| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add in a sanitization function for ID_AA64PFR2_EL1, preserving the
already-present behaviour for the FPMR, MTEFAR, and MTESTOREONLY
fields. Add sanitisation for the GCIE field, which is set to IMP if
the host supports a GICv5 guest and NI, otherwise.
Extend the sanitisation that takes place in kvm_vgic_create() to zero
the ID_AA64PFR2.GCIE field when a non-GICv5 GIC is created. More
importantly, move this sanitisation to a separate function,
kvm_vgic_finalize_sysregs(), and call it from kvm_finalize_sys_regs().
We are required to finalize the GIC and GCIE fields a second time in
kvm_finalize_sys_regs() due to how QEMU blindly reads out then
verbatim restores the system register state. This avoids the issue
where both the GCIE and GIC features are marked as present (an
architecturally invalid combination), and hence guests fall over. See
the comment in kvm_finalize_sys_regs() for more details.
Overall, the following happens:
* Before an irqchip is created, FEAT_GCIE is presented if the host
supports GICv5-based guests.
* Once an irqchip is created, all other supported irqchips are hidden
from the guest; system register state reflects the guest's irqchip.
* Userspace is allowed to set invalid irqchip feature combinations in
the system registers, but...
* ...invalid combinations are removed a second time prior to the first
run of the guest, and things hopefully just work.
All of this extra work is required to make sure that "legacy" GICv3
guests based on QEMU transparently work on compatible GICv5 hosts
without modification.
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20260319154937.3619520-13-sascha.bischoff@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
As part of booting the system and initialising KVM, create and
populate a mask of the implemented PPIs. This mask allows future PPI
operations (such as save/restore or state, or syncing back into the
shadow state) to only consider PPIs that are actually implemented on
the host.
The set of implemented virtual PPIs matches the set of implemented
physical PPIs for a GICv5 host. Therefore, this mask represents all
PPIs that could ever by used by a GICv5-based guest on a specific
host, albeit pre-filtered by what we support in KVM (see next
paragraph).
Only architected PPIs are currently supported in KVM with
GICv5. Moreover, as KVM only supports a subset of all possible PPIS
(Timers, PMU, GICv5 SW_PPI) the PPI mask only includes these PPIs, if
present. The timers are always assumed to be present; if we have KVM
we have EL2, which means that we have the EL1 & EL2 Timer PPIs. If we
have a PMU (v3), then the PMUIRQ is present. The GICv5 SW_PPI is
always assumed to be present.
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20260319154937.3619520-12-sascha.bischoff@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
GICv5 has moved from using interrupt ranges for different interrupt
types to using some of the upper bits of the interrupt ID to denote
the interrupt type. This is not compatible with older GICs (which rely
on ranges of interrupts to determine the type), and hence a set of
helpers is introduced. These helpers take a struct kvm*, and use the
vgic model to determine how to interpret the interrupt ID.
Helpers are introduced for PPIs, SPIs, and LPIs. Additionally, a
helper is introduced to determine if an interrupt is private - SGIs
and PPIs for older GICs, and PPIs only for GICv5.
Additionally, vgic_is_v5() is introduced (which unsurpisingly returns
true when running a GICv5 guest), and the existing vgic_is_v3() check
is moved from vgic.h to arm_vgic.h (to live alongside the vgic_is_v5()
one), and has been converted into a macro.
The helpers are plumbed into the core vgic code, as well as the Arch
Timer and PMU code.
There should be no functional changes as part of this change.
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20260319154937.3619520-10-sascha.bischoff@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
This is the base GICv5 device which is to be used with the
KVM_CREATE_DEVICE ioctl to create a GICv5-based vgic.
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20260319154937.3619520-9-sascha.bischoff@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Prior to this change, the act of mapping a virtual IRQ to a physical
one also set the irq_ops. Unmapping then reset the irq_ops to NULL. So
far, this has been fine and hasn't caused any major issues.
Now, however, as GICv5 support is being added to KVM, it has become
apparent that conflating mapping/unmapping IRQs and setting/clearing
irq_ops can cause issues. The reason is that the upcoming GICv5
support introduces a set of default irq_ops for PPIs, and removing
this when unmapping will cause things to break rather horribly.
Split out the mapping/unmapping of IRQs from the setting/clearing of
irq_ops. The arch timer code is updated to set the irq_ops following a
successful map. The irq_ops are intentionally not removed again on an
unmap as the only irq_op introduced by the arch timer only takes
effect if the hw bit in struct vgic_irq is set. Therefore, it is safe
to leave this in place, and it avoids additional complexity when GICv5
support is introduced.
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Link: https://patch.msgid.link/20260319154937.3619520-6-sascha.bischoff@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Add an io_uring command handler to the generic BSG layer. The new
.uring_cmd file operation validates io_uring features and delegates
handling to a per-queue bsg_uring_cmd_fn callback.
Extend bsg_register_queue() so transport drivers can register both
sg_io and io_uring command handlers.
Signed-off-by: Yang Xiuwei <yangxiuwei@kylinos.cn>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260317072226.2598233-3-yangxiuwei@kylinos.cn
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add the bsg_uring_cmd structure to the BSG UAPI header to support
io_uring-based SCSI passthrough operations via IORING_OP_URING_CMD.
Signed-off-by: Yang Xiuwei <yangxiuwei@kylinos.cn>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260317072226.2598233-2-yangxiuwei@kylinos.cn
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
For a short time this file was used by the SHA-256 and Poly1305 library
code, but they are no longer using it. Remove this unused file.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260314173526.17349-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
|
|
This chip identifies as Tegra238, so update the BPMP ABI header to refer
to it by the correct name.
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add support for HID devices that report multiple batteries, each
identified by its report ID.
The hid_device->battery pointer is replaced with a batteries list.
Batteries are named using the pattern hid-{uniq}-battery-{report_id}.
The hid_get_battery() helper returns the first battery in the list for
backwards compatibility with single-battery drivers.
Signed-off-by: Lucas Zampieri <lcasmz54@gmail.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Introduce struct hid_battery to encapsulate individual battery state,
preparing for future multi-battery support.
The new structure contains all battery-related fields previously stored
directly in hid_device (capacity, min, max, report_type, report_id,
charge_status, etc.). The hid_device->battery pointer type changes from
struct power_supply* to struct hid_battery*, and all battery functions
are refactored accordingly.
A hid_get_battery() helper is added for external drivers, with
hid-apple.c and hid-magicmouse.c updated to use the new API. The
hid-input-test.c KUnit tests are also updated for the new structure.
No functional changes for single-battery devices.
Signed-off-by: Lucas Zampieri <lcasmz54@gmail.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Johannes Berg says:
====================
Aside from various small improvements/cleanups, not much:
- cfg80211/mac80211: S1G and UHR improvements
- hwsim: incumbent signal report test support
* tag 'wireless-next-2026-03-19' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (31 commits)
qtnfmac: use alloc_netdev macro for single queue devices
wifi: libertas: don't kill URBs in interrupt context
wifi: libertas: use USB anchors for tracking in-flight URBs
wifi: nl80211: use int for band coming from netlink
wifi: rsi_91x_usb: do not pause rfkill polling when stopping mac80211
wifi: mac80211: fix STA link removal during link removal
wifi: nl80211: reject S1G/60G with HT chantype
wifi: ieee80211: fix definition of EHT-MCS 15 in MRU
wifi: cfg80211: check non-S1G width with S1G chandef
wifi: cfg80211: restrict cfg80211_chandef_create() to only HT-based bands
wifi: mac80211: don't use cfg80211_chandef_create() for default chandef
wifi: mac80211: Remove deleted sta links in ieee80211_ml_reconf_work()
wifi: b43: use register definitions in nphy_op_software_rfkill
wifi: cfg80211: split control freq check from chandef check
wifi: mac80211: always use full chanctx compatible check
wifi: mac80211: refactor chandef tracing macros
wifi: mac80211: validate HE 6 GHz operation when EHT is used
wifi: nl80211: split out UHR operation information
wifi: mwifiex: drop redundant device reference
wifi: rt2x00: drop redundant device reference
...
====================
Link: https://patch.msgid.link/20260319082439.79875-3-johannes@sipsolutions.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This patch adds VF610_CLK_ESW and VF610_CLK_ESW_MAC_TAB{0123}
macros definitions for L2 switch.
Those definitions describe clocks for MoreThanIP switch IP block;
the switch itself and the MAC address lookup table clocks.
Signed-off-by: Lukasz Majewski <lukma@nabladev.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://patch.msgid.link/20260129095442.1646748-4-lukma@nabladev.com
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
|
|
The VF610_CLK_END should be dropped as it is not part of the ABI.
Signed-off-by: Lukasz Majewski <lukma@nabladev.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://patch.msgid.link/20260129095442.1646748-3-lukma@nabladev.com
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
|
|
In network setup as below:
fastpath bypass
.----------------------------------------.
/ \
| IP - forwarding |
| / \ v
| / wan ...
| /
| |
| |
| brlan.1
| |
| +-------------------------------+
| | vlan 1 |
| | |
| | brlan (vlan-filtering) |
| | +---------------+
| | | DSA-SWITCH |
| | vlan 1 | |
| | to | |
| | untagged 1 vlan 1 |
| +---------------+---------------+
. / \
----->wlan1 lan0
. .
. ^
^ vlan 1 tagged packets
untagged packets
br_vlan_fill_forward_path_mode() sets DEV_PATH_BR_VLAN_UNTAG_HW when
filling in from brlan.1 towards wlan1. But it should be set to
DEV_PATH_BR_VLAN_UNTAG in this case. Using BR_VLFLAG_ADDED_BY_SWITCHDEV
is not correct. The dsa switchdev adds it as a foreign port.
The same problem for all foreignly added dsa vlans on the bridge.
First add the vlan, trying only native devices.
If this fails, we know this may be a vlan from a foreign device.
Use BR_VLFLAG_TAGGING_BY_SWITCHDEV to make sure DEV_PATH_BR_VLAN_UNTAG_HW
is set only when there if no foreign device involved.
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Eric Woudstra <ericwouds@gmail.com>
Link: https://patch.msgid.link/20260317110347.363875-1-ericwouds@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Antonio Quartulli says:
====================
Included features:
* use bitops.h API when possible
* send netlink notification in case of client float event
* implement support for asymmetric peer IDs
* consolidate memory allocations during crypto operations
* add netlink notification check in selftests
* add FW mark check in selftest
* tag 'ovpn-net-next-20260317' of https://github.com/OpenVPN/ovpn-net-next:
ovpn: consolidate crypto allocations in one chunk
selftests: ovpn: add test for the FW mark feature
selftests: ovpn: check asymmetric peer-id
ovpn: add support for asymmetric peer IDs
selftests: ovpn: add notification parsing and matching
ovpn: notify userspace on client float event
ovpn: pktid: use bitops.h API
ovpn: use correct array size to parse nested attributes in ovpn_nl_key_swap_doit
selftests: ovpn: allow compiling ovpn-cli.c with mbedtls3
====================
Link: https://patch.msgid.link/20260317104023.192548-1-antonio@openvpn.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Bring in series "drm/{i915,xe}: sort out step enums between the drivers"
that was merged through i915.
Link: https://lore.kernel.org/all/cover.1772635152.git.jani.nikula@intel.com
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Convert existing MIPI code to use operation function pointers, a necessary
step for supporting Tegra20/Tegra30 SoCs. All common MIPI configuration
that is SoC-independent remains in mipi.c, while all SoC-specific code is
moved to tegra114-mipi.c (The naming matches the first SoC generation with
a dedicated calibration block). Shared structures and function calls are
placed into tegra-mipi-cal.h.
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # tegra20, parallel camera
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Acked-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
In HFS+ b-trees, the node allocation bitmap is stored across multiple
records. The first chunk resides in the b-tree Header Node at record
index 2, while all subsequent chunks are stored in dedicated Map Nodes
at record index 0.
This structural quirk forces callers like hfs_bmap_alloc() and
hfs_bmap_free() to duplicate boilerplate code to validate offsets, correct
lengths, and map the underlying pages via kmap_local_page(). There is
also currently no strict node-type validation before reading these
records, leaving the allocator vulnerable if a corrupted image points a
map linkage to an Index or Leaf node.
Introduce a unified bit-level API to encapsulate the map record access:
1. A new `struct hfs_bmap_ctx` to cleanly pass state and safely handle
page math across all architectures.
2. `hfs_bmap_get_map_page()`: Automatically validates node types
(HFS_NODE_HEADER vs HFS_NODE_MAP), infers the correct record index,
handles page-boundary math, and returns the unmapped `struct page *`
directly to the caller to avoid asymmetric mappings.
3. `hfs_bmap_clear_bit()`: A clean wrapper that internally handles page
mapping/unmapping for single-bit operations.
Refactor hfs_bmap_alloc() and hfs_bmap_free() to utilize this new API.
This deduplicates the allocator logic, hardens the map traversal against
fuzzed images, and provides the exact abstractions needed for upcoming
mount-time validation checks.
Signed-off-by: Shardul Bankar <shardul.b@mpiricsoftware.com>
Reviewed-by: Viacheslav Dubeyko <slava@dubeyko.com>
Tested-by: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Link: https://lore.kernel.org/r/20260318073823.3933718-2-shardul.b@mpiricsoftware.com
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
|
|
For RX CQEs with type CQE_RX_COALESCED_4, to measure the coalescing
efficiency, add counters to count how many contains 2, 3, 4 packets
respectively.
Also, add a counter for the error case of first packet with length == 0.
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/20260317191826.1346111-4-haiyangz@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Our NIC can have up to 4 RX packets on 1 CQE. To support this feature,
check and process the type CQE_RX_COALESCED_4. The default setting is
disabled, to avoid possible regression on latency.
And, add ethtool handler to switch this feature. To turn it on, run:
ethtool -C <nic> rx-cqe-frames 4
To turn it off:
ethtool -C <nic> rx-cqe-frames 1
The rx-cqe-nsec is the time out value in nanoseconds after the first
packet arrival in a coalesced CQE to be sent. It's read-only for this
NIC.
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/20260317191826.1346111-3-haiyangz@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add two parameters for drivers supporting Rx CQE coalescing /
descriptor writeback.
ETHTOOL_A_COALESCE_RX_CQE_FRAMES:
Maximum number of frames that can be coalesced into a CQE or
writeback.
ETHTOOL_A_COALESCE_RX_CQE_NSECS:
Max time in nanoseconds after the first packet arrival in a
coalesced CQE or writeback to be sent.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/20260317191826.1346111-2-haiyangz@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Johannes Berg says:
====================
Just a few updates:
- cfg80211:
- guarantee pmsr work is cancelled
- mac80211:
- reject TDLS operations on non-TDLS stations
- fix crash in AP_VLAN bandwidth change
- fix leak or double-free on some TX preparation
failures
- remove keys needed for beacons _after_ stopping
those
- fix debugfs static branch race
- avoid underflow in inactive time
- fix another NULL dereference in mesh on invalid
frames
- ti/wlcore: avoid infinite realloc loop
* tag 'wireless-2026-03-18' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: always free skb on ieee80211_tx_prepare_skb() failure
wifi: wlcore: Return -ENOMEM instead of -EAGAIN if there is not enough headroom
wifi: mac80211: fix NULL deref in mesh_matches_local()
wifi: mac80211: check tdls flag in ieee80211_tdls_oper
wifi: cfg80211: cancel pmsr_free_wk in cfg80211_pmsr_wdev_down
wifi: mac80211: Fix static_branch_dec() underflow for aql_disable.
mac80211: fix crash in ieee80211_chan_bw_change for AP_VLAN stations
wifi: mac80211: use jiffies_delta_to_msecs() for sta_info inactive times
wifi: mac80211: remove keys after disabling beaconing
wifi: mac80211_hwsim: fully initialise PMSR capabilities
====================
Link: https://patch.msgid.link/20260318172515.381148-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are 5 more GDSCs that we were ignoring and not putting to sleep,
which are listed in downstream DTS. Add them.
Signed-off-by: Val Packett <val@packett.cool>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260312112321.370983-2-val@packett.cool
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Tariq Toukan says:
====================
mlx5-next updates 2026-03-17
The following pull-request contains common mlx5 updates
* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Expose MLX5_UMR_ALIGN definition
{net/RDMA}/mlx5: Add LAG demux table API and vport demux rules
net/mlx5: Add VHCA RX flow destination support for FW steering
net/mlx5: LAG, replace mlx5_get_dev_index with LAG sequence number
net/mlx5: E-switch, modify peer miss rule index to vhca_id
net/mlx5: LAG, use xa_alloc to manage LAG device indices
net/mlx5: LAG, replace pf array with xarray
net/mlx5: Add silent mode set/query and VHCA RX IFC bits
net/mlx5: Add IFC bits for shared headroom pool PBMC support
net/mlx5: Expose TLP emulation capabilities
net/mlx5: Add TLP emulation device capabilities
====================
Link: https://patch.msgid.link/20260317075844.12066-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Merge the IPQ5210 Global clock controller binding through a topic
branch, to allow the constants to also be merged into the DeviceTree
branch.
|
|
Add binding for the Qualcomm IPQ5210 Global Clock Controller.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260318-ipq5210_boot_to_shell-v2-1-a87e27c37070@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Nobody defines struct mdio_gpio_platform_data. Remove platform data
support from mdio-gpio and drop the header.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260316-gpio-mdio-hdr-cleanup-v1-2-2df696f74728@oss.qualcomm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The three defines from the linux/mdio-gpio.h header are only used in the
mdio-gpio module. There's no reason to have them in a public header.
Move them into the driver and remove mdio-gpio.h.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260316-gpio-mdio-hdr-cleanup-v1-1-2df696f74728@oss.qualcomm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When CONFIG_IPV6 is disabled, the udp_sock_create6() function returns 0
(success) without actually creating a socket. Callers such as
fou_create() then proceed to dereference the uninitialized socket
pointer, resulting in a NULL pointer dereference.
The captured NULL deref crash:
BUG: kernel NULL pointer dereference, address: 0000000000000018
RIP: 0010:fou_nl_add_doit (net/ipv4/fou_core.c:590 net/ipv4/fou_core.c:764)
[...]
Call Trace:
<TASK>
genl_family_rcv_msg_doit.constprop.0 (net/netlink/genetlink.c:1114)
genl_rcv_msg (net/netlink/genetlink.c:1194 net/netlink/genetlink.c:1209)
[...]
netlink_rcv_skb (net/netlink/af_netlink.c:2550)
genl_rcv (net/netlink/genetlink.c:1219)
netlink_unicast (net/netlink/af_netlink.c:1319 net/netlink/af_netlink.c:1344)
netlink_sendmsg (net/netlink/af_netlink.c:1894)
__sock_sendmsg (net/socket.c:727 (discriminator 1) net/socket.c:742 (discriminator 1))
__sys_sendto (./include/linux/file.h:62 (discriminator 1) ./include/linux/file.h:83 (discriminator 1) net/socket.c:2183 (discriminator 1))
__x64_sys_sendto (net/socket.c:2213 (discriminator 1) net/socket.c:2209 (discriminator 1) net/socket.c:2209 (discriminator 1))
do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1))
entry_SYSCALL_64_after_hwframe (net/arch/x86/entry/entry_64.S:130)
This patch makes udp_sock_create6 return -EPFNOSUPPORT instead, so
callers correctly take their error paths. There is only one caller of
the vulnerable function and only privileged users can trigger it.
Fixes: fd384412e199b ("udp_tunnel: Seperate ipv6 functions into its own file.")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Link: https://patch.msgid.link/20260317010241.1893893-1-xmei5@asu.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
lib/bootconfig.c:136:21: warning: conversion from 'long int' to
'int' may change value [-Wconversion]
lib/bootconfig.c:308:33: warning: conversion from 'int' to 'uint16_t'
may change value [-Wconversion]
lib/bootconfig.c:467:37: warning: conversion from 'int' to 'uint16_t'
may change value [-Wconversion]
lib/bootconfig.c:469:40: warning: conversion from 'int' to 'uint16_t'
may change value [-Wconversion]
lib/bootconfig.c:472:54: warning: conversion from 'int' to 'uint16_t'
may change value [-Wconversion]
lib/bootconfig.c:476:45: warning: conversion from 'int' to 'uint16_t'
may change value [-Wconversion]
xbc_node_index() returns the position of a node in the xbc_nodes array,
which has at most XBC_NODE_MAX (8192) entries, well within uint16_t
range. Every caller stores the result in a uint16_t field (node->parent,
node->child, node->next, or the keys[] array in compose_key_after), so
the int return type causes narrowing warnings at all six call sites.
Change the return type to uint16_t and add an explicit cast on the
pointer subtraction to match the storage width and eliminate the
warnings.
Link: https://lore.kernel.org/all/20260318155919.78168-14-objecting@objecting.org/
Signed-off-by: Josh Law <objecting@objecting.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
xbc_calc_checksum() only reads the data buffer, so mark the parameter
as const void * and the internal pointer as const unsigned char *.
Link: https://lore.kernel.org/all/20260318155919.78168-7-objecting@objecting.org/
Signed-off-by: Josh Law <objecting@objecting.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
The external function declarations do not need the "extern" keyword. Remove
it to align with the Linux kernel coding style and to silence the
associated checkpatch warnings.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
|
|
* Use the preferred `unsigned int` over plain `unsigned` for the `num`
parameter.
* Synchronize the parameter names in moduleparam.h with the ones used by
the implementation in params.c.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
|
|
When setting a charp module parameter, the param_set_charp() function
allocates memory to store a copy of the input value. Later, when the module
is potentially unloaded, the destroy_params() function is called to free
this allocated memory.
However, destroy_params() is available only when CONFIG_SYSFS=y, otherwise
only a dummy variant is present. In the unlikely case that the kernel is
configured with CONFIG_MODULES=y and CONFIG_SYSFS=n, this results in
a memory leak of charp values when a module is unloaded.
Fix this issue by making destroy_params() always available when
CONFIG_MODULES=y. Rename the function to module_destroy_params() to clarify
that it is intended for use by the module loader.
Fixes: e180a6b7759a ("param: fix charp parameters set via sysfs")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
|
|
The switch to cpumask_nth() over cpumask_weight(), as it may return
earlier - as soon as the function counts the required number of CPUs.
Signed-off-by: Yury Norov <ynorov@nvidia.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Zhongqiu Han <zhongqiu.han@oss.qualcomm.com>
Link: https://patch.msgid.link/20260314192544.605914-1-ynorov@nvidia.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The A733 PCK600, similar to A523 PCK600, is likely a customized version
of ARM PCK-600 power controller. They share the same BSP drivers in the
package provided by Radxa, with the only difference being the lack of
resets.
Therefore, document A733 compatible and make resets required only for
the other models, as well as prepare the PD definitions for future
device trees.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Yuanshen Cao <alex.caoys@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add support to enable TCPM to negotiate with
USB PD Standard Power Range Adjustable Voltage Supply (SPR AVS) when
acting as a power sink.
* Added support to the tcpm power supply properties, allowing userspace
to enable and control the dynamic limits (voltage and current)
specific to the SPR AVS contract.
* Implemented tcpm_pd_select_spr_avs_apdo() to select the appropriate
APDO and validate the requested voltage/current against both the
Source and Sink capabilities.
* Implemented tcpm_pd_build_spr_avs_request() to construct the
Request Data Object (RDO) for SPR AVS.
* Added SNK_NEGOTIATE_SPR_AVS_CAPABILITIES state to the state machine to
handle negotiation for SPR AVS.
* Updated the SNK_TRANSITION_SINK state to implement the SPR
AVS-specific VBUS transition rules, including reducing current draw to
PD_I_SNK_STBY_MA for large voltage changes, as required by USB PD spec.
Log stub captured when enabling AVS:
$ echo 3 > /sys/class/power_supply/tcpm-source-psy-1-0025/online
$ cat /d/usb/tcpm-1-0025/log
[ 358.895775] request to set AVS online
[ 358.895792] AMS POWER_NEGOTIATION start
[ 358.895806] state change SNK_READY -> AMS_START [rev3 POWER_NEGOTIATION]
[ 358.895850] state change AMS_START -> SNK_NEGOTIATE_SPR_AVS_CAPABILITIES [rev3 POWER_NEGOTIATION]
[ 358.895866] SPR AVS src_pdo_index:4 snk_pdo_index:2 req_op_curr_ma roundup:2200 req_out_volt_mv roundup:9000
[ 358.895880] Requesting APDO SPR AVS 4: 9000 mV, 2200 mA
[ 358.896405] set_auto_vbus_discharge_threshold mode:0 pps_active:n vbus:0 pps_apdo_min_volt:0 ret:0
[ 358.896422] PD TX, header: 0x1a82
[ 358.900158] PD TX complete, status: 0
[ 358.900205] pending state change SNK_NEGOTIATE_SPR_AVS_CAPABILITIES -> HARD_RESET_SEND @ 60 ms [rev3 POWER_NEGOTIATION]
[ 358.904832] PD RX, header: 0x1a3 [1]
[ 358.904854] state change SNK_NEGOTIATE_SPR_AVS_CAPABILITIES -> SNK_TRANSITION_SINK [rev3 POWER_NEGOTIATION]
[ 358.904888] pending state change SNK_TRANSITION_SINK -> HARD_RESET_SEND @ 700 ms [rev3 POWER_NEGOTIATION]
[ 359.021530] PD RX, header: 0x3a6 [1]
[ 359.021546] Setting voltage/current limit 9000 mV 2200 mA
[ 359.023035] set_auto_vbus_discharge_threshold mode:3 pps_active:n vbus:9000 pps_apdo_min_volt:0 ret:0
[ 359.023053] state change SNK_TRANSITION_SINK -> SNK_READY [rev3 POWER_NEGOTIATION]
[ 359.023090] AMS POWER_NEGOTIATION finished
$ cat /sys/class/power_supply/tcpm-source-psy-1-0025/online
3
Log stub captured when increasing voltage:
$ echo 9100000 > /sys/class/power_supply/tcpm-source-psy-1-0025/voltage_now
$ cat /d/usb/tcpm-1-0025/log
[ 632.116714] AMS POWER_NEGOTIATION start
[ 632.116728] state change SNK_READY -> AMS_START [rev3 POWER_NEGOTIATION]
[ 632.116779] state change AMS_START -> SNK_NEGOTIATE_SPR_AVS_CAPABILITIES [rev3 POWER_NEGOTIATION]
[ 632.116798] SPR AVS src_pdo_index:4 snk_pdo_index:2 req_op_curr_ma roundup:2200 req_out_volt_mv roundup:9100
[ 632.116811] Requesting APDO SPR AVS 4: 9100 mV, 2200 mA
[ 632.117315] set_auto_vbus_discharge_threshold mode:0 pps_active:n vbus:0 pps_apdo_min_volt:0 ret:0
[ 632.117328] PD TX, header: 0x1c82
[ 632.121007] PD TX complete, status: 0
[ 632.121052] pending state change SNK_NEGOTIATE_SPR_AVS_CAPABILITIES -> HARD_RESET_SEND @ 60 ms [rev3 POWER_NEGOTIATION]
[ 632.124572] PD RX, header: 0x5a3 [1]
[ 632.124594] state change SNK_NEGOTIATE_SPR_AVS_CAPABILITIES -> SNK_TRANSITION_SINK [rev3 POWER_NEGOTIATION]
[ 632.124623] pending state change SNK_TRANSITION_SINK -> HARD_RESET_SEND @ 700 ms [rev3 POWER_NEGOTIATION]
[ 632.149256] PD RX, header: 0x7a6 [1]
[ 632.149271] Setting voltage/current limit 9100 mV 2200 mA
[ 632.150770] set_auto_vbus_discharge_threshold mode:3 pps_active:n vbus:9100 pps_apdo_min_volt:0 ret:0
[ 632.150787] state change SNK_TRANSITION_SINK -> SNK_READY [rev3 POWER_NEGOTIATION]
[ 632.150823] AMS POWER_NEGOTIATION finished
$ cat /sys/class/power_supply/tcpm-source-psy-1-0025/voltage_now
9100000
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: Amit Sunil Dhamne <amitsd@google.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260316150301.3892223-4-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add two new members to the power_supply_usb_type to represent the
USB Power Delivery (PD) Standard Power Range (SPR) Adjustable Voltage
Supply (AVS) charging types:
POWER_SUPPLY_USB_TYPE_PD_SPR_AVS: For devices supporting only the
PD SPR AVS type.
POWER_SUPPLY_USB_TYPE_PD_PPS_SPR_AVS: For devices that support both
PD Programmable Power Supply (PPS) and PD SPR AVS.
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://patch.msgid.link/20260316150301.3892223-3-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
USB Power Delivery 3.2 introduces a new power supply type SPR AVS.
Add macro definitions for the USB Power Delivery (PD)
Standard Power Range (SPR) Adjustable Voltage Supply (AVS) as a
Sink Augmented Power Data Object (APDO) in the device tree bindings.
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260316150301.3892223-2-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The fields 'priority' and 'mode_selection' in struct typec_altmode are
missing from the kernel-doc comment, which results in warnings when
building the documentation with 'make htmldocs'.
WARNING: ./include/linux/usb/typec_altmode.h:44 struct member 'priority' not described in 'typec_altmode'
WARNING: ./include/linux/usb/typec_altmode.h:44 struct member 'mode_selection' not described in 'typec_altmode'
Document both fields to keep the kernel-doc comment aligned with the
structure definition.
Signed-off-by: Aldo Conte <aldocontelk@gmail.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260311163320.61534-1-aldocontelk@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Some display controllers can be hardware programmed to show non-black
colors for pixels that are either not covered by any plane or are
exposed through transparent regions of higher planes. This feature can
help reduce memory bandwidth usage, e.g. in compositors managing a UI
with a solid background color while using smaller planes to render the
remaining content.
To support this capability, introduce the BACKGROUND_COLOR standard DRM
mode property, which can be attached to a CRTC through the
drm_crtc_attach_background_color_property() helper function.
Additionally, define a 64-bit ARGB format value to be built with the
help of a couple of dedicated DRM_ARGB64_PREP*() helpers. Individual
color components can be extracted with desired precision using the
corresponding DRM_ARGB64_GET*() macros.
Co-developed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Diederik de Haas <diederik@cknow-tech.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20260303-rk3588-bgcolor-v8-2-fee377037ad1@collabora.com
Signed-off-by: Daniel Stone <daniels@collabora.com>
|
|
Currently DIV_ROUND_CLOSEST() is only available for the kernel via
include/linux/math.h.
Expose it to userland as well by adding __KERNEL_DIV_ROUND_CLOSEST() as
a common definition in uapi.
Additionally, ensure it allows building ISO C applications by switching
from the 'typeof' GNU extension to the ISO-friendly __typeof__.
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Diederik de Haas <diederik@cknow-tech.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20260303-rk3588-bgcolor-v8-1-fee377037ad1@collabora.com
Signed-off-by: Daniel Stone <daniels@collabora.com>
|
|
AMD MDB IP supports Linked List (LL) mode as well as non-LL mode.
The current code does not have the mechanisms to enable the
DMA transactions using the non-LL mode. The following two cases
are added with this patch:
- For the AMD (Xilinx) only, when a valid physical base address of
the device side DDR is not configured, then the IP can still be
used in non-LL mode. For all the channels DMA transactions will
be using the non-LL mode only. This, the default non-LL mode,
is not applicable for Synopsys IP with the current code addition.
- If the default mode is LL-mode, for both AMD (Xilinx) and Synosys,
and if user wants to use non-LL mode then user can do so via
configuring the peripheral_config param of dma_slave_config.
Signed-off-by: Devendra K Verma <devendra.verma@amd.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260318070403.1634706-3-devendra.verma@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
ieee80211_tx_prepare_skb() has three error paths, but only two of them
free the skb. The first error path (ieee80211_tx_prepare() returning
TX_DROP) does not free it, while invoke_tx_handlers() failure and the
fragmentation check both do.
Add kfree_skb() to the first error path so all three are consistent,
and remove the now-redundant frees in callers (ath9k, mt76,
mac80211_hwsim) to avoid double-free.
Document the skb ownership guarantee in the function's kdoc.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://patch.msgid.link/20260314065455.2462900-1-nbd@nbd.name
Fixes: 06be6b149f7e ("mac80211: add ieee80211_tx_prepare_skb() helper function")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
em_cpu_energy() is part of the EAS (Fair) task wakeup path. Now that
rcu_read_{,un}lock() have been removed from find_energy_efficient_cpu()
switch to rcu_dereference_all() and check for rcu_read_lock_any_held()
in em_cpu_energy() as well.
In EAS (Fair) task wakeup path is a preempt/IRQ disabled region, so
rcu_read_{,un}lock() can be removed.
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://patch.msgid.link/5b1228b7-5949-4a45-9f62-e8ce936de694@arm.com
|
|
Now that "sd->shared" assignments are using the sched_domain_shared
objects allocated with s_data, remove the sd_data based allocations.
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://patch.msgid.link/20260312044434.1974-6-kprateek.nayak@amd.com
|
|
bio_alloc_bioset tries non-waiting slab allocations first for the bio and
bvec array, but does so in a somewhat convoluted way.
Restructure the function so that it first open codes these slab
allocations, and then falls back to the mempools with the original
gfp mask.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> -ck
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://patch.msgid.link/20260316161144.1607877-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ppp_dev_name() holds the RCU read lock internally to protect pch->ppp.
However, as it returns netdev->name to the caller, the caller should
also hold either RCU or RTNL lock to prevent the netdev from being
freed.
The only two references of the function is in the L2TP driver, both of
which already hold RCU. So remove the internal RCU lock and document
that callers must hold RCU.
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260316092824.479149-1-dqfext@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
Sascha Bischoff
Yang Xiuwei
Eric Biggers
Rafael J. Wysocki
Thierry Reding
Lucas Zampieri
Paolo Abeni
Lukasz Majewski
Eric Woudstra
Thomas Hellström
Svyatoslav Ryhel
Shardul Bankar
Haiyang Zhang
Jakub Kicinski
Val Packett
Bjorn Andersson
Kathiravan Thirumoorthy
Bartosz Golaszewski
Xiang Mei
Josh Law
Petr Pavlu
Yury Norov
Yuanshen Cao
Badhri Jagan Sridharan
Aldo Conte
Cristian Ciocaltea
Devendra K Verma
Felix Fietkau
Dietmar Eggemann
K Prateek Nayak
Christoph Hellwig
Qingfang Deng