net/core/dev.c:7191)
net_rx_action (net/core/dev.c:7262 net/core/dev.c:7382)
handle_softirqs (kernel/softirq.c:561)
__irq_exit_rcu (kernel/softirq.c:596 kernel/softirq.c:435 kernel/softirq.c:662)
irq_exit_rcu (kernel/softirq.c:680)
common_interrupt (arch/x86/kernel/irq.c:280 (discriminator 14))
</IRQ>
<TASK>
asm_common_interrupt (./arch/x86/include/asm/idtentry.h:693)
RIP: 0010:default_idle (./arch/x86/include/asm/irqflags.h:37 ./arch/x86/include/asm/irqflags.h:92 arch/x86/kernel/process.c:744)
Code: 4c 01 c7 4c 29 c2 e9 72 ff ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa eb 07 0f 00 2d c3 2b 15 00 fb f4 <fa> c3 cc cc cc cc 66 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90
RSP: 0018:ffa00000000ffee8 EFLAGS: 00000202
RAX: 000000000000640b RBX: ff1100010091c200 RCX: 0000000000061aa4
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff812f30c5
RBP: 000000000000000a R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000002 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
? do_idle (kernel/sched/idle.c:186 kernel/sched/idle.c:325)
default_idle_call (./include/linux/cpuidle.h:143 kernel/sched/idle.c:118)
do_idle (kernel/sched/idle.c:186 kernel/sched/idle.c:325)
cpu_startup_entry (kernel/sched/idle.c:422 (discriminator 1))
start_secondary (arch/x86/kernel/smpboot.c:315)
common_startup_64 (arch/x86/kernel/head_64.S:421)
</TASK>
Modules linked in: cifs_arc4 nls_ucs2_utils cifs_md4 [last unloaded: cifs]
CR2: 00000000000000c4
Fixes: ed07536ed673 ("[PATCH] lockdep: annotate nfs/nfsd in-kernel sockets")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250407163313.22682-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
txq_trans_update() currently uses txq->xmit_lock_owner
to conditionally update txq->trans_start.
For regular devices, txq->xmit_lock_owner is updated
from HARD_TX_LOCK() and HARD_TX_UNLOCK(), and this apparently
causes cpu stalls.
Using dev->lltx, which sits in a read-mostly cache-line,
and already used in HARD_TX_LOCK() and HARD_TX_UNLOCK()
helps cpu prediction.
On an AMD EPYC 7B12 dual socket server, tcp_rr with 128 threads
and 30,000 flows gets a 5 % increase in throughput.
As explained in commit 95ecba62e2fd ("net: fix races in
netdev_tx_sent_queue()/dev_watchdog()") I am planning
to no longer update txq->trans_start in the fast path
in a followup patch.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250408202742.2145516-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We mostly needed rtnl_lock in qstat to make sure the queue count
is stable while we work. For "ops locked" drivers the instance
lock protects the queue count, so we don't have to take rtnl_lock.
For currently ops-locked drivers: netdevsim and bnxt need
the protection from netdev going down while we dump, which
instance lock provides. gve doesn't care.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250408195956.412733-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Protect xdp_features with netdev->lock. This way pure readers
no longer have to take rtnl_lock to access the field.
This includes calling NETDEV_XDP_FEAT_CHANGE under the lock.
Looks like that's fine for bonding, the only "real" listener,
it's the same as ethtool feature change.
In terms of normal drivers - only GVE need special consideration
(other drivers don't use instance lock or don't support XDP).
It calls xdp_set_features_flag() helper from gve_init_priv() which
in turn is called from gve_reset_recovery() (locked), or prior
to netdev registration. So switch to _locked.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Harshitha Ramamurthy <hramamurthy@google.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250408195956.412733-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add helpers to "lock a netdev in a backward-compatible way",
which for ops-locked netdevs will mean take the instance lock.
For drivers which haven't opted into the ops locking we'll take
rtnl_lock.
The scoped foreach is dropping and re-taking the lock for each
device, even if prev and next are both under rtnl_lock.
I hope that's fine since we expect that netdev nl to be mostly
supported by modern drivers, and modern drivers should also
opt into the instance locking.
Note that these helpers are mostly needed for queue related state,
because drivers modify queue config in their ops in a non-atomic
way. Or differently put, queue changes don't have a clear-cut API
like NAPI configuration. Any state that can should just use the
instance lock directly, not the "compat" hacks.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250408195956.412733-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Read accesses go via xsk_get_pool_from_qid(), the call coming
from the core and gve look safe (other "ops locked" drivers
don't support XSK).
Write accesses go via xsk_reg_pool_at_qid() and xsk_clear_pool_at_qid().
Former is already under the ops lock, latter is not (both coming from
the workqueue via xp_clear_dev() and NETDEV_UNREGISTER via xsk_notifier()).
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250408195956.412733-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
netdev_get_by_index_lock() performs following steps:
rcu_lock();
dev = lookup(netns, ifindex);
dev_get(dev);
rcu_unlock();
[... lock & validate the dev ...]
return dev
Validation right now only checks if the device is registered but since
the lookup is netns-aware we must also protect against the device
switching netns right after we dropped the RCU lock. Otherwise
the caller in netns1 may get a pointer to a device which has just
switched to netns2.
We can't hold the lock for the entire netns change process (because of
the NETDEV_UNREGISTER notifier), and there's no existing marking to
indicate that the netns is unlisted because of netns move, so add one.
AFAIU none of the existing netdev_get_by_index_lock() callers can
suffer from this problem (NAPI code double checks the netns membership
and other callers are either under rtnl_lock or not ns-sensitive),
so this patch does not have to be treated as a fix.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250408195956.412733-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All users of the deprecated function pcim_iounmap_regions() have been
ported by now. Remove it.
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Zijun Hu <quic_zijuhu@quicinc.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250327110707.20025-4-phasta@kernel.org
|
|
Since cpufreq_update_limits() obtains a cpufreq policy pointer for the
given CPU and reference counts the corresponding policy object, it may
as well pass the policy pointer to the cpufreq driver's ->update_limits()
callback which allows that callback to avoid invoking cpufreq_cpu_get()
for the same CPU.
Accordingly, redefine ->update_limits() to take a policy pointer instead
of a CPU number and update both drivers implementing it, intel_pstate
and amd-pstate, as needed.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://patch.msgid.link/8560367.NyiUUSuA9g@rjwysocki.net
|
|
Since cpufreq_cpu_acquire() and cpufreq_cpu_release() have no more
users in the tree, remove them.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://patch.msgid.link/3880470.kQq0lBPeGt@rjwysocki.net
|
|
Introduce "read" and "write" locking guards for cpufreq policies and use
them where applicable in the cpufreq core.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://patch.msgid.link/8518682.T7Z3S40VBb@rjwysocki.net
|
|
The "function" field of struct hrtimer has been changed to private, but
two instances have not been converted to use ACCESS_PRIVATE().
Convert them to use ACCESS_PRIVATE().
Fixes: 04257da0c99c ("hrtimers: Make callback function pointer private")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250408103854.1851093-1-namcao@linutronix.de
Closes: https://lore.kernel.org/oe-kbuild-all/202504071931.vOVl13tt-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202504072155.5UAZjYGU-lkp@intel.com/
|
|
Now that all abuse is gone and the legit users are converted to
guard(msi_descs_lock), rename the lock functions and document them as
internal.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huwei.com>
Link: https://lore.kernel.org/all/20250319105506.864699741@linutronix.de
|
|
Provide a lock guard for MSI descriptor locking and update the core code
accordingly.
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/all/20250319105506.144672678@linutronix.de
|
|
In cases where an allocation is consumed by another function, the
allocation needs to be retained on success or freed on failure. The code
pattern is usually:
struct foo *f = kzalloc(sizeof(*f), GFP_KERNEL);
struct bar *b;
,,,
// Initialize f
...
if (ret)
goto free;
...
bar = bar_create(f);
if (!bar) {
ret = -ENOMEM;
goto free;
}
...
return 0;
free:
kfree(f);
return ret;
This prevents using __free(kfree) on @f because there is no canonical way
to tell the cleanup code that the allocation should not be freed.
Abusing no_free_ptr() by force ignoring the return value is not really a
sensible option either.
Provide an explicit macro retain_and_null_ptr(), which NULLs the cleanup
pointer. That makes it easy to analyze and reason about.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Link: https://lore.kernel.org/all/20250319105506.083538907@linutronix.de
|
|
Add rxe_odp_do_atomic_write() so that ODP specific steps are applied to
ATOMIC WRITE requests.
Signed-off-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Link: https://patch.msgid.link/20250324075649.3313968-3-matsuda-daisuke@fujitsu.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
acpi_register_lps0_dev() and acpi_unregister_lps0_dev() may be used
in drivers that don't require CONFIG_SUSPEND or compile on !X86.
Add prototypes for those cases.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202502191627.fRgoBwcZ-lkp@intel.com/
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20250407183656.1503446-1-superm1@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Move stack_tracer_enabled into trace_stack_sysctl_table. This is part of
a greater effort to move ctl tables into their respective subsystems
which will reduce the merge conflicts in kernel/sysctl.c.
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
Move trace ctl tables into their own const array in
kernel/trace/trace.c. The sysctl table register is called with
subsys_initcall placing if after its original place in proc_root_init.
This is part of a greater effort to move ctl tables into their
respective subsystems which will reduce the merge conflicts in
kernel/sysctl.c.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Immutable tag for the regulator tree to pull from
gpio: provide gpiod_is_equal()
|
|
There are users in the kernel that directly compare raw GPIO descriptor
pointers in order to determine whether they refer to the same physical
GPIO pin. This accidentally works like this but is not guaranteed by any
API contract. Let's provide a comparator function that hides the actual
logic.
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250407-gpiod-is-equal-v1-1-7d85f568ae6e@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Add support for hardware-wrapped keys to fscrypt. Such keys are
protected from certain attacks, such as cold boot attacks. For more
information, see the "Hardware-wrapped keys" section of
Documentation/block/inline-encryption.rst.
To support hardware-wrapped keys in fscrypt, we allow the fscrypt master
keys to be hardware-wrapped. File contents encryption is done by
passing the wrapped key to the inline encryption hardware via
blk-crypto. Other fscrypt operations such as filenames encryption
continue to be done by the kernel, using the "software secret" which the
hardware derives. For more information, see the documentation which
this patch adds to Documentation/filesystems/fscrypt.rst.
Note that this feature doesn't require any filesystem-specific changes.
However it does depend on inline encryption support, and thus currently
it is only applicable to ext4 and f2fs.
The version of this feature introduced by this patch is mostly
equivalent to the version that has existed downstream in the Android
Common Kernels since 2020. However, a couple fixes are included.
First, the flags field in struct fscrypt_add_key_arg is now placed in
the proper location. Second, key identifiers for HW-wrapped keys are
now derived using a distinct HKDF context byte; this fixes a bug where a
raw key could have the same identifier as a HW-wrapped key. Note that
as a result of these fixes, the version of this feature introduced by
this patch is not UAPI or on-disk format compatible with the version in
the Android Common Kernels, though the divergence is limited to just
those specific fixes. This version should be used going forwards.
This patch has been heavily rewritten from the original version by
Gaurav Kashyap <quic_gaurkash@quicinc.com> and
Barani Muthukumaran <bmuthuku@codeaurora.org>.
Tested-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> # sm8650
Link: https://lore.kernel.org/r/20250404225859.172344-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Pull in remaining fixes from 6.15/scsi-queue.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
__skb_try_recv_from_queue() deals with a queue, @sk is not used
since commit e427cad6eee4 ("net: datagram: drop 'destructor'
argument from several helpers"). Remove sk from function parameters,
adapt callers.
No functional change intended.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250407-cleanup-drop-param-sk-v1-1-cd076979afac@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It's quite common to have a single UDP tunnel type active in the
whole system. In such a case we can replace the indirect call for
the UDP tunnel GRO callback with a static call.
Add the related accounting in the control path and switch to static
call when possible. To keep the code simple use a static array for
the registered tunnel types, and size such array based on the kernel
config.
Note that there are valid kernel configurations leading to
UDP_MAX_TUNNEL_TYPES == 0 even with IS_ENABLED(CONFIG_NET_UDP_TUNNEL),
Explicitly skip the accounting in such a case, to avoid compile warning
when accessing "udp_tunnel_gro_types".
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/53d156cdfddcc9678449e873cc83e68fa1582653.1744040675.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Most UDP tunnels bind a socket to a local port, with ANY address, no
peer and no interface index specified.
Additionally it's quite common to have a single tunnel device per
namespace.
Track in each namespace the UDP tunnel socket respecting the above.
When only a single one is present, store a reference in the netns.
When such reference is not NULL, UDP tunnel GRO lookup just need to
match the incoming packet destination port vs the socket local port.
The tunnel socket never sets the reuse[port] flag[s]. When bound to no
address and interface, no other socket can exist in the same netns
matching the specified local port.
Matching packets with non-local destination addresses will be
aggregated, and eventually segmented as needed - no behavior changes
intended.
Restrict the optimization to kernel sockets only: it covers all the
relevant use-cases, and user-space owned sockets could be disconnected
and rebound after setup_udp_tunnel_sock(), breaking the uniqueness
assumption
Note that the UDP tunnel socket reference is stored into struct
netns_ipv4 for both IPv4 and IPv6 tunnels. That is intentional to keep
all the fastpath-related netns fields in the same struct and allow
cacheline-based optimization. Currently both the IPv4 and IPv6 socket
pointer share the same cacheline as the `udp_table` field.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/41d16bc8d1257d567f9344c445b4ae0b4a91ede4.1744040675.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull kunit fixes from Shuah Khan:
- Fix the tool to report test count in case of a late test plan when
tests are specified before the test plan
- Fix spelling error
* tag 'linux_kselftest-kunit-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: Spelling s/slowm/slow/
kunit: tool: fix count of tests if late test plan
|
|
This adds the UAPI for the Asahi driver targeting the GPU in the Apple
M1 and M2 series systems on chip. The UAPI design is based on other
modern Vulkan-capable drivers, including Xe and Panthor. Memory
management is based on explicit VM management. Synchronization is
exclusively explicit sync.
This UAPI is validated against our open source Mesa stack, which is
fully conformant to the OpenGL 4.6, OpenGL ES 3.2, OpenCL 3.0, and
Vulkan 1.4 standards. The Vulkan driver supports sparse, exercising the
VM_BIND mechanism.
This patch adds the standalone UAPI header. It is implemented by an open
source DRM driver written in Rust. We fully intend to upstream this
driver when possible. However, as a production graphics driver, it
depends on a significant number of Rust abstractions that will take a
long time to upstream. In the mean time, our userspace is upstream in
Mesa but is not allowed to probe with upstream Mesa as the UAPI is not
yet reviewed and merged in the upstream kernel. Although we ship a
patched Mesa in Fedora Asahi Remix, any containers shipping upstream
Mesa builds are broken for our users, including upstream Flatpak and
Waydroid runtimes. Additionally, it forces us to maintain forks of Mesa
and virglrenderer, which complicates bisects.
The intention in sending out this patch is for this UAPI to be
thoroughly reviewed. Once we as the DRM community are satisfied with the
UAPI, this header lands signifying that the UAPI is stable and must only
be evolved in backwards-compatible ways; it will be the UAPI implemented
in the DRM driver that eventually lands upstream. That promise lets us
enable upstream Mesa, solving all these issues while the upstream Rust
abstractions are developed.
https://github.com/alyssarosenzweig/linux/commits/agx-uapi-v7 contains
the DRM driver implementing this proposed UAPI.
https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33984 contains
the Mesa patches to implement this proposed UAPI.
That Linux and Mesa branch together give a complete graphics/compute
stack on top of this UAPI.
Co-developed-by: Asahi Lina <lina@asahilina.net>
Signed-off-by: Asahi Lina <lina@asahilina.net>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Janne Grunau <j@jannau.net>
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Link: https://lore.kernel.org/r/20250408-agx-uapi-v7-1-ad122d4f7324@rosenzweig.io
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
|
|
Fix a misspelling of "slow".
Link: https://lore.kernel.org/r/1f7ebf98598418914ec9f5b6d5cb8583d24a4bf0.1743089563.git.geert@linux-m68k.org
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <shuah@kernel.org>
|
|
Add an INFO query to check if user queues are supported.
v2: switch to a mask of IPs (Marek)
v3: move to drm_amdgpu_info_device (Marek)
Cc: marek.olsak@amd.com
Cc: prike.liang@amd.com
Cc: sunil.khatri@amd.com
Cc: yogesh.mohanmarimuthu@amd.com
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch adds a new subquery (AMDGPU_INFO_UQ_FW_AREAS) in
AMDGPU_INFO_IOCTL to get the size and alignment of shadow
and csa objects from the FW setup. This information is
required for the userqueue consumers.
V2: Added Alex's suggestions and addressed review comments:
- make this query IP specific (GFX/SDMA etc)
- give a better title (AMDGPU_INFO_UQ_METADATA)
- restructured the code as per sample code shared by Alex
V3: Split the UAPI patch from shadow_size_fn modifications
V4: Addressed review comments from UAPI review (Marek/Pierre-Eric)
- Change the query name to AMDGPU_INFO_UQ_FW_AREAS
- remove unused inpur parameter for AMDGPU_HW_IP*
UAPI link: https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/400/
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Arvind Yadav <arvind.yadav@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Modify kernel UAPI userq signal/wait struct field names and
description corresponding to the libdrm UAPI review comments.
libdrm MR: https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/392
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch fixes some of the pending UAPI review comments
from the libDRM/UAPI review process.
- It updates some outdated comments in the userqueue UAPI header
highlighted during the libdrm UAPI review.
- It removes the GDS BO support which was found unused.
- It also removes the unused flags parameter from the UAPI.
- It also adds a padding variables in userqueue in/out structures.
(Pierre-Eric and Marek)
- clarify comments on top of drm_amdgpu_userq_in
- clarify comment for queue_id (in)
- clarify comment for mqd
- clarify comment for compute MQD size
- clarify comment for queue_id (out)
- remove GDB object from BO object list
- remove the unused flags parameter
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
Richard Fitzgerald
Kaustabh Chakraborty
Rafael J. Wysocki
Ingo Molnar
Thomas Zimmermann
Andy Shevchenko
Peng Jiang
Jocelyn Falempe
Paul Chaignon
Kuniyuki Iwashima
Eric Dumazet
Jakub Kicinski
Philipp Stanner
Nam Cao
Thomas Gleixner
Daisuke Matsuda
Mario Limonciello
Joel Granados
Bartosz Golaszewski
Eric Biggers
Martin K. Petersen
Michal Luczaj
Paolo Abeni
Linus Torvalds
Alyssa Rosenzweig
Geert Uytterhoeven
Alex Deucher
Shashank Sharma
Arunpravin Paneer Selvam