| Age | Commit message (Collapse) | Author | Files | Lines |
|
The IPv6 addresses used for the tun_vnet_udptnl fixture currently fall in
the 2002::/16 prefix, which is reserved for the 6to4 transition mechanism
(RFC 3056).
On systems where the sit module is loaded, the kernel automatically claims
2002::/16 as a 6to4 tunnel prefix. When the test assigns a 2002:: address
to a TUN interface, sit registers a competing local route for the same
address. This ambiguity breaks the GENEVE decapsulation path: packets
injected via the TUN fd are not delivered to the test socket, causing the
IPv6-outer gtgso send_gso_packet variants to fail.
Replace all four IPv6 test addresses with addresses from the fd00:db8::/32
range, which is part of the ULA space (fc00::/7, RFC 4193) and carries no
special kernel semantics.
Fixes: 24e59f26eef2 ("selftest: tun: Add helpers for GSO over UDP tunnel")
Signed-off-by: Ricardo B. Marlière <rbm@suse.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260706-b4-net_tun_addr-v1-1-3d3cb2473560@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
fclog.c does not compile because it is missing fcntl.h, needed for
O_RDONLY etc.
There are also some redundant includes that are also in
kselftest_harness.h.
Link: https://lore.kernel.org/20260710171741.837308-1-jkoolstra@xs4all.nl
Signed-off-by: Jori Koolstra <jkoolstra@xs4all.nl>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
PAGEMAP_SCAN reports an unpopulated pte differently depending on which
path serves the request. The PAGE_IS_WRITTEN fast path in
pagemap_scan_pmd_entry() reports a pte_none as written (and, under
PM_SCAN_WP_MATCHING, arms a marker); pagemap_page_category() returns 0 for
the same pte_none. A request that cannot take the fast path (an extra
category bit, category_anyof_mask or category_inverted) therefore reports
the pte as clean and skips arming it.
A range that was populated and then MADV_DONTNEED'd reads as written via
one mask and clean via another, and in the latter case is not re-armed for
the next round -- an incremental-dump consumer (e.g. CRIU) using a richer
mask drops the zapped range and stops tracking writes to it.
Report pte_none as written in pagemap_page_category() too. A pte_none
carries no uffd-wp marker, i.e. it is not write-protected -- the same
condition under which the present and swap cases already report
PAGE_IS_WRITTEN. The fast path applies no VMA test, so neither does this.
The hugetlb and fully-unpopulated-PMD (no page table) scans have no
PAGE_IS_WRITTEN fast path, so they do not exhibit the per-entry divergence
and are left unchanged.
Add a pagemap_ioctl selftest that populates a range, drops it with
MADV_DONTNEED, and checks that the fast path and the generic
(category_anyof_mask) path both report every page written.
Link: https://lore.kernel.org/20260707151349.92143-1-kirill@shutemov.name
Fixes: 12f6b01a0bcb ("fs/proc/task_mmu: add fast paths to get/clear PAGE_IS_WRITTEN flag")
Signed-off-by: Kiryl Shutsemau <kas@kernel.org>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Pedro Falcato <pfalcato@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Assisted-by: Claude:claude-fable-5
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The patch ("cpupower: Add generic CPPC performance display") uses
roundf() but didn't include libm explicitly. This results in build
breaks in environments where its not automatically inlined.
Add libm to the cpupower makefile to correct this.
Fixes: 68f34fad760b ("cpupower: Add generic CPPC performance display")
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The registered robust-list head has static storage but points at three
automatic lock nodes. GCC warns about storing the address of a local
variable in the static head when building the selftest with -Wall.
Give the nodes static storage as well. This keeps every object in the
circular list alive through child exit without changing the list topology.
Signed-off-by: Miles Krause <mileskrause5200@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Link: https://patch.msgid.link/20260711-futex-robust-list-static-nodes-v1-1-723754d75cf5@gmail.com
|
|
When compiling BPF selftests with -O2, GCC reports a maybe-uninitialized
warning in libarena code:
In file included from /bpf-next/tools/testing/selftests/bpf/prog_tests/libarena_asan.c:11:
In function ‘libarena_asan_init’,
inlined from ‘run_test’ at /bpf-next/tools/testing/selftests/bpf/prog_tests/libarena_asan.c:59:8,
inlined from ‘test_libarena_asan’ at /bpf-next/tools/testing/selftests/bpf/prog_tests/libarena_asan.c:91:2:
/bpf-next/tools/testing/selftests/bpf/libarena/include/libarena/userspace.h:126:14: error: ‘globals_pages’ may be used uninitialized [-Werror=maybe-uninitialized]
126 | args = (struct asan_init_args){
| ~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
127 | .arena_all_pages = arena_all_pages,
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
128 | .arena_globals_pages = globals_pages,
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
129 | };
| ~
/bpf-next/tools/testing/selftests/bpf/libarena/include/libarena/userspace.h: In function ‘test_libarena_asan’:
/bpf-next/tools/testing/selftests/bpf/libarena/include/libarena/userspace.h:118:13: note: ‘globals_pages’ was declared here
118 | u64 globals_pages;
| ^~~~~~~~~~~~~
Silence the warning by initializing globals_pages to 0.
Fixes: cfc00618b9df ("selftests/bpf: Add ASAN support for libarena selftests")
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Link: https://lore.kernel.org/bpf/9f77a5c05c3c731ab2655fd66716ab9de4478b15.1784112948.git.vmalik@redhat.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
When compiling BPF selftests with -O2, GCC reports an array bounds
violation warning in global_map_resize test:
In function ‘global_map_resize_bss_subtest’,
inlined from ‘test_global_map_resize’ at /bpf-next/tools/testing/selftests/bpf/prog_tests/global_map_resize.c:228:3:
/bpf-next/tools/testing/selftests/bpf/prog_tests/global_map_resize.c:64:33: error: array subscript 1 is above array bounds of ‘int[1]’ [-Werror=array-bounds=]
64 | skel->bss->array[i] = 1;
| ~~~~~~~~~~~~~~~~^~~
In file included from /bpf-next/tools/testing/selftests/bpf/prog_tests/global_map_resize.c:6:
./test_global_map_resize.skel.h: In function ‘test_global_map_resize’:
./test_global_map_resize.skel.h:44:21: note: while referencing ‘array’
44 | int array[1];
| ^~~~~
This is a false positive because `array` (a BPF map) has been resized
from within the BPF program. GCC doesn't know that so let us silence the
warning by accessing the array via a plain pointer.
Fixes: 08b089567573 ("libbpf: Selftests for resizing datasec maps")
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Link: https://lore.kernel.org/bpf/57765bc465a27923c3c093eba222cc24d08d8c40.1784112948.git.vmalik@redhat.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
Replace ASSERT_OK_PTR by ASSERT_NEQ(res, NULL, ...) when checking the
result of malloc. It is more accurate since malloc returns NULL, not an
error code, on failure and it also prevents the following false GCC
warning when compiling BPF selftests with -O2:
In file included from /bpf-next/tools/testing/selftests/bpf/prog_tests/sha256.c:4:
/bpf-next/tools/testing/selftests/bpf/prog_tests/sha256.c: In function ‘test_sha256’:
./test_progs.h:393:22: error: ‘data’ may be used uninitialized [-Werror=maybe-uninitialized]
393 | int ___err = libbpf_get_error(___res); \
| ^~~~~~~~~~~~~~~~~~~~~~~~
/bpf-next/tools/testing/selftests/bpf/prog_tests/sha256.c:28:14: note: in expansion of macro ‘ASSERT_OK_PTR’
28 | if (!ASSERT_OK_PTR(data, "malloc"))
| ^~~~~~~~~~~~~
In file included from /bpf-next/tools/testing/selftests/bpf/tools/include/bpf/bpf.h:32,
from ./test_progs.h:37:
/bpf-next/tools/testing/selftests/bpf/tools/include/bpf/libbpf_legacy.h:113:17: note: by argument 1 of type ‘const void *’ to ‘libbpf_get_error’ declared here
113 | LIBBPF_API long libbpf_get_error(const void *ptr);
| ^~~~~~~~~~~~~~~~
Fixes: f09f57c74677 ("selftests/bpf: Add test for libbpf_sha256()")
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Link: https://lore.kernel.org/bpf/f9dec09cca0c2aa5eeb4fdcd400a13aa19e2c073.1784112948.git.vmalik@redhat.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
Replace ASSERT_OK_PTR by ASSERT_NEQ(res, NULL, ...) when checking the
result of malloc. It is more accurate since malloc returns NULL, not an
error code, on failure and it also prevents the following false GCC
warning when compiling BPF selftests with -O2:
In file included from test_loader.c:6:
test_loader.c: In function ‘verify_stderr’:
/bpf-next/tools/testing/selftests/bpf/test_progs.h:393:22: error: ‘buf’ may be used uninitialized [-Werror=maybe-uninitialized]
393 | int ___err = libbpf_get_error(___res); \
| ^~~~~~~~~~~~~~~~~~~~~~~~
test_loader.c:810:14: note: in expansion of macro ‘ASSERT_OK_PTR’
810 | if (!ASSERT_OK_PTR(buf, "malloc"))
| ^~~~~~~~~~~~~
In file included from /bpf-next/tools/testing/selftests/bpf/tools/include/bpf/bpf.h:32,
from /bpf-next/tools/testing/selftests/bpf/test_progs.h:37:
/bpf-next/tools/testing/selftests/bpf/tools/include/bpf/libbpf_legacy.h:113:17: note: by argument 1 of type ‘const void *’ to ‘libbpf_get_error’ declared here
113 | LIBBPF_API long libbpf_get_error(const void *ptr);
| ^~~~~~~~~~~~~~~~
Fixes: 554e4eb9e4b7 ("selftests/bpf: Reuse stderr parsing for libarena ASAN tests")
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Link: https://lore.kernel.org/bpf/e25d50805fbcb3632f24b488568ab5ba49b82094.1784112948.git.vmalik@redhat.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
This test uses usleep() to delay the main thread after creating the test
thread[s] under the assumption that they already are blocked on the futex
when the main thread continues.
That "works" on otherwise idle systems, but fails under load resulting in
failed selftests because the requeue operation starts before the waiters
reached the kernel.
Replace the usleep() waits by the new thread synchronization helpers to cure that.
[ tglx: Adapted to test harness changes, fixed coding style, sanitized the
timeout handling and rewrote change log.
Co-developed-by: Edward Liaw <edliaw@google.com>
Signed-off-by: Yuwen Chen <ywen.chen@foxmail.com>
Signed-off-by: Edward Liaw <edliaw@google.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/tencent_76B9DE9C9FE5C57F6D74B5149970DF8CCF0A@qq.com
|
|
There are timing issues in the use of threads in some selftests for futexes
as the tests rely on timed waits to ensure that the other test thread[s]
reached the lock wait function in the kernel.
That "works" on halfways idle systems, but fails under load which results
in tests failing.
Provide a set of helper functions to create test threads and to wait for
them to reach the lock wait by monitoring /proc/$PID/wchan.
[ tglx: Fixup coding style, move the timeout into the helper, adapt to test
harness changes and massage change log ]
Signed-off-by: Yuwen Chen <ywen.chen@foxmail.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/tencent_4C90BE98BBC48B38B9FBC6A95C45CF49F309@qq.com
|
|
legacy_check and check_optimized are built by this Makefile via
TEST_GEN_PROGS_EXTENDED but are not listed in .gitignore, causing them
to show up as untracked files after a build.
Signed-off-by: Cihan Karadag <cihan.cihan@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260705215346.1132764-1-cihan.cihan@gmail.com
|
|
Now that the arrays of per-mode keys in struct fscrypt_master_key have
been replaced by a linked list, the definition of FSCRYPT_MODE_MAX
doesn't do anything useful. (Previously it was used to size these
arrays.) Remove it.
Link: https://patch.msgid.link/20260618231404.132829-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Looking up a prog or map by name walks the whole id space. There is a
window between bpf_prog_get_next_id()/bpf_map_get_next_id() and getting
an fd for that id in which an unrelated object can be freed, and the
lookup then fails with ENOENT and aborts the whole command.
Skip such ids and keep walking, the same way do_show() already does.
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://lore.kernel.org/bpf/20260720071520.396363-1-jiayuan.chen@linux.dev
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
The ovpn_parse_remote() function has two memory management issues:
1. When both 'host' and 'vpnip' are non-NULL, the first getaddrinfo()
allocation is leaked because 'result' is overwritten by the second
getaddrinfo() call without freeing the first allocation.
2. When both 'host' and 'vpnip' are NULL, 'result' is an uninitialized
stack variable passed to freeaddrinfo(), which is undefined behavior.
Fix by initializing 'result' to NULL and calling freeaddrinfo() after
the first getaddrinfo() result is consumed.
Fixes: 959bc330a439 ("testing/selftests: add test tool and scripts for ovpn module")
Signed-off-by: longlong yan <yanlonglong@kylinos.cn>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
|
|
The conversion to use Lark left some dead code behind. Remove them.
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/98115605a49c819adae9329823d4010bf181c3b7.1781847583.git.namcao@linutronix.de
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
The state variables (states, initial_state, final_states) only capture the
states' names and have less information than their Lark-based counterparts.
Switch to use the new state variables and delete these old ones.
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/c1e214623f83a6d8a97b6ffa54ce8ec106b11c65.1781847583.git.namcao@linutronix.de
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
Switch __create_matrix() to use the transitions parsed by Lark to avoid all
the raw text parsing.
Also stop parsing constraints in __create_matrix(), that is not used
anymore.
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/36e76b64049b7fef1cf5c2855fea310c0452ee38.1781847583.git.namcao@linutronix.de
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
Switch __get_event_variables() to use the parsed results from Lark, instead
of raw text processing.
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/03f6457b4fcaa64199ffe73edb2a9fc48e76a839.1781847583.git.namcao@linutronix.de
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
All previous users of self.invariants and self.guards have been converted
to the Lark parser, delete __parse_constraints() and its associates.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/r/b22a5a3822fe53afb8e2cf1df623a0e4c9ed5f49.1781847583.git.namcao@linutronix.de
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
Hybrid automata monitors's clock variables have been changed to have
only a single representation. Now there is no need to generate code to
convert between the two representations.
Delete __fill_convert_inv_guard_func() and its associates. Update
__start_to_invariant_check() to how invariants now work.
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/0d2a8e4bf90a9ed959289ddd2190b1152e4bbadf.1781847583.git.namcao@linutronix.de
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
Prepare to remove self.guards and self.__parse_constraints(), convert
__fill_verify_guards_func() to use the parsed transitions from Lark.
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/4f18c30b60d7c7138c0016cd6985d14a898b1eec.1781847583.git.namcao@linutronix.de
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
Prepare for self.invariants and __parse_constraints() to be removed.
convert __fill_setup_invariants_func() to use the new parsed states from
Lark.
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/1e6e95ae085b21155f9ba97359659fa231d1b803.1781847583.git.namcao@linutronix.de
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
Convert __fill_verify_invariants_func() to use the parsed states
information from Lark, prepare to remove the old raw text parsing code.
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/dce2a7dd9e9644e1c4c7ddf696c1b695b14157eb.1781847583.git.namcao@linutronix.de
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
The DOT parsing scripts directly parse the raw text and they are quite
fragile. If the input dot files' formats are slightly changed (for
instance, by breaking long some lines which is allowed by the DOT
language), the scripts would fail.
Prepare to move away from the raw text processing, implement parsers based
on Lark which parse states, transitions and constraints.
The parse results are not used yet. The existing scripts will be converted
one by one to them, and the raw text processing will eventually be removed.
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/3ef60fdb03154abb9d9718ea106484213e1a4598.1781847583.git.namcao@linutronix.de
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
The DOT parsing scripts directly parse the raw text and they are quite
fragile. If the input dot files' formats are slightly changed (for
instance, by breaking long some lines which is allowed by the DOT language
defined by graphviz), the scripts would fail.
To make the scripts robust, the parser should be implemented based on the
dot language specification, not based on how the existing dot files look.
As a first step, use Lark to implement a Parser based on the graphviz dot
language specification. The resulting parse tree is not used yet, but the
existing scripts will be converted one by one to use this new parse tree in
the follow-up commits.
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/f816bce4cc7c48d0b6b6a28a7029459df69d6a71.1781847583.git.namcao@linutronix.de
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
The LTL parser is built using Ply. However, Ply is no longer
maintained [1].
Switch to use Lark instead. In addition to being actively maintained, Lark
also offers additional features (namely, automatically creating the
abstract syntax tree) which make the parser simpler.
Link: https://github.com/dabeaz/ply/commit/9d7c40099e23ff78f9d86ef69a26c1e8a83e706a [1]
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/73d149221d96090342c7de408d032573de9cb6c4.1781847583.git.namcao@linutronix.de
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
Cross-merge networking fixes after downstream PR (net-7.2-rc4).
No conflicts.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Two unrelated things go by "cgroup" in the cid form. Sub-schedulers attach
to cgroups, and the cgroup_*() ops deliver cpu controller events. While the
ops names suggest cgroup2 hierarchy, they actually operate on the cpu
controller.
Rename them to cpuctl_* in struct sched_ext_ops_cid, which has no users
outside scx_qmap yet. The cpu form is deployed ABI and keeps the old names.
The layout is unchanged and the kernel keeps calling through the cpu-form
union view.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
SCX_OPS_OPEN() clears compat-gated ops fields which the running kernel
lacks. The clears dereference cpu-form member names and compile for
cid-form skeletons only because both ops structs currently name their
cgroup ops identically, which an upcoming rename will end. No load-time
fix-up can apply to a cid-form scheduler anyway as the cid form postdates
every compat-gated op.
Factor the skeleton open path out of SCX_OPS_OPEN() and add
SCX_OPS_CID_OPEN() which uses only that shared part. Switch scx_qmap, the
only cid-form scheduler, over.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
Add -J init-fail which makes ops.init_task() fail with -ENOMEM for tasks
whose comm starts with "qmfail", and -J cgrp-init-fail which does the same
in ops.cgroup_init() for cgroups named "qmfail*".
The former exercises the migration veto path: the cgroup.procs write must
fail with the injected errno while the destination sched stays up and the
task stays put. The latter exercises the ownership-return failure path: a
parent failing to re-init a returned cgroup leaves it unowned, and moves and
set_* ops against it must be skipped instead of dereferencing the missing
owner. Matching on "qmfail" names keeps the injecting scheduler's own enable
unaffected.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
With the set_* ops delivered to the parent's sched, a parent qmap instance
now receives cgroup_set_weight for its child subs' attach points. Update
the matching sub_sched_ctx weight and redistribute() in-kernel, and drop
the userspace feed_weights() polling. This exercises the knob routing end
to end.
The self weight is fixed at 100: a cgroup's weight is its parent's knob and
not the scheduler's own business. This drops the self-weight polling and the
repartition PROG_RUN poke with it.
sub_attach seeds the slot with the cgroup's current weight, read through
bpf_cgroup_from_id(), so a weight set before the sub attaches is picked up.
A write racing the attach can still be lost until the next value-changing
cpu.weight write. Acceptable for a demo.
While at it, add a traced ops.cgroup_move() so tests can observe move
delivery.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
When monitoring a large number of events (e.g., with wildcards such as
--event 'syscalls:sys_enter_*'), many matched events will return a count
of zero. This clutters the output, making it difficult to spot the
active events.
Add a new option --hide-zero-events to suppress printing events that
have a count of zero.
To prevent formatting and diagnostic issues, the zero-skipping logic
implements the following rules:
1. In metric-only mode (i.e., --metric-only), columns must remain
aligned in the output grid. We evaluate config->metric_only first
to avoid skipping zero-valued columns, preventing values from
shifting left and aligning under incorrect headers
2. For explicitly requested events, we ensure they are not silently
hidden if they are unsupported. We only hide a zero-count event
if counter->supported is true, ensuring that unsupported explicit
events still report "<not supported>"
Signed-off-by: Aaron Tomlin <atomlin@atomlin.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add a verifier_arena case that fills a two-page arena, calls
bpf_arena_free_pages() with a scalar address one page below the arena
base, and then verifies that another allocation is still rejected.
Before the runtime guard, the invalid free can repopulate the free
tree with an out-of-domain offset and the final allocation succeeds.
Signed-off-by: Yiyang Chen <chenyy23@mails.tsinghua.edu.cn>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/bpf/20260717-c10-031-public-bpf-next-v2-b4-v2-2-54b555443a7c@mails.tsinghua.edu.cn
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
CONFIG_IPV6_SEG6_LWTUNNEL is currently enabled in each arch-specific
config fragment for the BPF selftests. Commit 33a971d549d8
("selftests/bpf: Add LWT encap tests for skb metadata") has enabled this
config in the generic config as well, resulting in a small warning when
configuring a kernel for selftests:
$ cat tools/testing/selftests/bpf/{config,config.vm,config.x86_64}>.config
$ make olddefconfig
HOSTCC scripts/kconfig/conf.o
HOSTCC scripts/kconfig/confdata.o
HOSTLD scripts/kconfig/conf
config:269:warning: override: reassigning to symbol IPV6_SEG6_LWTUNNEL
#
# configuration written to .config
#
Now that IPV6_SEG6_LWTUNNEL is set in the general config fragment, drop
it from the arch-specific fragments.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/bpf/20260709-testing-fragments-v1-1-65244b0650ff@bootlin.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
Allocate and free arena pages, both from BPF and via user-space fault-in,
and check that the map's memlock in fdinfo tracks the number of pages that
are actually populated.
Like the other arena tests it runs serially.
test:
./test_progs -a arena_mem_usage
#5 arena_mem_usage:OK
Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/bpf/20260717114117.350851-5-jiayuan.chen@linux.dev
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
Every arena reserves a 4GB kernel vmalloc region at creation, and on a
KASAN build that eagerly populates ~512MB of shadow memory per arena. When
several arena tests run in parallel their shadow adds up, exhausts the
memory of a small CI VM and trips the OOM killer during map creation.
Make the dedicated arena tests (arena_* and libarena*) serial so they no
longer pile up in the parallel phase. That alone brings the peak number of
live arenas back within the CI memory budget.
A few other tests such as verifier_arena*, stream and compute_live_registers
create an arena too, but they run inside shared RUN_TESTS()/RUN() suites, so
turning them serial would drag many unrelated subtests along with them.
Leave those as-is.
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/bpf/20260717114117.350851-4-jiayuan.chen@linux.dev
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
It seems RISCV was added in capstone version 5 (released Jul 2023).
Unfortunately they are enum constants so cannot check with #ifdef but
anyway we can define the symbols. Let's do it using the version
number to avoid build errors. It'll fail at runtime though.
util/capstone.c: In function 'e_machine_to_capstone':
util/capstone.c:186:25: error: 'CS_ARCH_RISCV' undeclared (first use in this function);
did you mean 'CS_ARCH_SYSZ'?
186 | *arch = CS_ARCH_RISCV;
| ^~~~~~~~~~~~~
| CS_ARCH_SYSZ
util/capstone.c:186:25: note: each undeclared identifier is reported only once for each function it appears in
util/capstone.c:187:34: error: 'CS_MODE_RISCV64' undeclared (first use in this function);
did you mean 'CS_MODE_MIPS64'?
187 | *mode |= (is64 ? CS_MODE_RISCV64 : CS_MODE_RISCV32) | CS_MODE_RISCVC;
| ^~~~~~~~~~~~~~~
| CS_MODE_MIPS64
Also note that capstone renamed CS_MODE_RISCVC to CS_MODE_RISCV_C which
would cause a different build failure on latest versions. It's reported
in https://github.com/capstone-engine/capstone/issues/2977 so I think
they will add compatibility layer to prevent the error.
Fixes: 12c4737f55f2 ("perf capstone: Determine architecture from e_machine")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
In add_script_opt(), the function unconditionally increments the optstr
and act pointers for a second optional 'time' popup action before
attempting to invoke add_script_opt_2(). If the first add_script_opt_2()
call failed (for example, due to an asprintf allocation failure), this
leaves a NULL pointer gap in the options array at the prior index. When
ui__popup_menu() is later displayed, it dereferences this gap and
crashes.
Fix it by avoiding unconditional pointer increments. Only advance the
optstr and act pointers if the first script addition actually succeeded,
and safely attach the time parameter to the correct assigned action.
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
In arch__find(), if the architecture's arch_new_fn[e_machine]() returns
NULL, the error handling path attempts to read result->name, dereferencing
a NULL pointer and crashing. At the same time, it invokes free(tmp)
BEFORE updating the static global archs pointer to tmp. If the
reallocarray() call moved the allocated block, the original archs pointer
remained active but was freed. A subsequent call to arch__find() would
then pass this dangling pointer into bsearch(), causing a use-after-free.
Fix both by printing the numeric e_machine ID instead of result->name,
and updating the static global archs pointer to tmp immediately after the
successful reallocarray() invocation to safely retain the valid prior
architectures.
Closes: https://lore.kernel.org/linux-perf-users/20260709035721.9EE901F000E9@smtp.kernel.org/
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Looking at switch_data_file(), it uses the POSIX constant PATH_MAX.
Omitting the explicit inclusion of limits.h can cause build failures on
musl libc systems, which do not implicitly include headers in the same way
glibc does. Fix this by explicitly including <limits.h> at the top of
tools/perf/ui/browsers/hists.c.
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Fixes heap corruption by initializing the options and actions arrays before
the pstack allocation check, preventing an uninitialized stack pointer from
being passed to free_popup_options() if the allocation fails.
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Closes: https://lore.kernel.org/linux-perf-users/20260709035230.6DBEE1F000E9@smtp.kernel.org/
Fixes: f2b487db45f2 ("perf hists browser: Fix possible memory leak")
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/linux-perf-users/20260709035230.6DBEE1F000E9@smtp.kernel.org/
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
In evsel__hists_browse(), the 'options' and 'actions' arrays are
statically allocated on the stack with a size of MAX_OPTIONS (16).
Further down, the function sequentially calls several add_*_opt()
functions, which increment nr_options without bounds checking.
Depending on the context (e.g., branch mode, scripting, annotations),
the sum of added options can theoretically exceed 16 (potentially
reaching up to ~19). This could lead to a stack buffer overflow.
Increase MAX_OPTIONS to 32 to safely accommodate the maximum possible
number of options without risking an overflow.
Closes: https://lore.kernel.org/linux-perf-users/20260708235834.3FB771F00A3A@smtp.kernel.org/
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/linux-perf-users/20260708235834.3FB771F00A3A@smtp.kernel.org/
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
With commit 98149f542530 ("selftests/cgroup: Add test for cpuset affinity
on controller disable"), sashiko [1] reported 3 different issues with
the new test_cpuset_affinity_on_controller_disable() test.
1) `cpu_set_equal` iterates over mask bytes instead of bits, ignoring
CPUs >= 8.
2) Thread synchronization logic allows the main thread to read
uninitialized stack memory, causing test flakiness.
3) Test fails instead of skipping gracefully on uniprocessor systems
or when CPU 1 is unavailable.
Fix the reported issues by:
1) Iterates over the bit size of the mask.
2) Test the new ready flag for each thread to end the wait
on the conditional variable and eliminate the now unneeded
AFFINITY_THREAD_A_READY and AFFINITY_THREADS_READY test phases.
3) Return KSFT_SKIP on "cpuset.cpus" setting failure.
[1] https://sashiko.dev/#/patchset/20260712235510.373125-1-longman%40redhat.com
Fixes: 98149f542530 ("selftests/cgroup: Add test for cpuset affinity on controller disable")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Cross-merge BPF and other fixes after downstream PR.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
Pull bpf fixes from Kumar Kartikeya Dwivedi:
- Fix a UAF in socket clone early bailout paths (Matt Bobrowski)
- Reject unhashed UDP sockets on sockmap update to prevent refcount
leaks (Michal Luczaj)
- Account for receive queue data in FIONREAD on sockmap sockets without
a verdict program (Mattia Meleleo)
- Reject negative constant offsets for verifier buffer pointers (Sun
Jian)
- Fix for tracing of kfuncs with implicit arguments (Ihor Solodrai)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Cover tracing implicit kfunc args
bpf: Fix tracing of kfuncs with implicit args
selftests/bpf: Cover negative buffer pointer offsets
bpf: Reject negative const offsets for buffer pointers
selftests/bpf: Test FIONREAD on a sockmap socket without a verdict program
bpf, sockmap: Account for receive queue in FIONREAD without a verdict program
selftests/bpf: Fail unbound UDP on sockmap update
selftests/bpf: Adapt sockmap update error handling
bpf, sockmap: Reject unhashed UDP sockets on sockmap update
selftests/bpf: Ensure UDP sockets are bound
bpf: Fix UAF in sock clone early bailouts
|
|
Pull networking fixes from Paolo Abeni:
"Including fixes from Wireless, IPsec, Netfilter and Bluetooth.
Current release - new code bugs:
- netfilter: flowtable: use correct direction to set up tunnel route
Previous releases - regressions:
- wifi:
- mac80211:
- free AP_VLAN bc_buf SKBs outside IRQ lock
- defer link RX stats percpu free to RCU
- fix double free on alloc failure
- cfg80211: convert pmsr_free_wk to wiphy_work to fix deadlock
- ipv4: free fib_alias with kfree_rcu() on insert error path
- sched: act_tunnel_key: Defer dst_release to RCU callback
- xfrm: fix sk_dst_cache double-free in xfrm_user_policy()
- bluetooth: fix locking in unpair_device/disconnect_sync
- can: add locking for raw flags bitfield
- openvswitch: reject oversized nested action attrs
- eth:
- bnxt_en: handle partially initialized auxiliary devices
- ppp: defer channel free to an RCU grace period to fix UAF
Previous releases - always broken:
- netfilter: xt_nat: reject unsupported target families
- wifi:
- brcmfmac: fix heap overflow on a short auth frame
- cfg80211: add missing FTM API validation
- xfrm:
- reject optional IPTFS templates in outbound policies
- policy: preallocate inexact bins before xfrm_hash_rebuild reinsert
- bluetooth: revalidate LOAD_CONN_PARAM queued update
- can: fix lockless bound/ifindex race and silent RX_SETUP failure
- eth: mlx5: free mlx5_st_idx_data on final dealloc"
* tag 'net-7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (108 commits)
mpls: fix NULL deref in mpls_valid_fib_dump_req() on CONFIG_INET=n
llc: fix SAP refcount leak when creating incoming sockets
selftests: netconsole: only restore MAC when it changed on resume
bnxt_en: Handle partially initialized auxiliary devices
sctp: fix auth_hmacs array size in struct sctp_cookie
net/sched: act_tunnel_key: Defer dst_release to RCU callback
dpll: fix NULL pointer dereference in dpll_msg_add_pin_ref_sync()
tcp: fix TIME_WAIT socket reference leak on PSP policy failure
net/mlx5: free mlx5_st_idx_data on final dealloc
can: isotp: serialize TX state transitions under so->rx_lock
can: isotp: fix use-after-free race with concurrent NETDEV_UNREGISTER
can: isotp: use unconditional synchronize_rcu() in isotp_release()
can: bcm: track a single source interface for ANYDEV timeout/throttle ops
can: bcm: fix data race on rx_stamp/rx_ifindex in bcm_rx_handler()
can: bcm: fix stale rx/tx ops after device removal
can: bcm: add missing device refcount for CAN filter removal
can: bcm: validate frame length in bcm_rx_setup() for RTR replies
can: bcm: extend bcm_tx_lock usage for data and timer updates
can: bcm: add missing rcu list annotations and operations
can: bcm: fix CAN frame rx/tx statistics
...
|
|
The test_cgcore_no_internal_process_constraint_on_threads test has two
back-to-back cg_enter_current(root) calls in its cleanup path.
A single cg_enter_current() call atomically migrates the entire thread
group to the target cgroup even for multi-threaded processes, and this
test creates no extra threads or child processes that would require a
second migration attempt. The second call is a harmless no-op once the
process is already in the root cgroup, but it is redundant and
inconsistent with the cleanup logic used in all other cgroup core
selftest cases.
Remove the duplicate call to clean up the code. No functional change is
intended.
Signed-off-by: Jian Guo <guojian@kylinos.cn>
Acked-by: Michal Koutný <mkoutny@suse.com>
Tested-by: Tao Cui <cuitao@kylinos.cn>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Allocate VFIO ioctl requests dynamically instead of using VLAs. GCC 11.5.0
rejects initialized VLAs with:
error: variable-sized object may not be initialized
The replaced stack u8 arrays also do not guarantee native struct alignment
for the aliased pointers.
Fixes: 19faf6fd969c ("vfio: selftests: Add a helper library for VFIO selftests")
Fixes: 20face8c75ff ("vfio: selftests: Add helper to set/override a vf_token")
Assisted-by: Codex:gpt-5.5-high
Reviewed-by: Vipin Sharma <vipinsh@google.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Alex Mastro <amastro@fb.com>
Link: https://lore.kernel.org/r/20260617-scratch-amastro-vfio-selftests-avoid-vlas-v4-2-b9f52f1e2c5a@fb.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
|
|
Add {malloc,calloc}_assert() helpers alongside the existing *_assert()
helpers.
Use them for VFIO selftest allocations that immediately assert a
non-NULL result.
Assisted-by: Codex:gpt-5.5-high
Signed-off-by: Alex Mastro <amastro@fb.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20260617-scratch-amastro-vfio-selftests-avoid-vlas-v4-1-b9f52f1e2c5a@fb.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
|