| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Vaio RPL is equipped with ACL256, and needs a
fix to make the internal mic and headphone mic to work.
Also must to limits the internal microphone boost.
Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
Link: https://patch.msgid.link/20251029181152.389302-1-edson.drosdeck@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The quirk for Victus 15-fa1xxx wasn't working on Victus 15-fa1031nt due to a different board id. This patch enables the existing quirk for the board id 8BC8.
Tested on HP Victus 15-fa1031nt (MB 8C2D). The LED behaviour works as intended.
Signed-off-by: Eren Demir <eren.demir2479090@gmail.com>
Link: https://patch.msgid.link/20251027110208.6481-1-eren.demir2479090@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This laptop requires the same quirk as Lenovo Yoga9 14IAP7 for
fixing the bass speaker problems.
Use HDA_CODEC_QUIRK to match on the codec SSID to avoid conflict with
the Lenovo Legion Slim 7 16IRH8, which has the same PCI SSID.
Signed-off-by: J-Donald Tournier <jdtournier@gmail.com>
Link: https://patch.msgid.link/20251018145322.39119-1-jdournier@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This laptop uses the ALC285 codec, fixed by enabling
the ALC285_FIXUP_HP_MUTE_LED quirk
Signed-off-by: Dawn Gardner <dawn.auroali@gmail.com>
Link: https://patch.msgid.link/20251016184218.31508-3-dawn.auroali@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
ASoC: Fixes for v6.18
A moderately large collection of driver specific fixes, plus a few new
quirks and device IDs. The NAU8821 changes are a little large but more
in mechanical ways than in ways that are complex.
|
|
The software reset for TAS5825 is different form other chips, as it will
set as 0x11 instead of 0x1 during reset in the tasdevice_reset(). So set
tas2781_hda::tasdevice_priv::chip_id as TAS5825, tasdevice_reset() can
work correctly.
Fixes: 7ceb69ca82b1 ("ASoC: tas2781: Add tas2118, tas2x20, tas5825 support")
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
HP ZBook 17 G6 with SSID 103c:860c requires a similar workaround as
its 15-inch model in order to make the speaker and mute LED working.
Add the corresponding quirk entry to address it.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220372
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The __component_match_add function may assign the 'matchptr' pointer
the value ERR_PTR(-ENOMEM), which will subsequently be dereferenced.
The call stack leading to the error looks like this:
hda_component_manager_init
|-> component_match_add
|-> component_match_add_release
|-> __component_match_add ( ... ,**matchptr, ... )
|-> *matchptr = ERR_PTR(-ENOMEM); // assign
|-> component_master_add_with_match( ... match)
|-> component_match_realloc(match, match->num); // dereference
Add IS_ERR() check to prevent the crash.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: ae7abe36e352 ("ALSA: hda/realtek: Add CS35L41 support for Thinkpad laptops")
Cc: stable@vger.kernel.org
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Return value of a function acpi_evaluate_dsm() is dereferenced without
checking for NULL, but it is usually checked for this function.
acpi_evaluate_dsm() may return NULL, when acpi_evaluate_object() returns
acpi_status other than ACPI_SUCCESS, so add a check to prevent the crach.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 447106e92a0c ("ALSA: hda: cs35l41: Support mute notifications for CS35L41 HDA")
Cc: stable@vger.kernel.org
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Pull sound fixes from Takashi Iwai:
"A few more small fixes for 6.18-rc1.
Most of changes are about ASoC Intel and SOF drivers, while a few
other device-specific fixes are found for HD-audio, USB-audio, ASoC
RT722VB and Meson"
* tag 'sound-fix-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: rt722: add settings for rt722VB
ASoC: meson: aiu-encoder-i2s: fix bit clock polarity
ALSA: usb: fpc: replace kmalloc_array followed by copy_from_user with memdup_array_user
ALSA: hda/tas2781: Enable init_profile_id for device initialization
ALSA: emu10k1: Fix typo in docs
ALSA: hda/realtek: Add quirk for ASUS ROG Zephyrus Duo
ASoC: SOF: Intel: Read the LLP via the associated Link DMA channel
ASoC: SOF: ipc4-pcm: do not report invalid delay values
ASoC: SOF: sof-audio: add dev_dbg_ratelimited wrapper
ASoC: SOF: Intel: hda-pcm: Place the constraint on period time instead of buffer time
ASoC: SOF: ipc4-topology: Account for different ChainDMA host buffer size
ASoC: SOF: ipc4-topology: Correct the minimum host DMA buffer size
ASoC: SOF: ipc4-pcm: fix start offset calculation for chain DMA
ASoC: SOF: ipc4-pcm: fix delay calculation when DSP resamples
ASoC: SOF: ipc3-topology: Fix multi-core and static pipelines tear down
ALSA: hda/hdmi: Add pin fix for HP ProDesk model
|
|
Optimize the time consumption of profile switching, init_profile saves
the common settings of different profiles, such as the dsp coefficients,
etc, which can greatly reduce the profile switching time comsumption and
remove the repetitive settings.
Fixes: e83dcd139e77 ("ASoC: tas2781: Add keyword "init" in profile section")
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The ASUS ROG Zephyrus Duo 15 SE (GX551QS) with ALC 289 codec requires specific
pin configuration for proper volume control. Without this quirk, volume
adjustments produce a muffled sound effect as only certain channels attenuate,
leaving bass frequency at full volume.
Testing with hdajackretask confirms these pin tweaks fix the issue:
- Pin 0x17: Internal Speaker (LFE)
- Pin 0x1e: Internal Speaker
Signed-off-by: Adam Holliday <dochollidayxx@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Pull sound updates from Takashi Iwai:
"It's been relatively calm in this cycle from the feature POV, but
there were lots of cleanup works in the wide-range of code for
converting with the auto-cleanup macros like guard().
The mostly user-visible changes are the support of a couple of new
compress-offload API extensions, and the support of new ASoC codec /
platform drivers as well as USB-audio quirks.
Here we go with some highlights:
Core:
- Compress-offload API extension for 64bit timestamp support
- Compress-offload API extension for OPUS codec support
- Workaround for PCM locking issue with PREEMPT_RT and softirq
- KCSAN warning fix for ALSA sequencer core
ASoC:
- Continued cleanup works for ASoC core APIs
- Lots of cleanups and conversions of DT bindings
- Substantial maintainance work on the Intel AVS drivers
- Support for Qualcomm Glymur and PM4125, Realtek RT1321, Shanghai
FourSemi FS2104/5S, Texas Instruments PCM1754 and TAS2783A
- Remove support for TI WL1273 for old Nokia systems
USB-audio:
- Support for Tascam US-144mkII, Presonus S1824c support
- More flexible quirk option handling
- Fix for USB MIDI timer bug triggered by fuzzer
Others:
- A large series of cleanups with guard() & co macros over (non-ASoC)
sound drivers (PCI, ISA, HD-audio, USB-audio, drivers, etc)
- TAS5825 HD-audio side-codec support"
* tag 'sound-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (454 commits)
ALSA: usb-audio: don't hardcode gain for output channel of Presonus Studio
ALSA: usb-audio: add the initial mix for Presonus Studio 1824c
ALSA: doc: improved docs about quirk_flags in snd-usb-audio
ALSA: usb-audio: make param quirk_flags change-able in runtime
ALSA: usb-audio: improve module param quirk_flags
ALSA: usb-audio: add two-way convert between name and bit for QUIRK_FLAG_*
ALSA: usb-audio: fix race condition to UAF in snd_usbmidi_free
ALSA: usb-audio: add mono main switch to Presonus S1824c
ALSA: compress: document 'chan_map' member in snd_dec_opus
ASoC: cs35l56: Add support for CS35L56 B2 silicon
ASoC: cs35l56: Set fw_regs table after getting REVID
ALSA: hda/realtek: Add quirk for HP Spectre 14t-ea100
ASoc: tas2783A: Fix an error code in probe()
ASoC: tlv320aic3x: Fix class-D initialization for tlv320aic3007
ASoC: qcom: sc8280xp: use sa8775p/ subdir for QCS9100 / QCS9075
ASoC: stm32: sai: manage context in set_sysclk callback
ASoC: renesas: msiof: ignore 1st FSERR
ASoC: renesas: msiof: Add note for The possibility of R/L opposite Capture
ASoC: renesas: msiof: setup both (Playback/Capture) in the same time
ASoC: renesas: msiof: tidyup DMAC stop timing
...
|
|
Pull pin control updates from Linus Walleij:
"We have GPIO awareness in the pin control core and an interesting
AAEON driver.
Core changes:
- Allow pins to be identified/marked as GPIO mode with a special
callback.
The pin controller core is now "aware" if a pin is in GPIO mode if
the callback is implemented in the driver, and can thus be marked
as "strict", i.e. disallowing simultaneous use of a line as GPIO
and another function such as I2C.
This is enabled in the Qualcomm TLMM driver and also implemeted
from day 1 in the new Broadcom STB driver
- Rename the pin config option PIN_CONFIG_OUTPUT to PIN_CONFIG_LEVEL
to better describe what the config is doing, as well as making it
more intuitive what shall be returned when reading this property
New drivers:
- Qualcomm SDM660 LPASS LPI TLMM pin controller subdriver
- Qualcomm Glymur family pin controller driver
- Broadcom STB family pin controller driver
- Tegra186 pin controller driver
- AAEON UP pin controller support.
This is some special pin controller that works as an external
advanced line MUX and amplifier for signals from an Intel SoC. A
cooperative effort with the GPIO maintainer was needed to reach a
solution where we reuse code from the GPIO aggregator/forwarder
driver
- Renesas RZ/T2H and RZ/N2H pin controller support
- Axis ARTPEC-8 subdriver for the Samsung pin controller driver
Improvements:
- Output enable (OEN) support in the Renesas RZG2L driver
- Properly support bias pull up/down in the pinctrl-single driver
- Move over all GPIO portions using generic MMIO GPIO to the new
generic GPIO chip management which has a nice and separate API
- Proper DT bindings for some older Broadcom SoCs
- External GPIO (EGPIO) support in the Qualcomm SM8250
Deleted code:
- Dropped the now unused Samsung S3C24xx drivers"
* tag 'pinctrl-v6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (75 commits)
pinctrl: use more common syntax for compound literals
pinctrl: Simplify printks with pOF format
pinctrl: qcom: Add SDM660 LPASS LPI TLMM
dt-bindings: pinctrl: qcom: Add SDM660 LPI pinctrl
pinctrl: qcom: lpass-lpi: Add ability to use custom pin offsets
pinctrl: qcom: Add glymur pinctrl driver
dt-bindings: pinctrl: qcom: Add Glymur pinctrl
pinctrl: qcom: sm8250: Add egpio support
pinctrl: generic: rename PIN_CONFIG_OUTPUT to LEVEL
pinctrl: keembay: fix double free in keembay_build_functions()
pinctrl: spacemit: fix typo in PRI_TDI pin name
pinctrl: eswin: Fix regulator error check and Kconfig dependency
pinctrl: bcm: Add STB family pin controller driver
dt-bindings: pinctrl: Add support for Broadcom STB pin controller
pinctrl: qcom: make the pinmuxing strict
pinctrl: qcom: mark the `gpio` and `egpio` pins function as non-strict functions
pinctrl: qcom: add infrastructure for marking pin functions as GPIOs
pinctrl: allow to mark pin functions as requestable GPIOs
pinctrl: qcom: use generic pin function helpers
pinctrl: make struct pinfunction a pointer in struct function_desc
...
|
|
The HP ProDesk 400 (SSID 103c:83f3) also needs a quirk for
enabling HDMI outputs. This patch adds the required quirk
entry.
Signed-off-by: Steven 'Steve' Kendall <skend@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Pull 6.17-devel branch for applying further changes cleanly.
Signed-off-by: Taksahi Iwai <tiwai@suse.de>
|
|
Defer setting the cs35l56_base.fw_regs pointer until after the REVID has
been read in cs35l56_hw_init(). Also make the corresponding change to the
cs35l56_hda drivers to prevent a build break.
This is preparing for firmware registers that change address between
revisions of the same device.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
HP-Spectre 14t-ea100 model has no speaker output unless booting
previously from Windows on dual boot, a reboot while on Linux will
stop the speakers working. Applying the existing quirk for HP Spectre
X360 EU0xxx seems fixing this speaker problem.
Reported-by: Kaden Berger <kadenb816@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/aMxdGAmfOQ6VPNU8@archlinux
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
ASoC: Updates for v6.18
A relatively quiet release for ASoC, we've had a lot of maintainance
work going on and several new drivers but really the most remarkable
thing is that we removed a driver, the WL1273 driver used in some old
Nokia systems that have had the underlying system support removed from
the kernel.
- Morimoto-san continues his work on cleanups of the core APIs and
enforcement of abstraction layers.
- Lots of cleanups and conversions of DT bindings.
- Substantial maintainance work on the Intel AVS drivers.
- Support for Qualcomm Glymur and PM4125, Realtek RT1321, Shanghai
FourSemi FS2104/5S, Texas Instruments PCM1754.
- Remove support for TI WL1273.
|
|
This laptop uses the ALC236 codec with COEF 0x7 and idx 1 to
control the mute LED. Enable the existing quirk for this device.
Signed-off-by: Praful Adiga <praful.adiga@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The issue was caused by incorrect configuration in the driver,
which prevented proper volume control on certain systems.
Signed-off-by: Bou-Saan Che <yungmeat@inboxia.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The laptop does not contain valid _DSD for these amps, so requires
entries into the CS35L41 configuration table to function correctly.
Signed-off-by: Bou-Saan Che <yungmeat@inboxia.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This laptop does not contain _DSD so needs to be supported using the
configuration table.
Signed-off-by: Bou-Saan Che <yungmeat@inboxia.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This patch adds a new fixup for the ALC295 codec on some Dell
laptops that use the TAS2781 I2C amplifier.
The fixup correctly initializes the amplifier and pins, allowing
sound to work on all speakers of these devices.
The fixup chain is added to the relevant quirk entries for
Dell Polaris models.
[ adjusted for 6.17 kernel code by tiwai ]
Fixes: 1e9c708dc3ae ("ALSA: hda/tas2781: Add new quirk for Lenovo, ASUS, Dell projects")
Link: https://bugzilla.suse.com/show_bug.cgi?id=1249575
Signed-off-by: Donald Menig <djmenig@outlook.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
A a potential race condition reported by one of my customers that leads to
a NULL pointer dereference, where the call to efi.get_variable should be
guarded with efi_rt_services_supported() to ensure that function exists.
Fixes: 4fe238513407 ("ALSA: hda/tas2781: Move and unified the calibrated-data getting function for SPI and I2C into the tas2781_hda lib")
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This generic pin config property is confusingly named so let's
rename it to make things clearer.
There are already drivers in the tree that use PIN_CONFIG_OUTPUT
to *read* the value of an output driven pin, which is a big
semantic confusion for the head: are we then reading the
setting of the output or the actual value/level that is put
out on the pin?
We already have PIN_CONFIG_OUTPUT_ENABLE that turns on driver
buffers for output, so this can by logical conclusion only
drive the voltage level if it should be any different.
But if we read the pin, are we then reading the *setting* of
the output value or the *actual* value we can see on the
line?
If the pin has not first been set into output mode with
PIN_CONFIG_OUTPUT_ENABLE, but is instead in some input mode
or tristate, what will reading this property actually
return?
Reading the current users reading this property it is clear
that what we read is the logical level of the pin as 0 or 1
depending on if it is low or high.
Rename it to PIN_CONFIG_LEVEL so it is crystal clear that
we set or read the voltage level of the pin and nothing else.
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
A bug reported by one of my customers that the order of TAS2781
calibrated-data is incorrect, the correct way is to move R0_Low
and insert it between R0 and InvR0.
Fixes: 4fe238513407 ("ALSA: hda/tas2781: Move and unified the calibrated-data getting function for SPI and I2C into the tas2781_hda lib")
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20250907222728.988-1-shenghao-ding@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
s/OPLC/OLPC/
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20250902154858.86102-2-thorsten.blum@linux.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Use the given macro for determining the resume state instead of
referring to the raw value.
Only a cleanup for now. The infrastructure might be changed in
future, though.
Link: https://patch.msgid.link/20250902095636.21462-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
It was reported that HP EliteDesk 800 G4 DM 65W (SSID 103c:845a) needs
the similar quirk for enabling HDMI outputs, too. This patch adds the
corresponding quirk entry.
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250901115009.27498-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Pull 6.17 devel branch for further auto-cleanup updates.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The tasdev_load_calibrated_data() function expects the calibration data
values in the cali_data buffer as R0, R0Low, InvR0, Power, TLim which
is not the same as what tas2563_save_calibration() writes to the buffer.
Reorder the EFI variables in the tas2563_save_calibration() function
to put the values in the buffer in the correct order.
Fixes: 4fe238513407 ("ALSA: hda/tas2781: Move and unified the calibrated-data getting function for SPI and I2C into the tas2781_hda lib")
Cc: <stable@vger.kernel.org>
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://patch.msgid.link/20250829160450.66623-2-soyer@irl.hu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Before conversion to unify the calibration data management, the
tas2563_apply_calib() function performed the big endian conversion and
wrote the calibration data to the device. The writing is now done by the
common tasdev_load_calibrated_data() function, but without conversion.
Put the values into the calibration data buffer with the expected
endianness.
Fixes: 4fe238513407 ("ALSA: hda/tas2781: Move and unified the calibrated-data getting function for SPI and I2C into the tas2781_hda lib")
Cc: <stable@vger.kernel.org>
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://patch.msgid.link/20250829160450.66623-1-soyer@irl.hu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The release of temporary kmalloced buffers can be nicely handled via
the standard __free(kfree).
Only code refactoring, and no behavior change.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250827072916.31933-22-tiwai@suse.de
|
|
The release of temporary kmalloced buffers can be nicely handled via
the standard __free(kfree).
Only code refactoring, and no behavior change.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250827072916.31933-21-tiwai@suse.de
|
|
Replace the manual mutex lock/unlock pairs with guard().
Only code refactoring, and no behavior change.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250827072916.31933-18-tiwai@suse.de
|
|
Replace the manual mutex lock/unlock pairs with guard().
Only code refactoring, and no behavior change.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250827072916.31933-17-tiwai@suse.de
|
|
Replace the manual mutex lock/unlock pairs with guard().
Only code refactoring, and no behavior change.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250827072916.31933-16-tiwai@suse.de
|
|
Replace the manual mutex lock/unlock pairs with guard().
Only code refactoring, and no behavior change.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250827072916.31933-15-tiwai@suse.de
|
|
Replace the manual mutex lock/unlock pairs with guard().
Only code refactoring, and no behavior change.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250827072916.31933-14-tiwai@suse.de
|
|
Replace the manual mutex lock/unlock pairs with guard().
Only code refactoring, and no behavior change.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250827072916.31933-13-tiwai@suse.de
|
|
Replace the manual mutex lock/unlock pairs with guard().
Also, introduce the guard() for coef_mutex_lock() and _unlock() pairs,
and replace accordingly, too. The coef_mutex_lock() and *_unlock()
are moved to readtek.h as static inline functions along with it.
Only code refactoring, and no behavior change.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250827072916.31933-12-tiwai@suse.de
|
|
Replace the manual mutex lock/unlock pairs with guard().
Only code refactoring, and no behavior change.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250827072916.31933-11-tiwai@suse.de
|
|
Replace the manual mutex lock/unlock pairs with guard().
Only code refactoring, and no behavior change.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250827072916.31933-10-tiwai@suse.de
|
|
The new macro CLASS(snd_hda_power_pm) can replace the manual
snd_hda_power_up_pm() and _down() calls gracefully.
Merely code cleanups and no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250827072916.31933-5-tiwai@suse.de
|
|
The new macro CLASS(snd_hda_power_pm) can replace the manual
snd_hda_power_up_pm() and _down() calls gracefully.
Merely code cleanups and no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250827072916.31933-4-tiwai@suse.de
|
|
The new macro CLASS(snd_hda_power) can replace the manual
snd_hda_power_up() and _down() calls as well as the *_pm_*() variants
gracefully.
Merely code cleanups and no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250827072916.31933-3-tiwai@suse.de
|
|
A bug reported by one of my customers that EFI name beginning with 0
instead of 1.
Fixes: 4fe238513407 ("ALSA: hda/tas2781: Move and unified the calibrated-data getting function for SPI and I2C into the tas2781_hda lib")
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20250827043404.644-1-shenghao-ding@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add a PCI quirk to enable microphone detection on the headphone jack of
TongFang X6AR5xxY and X6FR5xxY devices.
Signed-off-by: Aaron Erhardt <aer@tuxedocomputers.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250826141054.1201482-1-aer@tuxedocomputers.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Commit ad781b550f9a ("ALSA: hda/hdmi: Rewrite to new probe method")
rewrote the HDMI codec ID tables to a new format. In doing so, recently
added codec IDs from commit e0a911ac868 ("ALSA: hda: Add missing NVIDIA
HDA codec IDs") were dropped from the tables. These tables had recently
been split from the unified table that existed in patch_hdmi.c, and did
contain the entries in question after the split but before the codec ID
entries were rewritten to the new format.
Restore the missing codec ID entries to nvhdmi.c and tegrahdmi.c. There
do not appear to be any additional missing entries in any of the other
codec ID tables when compared to the patch_hdmi.c at the final revision
before the split.
Fixes: ad781b550f9a ("ALSA: hda/hdmi: Rewrite to new probe method")
Signed-off-by: Daniel Dadap <ddadap@nvidia.com>
Link: https://patch.msgid.link/aK0ghvagXy740rxd@ddadap-lakeline.nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
Edson Juliano Drosdeck
Eren Demir
J-Donald Tournier
Dawn Gardner
Takashi Iwai
Shenghao Ding
Denis Arefev
Linus Torvalds
Adam Holliday
Steven 'Steve' Kendall
Richard Fitzgerald
Praful Adiga
Bou-Saan Che
Donald Menig
Linus Walleij
Thorsten Blum
Gergo Koteles
Aaron Erhardt
Daniel Dadap