| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Expose a guest_mmu to the guest to allow guest code to use the PTE masks
for page table manipulation. Since guest page tables are not mapped in
the guest by default, zero the PGD in guest_mmu in an attempt to make it
more difficult for new tests to shoot themselves in the foot and assume
that page tables can be immediately used by guest code.
Ultimately, guest code can read CR3 any way, so guest_mmu.pgd doesn't
add a lot of value.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Yosry Ahmed <yosry@kernel.org>
Link: https://patch.msgid.link/20260728174232.2423257-9-yosry@kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add a blank line for visual separation, which is especially useful for
tests that use carriage returns for same-line printing, in case a
failure occurs before a blank line is ever logged by the test.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Yosry Ahmed <yosry@kernel.org>
Link: https://patch.msgid.link/20260728174232.2423257-8-yosry@kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Now that nVMX test codes preserves GPRs across nested VM-Exits
(specifically RBP, RDX, and RDI among others), drop the ucall-specific
hack to avoid clobbering these registers.
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Yosry Ahmed <yosry@kernel.org>
Link: https://patch.msgid.link/20260728174232.2423257-7-yosry@kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Reuse the GPR switching logic for nVMX by defining VMX_SWITCH_GPRS_ASM,
which is essentially the same as SVM_SWITCH_GPRS_ASM but also switches
RAX and doesn't switch RFLAGS, replacing the push/pop of a subset of the
registers.
The long clobber list of registers is no longer needed as registers are
saved and restored appropriately (and not clobbered by L2).
Define VMX_SWITCH_GPRS_ASM before including evmcs.h, such that it can be
used by evmcs_vmlaunch() and evmcs_vmresume().
This replaces the apparently thread-safe push/pop sequence with the
global GPR switching logic used by SVM, which isn't thread-safe at all.
However this is still an improvement because:
- The VMX logic is half-baked and prompts the UCALL clobber hack as it
doesn't properly save/restore everything. Reusing the GPR switching
logic used by SVM allows for dropping that hack.
- Hitting a problem due to half-baked GPR save/restore logic is arguably
more likely than thread-safety. Evidently, adding more involved stress
tests fails on VMX with the existing push/pop sequence. OTOH, there
are no known failures on SVM due to lack of thread-safety fo
save/restore. Only one test currently uses more than one vCPU with
nested (the memstress test).
The logical next step is to move the guest_regs to be per-vCPU,
making it thread-safe for both VMX and SVM in a proper way.
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Yosry Ahmed <yosry@kernel.org>
Link: https://patch.msgid.link/20260728174232.2423257-6-yosry@kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Instead of handling rflags separately, add it to guest_regs. No
functional change intended.
Assisted-by: Gemini:Gemini-Next
Signed-off-by: Yosry Ahmed <yosry@kernel.org>
Link: https://patch.msgid.link/20260728174232.2423257-5-yosry@kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
The assembly code defined by SAVE_GPR_C uses the wrong offsets for some
registers in guest_regs. For example, the offset of RCX should be 0x08
not 0x10. Also, the last offset in the struct (R15) is 0x78, not 0x80,
so the code actually saves and restore beyond the end of gpr64_regs.
Eliminate hardcoded offsets by dynamically generating offsets using
offset_of() and using macros to pass the offsets to assembly as asm
constraints.
To avoid register conflicts in inline assembly (since almost all GPRs are
context-switched), access guest_regs via absolute symbol addressing
(guest_regs + offset) rather than using a base register which could
get overwritten mid-assembly.
While at it, rename SAVE_GPR_C and LOAD_GPR_C to a single macro,
SVM_SWITCH_GPRS_ASM, rename gpr64_regs to guest_regs, and expose it in
processor.h (in preparation for reusing it for VMX).
Assisted-by: Gemini:Gemini-Next
Signed-off-by: Yosry Ahmed <yosry@kernel.org>
Link: https://patch.msgid.link/20260728174232.2423257-4-yosry@kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
The offsets used (0x170 and 0x1f8) are offsets within vmcb_save_area,
not vmcb. The correct offsets should include the base of vmcb_save_area
within vmcb (which is 0x400 -- so 0x570 and 0x5f8).
Instead of just correcting the offsets, use vmcb->save.rax and
vmcb->save.rflags as parameters to the asm block and avoid hardcoding
offsets completely. While at it, also use guest_regs.rax directly
instead of assuming it's at offset 0 of guest_regs.
Note: "+m" must be used for vmcb_rax and vmcb_rflags, as caching those
fields in registers would be wrong as the underlying KVM will update
them in memory.
The same problem was recently fixed (differently) for kvm-unit-tests
[1].
[1]https://lore.kernel.org/all/20260521092311.86030-1-pbonzini@redhat.com/
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260518202514.2037078-1-yosry%40kernel.org?part=1
Signed-off-by: Yosry Ahmed <yosry@kernel.org>
Link: https://patch.msgid.link/20260728174232.2423257-3-yosry@kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Drop the custom defined XSTR() macros in KVM selftests and use
__stringify() instead. Include stringify.h in test_util.h to make it
available for all tests instead of including it in all the tests that
need it, as more tests will start using it.
No functional change intended.
Signed-off-by: Yosry Ahmed <yosry@kernel.org>
Link: https://patch.msgid.link/20260728174232.2423257-2-yosry@kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
The KVM RISC-V allows Svadu FWFT for Guest/VM so add this extension
to get-reg-list test.
Assisted-by: YuanSheng:claude-4.7-opus
Co-developed-by: Quan Zhou <zhouquan@iscas.ac.cn>
Signed-off-by: Quan Zhou <zhouquan@iscas.ac.cn>
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20260713010302.303278-3-inochiama@gmail.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
perf tools fixes for v7.2.
- Update header copies of kernel headers, including const.h, fs.h,
perf_event.h, gfp_types.h, kvm.h, cpufeatures.h, rtnetlink.hp,
msr-index.h, drm.h and socket.h.
- Add some build files related to BPF skels to .gitignore.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Writing a non-zero value to a kdamond's 'refresh_ms' sysfs file should
make DAMON periodically update the read-only sysfs files on its own,
without the user writing update keywords such as 'update_schemes_stats' to
the 'state' file. This behavior has no test coverage.
Add a test that starts a kdamond with refresh_ms set and a 'stat' scheme
whose default access pattern matches every monitored region, then polls
the scheme's 'nr_tried' stats file directly, without requesting an update.
The value can become non-zero only via the periodic refresh, so the test
confirms refresh_ms works; with refresh_ms disabled the stat stays zero
and the test fails.
Link: https://lore.kernel.org/20260602131217.2210912-3-linuxoid@gmail.com
Link: https://lore.kernel.org/20260629144927.134237-3-sj@kernel.org
Signed-off-by: Ruslan Valiyev <linuxoid@gmail.com>
Reviewed-by: SJ Park <sj@kernel.org>
Signed-off-by: SJ Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "selftests/damon: test kdamond refresh_ms", v2.
The kdamond 'refresh_ms' sysfs file makes DAMON periodically update its
read-only sysfs files (DAMOS stats, tuned monitoring intervals and the
kdamond pid) on its own, so users don't have to write update keywords such
as 'update_schemes_stats' to the 'state' file. It has no selftest
coverage.
The first patch adds refresh_ms support to the _damon_sysfs.py test
control module. The second adds a test that sets refresh_ms and confirms
a scheme's stats are updated under sysfs without an explicit update
request; the test skips on kernels that predate the refresh_ms file.
Tested on current mainline under a DAMON-enabled kernel: the new test
passes and the existing DAMON selftests show no new failures.
This patch (of 2):
The Kdamond class has no way to set the kdamond-level 'refresh_ms' sysfs
file, which makes DAMON periodically update the read-only sysfs files
(DAMOS stats, tuned monitoring intervals and the kdamond pid) on its own.
Add a 'refresh_ms' parameter to Kdamond. When it is set (including to
zero, to disable the periodic update), write it before turning the kdamond
on, so tests can exercise the auto-update behavior. Leaving it unset
keeps the previous behavior of not touching the file, so callers running
against kernels without the feature are unaffected.
Link: https://lore.kernel.org/20260602131217.2210912-2-linuxoid@gmail.com
Link: https://lore.kernel.org/20260629144927.134237-2-sj@kernel.org
Signed-off-by: Ruslan Valiyev <linuxoid@gmail.com>
Reviewed-by: SJ Park <sj@kernel.org>
Signed-off-by: SJ Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add a dedicated test at the end of main() that stages memcg_path via sysfs
and verifies its readback. Configure the memcg filter before start(), do
not call commit(), and ignore start() failures so the test does not depend
on CONFIG_MEMCG or cgroup layout. Call stop() for cleanup without
checking its return value.
Link: https://lore.kernel.org/D2B37130D38E09AC+20260601090634.241864-1-niecheng1@uniontech.com
Link: https://lore.kernel.org/20260629144812.134159-3-sj@kernel.org
Signed-off-by: Cheng Nie <niecheng1@uniontech.com>
Signed-off-by: SJ Park <sj@kernel.org>
Reviewed-by: SJ Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "selftests/damon: fix memcg_path staging handling", v5.
Fix a bug in _damon_sysfs.py for damos_filter memcg_path setup, and add
a test case of it in sysfs.py.
This patch (of 2):
DamosFilter stores memcg_path for sysfs staging, but the constructor
assigns it with a trailing comma and therefore turns it into a tuple.
Fix the assignment so memcg_path is stored as the intended string. This
makes memcg filter staging and follow-up validation use the written path
correctly.
Link: https://lore.kernel.org/20260629144812.134159-1-sj@kernel.org
Link: https://lore.kernel.org/464AE12D4BC6B6F4+20260601090519.240482-1-niecheng1@uniontech.com
Link: https://lore.kernel.org/20260629144812.134159-2-sj@kernel.org
Signed-off-by: Cheng Nie <niecheng1@uniontech.com>
Signed-off-by: SJ Park <sj@kernel.org>
Reviewed-by: SJ Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
'hugeapge_size' in drgn_dump_damon_status.py was a dead elif branch.
$fail_reason in sysfs.sh was undefined, silently emptying the error
message. 'exit' instead of 'exist' in sysfs.sh skipped a file existence
check. 'nohugeapge' in sysfs.py broke an action dict lookup.
Fix other wrong strings in the same files.
Link: https://lore.kernel.org/20260601032314.424013-4-kunwu.chan@linux.dev
Link: https://lore.kernel.org/20260629144648.134092-4-sj@kernel.org
Co-developed-by: Wang Lian <lianux.mm@gmail.com>
Signed-off-by: Wang Lian <lianux.mm@gmail.com>
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Signed-off-by: SJ Park <sj@kernel.org>
Reviewed-by: SJ Park <sj@kernel.org>
Cc: Kunwu Chan <chentao@kylinos.cn>
Cc: Wang Lian <lianux.mm@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The expectation print has wrong operator precedence: '%' binds before the
conditional expression, so the else branch prints 'not met' without the
prefix 'expectation (>= 14) is'. Add parentheses to fix it.
Also, '\n'.join() on the list of ints raises TypeError; convert to str in
the list comprehension.
Link: https://lore.kernel.org/20260601032314.424013-3-kunwu.chan@linux.dev
Link: https://lore.kernel.org/20260629144648.134092-3-sj@kernel.org
Co-developed-by: Wang Lian <lianux.mm@gmail.com>
Signed-off-by: Wang Lian <lianux.mm@gmail.com>
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Signed-off-by: SJ Park <sj@kernel.org>
Reviewed-by: SJ Park <sj@kernel.org>
Cc: Kunwu Chan <chentao@kylinos.cn>
Cc: Wang Lian <lianux.mm@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "selftests/damon: misc fixes for test bugs", v3.
This series fixes several bugs in the DAMON selftests. Most are trivial
but makes test output wrong or even silently pass the one test case for
'avail_operation' file existence check.
Patch 1 fixes mutable default arguments in DamonCtx.__init__() that cause
state to leak between test instances.
Patch 2 fixes wrong operator precedence and join TypeError in
damos_tried_regions.py.
Patch 3 fixes several wrong strings that produce dead elif branches,
skipped file existence checks, and broken dict key lookups.
This patch (of 3):
DamonCtx.__init__() uses mutable default values for monitoring_attrs,
targets, and schemes. In Python these are evaluated once at function
definition time, so multiple DamonCtx instances can unintentionally share
the same lists and DamonAttrs instance.
Replace the mutable defaults with None sentinels and initialize the
objects when needed.
Link: https://lore.kernel.org/20260629144648.134092-1-sj@kernel.org
Link: https://lore.kernel.org/20260601032314.424013-2-kunwu.chan@linux.dev
Link: https://lore.kernel.org/20260629144648.134092-2-sj@kernel.org
Co-developed-by: Wang Lian <lianux.mm@gmail.com>
Signed-off-by: Wang Lian <lianux.mm@gmail.com>
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Signed-off-by: SJ Park <sj@kernel.org>
Reviewed-by: SJ Park <sj@kernel.org>
Cc: Kunwu Chan <chentao@kylinos.cn>
Cc: Wang Lian <lianux.mm@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add a userspace filtering tool for page_owner that supports per-fd
filtering with print_mode and NUMA node filters.
Features:
- Three print modes: stack (default), handle, stack_handle
- NUMA node filtering with flexible formats (single: 0, multiple: 0,1,2,
range: 0-3, mixed: 0,2-3)
- Per-file-descriptor filter state for independent filtering
Usage examples:
# Filter by print mode
./page_owner_filter -m handle
./page_owner_filter -m stack_handle
# Filter by NUMA node
./page_owner_filter -n 0
./page_owner_filter -n 0-3
# Combined filters
./page_owner_filter -m stack -n 0,1,2
./page_owner_filter -m handle -n 0,2-3
The tool validates inputs before sending commands to the kernel and
provides clear error messages when the kernel does not support
per-fd filtering.
Link: https://lore.kernel.org/20260707115411.1714314-4-zhen.ni@easystack.cn
Signed-off-by: Zhen Ni <zhen.ni@easystack.cn>
Tested-by: Zi Yan <ziy@nvidia.com>
Acked-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Acked-by: Zi Yan <ziy@nvidia.com>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Tell git to ignore the generated binary for thp_swap_allocator_test.c.
Link: https://lore.kernel.org/20260624150642.19749-1-zenghui.yu@linux.dev
Signed-off-by: Zenghui Yu <zenghui.yu@linux.dev>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This is another occurrence of using getline where the code assumes that
getline allocates memory to store the line, but the pointer passed to it
is uninitialized and potentially a non-null pointer. This violates the
Open Group Spec[1] and caused a segfault in a similar situation in
selftest/clone3/clone3_set_tid. Fix it by initializing the line pointer
to NULL.
The issue has been found by simply grepping through the selftest code
after running into the issue in clone3_set_tid. Whether it segfaults in
its current state is unknown to me. But it's good to be addressed due to
defensive reasons.
Link: https://lore.kernel.org/20260722130246.2135563-3-christian.gellermann@codasip.com
Link: https://pubs.opengroup.org/onlinepubs/9799919799/functions/getline.html [1]
Fixes: 26b4224d9961 ("selftests: expanding more mlock selftest")
Signed-off-by: Chris Gellermann <christian.gellermann@codasip.com>
Acked-by: David Hildenbrand (arm) <david@kernel.org>
Reviewed-by: Lorenzo Stoakes <ljs@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "selftests: Add missing initalization of pointer passed to
getline", v2.
This patch (of 2):
Clone3_set_tid uses getline(&line, ...) in a loop to read the child's
process status. The code expects that getline allocates the buffer for
the line on the first loop iteration. According to the Open Group
Spec[1], char *line has to be null pointer for this:
> ssize_t getline(char **restrict lineptr, ...);
> If *lineptr is a null pointer or if the object pointed to by *lineptr
> is of insufficient size, an object shall be allocated as if by
malloc()
> or the object shall be reallocated as if by realloc()[...].
However, char *line is only declared, leading to an undefined value that
is potentially non-null. In an example run with Musl v1.2.6, the realloc
call[2] of getdelim, which implements getline, triggers a segfault:
./run_kselftest.sh --test clone3:clone3_set_tid
[ 1366.165898] kselftest: Running tests in clone3
...
[ 1367.799244] clone3_set_tid[811]: unhandled signal 11 code 0x1 at
0x0000000000000000 in libc.so[68184,3fbf69f000+4c000]
[ 1367.802808] CPU: 0 UID: 0 PID: 811 Comm: clone3_set_tid Not tainted
..
[ 1367.804188] epc: 0x0000003fbf6b0184
[ 1367.804188] ra : 0x0000003fbf6d4664
[ 1367.804188] sp : 0x0000003fce5f2e40
[ 1367.805314] gp : 0x0000002aaab0dfb8
[ 1367.805314] tp : 0x0000003fbf6f14a8
[ 1367.805314] t0 : 0x0000003fbf63d000
...
Looking at the realloc implementation, Musl mallocs for a null pointer
memory. But for a non-null pointer, it assumes it's passed a valid
pointer to the heap and tries to access its meta-data. This leads to the
segfault we see:
void *realloc(void *p, size_t n)
{
if (!p) return malloc(n);
if (size_overflows(n)) return 0;
struct meta *g = get_meta(p);
...
}
Fix this by properly initializing the line pointer to NULL.
Link: https://lore.kernel.org/20260722130246.2135563-1-christian.gellermann@codasip.com
Link: https://lore.kernel.org/20260722130246.2135563-2-christian.gellermann@codasip.com
Link: https://pubs.opengroup.org/onlinepubs/9799919799/functions/getline.html [1]
Link: https://git.musl-libc.org/cgit/musl/tree/src/stdio/getdelim.c#n38 [2]
Fixes: 41585bbeeef9 ("selftests: add tests for clone3() with *set_tid")
Signed-off-by: Chris Gellermann <christian.gellermann@codasip.com>
Acked-by: David Hildenbrand (arm) <david@kernel.org>
Reviewed-by: Lorenzo Stoakes <ljs@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Pull hardening fixes from Kees Cook:
- lkdtm: fix missed rename of STACKLEAK_ERASING to KSTACK_ERASE
(Haofeng Li)
- selftests/seccomp: Fix pointer type mismatch build error
(Kuan-Ying Lee)
- tests/fortify: Disable -Wstringop-overread (Nathan Chancellor)
* tag 'hardening-v7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
selftests/seccomp: Fix pointer type mismatch build error
selftests/lkdtm: rename STACKLEAK_ERASING to KSTACK_ERASE
fortify: Disable -Wstringop-overread in tests
|
|
Read events/bpf_testmod/bpf_testmod_test_read/btf_ids and verify the
exported FUNC_PROTO matches the testmod tracepoint signature
(__data, struct task_struct *task, struct bpf_testmod_test_read_ctx
*ctx) and the record struct trace_event_raw_bpf_testmod_test_read
carries the fields declared by TP_STRUCT__entry.
Use the testmod tracepoint so the test exercises the module/split-BTF
path (btf_relocate_id) rather than vmlinux only, and falls back from
/sys/kernel/tracing to /sys/kernel/debug/tracing when tracefs is not
mounted at the new location.
Link: https://patch.msgid.link/20260518-generic_tracepoint-v2-3-b755a5cf67bb@meta.com
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Commit 5cb53743e1ff ("selftests: net: Add a test for BIG TCP in UDP
tunnels") used iptables match comment, which was missed from the CI
kernel config. Add the missing config option.
Signed-off-by: Alice Mikityanska <alice@isovalent.com>
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Link: https://patch.msgid.link/20260723140241.132120-1-alice.kernel@fastmail.im
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Several CI runs failed in the libarena parallel tests with -4 (-EINTR) [1],
which says nothing about what actually went wrong.
Two workers can fail like this:
worker 1: gives up, e.g. the rendezvous times out, sets test_abort and
returns its own error (-ETIMEDOUT)
worker 2: sees test_abort and returns -EINTR
-EINTR only means "someone else already gave up", so it carries no
information. Which of the two gets reported depends on the order
pthread_join() collects them, because
err = err ?: (long)thread_ret;
keeps the first non-zero value and drops the rest. When the -EINTR worker
comes first, the error describing the actual failure is lost.
Skip -EINTR entirely: a worker only returns it once another worker has
already reported the real error, so report and log only the real errors.
It is still unclear whether the timeouts come from CI load or from a
problem in the test itself. Report the error accurately first, so the next
failure can be diagnosed.
[1]:
https://github.com/kernel-patches/bpf/actions/runs/29867905253/job/88764463566
https://github.com/kernel-patches/bpf/actions/runs/29878191901/job/88794845824
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/bpf/20260723061347.398591-1-jiayuan.chen@linux.dev
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
Add a kselftest that builds a PRP RedBox (interlink) with a SAN behind the
interlink and a peer DANP, and checks bidirectional unicast across the
interlink, preservation of the SAN source MAC on the PRP network, and that
the proxy-announce supervision frame carries the RedBox-MAC TLV (Type 30)
terminated by an EOT marker. It reuses the hsr_common.sh / lib.sh helpers
and skips cleanly on a kernel or iproute2 without PRP interlink support.
The background ping is killed by its exact PID: ip netns exec does not
isolate the PID namespace, so a pattern-based pkill could hit unrelated
processes on the host.
Signed-off-by: Xin Xie <xiexinet@gmail.com>
Link: https://patch.msgid.link/20260717201457.54-5-xiexinet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
struct popup_action has a thread but this is duplicated in the
map_symbol. Remove the non-map_symbol version so that there's only ever
1 thread with a popup_action.
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
If a thread isn't given to map_symbol__get_arch(), try harder to determine
the arch for disassembly. Do this by utilizing fallback paths such as
reading the e_machine from a map's DSO ELF header for user-space libraries.
Additionally, rely on map__kmaps() and maps__machine() to reliably extract
the recorded machine environment and e_machine for kernel and kallsyms maps,
perfectly preventing silent, incorrect host fallbacks to uname() during
cross-platform Capstone annotation sessions.
At the same time, ensure all remaining uses of a map_symbol's thread pointer
do not assume it is non-NULL to eliminate UI segmentation faults, and remove
the fragile, redundant thread__get_arch() function to streamline the
annotate and disassembly subsystem architecture.
Fixes: 0e26ba5a8774 ("perf disasm: Refactor arch__find and initialization of arch structs")
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
In hists_browser__zoom_map(), the active dso is assigned as a raw
pointer to hists->dso_filter without acquiring a reference using
dso__get(). This creates a potential use-after-free defect if the
underlying dso is released while the filter remains active.
Fix it by properly acquiring a reference via dso__get() when assigning
the filter, and releasing it with dso__put() when clearing it.
Additionally, since the browser stack relies on pstack__new() and deletes
it completely upon exiting, we must fully reset the persistent hists
structure by un-eliding columns and recalculating histogram filter
states for dso, thread, and symbols upon exit to guarantee immaculate,
uncorrupted state across browser tab switching.
Closes: https://lore.kernel.org/linux-perf-users/20260709170834.52F1A1F000E9@smtp.kernel.org/
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Populates the map_symbol thread in the UI code to fix the e_machine
lookup for cross-platform disassembly when using the annotate action.
At the same time, refactor the UI options and actions generation to
comply with the perf subsystem's strict reference counting abstraction
requirements for 'struct map_symbol' and 'struct thread'. Introduce
explicit reference acquiring via map_symbol__copy() and thread__get() for
menu items, safely clean them up between menu iterations using a new
free_popup_actions() helper, and utilize insulated temporary action
variables for direct hotkey handler execution.
Fixes: 0e26ba5a8774 ("perf disasm: Refactor arch__find and initialization of arch structs")
Reported-by: Josh Stone <jistone@redhat.com>
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
In add_script_opt(), when the browser selection has no valid hist_entry
(for example, when all entries are filtered out or the trace is empty),
hist_browser__selected_entry() returns NULL.
Add an explicit check for he == NULL prior to accessing he->time to avoid a
potential NULL pointer dereference crash.
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
In evsel__hists_browse(), the local stack array 'buf' is assigned
directly to the persistent 'hists->symbol_filter_str' pointer. When the
browser returns or is exited, this dangling pointer remains active in
the 'hists' struct and is read asynchronously by the perf top background
timer, triggering a stack use-after-return.
Fix it by properly duplicating the input string using strdup(), safely
invoking zfree() to prevent memory leaks when overwriting, and cleanly
resetting and freeing the symbol filter string upon exiting the browser.
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Pull misc fixes from Andrew Morton:
"13 hotfixes. All are cc:stable. 11 are for MM. All are singletons -
please see the changelogs for details"
* tag 'mm-hotfixes-stable-2026-07-27-14-18' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
fs/proc/task_mmu: fix PAGEMAP_SCAN written state for PMD holes
mm/hugetlb: fix list corruption in allocate_file_region_entries()
mm: mglru: fix stale batch updates after memcg reparenting
selftest: fix headers in fclog.c
ocfs2: fix boundary check in ocfs2_check_dir_entry() to use buffer offset
mm/percpu-km: fix bitmap overflow and accounting in pcpu_create_chunk()
mm/util: don't read __page_2 for order-1 folios in snapshot_page()
mm/hugetlb: fix swap entry corruption when clearing uffd-wp at fork()
mm: migrate_device: fix pte_pfn/pte_dirty called on non-present PTE
fs/proc/task_mmu: fix PAGEMAP_SCAN written state for unpopulated ptes
userfaultfd: wait on source PMD during UFFDIO_MOVE
lib: test_hmm: use device devt for coherent device range selection
mm/vmstat: fold stranded per-cpu node stats when a node comes online
|
|
Extend the set_sregs test to cover various bits in EFER. Update
TEST_INVALID_CR_BIT() to operate on EFER as well as CRx (and rename it
accordingly). Add test cases to check that EFER bits are disallowed
without the relevant CPUID enablement.
Assisted-by: Gemini:unknown-version
Signed-off-by: Yosry Ahmed <yosry@kernel.org>
Link: https://patch.msgid.link/20260713180153.2728382-3-yosry@kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Test the failfs semantics and both new entry points:
- fchdir(FD_FAILFS_ROOT):
* working directory lookups and getcwd() fail
* other sentinels are rejected
* the state is recoverable while the root is untouched
- fchroot() with regular fds:
* chroot parity
* CAP_SYS_CHROOT required
* ENOTDIR/EBADF/EINVAL checks
- fchroot(FD_FAILFS_ROOT):
* absolute lookups, stat, statfs and opens of the root including O_PATH fail with EOPNOTSUPP
* dirfd-anchored I/O keeps working
* ".." walks clamp at the top of the mount tree
* /proc magic links resolve but can't be stat through
* absolute symlinks fail while relative symlinks keep resolving
- Unprivileged entry requires no_new_privs and is rejected for
chrooted callers and for a shared fs_struct
- entering makes the task count as chrooted so user namespace creation
fails
- Nothing can be mounted on top of failfs and OPEN_TREE_CLONE is
rejected; the overmount test runs in a private mount namespace so a
regression cannot touch the host root
- setns() to a kept mount namespace fd restores root and working
directory
- The failfs root is inherited across fork() and absolute exec fails
- Exec by fd of a dynamically linked binary fails on opening its
absolute PT_INTERP interpreter
The exec tests run the exec in a child so a wrongly successful exec
cannot replace the test image and masquerade as a pass.
Link: https://patch.msgid.link/20260724-work-failfs-v2-6-485dabbae185@kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
Wire up the fchroot() system call as number 472 on (nearly) all
architectures and sync the mirrored copies of the syscall tables and
the asm-generic unistd.h under tools/.
Link: https://patch.msgid.link/20260724-work-failfs-v2-5-485dabbae185@kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
New HW no longer implements a separate class for latency-sensitive QPs
and advertises this by a new cap bit.
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Regenerate enum_defs.autogen.h from the current vmlinux.h to pick up the SCX
enum changes accumulated since the last regeneration, including the
SCX_REENQ_LOCAL_MAX_REPEAT to SCX_REENQ_MAX_REPEAT rename.
Reported-by: Andrea Righi <arighi@nvidia.com>
Link: https://lore.kernel.org/all/amZsEbZJdDgjstPF@gpd4/
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The macro lost its last user when select() was reimplemented on top of
pselect6 for every architecture; sys/select.h no longer looks at it,
and nothing else in the tree does either. See commit 668e43737279
("tools/nolibc/select: drop non-pselect based implementations").
The comment that goes with it is stale for the same reason, as neither
architecture can end up calling old_select any more.
Drop both from arch-x86.h and arch-arm.h.
Cc: Alviro Iskandar Setiawan <alviro.iskandar@gnuweeb.org>
Signed-off-by: Ammar Faizi <ammarfaizi2@openresty.com>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
Pull vfs fixes from Christian Brauner:
- vfs: Preserve the ACL_DONT_CACHE state in forget_cached_acl().
ACL_DONT_CACHE is meant to be a permanent opt-out from ACL caching
which FUSE relies on for servers that don't negotiate FUSE_POSIX_ACL.
The helper replaced it with ACL_NOT_CACHED, silently re-enabling the
cache, and as fuse doesn't invalidate the cache for such servers a
properly timed get_acl() returned stale ACLs. Comes with a fuse
selftest reproducing this.
- pidfs:
- Preserve PIDFD_THREAD when a thread pidfd is reopened via
open_by_handle_at(). PIDFD_THREAD shares the O_EXCL bit which
do_dentry_open() strips after the flags have been validated, so
the reopened pidfd silently became a process pidfd. Comes with a
selftest.
- Add a pidfs_dentry_open() helper so the regular pidfd allocation
path and the file handle path share the code that forces O_RDWR
and reapplies the pidfd flags that do_dentry_open() strips.
- Handle FS_IOC32_GETVERSION in the compat ioctl path.
- Make pidfs_ino_lock static.
- iomap:
- Fix the block range calculation in ifs_clear_range_dirty() so a
partial clear doesn't drop the dirty state of blocks the range
only partially covers.
- Support invalidating partial folios so a partial truncate or hole
punch with blocksize < foliosize doesn't leave stale dirty bits
behind.
- Only set did_zero when iomap_zero_iter() actually zeroed
something.
- Guard ifs_set_range_dirty() and ifs_set_range_uptodate() against
zero-length ranges where the unsigned last-block calculation
underflows and bitmap_set() writes far beyond the ifs->state
allocation.
- Don't merge ioends with different io_private values as the merge
could leak or corrupt the private data of the individual ioends.
- exec:
- Raise bprm->have_execfd only once the binfmt_misc interpreter has
actually been opened. The flag was set as soon as a matching 'O'
or 'C' entry was found. If the interpreter open failed with
ENOEXEC the exec fell through to the next binary format with
have_execfd raised but no executable staged and begin_new_exec()
NULL derefed past the point of no return.
- Fix an unsigned loop counter wrap in transfer_args_to_stack() on
nommu. An overlong argument or environment string pushes bprm->p
below PAGE_SIZE, the stop index becomes zero, and the loop never
terminates, wrapping its counter and copying garbage from in
front of the page array into the new process stack.
- Make binfmt_elf_fdpic only honour the first PT_INTERP like
binfmt_elf does. Each additional PT_INTERP overwrote the previous
interpreter, leaking the name allocation and the interpreter file
reference together with the write denial open_exec() took,
leaving the file unwritable for as long as the system runs.
- overlayfs:
- Compare the full escaped xattr prefix including the trailing dot.
An xattr like "trusted.overlay.overlayfoo" was misclassified as
an escaped overlay xattr.
- Check read access to the copy_file_range() source with the
source's mounter credentials.
- super: Thawing a filesystem whose block device was frozen with
bdev_freeze() deadlocked. Dropping the last block layer freeze
reference from under s_umount ends up in fs_bdev_thaw() which
reacquires s_umount on the same task. Pin the superblock with an
active reference instead and call bdev_thaw() without holding
s_umount.
- procfs: Return EACCES instead of success when the ptrace access check
for namespace links fails.
- afs: Use afs_dir_get_block() rather than afs_dir_find_block() for
block 0 in afs_edit_dir_remove(), matching afs_edit_dir_add().
- Push the memcg gating of ->nr_cached_objects() down into the btrfs
and shmem callbacks instead of skipping every callback during
non-root memcg reclaim. The blanket check short-circuited XFS whose
inode reclaim hook is intentionally driven from per-memcg contexts to
free memcg-charged slab.
- eventpoll: Pin files while checking reverse paths.
Since struct file became SLAB_TYPESAFE_BY_RCU a concurrent close
could free and recycle the file under the check which then took and
dropped the f_lock of whatever live file now occupies that slot.
* tag 'vfs-7.2-rc5.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (24 commits)
super: fix emergency thaw deadlock on frozen block devices
pidfs: make pidfs_ino_lock static
eventpoll: pin files while checking reverse paths
fs: push nr_cached_objects memcg gating into individual filesystems
afs: Fix afs_edit_dir_remove() to get, not find, block 0
iomap: prevent ioend merge when io_private differs
iomap: add comments for ifs_clear/set_range_dirty()
iomap: fix out-of-bounds bitmap_set() with zero-length range
iomap: fix incorrect did_zero setting in iomap_zero_iter()
iomap: support invalidating partial folios
iomap: correct the range of a partial dirty clear
fs/super: fix emergency thaw double-unlock of s_umount
pidfs: handle FS_IOC32_GETVERSION in compat ioctl
ovl: check access to copy_file_range source with src mounter creds
proc: Fix broken error paths for namespace links
pidfs: add pidfs_dentry_open() helper
selftests/pidfd: check PIDFD_THREAD survives open_by_handle_at()
pidfs: preserve thread pidfds reopened by file handle
ovl: fix trusted xattr escape prefix matching
selftests/fuse: add ACL_DONT_CACHE regression test
...
|
|
Pull char/misc driver fixes from Greg KH:
"Here are a number of small char/misc/etc driver fixes for 7.2-rc5 that
resolve a bunch of different reported issues. Included in here are:
- rust_binder error message reporting fix
- stratix10-svc firmware driver fixes
- mei driver fix
- intel_th hardware tracing driver fix
- comedi driver fix
- uio_hv_generic driver fix
- ntsync selftest fix
- nsm misc driver fix
- some MAINTAINER file updates
All of these have been in linux-next for over a week with no reported
issues"
* tag 'char-misc-7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
MAINTAINERS: Update wine-devel list address
rust_binder: only print failure if error has source
intel_th: fix MSC output device reference leak
misc: nsm: pin the module while the device is open
mei: bus: access mei_device under device_lock on cleanup
misc: nsm: only unlock nsm_dev on post-lock error paths
selftests: ntsync: correct CONFIG_NTSYNC name
comedi: comedi_parport: deal with premature interrupt
uio_hv_generic: Bind to FCopy device by default
MAINTAINERS: Add Greg Kroah-Hartman to GPIB
firmware: stratix10-svc: fix teardown order in remove to prevent race
firmware: stratix10-svc: handle NO_RESPONSE in async poll
firmware: stratix10-svc: fix FCS SMC call kernel-doc
firmware: stratix10-svc: fix memory leaks and list corruption bugs
|
|
Pull tracing fixes from Steven Rostedt:
- Move rb_desc->nr_page_va before updating dynamic array
The rb_descr->page_va is a dynamic array counted by nr_page_va. But
the updating of the page_va[] is done before the nr_page_va is
incremented causing a build with CONFIG_UBSAN_BOUNDS to flag it as an
overflow.
Move the increment of the counted by value before the array element
is updated.
- Propagate errors from remote event bulk updates
The return value of trace_remote_enable_event() was not being checked
by remote_events_dir_enable_write() where it would silently fail.
Have it check the return value and propagate that back up to user
space.
- Fix resource leak on mmiotrace trace_pipe close
The mmiotrace tracer was created in 2008 before the trace_pipe had a
close callback to allow tracers to do clean up from trace_pipe open.
The trace_pipe close cleanup callback was added in 2009 but the
mmiotrace tracer was not updated. It had a hack to do the cleanup in
the read call, where it may leak if user space did not read the
entire buffer.
Add a callback to mmiotrace trace_pipe close do to the cleanup
properly.
- Fix a possible NULL pointer dereference in the mmiotrace tracer
If the mmio_pipe_open() fails to find a PCI device, it will set the
hiter->dev pointer to NULL. The read function will blindly
dereference that pointer. Fix the read call to check to see if that
pointer is populated before dereferencing it.
- Fix union collision of module and refcnt for dynamic events
In 'struct trace_event_call', the 'module' pointer and the 'refcnt'
atomic variable share the same memory space in a union. The filter on
module logic only checked if the 'module' was set to determine if the
event belonged to the module. As dynamic events are always builtin,
it doesn't need the 'module' field of the structure and used a
refcount. But the module filtering logic would then mistaken these
dynamic events as a module and call module_name(event->module) on it.
Add a check to see if the event is a dynamic event and if so, do not
check it for being part of the given module.
- Reset the top level buffer in selftests before running instances
The ftracetest selftest initializes each instance before executing
the tests. But it does not reset the top level buffer. Dynamic events
are only added and removed by the top level so any left over dynamic
events will not be removed by the reset in the instances.
Left over dynamic events can cause the tests to incorrectly fail.
Reset the top level buffer before running the instances.
- Make the context_switch counter 64 bit
The code to read user space for a system call trace event or for a
trace_marker will disable migration, enable preemption, read user
space into a per CPU buffer, disable preemption and enable migration
again. It checks if the per CPU context switch counter to see if it
changed, and if it did not, it would know that the per CPU buffer was
not touched by another task.
But the save counter was 32 bit and it would compare it to the 64 bit
context_switch variable. A long running system could have the
context_switch variable greater that 1<<32 in which case the compare
will always fail. The compare will promote the 32 bit int saved value
to 64 bit and compare it to the full 64 bit counter. Since the top 32
bits of the saved value was zero, it would never match.
- Fix a use-after-free of the event_enable trigger
The event_enable trigger allows for enabling one event when another
event is triggered. When the trigger is removed, it must go through a
synchronization phase to make sure it is not triggered again. The
trigger itself is delayed by the "bulk delay" logic that was recently
added. But the code that frees the event_enable data used to rely on
the trigger code to do the synchronization. Now that the code uses
the call RCU functions (and a workqueue), that delay no longer is
there.
Add a callback private_data_free() function that allows triggers to
clean up data after the synchronization phase has completed.
- Move the module_ref counter into the delay callback
Since an event of the event_enable trigger can enable an event for a
module, it ups the module ref count for that event's module. This
prevents the event from trying to enable an event that no longer
exists and cause a use-after-free bug.
The ref counter was set back down when the trigger was removed but
not after thy synchronization phase. This could lead to the module
data being accessed after module was unloaded.
Move the module ref decrement into the private_data_free() callback
of the event_enable trigger.
- Add mutex to protect parser in ftrace filtering
The set_ftrace_filter file uses a parsing descriptor that is
allocated at open and modified by writes. If multiple threads were to
write to the descriptor at the same time, it can corrupt the parser.
Add a mutex around the modifications of the parser descriptor.
- Fix possible corruption in perf syscall tracing
The perf system call trace events can now read user space. To do so,
the reads of user space enable preemption and disables it again.
During this time that preemption is enabled, the task can migrate.
The perf event list head is assigned via a per CPU pointer. It is
done before the user space part is called. If the user space reading
migrates the task to another CPU, then the head pointer is no longer
valid.
Re-assign the head pointer after the reading of user space to keep it
using the correct data.
* tag 'trace-v7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: perf: Fix stale head for perf syscall tracing
ftrace: Add global mutex to serialize trace_parser access
tracing: Delay module ref count for "enable_event" trigger
tracing: Fix use-after-free freeing trigger private data
tracing: Fix context switch counter truncation
selftests/ftrace: Reset triggers at top level before instance loop
tracing: Fix union collision of module and refcnt for dynamic events
tracing: Fix mmiotrace possible NULL dereferencing of hiter->dev
tracing: Fix resource leak on mmiotrace trace_pipe close
tracing: Propagate errors from remote event bulk updates
tracing/remotes: Fix page_va[] access before counter update in trace_remote_alloc_buffer()
|
|
Move luo_test_utils.[ch] into a lib/ directory and make libliveupdate
library. Pull the rules to build them out into a separate
libliveupdate.mk script. This will enable these utilities to be
also built by and used within other selftests (such as VFIO).
Update path in vmtest.sh as that one uses hardcoded path for util.
No functional change intended.
Co-developed-by: David Matlack <dmatlack@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Acked-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Vipin Sharma <vipinsh@google.com>
Link: https://patch.msgid.link/20260720203202.1964557-3-vipinsh@google.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
|
|
Use luo_test_utils.c for all live update ioctl calls. Remove direct
ioctl calls in liveupdate.c. This avoids code duplication and use common
interface.
While at it, make ioctl error check stricter as liveupdate APIs don't
return postive numbers as a valid result.
Co-developed-by: David Matlack <dmatlack@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Signed-off-by: Vipin Sharma <vipinsh@google.com>
Link: https://patch.msgid.link/20260720203202.1964557-2-vipinsh@google.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
|
|
Add a kselftest script that exercises per-netns RDMA device naming
with RXE. Cover duplicate names across namespaces, move conflict
handling, move-with-rename, and same-namespace rename requests.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260716132316.1495242-15-jiri@resnulli.us
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Try to remove some, but not all duplicate toolchain definitions. In
these instances, their makefiles already include
tools/scripts/Makefile.include which defines these in a consistent way.
STRIP is the only one that was set with an '=', but I don't think it
was significant so that difference can be dropped.
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Acked-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Documentation/kbuild/llvm.rst mentions that readelf is included in the
LLVM toolchain, but it's not currently included in this block.
Add it so that LLVM=... options also apply to readelf. Users in tools/
were Perf which was hardcoding it, and another was the BPF makefile.
Both already include Makefile.include so convert them to use the new
variables.
Where readelf wasn't doing anything arch specific, use HOSTREADELF
because it's more likely to be installed.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Acked-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
These blocks are quite big and unreadable without indentation. Indent
them.
No functional changes intended.
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The version of LLVM tools can be given on the build command with
LLVM=-15, but this isn't applied to all tools. For example $(CC) gets
versioned, but $(CLANG) doesn't. This causes a Perf build with LTO=1 to
fail with an error about mixed clang versions:
ld.lld: error: libperf/core.o: Unknown attribute kind (86)
(Producer: 'LLVM18.1.8' Reader: 'LLVM 15.0.7')
This file has two "ifneq ($(LLVM),)" blocks adjacent to each other, so
merge these blocks making it obvious that all tools should be versioned
consistently and there is nothing special about each block.
This also reveals that ?= and "allow-override" are used inconsistently
between the blocks. "allow-override" is technically only required for
builtin variables, but isn't only used on them, and doesn't do any harm
if used on a non-builtin. Make them all "allow-override" for
consistency. The only functional difference this will cause is if there
is a file level definition of one of the variables followed by an
"#include of Makefile.include" which will now overwrite. But this isn't
done and in a later commit some of the duplicate definitions will be
removed for good measure.
There are also some other LLVM tools that are not defined here and will
be moved in a later commit.
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Fixes: e9c281928c24 ("kbuild: Make $(LLVM) more flexible")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Pull rust fixes from Miguel Ojeda:
"Toolchain and infrastructure:
- 'zerocopy' crates: update to v0.8.54 to fix a modpost error under
'CONFIG_CC_OPTIMIZE_FOR_SIZE=y'.
There are actually two updates in the PR: the one to v0.8.52 is
fairly large and was originally not intended for a fixes PR, but the
actual fix landed in the v0.8.54 one. Thus I included both here.
The v0.8.52 update includes two things upstream added for us:
'--cfg no_fp_fmt_parse' to avoid a local workaround, and the new
'most_traits' feature.
The good news is that, after these updates, the delta with upstream
is now trivial: only an identifier prefix change and the SPDX
parentheses.
- Fix an objtool warning by adding one more 'noreturn' function for
Rust 1.99.0 (expected 2026-10-01).
- Clean up new 'semicolon_in_expressions_from_macros' lint errors for
Rust 1.99.0 (expected 2026-10-01). The lint can be allowed, but it
will be a hard error at some point in the future anyway, so clean it
up now.
- Locally allow new 'suspicious_runtime_symbol_definitions' lint for
Rust 1.98.0 (expected 2026-08-20).
- Globally allow 'clippy::unwrap_or_default' lint since it relies on
optimizations -- under 'CONFIG_CC_OPTIMIZE_FOR_SIZE=y' it does not
work well.
'kernel' crate:
- 'time' module: fix 'Delta::as_micros_ceil()' to round negative values
correctly"
* tag 'rust-fixes-7.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: time: fix as_micros_ceil() to round correctly for negative Delta
rust: device: avoid trailing ; in printing macros
objtool/rust: add one more `noreturn` Rust function for Rust 1.99.0
rust: zerocopy: update to v0.8.54
rust: zerocopy: update to v0.8.52
rust: allow `clippy::unwrap_or_default` globally
rust: allow `suspicious_runtime_symbol_definitions` lint for Rust >= 1.98
|
Yosry Ahmed
Inochi Amaoto
Namhyung Kim
Ruslan Valiyev
Cheng Nie
Kunwu Chan
Zhen Ni
Zenghui Yu
Chris Gellermann
Linus Torvalds
Mykyta Yatsenko
Alice Mikityanska
Jiayuan Chen
Xin Xie
Ian Rogers
Christian Brauner
Leon Romanovsky
Tejun Heo
Ammar Faizi
Vipin Sharma
Jiri Pirko
James Clark