| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
GFX 1250 allows the debugger to subcribe to LDS out-of-range read/write
memory violations.
Bump IOCTL minor version and flag KFD capabilities for enablement
hint.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix kernel-doc comments in include/linux/shdma-base.h to avoid
most warnings:
- prefix an enum name with "enum"
- prefix enum values with '@'
- prefix struct member names with '@'
shdma-base.h:28: warning: cannot understand function prototype:
'enum shdma_pm_state '
Warning: shdma-base.h:103 struct member 'desc_completed' not described
in 'shdma_ops'
Warning: shdma-base.h:103 struct member 'halt_channel' not described
in 'shdma_ops'
Warning: shdma-base.h:103 struct member 'channel_busy' not described
in 'shdma_ops'
Warning: shdma-base.h:103 struct member 'slave_addr' not described
in 'shdma_ops'
Warning: shdma-base.h:103 struct member 'desc_setup' not described
in 'shdma_ops'
Warning: shdma-base.h:103 struct member 'set_slave' not described
in 'shdma_ops'
Warning: shdma-base.h:103 struct member 'setup_xfer' not described
in 'shdma_ops'
Warning: shdma-base.h:103 struct member 'start_xfer' not described
in 'shdma_ops'
Warning: shdma-base.h:103 struct member 'embedded_desc' not described
in 'shdma_ops'
Warning: shdma-base.h:103 struct member 'chan_irq' not described
in 'shdma_ops'
This one is not fixed: from 4f46f8ac80416:
Warning: shdma-base.h:103 struct member 'get_partial' not described
in 'shdma_ops'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20251104002001.445297-1-rdunlap@infradead.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Use the correct enum name in its kernel-doc heading.
Add ending ':' to struct member names.
Drop the @id: kernel-doc entry since there is no struct member named 'id'.
edma.h:46: warning: expecting prototype for struct dw_edma_core_ops.
Prototype was for struct dw_edma_plat_ops instead
Warning: edma.h:101 struct member 'ops' not described in 'dw_edma_chip'
Warning: edma.h:101 struct member 'flags' not described in 'dw_edma_chip'
Warning: edma.h:101 struct member 'reg_base' not described
in 'dw_edma_chip'
Warning: edma.h:101 struct member 'll_wr_cnt' not described
in 'dw_edma_chip'
Warning: edma.h:101 struct member 'll_rd_cnt' not described
in 'dw_edma_chip'
Warning: edma.h:101 struct member 'll_region_wr' not described
in 'dw_edma_chip'
Warning: edma.h:101 struct member 'll_region_rd' not described
in 'dw_edma_chip'
Warning: edma.h:101 struct member 'dt_region_wr' not described
in 'dw_edma_chip'
Warning: edma.h:101 struct member 'dt_region_rd' not described
in 'dw_edma_chip'
Warning: edma.h:101 struct member 'mf' not described in 'dw_edma_chip'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20251101191524.1991135-1-rdunlap@infradead.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Netfilter code (net/netfilter/nft_log.c and net/netfilter/xt_AUDIT.c)
have to be kept in sync. Both source files had duplicated versions of
audit_ip4() and audit_ip6() functions, which can result in lack of
consistency and/or duplicated work.
This patch adds a helper function in audit.c that can be called by
netfilter code commonly, aiming to improve maintainability and
consistency.
Suggested-by: Florian Westphal <fw@strlen.de>
Suggested-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Ricardo Robaina <rrobaina@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
In the EFI config table, rename LINUX_EFI_SCREEN_INFO_TABLE_GUID to
LINUX_EFI_PRIMARY_DISPLAY_TABLE_GUID. Read sysfb_primary_display from
the entry. In addition to the screen_info, the entry now also contains
EDID information.
In libstub, replace struct screen_info with struct sysfb_display_info
from the kernel's sysfb_primary_display and rename functions
accordingly. Transfer it to the runtime kernel using the kernel's
global state or the LINUX_EFI_PRIMARY_DISPLAY_TABLE_GUID config-table
entry.
With CONFIG_FIRMWARE_EDID=y, libstub now transfers the GOP device's EDID
information to the kernel. If CONFIG_FIRMWARE_EDID=n, EDID information
is disabled. Make the Kconfig symbol CONFIG_FIRMWARE_EDID available with
EFI. Setting the value to 'n' disables EDID support.
Also rename screen_info.c to primary_display.c and adapt the contained
comment according to the changes.
Link: https://lore.kernel.org/all/20251126160854.553077-8-tzimmermann@suse.de/
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
[ardb: depend on EFI_GENERIC_STUB not EFI, fix conflicts after dropping
the preceding patch from the series]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Move x86's edid_info into sysfb_primary_display as a new field named
edid. Adapt all users.
An instance of edid_info has only been defined on x86. With the move
into sysfb_primary_display, it becomes available on all architectures.
Therefore remove this contraint from CONFIG_FIRMWARE_EDID.
x86 fills the EDID data from boot_params.edid_info. DRM drivers pick
up the raw data and make it available to DRM clients. Replace the
drivers' references to edid_info and instead use the sysfb_display_info
as passed from sysfb.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Replace the global screen_info with sysfb_primary_display of type
struct sysfb_display_info. Adapt all users of screen_info.
Instances of screen_info are defined for x86, loongarch and EFI,
with only one instance compiled into a specific build. Replace all
of them with sysfb_primary_display.
All existing users of screen_info are updated by pointing them to
sysfb_primary_display.screen instead. This introduces some churn to
the code, but has no impact on functionality.
Boot parameters and EFI config tables are unchanged. They transfer
screen_info as before. The logic in EFI's alloc_screen_info() changes
slightly, as it now returns the screen field of sysfb_primary_display.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # drivers/pci/
Reviewed-by: Richard Lyu <richard.lyu@suse.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Add struct sysfb_display_info to wrap display-related state. For now
it contains only the screen's video mode. Later EDID will be added as
well.
This struct will be helpful for passing display state to sysfb drivers
or from the EFI stub library.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Richard Lyu <richard.lyu@suse.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Replace usage of global screen_info with local pointers. This will
later reduce churn when screen_info is being moved.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Richard Lyu <richard.lyu@suse.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Add support for Dosilicon DS35Q1GA (3.3V) and DS35M1GA (1.8V) SPI NAND.
These are 1Gbit (128MB) devices with:
- 2048 byte pages + 64 byte OOB
- 64 pages per block, 1024 blocks
- On-die 4-bit ECC per 512 byte sector
The 64-byte OOB area is divided into 4 segments of 16 bytes, with each
segment containing 8 bytes of user data (M2+M1) and 8 bytes of ECC
parity (R1). This provides 30 bytes of usable OOB space after reserving
2 bytes for the bad block marker.
Tested on Genexis Platinum 4410 (EcoNet EN751221) by writing known
patterns to OOB and verifying ECC parity placement in R1 regions.
Datasheet:
https://www.dosilicon.com/resources/SPI%20NAND/DS35X1GAXXX_rev08.pdf
Signed-off-by: Ahmed Naseef <naseefkm@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Pull shmem rename fixes from Al Viro:
"A couple of shmem rename fixes - recent regression from tree-in-dcache
series and older breakage from stable directory offsets stuff"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
shmem: fix recovery on rename failures
shmem_whiteout(): fix regression from tree-in-dcache series
|
|
maple_tree insertions can fail if we are seriously short on memory;
simple_offset_rename() does not recover well if it runs into that.
The same goes for simple_offset_rename_exchange().
Moreover, shmem_whiteout() expects that if it succeeds, the caller will
progress to d_move(), i.e. that shmem_rename2() won't fail past the
successful call of shmem_whiteout().
Not hard to fix, fortunately - mtree_store() can't fail if the index we
are trying to store into is already present in the tree as a singleton.
For simple_offset_rename_exchange() that's enough - we just need to be
careful about the order of operations.
For simple_offset_rename() solution is to preinsert the target into the
tree for new_dir; the rest can be done without any potentially failing
operations.
That preinsertion has to be done in shmem_rename2() rather than in
simple_offset_rename() itself - otherwise we'd need to deal with the
possibility of failure after successful shmem_whiteout().
Fixes: a2e459555c5f ("shmem: stable directory offsets")
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Use the correct struct member names to avoid kernel-doc warnings:
Warning: include/linux/lsm_hooks.h:83 struct member 'name' not described
in 'lsm_id'
Warning: include/linux/lsm_hooks.h:183 struct member 'initcall_device' not
described in 'lsm_info'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
For example,
1327.539878: f2fs_preload_pages_start: dev = (252,16), ino = 14, i_size = 4294967296 start: 0, end: 8191
1327.539878: page_cache_sync_ra: dev=252:16 ino=e index=0 req_count=8192 order=9 size=0 async_size=0 ra_pages=4096 mmap_miss=0 prev_pos=-1
1327.539879: page_cache_ra_order: dev=252:16 ino=e index=0 order=9 size=4096 async_size=2048 ra_pages=4096
1327.541895: f2fs_readpages: dev = (252,16), ino = 14, start = 0 nrpage = 4096
1327.541930: f2fs_lookup_extent_tree_start: dev = (252,16), ino = 14, pgofs = 0, type = Read
1327.541931: f2fs_lookup_read_extent_tree_end: dev = (252,16), ino = 14, pgofs = 0, read_ext_info(fofs: 0, len: 1048576, blk: 4221440)
1327.541931: f2fs_map_blocks: dev = (252,16), ino = 14, file offset = 0, start blkaddr = 0x406a00, len = 0x1000, flags = 2, seg_type = 8, may_create = 0, multidevice = 0, flag = 0, err = 0
1327.541989: f2fs_read_folio: dev = (252,16), ino = 14, DATA, FILE, index = 0, nr_pages = 512, dirty = 0, uptodate = 0
1327.542012: f2fs_read_folio: dev = (252,16), ino = 14, DATA, FILE, index = 512, nr_pages = 512, dirty = 0, uptodate = 0
1327.542036: f2fs_read_folio: dev = (252,16), ino = 14, DATA, FILE, index = 1024, nr_pages = 512, dirty = 0, uptodate = 0
1327.542080: f2fs_read_folio: dev = (252,16), ino = 14, DATA, FILE, index = 1536, nr_pages = 512, dirty = 0, uptodate = 0
1327.542127: f2fs_read_folio: dev = (252,16), ino = 14, DATA, FILE, index = 2048, nr_pages = 512, dirty = 0, uptodate = 0
1327.542151: f2fs_read_folio: dev = (252,16), ino = 14, DATA, FILE, index = 2560, nr_pages = 512, dirty = 0, uptodate = 0
1327.542196: f2fs_read_folio: dev = (252,16), ino = 14, DATA, FILE, index = 3072, nr_pages = 512, dirty = 0, uptodate = 0
1327.542219: f2fs_read_folio: dev = (252,16), ino = 14, DATA, FILE, index = 3584, nr_pages = 512, dirty = 0, uptodate = 0
1327.542239: f2fs_submit_read_bio: dev = (252,16)/(252,16), rw = READ(R), DATA, sector = 33771520, size = 16777216
1327.542269: page_cache_sync_ra: dev=252:16 ino=e index=4096 req_count=8192 order=9 size=4096 async_size=2048 ra_pages=4096 mmap_miss=0 prev_pos=-1
1327.542289: page_cache_ra_order: dev=252:16 ino=e index=4096 order=9 size=4096 async_size=2048 ra_pages=4096
1327.544485: f2fs_readpages: dev = (252,16), ino = 14, start = 4096 nrpage = 4096
1327.544521: f2fs_lookup_extent_tree_start: dev = (252,16), ino = 14, pgofs = 4096, type = Read
1327.544521: f2fs_lookup_read_extent_tree_end: dev = (252,16), ino = 14, pgofs = 4096, read_ext_info(fofs: 0, len: 1048576, blk: 4221440)
1327.544522: f2fs_map_blocks: dev = (252,16), ino = 14, file offset = 4096, start blkaddr = 0x407a00, len = 0x1000, flags = 2, seg_type = 8, may_create = 0, multidevice = 0, flag = 0, err = 0
1327.544550: f2fs_read_folio: dev = (252,16), ino = 14, DATA, FILE, index = 4096, nr_pages = 512, dirty = 0, uptodate = 0
1327.544575: f2fs_read_folio: dev = (252,16), ino = 14, DATA, FILE, index = 4608, nr_pages = 512, dirty = 0, uptodate = 0
1327.544601: f2fs_read_folio: dev = (252,16), ino = 14, DATA, FILE, index = 5120, nr_pages = 512, dirty = 0, uptodate = 0
1327.544647: f2fs_read_folio: dev = (252,16), ino = 14, DATA, FILE, index = 5632, nr_pages = 512, dirty = 0, uptodate = 0
1327.544692: f2fs_read_folio: dev = (252,16), ino = 14, DATA, FILE, index = 6144, nr_pages = 512, dirty = 0, uptodate = 0
1327.544734: f2fs_read_folio: dev = (252,16), ino = 14, DATA, FILE, index = 6656, nr_pages = 512, dirty = 0, uptodate = 0
1327.544777: f2fs_read_folio: dev = (252,16), ino = 14, DATA, FILE, index = 7168, nr_pages = 512, dirty = 0, uptodate = 0
1327.544805: f2fs_read_folio: dev = (252,16), ino = 14, DATA, FILE, index = 7680, nr_pages = 512, dirty = 0, uptodate = 0
1327.544826: f2fs_submit_read_bio: dev = (252,16)/(252,16), rw = READ(R), DATA, sector = 33804288, size = 16777216
1327.544852: f2fs_preload_pages_end: dev = (252,16), ino = 14, i_size = 4294967296 start: 8192, end: 8191
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
The Renesas RZ/T2H (R9A09G077) and Renesas RZ/N2H (R9A09G087) SoCs have an
Interrupt Controller (ICU) that supports interrupts from external pins IRQ0
to IRQ15, and SEI, and software-triggered interrupts INTCPU0 to INTCPU15.
INTCPU0 to INTCPU13, IRQ0 to IRQ13 are non-safety interrupts, while
INTCPU14, INTCPU15, IRQ14, IRQ15 and SEI are safety interrupts, and are
exposed via a separate register space.
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251201112933.488801-3-cosmin-gabriel.tanislav.xa@renesas.com
|
|
The exec and vm_bind ioctl allow userspace to specify an arbitrary
num_syncs value. Without bounds checking, a very large num_syncs
can force an excessively large allocation, leading to kernel warnings
from the page allocator as below.
Introduce DRM_XE_MAX_SYNCS (set to 1024) and reject any request
exceeding this limit.
"
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1217 at mm/page_alloc.c:5124 __alloc_frozen_pages_noprof+0x2f8/0x2180 mm/page_alloc.c:5124
...
Call Trace:
<TASK>
alloc_pages_mpol+0xe4/0x330 mm/mempolicy.c:2416
___kmalloc_large_node+0xd8/0x110 mm/slub.c:4317
__kmalloc_large_node_noprof+0x18/0xe0 mm/slub.c:4348
__do_kmalloc_node mm/slub.c:4364 [inline]
__kmalloc_noprof+0x3d4/0x4b0 mm/slub.c:4388
kmalloc_noprof include/linux/slab.h:909 [inline]
kmalloc_array_noprof include/linux/slab.h:948 [inline]
xe_exec_ioctl+0xa47/0x1e70 drivers/gpu/drm/xe/xe_exec.c:158
drm_ioctl_kernel+0x1f1/0x3e0 drivers/gpu/drm/drm_ioctl.c:797
drm_ioctl+0x5e7/0xc50 drivers/gpu/drm/drm_ioctl.c:894
xe_drm_ioctl+0x10b/0x170 drivers/gpu/drm/xe/xe_device.c:224
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:598 [inline]
__se_sys_ioctl fs/ioctl.c:584 [inline]
__x64_sys_ioctl+0x18b/0x210 fs/ioctl.c:584
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xbb/0x380 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
...
"
v2: Add "Reported-by" and Cc stable kernels.
v3: Change XE_MAX_SYNCS from 64 to 1024. (Matt & Ashutosh)
v4: s/XE_MAX_SYNCS/DRM_XE_MAX_SYNCS/ (Matt)
v5: Do the check at the top of the exec func. (Matt)
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Reported-by: Koen Koning <koen.koning@intel.com>
Reported-by: Peter Senna Tschudin <peter.senna@linux.intel.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6450
Cc: <stable@vger.kernel.org> # v6.12+
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Michal Mrozek <michal.mrozek@intel.com>
Cc: Carl Zhang <carl.zhang@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Ivan Briano <ivan.briano@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251205234715.2476561-5-shuicheng.lin@intel.com
|
|
Add infrastructure to redirect interrupt handler execution to a
different CPU when the current CPU is not part of the interrupt's CPU
affinity mask.
This is primarily aimed at (de)multiplexed interrupts, where the child
interrupt handler runs in the context of the parent interrupt handler,
and therefore CPU affinity control for the child interrupt is typically
not available.
With the new infrastructure, the child interrupt is allowed to freely
change its affinity setting, independently of the parent. If the
interrupt handler happens to be triggered on an "incompatible" CPU (a
CPU that's not part of the child interrupt's affinity mask), the handler
is redirected and runs in IRQ work context on a "compatible" CPU.
No functional change is being made to any existing irqchip driver, and
irqchip drivers must be explicitly modified to use the newly added
infrastructure to support interrupt redirection.
Originally-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Radu Rendec <rrendec@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/linux-pci/878qpg4o4t.ffs@tglx/
Link: https://patch.msgid.link/20251128212055.1409093-2-rrendec@redhat.com
|
|
setup_percpu_irq() was always a bad kludge, and should have never
been there the first place. Now that the last users are gone,
remove it for good.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251210082242.360936-7-maz@kernel.org
|
|
With the IRQ timing stuff being gone, there is no need to specify a flag
when requesting a percpu interrupt. Not only IRQF_TIMER was the only flag
(set of flags actually) allowed, but nobody ever passed it.
Get rid of __request_percpu_irq(), which was only getting 0 as flags, and
promote request_percpu_irq_affinity() as its replacement.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20251210082242.360936-3-maz@kernel.org
|
|
The IRQ timing tracking infrastructure was merged in 2019, but was never
plumbed in, is not selectable, and is therefore never used.
As Daniel agrees that there is little hope for this infrastructure to be
completed in the near term, drop it altogether.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/87zf7vex6h.wl-maz@kernel.org
Link: https://patch.msgid.link/20251210082242.360936-2-maz@kernel.org
|
|
fchmodat2(), introduced in version 6.6 is currently not in the change
attribute class of audit. Calling fchmodat2() to change a file
attribute in the same fashion than chmod() or fchmodat() will bypass
audit rules such as:
-w /tmp/test -p rwa -k test_rwa
The current patch adds fchmodat2() to the change attributes class.
Signed-off-by: Jeffrey Bencteux <jeff@bencteux.fr>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Eliminate all kernel-doc warnings in <linux/msi.h>:
- add "struct" to struct kernel-doc headers
- add missing struct member descriptions or correct typos in them
Fixes these warnings:
Warning: include/linux/msi.h:60 cannot understand function prototype:
'struct msi_msg'
Warning: include/linux/msi.h:73 struct member 'arch_addr_lo' not described
in 'msi_msg'
Warning: include/linux/msi.h:73 struct member 'arch_addr_hi' not described
in 'msi_msg'
Warning: include/linux/msi.h:106 cannot understand function prototype:
'struct pci_msi_desc'
Warning: include/linux/msi.h:124 struct member 'msi_attrib' not described
in 'pci_msi_desc'
Warning: include/linux/msi.h:204 struct member 'sysfs_attrs' not described
in 'msi_desc'
Warning: include/linux/msi.h:227 struct member 'domain' not described in
'msi_dev_domain'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251214202341.2205675-1-rdunlap@infradead.org
|
|
New network transport protocols want NIC drivers to get hardware timestamps
of all incoming packets, and possibly all outgoing packets.
One example is the upcoming 'Swift congestion control' which is used by TCP
transport and is the primary need for timecounter_cyc2time(). This means
timecounter_cyc2time() can be called more than 100 million times per second
on a busy server.
Inlining timecounter_cyc2time() brings a 12% improvement on a UDP receive
stress test on a 100Gbit NIC.
Note that FDO, LTO, PGO are unable to magically help for this case,
presumably because NIC drivers are almost exclusively shipped as modules.
Add an unlikely() around the cc_cyc2ns_backwards() case, even if FDO (when
used) is able to take care of this optimization.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://research.google/pubs/swift-delay-is-simple-and-effective-for-congestion-control-in-the-datacenter/
Link: https://patch.msgid.link/20251129095740.3338476-1-edumazet@google.com
|
|
Requesting a delegation on a file from the userland fcntl() interface
currently succeeds when there are conflicting opens present.
This is because the lease handling code ignores conflicting opens for
FL_LAYOUT and FL_DELEG leases. This was a hack put in place long ago,
because nfsd already checks for conflicts in its own way. The kernel
needs to perform this check for userland delegations the same way it is
done for leases, however.
Make this dependent on the lease_manager by adding a new
->lm_open_conflict() lease_manager operation and have
generic_add_lease() call that instead of check_conflicting_open().
Morph check_conflicting_open() into a ->lm_open_conflict() op that is
only called for userland leases/delegations. Set the
->lm_open_conflict() operations for nfsd to trivial functions that
always return 0.
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20251204-dir-deleg-ro-v2-2-22d37f92ce2c@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Zhang Yi points out that the dynamic folio_batch allocation in
iomap_fill_dirty_folios() is problematic for the ext4 on iomap work
that is under development because it doesn't sufficiently handle the
allocation failure case (by allowing a retry, for example). We've
also seen lockdep (via syzbot) complain recently about the scope of
the allocation.
The dynamic allocation was initially added for simplicity and to
help indicate whether the batch was used or not by the calling fs.
To address these issues, put the batch on the stack of
iomap_zero_range() and use a flag to control whether the batch
should be used in the iomap folio lookup path. This keeps things
simple and eliminates allocation issues with lockdep and for ext4 on
iomap.
While here, also clean up the fill helper signature to be more
consistent with the underlying filemap helper. Pass through the
return value of the filemap helper (folio count) and update the
lookup offset via an out param.
Fixes: 395ed1ef0012 ("iomap: optional zero range dirty folio processing")
Signed-off-by: Brian Foster <bfoster@redhat.com>
Link: https://patch.msgid.link/20251208140548.373411-1-bfoster@redhat.com
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
While the used GML is consistent with the pattern for other Intel * Lake
SoCs, the de facto use is GLK. Update the acronym and users accordingly.
Note, a handful of the drivers for Gemini Lake in the Linux kernel use
GLK already (LPC, MEI, pin control, SDHCI, ...) and even some in ASoC.
The only ones in this patch used the inconsistent one.
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # pci_ids.h
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20251212181742.3944789-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When there is no fallback possibility available for the function topology
use it is better to try to create a profile for the card in best effort
manner, leaving out non supported links for example.
As an example: some laptops present SSPx-BT link but we don't have fragment
yet to support this. If we only have support for functional topology
without monolithic fallback then we would fail the card creation.
The reason why the monolithic topology works on the same device is that it
does not have the SSPx-BT link handled, it is ignored.
In case when there is no fallback possibility we should try to create the
card with links that we support as best effort instead of failing and
leaving the user without a card.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20251215101036.9370-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
On system suspend / resume we always power up the DSP and boot the
firmware, which is not strictly needed as right after the firmware booted
up we power the DSP down again on suspend and we also power it down after
resume after some inactivity.
Out of caution, add a new platform descriptor flag to enable on-demand
DSP boot since this might not work without changes to platform code on
certain platforms.
With the on-demand dsp boot enabled we will not boot the DSP and firmware
up on system or rpm resume, just enable audio subsystem since audio IPs,
like HDA and SoundWire might be needed (codecs suspend/resume operation).
Only boot up the DSP during the first hw_params() call when the DSP is
really going to be needed.
In this way we can handle the audio related use cases:
normal audio use (rpm suspend/resume)
system suspend/resume without active audio
system suspend/resume with active audio
system suspend/resume without active audio, and audio start before the rpm
suspend timeout
Add module option to force the on-demand DSP boot to allow it to be
disabled or enabled without kernel change for testing.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://patch.msgid.link/20251215132946.2155-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Hamza Mahfooz reports cpu soft lock-ups in
nft_chain_validate():
watchdog: BUG: soft lockup - CPU#1 stuck for 27s! [iptables-nft-re:37547]
[..]
RIP: 0010:nft_chain_validate+0xcb/0x110 [nf_tables]
[..]
nft_immediate_validate+0x36/0x50 [nf_tables]
nft_chain_validate+0xc9/0x110 [nf_tables]
nft_immediate_validate+0x36/0x50 [nf_tables]
nft_chain_validate+0xc9/0x110 [nf_tables]
nft_immediate_validate+0x36/0x50 [nf_tables]
nft_chain_validate+0xc9/0x110 [nf_tables]
nft_immediate_validate+0x36/0x50 [nf_tables]
nft_chain_validate+0xc9/0x110 [nf_tables]
nft_immediate_validate+0x36/0x50 [nf_tables]
nft_chain_validate+0xc9/0x110 [nf_tables]
nft_immediate_validate+0x36/0x50 [nf_tables]
nft_chain_validate+0xc9/0x110 [nf_tables]
nft_table_validate+0x6b/0xb0 [nf_tables]
nf_tables_validate+0x8b/0xa0 [nf_tables]
nf_tables_commit+0x1df/0x1eb0 [nf_tables]
[..]
Currently nf_tables will traverse the entire table (chain graph), starting
from the entry points (base chains), exploring all possible paths
(chain jumps). But there are cases where we could avoid revalidation.
Consider:
1 input -> j2 -> j3
2 input -> j2 -> j3
3 input -> j1 -> j2 -> j3
Then the second rule does not need to revalidate j2, and, by extension j3,
because this was already checked during validation of the first rule.
We need to validate it only for rule 3.
This is needed because chain loop detection also ensures we do not exceed
the jump stack: Just because we know that j2 is cycle free, its last jump
might now exceed the allowed stack size. We also need to update all
reachable chains with the new largest observed call depth.
Care has to be taken to revalidate even if the chain depth won't be an
issue: chain validation also ensures that expressions are not called from
invalid base chains. For example, the masquerade expression can only be
called from NAT postrouting base chains.
Therefore we also need to keep record of the base chain context (type,
hooknum) and revalidate if the chain becomes reachable from a different
hook location.
Reported-by: Hamza Mahfooz <hamzamahfooz@linux.microsoft.com>
Closes: https://lore.kernel.org/netfilter-devel/20251118221735.GA5477@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net/
Tested-by: Hamza Mahfooz <hamzamahfooz@linux.microsoft.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Now that the last in-tree filesystem has been converted to the new mount
API, remove all legacy mount API code designed to handle un-converted
filesystems, and remove associated documentation as well.
(The code to handle the legacy mount(2) syscall from userspace is still
in place, of course.)
Tested with an allmodconfig build on x86_64, and a sanity check of an
old mount(2) syscall mount.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Link: https://patch.msgid.link/20251212174403.2882183-1-sandeen@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Note no effort is made to make sure structs embedding the namespace are
themselves aligned, so this is not guaranteed to eliminate cacheline
bouncing due to refcount management.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://patch.msgid.link/20251203092851.287617-2-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Opening and closing an inode dirties the ->i_readcount field.
Depending on the alignment of the inode, it may happen to false-share
with other fields loaded both for both operations to various extent.
This notably concerns the ->i_flctx field.
Since most inodes don't have the field populated, this bit can be managed
with a flag in ->i_opflags instead which bypasses the problem.
Here are results I obtained while opening a file read-only in a loop
with 24 cores doing the work on Sapphire Rapids. Utilizing the flag as
opposed to reading ->i_flctx field was toggled at runtime as the benchmark
was running, to make sure both results come from the same alignment.
before: 3233740
after: 3373346 (+4%)
before: 3284313
after: 3518711 (+7%)
before: 3505545
after: 4092806 (+16%)
Or to put it differently, this varies wildly depending on how (un)lucky
you get.
The primary bottleneck before and after is the avoidable lockref trip in
do_dentry_open().
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://patch.msgid.link/20251203094837.290654-2-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Matches the idiom of storing a pointer with a release fence and safely
getting the content with a consume fence after.
Eliminates an actual fence on some archs.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://patch.msgid.link/20251203094837.290654-1-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Sync-up some display code needed for Async flips refactor.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Extend `struct mnt_id_req` to take in a fd and introduce STATMOUNT_BY_FD
flag. When a valid fd is provided and STATMOUNT_BY_FD is set, statmount
will return mountinfo about the mount the fd is on.
This even works for "unmounted" mounts (mounts that have been umounted
using umount2(mnt, MNT_DETACH)), if you have access to a file descriptor
on that mount. These "umounted" mounts will have no mountpoint and no
valid mount namespace. Hence, we unset the STATMOUNT_MNT_POINT and
STATMOUNT_MNT_NS_ID in statmount.mask for "unmounted" mounts.
In case of STATMOUNT_BY_FD, given that we already have access to an fd
on the mount, accessing mount information without a capability check
seems fine because of the following reasons:
- All fs related information is available via fstatfs() without any
capability check.
- Mount information is also available via /proc/pid/mountinfo (without
any capability check).
- Given that we have access to a fd on the mount which tells us that we
had access to the mount at some point (or someone that had access gave
us the fd). So, we should be able to access mount info.
Co-developed-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Signed-off-by: Bhavik Sachdev <b.sachdev1904@gmail.com>
Link: https://patch.msgid.link/20251129091455.757724-3-b.sachdev1904@gmail.com
Acked-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
While knfsd offers combined exclusive create and open results to clients,
on some filesystems those results may not be atomic. This behavior can be
observed. For example, an open O_CREAT with mode 0 will succeed in creating
the file but unexpectedly return -EACCES from vfs_open().
Additionally reducing the number of remote RPC calls required for O_CREAT
on network filesystem provides a performance benefit in the open path.
Teach knfsd's helper dentry_create() to use atomic_open() for filesystems
that support it. The previously const @path is passed up to atomic_open()
and may be modified depending on whether an existing entry was found or if
the atomic_open() returned an error and consumed the passed-in dentry.
Signed-off-by: Benjamin Coddington <bcodding@hammerspace.com>
Link: https://patch.msgid.link/8e449bfb64ab055abb9fd82641a171531415a88c.1764259052.git.bcodding@hammerspace.com
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Renesas RZ/T2H and RZ/N2H XSPI Clock DT Binding Definitions
XSPI Clock DT binding definitions for the Renesas RZ/T2H (R9A09G077) and
RZ/N2H (R9A09G087) SoCs, shared by driver and DT source files.
|
|
Add indices for video encoder, demodulator and CVBS clocks.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Chuan Liu <chuan.liu@amlogic.com>
Link: https://lore.kernel.org/r/20250919-add_video_clk-v6-1-fe223161fb3f@amlogic.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
|
|
Add DT bindings for the peripheral clock controller of the Amlogic T7
SoC family.
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20251212022619.3072132-4-jian.hu@amlogic.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
|
|
Add DT bindings for the SCMI clock controller of the Amlogic T7 SoC family.
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20251212022619.3072132-3-jian.hu@amlogic.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
|
|
Add DT bindings for the PLL clock controller of the Amlogic T7 SoC family.
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20251212022619.3072132-2-jian.hu@amlogic.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
|
|
Sort the parent interface struct definitions and members to improve
clarity on where to add new stuff.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/7f2e45d030e78928ebc8cf0a6d0fb47a3aa13c48.1765548786.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
There are a handful of function pointers that don't really warrant a
dedicated sub-struct for the functionality. Group all of them together
in a single anonymous sub-struct.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/4305b09a93ce2c8ca83bf1fbb3cc7ef5a29d1567.1765548786.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Fix some typos in the kernel-doc.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/b293e25aa00418908e67576e8adcab325319705a.1765548786.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Let's kickstart the v6.20 (7.0?) release cycle.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
We have currently used up 30 out of the 32-bits in the struct ata_device
struct member quirks. Thus, it is only possible to add two more quirks.
Change the struct ata_device struct member quirks from an unsigned int to
an u64.
Doing this core level change now, will make it easier for us now, as we
will not need to also do core level changes once the final two bits are
used as well.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
Modify the existing libata.force parameters "max_sec_128" and
"max_sec_1024" to use the generic ATA_QUIRK_MAX_SEC quirk rather than
individual quirks.
This also allows us to remove the individual quirks ATA_QUIRK_MAX_SEC_128
and ATA_QUIRK_MAX_SEC_1024.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
Add a new quirk ATA_QUIRK_MAX_SEC, which has a separate table with device
specific values.
Convert all existing ATA_QUIRK_MAX_SEC_XXX device quirks in
__ata_dev_quirks to the new format.
Quirks ATA_QUIRK_MAX_SEC_128 and ATA_QUIRK_MAX_SEC_1024 cannot be removed
yet, since they are also used by libata.force, which functionally, is a
separate user of the quirks. The quirks will be removed once all users
have been converted to use the new format.
The quirk ATA_QUIRK_MAX_SEC_8191 can be removed since it has no equivalent
libata.force parameter.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
There's no real space concerns here and keeping these fields
in a union makes reading (and tracing) the scheduler code harder.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://patch.msgid.link/20251201064647.1851919-4-mingo@kernel.org
|
|
Introduce a bus specific probe and remove function. For now this only
allows to get rid of a cast of the generic device to an snd_seq device
in the drivers and changes the remove prototype to return void---a
non-zero return value is ignored anyhow.
The objective is to get rid of users of struct device callbacks
.probe(), .remove() and .shutdown() to eventually remove these. Until
all snd_seq drivers are converted this results in a runtime warning
about the drivers needing an update because there is a bus probe
function and a driver probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/f36b01b297fc5cbb6d0ed4959143add0c13eec99.1765283601.git.u.kleine-koenig@baylibre.com
|
Jonathan Kim
Randy Dunlap
Ricardo Robaina
Thomas Zimmermann
Ahmed Naseef
Linus Torvalds
Al Viro
Jaegeuk Kim
Cosmin Tanislav
Shuicheng Lin
Radu Rendec
Marc Zyngier
Jeffrey Bencteux
Eric Dumazet
Jeff Layton
Brian Foster
Andy Shevchenko
Peter Ujfalusi
Florian Westphal
Eric Sandeen
Mateusz Guzik
Rodrigo Vivi
Bhavik Sachdev
Benjamin Coddington
Geert Uytterhoeven
Chuan Liu
Jian Hu
Jani Nikula
Maxime Ripard
Niklas Cassel
Ingo Molnar
Uwe Kleine-König