| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
stop_urbs() clears ep->ready_playback_urbs with a bare INIT_LIST_HEAD()
instead of unlinking each queued snd_urb_ctx. If a URB survives past
wait_clear_urbs()'s forced STOPPING->STOPPED timeout, its ctx is left
looking "linked" (stale next/prev) even though the list head has
forgotten it. When the endpoint later restarts and re-queues that same
ctx onto the (now real) ready list, and the old URB's completion
handler then calls push_back_to_ready_list() for it a second time, the
ctx is still the list's own tail and list_add's double-add check trips:
kernel BUG at lib/list_debug.c:35 (list_add double add)
Guard push_back_to_ready_list() with a list_empty() check so a
still-linked ctx isn't re-added, and make stop_urbs() actually unlink
each ctx via list_del_init() instead of only resetting the head, so a
dropped ctx doesn't keep looking linked to that guard.
Reported-by: syzbot+9fe3b8d9f5c64ff410a7@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=9fe3b8d9f5c64ff410a7
Signed-off-by: Nguyen Ngoc Thang <ngocthang2710.1999@gmail.com>
Link: https://patch.msgid.link/20260915163110.58124-1-ngocthang2710.1999@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Skip the nonfunctional master mute control on the AVerMedia Live Gamer
ULTRA S GC553Pro (07ca:1553).
USB tracing shows that GET_CUR returns zero bytes instead of the required
one-byte value, both through usbfs and during ALSA initialization.
SET_CUR succeeds, but switching capture off does not mute HDMI audio.
Before the change, the driver exposed a misleading PCM Capture Switch
and logged: 3:2: failed to get current value for ch 0 (-22)
With the patch applied, the switch and warning are absent. A ten-second
sound recording through PipeWire confirmed that stereo 48 kHz, 16-bit
capture still works.
Tested on NixOS with the patched 7.3.0-rc3 kernel. The USB audio driver
object builds with Clang and W=1; sparse and strict checkpatch pass.
Signed-off-by: Asai Neko <sugar@sne.moe>
Link: https://patch.msgid.link/20260914-avermedia-gc553pro-alsa-v1-1-4c694e8b0cd5@sne.moe
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
usb6fire_pcm_in_urb_handler() sizes each outgoing isochronous packet as
(actual_length - 4) / (in_n_analog << 2) * (out_n_analog << 2) + 4, where
actual_length is the unsigned length the device reported for the matching
IN packet. A packet completed with status 0 and actual_length < 4 wraps
the subtraction to 0x7fffffec; a zero-length isochronous packet is legal
on the bus, and the preceding loop rejects only non-zero status. The sum
reaches memset() on out_urb->buffer, a 4832-byte object from
kcalloc(PCM_MAX_PACKET_SIZE, PCM_N_PACKETS_PER_URB).
Even without the wrap the result is out of bounds: at 88.2/96 kHz the
4-in/6-out scaling turns a full 420-byte IN packet into 628, so eight
packets span 5024 bytes of that buffer. usb_submit_urb() rejects an
over-long descriptor only after the memset() and the
usb6fire_pcm_playback() copy of user PCM data have run.
Guard the subtraction as the sibling usb6fire_pcm_capture() already does,
and limit the frame count to what fits in rt->out_packet_size, the OUT
endpoint's wMaxPacketSize. This bounds total_length by the buffer size
while keeping each packet length aligned to a whole output frame.
BUG: KASAN: out-of-bounds in usb6fire_pcm_in_urb_handler (sound/usb/6fire/pcm.c:338)
Write of size 18446744073709551456 at addr ffff88802a3d0000 by task vhci_rx/5018
Call Trace:
dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120)
print_report (mm/kasan/report.c:378 mm/kasan/report.c:482)
kasan_report (mm/kasan/report.c:595)
kasan_check_range (mm/kasan/generic.c:186 mm/kasan/generic.c:200)
__asan_memset (mm/kasan/shadow.c:84)
usb6fire_pcm_in_urb_handler (sound/usb/6fire/pcm.c:338)
__usb_hcd_giveback_urb (drivers/usb/core/hcd.c:1657)
usb_hcd_giveback_urb (drivers/usb/core/hcd.c:1741)
vhci_rx_loop (drivers/usb/usbip/vhci_rx.c:107 drivers/usb/usbip/vhci_rx.c:242)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
Allocated by task 10:
__kmalloc_cache_noprof (mm/slub.c:5563)
usb6fire_pcm_init (sound/usb/6fire/pcm.c:560 sound/usb/6fire/pcm.c:595)
usb6fire_chip_probe (sound/usb/6fire/chip.c:133)
usb_probe_interface (drivers/usb/core/driver.c:399)
The buggy address belongs to the object at ffff88802a3d0000
which belongs to the cache kmalloc-8k of size 8192
The buggy address is located 0 bytes inside of
4832-byte region [ffff88802a3d0000, ffff88802a3d12e0)
Kernel panic - not syncing: Fatal exception in interrupt
Fixes: c6d43ba816d1 ("ALSA: usb/6fire - Driver for TerraTec DMX 6Fire USB")
Reported-by: co+855929c2df672879@bugs.sh
Closes: https://lore.kernel.org/all/gisnub8aWGLbyZLcDCSc7zWsHonMWGcyRgt5%40bugs.sh/
Assisted-by: LLM
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Link: https://patch.msgid.link/20260914074324.3590843-1-xmei5@asu.edu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The Behringer FCA1616 (1397:0004) returns silent capture samples unless its
playback endpoint is active.
Use the existing fixed implicit-feedback mechanism to keep playback endpoint
0x01 on interface 1 active during capture.
Tested with 16-channel S32_LE capture at 44.1 and 48 kHz.
Signed-off-by: Kitty Makin <autumnull@posteo.net>
Link: https://patch.msgid.link/20260914002334.12691-1-autumnull@posteo.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
data_ep_set_params() allocates each data URB for exactly u->packets
isochronous frames, so urb->iso_frame_desc[] has u->packets slots and
ctx->packets is the driver's only record of that limit. For an implicit
feedback sink, snd_usb_queue_pending_output_urbs() overwrites it with the
sync source's packet count, which is calculated independently from the
capture endpoint's parameters. When that count is larger,
prepare_playback_urb() and prepare_silent_urb() can write
iso_frame_desc[] past the allocation; their existing bounds limit payload
bytes, not the descriptor index.
The reproducer uses a high-speed UAC2 device declaring bInterval 1 for
implicit feedback capture (8 packets) and bInterval 4 for playback
(1 packet). On the first capture completion after the stream starts, it
accesses seven descriptors spanning 112 bytes beyond the one-packet URB:
BUG: KASAN: slab-out-of-bounds in prepare_playback_urb (sound/usb/pcm.c:1560)
Write of size 4 at addr ffff88801e696ad0 by task vhci_rx/178
prepare_playback_urb (sound/usb/pcm.c:1560)
prepare_outbound_urb (sound/usb/endpoint.c:340)
snd_usb_queue_pending_output_urbs (sound/usb/endpoint.c:501)
snd_complete_urb (sound/usb/endpoint.c:1834)
__usb_hcd_giveback_urb (drivers/usb/core/hcd.c:1657)
usb_hcd_giveback_urb (drivers/usb/core/hcd.c:1741)
vhci_rx_loop (drivers/usb/usbip/vhci_rx.c:107)
kthread (kernel/kthread.c:436)
The buggy address belongs to the object at ffff88801e696a00
which belongs to the cache kmalloc-256 of size 256
The buggy address is located 0 bytes to the right of
allocated 208-byte region [ffff88801e696a00, ffff88801e696ad0)
Record the allocated packet count per endpoint and clamp both the adopted
count and the packet-size copy to it. Fold the Format Type II delimiter
into urb_packs before the allocation loop so the recorded limit matches
every URB.
Fixes: cf044e441902 ("ALSA: usb-audio: Update the number of packets properly at receiving")
Reported-by: co+8eacd4fa193b1b28@bugs.sh
Closes: https://lore.kernel.org/all/22xPn8drvIUtYgVeQnBiNqXuevOTpBAjepLz%40bugs.sh/
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-5
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Link: https://patch.msgid.link/20260912200530.1955491-1-xmei5@asu.edu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Although we tried to fix the potential UAF issues at USB disconnect on
bcd2000 driver, there is still an overlooked case -- namely, when a
rawmidi trigger callback has been already running at USB disconnect
handling, the in-flight function (e.g. bcd2000_midi_send()) could
still access the URB, because the previous URB NULL-check & clearance
was considered only for the URB complete callbacks, but not about the
parallel rawmidi operations.
For addressing the race, this patch introduced a new spinlock that
covers each rawmidi operation as well as the rawmidi handling in the
complete callback. The URB is cleared with the lock, so it guarantees
that the pending rawmidi task already finished or a NULL check is
effective.
Fixes: 459d3a64766f ("ALSA: bcd2000: clear the URB pointers on disconnect")
Link: https://patch.msgid.link/20260910155227.996210-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The hwdep mmap callback rejects read-buffer mappings that are initially
writable, but leaves VM_MAYWRITE set on mappings created with PROT_READ.
A process that can open the hwdep node O_RDWR can later use mprotect() to
make the mapping writable.
The read allocation begins with struct usb_stream. Its read_size member is
used by the fault handler to decide which pages belong to the read buffer.
The read VMA intentionally remains expandable because pcm_usb_stream uses
mremap() after reading that size. Changing read_size first can therefore
map and access pages beyond the allocation. The same member is also
consumed by usb_stream_free(), where changing it can make
free_pages_exact() release pages outside the allocation.
Clear VM_MAYWRITE for read-buffer mappings after rejecting an initially
writable VMA. This keeps the separate output-buffer mapping writable while
preventing later permission upgrades.
Fixes: 030a07e44129 ("ALSA: Add USB US122L driver")
Cc: stable@vger.kernel.org
Signed-off-by: Kazuki Hanai <hnkz.64@gmail.com>
Link: https://patch.msgid.link/20260908110053.2950767-1-hnkz.64@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The Behringer UV1 is a microphone audio processor with a USB audio
interface, which experiences periodic stutters unless implicit_fb is used.
This seems to be a similar device to the Behringer UMC series, so I
copied the quirks from those. I've confirmed that my own UV1 works great
with these flags set.
Signed-off-by: Nick Pegg <nick@nickpegg.com>
Link: https://patch.msgid.link/20260906155616.1625465-1-nick@nickpegg.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
After a power cycle and reenumeration, the Behringer CM1A* leaves its
MIDI endpoint inoperative. USB enumeration and driver binding
complete successfully, but MIDI outputs remain pending.
A GET_DESCRIPTOR request for the device descriptor, issued after USB
configuration, makes the endpoint operational. Add a one time boot quirk
to perform that request before ALSA initializes the device.
*
ID 1397:1234 BEHRINGER International GmbH CM1A
Signed-off-by: Sebastian Dalfuß <sd@sedf.de>
Link: https://patch.msgid.link/apwG4DRfNyvmRzyb@sedf.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
i_usx2y_in04_int() processes the interrupt URB data without checking
urb->actual_length. A short transfer from a malfunctioning device
would cause the handler to process uninitialized heap data from the
kmalloc-allocated in04_buf, which is then copied to the mmap-accessible
ctl_snapshot[] array.
Fix by using kzalloc() for in04_buf to zero-initialize the buffer,
and adding an actual_length check to skip processing on short
transfers while still resubmitting the URB.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Tristan Madani <tristan@talencesecurity.com>
Link: https://patch.msgid.link/20260904205826.4071119-2-tristmd@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The in04_last array in struct usx2ydev is declared as char[24], but
in04_buf is allocated as sizeof(struct us428_ctls) which is 21 bytes.
In i_usx2y_in04_int(), when ctl_snapshot_last == -2 (initialization
path):
memcpy(usx2y->in04_last, usx2y->in04_buf, sizeof(usx2y->in04_last));
This copies 24 bytes from a 21-byte slab allocation, reading 3 bytes
past the end of the source object.
Introduce a USX2Y_IN04_SIZE constant defined as sizeof(struct
us428_ctls) and use it consistently for the in04_last array, the
in04_buf allocation, the URB transfer length, and the comparison loop,
replacing the bare 24 and 21 literals throughout.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Tristan Madani <tristan@talencesecurity.com>
Link: https://patch.msgid.link/20260904205826.4071119-1-tristmd@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The USB 6fire driver uses URBs embedded in different structs for PCM,
MIDI and communication, and this is basically a buggy implementation
nowadays; since a URB is managed with a refcount, this may lead to a
UAF when the URB is released asynchronously.
For addressing the problem, this patch converts those embedded URBs to
ones that are properly allocated via usb_alloc_urb(). The
pcm_urb.packets[] is gone, as it's allocated by usb_alloc_urb(), hence
it's found in urb.iso_frame_desc[] instead.
The conversions are rather straightforward; each embedded struct urb
is changed to a pointer, and its callers are updated accordingly.
The resource for those structs are released in the common destructor
functions (usb6fire_comm_free(), etc), which are called at both the
init error path and the disconnect.
No functional changes, only compile-tested.
Link: https://lore.kernel.org/20260903130757.0668310a.michal.pecio@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260903160458.1938392-4-tiwai@suse.de
|
|
The hiface driver uses URBs embedded in struct pcm_urb, and this is
basically a buggy implementation nowadays; since a URB is managed with
a refcount, this may lead to a UAF when the URB is released
asynchronously.
For addressing the problem, this patch converts the embedded URBs to
ones that are properly allocated via usb_alloc_urb().
The conversion is rather straightforward; pcm_urb.instance became a
pointer, assigned/freed via usb_alloc_urb() and usb_free_urb(), and
the call with this is corrected accordingly.
Along with it, the resource release is done in the common destructor
that is called from both at the error path and the disconnect.
No functional changes, only compile-tested.
Link: https://lore.kernel.org/20260903130757.0668310a.michal.pecio@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260903160458.1938392-3-tiwai@suse.de
|
|
UA101 driver uses URBs embedded in struct ua101, and this is basically
a buggy implementation nowadays; since a URB is managed with a
refcount, this may lead to a UAF when the URB is released
asynchronously.
For addressing the problem, this patch converts the embedded URBs to
ones that are properly allocated via usb_alloc_urb(). The
iso_frame_desc[] is gone, as it's allocated together by
usb_alloc_urb().
Along with the dynamic allocation of each URB, the ua101.urbs[]
becomes a static array of struct ua101_urb, and struct ua101_urb
contains the pointer to struct ua101. Those are needed to handle the
ready_list linked list in the complete callback.
No functional changes, only compile-tested.
Link: https://lore.kernel.org/20260903130757.0668310a.michal.pecio@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260903160458.1938392-2-tiwai@suse.de
|
|
The epq_in_urb object belonging to the caiaq device is coupled within
the struct snd_usb_caiaqdev. After usb_submit_urb(epq_in_urb, GFP_KERNEL)
executes successfully, epq_in_urb is successfully added to the urbp_list
queue of the dummy HCD driver (userspace specifies dummy_hcd as the HCD
layer driver for the caiaq USB device).
When init_card() calls snd_usb_caiaq_send_command() which subsequently
fails due to a timeout, and proceeds to call snd_card_free() to release
the card, the embedded ep1_in_urb object is also freed. When the dummy
HCD driver detects that the URB has been unlinked, it returns the URB
(by usb_hcd_giveback_urb()), which triggers [1].
Decouple the ep1_in_urb object from the struct snd_usb_caiaqdev and switch
to using a pointer instead. Separately allocate and manage the memory for
ep1_in_urb to prevent the release of the snd_card memory object from
interfering with it.
midi_out_urb has the same issue as ep1_in_urb and is handled in the same
way.
[1]
BUG: KASAN: slab-use-after-free in usb_free_urb+0x24/0x120 drivers/usb/core/urb.c:96
Write of size 4 at addr ffff88803cee1050 by task ktimers/1/29
Call Trace:
usb_free_urb+0x24/0x120 drivers/usb/core/urb.c:96
dummy_timer+0xaac/0x4d50 drivers/usb/gadget/udc/dummy_hcd.c:2019
__run_hrtimer kernel/time/hrtimer.c:2067 [inline]
__hrtimer_run_queues+0x3eb/0xaf0 kernel/time/hrtimer.c:2124
hrtimer_run_softirq+0x1e1/0x2e0 kernel/time/hrtimer.c:2141
Allocated by task 36:
snd_card_new+0x7b/0x110 sound/core/init.c:184
create_card sound/usb/caiaq/device.c:429 [inline]
snd_probe+0x236/0x1af0 sound/usb/caiaq/device.c:544
Freed by task 36:
snd_card_free_when_closed sound/core/init.c:630 [inline]
snd_card_free+0x138/0x1d0 sound/core/init.c:662
snd_probe+0x162b/0x1af0 sound/usb/caiaq/device.c:553
Fixes: 523f1dce3743 ("[ALSA] Add Native Instrument usb audio device support")
Reported-by: syzbot+832ce9fa3face1b7d44d@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=832ce9fa3face1b7d44d
Tested-by: syzbot+832ce9fa3face1b7d44d@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@sina.com>
Link: https://patch.msgid.link/20260903130521.554840-1-eadavis@sina.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The fix for caiaq driver's resource management to handle the errors
tries to release the resources in a common destructor call, but as a
sashiko review for another patch suggested, some of the audio
resources such as URBs have been already freed, and this may lead to a
double-free.
For addressing the double-free, call the common destructor function
from each place, and assure that the resource pointers get cleared.
Link: https://sashiko.dev/#/patchset/20260903084747.535367-1-eadavis%40sina.com
Fixes: 28abd224db4a ("ALSA: caiaq: Handle probe errors properly")
Link: https://patch.msgid.link/20260903103855.1807838-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The Audient iD24 (2708:000d) exposes feature unit 12 as a 4-channel
"Speaker Playback Volume" control (cmask 0xf, -127..0 dB). The device
does not actually apply this volume to all of its output channels: the
left main output ignores it and stays at 0 dB, while the right main
output honors it.
When userspace (PulseAudio / PipeWire in a stereo profile) adopts this
control as the master playback volume, any setting below maximum
produces a stereo imbalance on the main outputs.
This was verified against the device's internal meters: with the
control set to 107/127 (-20 dB) on all four channels and a digitally
identical L/R sine played back, both DAW return meters read the same
level while the right main output metered exactly 20 dB below the
left. Restoring the control to 127 (0 dB) restored the balance.
Rename the control to "Monitor Mix Playback" so that it is not picked
up as the stream's master volume control, in line with similar quirks
for other devices. The control remains accessible for manual use.
Signed-off-by: Peter Drabik <drabik.p@gmail.com>
Link: https://patch.msgid.link/20260831195855.1836617-1-drabik.p@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The snd_usbmidi_us122l_output() picks a count of 2 on anything slower
than high speed and never relates it to ep->max_transfer. The URB
buffer holds exactly max_transfer bytes, so a device declaring a one
byte bulk endpoint takes two bytes from snd_rawmidi_transmit(), and the
memset that pads the rest computes 1 - 2 in int and wraps to SIZE_MAX.
Only 0x800e and 0x800f are pinned to nine bytes. The US-122MKII at
0x0644:0x8021 falls to the default and takes usb_maxpacket(), which the
USB core only clamps downward.
The akai and novation output ops in this file were given the same guard
recently. Do the same here.
Fixes: 030a07e44129 ("ALSA: Add USB US122L driver")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-5
Signed-off-by: HyeongJun An <sammiee5311@gmail.com>
Link: https://patch.msgid.link/20260901090409.1478573-1-sammiee5311@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
FCP meter and hwdep operations issue control transfers without
preventing runtime suspend or disconnect. Protect the central
request-and-response transport. One reference then covers the command,
acknowledgment wait, and response.
The initial step-zero request bypasses that transport. Hold an outer
reference across the complete initialization sequence so the device stays
active through step zero, notification-URB setup, and both initialization
commands. The central transport keeps its guard for calls outside
initialization; the existing active counter balances the nested calls.
FCP has no private resume callback. Its suspend callback only removes the
notification URB. Taking the initialization and transport guards under the
existing protocol mutex causes no resume-side lock inversion.
Assisted-by: Codex:gpt-5.6-sol
Signed-off-by: Will Porter <mrwillporter@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260827232143.149197-7-mrwillporter@gmail.com
|
|
The RME Digiface status and register helpers issue vendor requests
without preventing runtime suspend or disconnect. The volatile status
controls can repeatedly reach these unguarded paths while userspace
polls them.
Protect both helpers with snd_usb_lock. All Digiface get and put
callbacks then resume the device and hold the disconnect reference
across their transfer.
Assisted-by: Codex:gpt-5.6-sol
Signed-off-by: Will Porter <mrwillporter@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260827232143.149197-6-mrwillporter@gmail.com
|
|
Scarlett2 controls and hwdep operations reach the proprietary USB
transport without preventing runtime suspend or disconnect. Protect the
central request-and-response helper. One reference then covers the
command, acknowledgment wait, and response.
The runtime and system resume hook submits only the notification URB. It
takes no protocol mutex. Thus, the transport guard does not invert the
existing data_mutex or usb_mutex order. Keep the suspend-time config save
on the unguarded helper because it runs inside the USB suspend callback.
This change protects each USB transaction. It does not hold a runtime-PM
reference across the asynchronous flash-erase interval.
Assisted-by: Codex:gpt-5.6-sol
Signed-off-by: Will Porter <mrwillporter@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260827232143.149197-5-mrwillporter@gmail.com
|
|
The Scarlett Gen 1 meter callback reads the device without preventing
runtime suspend or disconnect. The transfer can fail when userspace
polls the volatile control after the device suspends.
Hold snd_usb_lock across the meter request. This matches the guarded
Forte and common mixer control paths in this file.
Assisted-by: Codex:gpt-5.6-sol
Signed-off-by: Will Porter <mrwillporter@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260827232143.149197-4-mrwillporter@gmail.com
|
|
The TASCAM control helpers submit vendor requests without preventing
runtime suspend or disconnect. This affects mixer writes and the
volatile meter path.
Protect both send and receive helpers with snd_usb_lock. Acquire the PM
guard before chip->mutex in the receive path so autoresume cannot invert
the mutex order.
Assisted-by: Codex:gpt-5.6-sol
Signed-off-by: Will Porter <mrwillporter@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260827232143.149197-3-mrwillporter@gmail.com
|
|
The Studio 1810c control callbacks issue vendor transfers without
preventing runtime suspend or disconnect. A transfer attempted after
runtime suspend can fail because the USB device cannot accept
submissions.
Take snd_usb_lock before the driver data and USB mutexes in both
callbacks. This resumes the device before either the state read or
control write. It also prevents disconnect cleanup from racing the
complete operation.
Assisted-by: Codex:gpt-5.6-sol
Signed-off-by: Will Porter <mrwillporter@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260827232143.149197-2-mrwillporter@gmail.com
|
|
A failed system resume can leave the card unusable until reboot.
usb_audio_resume() jumps to err_out when snd_usb_pcm_resume() or
snd_usb_mixer_resume() fails. The error path skips the out: block, which
restores D0 and decrements chip->num_suspended_intf.
The card stays in SNDRV_CTL_POWER_D3hot, so later control access blocks in
snd_power_ref_and_wait(). USB core logs an interface resume callback error.
It does not retry that callback, so a later callback cannot complete the
skipped cleanup.
usb_audio_suspend() increments num_suspended_intf before returning success.
A system-resume callback must consume the system-suspend count even if a
component resume fails. Otherwise, the stranded count skews later suspend
and resume cycles.
Do not apply this cleanup to runtime-resume errors. Runtime PM can retry
-EAGAIN or -EBUSY without another suspend callback. The count must continue
to describe that suspended interface. Other runtime-resume errors latch
runtime_error in the PM core and do not cause an immediate callback retry.
Both parts of the system-resume error path are longstanding. Commit
88a8516a2128a ("ALSA: usbaudio: implement USB autosuspend") introduced
err_out past the D0 restore. Commit 862b2509d157c ("ALSA: usb-audio: Fix
inconsistent card PM state after resume") later moved
num_suspended_intf-- into the out: block. The error path now skips both
operations.
No third-party code is needed to reach the error path.
snd_usb_mixer_resume() ends in snd_usb_mixer_activate(), which returns the
result of usb_submit_urb() for devices that have a mixer status URB. Its
mixer->private_resume hook can also fail through scarlett2_init_notify().
snd_usb_pcm_resume() issues a SET_CUR request to a UAC3 power domain. It
can return -EPIPE or -EIO when the device stalls the request.
Route a component error through out: only when system_suspend is nonzero.
Continue to return runtime-resume errors through err_out. Later component
resume stages remain skipped. The original error still reaches USB core.
A later transfer can fail if the device did not recover.
I reproduced the system-resume failure on an Audient iD14 MkI with an
out-of-tree diagnostic mixer resume hook. An injected -EIO on the unpatched
core left control readers in uninterruptible sleep in
snd_power_ref_and_wait() until a reboot. With this patch, the same failure
restored control access. A second system suspend and resume also succeeded
after I disabled fault injection.
Assisted-by: Claude:claude-opus-5
Assisted-by: Antigravity:gemini-3.1-pro-high
Assisted-by: Codex:gpt-5.6-sol
Fixes: 88a8516a2128a ("ALSA: usbaudio: implement USB autosuspend")
Fixes: 862b2509d157c ("ALSA: usb-audio: Fix inconsistent card PM state after resume")
Cc: <stable@vger.kernel.org>
Signed-off-by: Will Porter <mrwillporter@gmail.com>
Link: https://patch.msgid.link/20260824225757.26749-1-mrwillporter@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The M-Audio Venom (0763:2084) does not answer any GET_CUR request
of its feature units, hanging up the USB microcontroller and
"responding" with timeouts. So the mixer building lasts around 47
seconds, and the device does not stream at all.
The same GET_CUR requests issued through libusb (with no kernel
driver bound) complete correctly and blazingly fast. So it seems
to only happen during the initial probe.
I defined an explicit composite quirk to bypass the mixer creation,
as it is not needed (the synth already comes with volume controls).
With both this and the device flag applied, the synth works
flawlessly.
Signed-off-by: Federico Valentín Andrade <fandrade@frba.utn.edu.ar>
Link: https://patch.msgid.link/20260824140211.17003-3-fandrade@frba.utn.edu.ar
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The M-Audio Venom (0763:2084) is an USB Audio Class 1 compliant
synth with an integrated audio interface, it does not implement
GET_CUR on SAMPLING_FREQ_CONTROL, hanging up if requested on
endpoint 0.
The first class request issued by the driver after enumeration is
a GET_CUR on endpoint 0x02, freezing the device's USB microcontroller.
Timing out on every transfer afterwards with -ETIMEDOUT, such as
SET_INTERFACE, so neither the mixer nor any streaming interface is set up.
Analyzing a USBPcap capture of the Windows driver I found it never
requests the sampling frequency, as the synth exposes a single
discrete of 44100Hz on both streaming interfaces, thus asking for it
is unnecessary.
So I applied get_sample_rate to avoid this check, and
disable_autosuspend because the synth doesn't come back from being
suspended.
Signed-off-by: Federico Valentín Andrade <fandrade@frba.utn.edu.ar>
Link: https://patch.msgid.link/20260824140211.17003-2-fandrade@frba.utn.edu.ar
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
snd_usbmidi_novation_output() lays out a two-byte header at
transfer_buffer[0..1] and passes &transfer_buffer[2] together with a
length of ep->max_transfer - 2 to snd_rawmidi_transmit():
count = snd_rawmidi_transmit(ep->ports[0].substream,
&transfer_buffer[2],
ep->max_transfer - 2);
ep->max_transfer comes from the output endpoint's wMaxPacketSize via
usb_maxpacket(). A malformed or malicious device can advertise a bulk
OUT endpoint with a wMaxPacketSize of 1 - the USB core only clamps this
value downwards - so ep->max_transfer becomes 1 and the count argument
becomes -1.
snd_rawmidi_transmit() passes the negative count on to
__snd_rawmidi_transmit_peek(), where "if (count1 > count) count1 = count"
leaves count1 negative; get_aligned_size() keeps it negative for a
byte-stream substream, so the following memcpy(buffer, ..., count1) runs
with a (size_t)-1 length and writes far past the transfer buffer, which
was allocated with usb_alloc_coherent(ep->max_transfer).
This is the same class of bug that was fixed for snd_usbmidi_akai_output()
in commit 0970274613fb ("ALSA: usb-audio: fix OOB write in
snd_usbmidi_akai_output()"); the novation output routine was left
unguarded. Bail out when the endpoint cannot hold the two-byte header
plus at least one payload byte.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Marouane El Moufid <eun0us@espilon.net>
Link: https://patch.msgid.link/178749334830.543645.13722252148340572274@espilon.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add the iD14 MkI USB ID to the existing audient_id14_map. This
names feature unit 12 Monitor Mix Playback Volume.
Live meter A/B testing on MkI USB ID 2708:0002 reproduced the same
asymmetric attenuation seen on MkII. At ALSA value 104, the right
channel was 23.07 dB below the left. At 127, both channels were equal.
The misleading Speaker Playback Volume name causes PipeWire to adopt
FU12 as the stream master. Reuse the existing map to keep the control
available while preventing that selection.
Hardware-tested on Bazzite 7.2.0-ogc4.1.fc44.x86_64 with this change
backported. ALSA exposed Monitor Mix Playback Volume after module load
and USB reconnect. PipeWire volume changes from 100% to 35% and back
left all four FU12 values at 127. Channel-isolated left/right playback
remained balanced after reconnect.
Build-tested with CONFIG_SND_USB_AUDIO=m using the focused sound/usb
target.
Assisted-by: Codex:gpt-5
Signed-off-by: Will Porter <mrwillporter@gmail.com>
Link: https://patch.msgid.link/20260823015353.686080-1-mrwillporter@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The Logitech PRO X Wireless is a wireless headset with a hotpluggable
microphone.
Its Playback mixer's GET_CUR somehow becomes broken when the microphone
is detached, so set QUIRK_FLAG_MIXER_GET_CUR_OK to prevent the mixer
behavior from depending on whether the microphone is attached.
Meanwhile, the Playback mixer's minimum value doesn't work properly,
thus set QUIRK_FLAG_MIXER_PLAYBACK_MIN_MUTE to prevent userspace audio
stack from using the minimum mixer value to tune volume (setting it
when muted is OK).
Reported-by: Alexander Niemeyer <adventureFAN@gmx.de>
Closes: https://msgid.link/6262cbbd-d1f2-4c9d-a1c7-9c5d12636f4b@gmx.de
Closes: https://msgid.link/7984832b-86f6-4934-bfc0-1ed70218973a@gmx.de
Signed-off-by: Rong Zhang <i@rong.moe>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260823-uac-demote-sticky-check-v1-4-a8cbe572edff@rong.moe
|
|
The default behavior of sticky check now becomes what
QUIRK_FLAG_MIXER_GET_CUR_BROKEN originally does, so the quirk flag is no
longer needed.
On some devices, whether their GET_CUR being sticky depends on whether
hotpluggable components are present. When the hotpluggable components
are missing on probe, their GET_CUR behavior is classified as broken.
Therefore, reverse QUIRK_FLAG_MIXER_GET_CUR_BROKEN as
QUIRK_FLAG_MIXER_GET_CUR_OK, so that it can be set to prevent the
heuristics from gating GET_CUR.
Note that even if the quirk flag is set, init_cur_mix_raw() should still
initialize the mixer value to cval->min, otherwise restoring the bogus
saved value on the first channel could lead to unbalanced channels.
Signed-off-by: Rong Zhang <i@rong.moe>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260823-uac-demote-sticky-check-v1-3-a8cbe572edff@rong.moe
|
|
Currently, a mixer is disabled when its GET_CUR is sticky, causing
userspace to fall back to soft mixers, unless
QUIRK_FLAG_MIXER_GET_CUR_BROKEN is set. This leads to issues on some
wireless headphones with broken GET_CUR but effective SET_CUR, which use
poorly-performed lossy codecs and are prone to audible distortion at low
volume. They have to set the quirk flag to reeanble the mixer.
Considering that users can always opt into soft mixers if they need it,
i.e., when SET_CUR is stubbed, demote the severity of sticky GET_CUR by
marking GET_CUR as broken and only provide mixer values from the cache.
The mixer itself is still registered.
Signed-off-by: Rong Zhang <i@rong.moe>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260823-uac-demote-sticky-check-v1-2-a8cbe572edff@rong.moe
|
|
QUIRK_FLAG_ALWAYS_SET_RATE was introduced into usb-audio before without
appropriate documentation, so add it.
There is an odd colon in its comments, so remove it too.
As this is often forgotten, also add a reminder to the end of the
enumeration.
Fixes: 786f91da8535 ("ALSA: usb-audio: add QUIRK_FLAG_ALWAYS_SET_RATE for Mackie DLZ Creator XS")
Signed-off-by: Rong Zhang <i@rong.moe>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260823-uac-demote-sticky-check-v1-1-a8cbe572edff@rong.moe
|
|
The SMSL USB DAC with USB ID 152a:85dd produces an audible pop
when snd-usb-audio performs its redundant probe-time interface setup.
It also pops when returning from runtime suspend.
Skip the probe-time interface setup and disable runtime autosuspend for
this device. Both flags have been verified through the quirk_flags module
parameter.
Keep QUIRK_FLAG_DSD_RAW in the device entry because the exact match takes
precedence over the generic 0x152a vendor entry from which the device
currently inherits that flag.
Signed-off-by: Edward Blair <edward.blair@gmail.com>
Link: https://patch.msgid.link/20260822114110.1069541-1-edward.blair@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The Creative Sound Blaster Play! 3 (041e:324d) exposes a Feature Unit
volume control with a range of -44.00 dB .. 0.00 dB over raw values
0..88, but raw value 0 is in fact a hard mute rather than -44.00 dB.
Tested on hardware.
Signed-off-by: Chad Talbott <chad.talbott@gmail.com>
Link: https://patch.msgid.link/20260819003237.452807-1-chad.talbott@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Audio control requests that set sampling frequency sometimes fail on
this card. Adding delay between control messages eliminates that problem.
usb 1-1: New USB device found, idVendor=0666, idProduct=0880
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: USB Audio
usb 1-1: Manufacturer: SPACETOUCH
usb 1-1: SerialNumber: 000000000
Signed-off-by: Lianqin Hu <hulianqin@vivo.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/TYUPR06MB6217D93F595D9995413C9721D2A72@TYUPR06MB6217.apcprd06.prod.outlook.com
|
|
|
|
On the Audient iD14 (2708:0008), feature unit 12 is traced through to
the Speaker output terminal and is therefore exported as "Speaker
Playback Volume". The name fits it badly. It advertises Volume on
only four of its six logical channels, which the driver records as
cmask=0xf, channels=4 on a 6-channel playback stream, and it sits on
the monitor mixer branch rather than in the direct playback path:
INPUT_TERMINAL 2 (USB streaming, 6ch) -> EXTENSION_UNIT 51 ->
FEATURE_UNIT 10 (no controls) -> OUTPUT_TERMINAL 20 (Speaker)
while FU 12 hangs off MIXER_UNIT 60 and feeds back into
EXTENSION_UNIT 51.
Userspace adopts the control as the stream's hardware playback volume,
so any setting below 0 dB attenuates part of the stream and not the
rest. Measured over the device's own digital loopback, with one
-12 dBFS tone per channel played straight to hw:, PCM channel 0 is
unaffected while channel 1 tracks the control: at 107/127 (-20 dB) the
two read -15.89 and -35.89 dBFS, a 20.00 dB imbalance, and at 127/127
both read -15.89 dBFS.
Give the unit a non-standard name so that it is no longer taken for
the stream's master volume. Dropping the control instead also fixes
the imbalance, but FU 12 keeps its value across a module reload, so
dropping it strands a device that is already attenuated with nothing
able to reset it. Renaming leaves the monitor gain reachable and that
recovery path intact.
The mapped name ends in "Playback" because a name from the map
suppresses the automatic " Playback" but still gets " Volume"
appended; the control comes out as "Monitor Mix Playback Volume".
Tested on the ACP path with PipeWire, which is where the problem
reproduces: the control now stays at 127 at every volume setting and
the imbalance is 0.00 dB, and setting it by hand to 107 and back to
127 gives 20.00 dB and 0.00 dB as before.
Link: https://lore.kernel.org/linux-sound/0102019fed22f9d3-fa294ec5-02f1-4fd3-b3fa-76efc14331cc-000000@eu-west-1.amazonses.com/T/#u
Signed-off-by: Neil Andrews <neil@androos.io>
Link: https://patch.msgid.link/0102019ffcdbb1e6-9b59d3cc-ef05-4df1-8f9f-fb2f425bcda2-000000@eu-west-1.amazonses.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The fixed audio formats for the PreSonus AudioBox USB specify a discrete
rate mask but leave nr_rates at zero and rate_table unset. find_format()
therefore rejects every requested rate, preventing the playback and
capture streams from being opened.
Add the advertised 44100 and 48000 Hz rates to both streams and report
their 24 significant bits.
Fixes: 34fe4a9df247 ("ALSA: usb-audio: Add quirk for PreSonus AudioBox USB")
Cc: stable@vger.kernel.org
Signed-off-by: Trevor Vorhees <vorhees-work@proton.me>
Link: https://patch.msgid.link/20260811-audiobox-usb-fix-v1-1-13c8b7f071ea@proton.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The Valeton GP-200 guitar multi-effects processor exhibits a continuous
popping noise (~6Hz) during playback and recording. Force implicit
feedback to resolve the issue.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221662
Signed-off-by: Zhang Heng <zhangheng@kylinos.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260811024902.134457-4-zhangheng@kylinos.cn
|
|
This is managed by USB core and drivers aren't expected to touch it.
It should only be not NULL on a submitted URB, in which case clearing
defeats the "submitted while active" sanity check in usb_submit_urb()
and may crash the HCD handling the URB and panic the kernel.
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Link: https://patch.msgid.link/20260810075728.483c827e.michal.pecio@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
scarlett2_init_notify() used mixer->urb, which
snd_usb_mixer_status_create() allocates for the UAC2 status interrupt
endpoint and mixer.c manages. On a device with that endpoint, the
"already in use" check fires on the status URB and returns 0 for
success without doing anything. No notification URB is submitted, and
cmd_done is left zeroed because it is initialised past that check and
nowhere else. scarlett2_usb_init() then issues SCARLETT2_USB_INIT_1
and wait_for_completion_timeout() would crash adding to the zeroed
wait.head.
Use a separate URB in scarlett2_data, as done for FCP, and initialise
cmd_done in scarlett2_init_private(). mixer.c was also freeing the URB
in snd_usb_mixer_free() and resubmitting it in
snd_usb_mixer_activate(), so scarlett2 must now do both: add
scarlett2_cleanup_urb(), called from private_free and private_suspend,
and a private_resume callback to re-establish the URB after resume.
scarlett2_init_notify() is reached from there, and the URB kill path
in scarlett2_notify() completes cmd_done, leaving a stale count that
would satisfy the next command's wait before the device ACKs. Use
reinit_completion() to clear it.
Also free the URB if the transfer buffer allocation fails, and both if
usb_submit_urb() fails. Move scarlett2_init_notify() up next to
scarlett2_cleanup_urb() so scarlett2_init_private() can reference it
without a forward declaration.
Fixes: 1b65088958ca ("ALSA: scarlett2: Implement handling of the ACK notification")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-5
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/ffb8ba37d5d605dfdfd8576949d67098651f9349.1786290885.git.g@b4.vu
|
|
fcp_init_notify() used mixer->urb, which snd_usb_mixer_status_create()
allocates for the optional UAC2 status interrupt endpoint and mixer.c
kills, resubmits and frees. On a device with that endpoint,
fcp_init_notify()'s "already set up" early return fires on the status
URB and returns success without doing anything. No FCP notification
URB is submitted, and cmd_done is left zeroed because it is
initialised past that early return and nowhere else. fcp_init() then
issues init1_opcode and wait_for_completion_timeout() would crash
adding to the zeroed wait.head. fcp_cleanup_urb() would also kill and
free mixer.c's status URB.
Use a separate URB in fcp_data, and initialise cmd_done in
fcp_init_private() where fcp_data is allocated. fcp_init_notify() is
reached again after suspend via fcp_reinit(), and the URB kill path in
fcp_notify() completes cmd_done, leaving a stale count that would
satisfy the next command's wait before the device ACKs. Use
reinit_completion() to clear it.
Fixes: 46757a3e7d50 ("ALSA: FCP: Add Focusrite Control Protocol driver")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-5
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/2cad281e6434024ca48a9ecc94fa19d6777e9be7.1786290885.git.g@b4.vu
|
|
set_sample_rate_v2v3() returns early when the clock already reports the
requested rate:
prev_rate = get_sample_rate_v2v3(chip, fmt->iface,
fmt->altsetting, clock);
if (prev_rate == rate)
goto validation;
A device advertising exactly one sample rate always takes this branch, so
it never receives a SET_CUR for CS_SAM_FREQ_CONTROL at all.
The Mackie DLZ Creator XS (0a73:003a, 14 in / 4 out, 48 kHz only) requires
that write. Without it the device drops off the USB bus roughly 0.2-1.8 s
into any stream, clearing its port CONNECTION bit; captured audio is
byte-correct until the instant it vanishes.
USBPcap traces of a cold-booted device on Windows show SET_CUR 48000 issued
unconditionally on every stream start, followed by clean streaming. The
device is otherwise driven with plain class-compliant UAC2 - it also works
on iOS, which cannot load a vendor driver - so no vendor-specific
initialization is involved.
The device is self-powered, so the resulting state survives a USB replug:
initializing it on any host that issues the write leaves it working on
Linux until it is power-cycled, which made the failure look intermittent.
Add a quirk flag rather than dropping the early exit, since the opposite
requirement also exists in-tree: QUIRK_FLAG_FIXED_RATE suppresses rate
setting for single-rate devices (JBL Quantum610/810). The two behaviors
are device-dependent and cannot both be the default.
A/B on identically cold-booted hardware, same kernel, same port, repeated
twice:
without the flag device dropped after 5-6 s, then again after 3-4 s
with the flag 20 s playback followed by 20 s of 14-channel capture,
960000 frames, zero re-enumerations
This change was developed with an AI coding assistant. The assistant did
the trace analysis that located the bug and wrote the patch and this
changelog; the hardware testing, the cold-boot cycles and the decision to
submit were the author's. Several earlier hypotheses it proposed - URB
queue depth, isochronous packet under-allocation, endpoint start ordering -
were disproven by measurement before this one.
The bug was located with usbmon on Linux and USBPcap on Windows, by
diffing an enumeration capture of a cold-booted device on each host.
Verified on physical hardware by the A/B above.
Assisted-by: Claude-Code:claude-opus-5
Signed-off-by: JJ Macalinao <jj@macalinao.org>
Link: https://patch.msgid.link/20260808172726.1107550-1-jj@macalinao.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The recent "sticky mixer" sanity check in USB-audio driver caused a
regression on SteelSeries Arctis Nova 5 (1038:2232); because the
firmware doesn't handle GET_CUR requests, some mixers are effectively
disabled, leading to the too low / soft volumes:
usb 5-1.1: 9:0: sticky mixer values (-19712/0/256 => 0), disabling
usb 5-1.1: 10:0: sticky mixer values (-21248/0/256 => 0), disabling
Restore the functionality by ignoring GET_CUR errors intentionally
with MIXER_GET_CUR_BROKEN quirk.
Fixes: 86aa1ea1f15c ("ALSA: usb-audio: Do not expose sticky mixers")
Reported-by: Gert Burger <gertburger@gmail.com>
Closes: https://lore.kernel.org/CAEQ1D3kdA3mkQx7ei9Kq0gwky0qroJqCLKrkvgfkqgTbeu086A@mail.gmail.com
Link: https://bbs.archlinux.org/viewtopic.php?id=314220
Link: https://patch.msgid.link/20260808152258.1948767-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The recent fix for UAF in ump_to_endpoint() caused another UAF because
it tries to dereference the UMP endpoint object, but this might be
executed at a delayed context where the endpoint has been already
released.
Add private_free to clear the associated data for avoiding the further
dereference for delayed releases.
Fixes: 4a05b2d1b464 ("ALSA: usb-audio: fix use-after-free in ump_to_endpoint()")
Reported-by: syzbot+565b1138cfbe549d4422@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=565b1138cfbe549d4422
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20260808152009.1947835-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The recent fix for sticky mixer volumes caused regressions of M-audio
Fast Track Ultra device, where the mixer state is kept to the default
value.
Add the quirk entries to tolerate the broken mixer behavior. As the
device is known to work in the implicit feedback mode, explicitly
enable the implicit feedback mode, too.
Since there are two FTU models that are almost identical, both entries
are added in this patch (0763:2080 and 0763:2081).
Fixes: 86aa1ea1f15c ("ALSA: usb-audio: Do not expose sticky mixers")
Link: https://bugzilla.suse.com/show_bug.cgi?id=1273166
Link: https://patch.msgid.link/20260807083418.1712585-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
fcp_ioctl_init() allocates its response buffer with kmalloc() and copies
the whole buffer back to userspace:
buf_size = init.step0_resp_size + init.step2_resp_size;
void *resp __free(kfree) =
kmalloc(buf_size, GFP_KERNEL);
...
if (copy_to_user(arg->resp, resp, buf_size))
return -EFAULT;
Nothing clears the buffer, and the only writer of its leading
step0_resp_size bytes is the step-0 control transfer:
err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0),
FCP_USB_REQ_STEP0,
USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN,
0, private->bInterfaceNumber,
step0_resp, private->step0_resp_size);
if (err < 0)
return err;
usb_fill_control_urb() does not set URB_SHORT_NOT_OK, so a short or
zero-length data stage completes with status 0 and snd_usb_ctl_msg()
returns a small actual_length. The only check is err < 0, so a short
transfer is accepted as success.
snd_usb_ctl_msg() copies the full size back unconditionally:
buf = kmemdup(data, size, GFP_KERNEL);
...
memcpy(data, buf, size);
Bytes the device never wrote are therefore restored into resp unchanged
and copied to userspace. step0_resp_size and step2_resp_size are each
validated only to 1..255, so the caller also picks the slab cache, from
kmalloc-8 up to kmalloc-512.
On 7.2.0-rc5 (arm64), device answering step 0 with a zero-length data
stage, s0 = s2 = 255:
# init_on_alloc off, no spray
step0 window [0,255): nonzero=94/255
000: 00 80 60 06 00 00 ff ff 18 00 00 00 57 01 ea 01
010: 08 78 22 13 00 00 ff ff a8 c4 5f 80 00 80 ff ff
# same kernel, kmalloc-512 pre-seeded with an 8-byte tag
step0 window [0,255): nonzero=219/255 tagbytes=232
# identical run, init_on_alloc=1
step0 window [0,255): nonzero=0/255 tagbytes=0
# all three runs
step2 window [255,510): device words matched=62/62
a8 c4 5f 80 00 80 ff ff is the little-endian kernel text address
ffff8000805fc4a8. The step-2 window is unaffected, so the disclosure is
exactly the step-0 region.
Zero the buffer, and require the step-0 transfer to deliver the full
step0_resp_size bytes so a short data stage is reported as an error.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com>
Fixes: 46757a3e7d50 ("ALSA: FCP: Add Focusrite Control Protocol driver")
Reported-by: Federico Kirschbaum <federico.kirschbaum@xbow.com>
Reported-by: Baul Lee <baul.lee@xbow.com>
Cc: stable@vger.kernel.org
Signed-off-by: Baul Lee <baul.lee@xbow.com>
Link: https://patch.msgid.link/20260805013804.38839-1-baul.lee@xbow.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
snd_us428ctls_vm_fault() turns the faulting page offset into a kernel
address with no bound of any kind:
offset = vmf->pgoff << PAGE_SHIFT;
vaddr = (char *)(...)->us428ctls_sharedmem + offset;
page = virt_to_page(vaddr);
get_page(page);
vmf->page = page;
return 0;
snd_us428ctls_mmap() checks only the length of the mapping, never the
offset, and us428ctls_sharedmem is a single page from
alloc_pages_exact(). For a character device file_mmap_size_max()
returns ULONG_MAX, so the mm layer imposes no ceiling either. Every page
offset above zero resolves to a struct page outside the object, and the
handler installs it into the caller's address space read-write; the vma
is not marked read-only.
The caller picks the page frame with a single mmap() argument and gets
read-write access to a page of kernel memory it does not own; an offset
that lands in an unpopulated vmemmap region oopses instead.
A process that can open the hwdep node of an attached US-X2Y reaches
this after loading the FPGA image through the same node; no capability
check is involved.
On 7.2.0-rc5 (arm64), mmap() with a large offset:
Unable to handle kernel paging request at virtual address fffffdffc45d5ac8
pc : snd_us428ctls_vm_fault+0x68/0x140 [snd_usb_usx2y]
Call trace:
snd_us428ctls_vm_fault+0x68/0x140 [snd_usb_usx2y]
__do_fault
__handle_mm_fault
handle_mm_fault
el0_da
Reject any offset outside the shared region. The pcm hwdep handler in
usx2yhwdeppcm.c computes its address the same way and needs the same
bound.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Federico Kirschbaum <federico.kirschbaum@xbow.com>
Reported-by: Baul Lee <baul.lee@xbow.com>
Cc: stable@vger.kernel.org
Signed-off-by: Baul Lee <baul.lee@xbow.com>
Link: https://patch.msgid.link/20260805013445.38283-1-baul.lee@xbow.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
data_ep_set_params() sizes each URB transfer buffer before it adds the
Format Type II transfer delimiter:
u->packets = urb_packs;
u->buffer_size = maxsize * u->packets;
if (fmt->fmt_type == UAC_FORMAT_TYPE_II)
u->packets++; /* for transfer delimiter */
u->urb = usb_alloc_urb(u->packets, GFP_KERNEL);
buffer_size is computed from the pre-increment packet count and never
recomputed, so for a Type II endpoint the buffer is one packet short of
the packet count the URB is built with.
prepare_inbound_urb() then lays out one iso frame per packet and never
consults buffer_size:
offs = 0;
for (i = 0; i < urb_ctx->packets; i++) {
urb->iso_frame_desc[i].offset = offs;
urb->iso_frame_desc[i].length = ep->curpacksize;
offs += ep->curpacksize;
}
urb->transfer_buffer_length = offs;
urb->number_of_packets = urb_ctx->packets;
The last descriptor therefore points one packet past the end of the
transfer buffer, where the host controller writes device data on every
inbound transfer. prepare_silent_urb() and prepare_playback_urb() bound
their fill loops by ctx->buffer_size, so only capture is affected.
fmt_type comes from the device's audio streaming descriptors, so any
device advertising a Type II capture format hits this once userspace sets
hw_params on the stream.
KASAN on 7.2.0-rc5 (arm64) with a dummy_hcd/raw-gadget device, one report
per inbound transfer:
BUG: KASAN: slab-out-of-bounds in dummy_timer
Write of size 64 at addr ffff0000186171c0 by task cons02/166
__asan_memcpy
dummy_timer
hrtimer_run_softirq
Allocated by task 166:
usb_alloc_coherent
snd_usb_endpoint_set_params
The buggy address is located 0 bytes to the right of
allocated 64-byte region [ffff000018617180, ffff0000186171c0)
Compute buffer_size after the delimiter packet has been accounted for,
and bound the fill loop by buffer_size, as prepare_silent_urb() already
does on the outbound side. This grows every Type II URB allocation by
one maxsize packet.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com>
Fixes: 8fdff6a319e7 ("ALSA: snd-usb: implement new endpoint streaming model")
Reported-by: Federico Kirschbaum <federico.kirschbaum@xbow.com>
Reported-by: Baul Lee <baul.lee@xbow.com>
Cc: stable@vger.kernel.org
Signed-off-by: Baul Lee <baul.lee@xbow.com>
Link: https://patch.msgid.link/20260805013441.38245-1-baul.lee@xbow.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
Nguyen Ngoc Thang
Asai Neko
Xiang Mei
Kitty Makin
Takashi Iwai
Kazuki Hanai
Nick Pegg
Sebastian Dalfuß
Tristan Madani
Edward Adam Davis
Peter Drabik
HyeongJun An
Will Porter
Federico Valentín Andrade
Marouane El Moufid
Rong Zhang
Edward Blair
Chad Talbott
Lianqin Hu
Neil Andrews
Trevor Vorhees
Zhang Heng
Michal Pecio
Geoffrey D. Bennett
JJ Macalinao
Baul Lee