| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This will be used by the low level driver.
Note that link_id will be 0 in case of a non-MLO authentication.
Also fix a call-site of mgd_prepare_tx() where the link_id was not
populated.
Update the documentation to reflect the current state
ieee80211_prep_tx_info::link_id is also available in mgd_complete_tx().
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205110958.6a590f189ce5.I1fc5c0da26b143f5b07191eb592f01f7083d55ae@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add a strict mode where we disable certain workarounds and have
additional checks such as, for now, that VHT capabilities from
association response match those from beacon/probe response. We
can extend the checks in the future.
Make it an opt-in setting by the driver so it can be set there
in some driver-specific way, for example. Also allow setting
this one hw flag through the hwflags debugfs, by writing a new
strict=0 or strict=1 value.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205110958.5cecb0469479.I4a69617dc60ba0d6308416ffbc3102cfd08ba068@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add missing EHT MAC capabilities definitions.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205110958.6c1643c345a1.I7405b9c35cb39ae97a52c3fbcc36b0bd81e495dc@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add support for configuring EPCS state:
- When EPCS is enabled, send an EPCS enable request action frame
to the AP. When the AP replies with EPCS enable response, enable
EPCS by applying the QoS parameters provided by the AP. Do so for
all the valid MLD links. Once EPCS is enabled, support processing
of unsolicited EPCS enable response frames.
- When EPCS is disabled, send an EPCS teardown request to the AP
and apply the QoS parameters as obtained from the last received
beacons. Do so for all the valid links.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205110958.7a90afd7e140.I3f602d65f5c1fd849d6c70b12307dda33aa91ccb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Hostapd switched from cooked monitor interfaces to nl80211 Dec 2011.
Drop support for the outdated cooked monitor interfaces and fix
creating the virtual monitor interfaces in the following cases:
1) We have one non-monitor and one monitor interface with
%MONITOR_FLAG_ACTIVE enabled and then delete the non-monitor
interface.
2) We only have monitor interfaces enabled on resume while at least one
has %MONITOR_FLAG_ACTIVE set.
Signed-off-by: Alexander Wetzel <Alexander@wetzel-home.de>
Link: https://patch.msgid.link/20250204111352.7004-2-Alexander@wetzel-home.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Unconditionally start to refuse creating cooked monitor interfaces to
phase them out.
There is no feature flag for drivers to opt-in for cooked monitor and
all known users are using/preferring the modern API since the hostapd
release 1.0 in May 2012.
Signed-off-by: Alexander Wetzel <Alexander@wetzel-home.de>
Link: https://patch.msgid.link/20250204111352.7004-1-Alexander@wetzel-home.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
fib_nl_newrule() / fib_nl_delrule() is the doit() handler for
RTM_NEWRULE / RTM_DELRULE but also called from vrf_newlink().
Currently, we hold RTNL on both paths but will not on the former.
Also, we set dev_net(dev)->rtnl to skb->sk in vrf_fib_rule() because
fib_nl_newrule() / fib_nl_delrule() fetch net as sock_net(skb->sk).
Let's Factorise the two functions and pass net and rtnl_held flag.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250207072502.87775-6-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
l3mdev_l3_out() can be called without RCU being held:
raw_sendmsg()
ip_push_pending_frames()
ip_send_skb()
ip_local_out()
__ip_local_out()
l3mdev_ip_out()
Add rcu_read_lock() / rcu_read_unlock() pair to avoid
a potential UAF.
Fixes: a8e3e1a9f020 ("net: l3mdev: Add hook to output path")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250207135841.1948589-7-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The Dell AW1022z is an RTL8156B based 2.5G Ethernet controller.
Add the vendor and product ID values to the driver. This makes Ethernet
work with the adapter.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Link: https://patch.msgid.link/20250206224033.980115-1-olek2@wp.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, when your driver supports XSk Tx metadata and you want to
send an XSk frame, you need to do the following:
* call external xsk_buff_raw_get_dma();
* call inline xsk_buff_get_metadata(), which calls external
xsk_buff_raw_get_data() and then do some inline checks.
This effectively means that the following piece:
addr = pool->unaligned ? xp_unaligned_add_offset_to_addr(addr) : addr;
is done twice per frame, plus you have 2 external calls per frame, plus
this:
meta = pool->addrs + addr - pool->tx_metadata_len;
if (unlikely(!xsk_buff_valid_tx_metadata(meta)))
is always inlined, even if there's no meta or it's invalid.
Add xsk_buff_raw_get_ctx() (xp_raw_get_ctx() to be precise) to do that
in one go. It returns a small structure with 2 fields: DMA address,
filled unconditionally, and metadata pointer, non-NULL only if it's
present and valid. The address correction is performed only once and
you also have only 1 external call per XSk frame, which does all the
calculations and checks outside of your hotpath. You only need to
check `if (ctx.meta)` for the metadata presence.
To not copy any existing code, derive address correction and getting
virtual and DMA address into small helpers. bloat-o-meter reports no
object code changes for the existing functionality.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20250206182630.3914318-5-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are cases when we need to explicitly unroll loops. For example,
cache operations, filling DMA descriptors on very high speeds etc.
Add compiler-specific attribute macros to give the compiler a hint
that we'd like to unroll a loop.
Example usage:
#define UNROLL_BATCH 8
unrolled_count(UNROLL_BATCH)
for (u32 i = 0; i < UNROLL_BATCH; i++)
op(priv, i);
Note that sometimes the compilers won't unroll loops if they think this
would have worse optimization and perf than without unrolling, and that
unroll attributes are available only starting GCC 8. For older compiler
versions, no hints/attributes will be applied.
For better unrolling/parallelization, don't have any variables that
interfere between iterations except for the iterator itself.
Co-developed-by: Jose E. Marchesi <jose.marchesi@oracle.com> # pragmas
Signed-off-by: Jose E. Marchesi <jose.marchesi@oracle.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20250206182630.3914318-2-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
KEXEC_CORE_NOTE_NAME is no longer used.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Acked-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Link: https://lore.kernel.org/r/20250115-elf-v5-6-0f9e55bbb2fc@daynix.com
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Use note name macros to match with the userspace's expectation.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Acked-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Link: https://lore.kernel.org/r/20250115-elf-v5-4-0f9e55bbb2fc@daynix.com
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
elf.h had a comment saying:
> Notes used in ET_CORE. Architectures export some of the arch register
> sets using the corresponding note types via the PTRACE_GETREGSET and
> PTRACE_SETREGSET requests.
> The note name for these types is "LINUX", except NT_PRFPREG that is
> named "CORE".
However, NT_PRSTATUS is also named "CORE". It is also unclear what
"these types" refers to.
To fix these problems, define a name for each note type. The added
definitions are macros so the kernel and userspace can directly refer to
them to remove their duplicate definitions of note names.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Acked-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Link: https://lore.kernel.org/r/20250115-elf-v5-1-0f9e55bbb2fc@daynix.com
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
The sanity checks in hrtimer_update_function() are expensive for high
frequency usage like in the io/uring code due to locking.
Hide the sanity checks behind CONFIG_PROVE_LOCKING, which has a decent
chance to be enabled on a regular basis for testing.
Fixes: 8f02e3563bb5 ("hrtimers: Introduce hrtimer_update_function()")
Reported-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/87ikpllali.ffs@tglx
|
|
Add a new devm_iio_dmaengine_buffer_setup_with_handle() function to
handle cases where the DMA channel is managed by the caller rather than
being requested and released by the iio_dmaengine module.
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250207-dlech-mainline-spi-engine-offload-2-v8-9-e48a489be48c@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Refactor the IIO dmaengine buffer code to split requesting the DMA
channel from allocating the buffer. We want to be able to add a new
function where the IIO device driver manages the DMA channel, so these
two actions need to be separate.
To do this, calling dma_request_chan() is moved from
iio_dmaengine_buffer_alloc() to iio_dmaengine_buffer_setup_ext(). A new
__iio_dmaengine_buffer_setup_ext() helper function is added to simplify
error unwinding and will also be used by a new function in a later
patch.
iio_dmaengine_buffer_free() now only frees the buffer and does not
release the DMA channel. A new iio_dmaengine_buffer_teardown() function
is added to unwind everything done in iio_dmaengine_buffer_setup_ext().
This keeps things more symmetrical with obvious pairs alloc/free and
setup/teardown.
Calling dma_get_slave_caps() in iio_dmaengine_buffer_alloc() is moved so
that we can avoid any gotos for error unwinding.
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250207-dlech-mainline-spi-engine-offload-2-v8-8-e48a489be48c@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
spi: Add offload APIs
This series adds support for offloading complete SPI transactions,
including the initiation, to the hardware.
|
|
After the previous changes 'sd' is always NULL.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20250128150313.GA15336@redhat.com
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Depending on CONFIG_HAVE_ARCH_SECCOMP_FILTER, __secure_computing(NULL)
will crash or not. This is not consistent/safe, especially considering
that after the previous change __secure_computing(sd) is always called
with sd == NULL.
Fortunately, if CONFIG_HAVE_ARCH_SECCOMP_FILTER=n, __secure_computing()
has no callers, these architectures use secure_computing_strict(). Yet
it make sense make __secure_computing(NULL) safe in this case.
Note also that with this change we can unexport secure_computing_strict()
and change the current callers to use __secure_computing(NULL).
Fixes: 8cf8dfceebda ("seccomp: Stub for !HAVE_ARCH_SECCOMP_FILTER")
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250128150307.GA15325@redhat.com
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Until this point, the kernel can use hardware-wrapped keys to do
encryption if userspace provides one -- specifically a key in
ephemerally-wrapped form. However, no generic way has been provided for
userspace to get such a key in the first place.
Getting such a key is a two-step process. First, the key needs to be
imported from a raw key or generated by the hardware, producing a key in
long-term wrapped form. This happens once in the whole lifetime of the
key. Second, the long-term wrapped key needs to be converted into
ephemerally-wrapped form. This happens each time the key is "unlocked".
In Android, these operations are supported in a generic way through
KeyMint, a userspace abstraction layer. However, that method is
Android-specific and can't be used on other Linux systems, may rely on
proprietary libraries, and also misleads people into supporting KeyMint
features like rollback resistance that make sense for other KeyMint keys
but don't make sense for hardware-wrapped inline encryption keys.
Therefore, this patch provides a generic kernel interface for these
operations by introducing new block device ioctls:
- BLKCRYPTOIMPORTKEY: convert a raw key to long-term wrapped form.
- BLKCRYPTOGENERATEKEY: have the hardware generate a new key, then
return it in long-term wrapped form.
- BLKCRYPTOPREPAREKEY: convert a key from long-term wrapped form to
ephemerally-wrapped form.
These ioctls are implemented using new operations in blk_crypto_ll_ops.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Tested-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> # sm8650
Link: https://lore.kernel.org/r/20250204060041.409950-4-ebiggers@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
To prevent keys from being compromised if an attacker acquires read
access to kernel memory, some inline encryption hardware can accept keys
which are wrapped by a per-boot hardware-internal key. This avoids
needing to keep the raw keys in kernel memory, without limiting the
number of keys that can be used. Such hardware also supports deriving a
"software secret" for cryptographic tasks that can't be handled by
inline encryption; this is needed for fscrypt to work properly.
To support this hardware, allow struct blk_crypto_key to represent a
hardware-wrapped key as an alternative to a raw key, and make drivers
set flags in struct blk_crypto_profile to indicate which types of keys
they support. Also add the ->derive_sw_secret() low-level operation,
which drivers supporting wrapped keys must implement.
For more information, see the detailed documentation which this patch
adds to Documentation/block/inline-encryption.rst.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Tested-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> # sm8650
Link: https://lore.kernel.org/r/20250204060041.409950-2-ebiggers@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
'struct drm_device' is not used at all in this file since commit
aa6c43644bc5 ("drm/panel: drop drm_device from drm_panel").
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250206-drm-cleanups-v1-1-93df60faa756@bootlin.com
|
|
The global functions spinand_otp_read() and spinand_otp_write() have
been introduced. Since most SPI-NAND flashes read/write OTP in the same
way, let's define global functions to avoid code duplication.
Signed-off-by: Martin Kurbanov <mmkurbanov@salutedevices.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Change the functions spinand_wait() and spinand_otp_page_size() from
static to global so that SPI NAND flash drivers don't duplicate it.
Signed-off-by: Martin Kurbanov <mmkurbanov@salutedevices.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The MTD subsystem already supports accessing two OTP areas: user and
factory. User areas can be written by the user.
This patch provides the SPINAND_FACT_OTP_INFO and SPINAND_USER_OTP_INFO
macros to add parameters to spinand_info.
To implement OTP operations, the client (flash driver) is provided with
callbacks for user area:
.read(), .write(), .info(), .lock(), .erase();
and for factory area:
.read(), .info();
Signed-off-by: Martin Kurbanov <mmkurbanov@salutedevices.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Change these functions from static to global so that to use them later
in OTP operations. Since reading OTP pages is no different from reading
pages from the main area.
Signed-off-by: Martin Kurbanov <mmkurbanov@salutedevices.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The !CONFIG_SECURITY dummy function was declared as an "extern int"
instead of "static inline" (likely a copy-n-paste error), which was
was causing the compiler to complain about a missing prototype. This
patch converts the dummy definition over to a "static inline" to resolve
the compiler problems.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/oe-kbuild-all/202502081912.TeokpAAe-lkp@intel.com/
Fixes: c6ad9fdbd44b ("io_uring,lsm,selinux: add LSM hooks for io_uring_setup()")
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
After we remove ext4 journal callback, transaction->t_private_list is
not used anymore. Just remove unused transaction->t_private_list.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20241218145414.1422946-3-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The current iomap_iter iteration model reads the mapping from the
filesystem, processes the subrange of the operation associated with
the current mapping, and returns the number of bytes processed back
to the iteration code. The latter advances the position and
remaining length of the iter in preparation for the next iteration.
At the _iter() handler level, this tends to produce a processing
loop where the local code pulls the current position and remaining
length out of the iter, iterates it locally based on file offset,
and then breaks out when the associated range has been fully
processed.
This works well enough for current handlers, but upcoming
enhancements require a bit more flexibility in certain situations.
Enhancements for zero range will lead to a situation where the
processing loop is no longer a pure ascending offset walk, but
rather dictated by pagecache state and folio lookup. Since folio
lookup and write preparation occur at different levels, it is more
difficult to manage position and length outside of the iter.
To provide more flexibility to certain iomap operations, introduce
support for incremental iomap_iter advances from within the
operation itself. This allows more granular advances for operations
that might not use the typical file offset based walk.
Note that the semantics for operations that use incremental advances
is slightly different than traditional operations. Operations that
advance the iter directly are expected to return success or failure
(i.e. 0 or negative error code) in iter.processed rather than the
number of bytes processed.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Link: https://lore.kernel.org/r/20250207143253.314068-8-bfoster@redhat.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
As a final step for generic iter advance, export the helper and
update it to return the remaining length of the current iteration
after the advance. This will usually be 0 in the iomap_iter() case,
but will be useful for the various operations that iterate on their
own and will be updated to advance as they progress.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Link: https://lore.kernel.org/r/20250207143253.314068-7-bfoster@redhat.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In preparation to support more granular iomap iter advancing, factor
the pos/len values as parameters to length calculation.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Link: https://lore.kernel.org/r/20250207143253.314068-2-bfoster@redhat.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Reduce use of internal __dma_request_channel() function in public
dmaengine.h.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250205145757.889247-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Replace dma_request_slave_channel() by dma_request_chan() as suggested
since the former is deprecated.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250205145757.889247-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add missing clock IDs for the CIF (Camera InterFace) blocks
on the RK3188/RK3066.
Signed-off-by: Val Packett <val@packett.cool>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20241205182954.5346-1-val@packett.cool
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The LOOKUP_ bits are not in order, which can make it awkward when adding
new bits. Two bits have recently been added to the end which makes them
look like "scoping flags", but in fact they aren't.
Also LOOKUP_PARENT is described as "internal use only" but is used in
fs/nfs/
This patch:
- Moves these three flags into the "pathwalk mode" section
- changes all bits to use the BIT(n) macro
- Allocates bits in order leaving gaps between the sections,
and documents those gaps.
Signed-off-by: NeilBrown <neilb@suse.de>
Link: https://lore.kernel.org/r/20250206054504.2950516-8-neilb@suse.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Bits 13, 23, 24, and 27 are not used. Move all those holes to the end.
Signed-off-by: NeilBrown <neilb@suse.de>
Link: https://lore.kernel.org/r/20250206054504.2950516-7-neilb@suse.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add Intel PTL-H audio Device ID.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250210081730.22916-2-peter.ujfalusi@linux.intel.com
|
|
Pull Kbuild fixes from Masahiro Yamada:
- Suppress false-positive -Wformat-{overflow,truncation}-non-kprintf
warnings regardless of the W= option
- Avoid CONFIG_TRIM_UNUSED_KSYMS dropping symbols passed to symbol_get()
- Fix a build regression of the Debian linux-headers package
* tag 'kbuild-fixes-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: install-extmod-build: add missing quotation marks for CC variable
kbuild: fix misspelling in scripts/Makefile.lib
kbuild: keep symbols for symbol_get() even with CONFIG_TRIM_UNUSED_KSYMS
scripts/Makefile.extrawarn: Do not show clang's non-kprintf warnings at W=1
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Correctly clean the BSS to the PoC before allowing EL2 to access it
on nVHE/hVHE/protected configurations
- Propagate ownership of debug registers in protected mode after the
rework that landed in 6.14-rc1
- Stop pretending that we can run the protected mode without a GICv3
being present on the host
- Fix a use-after-free situation that can occur if a vcpu fails to
initialise the NV shadow S2 MMU contexts
- Always evaluate the need to arm a background timer for fully
emulated guest timers
- Fix the emulation of EL1 timers in the absence of FEAT_ECV
- Correctly handle the EL2 virtual timer, specially when HCR_EL2.E2H==0
s390:
- move some of the guest page table (gmap) logic into KVM itself,
inching towards the final goal of completely removing gmap from the
non-kvm memory management code.
As an initial set of cleanups, move some code from mm/gmap into kvm
and start using __kvm_faultin_pfn() to fault-in pages as needed;
but especially stop abusing page->index and page->lru to aid in the
pgdesc conversion.
x86:
- Add missing check in the fix to defer starting the huge page
recovery vhost_task
- SRSO_USER_KERNEL_NO does not need SYNTHESIZED_F"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (31 commits)
KVM: x86/mmu: Ensure NX huge page recovery thread is alive before waking
KVM: remove kvm_arch_post_init_vm
KVM: selftests: Fix spelling mistake "initally" -> "initially"
kvm: x86: SRSO_USER_KERNEL_NO is not synthesized
KVM: arm64: timer: Don't adjust the EL2 virtual timer offset
KVM: arm64: timer: Correctly handle EL1 timer emulation when !FEAT_ECV
KVM: arm64: timer: Always evaluate the need for a soft timer
KVM: arm64: Fix nested S2 MMU structures reallocation
KVM: arm64: Fail protected mode init if no vgic hardware is present
KVM: arm64: Flush/sync debug state in protected mode
KVM: s390: selftests: Streamline uc_skey test to issue iske after sske
KVM: s390: remove the last user of page->index
KVM: s390: move PGSTE softbits
KVM: s390: remove useless page->index usage
KVM: s390: move gmap_shadow_pgt_lookup() into kvm
KVM: s390: stop using lists to keep track of used dat tables
KVM: s390: stop using page->index for non-shadow gmaps
KVM: s390: move some gmap shadowing functions away from mm/gmap.c
KVM: s390: get rid of gmap_translate()
KVM: s390: get rid of gmap_fault()
...
|
|
With the "crct10dif" algorithm having been removed from the crypto API,
crc_t10dif_is_optimized() is no longer used.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250208175647.12333-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Herbert notes that DIV_ROUND_UP() may overflow unnecessarily if an ecdsa
implementation's ->key_size() callback returns an unusually large value.
Herbert instead suggests (for a division by 8):
X / 8 + !!(X & 7)
Based on this formula, introduce a generic DIV_ROUND_UP_POW2() macro and
use it in lieu of DIV_ROUND_UP() for ->key_size() return values.
Additionally, use the macro in ecc_digits_from_bytes(), whose "nbytes"
parameter is a ->key_size() return value in some instances, or a
user-specified ASN.1 length in the case of ecdsa_get_signature_rs().
Link: https://lore.kernel.org/r/Z3iElsILmoSu6FuC@gondor.apana.org.au/
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The callers of crypto_sig_sign() assume that the signature size is
always equivalent to the key size.
This happens to be true for RSA, which is currently the only algorithm
implementing the ->sign() callback. But it is false e.g. for X9.62
encoded ECDSA signatures because they have variable length.
Prepare for addition of a ->sign() callback to such algorithms by
letting the callback return the signature size (or a negative integer
on error). When testing the ->sign() callback in test_sig_one(),
use crypto_sig_maxsize() instead of crypto_sig_keysize() to verify that
the test vector's signature does not exceed an algorithm's maximum
signature size.
There has been a relatively recent effort to upstream ECDSA signature
generation support which may benefit from this change:
https://lore.kernel.org/linux-crypto/20220908200036.2034-1-ignat@cloudflare.com/
However the main motivation for this commit is to reduce the number of
crypto_sig_keysize() callers: This function is about to be changed to
return the size in bits instead of bytes and that will require amending
most callers to divide the return value by 8.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Cc: Ignat Korchagin <ignat@cloudflare.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Extend guard APIs with missing raw/spinlock_bh variants.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Remove the "crct10dif" shash algorithm from the crypto API. It has no
known user now that the lib is no longer built on top of it. It has no
remaining references in kernel code. The only other potential users
would be the usual components that allow specifying arbitrary hash
algorithms by name, namely AF_ALG and dm-integrity. However there are
no indications that "crct10dif" is being used with these components.
Debian Code Search and web searches don't find anything relevant, and
explicitly grepping the source code of the usual suspects (cryptsetup,
libell, iwd) finds no matches either. "crc32" and "crc32c" are used in
a few more places, but that doesn't seem to be the case for "crct10dif".
crc_t10dif_update() is also tested by crc_kunit now, so the test
coverage provided via the crypto self-tests is no longer needed.
Also note that the "crct10dif" shash algorithm was inconsistent with the
rest of the shash API in that it wrote the digest in CPU endianness,
making the resulting byte array differ on little endian vs. big endian
platforms. This means it was effectively just built for use by the lib
functions, and it was not actually correct to treat it as "just another
hash function" that could be dropped in via the shash API.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20250206173857.39794-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Following the standardization on crc32c() as the lib entry point for the
Castagnoli CRC32 instead of the previous mix of crc32c(), crc32c_le(),
and __crc32c_le(), make the same change to the underlying base and arch
functions that implement it.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250208024911.14936-7-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Since the Castagnoli CRC32 is now always just crc32c(), rename
__crc32c_le_combine() and __crc32c_le_shift() accordingly.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250208024911.14936-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
For historical reasons, the Castagnoli CRC32 is available under 3 names:
crc32c(), crc32c_le(), and __crc32c_le(). Most callers use crc32c().
The more verbose versions are not really warranted; there is no "_be"
version that the "_le" version needs to be differentiated from, and the
leading underscores are pointless.
Therefore, let's standardize on just crc32c(). Remove the other two
names, and update callers accordingly.
Specifically, the new crc32c() comes from what was previously
__crc32c_le(), so compared to the old crc32c() it now takes a size_t
length rather than unsigned int, and it's now in linux/crc32.h instead
of just linux/crc32c.h (which includes linux/crc32.h).
Later patches will also rename __crc32c_le_combine(), crc32c_le_base(),
and crc32c_le_arch().
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250208024911.14936-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Drop the use of __pure and __attribute_const__ from the CRC32 library
functions that had them. Both of these are unusual optimizations that
don't help properly written code. They seem more likely to cause
problems than have any real benefit.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250208024911.14936-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Update crc32_le(), crc32_be(), and __crc32c_le() to take the data as a
'const void *' instead of 'const u8 *'.
This makes them slightly easier to use, as it can eliminate the need for
casts in the calling code. It's the only pointer argument, so there is
no possibility for confusion with another pointer argument.
Also, some of the CRC library functions, for example crc32c() and
crc64_be(), already used 'const void *'. Let's standardize on that, as
it seems like a better choice.
The underlying base and arch functions continue to use 'const u8 *', as
that is often more convenient for the implementation.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250208024911.14936-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
Emmanuel Grumbach
Johannes Berg
Ilan Peer
Alexander Wetzel
Kuniyuki Iwashima
Eric Dumazet
Aleksander Jan Bajkowski
Alexander Lobakin
Akihiko Odaki
Thomas Gleixner
David Lechner
Jonathan Cameron
Oleg Nesterov
Eric Biggers
Luca Ceresoli
Martin Kurbanov
Paul Moore
Kemeng Shi
Brian Foster
Andy Shevchenko
Val Packett
NeilBrown
Pierre-Louis Bossart
Linus Torvalds
Lukas Wunner
Christian Marangi