| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The verifier currently does not permit global subprog calls when a lock
is held, preemption is disabled, or when IRQs are disabled. This is
because we don't know whether the global subprog calls sleepable
functions or not.
In case of locks, there's an additional reason: functions called by the
global subprog may hold additional locks etc. The verifier won't know
while verifying the global subprog whether it was called in context
where a spin lock is already held by the program.
Perform summarization of the sleepable nature of a global subprog just
like changes_pkt_data and then allow calls to global subprogs for
non-sleepable ones from atomic context.
While making this change, I noticed that RCU read sections had no
protection against sleepable global subprog calls, include it in the
checks and fix this while we're at it.
Care needs to be taken to not allow global subprog calls when regular
bpf_spin_lock is held. When resilient spin locks is held, we want to
potentially have this check relaxed, but not for now.
Also make sure extensions freplacing global functions cannot do so
in case the target is non-sleepable, but the extension is. The other
combination is ok.
Tests are included in the next patch to handle all special conditions.
Fixes: 9bb00b2895cb ("bpf: Add kfunc bpf_rcu_read_lock/unlock()")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250301151846.1552362-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Currently for bpf progs in a cgroup hierarchy, the effective prog array
is computed from bottom cgroup to upper cgroups (post-ordering). For
example, the following cgroup hierarchy
root cgroup: p1, p2
subcgroup: p3, p4
have BPF_F_ALLOW_MULTI for both cgroup levels.
The effective cgroup array ordering looks like
p3 p4 p1 p2
and at run time, progs will execute based on that order.
But in some cases, it is desirable to have root prog executes earlier than
children progs (pre-ordering). For example,
- prog p1 intends to collect original pkt dest addresses.
- prog p3 will modify original pkt dest addresses to a proxy address for
security reason.
The end result is that prog p1 gets proxy address which is not what it
wants. Putting p1 to every child cgroup is not desirable either as it
will duplicate itself in many child cgroups. And this is exactly a use case
we are encountering in Meta.
To fix this issue, let us introduce a flag BPF_F_PREORDER. If the flag
is specified at attachment time, the prog has higher priority and the
ordering with that flag will be from top to bottom (pre-ordering).
For example, in the above example,
root cgroup: p1, p2
subcgroup: p3, p4
Let us say p2 and p4 are marked with BPF_F_PREORDER. The final
effective array ordering will be
p2 p4 p3 p1
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250224230116.283071-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Pull fsnotify reverts from Jan Kara:
"Syzbot has found out that fsnotify HSM events generated on page fault
can be generated while we already hold freeze protection for the
filesystem (when you do buffered write from a buffer which is mmapped
file on the same filesystem) which violates expectations for HSM
events and could lead to deadlocks of HSM clients with filesystem
freezing.
Since it's quite late in the cycle we've decided to revert changes
implementing HSM events on page fault for now and instead just
generate one event for the whole range on mmap(2) so that HSM client
can fetch the data at that moment"
* tag 'fsnotify_for_v6.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
Revert "fanotify: disable readahead if we have pre-content watches"
Revert "mm: don't allow huge faults for files with pre content watches"
Revert "fsnotify: generate pre-content permission event on page fault"
Revert "xfs: add pre-content fsnotify hook for DAX faults"
Revert "ext4: add pre-content fsnotify hook for DAX faults"
fsnotify: add pre-content hooks on mmap()
|
|
The function gfpflags_allow_spinning() has a bug that makes it return
the opposite result than intended. This could contribute to deadlocks as
usage profilerates, for now it was noticed as a performance regression
due to try_charge_memcg() not refilling memcg stock when it could. Fix
the flipped condition.
Fixes: 97769a53f117 ("mm, bpf: Introduce try_alloc_pages() for opportunistic page allocation")
Reported-by: kernel test robot <oliver.sang@intel.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250310124017.187-1-alexei.starovoitov@gmail.com
Closes: https://lore.kernel.org/oe-lkp/202503101254.cfd454df-lkp@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This adds request chaining and virtual address support to the
acomp interface.
It is identical to the ahash interface, except that a new flag
CRYPTO_ACOMP_REQ_NONDMA has been added to indicate that the
virtual addresses are not suitable for DMA. This is because
all existing and potential acomp users can provide memory that
is suitable for DMA so there is no need for a fall-back copy
path.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Rather than allocating the stream memory in the request object,
move it into a per-cpu buffer managed by scomp. This takes the
stress off the user from having to manage large request objects
and setting up their own per-cpu buffers in order to do so.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The tfm argument is completely unused and meaningless as the
same stream object is identical over all transforms of a given
algorithm. Remove it.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Mark the src.virt.addr field in struct skcipher_walk as a pointer
to const data. This guarantees that the user won't modify the data
which should be done through dst.virt.addr to ensure that flushing
is done when necessary.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Reuse the addr field from struct scatter_walk for skcipher_walk.
Keep the existing virt.addr fields but make them const for the
user to access the mapped address.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add memcpy_sglist which copies one SG list to another.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Rather than returning the address and storing the length into an
argument pointer, add an address field to the walk struct and use
that to store the address. The length is returned directly.
Change the done functions to use this stored address instead of
getting them from the caller.
Split the address into two using a union. The user should only
access the const version so that it is never changed.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Additions to the error enum after explicit 0x27 setting for
SEV_RET_INVALID_KEY leads to incorrect value assignments.
Use explicit values to match the manufacturer specifications more
clearly.
Fixes: 3a45dc2b419e ("crypto: ccp: Define the SEV-SNP commands")
CC: stable@vger.kernel.org
Signed-off-by: Dionna Glaze <dionnaglaze@google.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
async_xor_val has been unused since commit
a7c224a820c3 ("md/raid5: convert to new xor compution interface")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add support for Extended Linear Cache for CXL. Add enumeration support
of the cache. Add MCE notification of the aliased memory address.
|
|
There's only a single user of of_prop_val_eq(), so move it to overlay.c.
This removes one case of exposing struct property outside of the DT
code.
Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250312212947.1067337-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Concurrent pci error and hotplug handling fix (Keith)
- Endpoint function fixes (Damien)
- Fix for a regression introduced in this cycle with error checking for
batched request completions (Shin'ichiro)
* tag 'block-6.14-20250313' of git://git.kernel.dk/linux:
block: change blk_mq_add_to_batch() third argument type to bool
nvme: move error logging from nvme_end_req() to __nvme_end_req()
nvmet: pci-epf: Do not add an IRQ vector if not needed
nvmet: pci-epf: Set NVMET_PCI_EPF_Q_LIVE when a queue is fully created
nvme-pci: fix stuck reset on concurrent DPC and HP
|
|
When PCIe AER is in FW-First, OS should process CXL Protocol errors from
CPER records. Introduce support for handling and logging CXL Protocol
errors.
The defined trace events cxl_aer_uncorrectable_error and
cxl_aer_correctable_error trace native CXL AER endpoint errors. Reuse them
to trace FW-First Protocol errors.
Since the CXL code is required to be called from process context and
GHES is in interrupt context, use workqueues for processing.
Similar to CXL CPER event handling, use kfifo to handle errors as it
simplifies queue processing by providing lock free fifo operations.
Add the ability for the CXL sub-system to register a workqueue to
process CXL CPER protocol errors.
[DJ: return cxl_cper_register_prot_err_work() directly in cxl_ras_init()]
Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Reviewed-by: Li Ming <ming.li@zohomail.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://patch.msgid.link/20250310223839.31342-2-Smita.KoralahalliChannabasappa@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Pull sound fixes from Takashi Iwai:
"A collection of last-minute fixes.
Most of them are for ASoC, and the only one core fix is for reverting
the previous change, while the rest are all device-specific quirks and
fixes, which should be relatively safe to apply"
* tag 'sound-6.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: cs42l43: convert to SYSTEM_SLEEP_PM_OPS
ALSA: hda/realtek: Add mute LED quirk for HP Pavilion x360 14-dy1xxx
ASoC: codecs: wm0010: Fix error handling path in wm0010_spi_probe()
ASoC: rt722-sdca: add missing readable registers
ASoC: amd: yc: Support mic on another Lenovo ThinkPad E16 Gen 2 model
ASoC: cs42l43: Fix maximum ADC Volume
ASoC: ops: Consistently treat platform_max as control value
ASoC: rt1320: set wake_capable = 0 explicitly
ASoC: cs42l43: Add jack delay debounce after suspend
ASoC: tegra: Fix ADX S24_LE audio format
ASoC: codecs: wsa884x: report temps to hwmon in millidegree of Celsius
ASoC: Intel: sof_sdw: Fix unlikely uninitialized variable use in create_sdw_dailinks()
|
|
disable_irq_lockdep() has no users, last one was probabaly removed in
0b7c874348ea1 ("forcedeth: fix unilateral interrupt disabling in netpoll path")
Remove disable_irq_lockdep().
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250212103619.2560503-3-bigeasy@linutronix.de
|
|
disable_irq_nosync_lockdep() disables interrupts with lockdep enabled to
avoid false positive reports by lockdep that a certain lock has not been
acquired with disabled interrupts. The user of this macros expects that
a lock can be acquried without disabling interrupts because the IRQ line
triggering the interrupt is disabled.
This triggers a warning on PREEMPT_RT because after
disable_irq_nosync_lockdep.*() the following spinlock_t now is acquired
with disabled interrupts.
On PREEMPT_RT there is no difference between spin_lock() and
spin_lock_irq() so avoiding disabling interrupts in this case works for
the two remaining callers as of today.
Don't disable interrupts on PREEMPT_RT in disable_irq_nosync_lockdep.*().
Closes: https://lore.kernel.org/760e34f9-6034-40e0-82a5-ee9becd24438@roeck-us.net
Fixes: e8106b941ceab ("[PATCH] lockdep: core, add enable/disable_irq_irqsave/irqrestore() APIs")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Suggested-by: "Steven Rostedt (Google)" <rostedt@goodmis.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250212103619.2560503-2-bigeasy@linutronix.de
|
|
Pull core fix from Ingo Molnar:
"Fix a Sparse false positive warning triggered by no_free_ptr()"
* tag 'core-urgent-2025-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
<linux/cleanup.h>: Allow the passing of both iomem and non-iomem pointers to no_free_ptr()
|
|
Mainline Linux uses different clock IDs from both downstream and
mainline TF-A, which both got them from downstream Linux. If we want to
control clocks through SCMI, we'll need to know about these IDs.
Add the relevant ones prefixed with SCMI_ to the header.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Acked-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250310-rk3576-scmi-clocks-v1-1-e165deb034e8@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Convert TDG.VP.VMCALL<ReportFatalError> to KVM_EXIT_SYSTEM_EVENT with
a new type KVM_SYSTEM_EVENT_TDX_FATAL and forward it to userspace for
handling.
TD guest can use TDG.VP.VMCALL<ReportFatalError> to report the fatal
error it has experienced. This hypercall is special because TD guest
is requesting a termination with the error information, KVM needs to
forward the hypercall to userspace anyway, KVM doesn't do parsing or
conversion, it just dumps the 16 general-purpose registers to userspace
and let userspace decide what to do.
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Message-ID: <20250222014225.897298-8-binbin.wu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Move pv_unhalted check out of kvm_vcpu_has_events(), check pv_unhalted
explicitly when handling PV unhalt and expose kvm_vcpu_has_events().
kvm_vcpu_has_events() returns true if pv_unhalted is set, and pv_unhalted
is only cleared on transitions to KVM_MP_STATE_RUNNABLE. If the guest
initiates a spurious wakeup, pv_unhalted could be left set in perpetuity.
Currently, this is not problematic because kvm_vcpu_has_events() is only
called when handling PV unhalt. However, if kvm_vcpu_has_events() is used
for other purposes in the future, it could return the unexpected results.
Export kvm_vcpu_has_events() for its usage in broader contexts.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Message-ID: <20250222014225.897298-3-binbin.wu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add a parameter "kvm" to kvm_cpu_dirty_log_size() and down to its callers:
kvm_dirty_ring_get_rsvd_entries(), kvm_dirty_ring_alloc().
This is a preparation to make cpu_dirty_log_size a per-VM value rather than
a system-wide value.
No function changes expected.
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
TDX host key IDs (HKID) are limit resources in a machine, and the misc
cgroup lets the machine owner track their usage and limits the possibility
of abusing them outside the owner's control.
The cgroup v2 miscellaneous subsystem was introduced to control the
resource of AMD SEV & SEV-ES ASIDs. Likewise introduce HKIDs as a misc
resource.
Signed-off-by: Zhiming Hu <zhiming.hu@intel.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Before KVM can use TDX to create and run TDX guests, TDX needs to be
initialized from two perspectives: 1) TDX module must be initialized
properly to a working state; 2) A per-cpu TDX initialization, a.k.a the
TDH.SYS.LP.INIT SEAMCALL must be done on any logical cpu before it can
run any other TDX SEAMCALLs.
The TDX host core-kernel provides two functions to do the above two
respectively: tdx_enable() and tdx_cpu_enable().
There are two options in terms of when to initialize TDX: initialize TDX
at KVM module loading time, or when creating the first TDX guest.
Choose to initialize TDX during KVM module loading time:
Initializing TDX module is both memory and CPU time consuming: 1) the
kernel needs to allocate a non-trivial size(~1/256) of system memory
as metadata used by TDX module to track each TDX-usable memory page's
status; 2) the TDX module needs to initialize this metadata, one entry
for each TDX-usable memory page.
Also, the kernel uses alloc_contig_pages() to allocate those metadata
chunks, because they are large and need to be physically contiguous.
alloc_contig_pages() can fail. If initializing TDX when creating the
first TDX guest, then there's chance that KVM won't be able to run any
TDX guests albeit KVM _declares_ to be able to support TDX.
This isn't good for the user.
On the other hand, initializing TDX at KVM module loading time can make
sure KVM is providing a consistent view of whether KVM can support TDX
to the user.
Always only try to initialize TDX after VMX has been initialized. TDX
is based on VMX, and if VMX fails to initialize then TDX is likely to be
broken anyway. Also, in practice, supporting TDX will require part of
VMX and common x86 infrastructure in working order, so TDX cannot be
enabled alone w/o VMX support.
There are two cases that can result in failure to initialize TDX: 1) TDX
cannot be supported (e.g., because of TDX is not supported or enabled by
hardware, or module is not loaded, or missing some dependency in KVM's
configuration); 2) Any unexpected error during TDX bring-up. For the
first case only mark TDX is disabled but still allow KVM module to be
loaded. For the second case just fail to load the KVM module so that
the user can be aware.
Because TDX costs additional memory, don't enable TDX by default. Add a
new module parameter 'enable_tdx' to allow the user to opt-in.
Note, the name tdx_init() has already been taken by the early boot code.
Use tdx_bringup() for initializing TDX (and tdx_cleanup() since KVM
doesn't actually teardown TDX). They don't match vt_init()/vt_exit(),
vmx_init()/vmx_exit() etc but it's not end of the world.
Also, once initialized, the TDX module cannot be disabled and enabled
again w/o the TDX module runtime update, which isn't supported by the
kernel. After TDX is enabled, nothing needs to be done when KVM
disables hardware virtualization, e.g., when offlining CPU, or during
suspend/resume. TDX host core-kernel code internally tracks TDX status
and can handle "multiple enabling" scenario.
Similar to KVM_AMD_SEV, add a new KVM_INTEL_TDX Kconfig to guide KVM TDX
code. Make it depend on INTEL_TDX_HOST but not replace INTEL_TDX_HOST
because in the longer term there's a use case that requires making
SEAMCALLs w/o KVM as mentioned by Dan [1].
Link: https://lore.kernel.org/6723fc2070a96_60c3294dc@dwillia2-mobl3.amr.corp.intel.com.notmuch/ [1]
Signed-off-by: Kai Huang <kai.huang@intel.com>
Message-ID: <162f9dee05c729203b9ad6688db1ca2960b4b502.1731664295.git.kai.huang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
To support TDX, KVM will need to enable TDX during KVM module loading
time. Enabling TDX requires enabling hardware virtualization first so
that all online CPUs (and the new CPU going online) are in post-VMXON
state.
KVM by default enables hardware virtualization but that is done in
kvm_init(), which must be the last step after all initialization is done
thus is too late for enabling TDX.
Export functions to enable/disable hardware virtualization so that TDX
code can use them to handle hardware virtualization enabling before
kvm_init().
Signed-off-by: Kai Huang <kai.huang@intel.com>
Message-ID: <dfe17314c0d9978b7bc3b0833dff6f167fbd28f5.1731664295.git.kai.huang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Samsung DTS ARM64 changes for v6.15
1. Google GS101:
- Disable GSA core pinctrl because its registers are not available for
normal world.
- Add APM (Active Power Management) mailbox and the ACPM firmware nodes.
- Add new boards: Google Pixel 6 Pro (Raven).
- Enable framebuffer and reboot-mode.
2. Exynos990:
- Add PERIS clock controller, MCT timer
3. Exynos8895:
- Define all remaining serial engine (USI) and syscon nodes, add MMC.
- Enable microSD and touchsreen on Samsung Galaxy S8 (dreamlte).
4. ExynosAutov920: Add UFS and CPU cache information.
5. Various cleanups.
This includes two topic branches with DT bindings, which might be shared
with other trees depending on needs:
1. for-v6.15/samsung-clk-dt-bindings with Exynos990 clock controller
header constants.
2. for-v6.15/samsung-soc-dt-bindings with Exynos USI serial engines
header constants rework.
* tag 'samsung-dt64-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (25 commits)
arm64: dts: tesla: Change labels to lower-case
arm64: dts: exynos: gs101: Change labels to lower-case
arm64: dts: exynosautov920: add ufs phy for ExynosAutov920 SoC
arm64: dts: exynosautov920: add CPU cache information
arm64: dts: exynos: gs101: add ACPM protocol node
arm64: dts: exynos: gs101: add AP to APM mailbox node
arm64: dts: exynos: gs101: add SRAM node
arm64: dts: exynos: gs101: add reboot-mode support (SYSIP_DAT0)
arm64: dts: exynos: gs101: align poweroff writes with downstream
arm64: dts: exynos: gs101: drop explicit regmap from reboot nodes
arm64: dts: exynos8895: Rename PMU nodes to fixup sorting
arm64: dts: exynos8895-dreamlte: enable support for the touchscreen
arm64: dts: exynos8895-dreamlte: enable support for microSD storage
arm64: dts: exynos8895: add a node for mmc
arm64: dts: exynos8895: define all usi nodes
arm64: dts: exynos8895: add syscon nodes for peric0/1 and fsys0/1
arm64: dts: exynos990: Rename and sort PMU nodes
arm64: dts: exynos990: Add CMU_PERIS and MCT nodes
dt-bindings: soc: samsung: usi: add USIv1 and samsung,exynos8895-usi
dt-bindings: clock: exynos990: Add CMU_PERIS block
...
Link: https://lore.kernel.org/r/20250309185601.10616-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
New boards: MNT-Reform2 laptop (rk3588), OrangePi5-Ultra (rk3588),
Radxa Rock 4D (rk3576), Firefly ROC-RK3576-PC, Photonicat (rk3568)
New overlays: Video-adapters for Theobroma boards and one adapter used
in hw test scenarios.
Interesting bigger changes contain clock support for rk3528; support for
the hdmi1 controller as well as hdmi-audio support on both controllers on
rk3588; the hdmi-receiver of the rk3588 landed, and rk3576 got basic
graphics support and can now do hdmi output.
Another big block is that we're now doing overlays way better and are
including build-testing for applied overlays to the base dtb - similar
to how other arches already do this.
Of cours a big list of more controllers for rk3576 (nvmem, sfc), rk3588
(rng, spdif, regulator for gpu power-domain) and rk3528 (saradc, pinctrl)
And a huge number of board-level improvements and additions.
* tag 'v6.15-rockchip-dts64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (89 commits)
arm64: dts: rockchip: Add SPI NOR device on the ROCK 4D
arm64: dts: rockchip: Add SFC nodes for rk3576
arm64: dts: rockchip: Add maskrom button to Radxa E20C
arm64: dts: rockchip: Add SARADC node for RK3528
arm64: dts: rockchip: Add user button to Radxa E20C
arm64: dts: rockchip: Add leds node to Radxa E20C
arm64: dts: rockchip: Add HDMI support for rock-4d
arm64: dts: rockchip: enable SCMI clk for RK3528 SoC
arm64: dts: rockchip: Enable HDMI receiver on rock-5b
arm64: dts: rockchip: Add device tree support for HDMI RX Controller
arm64: dts: rockchip: Add rk3528 QoS register node
dt-bindings: mfd: syscon: Add rk3528 QoS register compatible
arm64: dts: rockchip: add MNT Reform 2 laptop
dt-bindings: arm: rockchip: Add MNT Reform 2 (RCORE)
dt-bindings: soc: rockchip: Add RK3528 VPU GRF syscon
dt-bindings: soc: rockchip: Add RK3528 VO GRF syscon
arm64: dts: rockchip: Enable hdmi out display for rk3576-evb-v10
arm64: dts: rockchip: Enable hdmi display on sige5
arm64: dts: rockchip: Add hdmi for rk3576
arm64: dts: rockchip: Add vop for rk3576
...
Link: https://lore.kernel.org/r/13791512.uLZWGnKmhe@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Currently if architectures want to support HOTPLUG_SMT they need to
provide a topology_is_primary_thread() telling the framework which
thread in the SMT cannot offline. However arm64 doesn't have a
restriction on which thread in the SMT cannot offline, a simplest
choice is that just make 1st thread as the "primary" thread. So
just make this as the default implementation in the framework and
let architectures like x86 that have special primary thread to
override this function (which they've already done).
There's no need to provide a stub function if !CONFIG_SMP or
!CONFIG_HOTPLUG_SMT. In such case the testing CPU is already
the 1st CPU in the SMT so it's always the primary thread.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20250311075143.61078-2-yangyicong@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
These IRQ_TYPE_* defines are used by both drivers/misc/pci_endpoint_test.c
and tools/testing/selftests/pci_endpoint/pci_endpoint_test.c.
Considering that both the misc driver and the selftest already includes
the pcitest.h UAPI header, it makes sense for these IRQ_TYPE_* defines
to be located in the pcitest.h UAPI header.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Link: https://lore.kernel.org/r/20250310111016.859445-10-cassel@kernel.org
|
|
Apple GPUs support non-linear "GPU-tiled" image layouts. Add modifiers
for these layouts. Mesa requires these modifiers to share non-linear
buffers across processes, but no other userspace or kernel support is
required/expected.
These layouts are notably not used for interchange across hardware
blocks (e.g. with the display controller). There are other layouts for
that but we don't support them either in userspace or kernelspace yet
(even downstream), so we don't add modifiers here.
Acked-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Link: https://patchwork.freedesktop.org/patch/msgid/20250310-apple-twiddled-modifiers-v4-1-1ccac9544808@rosenzweig.io
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
|
|
Remove the remaining parts of the 50633, the core, headers and glue.
The pcf50633 was used as part of the OpenMoko devices but
the support for its main chip was recently removed in:
commit 61b7f8920b17 ("ARM: s3c: remove all s3c24xx support")
See https://lore.kernel.org/all/Z8z236h4B5A6Ki3D@gallifrey/
Remove it.
Signed-off-by: "Dr. David Alan Gilbert" <linux@treblig.org>
Link: https://lore.kernel.org/r/20250311014959.743322-10-linux@treblig.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The pcf50633 was used as part of the OpenMoko devices but
the support for its main chip was recently removed in:
commit 61b7f8920b17 ("ARM: s3c: remove all s3c24xx support")
See https://lore.kernel.org/all/Z8z236h4B5A6Ki3D@gallifrey/
Remove it.
Signed-off-by: "Dr. David Alan Gilbert" <linux@treblig.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250311014959.743322-4-linux@treblig.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The pcf50633 was used as part of the OpenMoko devices but
the support for its main chip was recently removed in:
commit 61b7f8920b17 ("ARM: s3c: remove all s3c24xx support")
See https://lore.kernel.org/all/Z8z236h4B5A6Ki3D@gallifrey/
Remove it.
Signed-off-by: "Dr. David Alan Gilbert" <linux@treblig.org>
Link: https://lore.kernel.org/r/20250311014959.743322-2-linux@treblig.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The pcf50633 was used as part of the OpenMoko devices but
the support for its main chip was recently removed in:
commit 61b7f8920b17 ("ARM: s3c: remove all s3c24xx support")
See https://lore.kernel.org/all/Z8z236h4B5A6Ki3D@gallifrey/
Remove it.
Signed-off-by: "Dr. David Alan Gilbert" <linux@treblig.org>
Link: https://lore.kernel.org/r/20250311014959.743322-8-linux@treblig.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
When a character array without a terminating NUL character has a static
initializer, GCC 15's -Wunterminated-string-initialization will only
warn if the array lacks the "nonstring" attribute[1]. Mark the arrays
with __nonstring to and correctly identify the char array as "not a C
string" and thereby eliminate the warning.
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=117178 [1]
Cc: Juergen Gross <jgross@suse.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: xen-devel@lists.xenproject.org
Signed-off-by: Kees Cook <kees@kernel.org>
Acked-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250310222234.work.473-kees@kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
pcap_adc_sync() was added in 2009 by commit 13a09f93d2bf ("mfd: add PCAP
driver") but has remained unused; the async version is still used.
Remove it.
Signed-off-by: "Dr. David Alan Gilbert" <linux@treblig.org>
Link: https://lore.kernel.org/r/20250306011027.257021-1-linux@treblig.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Remove needless 'return' in the following void APIs:
prcmu_early_init()
prcmu_system_reset()
prcmu_modem_reset()
Since both the API and callee involved are void functions.
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250221-rmv_return-v1-15-cc8dff275827@quicinc.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
With commit dcbb01fbb7ae ("x86/pci: Remove old STA2x11 support"), the core
driver for STA2x11 is not needed and cannot be built anymore.
Remove the driver and its header file.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250303100055.372689-1-lukas.bulwahn@redhat.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The header doesn't make use of any symbols declared in <linux/pwm.h>.
There are tree files that #include <mfd/lp3943.h>. Two of them
(i.e. drivers/gpio/gpio-lp3943.c and drivers/mfd/lp3943.c) also don't
use any and the third (drivers/pwm/pwm-lp3943.c) has an explicit include
of <linux/pwm.h> itself.
So drop the unused include. The intended side effect is that
drivers/gpio/gpio-lp3943.c and drivers/mfd/lp3943.c stop importing the
"PWM" module namespace.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20250212170403.36619-2-u.kleine-koenig@baylibre.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Utilise devm_*() managed resource helpers for freeing IRQs instead.
Reported-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Use chip ID and chip_data struct to differentiate between 3 PMIC devices in
probe(). Add TPS65214 resource information. Update descriptions and
copyright information to reflect the driver supports 3 PMIC devices.
Signed-off-by: Shree Ramamoorthy <s-ramamoorthy@ti.com>
Link: https://lore.kernel.org/r/20250206173725.386720-6-s-ramamoorthy@ti.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Use chip ID and chip_data struct to differentiate between devices in
probe(). Add TPS65215 resource information. Update descriptions and
copyright information to reflect the driver supports 2 PMIC devices.
Signed-off-by: Shree Ramamoorthy <s-ramamoorthy@ti.com>
Link: https://lore.kernel.org/r/20250206173725.386720-5-s-ramamoorthy@ti.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Add support for STM32MP25 SoC. Use newly introduced compatible, to handle
new features.
Identification and hardware configuration registers allow to read the
timer version and capabilities (counter width, number of channels...).
So, rework the probe to avoid touching ARR register by simply read the
counter width when available. This may avoid messing with a possibly
running timer.
Also add useful bit fields to stm32-timers header file.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20250110091922.980627-3-fabrice.gasnier@foss.st.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
|
|
Manivannan writes:
MHI Host
========
- Remove unused mhi_device_get() and mhi_queue_dma() APIs.
- Add support for SA8775p MHI endpoint device with IP_SW0 channel.
- Fix the race between mhi_unprepare_from_transfer() and mhi_queue_buf().
* tag 'mhi-for-v6.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mani/mhi:
bus: mhi: host: Fix race between unprepare and queue_buf
bus: mhi: host: pci_generic: Add support for SA8775P endpoint
bus: mhi: host: Remove unused functions
|
|
Jonathan writes:
IIO: New device support, features and cleanup for the 6.15 cycle.
The usual mixture of new drivers, support in existing drivers for new
devices, a range of features and general subsystem cleanup.
Two merges of immutable branches in here:
* SPI offload support. Culmination of a long effort to bring the ability
to offload triggered sequences of SPI operations to specific hardware,
allow high datarate acquisition over an SPI bus (if you have the right
hardware / FPGA firmware)
* GPIO set-array-helper - enables code simplification.
New device support
==================
adi,ad3552r-hs:
- Add support for AD3541r and AD3542r via newly supported FPGA HDL.
adi,ad4030
- New driver supporting the AD4030, AD4630 AD4630-16, AD4640-24, AD4632-16,
AD4632-24 1 and 2 channel high precision SPI ADCs.
adi,ad4851
- New driver and backend support for the AD4851, AD4852, AD4853, AD4854,
AD4855, AD4846, AD4857, AD4858 and AD4858I high speed multichannel
simultaneous sampling ADCs.
adi,ad7191
- New driver for this 24-bit ADC for precision bridge applications,
adi,ad7380
- Add support for the adaq4381-4 which is a 14-bit version of the
already supported adaq4380-1
adi,adis16550
- New driver using the ADIS library (which needed extensions) for this
IMU.
brcm,apds9160
- New driver for this proximity and ambient light sensor.
dynaimage,al3000a
- New driver for this illuminance sensor.
mcube,mc3230
- Add support for the mc3510c accelerometer with a different scale to existing
supported parts (some rework preceded this)
nxp,imx93
- Add compatibles for imx94 and imx95 which are fully compatible with imx93.
rockchip,saradc
- Add support for the RK3528 ADC
- Add support for the RK3562 ADC
silab,si7210
- New driver to support this I2C Hall effect magnetic position sensor.
ti,ads7138
- New driver supporting the ADS7128 and AD7138 I2C ADCs.
Staging driver drop
===================
adi,adis16240
- Drop this impact sensor. Interesting part but complex hence never left
staging due to ABI challenges. No longer readily available so drop driver.
New features
============
Documentation
- A really nice overview document introduce ADC terminology and how
it maps to IIO.
core
- New description for FAULT events, used in the ad7173.
- filter_type ABI used in ad4130.
buffer-dmaengine
- Split DMA channel request from buffer allocation (for SPI offload)
- Add a new _with_handle setup variant. (for SPI offload)
adi,adf4371
- Add control of reference clock type and support for frequency doubling
where appropriate.
adi,ad4695
- Support SPI offload.
- Support oversampling control.
adi,ad5791
- Support SPI offload.
adi,ad7124
- Add channel calibration support.
adi,ad7380:
- Alert support (threshold interrupts)
- SPI offload support.
adi,ad7606
- Support writing registers when using backend enabling software control
of modes.
adi,ad7944
- Support SPI offload.
adi,ad9832
- Use devm_regulator_get_enable() to simplify code.
adi,ad9834
- Use devm_regulator_get_enable() to simplify code.
adi,adxl345
- Improve IRQ handling code.
- Add debug access to registers.
bosch,bmi270
- Add temperature channel support.
- Add data ready trigger.
google,cross_ec
- Add trace events.
mcube,mc3230
- Add mount matrix support
- Add an OF match table.
Cleanup and minor bug fixes
===========================
Tree wide:
- Stop using iio_device_claim_direct_scoped() and introduce sparse friendly
iio_device_claim/release_direct()
The conditional scoped cleanup has proved hard to deal with, requiring
workarounds for various compiler issues and in is rather non-intuitive
so abandon that experiment. One of the attractions of that approach was
that it made it much harder to have unbalanced claim/release bugs so
instead introduce a conditional-lock style boolean returning new pair
of functions. These are inline in the header and have __acquire and
__release calls allowing sparse to detect lack of balance. There are
occasional false positives but so far those have reflected complex code
paths that benefited from cleanup anyway.
The first set of driver conversions are in this pull request, more to
follow next cycle. Various related cleanup in drivers.
Removal of the _scoped code is completed and the definition removed.
- Use of str_enable_disable() and similar helpers.
- Don't set regmap cache to REGCACHE_NONE as that's the default anyway.
- Change some caches from RBTREE to MAPLE reflecting best practice.
- Use the new gpiod_multi_set_value_cansleep()
- Make sure to grab direct mode for some calibrations paths.
- Avoid using memcmp on structures when checking for matching channel configs.
Instead just match field by field.
dt-bindings:
- Fix up indentation inconsistencies.
gts-helper:
- Simplify building of available scale table.
adi,ad-sigma-delta
- Make sure to disable channel after calibration done.
- Add error handling in configuring channel during calibration.
adi,ad2s1201
- use a bitmap_write() rather than directly accessing underlying storage.
adi,ad3552r-hs
- Fix a wrong error message.
- Make sure to use instruction mode for configuration.
adi,ad4695
- Add a conversion to ensure exit from conversion mode.
- Use custom regmap to handle required sclk rate change.
- Fix an out of bounds array access
- Simplify oversampling ratio handling.
adi,ad4851
- Fix a sign bug.
adi,ad5791
- Fix wrong exported number of storage bits.
adi,ad7124
- Disable all channels at probe to avoid strange initial configurations.
adi,ad7173
- Rework to allow static const struct ad_sigma_delta without need
to make a copy.
adi,ad7623
- Drop a BSD license tag that the authors consider unnecessary.
adi,ad7768-1
- Fix channels sign description exposed to user space.
- Set MOSI idle state to avoid accidental device reset.
- Avoid some overkill locking.
adi,axi-dac
- Check if device interface is busy when enabling data stream.
- Add control of bus mode.
bosch,bmi270
- Move a struct definition to a c file as only used there.
vishay,veml6030
- Enable regmap cache to reduce bus traffic.
- Fix ABI bug around scale reporting.
vishay,vem6075
- Check array bounds to harden against broken hardware.
Various other minor tweaks and fixes not called out.
*
* tag 'iio-for-6.15a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (223 commits)
doc: iio: ad7380: describe offload support
iio: ad7380: add support for SPI offload
iio: light: Add check for array bounds in veml6075_read_int_time_ms
iio: adc: ti-ads7924 Drop unnecessary function parameters
staging: iio: ad9834: Use devm_regulator_get_enable()
staging: iio: ad9832: Use devm_regulator_get_enable()
iio: gyro: bmg160_spi: add of_match_table
dt-bindings: iio: adc: Add i.MX94 and i.MX95 support
iio: adc: ad7768-1: remove unnecessary locking
Documentation: ABI: add wideband filter type to sysfs-bus-iio
iio: adc: ad7768-1: set MOSI idle state to prevent accidental reset
iio: adc: ad7768-1: Fix conversion result sign
iio: adc: ad7124: Benefit of dev = indio_dev->dev.parent in ad7124_parse_channel_config()
iio: adc: ad7124: Implement system calibration
iio: adc: ad7124: Implement internal calibration at probe time
iio: adc: ad_sigma_delta: Add error checking for ad_sigma_delta_set_channel()
iio: adc: ad4130: Adapt internal names to match official filter_type ABI
iio: adc: ad7173: Fix comparison of channel configs
iio: adc: ad7124: Fix comparison of channel configs
iio: adc: ad4130: Fix comparison of channel setups
...
|
|
Merge the for-6.14 to resolve conflicts with simple-card-utils.c due to
parallel delveopment.
|
Kumar Kartikeya Dwivedi
Yonghong Song
Linus Torvalds
Vlastimil Babka
Herbert Xu
Dionna Glaze
Dr. David Alan Gilbert
Dave Jiang
Rob Herring (Arm)
Smita Koralahalli
Sebastian Andrzej Siewior
Nicolas Frattaroli
Binbin Wu
Yan Zhao
Zhiming Hu
Kai Huang
Arnd Bergmann
Yicong Yang
Niklas Cassel
Alyssa Rosenzweig
Kees Cook
Zijun Hu
Lukas Bulwahn
Uwe Kleine-König
Lee Jones
Shree Ramamoorthy
Fabrice Gasnier
Greg Kroah-Hartman
Mark Brown