| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Commit 846742f7e32f ("selftests: drv-net: add a warning for
bkg + shell + terminate") added a warning for bkg() used
with terminate=True. The tso test was missed as we didn't
have it running anywhere in NIPA. Add exit_wait=True, to avoid:
# Warning: combining shell and terminate is risky!
# SIGTERM may not reach the child on zsh/ksh!
getting printed twice for every variant.
Fixes: 0d0f4174f6c8 ("selftests: drv-net: add a simple TSO test")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250604012055.891431-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The device type for IPv4 GRE is "gre" not "ipgre",
unlike for IPv6 which uses "ip6gre".
Not sure how I missed this when writing the test, perhaps
because all HW I have access to is on an IPv6-only network.
Fixes: 0d0f4174f6c8 ("selftests: drv-net: add a simple TSO test")
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250604012031.891242-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add missing config options for the tso.py test, specifically
to make sure the kernel is built with vxlan and gre tunnels.
I noticed this while adding a TSO-capable device QEMU to the CI.
Previously we only run virtio tests and it doesn't report LSO
stats on the QEMU we have.
Fixes: 0d0f4174f6c8 ("selftests: drv-net: add a simple TSO test")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250604001653.853008-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Zero out the remainder in nft_pipapo AVX2 implementation, otherwise
next lookup could bogusly report a mismatch. This is followed by two
patches to update nft_pipapo selftests to cover for the previous bug.
From Florian Westphal.
2) Check for reverse tuple too in case of esoteric NAT collisions for
UDP traffic and extend selftest coverage. Also from Florian.
netfilter pull request 25-06-05
* tag 'nf-25-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
selftests: netfilter: nft_nat.sh: add test for reverse clash with nat
netfilter: nf_nat: also check reverse tuple to obtain clashing entry
selftests: netfilter: nft_concat_range.sh: add datapath check for map fill bug
selftests: netfilter: nft_concat_range.sh: prefer per element counters for testing
netfilter: nf_set_pipapo_avx2: fix initial map fill
====================
Link: https://patch.msgid.link/20250605085735.52205-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Antonio Quartulli says:
====================
In this batch you can find the following bug fixes:
Patch 1: when releasing a UDP socket we were wrongly invoking
setup_udp_tunnel_sock() with an empty config. This was not
properly shutting down the UDP encap state.
With this patch we simply undo what was done during setup.
Patch 2: ovpn was holding a reference to a 'struct socket'
without increasing its reference counter. This was intended
and worked as expected until we hit a race condition where
user space tries to close the socket while kernel space is
also releasing it. In this case the (struct socket *)->sk
member would disappear under our feet leading to a null-ptr-deref.
This patch fixes this issue by having struct ovpn_socket hold
a reference directly to the sk member while also increasing
its reference counter.
Patch 3: in case of errors along the TCP RX path (softirq)
we want to immediately delete the peer, but this operation may
sleep. With this patch we move the peer deletion to a scheduled
worker.
Patch 4 and 5 are instead fixing minor issues in the ovpn
kselftests.
* tag 'ovpn-net-20250603' of https://github.com/OpenVPN/ovpn-net-next:
selftest/net/ovpn: fix missing file
selftest/net/ovpn: fix TCP socket creation
ovpn: avoid sleep in atomic context in TCP RX error path
ovpn: ensure sk is still valid during cleanup
ovpn: properly deconfigure UDP-tunnel
====================
Link: https://patch.msgid.link/20250603111110.4575-1-antonio@openvpn.net/
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This will fail without the previous bug fix because we erronously
believe that the clashing entry went way.
However, the clash exists in the opposite direction due to an
existing nat mapping:
PASS: IP statless for ns2-LgTIuS
ERROR: failed to test udp ns1-x4iyOW to ns2-LgTIuS with dnat rule step 2, result: ""
This is partially adapted from test instructions from the below
ubuntu tracker.
Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2109889
Signed-off-by: Florian Westphal <fw@strlen.de>
Tested-by: Shaun Brady <brady.1345@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
commit 0935ee6032df ("selftests: netfilter: add test case for recent mismatch bug")
added a regression check for incorrect initial fill of the result map
that was fixed with 791a615b7ad2 ("netfilter: nf_set_pipapo: fix initial map fill").
The test used 'nft get element', i.e., control plane checks for
match/nomatch results.
The control plane however doesn't use avx2 version, so we need to
send+match packets.
As the additional packet match/nomatch is slow, don't do this for
every element added/removed: add and use maybe_send_(no)match
helpers and use them.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The selftest uses following rule:
... @test counter name "test"
Then sends a packet, then checks if the named counter did increment or
not.
This is fine for the 'no-match' test case: If anything matches the
counter increments and the test fails as expected.
But for the 'should match' test cases this isn't optimal.
Consider buggy matching, where the packet matches entry x, but it
should have matched entry y.
In that case the test would erronously pass.
Rework the selftest to use per-element counters to avoid this.
After sending packet that should have matched entry x, query the
relevant element via 'nft reset element' and check that its counter
had incremented.
The 'nomatch' case isn't altered, no entry should match so the named
counter must be 0, changing it to the per-element counter would then
pass if another entry matches.
The downside of this change is a slight increase in test run-time by
a few seconds.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
test-large-mtu.sh is referenced by the Makefile
but does not exist.
Add it along the other scripts.
Fixes: 944f8b6abab6 ("selftest/net/ovpn: extend coverage with more test cases")
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
|
|
TCP sockets cannot be created with AF_UNSPEC, but
one among the supported family must be used.
Since commit 944f8b6abab6 ("selftest/net/ovpn: extend
coverage with more test cases") the default address
family for all tests was changed from AF_INET to AF_UNSPEC,
thus breaking all TCP cases.
Restore AF_INET as default address family for TCP listeners.
Fixes: 944f8b6abab6 ("selftest/net/ovpn: extend coverage with more test cases")
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
|
|
We have the logic to include net/lib automatically for net related
selftests. However, currently, this logic is only in install target
which means only `make install` will have net/lib included. This commit
adds the logic to all target so that all `make`, `make run_tests` and
`make install` will have net/lib included in net related selftests.
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Link: https://patch.msgid.link/20250601142914.13379-1-minhquangbui99@gmail.com
Fixes: b86761ff6374 ("selftests: net: add scaffolding for Netlink tests in Python")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This reverts commit a571a9a1b120264e24b41eddf1ac5140131bfa84.
The commit in question breaks kunit for older compilers:
$ gcc --version
gcc (GCC) 11.5.0 20240719 (Red Hat 11.5.0-5)
$ ./tools/testing/kunit/kunit.py run --alltests --json --arch=x86_64
Configuring KUnit Kernel ...
Regenerating .config ...
Populating config with:
$ make ARCH=x86_64 O=.kunit olddefconfig
ERROR:root:Not all Kconfig options selected in kunitconfig were in the generated .config.
This is probably due to unsatisfied dependencies.
Missing: CONFIG_INIT_STACK_ALL_PATTERN=y
Link: https://lore.kernel.org/20250529083811.778bc31b@kernel.org
Fixes: a571a9a1b120 ("kunit: configs: Enable CONFIG_INIT_STACK_ALL_PATTERN in all_tests")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://patch.msgid.link/20250530135800.13437-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In Cilium, we use bpf_csum_diff + bpf_l4_csum_replace to, among other
things, update the L4 checksum after reverse SNATing IPv6 packets. That
use case is however not currently supported and leads to invalid
skb->csum values in some cases. This patch adds support for IPv6 address
changes in bpf_l4_csum_update via a new flag.
When calling bpf_l4_csum_replace in Cilium, it ends up calling
inet_proto_csum_replace_by_diff:
1: void inet_proto_csum_replace_by_diff(__sum16 *sum, struct sk_buff *skb,
2: __wsum diff, bool pseudohdr)
3: {
4: if (skb->ip_summed != CHECKSUM_PARTIAL) {
5: csum_replace_by_diff(sum, diff);
6: if (skb->ip_summed == CHECKSUM_COMPLETE && pseudohdr)
7: skb->csum = ~csum_sub(diff, skb->csum);
8: } else if (pseudohdr) {
9: *sum = ~csum_fold(csum_add(diff, csum_unfold(*sum)));
10: }
11: }
The bug happens when we're in the CHECKSUM_COMPLETE state. We've just
updated one of the IPv6 addresses. The helper now updates the L4 header
checksum on line 5. Next, it updates skb->csum on line 7. It shouldn't.
For an IPv6 packet, the updates of the IPv6 address and of the L4
checksum will cancel each other. The checksums are set such that
computing a checksum over the packet including its checksum will result
in a sum of 0. So the same is true here when we update the L4 checksum
on line 5. We'll update it as to cancel the previous IPv6 address
update. Hence skb->csum should remain untouched in this case.
The same bug doesn't affect IPv4 packets because, in that case, three
fields are updated: the IPv4 address, the IP checksum, and the L4
checksum. The change to the IPv4 address and one of the checksums still
cancel each other in skb->csum, but we're left with one checksum update
and should therefore update skb->csum accordingly. That's exactly what
inet_proto_csum_replace_by_diff does.
This special case for IPv6 L4 checksums is also described atop
inet_proto_csum_replace16, the function we should be using in this case.
This patch introduces a new bpf_l4_csum_replace flag, BPF_F_IPV6,
to indicate that we're updating the L4 checksum of an IPv6 packet. When
the flag is set, inet_proto_csum_replace_by_diff will skip the
skb->csum update.
Fixes: 7d672345ed295 ("bpf: add generic bpf_csum_diff helper")
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://patch.msgid.link/96a6bc3a443e6f0b21ff7b7834000e17fb549e05.1748509484.git.paul.chaignon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull bpf updates from Alexei Starovoitov:
- Fix and improve BTF deduplication of identical BTF types (Alan
Maguire and Andrii Nakryiko)
- Support up to 12 arguments in BPF trampoline on arm64 (Xu Kuohai and
Alexis Lothoré)
- Support load-acquire and store-release instructions in BPF JIT on
riscv64 (Andrea Parri)
- Fix uninitialized values in BPF_{CORE,PROBE}_READ macros (Anton
Protopopov)
- Streamline allowed helpers across program types (Feng Yang)
- Support atomic update for hashtab of BPF maps (Hou Tao)
- Implement json output for BPF helpers (Ihor Solodrai)
- Several s390 JIT fixes (Ilya Leoshkevich)
- Various sockmap fixes (Jiayuan Chen)
- Support mmap of vmlinux BTF data (Lorenz Bauer)
- Support BPF rbtree traversal and list peeking (Martin KaFai Lau)
- Tests for sockmap/sockhash redirection (Michal Luczaj)
- Introduce kfuncs for memory reads into dynptrs (Mykyta Yatsenko)
- Add support for dma-buf iterators in BPF (T.J. Mercier)
- The verifier support for __bpf_trap() (Yonghong Song)
* tag 'bpf-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (135 commits)
bpf, arm64: Remove unused-but-set function and variable.
selftests/bpf: Add tests with stack ptr register in conditional jmp
bpf: Do not include stack ptr register in precision backtracking bookkeeping
selftests/bpf: enable many-args tests for arm64
bpf, arm64: Support up to 12 function arguments
bpf: Check rcu_read_lock_trace_held() in bpf_map_lookup_percpu_elem()
bpf: Avoid __bpf_prog_ret0_warn when jit fails
bpftool: Add support for custom BTF path in prog load/loadall
selftests/bpf: Add unit tests with __bpf_trap() kfunc
bpf: Warn with __bpf_trap() kfunc maybe due to uninitialized variable
bpf: Remove special_kfunc_set from verifier
selftests/bpf: Add test for open coded dmabuf_iter
selftests/bpf: Add test for dmabuf_iter
bpf: Add open coded dmabuf iterator
bpf: Add dmabuf iterator
dma-buf: Rename debugfs symbols
bpf: Fix error return value in bpf_copy_from_user_dynptr
libbpf: Use mmap to parse vmlinux BTF from sysfs
selftests: bpf: Add a test for mmapable vmlinux BTF
btf: Allow mmap of vmlinux btf
...
|
|
Pull networking updates from Paolo Abeni:
"Core:
- Implement the Device Memory TCP transmit path, allowing zero-copy
data transmission on top of TCP from e.g. GPU memory to the wire.
- Move all the IPv6 routing tables management outside the RTNL scope,
under its own lock and RCU. The route control path is now 3x times
faster.
- Convert queue related netlink ops to instance lock, reducing again
the scope of the RTNL lock. This improves the control plane
scalability.
- Refactor the software crc32c implementation, removing unneeded
abstraction layers and improving significantly the related
micro-benchmarks.
- Optimize the GRO engine for UDP-tunneled traffic, for a 10%
performance improvement in related stream tests.
- Cover more per-CPU storage with local nested BH locking; this is a
prep work to remove the current per-CPU lock in local_bh_disable()
on PREMPT_RT.
- Introduce and use nlmsg_payload helper, combining buffer bounds
verification with accessing payload carried by netlink messages.
Netfilter:
- Rewrite the procfs conntrack table implementation, improving
considerably the dump performance. A lot of user-space tools still
use this interface.
- Implement support for wildcard netdevice in netdev basechain and
flowtables.
- Integrate conntrack information into nft trace infrastructure.
- Export set count and backend name to userspace, for better
introspection.
BPF:
- BPF qdisc support: BPF-qdisc can be implemented with BPF struct_ops
programs and can be controlled in similar way to traditional qdiscs
using the "tc qdisc" command.
- Refactor the UDP socket iterator, addressing long standing issues
WRT duplicate hits or missed sockets.
Protocols:
- Improve TCP receive buffer auto-tuning and increase the default
upper bound for the receive buffer; overall this improves the
single flow maximum thoughput on 200Gbs link by over 60%.
- Add AFS GSSAPI security class to AF_RXRPC; it provides transport
security for connections to the AFS fileserver and VL server.
- Improve TCP multipath routing, so that the sources address always
matches the nexthop device.
- Introduce SO_PASSRIGHTS for AF_UNIX, to allow disabling SCM_RIGHTS,
and thus preventing DoS caused by passing around problematic FDs.
- Retire DCCP socket. DCCP only receives updates for bugs, and major
distros disable it by default. Its removal allows for better
organisation of TCP fields to reduce the number of cache lines hit
in the fast path.
- Extend TCP drop-reason support to cover PAWS checks.
Driver API:
- Reorganize PTP ioctl flag support to require an explicit opt-in for
the drivers, avoiding the problem of drivers not rejecting new
unsupported flags.
- Converted several device drivers to timestamping APIs.
- Introduce per-PHY ethtool dump helpers, improving the support for
dump operations targeting PHYs.
Tests and tooling:
- Add support for classic netlink in user space C codegen, so that
ynl-c can now read, create and modify links, routes addresses and
qdisc layer configuration.
- Add ynl sub-types for binary attributes, allowing ynl-c to output
known struct instead of raw binary data, clarifying the classic
netlink output.
- Extend MPTCP selftests to improve the code-coverage.
- Add tests for XDP tail adjustment in AF_XDP.
New hardware / drivers:
- OpenVPN virtual driver: offload OpenVPN data channels processing to
the kernel-space, increasing the data transfer throughput WRT the
user-space implementation.
- Renesas glue driver for the gigabit ethernet RZ/V2H(P) SoC.
- Broadcom asp-v3.0 ethernet driver.
- AMD Renoir ethernet device.
- ReakTek MT9888 2.5G ethernet PHY driver.
- Aeonsemi 10G C45 PHYs driver.
Drivers:
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- refactor the steering table handling to significantly
reduce the amount of memory used
- add support for complex matches in H/W flow steering
- improve flow streeing error handling
- convert to netdev instance locking
- Intel (100G, ice, igb, ixgbe, idpf):
- ice: add switchdev support for LLDP traffic over VF
- ixgbe: add firmware manipulation and regions devlink support
- igb: introduce support for frame transmission premption
- igb: adds persistent NAPI configuration
- idpf: introduce RDMA support
- idpf: add initial PTP support
- Meta (fbnic):
- extend hardware stats coverage
- add devlink dev flash support
- Broadcom (bnxt):
- add support for RX-side device memory TCP
- Wangxun (txgbe):
- implement support for udp tunnel offload
- complete PTP and SRIOV support for AML 25G/10G devices
- Ethernet NICs embedded and virtual:
- Google (gve):
- add device memory TCP TX support
- Amazon (ena):
- support persistent per-NAPI config
- Airoha:
- add H/W support for L2 traffic offload
- add per flow stats for flow offloading
- RealTek (rtl8211): add support for WoL magic packet
- Synopsys (stmmac):
- dwmac-socfpga 1000BaseX support
- add Loongson-2K3000 support
- introduce support for hardware-accelerated VLAN stripping
- Broadcom (bcmgenet):
- expose more H/W stats
- Freescale (enetc, dpaa2-eth):
- enetc: add MAC filter, VLAN filter RSS and loopback support
- dpaa2-eth: convert to H/W timestamping APIs
- vxlan: convert FDB table to rhashtable, for better scalabilty
- veth: apply qdisc backpressure on full ring to reduce TX drops
- Ethernet switches:
- Microchip (kzZ88x3): add ETS scheduler support
- Ethernet PHYs:
- RealTek (rtl8211):
- add support for WoL magic packet
- add support for PHY LEDs
- CAN:
- Adds RZ/G3E CANFD support to the rcar_canfd driver.
- Preparatory work for CAN-XL support.
- Add self-tests framework with support for CAN physical interfaces.
- WiFi:
- mac80211:
- scan improvements with multi-link operation (MLO)
- Qualcomm (ath12k):
- enable AHB support for IPQ5332
- add monitor interface support to QCN9274
- add multi-link operation support to WCN7850
- add 802.11d scan offload support to WCN7850
- monitor mode for WCN7850, better 6 GHz regulatory
- Qualcomm (ath11k):
- restore hibernation support
- MediaTek (mt76):
- WiFi-7 improvements
- implement support for mt7990
- Intel (iwlwifi):
- enhanced multi-link single-radio (EMLSR) support on 5 GHz links
- rework device configuration
- RealTek (rtw88):
- improve throughput for RTL8814AU
- RealTek (rtw89):
- add multi-link operation support
- STA/P2P concurrency improvements
- support different SAR configs by antenna
- Bluetooth:
- introduce HCI Driver protocol
- btintel_pcie: do not generate coredump for diagnostic events
- btusb: add HCI Drv commands for configuring altsetting
- btusb: add RTL8851BE device 0x0bda:0xb850
- btusb: add new VID/PID 13d3/3584 for MT7922
- btusb: add new VID/PID 13d3/3630 and 13d3/3613 for MT7925
- btnxpuart: implement host-wakeup feature"
* tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1611 commits)
selftests/bpf: Fix bpf selftest build warning
selftests: netfilter: Fix skip of wildcard interface test
net: phy: mscc: Stop clearing the the UDPv4 checksum for L2 frames
net: openvswitch: Fix the dead loop of MPLS parse
calipso: Don't call calipso functions for AF_INET sk.
selftests/tc-testing: Add a test for HFSC eltree double add with reentrant enqueue behaviour on netem
net_sched: hfsc: Address reentrant enqueue adding class to eltree twice
octeontx2-pf: QOS: Refactor TC_HTB_LEAF_DEL_LAST callback
octeontx2-pf: QOS: Perform cache sync on send queue teardown
net: mana: Add support for Multi Vports on Bare metal
net: devmem: ncdevmem: remove unused variable
net: devmem: ksft: upgrade rx test to send 1K data
net: devmem: ksft: add 5 tuple FS support
net: devmem: ksft: add exit_wait to make rx test pass
net: devmem: ksft: add ipv4 support
net: devmem: preserve sockc_err
page_pool: fix ugly page_pool formatting
net: devmem: move list_add to net_devmem_bind_dmabuf.
selftests: netfilter: nft_queue.sh: include file transfer duration in log message
net: phy: mscc: Fix memory leak when using one step timestamping
...
|
|
Pull arm64 updates from Will Deacon:
"The headline feature is the re-enablement of support for Arm's
Scalable Matrix Extension (SME) thanks to a bumper crop of fixes
from Mark Rutland.
If matrices aren't your thing, then Ryan's page-table optimisation
work is much more interesting.
Summary:
ACPI, EFI and PSCI:
- Decouple Arm's "Software Delegated Exception Interface" (SDEI)
support from the ACPI GHES code so that it can be used by platforms
booted with device-tree
- Remove unnecessary per-CPU tracking of the FPSIMD state across EFI
runtime calls
- Fix a node refcount imbalance in the PSCI device-tree code
CPU Features:
- Ensure register sanitisation is applied to fields in ID_AA64MMFR4
- Expose AIDR_EL1 to userspace via sysfs, primarily so that KVM
guests can reliably query the underlying CPU types from the VMM
- Re-enabling of SME support (CONFIG_ARM64_SME) as a result of fixes
to our context-switching, signal handling and ptrace code
Entry code:
- Hook up TIF_NEED_RESCHED_LAZY so that CONFIG_PREEMPT_LAZY can be
selected
Memory management:
- Prevent BSS exports from being used by the early PI code
- Propagate level and stride information to the low-level TLB
invalidation routines when operating on hugetlb entries
- Use the page-table contiguous hint for vmap() mappings with
VM_ALLOW_HUGE_VMAP where possible
- Optimise vmalloc()/vmap() page-table updates to use "lazy MMU mode"
and hook this up on arm64 so that the trailing DSB (used to publish
the updates to the hardware walker) can be deferred until the end
of the mapping operation
- Extend mmap() randomisation for 52-bit virtual addresses (on par
with 48-bit addressing) and remove limited support for
randomisation of the linear map
Perf and PMUs:
- Add support for probing the CMN-S3 driver using ACPI
- Minor driver fixes to the CMN, Arm-NI and amlogic PMU drivers
Selftests:
- Fix FPSIMD and SME tests to align with the freshly re-enabled SME
support
- Fix default setting of the OUTPUT variable so that tests are
installed in the right location
vDSO:
- Replace raw counter access from inline assembly code with a call to
the the __arch_counter_get_cntvct() helper function
Miscellaneous:
- Add some missing header inclusions to the CCA headers
- Rework rendering of /proc/cpuinfo to follow the x86-approach and
avoid repeated buffer expansion (the user-visible format remains
identical)
- Remove redundant selection of CONFIG_CRC32
- Extend early error message when failing to map the device-tree
blob"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (83 commits)
arm64: cputype: Add cputype definition for HIP12
arm64: el2_setup.h: Make __init_el2_fgt labels consistent, again
perf/arm-cmn: Add CMN S3 ACPI binding
arm64/boot: Disallow BSS exports to startup code
arm64/boot: Move global CPU override variables out of BSS
arm64/boot: Move init_pgdir[] and init_idmap_pgdir[] into __pi_ namespace
perf/arm-cmn: Initialise cmn->cpu earlier
kselftest/arm64: Set default OUTPUT path when undefined
arm64: Update comment regarding values in __boot_cpu_mode
arm64: mm: Drop redundant check in pmd_trans_huge()
arm64/mm: Re-organise setting up FEAT_S1PIE registers PIRE0_EL1 and PIR_EL1
arm64/mm: Permit lazy_mmu_mode to be nested
arm64/mm: Disable barrier batching in interrupt contexts
arm64/cpuinfo: only show one cpu's info in c_show()
arm64/mm: Batch barriers when updating kernel mappings
mm/vmalloc: Enter lazy mmu mode while manipulating vmalloc ptes
arm64/mm: Support huge pte-mapped pages in vmap
mm/vmalloc: Gracefully unmap huge ptes
mm/vmalloc: Warn on improper use of vunmap_range()
arm64/mm: Hoist barriers out of set_ptes_anysz() loop
...
|
|
Pull nfsd updates from Chuck Lever:
"The marquee feature for this release is that the limit on the maximum
rsize and wsize has been raised to 4MB. The default remains at 1MB,
but risk-seeking administrators now have the ability to try larger I/O
sizes with NFS clients that support them. Eventually the default
setting will be increased when we have confidence that this change
will not have negative impact.
With v6.16, NFSD now has its own debugfs file system where we can add
experimental features and make them available outside of our
development community without impacting production deployments. The
first experimental setting added is one that makes all NFS READ
operations use vfs_iter_read() instead of the NFSD splice actor. The
plan is to eventually retire the splice actor, as that will enable a
number of new capabilities such as the use of struct bio_vec from the
top to the bottom of the NFSD stack.
Jeff Layton contributed a number of observability improvements. The
use of dprintk() in a number of high-traffic code paths has been
replaced with static trace points.
This release sees the continuation of efforts to harden the NFSv4.2
COPY operation. Soon, the restriction on async COPY operations can be
lifted.
Many thanks to the contributors, reviewers, testers, and bug reporters
who participated during the v6.16 development cycle"
* tag 'nfsd-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (60 commits)
xdrgen: Fix code generated for counted arrays
SUNRPC: Bump the maximum payload size for the server
NFSD: Add a "default" block size
NFSD: Remove NFSSVC_MAXBLKSIZE_V2 macro
NFSD: Remove NFSD_BUFSIZE
sunrpc: Remove the RPCSVC_MAXPAGES macro
svcrdma: Adjust the number of entries in svc_rdma_send_ctxt::sc_pages
svcrdma: Adjust the number of entries in svc_rdma_recv_ctxt::rc_pages
sunrpc: Adjust size of socket's receive page array dynamically
SUNRPC: Remove svc_rqst :: rq_vec
SUNRPC: Remove svc_fill_write_vector()
NFSD: Use rqstp->rq_bvec in nfsd_iter_write()
SUNRPC: Export xdr_buf_to_bvec()
NFSD: De-duplicate the svc_fill_write_vector() call sites
NFSD: Use rqstp->rq_bvec in nfsd_iter_read()
sunrpc: Replace the rq_bvec array with dynamically-allocated memory
sunrpc: Replace the rq_pages array with dynamically-allocated memory
sunrpc: Remove backchannel check in svc_init_buffer()
sunrpc: Add a helper to derive maxpages from sv_max_mesg
svcrdma: Reduce the number of rdma_rw contexts per-QP
...
|
|
Pull seccomp updates from Kees Cook:
- selftest fixes for arm32 (Neill Kapron, Terry Tritton)
- documentation typo fix (Sumanth Gavini)
* tag 'seccomp-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
selftests: seccomp: Fix "performace" to "performance"
selftests/seccomp: fix negative_ENOSYS tracer tests on arm32
selftests/seccomp: fix syscall_restart test for arm compat
|
|
Merge in late fixes to prepare for the 6.16 net-next PR.
No conflicts nor adjacent changes.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
On linux-next, build for bpf selftest displays a warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/if_xdp.h'
differs from latest version at 'include/uapi/linux/if_xdp.h'.
Commit 8066e388be48 ("net: add UAPI to the header guard in various network headers")
changed the header guard from _LINUX_IF_XDP_H to _UAPI_LINUX_IF_XDP_H
in include/uapi/linux/if_xdp.h.
To resolve the warning, update tools/include/uapi/linux/if_xdp.h
to align with the changes in include/uapi/linux/if_xdp.h
Fixes: 8066e388be48 ("net: add UAPI to the header guard in various network headers")
Reported-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Closes: https://lore.kernel.org/all/c2bc466d-dff2-4d0d-a797-9af7f676c065@linux.ibm.com/
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Saket Kumar Bhaskar <skb99@linux.ibm.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://patch.msgid.link/20250527054138.1086006-1-skb99@linux.ibm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The script is supposed to skip wildcard interface testing if unsupported
by the host's nft tool. The failing check caused script abort due to
'set -e' though. Fix this by running the potentially failing nft command
inside the if-conditional pipe.
Fixes: 73db1b5dab6f ("selftests: netfilter: Torture nftables netdev hooks")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Link: https://patch.msgid.link/20250527094117.18589-1-phil@nwl.cc
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Reproduce the UAF scenario where netem is a child of HFSC and HFSC
is configured to use the eltree. In such case, this TDC test would
cause the HFSC class to be added to the eltree twice resulting
in a UAF.
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Link: https://patch.msgid.link/20250522181448.1439717-3-pctammela@mojatatu.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Pull sched_ext updates from Tejun Heo:
- More in-kernel idle CPU selection improvements. Expand topology
awareness coverage add scx_bpf_select_cpu_and() to allow more
flexibility. The idle CPU selection kfuncs can now be called from
unlocked contexts too.
- A bunch of reorganization changes to lay the foundation for multiple
hierarchical scheduler support. This isn't ready yet and the included
changes don't make meaningful behavior differences. One notable
change is replacing some static_key tests with dynamic tests as the
test results may differ depending on the scheduler instance. This
isn't expected to cause meaningful performance difference.
- Other minor and doc updates.
- There were multiple patches in for-6.15-fixes which conflicted with
changes in for-6.16. for-6.15-fixes were pulled three times into
for-6.16 to resolve the conflicts.
* tag 'sched_ext-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext: (49 commits)
sched_ext: Call ops.update_idle() after updating builtin idle bits
sched_ext, docs: convert mentions of "CFS" to "fair-class scheduler"
selftests/sched_ext: Update test enq_select_cpu_fails
sched_ext: idle: Consolidate default idle CPU selection kfuncs
selftests/sched_ext: Add test for scx_bpf_select_cpu_and() via test_run
sched_ext: idle: Allow scx_bpf_select_cpu_and() from unlocked context
sched_ext: idle: Validate locking correctness in scx_bpf_select_cpu_and()
sched_ext: Make scx_kf_allowed_if_unlocked() available outside ext.c
sched_ext, docs: add label
sched_ext: Explain the temporary situation around scx_root dereferences
sched_ext: Add @sch to SCX_CALL_OP*()
sched_ext: Cleanup [__]scx_exit/error*()
sched_ext: Add @sch to SCX_CALL_OP*()
sched_ext: Clean up scx_root usages
Documentation: scheduler: Changed lowercase acronyms to uppercase
sched_ext: Avoid NULL scx_root deref in __scx_exit()
sched_ext: Add RCU protection to scx_root in DSQ iterator
sched_ext: Clean up SCX_EXIT_NONE handling in scx_disable_workfn()
sched_ext: Move disable machinery into scx_sched
sched_ext: Move event_stats_cpu into scx_sched
...
|
|
Pull cgroup updates from Tejun Heo:
- cgroup rstat shared the tracking tree across all controllers with the
rationale being that a cgroup which is using one resource is likely
to be using other resources at the same time (ie. if something is
allocating memory, it's probably consuming CPU cycles).
However, this turned out to not scale very well especially with memcg
using rstat for internal operations which made memcg stat read and
flush patterns substantially different from other controllers. JP
Kobryn split the rstat tree per controller.
- cgroup BPF support was hooking into cgroup init/exit paths directly.
Convert them to use a notifier chain instead so that other usages can
be added easily. The two of the patches which implement this are
mislabeled as belonging to sched_ext instead of cgroup. Sorry.
- Relatively minor cpuset updates
- Documentation updates
* tag 'cgroup-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (23 commits)
sched_ext: Convert cgroup BPF support to use cgroup_lifetime_notifier
sched_ext: Introduce cgroup_lifetime_notifier
cgroup: Minor reorganization of cgroup_create()
cgroup, docs: cpu controller's interaction with various scheduling policies
cgroup, docs: convert space indentation to tab indentation
cgroup: avoid per-cpu allocation of size zero rstat cpu locks
cgroup, docs: be specific about bandwidth control of rt processes
cgroup: document the rstat per-cpu initialization
cgroup: helper for checking rstat participation of css
cgroup: use subsystem-specific rstat locks to avoid contention
cgroup: use separate rstat trees for each subsystem
cgroup: compare css to cgroup::self in helper for distingushing css
cgroup: warn on rstat usage by early init subsystems
cgroup/cpuset: drop useless cpumask_empty() in compute_effective_exclusive_cpumask()
cgroup/rstat: Improve cgroup_rstat_push_children() documentation
cgroup: fix goto ordering in cgroup_init()
cgroup: fix pointer check in css_rstat_init()
cgroup/cpuset: Add warnings to catch inconsistency in exclusive CPUs
cgroup/cpuset: Fix obsolete comment in cpuset_css_offline()
cgroup/cpuset: Always use cpu_active_mask
...
|
|
Pull sysctl updates from Joel Granados:
- Move kern_table members out of kernel/sysctl.c
Moved a subset (tracing, panic, signal, stack_tracer and sparc) out
of the kern_table array. The goal is for kern_table to only have
sysctl elements. All this increases modularity by placing the
ctl_tables closer to where they are used while reducing the chances
of merge conflicts in kernel/sysctl.c.
- Fixed sysctl unit test panic by relocating it to selftests
* tag 'sysctl-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl:
sysctl: Close test ctl_headers with a for loop
sysctl: call sysctl tests with a for loop
sysctl: Add 0012 to test the u8 range check
sysctl: move u8 register test to lib/test_sysctl.c
sparc: mv sparc sysctls into their own file under arch/sparc/kernel
stack_tracer: move sysctl registration to kernel/trace/trace_stack.c
tracing: Move trace sysctls into trace.c
signal: Move signal ctl tables into signal.c
panic: Move panic ctl tables into panic.c
|
|
This variable is unused and can be removed.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250523230524.1107879-9-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The current test just sends "hello\nworld" and verifies that is the
string received on the RX side. That is fine, but improve the test a bit
by sending 1K data. The test should be improved further to send more
data, but for now this should be a welcome improvement.
The test will send a repeating pattern of 0x01, 0x02, ... 0x06. The
ncdevmem `-v 7` flag will verify this pattern. ncdevmem will provide
useful debugging info when the test fails, such as the frags received
and verified fine, and which frag exactly failed, what was the expected
byte pattern, and what is the actual byte pattern received. All this
debug information will be useful when the test fails.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250523230524.1107879-8-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ncdevmem supports drivers that are limited to either 3-tuple or 5-tuple
FS support, but the ksft is currently 3-tuple only. Support drivers that
have 5-tuple FS supported by adding a ksft arg.
Signed-off-by: Mina Almasry <almasrymina@google.com>
fix 5-tuple
fix 5-tuple
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250523230524.1107879-7-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This exit_wait seems necessary to make the rx side test pass for me.
I think this is just missed from the original test add patch. Add it now.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250523230524.1107879-6-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ncdevmem supports both ipv4 and ipv6, but the ksft is currently
ipv6-only. Propagate the ipv4 support to the ksft, so that folks that
are limited to these networks can also test.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250523230524.1107879-5-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Paolo Abeni says:
Recently the nipa CI infra went through some tuning, and the mentioned
self-test now often fails.
The failing test is the sctp+nfqueue one, where the file transfer takes
too long and hits the timeout (1 minute).
Because SCTP nfqueue tests had timeout related issues before (esp. on debug
kernels) print the file transfer duration in the PASS/FAIL message.
This would aallow us to see if there is/was an unexpected slowdown
(CI keeps logs around) or 'creeping slowdown' where things got slower
over time until 'fail point' was reached.
Output of altered lines looks like this:
PASS: tcp and nfqueue in forward chan (duration: 2s)
PASS: tcp via loopback (duration: 2s)
PASS: sctp and nfqueue in forward chain (duration: 42s)
PASS: sctp and nfqueue in output chain with GSO (duration: 21s)
Reported-by: Paolo Abeni <pabeni@redhat.com
Closes: https://lore.kernel.org/netdev/584524ef-9fd7-4326-9f1b-693ca62c5692@redhat.com/
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/20250523121700.20011-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The function wait_local_port_listen() is the only function defined in
net_helper.sh. Since some tests source both lib.sh and net_helper.sh,
we can simplify the setup by moving wait_local_port_listen() to lib.sh.
With this change, net_helper.sh becomes redundant and can be removed.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250526014600.9128-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extend the Python YNL extack decoding to handle sub-messages in the same
way that YNL C does. This involves retaining the input values so that
they are available during extack decoding.
./tools/net/ynl/pyynl/cli.py --family rt-link --do newlink --create \
--json '{
"linkinfo": {"kind": "netkit", "data": {"policy": 10} }
}'
Netlink error: Invalid argument
nl_len = 92 (76) nl_flags = 0x300 nl_type = 2
error: -22
extack: {'msg': 'Provided default xmit policy not supported', 'bad-attr': '.linkinfo.data(netkit).policy'}
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250523103031.80236-1-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull power management updates from Rafael Wysocki:
"Once again, the changes are dominated by cpufreq updates, but this
time the majority of them are cpufreq core changes, mostly related to
the introduction of policy locking guards and __free() usage, and
fixes related to boost handling.
Still, there is also a significant update of the intel_pstate driver
making it register an energy model when running on a hybrid platform
which is used for enabling energy-aware scheduling (EAS) if the driver
operates in the passive mode (and schedutil is used as the cpufreq
governor for all CPUs which is the passive mode default).
There are some amd-pstate driver updates too, for a good measure,
including the "Requested CPU Min frequency" BIOS option support and
new online/offline callbacks.
In the cpuidle space, the most significant change is the addition of a
C1 demotion on/off sysfs knob to intel_idle which should help some
users to configure their systems more precisely. There is also the
conversion of the PSCI cpuidle driver to a faux device one and there
are two small updates of cpuidle governors.
Device power management is also modified quite a bit, especially the
handling of devices with asynchronous suspend and resume enabled
during system transitions. They are now going to be handled more
asynchronously during suspend transitions and somewhat less
aggressively during resume transitions.
Apart from the above, the operating performance points (OPP) library
is now going to use mutex locking guards and scope-based cleanup
helpers and there is the usual bunch of assorted fixes and code
cleanups.
Specifics:
- Fix potential division-by-zero error in em_compute_costs() (Yaxiong
Tian)
- Fix typos in energy model documentation and example driver code
(Moon Hee Lee, Atul Kumar Pant)
- Rearrange the energy model management code and add a new function
for adjusting a CPU energy model after adjusting the capacity of
the given CPU to it (Rafael Wysocki)
- Refactor cpufreq_online(), add and use cpufreq policy locking
guards, use __free() in policy reference counting, and clean up
core cpufreq code on top of that (Rafael Wysocki)
- Fix boost handling on CPU suspend/resume and sysfs updates (Viresh
Kumar)
- Fix des_perf clamping with max_perf in amd_pstate_update()
(Dhananjay Ugwekar)
- Add offline, online and suspend callbacks to the amd-pstate driver,
rename and use the existing amd_pstate_epp callbacks in it
(Dhananjay Ugwekar)
- Add support for the "Requested CPU Min frequency" BIOS option to
the amd-pstate driver (Dhananjay Ugwekar)
- Reset amd-pstate driver mode after running selftests (Swapnil
Sapkal)
- Avoid shadowing ret in amd_pstate_ut_check_driver() (Nathan
Chancellor)
- Add helper for governor checks to the schedutil cpufreq governor
and move cpufreq-specific EAS checks to cpufreq (Rafael Wysocki)
- Populate the cpu_capacity sysfs entries from the intel_pstate
driver after registering asym capacity support (Ricardo Neri)
- Add support for enabling Energy-aware scheduling (EAS) to the
intel_pstate driver when operating in the passive mode on a hybrid
platform (Rafael Wysocki)
- Drop redundant cpus_read_lock() from store_local_boost() in the
cpufreq core (Seyediman Seyedarab)
- Replace sscanf() with kstrtouint() in the cpufreq code and use a
symbol instead of a raw number in it (Bowen Yu)
- Add support for autonomous CPU performance state selection to the
CPPC cpufreq driver (Lifeng Zheng)
- OPP: Add dev_pm_opp_set_level() (Praveen Talari)
- Introduce scope-based cleanup headers and mutex locking guards in
OPP core (Viresh Kumar)
- Switch OPP to use kmemdup_array() (Zhang Enpei)
- Optimize bucket assignment when next_timer_ns equals KTIME_MAX in
the menu cpuidle governor (Zhongqiu Han)
- Convert the cpuidle PSCI driver to a faux device one (Sudeep Holla)
- Add C1 demotion on/off sysfs knob to the intel_idle driver (Artem
Bityutskiy)
- Fix typos in two comments in the teo cpuidle governor (Atul Kumar
Pant)
- Fix denying of auto suspend in pm_suspend_timer_fn() (Charan Teja
Kalla)
- Move debug runtime PM attributes to runtime_attrs[] (Rafael
Wysocki)
- Add new devm_ functions for enabling runtime PM and runtime PM
reference counting (Bence Csókás)
- Remove size arguments from strscpy() calls in the hibernation core
code (Thorsten Blum)
- Adjust the handling of devices with asynchronous suspend enabled
during system suspend and resume to start resuming them immediately
after resuming their parents and to start suspending such a device
immediately after suspending its first child (Rafael Wysocki)
- Adjust messages printed during tasks freezing to avoid using
pr_cont() (Andrew Sayers, Paul Menzel)
- Clean up unnecessary usage of !! in pm_print_times_init() (Zihuan
Zhang)
- Add missing wakeup source attribute relax_count to sysfs and remove
the space character at the end ofi the string produced by
pm_show_wakelocks() (Zijun Hu)
- Add configurable pm_test delay for hibernation (Zihuan Zhang)
- Disable asynchronous suspend in ucsi_ccg_probe() to prevent the
cypd4226 device on Tegra boards from suspending prematurely (Jon
Hunter)
- Unbreak printing PM debug messages during hibernation and clean up
some related code (Rafael Wysocki)
- Add a systemd service to run cpupower and change cpupower binding's
Makefile to use -lcpupower (John B. Wyatt IV, Francesco Poli)"
* tag 'pm-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (72 commits)
cpufreq: CPPC: Add support for autonomous selection
cpufreq: Update sscanf() to kstrtouint()
cpufreq: Replace magic number
OPP: switch to use kmemdup_array()
PM: freezer: Rewrite restarting tasks log to remove stray *done.*
PM: runtime: fix denying of auto suspend in pm_suspend_timer_fn()
cpufreq: drop redundant cpus_read_lock() from store_local_boost()
cpupower: do not install files to /etc/default/
cpupower: do not call systemctl at install time
cpupower: do not write DESTDIR to cpupower.service
PM: sleep: Introduce pm_sleep_transition_in_progress()
cpufreq/amd-pstate: Avoid shadowing ret in amd_pstate_ut_check_driver()
cpufreq: intel_pstate: Document hybrid processor support
cpufreq: intel_pstate: EAS: Increase cost for CPUs using L3 cache
cpufreq: intel_pstate: EAS support for hybrid platforms
PM: EM: Introduce em_adjust_cpu_capacity()
PM: EM: Move CPU capacity check to em_adjust_new_capacity()
PM: EM: Documentation: Fix typos in example driver code
cpufreq: Drop policy locking from cpufreq_policy_is_good_for_eas()
PM: sleep: Introduce pm_suspend_in_progress()
...
|
|
Pull ACPI updates from Rafael Wysocki:
"The most significant part of these changes is an ACPICA update
covering two upstream ACPICA releases, 20241212 and 20250404, that
have not been included into the kernel code base yet.
Among other things, it adds definitions needed to address GCC 15's
-Wunterminated-string-initialization warnings, adds support for three
new tables (MRRM, ERDT, RIMT), extends support for two tables (RAS2,
DMAR), and fixes some issues.
On top of the above, there is a new parser for the MRRM table, more
changes related to GCC 15's -Wunterminated-string-initialization
warnings, a CPPC library update including functions related to
autonomous CPU performance state selection, a couple of new quirks,
some assorted fixes and some code cleanups.
Specifics:
- Fix two ACPICA SLAB cache leaks (Seunghun Han)
- Add EINJv2 get error type action and define Error Injection Actions
in hex values to avoid inconsistencies between the specification
and the code (Zaid Alali)
- Fix typo in comments for SRAT structures (Adam Lackorzynski)
- Prevent possible loss of data in ACPICA because of u32 to u8
conversions (Saket Dumbre)
- Fix reading FFixedHW operation regions in ACPICA (Daniil Tatianin)
- Add support for printing AML arguments when the ACPICA debug level
is ACPI_LV_TRACE_POINT (Mario Limonciello)
- Drop a stale comment about the file content from actbl2.h (Sudeep
Holla)
- Apply pack(1) to union aml_resource (Tamir Duberstein)
- Fix overflow check in the ACPICA version of vsnprintf() (gldrk)
- Interpret SIDP structures in DMAR added revision 3.4 of the VT-d
specification (Alexey Neyman)
- Add typedef and other definitions related to MRRM to ACPICA (Tony
Luck)
- Add definitions for RIMT to ACPICA (Sunil V L)
- Fix spelling mistake "Incremement" -> "Increment" in the ACPICA
utilities code (Colin Ian King)
- Add typedef and other definitions for ERDT to ACPICA (Tony Luck)
- Introduce ACPI_NONSTRING and use it (Kees Cook, Ahmed Salem)
- Rename structure and field names of the RAS2 table in actbl2.h
(Shiju Jose)
- Fix up whitespace in acpica/utcache.c (Zhe Qiao)
- Avoid sequence overread in a call to strncmp() in
ap_get_table_length() and replace strncpy() with memcpy() in ACPICA
in some places (Ahmed Salem)
- Update copyright year in all ACPICA files (Saket Dumbre)
- Add __nonstring annotations for unterminated strings in the static
ACPI tables parsing code (Kees Cook)
- Add support for parsing the MRRM ACPI table and sysfs files to
describe memory regions listed in it (Tony Luck, Anil
Keshavamurthy)
- Remove an (explicitly) unused header file include from the VIOT
ACPI table parser file (Andy Shevchenko)
- Improve logging around acpi_initialize_tables() (Bartosz
Szczepanek)
- Clean up the initialization of CPU data structures in the ACPI
processor driver (Zhang Rui)
- Remove an obsolete comment regarding the C-states handling in the
ACPI processor driver (Giovanni Gherdovich)
- Simplify PCC shared memory region handling (Sudeep Holla)
- Rework and extend functions for reading CPPC register values and
for updating CPPC registers (Lifeng Zheng)
- Add three functions related to autonomous CPU performance state
selection to the CPPC library (Lifeng Zheng)
- Turn the acpi_pci_root_remap_iospace() fwnode_handle parameter into
a const pointer (Pei Xiao)
- Round battery capacity percengate in the ACPI battery driver to the
closest integer to avoid user confusion (shitao)
- Make the ACPI battery driver report the current as a negative
number to the power supply framework when the battery is
discharging as documented (Peter Marheine)
- Add TUXEDO InfinityBook Pro AMD Gen9 to the acpi_ec_no_wakeup[]
list to prevent spurious wakeups from suspend-to-idle (Werner
Sembach)
- Convert the APEI EINJ driver to a faux device one (Sudeep Holla,
Jon Hunter)
- Remove redundant calls to einj_get_available_error_type() from the
APEI EINJ driver (Zaid Alali)
- Fix a typo for MECHREVO in irq1_edge_low_force_override[] (Mingcong
Bai)
- Add an LPS0 check() callback to the AMD pinctrl driver and fix up
config symbol dependencies in it (Mario Limonciello, Rafael
Wysocki)
- Avoid initializing the ACPI platform profile driver on non-ACPI
platforms (Alexandre Ghiti)
- Document that references to ACPI data (non-device) nodes should use
string-only references in hierarchical data node packages (Sakari
Ailus)
- Fail the ACPI bus registration if acpi_kobj registration fails
(Armin Wolf)"
* tag 'acpi-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (65 commits)
ACPI: MRRM: Fix default max memory region
ACPI: bus: Bail out if acpi_kobj registration fails
ACPI: platform_profile: Avoid initializing on non-ACPI platforms
pinctrl: amd: Fix hibernation support with CONFIG_SUSPEND unset
ACPI: tables: Improve logging around acpi_initialize_tables()
ACPI: VIOT: Remove (explicitly) unused header
ACPI: Add documentation for exposing MRRM data
ACPI: MRRM: Add /sys files to describe memory ranges
ACPI: MRRM: Minimal parse of ACPI MRRM table
ACPICA: Update copyright year
ACPICA: Logfile: Changes for version 20250404
ACPICA: Replace strncpy() with memcpy()
ACPICA: Apply ACPI_NONSTRING in more places
ACPICA: Avoid sequence overread in call to strncmp()
ACPICA: Adjust the position of code lines
ACPICA: actbl2.h: ACPI 6.5: RAS2: Rename structure and field names of the RAS2 table
ACPICA: Apply ACPI_NONSTRING
ACPICA: Introduce ACPI_NONSTRING
ACPICA: actbl2.h: ERDT: Add typedef and other definitions
ACPICA: infrastructure: Add new DMT_BUF types and shorten a long name
...
|
|
Pull gpio updates from Bartosz Golaszewski:
"We have three new drivers, some refactoring in the GPIO core, lots of
various changes across many drivers, new configfs interface for the
virtual gpio-aggregator module and DT-bindings updates.
The treewide conversion of GPIO drivers to using the new value setter
callbacks is ongoing with another round of GPIO drivers updated. You
will also see these commits coming in from other subsystems as with
the relevant changes merged into mainline last cycle, I've started
converting GPIO providers located elsewhere than drivers/gpio/.
GPIO core:
- use more lock guards where applicable
- refactor GPIO ACPI code and shrink it in the process by 8%
- move GPIO ACPI quirks into a separate file
- remove unneeded #ifdef
- convert GPIO devres helpers to using devm_add_action() where
applicable which shrinks and simplifies the code
- refactor GPIO descriptor validation in GPIO consumer interfaces
- don't allow setting values on input lines in the GPIO core which
will take off the burden from GPIO drivers of checking this down
the line
- provide gpiod_is_equal() as a way of safely comparing two GPIO
descriptors (the only current user is in regulator core)
New drivers:
- add the GPIO module for the max77759 multifunction device
- add the GPIO driver for the VeriSilicon BLZP1600 GPIO controller
- add the GPIO driver for the Spacemit K1 SoC
Driver improvements:
- convert more drivers to using the new GPIO line value setter
callbacks
- convert more drivers to making the irq_chip immutable as is
recommended by the interrupt subsystem
- extend build testing coverage by enabling more modules to be built
with COMPILE_TEST=y
- extend the gpio-aggregator module with a configfs interface that
makes the setup easier for user-space than the existing
driver-level sysfs attributes and also adds more advanced
configuration features (such as referring to aggregated lines by
their original names or modifying their names as exposed by the
aggregated chip)
- add a missing mutex_destroy() in gpio-imx-scu
- add an OF polarity quirk for s5m8767
- allow building gpio-vf610 as a loadable module
- make gpio-mxc not hardcode its GPIO base number with GPIO SYSFS
interface disabled (another small step towards getting rid of the
global GPIO numberspace)
- add support for level-triggered interrupts to gpio-pca953x
- don't double-check the ngpios property in gpio-ds4520 as GPIO core
already does it
- don't double-check the number of GPIOs in gpio-imx-scu as GPIO core
already does it
- remove unused callbacks from gpio-max3191x
DT bindings:
- add device-tree bindings for max77759, spacemit,k1 and blzp1600
(new drivers added this cycle)
- document more properties for gpio-vf610 and gpio-tegra186
- document a new pca95xx variant
- fix style of examples in several GPIO DT-binding documents
Misc:
- TODO list updates"
* tag 'gpio-updates-for-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (123 commits)
gpio: timberdale: select GPIOLIB_IRQCHIP
gpio: lpc18xx: select GPIOLIB_IRQCHIP
gpio: grgpio: select GPIOLIB_IRQCHIP
gpio: bcm-kona: select GPIOLIB_IRQCHIP
dt-bindings: gpio: vf610: add ngpios and gpio-reserved-ranges
gpio: davinci: select GPIOLIB_IRQCHIP
gpiolib-acpi: Update file references in the Documentation and MAINTAINERS
gpiolib: acpi: Move quirks to a separate file
gpiolib: acpi: Add acpi_gpio_need_run_edge_events_on_boot() getter
gpiolib: acpi: Handle deferred list via new API
gpiolib: acpi: Make sure we fill struct acpi_gpio_info
gpiolib: acpi: Switch to use enum in acpi_gpio_in_ignore_list()
gpiolib: acpi: Use temporary variable for struct acpi_gpio_info
gpiolib: remove unneeded #ifdef
gpio: mpc8xxx: select GPIOLIB_IRQCHIP
gpio: pxa: select GPIOLIB_IRQCHIP
gpio: pxa: Make irq_chip immutable
gpio: timberdale: Make irq_chip immutable
gpio: xgene-sb: Make irq_chip immutable
gpio: davinci: Make irq_chip immutable
...
|
|
Add two tests:
- one test has 'rX <op> r10' where rX is not r10, and
- another test has 'rX <op> rY' where rX and rY are not r10
but there is an early insn 'rX = r10'.
Without previous verifier change, both tests will fail.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250524041340.4046304-1-yonghong.song@linux.dev
|
|
Pull nolibc updates from Thomas Weißschuh:
- New supported architectures: m68k, SPARC (32 and 64 bit)
- Compatibility with kselftest_harness.h
- A more robust mechanism to include all of nolibc from each header
- Split existing features into new headers to simplify adoption
- Compatibility with UBSAN and it is used in the testsuite
- Many small new features focussing on usage in kselftests
* tag 'nolibc-20250526-for-6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/nolibc/linux-nolibc: (83 commits)
selftests: harness: Stop using setjmp()/longjmp()
selftests: harness: Add "variant" and "self" to test metadata
selftests: harness: Add teardown callback to test metadata
selftests: harness: Move teardown conditional into test metadata
selftests: harness: Don't set setup_completed for fixtureless tests
selftests: harness: Implement test timeouts through pidfd
selftests: harness: Remove dependency on libatomic
selftests: harness: Remove inline qualifier for wrappers
selftests: harness: Mark functions without prototypes static
selftests: harness: Ignore unused variant argument warning
selftests: harness: Use C89 comment style
selftests: harness: Add kselftest harness selftest
selftests/nolibc: drop include guards around standard headers
tools/nolibc: move NULL and offsetof() to sys/stddef.h
tools/nolibc: move uname() and friends to sys/utsname.h
tools/nolibc: move makedev() and friends to sys/sysmacros.h
tools/nolibc: move getrlimit() and friends to sys/resource.h
tools/nolibc: move reboot() to sys/reboot.h
tools/nolibc: move prctl() to sys/prctl.h
tools/nolibc: move mount() to sys/mount.h
...
|
|
Pull documentation updates from Jonathan Corbet:
"A moderately busy cycle for documentation this time around:
- The most significant change is the replacement of the old
kernel-doc script (a monstrous collection of Perl regexes that
predates the Git era) with a Python reimplementation. That, too, is
a horrifying collection of regexes, but in a much cleaner and more
maintainable structure that integrates far better with the Sphinx
build system.
This change has been in linux-next for the full 6.15 cycle; the
small number of problems that turned up have been addressed,
seemingly to everybody's satisfaction. The Perl kernel-doc script
remains in tree (as scripts/kernel-doc.pl) and can be used with a
command-line option if need be. Unless some reason to keep it
around materializes, it will probably go away in 6.17.
Credit goes to Mauro Carvalho Chehab for doing all this work.
- Some RTLA documentation updates
- A handful of Chinese translations
- The usual collection of typo fixes, general updates, etc"
* tag 'docs-6.16' of git://git.lwn.net/linux: (85 commits)
Docs: doc-guide: update sphinx.rst Sphinx version number
docs: doc-guide: clarify latest theme usage
Documentation/scheduler: Fix typo in sched-stats domain field description
scripts: kernel-doc: prevent a KeyError when checking output
docs: kerneldoc.py: simplify exception handling logic
MAINTAINERS: update linux-doc entry to cover new Python scripts
docs: align with scripts/syscall.tbl migration
Documentation: NTB: Fix typo
Documentation: ioctl-number: Update table intro
docs: conf.py: drop backward support for old Sphinx versions
Docs: driver-api/basics: add kobject_event interfaces
Docs: relay: editing cleanups
docs: fix "incase" typo in coresight/panic.rst
Fix spelling error for 'parallel'
docs: admin-guide: fix typos in reporting-issues.rst
docs: dmaengine: add explanation for DMA_ASYNC_TX capability
Documentation: leds: improve readibility of multicolor doc
docs: fix typo in firmware-related section
docs: Makefile: Inherit PYTHONPYCACHEPREFIX setting as env variable
Documentation: ioctl-number: Update outdated submission info
...
|
|
Pull lkmm updates from Paul McKenney:
"Update LKMM documentation:
- Cross-references, typos, broken URLs (Akira Yokosawa)
- Clarify SRCU explanation (Uladzislau Rezki)"
* tag 'lkmm.2025.05.25a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
tools/memory-model/Documentation: Fix SRCU section in explanation.txt
tools/memory-model: docs/references: Remove broken link to imgtec.com
tools/memory-model: docs/ordering: Fix trivial typos
tools/memory-model: docs/simple.txt: Fix trivial typos
tools/memory-model: docs/README: Update introduction of locking.txt
|
|
Now that support for up to 12 args is enabled for tracing programs on
ARM64, enable the existing tests for this feature on this architecture.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20250527-many_args_arm64-v3-2-3faf7bb8e4a2@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch exposes the btf_custom_path feature to bpftool, allowing users
to specify a custom BTF file when loading BPF programs using prog load or
prog loadall commands.
The argument 'btf_custom_path' in libbpf is used for those kernels that
don't have CONFIG_DEBUG_INFO_BTF enabled but still want to perform CO-RE
relocations.
Suggested-by: Quentin Monnet <qmo@kernel.org>
Reviewed-by: Quentin Monnet <qmo@kernel.org>
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://lore.kernel.org/r/20250516144708.298652-1-jiayuan.chen@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add some inline-asm tests and C tests where __bpf_trap() or
__builtin_trap() is used in the code. The __builtin_trap()
test is guarded with llvm21 ([1]) since otherwise the compilation
failure will happen.
[1] https://github.com/llvm/llvm-project/pull/131731
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250523205331.1291734-1-yonghong.song@linux.dev
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Use the same test buffers as the traditional iterator and a new BPF map
to verify the test buffers can be found with the open coded dmabuf
iterator.
Signed-off-by: T.J. Mercier <tjmercier@google.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20250522230429.941193-6-tjmercier@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This test creates a udmabuf, and a dmabuf from the system dmabuf heap,
and uses a BPF program that prints dmabuf metadata with the new
dmabuf_iter to verify they can be found.
Signed-off-by: T.J. Mercier <tjmercier@google.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20250522230429.941193-5-tjmercier@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
There was an issue with SO_LINGER: instead of blocking until all queued
messages for the socket have been successfully sent (or the linger timeout
has been reached), close() would block until packets were handled by the
peer.
Add a test to alert on close() lingering when it should not.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20250522-vsock-linger-v6-5-2ad00b0e447e@rbox.co
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a helper function that sets SO_LINGER. Adapt the caller.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20250522-vsock-linger-v6-4-2ad00b0e447e@rbox.co
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Distill the virtio_vsock_sock::bytes_unsent checking loop (ioctl SIOCOUTQ)
and move it to utils. Tweak the comment.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20250522-vsock-linger-v6-3-2ad00b0e447e@rbox.co
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
GCC 15 defaults to C23, which bash can't compile under, so specify gnu17
explicitly.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://patch.msgid.link/20250521212707.1767879-6-Jason@zx2c4.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The current netlink API for WireGuard does not directly support removal
of allowed ips from a peer. A user can remove an allowed ip from a peer
in one of two ways:
1. By using the WGPEER_F_REPLACE_ALLOWEDIPS flag and providing a new
list of allowed ips which omits the allowed ip that is to be removed.
2. By reassigning an allowed ip to a "dummy" peer then removing that
peer with WGPEER_F_REMOVE_ME.
With the first approach, the driver completely rebuilds the allowed ip
list for a peer. If my current configuration is such that a peer has
allowed ips 192.168.0.2 and 192.168.0.3 and I want to remove 192.168.0.2
the actual transition looks like this.
[192.168.0.2, 192.168.0.3] <-- Initial state
[] <-- Step 1: Allowed ips removed for peer
[192.168.0.3] <-- Step 2: Allowed ips added back for peer
This is true even if the allowed ip list is small and the update does
not need to be batched into multiple WG_CMD_SET_DEVICE requests, as the
removal and subsequent addition of ips is non-atomic within a single
request. Consequently, wg_allowedips_lookup_dst and
wg_allowedips_lookup_src may return NULL while reconfiguring a peer even
for packets bound for ips a user did not intend to remove leading to
unintended interruptions in connectivity. This presents in userspace as
failed calls to sendto and sendmsg for UDP sockets. In my case, I ran
netperf while repeatedly reconfiguring the allowed ips for a peer with
wg.
/usr/local/bin/netperf -H 10.102.73.72 -l 10m -t UDP_STREAM -- -R 1 -m 1024
send_data: data send error: No route to host (errno 113)
netperf: send_omni: send_data failed: No route to host
While this may not be of particular concern for environments where peers
and allowed ips are mostly static, systems like Cilium manage peers and
allowed ips in a dynamic environment where peers (i.e. Kubernetes nodes)
and allowed ips (i.e. pods running on those nodes) can frequently
change making WGPEER_F_REPLACE_ALLOWEDIPS problematic.
The second approach avoids any possible connectivity interruptions
but is hacky and less direct, requiring the creation of a temporary
peer just to dispose of an allowed ip.
Introduce a new flag called WGALLOWEDIP_F_REMOVE_ME which in the same
way that WGPEER_F_REMOVE_ME allows a user to remove a single peer from
a WireGuard device's configuration allows a user to remove an ip from a
peer's set of allowed ips. This enables incremental updates to a
device's configuration without any connectivity blips or messy
workarounds.
A corresponding patch for wg extends the existing `wg set` interface to
leverage this feature.
$ wg set wg0 peer <PUBKEY> allowed-ips +192.168.88.0/24,-192.168.0.1/32
When '+' or '-' is prepended to any ip in the list, wg clears
WGPEER_F_REPLACE_ALLOWEDIPS and sets the WGALLOWEDIP_F_REMOVE_ME flag on
any ip prefixed with '-'.
Signed-off-by: Jordan Rife <jordan@jrife.io>
[Jason: minor style nits, fixes to selftest, bump of wireguard-tools version]
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://patch.msgid.link/20250521212707.1767879-5-Jason@zx2c4.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
Jakub Kicinski
Paolo Abeni
Florian Westphal
Antonio Quartulli
Bui Quang Minh
Paul Chaignon
Linus Torvalds
Saket Kumar Bhaskar
Phil Sutter
Pedro Tammela
Mina Almasry
Hangbin Liu
Donald Hunter
Yonghong Song
Alexis Lothoré (eBPF Foundation)
Jiayuan Chen
T.J. Mercier
Michal Luczaj
Jason A. Donenfeld
Jordan Rife