aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/sound/soc/codecs/wm8904.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2025-03-20ASoC: wm8904: Add DMIC and DRC supportMark Brown1-7/+310
Merge series from Francesco Dolcini <francesco@dolcini.it>: This patch series adds DMIC and DRC support to the WM8904 driver, a new of_ helper is added to simplify the driver code. DRC functionality is added in the same patch series to provide the necessary dynamic range control to make DMIC support useful. The WM8904 supports digital microphones on two of its inputs: IN1L/DMICDAT1 and IN1R/DMICDAT2. These two inputs can either be connected to an ADC or to the DMIC system. There is an ADC for each line, and only one DMIC block. This DMIC block is either connected to DMICDAT1 or to DMICDAT2. One DMIC data line supports two digital microphones via time multiplexing. The pin's functionality is decided during hardware design (IN1L vs DMICDAT1 and IN1R vs DMICDAT2). This is reflected in the Device Tree. If one line is analog and one is DMIC, we need to be able to switch between ADC and DMIC at runtime. The DMIC source is known from the Device Tree. If both are DMIC inputs, we need to be able to switch the DMIC source. There is no need to switch between ADC and DMIC at runtime. Therefore, kcontrols are dynamically added by the driver depending on its Device Tree configuration. This is a heavy rework of a previous patch series provided by Alifer Moraes and Pierluigi Passaro, https://lore.kernel.org/lkml/20220307141041.27538-1-alifer.m@variscite.com.
2025-03-20ASoC: wm8904: add DMIC supportErnest Van Hoecke1-5/+120
The WM8904 codec supports both ADC and DMIC inputs. Get input pin functionality from the platform data and add the necessary controls depending on the possible additional routing. The ADC and DMIC share the IN1L/DMICDAT1 and IN1R/DMICDAT2 pins. This leads to a few scenarios requiring different DAPM routing: - When both are connected to an analog input, only the ADC is used. - When one line is a DMIC and the other an analog input, the DMIC source is set from the platform data and a mux is added to select whether to use the ADC or DMIC. - When both are connected to a DMIC, another mux is added to this to select the DMIC source. Note that we still need to be able to select the ADC system for use with the IN2L, IN2R, IN3L and IN3R pins. Signed-off-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250319142059.46692-6-francesco@dolcini.it Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-20ASoC: wm8904: get platform data from DTErnest Van Hoecke1-1/+188
Read in optional codec-specific properties from the device tree. The platform_data structure is not populated when using device trees. This change parses optional dts properties to populate it. - wlf,in1l-as-dmicdat1 - wlf,in1r-as-dmicdat2 - wlf,gpio-cfg - wlf,micbias-cfg - wlf,drc-cfg-regs - wlf,drc-cfg-names - wlf,retune-mobile-cfg-regs - wlf,retune-mobile-cfg-names - wlf,retune-mobile-cfg-hz Datasheet: https://statics.cirrus.com/pubs/proDatasheet/WM8904_Rev4.1.pdf Signed-off-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250319142059.46692-5-francesco@dolcini.it Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-20ASoC: wm8904: Don't touch GPIO configs set to 0xFFFFErnest Van Hoecke1-1/+2
When updating the GPIO registers, do nothing for all fields of gpio_cfg that are "0xFFFF". This "do nothing" flag used to be 0 to easily check whether the gpio_cfg field was actually set inside pdata or left empty (default). However, 0 is a valid configuration for these registers, while 0xFFFF is not. With this change, users can explicitly set them to 0. Not setting gpio_cfg in the platform data will now lead to setting all GPIO registers to 0 instead of leaving them unset. No one is using this platform data with this codec. The change gets the driver ready to properly set gpio_cfg from the DT. Datasheet: https://statics.cirrus.com/pubs/proDatasheet/WM8904_Rev4.1.pdf Signed-off-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250319142059.46692-3-francesco@dolcini.it Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-03ASoC: codec: wm8904: use inclusive language for SND_SOC_DAIFMT_CBx_CFxKuninori Morimoto1-4/+4
In SND_SOC_DAIFMT_CBx_CFx, M/S are no longer used. use P/C. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://patch.msgid.link/8734g1cwti.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-12-09ASoC: wm8904: Remove use of i2c_match_id()Andrew Davis1-12/+1
The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by: Andrew Davis <afd@ti.com> Link: https://patch.msgid.link/20241203200001.197295-20-afd@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-15ASoC: codecs: wm8904: Fix Wvoid-pointer-to-enum-cast warningKrzysztof Kozlowski1-1/+1
'devtype' is an enum, thus cast of pointer on 64-bit compile test with W=1 causes: wm8904.c:2205:21: error: cast to smaller integer type 'enum wm8904_type' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230815143204.379708-2-krzysztof.kozlowski@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2023-07-30ASoC: Merge up fixes from Linus' treeMark Brown1-0/+3
Gets us pine64plus back if nothing else.
2023-07-24ASoC: wm8904: Fill the cache for WM8904_ADC_TEST_0 registerMark Brown1-0/+3
The WM8904_ADC_TEST_0 register is modified as part of updating the OSR controls but does not have a cache default, leading to errors when we try to modify these controls in cache only mode with no prior read: wm8904 3-001a: ASoC: error at snd_soc_component_update_bits on wm8904.3-001a for register: [0x000000c6] -16 Add a read of the register to probe() to fill the cache and avoid both the error messages and the misconfiguration of the chip which will result. Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230723-asoc-fix-wm8904-adc-test-read-v1-1-2cdf2edd83fd@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2023-07-18ASoC: wm8904: Update to use maple tree register cacheMark Brown1-1/+1
The maple tree register cache is based on a much more modern data structure than the rbtree cache and makes optimisation choices which are probably more appropriate for modern systems than those made by the rbtree cache. In v6.5 it has also acquired the ability to generate multi-register writes in sync operations, bringing performance up to parity with the rbtree cache there. Update the wm8904 driver to use the more modern data structure. Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20230713-asoc-cirrus-maple-v1-31-a62651831735@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2023-05-08ASoC: Switch i2c drivers back to use .probe()Uwe Kleine-König1-1/+1
After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert back to (the new) .probe() to be able to eventually drop .probe_new() from struct i2c_driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de Link: https://lore.kernel.org/r/20230425095716.331419-1-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org
2022-12-29ASoC: wm8904: fix wrong outputs volume after power reactivationEmanuele Ghidoli1-0/+7
Restore volume after charge pump and PGA activation to ensure that volume settings are correctly applied when re-enabling codec from SND_SOC_BIAS_OFF state. CLASS_W, CHARGE_PUMP and POWER_MANAGEMENT_2 register configuration affect how the volume register are applied and must be configured first. Fixes: a91eb199e4dc ("ASoC: Initial WM8904 CODEC driver") Link: https://lore.kernel.org/all/c7864c35-738c-a867-a6a6-ddf9f98df7e7@gmail.com/ Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20221223080247.7258-1-francesco@dolcini.it Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-27ASoC: wm*: Remove now redundant non_legacy_dai_naming flagCharles Keepax1-1/+0
The ASoC core has now been changed to default to the non-legacy DAI naming, as such drivers using the new scheme no longer need to specify the non_legacy_dai_naming flag. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220623125250.2355471-66-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-05ASoC: wm*: use i2c_match_id and simple i2c probeStephen Kitt1-3/+6
As part of the ongoing i2c transition to the simple probe ("probe_new"), this patch uses i2c_match_id to retrieve the driver_data for the probed device. The id parameter is thus no longer necessary and the simple probe can be used instead. Signed-off-by: Stephen Kitt <steve@sk2.org> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220325162515.1204107-1-steve@sk2.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-21ASoC: wm*: sync parameter naming (rate/sample_bits)Kuninori Morimoto1-1/+1
This patch syncs naming rule. - xxx_rates; + xxx_rate; - xxx_samplebits; + xxx_sample_bits; Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87czy6olh0.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-16ASoC: codecs: wm*: merge .digital_mute() into .mute_stream()Kuninori Morimoto1-2/+3
snd_soc_dai_digital_mute() is internally using both mute_stream() (1) or digital_mute() (2), but the difference between these 2 are only handling direction. We can merge digital_mute() into mute_stream int snd_soc_dai_digital_mute(xxx, int direction) { ... else if (dai->driver->ops->mute_stream) (1) return dai->driver->ops->mute_stream(xxx, direction); else if (direction == SNDRV_PCM_STREAM_PLAYBACK && dai->driver->ops->digital_mute) (2) return dai->driver->ops->digital_mute(xxx); ... } Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/87v9ixwiwr.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-09ASoC: codecs: Use fallthrough pseudo-keywordGustavo A. R. Silva1-2/+2
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20200709010359.GA18971@embeddedor Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-22ASoC: codecs: wm*: rename to snd_soc_component_read()Kuninori Morimoto1-8/+8
We need to use snd_soc_component_read() instead of snd_soc_component_read32() This patch renames _read32() to _read() Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87eeqf4mcl.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-12-17Merge tag 'asoc-fix-v5.5-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linusTakashi Iwai1-0/+6
ASoC: Fixes for v5.5 A collection of fixes since the merge window, mostly driver specific but there's a few in the core that clean up fallout from the refactorings done in the last cycle.
2019-11-27ASoC: wm8904: fix automatic sysclk configurationMichael Walle1-0/+6
The simple-card tries to signal the codec to disable rate constraints, see commit 2458adb8f92a ("SoC: simple-card-utils: set 0Hz to sysclk when shutdown"). This wasn't handled by the codec, instead it would set the FLL frequency to 0Hz which isn't working. Since we don't have any rate constraints just ignore this request. Fixes: 13409d27cb39 ("ASoC: wm8904: configure sysclk/FLL automatically") Signed-off-by: Michael Walle <michael@walle.cc> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20191122232532.22258-1-michael@walle.cc Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-22Merge branch 'asoc-5.5' into asoc-nextMark Brown1-28/+44
2019-11-15ASoC: wm8904: fix regcache handlingMichael Walle1-0/+1
The current code assumes that the power is turned off in SND_SOC_BIAS_OFF. If there are no actual regulator the codec isn't turned off and the registers are not reset to their default values but the regcache is still marked as dirty. Thus a value might not be written to the hardware if it is set to the default value. Do a software reset before turning off the power to make sure the registers are always reset to their default states. Signed-off-by: Michael Walle <michael@walle.cc> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20191112223629.21867-1-michael@walle.cc Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-11ASoC: wm8904: configure sysclk/FLL automaticallyMichael Walle1-28/+44
This adds a new mode WM8904_CLK_AUTO which automatically enables the FLL if a frequency different than the MCLK is set. These additions make the codec work with the simple-card driver in general and especially in systems where the MCLK doesn't match the required clock. Signed-off-by: Michael Walle <michael@walle.cc> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20191108203152.19098-1-michael@walle.cc Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-20ASoC: wm8904: implement input mode select as a muxMichał Mirosław1-19/+33
Make '* Capture Mode' a mux. This makes DAPM know that in single-ended mode only inverting mux paths need to be enabled. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/125cd3c9f298da9b08a4d6002d4c00d70a898950.1566298834.git.mirq-linux@rere.qmqm.pl Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-20ASoC: wm8904: fix typo in DAPM kcontrol nameMichał Mirosław1-2/+2
Trivial fix for typo in "Capture Inverting Mux"es' name. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/f95ae1085f9f3c137a122c4d95728711613c15f7.1566298834.git.mirq-linux@rere.qmqm.pl Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner1-5/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-03ASoC: wm8904: enable MCLK in STANDBYMichał Mirosław1-3/+9
MCLK input is needed when accessing any register after enabling SYSCLK. This also fixes imbalance of clk_enable / clk_disable when transitioning between ON -> STANDBY -> ON bias levels. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-03ASoC: wm8904: save model id directly in of_device_id.dataMichał Mirosław1-6/+3
Save 2x unsigned int of .rodata. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-18ASoC: remove redundant includezhong jiang1-1/+0
module.h already contained moduleparam.h, so it is safe to remove the redundant include. The issue is detected with the help of Coccinelle. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-02ASoC: wm8904: Mark expected switch fall-throughGustavo A. R. Silva1-0/+1
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 115042 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook1-2/+3
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-18ASoC: wm8904: fix spelling mistake: "Caputure" -> "Capture"Colin Ian King1-1/+1
Trivial fix to spelling mistake in SOC_ENUM literal string Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-02-12ASoC: wm8904: replace codec to componentKuninori Morimoto1-181/+174
Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-01ASoC: constify snd_soc_codec_driver structuresJulia Lawall1-1/+1
Check for snd_soc_codec_driver structures that are only passed to snd_soc_register_codec or memcpy (2nd arg), for which the corresponding parameters are declared const. Declare as const snd_soc_codec_driver structures that have these properties. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct snd_soc_codec_driver i@p = { ... }; @ok@ identifier r.i; expression e1,e2,e3; position p; @@ ( snd_soc_register_codec(e1,&i@p,e2,e3) | memcpy(e1,&i@p,e2) ) @bad@ position p != {r.p,ok.p}; identifier r.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct snd_soc_codec_driver i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-01ASoC: wm8904: Fix enum ctl accesses in a wrong typeTakashi Iwai1-2/+2
"DRC Mode" and "EQ Mode" ctls in wm8904 codec driver are enum, while the current driver accesses wrongly via value.integer.value[]. They have to be via value.enumerated.item[] instead. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-18ASoC: wm8904: Make undocumented registers non-readableAxel Lin1-1/+1
Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-22ASoC: wm8904: harmless underflow in wm8904_put_deemph()Dan Carpenter1-1/+1
We try to check that "deemph" is zero or one, but because of an underflow bug, it can also be negative. It's fine, negative values are handled as non-zero. But it's messy and static checkers complain so let's fix it. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-30Merge remote-tracking branches 'asoc/topic/wm8741', 'asoc/topic/wm8753', 'asoc/topic/wm8904', 'asoc/topic/wm8960' and 'asoc/topic/wm8983' into asoc-nextMark Brown1-1/+3
2015-07-15ASoC: drivers: Drop owner assignment from i2c_driverKrzysztof Kozlowski1-1/+0
i2c_driver does not need to set an owner because i2c_register_driver() will set it. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-08ASoC: wm8904: Check for clk_prepare_enable() errorFabio Estevam1-1/+3
clk_prepare_enable() may fail, so we should better check its return value and propagate it in the case of error. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-01ASoC: wm8904: Replace direct snd_soc_codec dapm field accessLars-Peter Clausen1-2/+2
The dapm field of the snd_soc_codec struct is eventually going to be removed, in preparation for this replace all manual access to codec->dapm.bias_level with snd_soc_codec_get_bias_level() and replace all other manual access to codec->dapm with snd_soc_codec_get_dapm(). Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-27ASoC: Move bias level update to the coreLars-Peter Clausen1-1/+0
All drivers have the same line at the end of the set_bias_level callback to update the bias_level state. Move this update into snd_soc_dapm_force_bias_level() and remove them from the drivers. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-10ASoC: wm8904: Fix wrong value references for boolean kctlTakashi Iwai1-2/+2
The correct values referred by a boolean control are value.integer.value[], not value.enumerated.item[]. The former is long while the latter is int, so it's even incompatible on 64bit architectures. Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: <stable@vger.kernel.org>
2015-02-04Merge remote-tracking branches 'asoc/topic/txx9', 'asoc/topic/wm8750', 'asoc/topic/wm8804' and 'asoc/topic/wm8904' into asoc-nextMark Brown1-1/+30
2015-02-04Merge remote-tracking branch 'asoc/topic/w-codec' into asoc-nextMark Brown1-2/+2
2015-01-28ASoC: wm8904: add dt ids tableAlexander Morozov1-1/+30
The WM8904 and WM8918 has the same data type, while the WM8912 has different data type. So, use the data in dt ids table to distinguish them. Signed-off-by: Alexander Morozov <linux@meltdown.ru> [voice.shen@atmel.com: add code to distinguish device type] Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-14ASoC: wm8904: Replace w->codec snd_soc_dapm_to_codec(w->dapm)Lars-Peter Clausen1-2/+2
The codec field of the snd_soc_widget struct is eventually going to be removed, use snd_soc_dapm_to_codec(w->dapm) instead. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-14ASoC: wm8904: fix runtime warningBo Shen1-8/+15
Correct the path name for mux to get rid of the following warning: --->8--- wm8904 1-001a: Control not supported for path ADCL -> [Left] -> AIFOUTL wm8904 1-001a: ASoC: no dapm match for ADCL --> Left --> AIFOUTL wm8904 1-001a: ASoC: Failed to add route ADCL -> Left -> AIFOUTL wm8904 1-001a: Control not supported for path ADCR -> [Right] -> AIFOUTL wm8904 1-001a: ASoC: no dapm match for ADCR --> Right --> AIFOUTL wm8904 1-001a: ASoC: Failed to add route ADCR -> Right -> AIFOUTL wm8904 1-001a: Control not supported for path ADCL -> [Left] -> AIFOUTR wm8904 1-001a: ASoC: no dapm match for ADCL --> Left --> AIFOUTR wm8904 1-001a: ASoC: Failed to add route ADCL -> Left -> AIFOUTR wm8904 1-001a: Control not supported for path ADCR -> [Right] -> AIFOUTR wm8904 1-001a: ASoC: no dapm match for ADCR --> Right --> AIFOUTR wm8904 1-001a: ASoC: Failed to add route ADCR -> Right -> AIFOUTR wm8904 1-001a: Control not supported for path AIFINR -> [Right] -> DACL wm8904 1-001a: ASoC: no dapm match for AIFINR --> Right --> DACL wm8904 1-001a: ASoC: Failed to add route AIFINR -> Right -> DACL wm8904 1-001a: Control not supported for path AIFINL -> [Left] -> DACL wm8904 1-001a: ASoC: no dapm match for AIFINL --> Left --> DACL wm8904 1-001a: ASoC: Failed to add route AIFINL -> Left -> DACL wm8904 1-001a: Control not supported for path AIFINR -> [Right] -> DACR wm8904 1-001a: ASoC: no dapm match for AIFINR --> Right --> DACR wm8904 1-001a: ASoC: Failed to add route AIFINR -> Right -> DACR wm8904 1-001a: Control not supported for path AIFINL -> [Left] -> DACR wm8904 1-001a: ASoC: no dapm match for AIFINL --> Left --> DACR wm8904 1-001a: ASoC: Failed to add route AIFINL -> Left -> DACR ---8<--- Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-08-04Merge remote-tracking branches 'asoc/topic/tlv320aic3x', 'asoc/topic/width', 'asoc/topic/wm0010', 'asoc/topic/wm8904' and 'asoc/topic/wm8962' into asoc-nextMark Brown1-5/+16
2014-07-31ASoC: wm8904: Convert to params_width()Mark Brown1-5/+5
The CODEC doesn't care how data is laid out in memory. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.